Composition Of Extracellular Matrices Research Articles

Longevity interventions modulate mechanotransduction and extracellular matrix homeostasis in C. elegans

Dysfunctional extracellular matrices (ECM) contribute to aging and disease. Repairing dysfunctional ECM could potentially prevent age-related pathologies. Interventions promoting longevity also impact ECM gene expression. However, the role of ECM composition changes in healthy aging remains unclear. Here we perform proteomics and in-vivo monitoring to systematically investigate ECM composition (matreotype) during aging in C. elegans revealing three distinct collagen dynamics. Longevity interventions slow age-related collagen stiffening and prolong the expression of collagens that are turned over. These prolonged collagen dynamics are mediated by a mechanical feedback loop of hemidesmosome-containing structures that span from the exoskeletal ECM through the hypodermis, basement membrane ECM, to the muscles, coupling mechanical forces to adjust ECM gene expression and longevity via the transcriptional co-activator YAP-1 across tissues. Our results provide in-vivo evidence that coordinated ECM remodeling through mechanotransduction is required and sufficient to promote longevity, offering potential avenues for interventions targeting ECM dynamics.

Extracellular matrix substrates differentially influence enteric glial cell homeostasis and immune reactivity.

Enteric glial cells are important players in the control of motility, intestinal barrier integrity and inflammation. During inflammation, they switch into a reactive phenotype enabling them to release inflammatory mediators, thereby shaping the inflammatory environment. While a plethora of well-established in vivo models exist, cell culture models necessary to decipher the mechanistic pathways of enteric glial reactivity are less well standardized. In particular, the composition of extracellular matrices (ECM) can massively affect the experimental outcome. Considering the growing number of studies involving primary enteric glial cells, a better understanding of their homeostatic and inflammatory in vitro culture conditions is needed. We examined the impact of different ECMs on enteric glial culture purity, network morphology and immune responsiveness. Therefore, we used immunofluorescence and brightfield microscopy, as well as 3' bulk mRNA sequencing. Additionally, we compared cultured cells with in vivo enteric glial transcriptomes isolated from Sox10iCreERT2Rpl22HA/+ mice. We identified Matrigel and laminin as superior over other coatings, including poly-L-ornithine, different lysines, collagens, and fibronectin, gaining the highest enteric glial purity and most extended glial networks expressing connexin-43 hemichannels allowing intercellular communication. Transcriptional analysis revealed strong similarities between enteric glia on Matrigel and laminin with enrichment of gene sets supporting neuronal differentiation, while cells on poly-L-ornithine showed enrichment related to cell proliferation. Comparing cultured and in vivo enteric glial transcriptomes revealed a 50% overlap independent of the used coating substrates. Inflammatory activation of enteric glia by IL-1β treatment showed distinct coating-dependent gene expression signatures, with an enrichment of genes related to myeloid and epithelial cell differentiation on Matrigel and laminin coatings, while poly-L-ornithine induced more gene sets related to lymphocyte differentiation. Together, changes in morphology, differentiation and immune activation of primary enteric glial cells proved a strong effect of the ECM. We identified Matrigel and laminin as pre-eminent substrates for murine enteric glial cultures. These new insights will help to standardize and improve enteric glial culture quality and reproducibility between in vitro studies in the future, allowing a better comparison of their functional role in enteric neuroinflammation.

Extracellular matrix biomechanical roles and adaptation in health and disease.

Extracellular matrices (ECMs) are dynamic 3D macromolecular networks that exhibit structural characteristics and composition specific to different tissues, serving various biomechanical and regulatory functions. The interactions between ECM macromolecules such as collagen, elastin, glycosaminoglycans (GAGs), proteoglycans (PGs), fibronectin, and laminin, along with matrix effectors and water, contribute to the unique cellular and tissue functional properties during organ development, tissue homoeostasis, remodeling, disease development, and progression. Cells adapt to environmental changes by adjusting the composition and array of ECM components. ECMs, forming the 3D bioscaffolds of our body, provide mechanical support for tissues and organs and respond to the environmental variables influencing growth and final adult body shape in mammals. Different cell types displaydistinct adaptations to the respective ECM environments. ECMs regulate biological processes by controlling the diffusion of infections and inflammations, sensing and adapting to external stimuli and gravity from the surrounding habitat, and, in the context of cancer, interplaying with and regulating cancer cell invasion and drug resistance. Alterations in the ECM composition in pathological conditions drive adaptive responses of cells and could therefore result in abnormal cell behavior and tissue dysfunction. Understanding the biomechanical functionality, adaptation, and roles of distinct ECMs is essential for research on various pathologies, including cancer progression and multidrug resistance, which is of crucial importance for developing targeted therapies. In this Viewpoint article, we critically present and discuss specific biomechanical functions of ECMs and regulatory adaptation mechanisms in both health and disease, with a particular focus on cancer progression.

