Extracellular Polyhydroxyalkanoate Depolymerases Research Articles

Identification and characterization of a novel extracellular polyhydroxyalkanoate depolymerase in the complete genome sequence of Undibacterium sp. KW1 and YM2 strains.

Polyhydroxyalkanoate (PHA) is a biodegradable polymer that is synthesized by a wide range of microorganisms. One of the derivatives of PHA, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) has flexible material properties and low melting temperature. We have previously demonstrated that PHBH is degradable in a freshwater environment via the formation of biofilm on the surface of the PHBH film. Undibacterium sp. KW1 and YM2, which were isolated from the biofilm present on the PHBH film in the freshwater sample, were shown to have PHBH-degrading activity. In this study, the complete genome sequence of KW1 and YM2 revealed that the extracellular PHA depolymerase gene, designated as phaZUD, was present in their chromosomes. Sequence analysis revealed that PhaZUD contained four domains: a signal peptide, catalytic domain, linker domain, and substrate-binding domain. Escherichia coli harboring a PhaZUD-expressing plasmid showed PHBH-degrading activity in LB medium containing 1 wt% PHBH powder. The recombinant His-tagged PhaZUD from KW1 and YM2 was purified from the culture supernatant and shown to have PHBH-degrading activity at the optimum temperature of 35 and 40°C, respectively. When the degradation product in the PHBH solution was treated with PhaZUD and assayed by LC-TOF-MS, we detected various oligomer structures, but no more than pentamers, which consist of 3-hydroxybutyrate and 3-hydroxyhexanoate. These results demonstrated that PhaZUD may have an endo-type extracellular PHA depolymerase activity.

Characterization of an Extracellular Polyhydroxyalkanoate Depolymerase from Streptomyces sp. SFB5A

Characterization of an Extracellular Polyhydroxyalkanoate Depolymerase from Streptomyces sp. SFB5A

Poly(-β-hydroxybutyrate) (PHB) depolymerase PHAZ Pen from Penicillium expansum: purification, characterization and kinetic studies.

Very few studies have been dedicated to R-hydroxyacids (R-HA) production using extracellular polyhydroxyalkanoate depolymerases (ePhaZs). Penicillium expansum produced maximum extracellular polyhydroxybutyrate depolymerase (~6 U/mL) by 72 h when grown in mineral salt medium containing 0.2 % w/v PHB, pH 5.0, at 30 °C and 200 rpm shaking conditions. Partial purification of the extracellular poly(-β-hydroxybutyrate) depolymerase PHAZPen from P. expansum by two steps using ammonium sulphate (80 % saturation) and affinity chromatography using concanavalin A yielded 22.76-fold purity and 43.15 % recovery of protein. The enzyme composed of a single polypeptide chain of apparent molecular mass of 20 kDa, as determined by SDS-PAGE, stained positive for glycoprotein by periodic–schiff base (PAS) staining. Optimum enzyme activity was detected between pH 4.0 and 6.0 at 45–50 °C with pH 5.0 and 50 °C supporting maximum activity. The enzyme was stable between pH 4.0 and 6.0 at 55 °C for 1 h with a residual activity of almost 70–80 %. The enzyme was completely inhibited by 1 mM DTT/1 mM HgCl2 and N-ethylmaleimide (10 mM) indicating the importance of essential disulphide bonds (cystine residues) and tyrosine for enzyme activity or probably for maintaining the native enzyme structure. Among the various divalent and trivalent metal ions, mercuric chloride, ferric citrate and ferrous sulphate inhibited enzyme activity. The enzyme showed substrate specificity towards only PHB and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and no other lipid or other p-nitrophenyl fatty acids or with polycaprolactone, showing that it was a true depolymerase and not any lipase or cutinase. Preliminary investigation revealed β-hydroxybutyrate as the end product of PHB hydrolysis by P. expansum, suggesting that the enzyme acted principally as an exo-type hydrolase. The above properties when compared with other fungal PHB depolymerases reported till date suggest the distinct nature of the PHB depolymerase of P. expansum.