Functional acellular matrix for tissue repair.

In view of their low immunogenicity, biomimetic internal environment, tissue- and organ-like physicochemical properties, and functionalization potential, decellularized extracellular matrix (dECM) materials attract considerable attention and are widely used in tissue engineering. This review describes the composition of extracellular matrices and their role in stem-cell differentiation, discusses the advantages and disadvantages of existing decellularization techniques, and presents methods for the functionalization and characterization of decellularized scaffolds. In addition, we discuss progress in the use of dECMs for cartilage, skin, nerve, and muscle repair and the transplantation or regeneration of different whole organs (e.g., kidneys, liver, uterus, lungs, and heart), summarize the shortcomings of using dECMs for tissue and organ repair after refunctionalization, and examine the corresponding future prospects. Thus, the present review helps to further systematize the application of functionalized dECMs in tissue/organ transplantation and keep researchers up to date on recent progress in dECM usage.

Formulation of Dermal Tissue Matrix Bioink by a Facile Decellularization Method and Process Optimization for 3D Bioprinting toward Translation Research.

Decellularized extracellular matrices (ECMs) are being extensively used for tissue engineering purposes and detergents are predominantly used for this. A facile detergent-free decellularization method is developed for dermal matrix and compared it with the most used detergent-based decellularization methods. An optimized, single-step, cost-effective Hypotonic/Hypertonic (H/H) Sodium Chloride (NaCl) solutions-based method is employed to decellularize goat skin that resulted in much higher yield than other methods. The ECM composition, mechanical property, and cytocompatibility are evaluated and compared with other decellularization methods. Furthermore, this H/H-treated decellularized dermal ECM (ddECM) exhibits a residual DNA content of <50ngmg-1 of dry tissue. Moreover, 85.64±3.01% of glycosaminoglycans and 65.53±2.9% collagen are retained compared to the native tissue, which is higher than the ddECMs prepared by other methods. The cellular response is superior in ddECM (H/H) than other ddECMs prepared by detergent-based methods. Additionally, a bioink is formulated with the ddECM (H/H), showing good shear thinning and shear recovery properties. Process optimization in terms of print speed, flow rate, and viscosity is done to obtain a bioprinting window for ddECM bioink. The printed constructs with optimized parameters have adequate mechanical and cell adhesive properties and excellent isotropic cellular alignment.

Radiosensitivity of Breast Cancer Cells Is Dependent on the Organ Microenvironment.

BackgroundDistant metastasis is the leading risk factor of death in breast cancer patients, with lung and liver being commonly involved sites of distant seeding. Ongoing clinical trials are studying the benefit from additional local treatment to these metastatic sites with radiation therapy. However, little is known about the tissue-specific microenvironment and the modulating response to treatments due to limitations of traditional in vitro systems. By using biomatrix scaffolds (BMSs) to recreate the complex composition of extracellular matrices in normal organs, we chose to study the radiotherapy response with engineered breast cancer “metastases” in liver and lung organ-specific tissues.MethodsLiver and lung BMSs were prepared for tissue culture. Human breast cancer cell lines were passaged on normal tissue culture plates or tissue culture plates coated with Matrigel, liver BMSs, and lung BMSs. Clonogenic assays were performed to measure cell survival with varying doses of radiation. Reactive Oxygen Species (ROS) detection assay was used to measure ROS levels after 6 Gy irradiation to cancer cells.ResultsThe response of breast cell lines to varying doses of radiotherapy is affected by their in vitro acellular microenvironment. Breast cancer cells grown in liver BMSs were more radiosensitive than when grown in lung BMSs. ROS levels for breast cancer cells cultured in lung and liver BMSs were higher than that in plastic or in Matrigel plate cells, before and after radiotherapy, highlighting the interaction with surrounding tissue-specific growth factors and cytokines. ROSs in both lung and liver BMSs were significantly increased after radiotherapy delivery, suggesting these sites create prime environments for radiation-induced cell death.ConclusionsThe therapeutic response of breast cancer metastases is dependent on the organ-specific microenvironment. The interaction between tissue microenvironment in these organs may identify sensitivity of therapeutic drug targets and radiation delivery for future studies.