Cell system engineering to produce extracellular polyhydroxyalkanoate depolymerase with targeted applications

Novel platforms based on the application of bacterial cell systems as factories for production of new bioproducts open avenues and dramatically expand the catalogue of existing biomaterials. Herein, we designed the strategy based on in vivo production of extracellular Pseudomonas fluorescens GK13 (PhaZGK13) depolymerase to degrade previously biosynthesized polyhydroxyalkanotes (PHAs) or to obtain 3-hydroxyalkanoic acids (HAs). With this aim, extracellular PhaZGK13 was produced in recombinant strains and the optimal conditions for controlled release of HAs and oligomers by growing cells were set up with a particle suspension of 14C-labelled PHA, being maximal after 24h of incubation. Genetic modification of key factors involved in fatty acids metabolism revealed the influence of an active β-oxidation pathway on the extracellular degradation of PHA and subsequent HAs isolation. The highest HAs production was obtained using Pseudomonas putida KT2442 fadB mutant (0.27mg/mL) due to the reduced ability of this strain to metabolize the degradation products. The system was applied to produce new added value HAs harboring thioester groups in the side chain from the functionalized mcl-PHA, PHACOS. Remarkably, hydrolyzed PHACOS showed greater potential to inhibit Staphylococcus aureusT growth when compared to that of degradation products of non functionalized polyhydroxyoctanoate-co-hexanoate P(HO-co-HH).

Purification and characterization of two extracellular polyhydroxyalkanoate depolymerases from Pseudomonas mendocina

Two polyhydroxyalkanoate depolymerases, PHAase I and PHAase II, were purified to homogeneity from the culture supernatant of an effective PHA-degrading bacterium, Pseudomonas mendocina DS04-T. The molecular masses of PHAase I and PHAase II were determined by SDS-PAGE as 59.4 and 33.8 kDa, respectively. Their optimum pH values were 8.5 and 8, respectively. Enzymatic activity was optimal at 50 °C. Both purified enzymes could degrade PHB, PHBV, and P(3HB-co-4HB). Addition of Na(+) and K(+) slightly increased the rate of PHAase II. EDTA significantly inhibited PHAase II but not PHAase I. Mercaptoethanol and H2O2 also inhibited the activities of both enzymes.

Biodegradability studies of polyhydroxyalkanoate (PHA) film produced by a marine bacteria using Jatropha biodiesel byproduct as a substrate

Polyhydroxyalkanoates are water-insoluble, hydrophobic polymers and can be degraded by microorganisms that produce extracellular PHA depolymerase. The present work was aimed to evaluate the degradability of Polyhydroxyalkanoate film produced by Halomonas hydrothermalis using Jatropha biodiesel byproduct as a substrate. PHB films were subjected to degradation in soil and compared with the synthetic polymer (acrylate) and blend prepared using the synthetic polymer (acrylate) and PHB. After 50 days, 60% of weight loss in PHB film and after 180 days 10% of blended film was degraded while no degradation was found in the synthetic film. Scanning electron microscopy and confocal microscopy revealed that after 50 days the PHB film and the blended film became more porous after degradation while synthetic film was not porous. The degradative process was biologically mediated which was evident by the control in which the PHB films were kept in sterile soil and the films showed inherent integrity over time. The TGA and DSC analysis shows that the melting temperatures were changed after degradation indicating physical changes in the polymer during degradation.

The PHA Depolymerase Engineering Database: A systematic analysis tool for the diverse family of polyhydroxyalkanoate (PHA) depolymerases

BackgroundPolyhydroxyalkanoates (PHAs) can be degraded by many microorganisms using intra- or extracellular PHA depolymerases. PHA depolymerases are very diverse in sequence and substrate specificity, but share a common α/β-hydrolase fold and a catalytic triad, which is also found in other α/β-hydrolases.ResultsThe PHA Depolymerase Engineering Database (DED, ) has been established as a tool for systematic analysis of this enzyme family. The DED contains sequence entries of 587 PHA depolymerases, which were assigned to 8 superfamilies and 38 homologous families based on their sequence similarity. For each family, multiple sequence alignments and profile hidden Markov models are provided, and functionally relevant residues are annotated.ConclusionThe DED is a valuable tool which can be applied to identify new PHA depolymerase sequences from complete genomes in silico, to classify PHA depolymerases, to predict their biochemical properties, and to design enzyme variants with improved properties.

Studies on the biodegradability of polythioester copolymers and homopolymers by polyhydroxyalkanoate (PHA)-degrading bacteria and PHA depolymerases.