Renal Regeneration: The Role of Extracellular Matrix and Current ECM-Based Tissue Engineered Strategies.

Natural extracellular matrices (ECM) are currently being studied as an alternative source for organ transplantation or as new solutions to treat kidney injuries, which can evolve to end-stage renal disease, a life devastating condition. This paper provides an overview on the current knowledge in kidney ECM and its usefulness on future investigations. The composition and structure of kidney ECM is herein associated with its intrinsic capacity of remodeling and repair after insult. Moreover, it provides a deeper insight on altered ECM components during disease. The use of decellularized kidney matrices is discussed in the second part of the review, with emphasis on how these matrices contribute to tissue-specific differentiation of embryonic, pluripotent, and other stem cells. The evolution on the field toward different uses of xenogeneic ECM as a biological scaffold material is discussed, namely the major outcomes on whole kidney recellularization and its in vivo implantation. At last, the recent literature on the use of processed kidney decellularized ECM to produce diverse biomaterial substrates, such as hydrogels, membranes, and bioinks are reviewed, with emphasis on future perspectives of its translation into the clinic.

Mechanotransduction Coordinates Inter-Tissue Extracellular Matrix Protein Homeostasis Promoting Longevity in &lt;i&gt;C. Elegans&lt;/i&gt;

Although it is postulated that dysfunctional extracellular matrices (ECM) drive aging and disease, how ECM integrity assures health during aging is unknown. Here, we systematically examined the ECM composition during Caenorhabditis elegans aging revealing three distinct collagen dynamics. We show that age-dependent stiffening of inert collagen was slowed by longevity interventions through replenishing turned-over collagens. In a screen for the regulators that drive this prolonged collagen remodeling, we identify an apparatus that spans from the exoskeletal ECM through the hypodermis, basement membrane ECM, to the muscles, coupling mechanical forces to adjust ECM gene expression across tissues. Heparan sulfate proteoglycan perlecan is the weakest link in this tension-induced communication, uncoupling basement membrane collagen from its integrin receptor during aging. This novel mechanism of mechano-coupling and synchronizing of two functionally distinct and distant ECMs is indispensable for longevity. Thus, besides hormonal or other signaling molecules, mechanotransduction-coordinated ECM remodeling systemically promotes healthy aging.

Biomimetic Membranes of Methacrylated Gelatin/Nanohydroxyapatite/Poly(l-Lactic Acid) for Enhanced Bone Regeneration.

Nanofibrous poly(l-lactic acid) (PLLA) membrane-simulated extracellular matrices (ECMs) can be used in the biomedical field. However, the hydrophobic nature and poor osteoinductive property of PLLA limit its application in guided bone regeneration (GBR). In this work, a methacrylated gelatin/nano-HA (GelMA/nHA) complex was first synthesized in situ and then introduced into PLLA to fabricate biomimetic GelMA/nHA/PLLA membranes, mimicking the nanofibrous architecture and composition of ECMs by electrospinning and photocrosslinking. Compared to PLLA and GelMA/PLLA membranes, the novel GelMA/nHA/PLLA membranes demonstrated better tensile, hydrophilic, water sorption, and degradation properties. An in vitro biological evaluation indicated that the membranes promoted human bone marrow-derived mesenchymal stem cell (hBMSC) proliferation, adhesion, and osteogenic differentiation. Critical-sized defects in rat models were used to evaluate the bone regeneration performances of the three kinds of membranes in vivo, and the GelMA/nHA/PLLA membranes demonstrated excellent osteogenic regeneration potential. Therefore, GelMA/nHA/PLLA membranes have wide application prospects in bioengineering applications such as GBR treatment.

Evaluation of Fibrin-Agarose Tissue-Like Hydrogels Biocompatibility for Tissue Engineering Applications.

Generation of biocompatible and biomimetic tissue-like biomaterials is crucial to ensure the success of engineered substitutes in tissue repair. Natural biomaterials able to mimic the structure and composition of native extracellular matrices typically show better results than synthetic biomaterials. The aim of this study was to perform an in vivo time-course biocompatibility analysis of fibrin-agarose tissue-like hydrogels at the histological, imagenological, hematological, and biochemical levels. Tissue-like hydrogels were produced by a controlled biofabrication process allowing the generation of biomechanically and structurally stable hydrogels. The hydrogels were implanted subcutaneously in 25 male Wistar rats and evaluated after 1, 5, 9, and 12 weeks of in vivo follow-up. At each period of time, animals were analyzed using magnetic resonance imaging (MRI), hematological analyses, and histology of the local area in which the biomaterials were implanted, along with major vital organs (liver, kidney, spleen, and regional lymph nodes). MRI results showed no local or distal alterations during the whole study period. Hematology and biochemistry showed some fluctuation in blood cells values and in some biochemical markers over the time. However, these parameters were progressively normalized in the framework of the homeostasis process. Histological, histochemical, and ultrastructural analyses showed that implantation of fibrin-agarose scaffolds was followed by a progressive process of cell invasion, synthesis of components of the extracellular matrix (mainly, collagen) and neovascularization. Implanted biomaterials were successfully biodegraded and biointegrated at 12 weeks without any associated histopathological alteration in the implanted zone or distal vital organs. In summary, our in vivo study suggests that fibrin-agarose tissue-like hydrogels could have potential clinical usefulness in engineering applications in terms of biosafety and biocompatibility.

Synergistic Effect of Cell-Derived Extracellular Matrices and Topography on Osteogenesis of Mesenchymal Stem Cells.

Cell-derived matrices (CDMs) are an interesting alternative to conventional sources of extracellular matrices (ECMs) as CDMs mimic the natural ECM composition better and are therefore attractive as a scaffolding material for regulating the functions of stem cells. Previous research on stem cell differentiation has demonstrated that both surface topography and CDMs have a significant influence. However, not much focus has been devoted to elucidating possible synergistic effects of CDMs and topography on osteogenic differentiation of human bone marrow-derived mesenchymal stem cells (hBM-MSCs). In this study, polydimethylsiloxane (PDMS)-based anisotropic topographies (wrinkles) with various topography dimensions were prepared and subsequently combined with native ECMs produced by human fibroblasts that remained on the surface topography after decellularization. The synergistic effect of CDMs combined with topography on osteogenic differentiation of hBM-MSCs was investigated. The results showed that substrates with specific topography dimensions, coated with aligned CDMs, dramatically enhanced the capacity of osteogenesis as investigated using immunofluorescence staining for identifying osteopontin (OPN) and mineralization. Furthermore, the hBM-MSCs on the substrates decorated with CDMs exhibited a higher percentage of (Yes-associated protein) YAP inside the nucleus, stronger cell contractility, and greater formation of focal adhesions, illustrating that enhanced osteogenesis is partly mediated by cellular tension and mechanotransduction following the YAP pathway. Taken together, our findings highlight the importance of ECMs mediating the osteogenic differentiation of stem cells, and the combination of CDMs and topography will be a powerful approach for material-driven osteogenesis.

Microfluidic-Nanofiber Hybrid Array for Screening of Cellular Microenvironments.

Cellular microenvironments are generally sophisticated, but crucial for regulating the functions of human pluripotent stem cells (hPSCs). Despite tremendous effort in this field, the correlation between the environmental factors-especially the extracellular matrix and soluble cell factors-and the desired cellular functions remains largely unknown because of the lack of appropriate tools to recapitulate in vivo conditions and/or simultaneously evaluate the interplay of different environment factors. Here, a combinatorial platform is developed with integrated microfluidic channels and nanofibers, associated with a method of high-content single-cell analysis, to study the effects of environmental factors on stem cell phenotype. Particular attention is paid to the dependence of hPSC short-term self-renewal on the density and composition of extracellular matrices and initial cell seeding densities. Thus, this combinatorial approach provides insights into the underlying chemical and physical mechanisms that govern stem cell fate decisions.