The biodegradability of microbial polythioesters (PTEs), a novel class of biopolymers which were discovered recently and can be produced by polyhydroxyalkanoate (PHA)-accumulating bacteria, was studied. Using poly(3-hydroxybutyrate- co-3-mercaptopropionate) [poly(3HB- co-3MP)] as sole carbon source for screening, 22 new bacterial strains were isolated and characterized. Interestingly, none of the PHA-degrading bacteria was able to utilize the homopolymer poly(3MP) as a carbon source for growth or to form clear zones on poly(3MP)-containing agar plates. The extracellular PHA depolymerases from two strains ( Schlegelella thermodepolymerans, Pseudomonas indica K2) were purified to electrophoretic homogeneity and biochemically characterized. The PHA depolymerase of S. thermodepolymerans exhibited a temperate optimum of about 75 degrees C to 80 degrees C and was stable at 70 degrees C for more than 24 h. Regarding the substrate specificities of the PHA depolymerase of S. thermodepolymerans, enzyme activities decreased significantly with increasing 3MP content of the copolymer substrates. Interestingly, no activity could be detected with homoPTEs consisting only of 3MP or of 3-mercaptobutyrate. Similar results were obtained with the PHA depolymerases PhaZ2, PhaZ5 and PhaZ7 of Paucimonas lemoignei which were also investigated. The PHA depolymerase of Ps. indica K2 did not cleave any of the investigated polymers containing 3MP. Gas chromatography, infrared and (1)H-NMR spectrometry and matrix-assisted laser desorption/ionization time-of-flight analysis revealed that 3MPs containing oligomers were enriched in the water-insoluble fraction remaining after partial digestion of poly(3HB- co-3MP) by purified poly(3HB) depolymerase of S. thermodepolymerans. In contrast, 3HB was enriched in the water-soluble fraction, which also contained 3HB- co-3MP dimer obtained by partial digestion of this copolymer by the enzyme. This study clearly indicates that PHA depolymerases are specific for oxoester linkages of PHAs and that the thioester bonds of PTEs cannot be cleaved by this type of enzyme.

Poly(3-hydroxyvalerate) depolymerase of Pseudomonas lemoignei.

Pseudomonas lemoignei is equipped with at least five polyhydroxyalkanoate (PHA) depolymerase structural genes (phaZ1 to phaZ5) which enable the bacterium to utilize extracellular poly(3-hydroxybutyrate) (PHB), poly(3-hydroxyvalerate) (PHV), and related polyesters consisting of short-chain-length hxdroxyalkanoates (PHA(SCL)) as the sole sources of carbon and energy. Four genes (phaZ1, phaZ2, phaZ3, and phaZ5) encode PHB depolymerases C, B, D, and A, respectively. It was speculated that the remaining gene, phaZ4, encodes the PHV depolymerase (D. Jendrossek, A. Frisse, A. Behrends, M. Andermann, H. D. Kratzin, T. Stanislawski, and H. G. Schlegel, J. Bacteriol. 177:596-607, 1995). However, in this study, we show that phaZ4 codes for another PHB depolymeraes (i) by disagreement of 5 out of 41 amino acids that had been determined by Edman degradation of the PHV depolymerase and of four endoproteinase GluC-generated internal peptides with the DNA-deduced sequence of phaZ4, (ii) by the lack of immunological reaction of purified recombinant PhaZ4 with PHV depolymerase-specific antibodies, and (iii) by the low activity of the PhaZ4 depolymerase with PHV as a substrate. The true PHV depolymerase-encoding structural gene, phaZ6, was identified by screening a genomic library of P. lemoignei in Escherichia coli for clearing zone formation on PHV agar. The DNA sequence of phaZ6 contained all 41 amino acids of the GluC-generated peptide fragments of the PHV depolymerase. PhaZ6 was expressed and purified from recombinant E. coli and showed immunological identity to the wild-type PHV depolymerase and had high specific activities with PHB and PHV as substrates. To our knowledge, this is the first report on a PHA(SCL) depolymerase gene that is expressed during growth on PHV or odd-numbered carbon sources and that encodes a protein with high PHV depolymerase activity. Amino acid analysis revealed that PhaZ6 (relative molecular mass [M(r)], 43,610 Da) resembles precursors of other extracellular PHA(SCL) depolymerases (28 to 50% identical amino acids). The mature protein (M(r), 41,048) is composed of (i) a large catalytic domain including a catalytic triad of S(136), D(211), and H(269) similar to serine hydrolases; (ii) a linker region highly enriched in threonine residues and other amino acids with hydroxylated or small side chains (Thr-rich region); and (iii) a C-terminal domain similar in sequence to the substrate-binding domain of PHA(SCL) depolymerases. Differences in the codon usage of phaZ6 for some codons from the average codon usage of P. lemoignei indicated that phaZ6 might be derived from other organisms by gene transfer. Multialignment of separate domains of bacterial PHA(SCL) depolymerases suggested that not only complete depolymerase genes but also individual domains might have been exchanged between bacteria during evolution of PHA(SCL) depolymerases.