Engineered Extracellular Matrices as Biomaterials of Tunable Composition and Function

Engineered and decellularized extracellular matrices (ECM) are receiving increasing interest in regenerative medicine as materials capable to induce cell growth/differentiation and tissue repair by physiological presentation of embedded cues. However, ECM production/decellularization processes and control over their composition remain primary challenges. This study reports engineering of ECM materials with customized properties, based on genetic manipulation of immortalized and death‐inducible human mesenchymal stromal cells (hMSC), cultured within 3D porous scaffolds under perfusion flow. The strategy allows for robust ECM deposition and subsequent decellularization by deliberate cell‐apoptosis induction. As compared to standard production and freeze/thaw treatment, this grants superior preservation of ECM, leading to enhanced bone formation upon implantation in calvarial defects. Tunability of ECM composition and function is exemplified by modification of the cell line to overexpress vascular endothelial growth factor alpha (VEGF), which results in selective ECM enrichment and superior vasculature recruitment in an ectopic implantation model. hMSC lines culture under perfusion‐flow is pivotal to achieve uniform scaffold decoration with ECM and to streamline the different engineering/decellularization phases in a single environmental chamber. The findings outline the paradigm of combining suitable cell lines and bioreactor systems for generating ECM‐based off‐the‐shelf materials, with custom set of signals designed to activate endogenous regenerative processes.

Natural Extracellular Matrix for Cellular and Tissue Biomanufacturing.

Natural extracellular matrices (ECM) derived from native tissues or cultured cells are extensively employed to fabricate biocompatible scaffolds or living tissue constructs for the application in cellular and tissue engineering. The composition and structure of ECM are not only heterogeneous, but also tissue or cell specific. Recapitulating the unique cell or tissue niche, ECM-based products are promising to quickly integrate with host tissues and accelerate restoration of tissue function. A variety of natural ECM-based scaffolds and tissue constructs have been biomanufactured using different approaches. Native tissue derived ECM is typically grounded into powders that can be further processed into hybrid composites in the form of hydrogels, foams, nanofibers, and 3D-printed complex constructs. Cell-derived ECM follows different biomanufacturing methods. Usually, cells are seeded on a scaffold to deposit ECM resulting in ECM-ornamented materials. The employment of resolvable scaffolds and cell sheet engineering technique enables production of complex 3D constructs exclusively composed of ECM with/without cells. In order to enhance mechanical strength, in vivo stability, and biological performance of ECM-based products, cross-linking reagents or bioactive factors are often used for modification. The major focus of this article is to provide an overview of current biomanufacturing approaches that utilize either native tissue or cell-derived natural ECM in the field of cellular and tissue engineering. Furthermore, the existing challenges for translational application of ECM-based products and the potential resolutions are discussed.

The Challenge in Using Mesenchymal Stromal Cells for Recellularization of Decellularized Cartilage.

Some decellularized musculoskeletal extracellular matrices (ECM)s derived from tissues such as bone, tendon and fibrocartilaginous meniscus have already been clinical use for tissue reconstruction. Repair of articular cartilage with its unique zonal ECM architecture and composition is still an unsolved problem, and the question is whether allogenic or xenogeneic decellularized cartilage ECM could serve as a biomimetic scaffold for this purpose.Hence, this survey outlines the present state of preparing decellularized cartilage ECM-derived scaffolds or composites for reconstruction of different cartilage types and of reseeding it particularly with mesenchymal stromal cells (MSCs).The preparation of natural decellularized cartilage ECM scaffolds hampers from the high density of the cartilage ECM and lacking interconnectivity of the rather small natural pores within it: the chondrocytes lacunae. Nevertheless, the reseeding of decellularized ECM scaffolds before implantation provided superior results compared with simply implanting cell-free constructs in several other tissues, but cartilage recellularization remains still challenging. Induced by cartilage ECM-derived scaffolds MSCs underwent chondrogenesis.Major problems to be addressed for the application of cell-free cartilage were discussed such as to maintain ECM structure, natural chemistry, biomechanics and to achieve a homogenous and stable cell recolonization, promote chondrogenic and prevent terminal differentiation (hypertrophy) and induce the deposition of a novel functional ECM. Some promising approaches were proposed including further processing of the decellularized ECM before recellularization of the ECM with MSCs, co-culturing of MSCs with chondrocytes and establishing bioreactor culture e.g. with mechanostimulation, flow perfusion pressure and lowered oxygen tension. Graphical Abstract Synopsis of tissue engineering approaches based on cartilage-derived ECM.

Engineered Basement Membranes for Regenerating the Corneal Endothelium.

Basement membranes are protein-rich extracellular matrices (ECM) that are essential for epithelial and endothelial tissue structure and function. Aging and disease cause changes in the physical properties and ECM composition of basement membranes, which has spurred research to develop methods to repair and/or regenerate these tissues. An area of critical clinical need is the cornea, where failure of the endothelium leads to stromal edema and vision loss. Here, an engineered basement membrane (EBM) is developed that consists of a dense layer of collagen IV and/or laminin ≈5-10 nm thick, created using surface-initiated assembly, conformally attached to a collagen I film. These EBMs are used to engineer a corneal endothelium (CE) that mimics the structure of Descemet's membrane with a thin stromal layer, toward use as a graft for lamellar keratoplasty. Results show that bovine and human CE cells form confluent monolayers on the EBM, express ZO-1 at the cell-cell borders, and achieve a density of ≈1600 cells mm-2 for 28 and 14 d, respectively. These results demonstrate that the technique is capable of fabricating EBMs with structural and compositional properties that mimic native basement membranes and that EBM may be a suitable carrier for engineering transplant quality CE grafts.

Extracellular matrix gene expression profiling using microfluidics for colorectal carcinoma stratification.

In cancer, biomarkers have many potential applications including generation of a differential diagnosis, prediction of response to treatment, and monitoring disease progression. Many molecular biomarkers have been put forward for different diseases but most of them do not possess the required specificity and sensitivity. A biomarker with a high sensitivity has a low specificity and vice versa. The inaccuracy of the biomarkers currently in use has led to a compelling need to identify more accurate markers with diagnostic and prognostic significance. The aim of the present study was to use a novel, droplet-based, microfluidic platform to evaluate the prognostic value of a panel of thirty-four genes that regulate the composition of extracellular matrices in colorectal carcinoma. Our method is a novel approach as it uses using continuous-flowing Polymerase Chain Reaction for the sensitive detection and accurate quantitation of gene expression. We identified a panel of relevant extracellular matrix genes whose expression levels were measured by real-time quantitative polymerase chain reaction using Taqman® reagents in twenty-four pairs of matched colorectal cancer tumour and associated normal tissue. Differential expression patterns occurred between the normal and malignant tissue and correlated with histopathological parameters and overall surgical staging. The findings demonstrate that a droplet-based microfluidic quantitative PCR system enables biomarker classification. It was further possible to sub-classify colorectal cancer based on extracellular matrix protein expressing groups which in turn correlated with prognosis.

Blood-brain barrier properties in vitro depend on composition and assembly of endogenous extracellular matrices.

Brain capillary endothelial cells, which constitute the blood-brain barrier (BBB), are enveloped by the extracellular matrix (ECM) produced by endothelial cells, pericytes and astrocytes. The contribution of matrix components secreted by the various cell types at the neurovascular unit, however, remains unclear with respect to their effect on endothelial barrier function. In this study, a new in vitro model was established by growing endothelial cells on an ECM produced by pericytes, astrocytes or a serial combination of both. The last-mentioned was found to be more in vivo-like. We investigated the role of the composition and morphology of ECM supra-structures in maintaining BBB function. The composition was analysed by protein analysis (enzyme-linked immunosorbent assay) and the ultrastructure of generated matrices was analysed by transmission electron microscopy including immunogold labelling. We could show by electric cell-substrate impedance sensing measurements that pericytes and combined matrices significantly improved the barrier tightness of porcine brain capillary endothelial cells (PBCEC). The increase of the resistance was verified by enhanced expression of tight junction proteins. Thus, for the first time, we have shown that barrier integrity is strictly controlled by the ECM, which is a product of all cells involved in the secretion of ECM components and their modification by corresponding cells. Moreover, we have demonstrated that complex matrices by the various cells of the BBB induce barrier marker enzymes in PBCEC, such as alkaline phosphatase.

Driving iPSC-derived progenitor fate using in vitro synthetized kidney extracellular matrices assembled under macromolecular crowding

Event Abstract Back to Event Driving iPSC-derived progenitor fate using in vitro synthetized kidney extracellular matrices assembled under macromolecular crowding Valentina Magno1, Bella Roßbach2, Krithika Hariharan2, Jens Friedrichs1, Andreas Kurtz2 and Carsten Werner1, 3 1 Leibniz Institute of Polymer Research Dresden, Max Bergmann Center of Biomaterials, Germany 2 Charité – Universitätsmedizin Berlin, Berlin-Brandenburg Center for Regenerative Therapies, Germany 3 Center for Regenerative Therapies Dresden, Technische Universität Dresden, Germany Introduction: Cell-derived extracellular matrices (ECMs) have shown in the latest years to have broad application in the field of tissue engineering and regenerative medicine. The recent introduction of macromolecular crowding (MMC) for the modulation of in vitro ECM production allowed, furthermore, to better mimic physiological microenvironments[1]. In this work, we aim to explore the effect of MMC on the secretion of ECM by primary mouse mesangial cells and to study the impact of decellularized ECMs produced under standard and MMC conditions on the growth and differentiation of human induced pluripotent stem cell (iPSC)-derived intermediate mesoderm (IM) progenitors[2]. Methods: Covalently attached mesangial cell-derived ECMs were produced on a maleic anhydride co-polymer platform[3]. The ECM secretion was carried out for 8 days either under standard (Std) or MMC culture conditions by supplementing the medium with the synthetic polysaccharide Ficoll. During the ECM deposition phase, cell viability was assessed using a PrestoBlue assay. Cell layers were decellularised using an hypotonic solution and DNA remnants were removed by DNase treatment. The impact of MMC on ECM composition and morphology was investigated by colorimetric assays, immunohistochemistry, atomic force microscopy and scanning electron microscopy. IM progenitors were seeded in parallel on the mesangial cell-derived ECMs as well as on Geltrex and collagen IV as control substrates, with or without the supplementation of the ROCK inhibitor Y-27632. Adhesion and proliferation of IM progenitors were analyzed respectively using a Crystal Violet and a PrestoBlue assay. Furthermore, the expression of relevant kidney markers was examined via real time PCR. Results and Discussion: PrestoBlue assay showed that MMC did not affect the viability of the mesangial cells during ECM deposition. MMC was found to influence the composition, the mechanical properties and the supramolecular assembly of the mesangial cell-derived ECM. IM progenitors showed significantly higher cell viability and adhesion on both types of ECM (Std and MMC) compared to Geltrex and collagen IV. Particularly, in presence of the ROCK inhibitor, a significantly higher adhesion was found on MMC-ECM compared to both Std-ECM and control substrates. Higher proliferation rates were observed on both types of ECM vs. the controls, with the MMC-ECM outperforming Std-ECM. A significant increase in the expression of some mesangial markers and other glomerular markers was found for IM progenitors cultivated on MMC-ECM vs. Std-ECM, with even less mesangial-like characteristics found on the control substrates. Conclusion: Our results indicate that matrix based signals support the differentiation of the IM progenitors toward the mesangial lineage without the addition of soluble cues. In the future, the combination of cell-derived ECM and MMC may be utilized to study kidney progenitor differentiation and to develop bioengineered kidney tissues. A systematic study on different crowder categories and concentrations may also allow to control progenitor differentiation to obtain a reliable cell source for regenerative approaches. This work was supported by EU Marie Curie NephroTools FP7 Initial Training Network (ITN)

Neural crest cell-autonomous roles of fibronectin in cardiovascular development

The chemical and mechanical properties of extracellular matrices (ECMs) modulate diverse aspects of cellular fates; however, how regional heterogeneity in ECM composition regulates developmental programs is not well understood. We discovered that fibronectin 1 (Fn1) is expressed in strikingly non-uniform patterns during mouse development, suggesting that regionalized synthesis of the ECM plays cell-specific regulatory roles during embryogenesis. To test this hypothesis, we ablated Fn1 in the neural crest (NC), a population of multi-potent progenitors expressing high levels of Fn1. We found that Fn1 synthesized by the NC mediated morphogenesis of the aortic arch artery and differentiation of NC cells into vascular smooth muscle cells (VSMCs) by regulating Notch signaling. We show that NC Fn1 signals in an NC cell-autonomous manner through integrin α5β1 expressed by the NC, leading to activation of Notch and differentiation of VSMCs. Our data demonstrate an essential role of the localized synthesis of Fn1 in cardiovascular development and spatial regulation of Notch signaling.