Electroluminescence Quantum Efficiency Research Articles

Quantum barriers engineering toward radiative and stable perovskite photovoltaic devices

Efficient photovoltaic devices must be efficient light emitters to reach the thermodynamic efficiency limit. Here, we present a promising prospect of perovskite photovoltaics as bright emitters by harnessing the significant benefits of photon recycling, which can be practically achieved by suppressing interfacial quenching. We have achieved radiative and stable perovskite photovoltaic devices by the design of a multiple quantum well structure with long (∼3 nm) organic spacers with oleylammonium molecules at perovskite top interfaces. Our L-site exchange process (L: barrier molecule cation) enables the formation of stable interfacial structures with moderate conductivity despite the thick barriers. Compared to popular short (∼1 nm) Ls, our approach results in enhanced radiation efficiency through the recursive process of photon recycling. This leads to the realization of radiative perovskite photovoltaics with both high photovoltaic efficiency (in-lab 26.0%, certified to 25.2%) and electroluminescence quantum efficiency (19.7 % at peak, 17.8% at 1-sun equivalent condition). Furthermore, the stable crystallinity of oleylammonium-based quantum wells enables our devices to maintain high efficiencies for over 1000 h of operation and >2 years of storage.

Multi‐Selenophene Strategy Enables Dimeric Acceptors‐Based Organic Solar Cells with over 18.5% Efficiency

AbstractDimeric acceptor (DMA) becomes a promising alternative to small‐molecular and polymeric acceptor‐based organic solar cells (OSCs) due to its well‐defined chemical structure, high batch‐to‐batch reproducibility, and low molecular diffusion properties. However, DMAs usually exhibit blueshifted absorptions, limiting their photon utilization abilities. Herein, multi‐selenophene strategies are adopted to develop redshifted DMAs. From monomer (YSe) to dimers (DYSe‐1 and DYSe‐2), reduced electron reorganization energies and exciton binding energies enable the efficient charge dynamics in the DMAs‐based OSCs. Together with their effective absorption extending to ≈920 nm, DYSe‐1‐ and DYSe‐2‐ based OSCs exhibit outstanding short‐circuit current densities (JSCs) over 27 mA cm−2, which are the best among DMAs. Besides, compared with the YSe‐based device, both DMA‐based devices have higher electroluminescence quantum efficiencies and thus reduce nonradiative recombination loss (ΔE3), contributing to their reduced energy losses. The resultant open‐circuit voltages (VOCs) of DYSe‐1‐ and DYSe‐2‐ based OSCs are ≈0.88 V, which, combining their super JSC values, lead to the promising power conversion efficiencies of 18.56% and 18.22%, respectively. These results are among the best in DMAs‐based OSCs and highlight the great potential of the multi‐selenophene strategy for the development of redshifted DMAs with high performance.

Efficiency enhancement of organic light-emitting diodes with multifunctional magnetic composite nanoparticles of Fe3O4@Au@SiO2

Multifunctional nanomaterials have been widely utilized to optimize the performances of optoelectronic devices. In this work, magnetic composite nanoparticles (NPs) of Fe3O4@Au@SiO2 are used as dopants to improve the quantum efficiency of electroluminescence of the tris-(8-hydroxyquinoline) aluminum-based organic light emitting devices (OLEDs). As a result, the performances of doped OLED (Von = 2.8 V, L = 23,400 cd/m2, EQE = 1.55) are obviously boosted as compared to the control device (Von = 2.9 V, L = 19,780 cd/m2, EQE = 1.27). Especially, the current efficiency of fluorescent green OLEDs can be 22.5 % enhanced by simply mixing the magnetic Fe3O4@Au@SiO2 (0.5 wt‰) NPs into poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), yielding the maximum value of 4.62 cd/A. The efficiency enhancement could be attributed to the collective effects of light-scattering, localized surface plasmon resonance (LSPR) and magnetic effect induced by magnetic composite NPs.

Decreasing exciton dissociation rates for reduced voltage losses in organic solar cells

Enhancing the device electroluminescence quantum efficiency (EQEEL) is a critical factor in mitigating non-radiative voltage losses (VNR) and further improving the performance of organic solar cells (OSCs). While the common understanding attributes EQEEL in OSCs to the dynamics of charge transfer (CT) states, persistent efforts to manipulate these decay dynamics have yielded limited results, with the EQEEL of high-efficiency OSCs typically remaining below 10−2%. This value is considerably lower than that observed in high efficiency inorganic photovoltaic devices. Here, we report that EQEEL is also influenced by the dissociation rate constant of singlet states (kDS). Importantly, in contrast to the traditional belief that advocates maximizing kDS for superior photovoltaic quantum efficiency (EQEPV), a controlled reduction in kDS is shown to enhance EQEEL without compromising EQEPV. Consequently, a promising experimental approach to address the VNR challenge is proposed, resulting in a significant improvement in the performance of OSCs.

Monolayer WS2 electro- and photo-luminescence enhancement by TFSI treatment

Layered material heterostructures (LMHs) can be used to fabricate electroluminescent devices operating in the visible spectral region. A major advantage of LMH-based light emitting diodes (LEDs) is that electroluminescence (EL) emission can be tuned across that of different exciton complexes (e.g. biexcitons, trions, quintons) by controlling the charge density. However, these devices have an EL quantum efficiency as low as ∼10−4%. Here, we show that the superacid bis-(triuoromethane)sulfonimide (TFSI) treatment of monolayer WS2-LEDs boosts EL quantum efficiency by over one order of magnitude at room temperature. Non-treated devices emit light mainly from negatively charged excitons, while the emission in treated ones predominantly involves radiative recombination of neutral excitons. This paves the way to tunable and efficient LMH-based LEDs.

Extended theoretical modeling of reverse intersystem crossing for thermally activated delayed fluorescence materials.

Thermally activated delayed fluorescence (TADF) materials and multi-resonant (MR) variants are promising organic emitters that can achieve an internal electroluminescence quantum efficiency of ~100%. The reverse intersystem crossing (RISC) is key for harnessing triplet energies for fluorescence. Theoretical modeling is thus crucial to estimate its rate constant (kRISC) for material development. Here, we present a comprehensive assessment of the theory for simulating the RISC of MR-TADF molecules within a perturbative excited-state dynamics framework. Our extended rate formula reveals the importance of the concerted effects of nonadiabatic spin-vibronic coupling and vibrationally induced spin-orbital couplings in reliably determining kRISC of MR-TADF molecules. The excited singlet-triplet energy gap is another factor influencing kRISC. We present a scheme for gap estimation using experimental Arrhenius plots of kRISC. Erroneous behavior caused by approximations in Marcus theory is elucidated by testing 121 MR-TADF molecules. Our extended modeling offers in-depth descriptions of kRISC.

Evolution of interfacial defects and energy losses during aging of organic photovoltaics

As the power conversion efficiencies of Organic Solar Cells (OSCs) approach 20 %, the stability of the device becomes an increasingly urgent issue. To enhance device stability, it is crucial to identify potential loss mechanisms. In this study, we investigated the trap-state-dependent degradation mechanism of OSCs by directly comparing devices with different hole transport layers (HTLs) that introduce distinct interfacial defect distributions. Employing electrochemical impedance spectroscopy (EIS), Fourier transform photocurrent spectroscopy (FTPS), electroluminescence quantum efficiency (EQEEL), and temperature-dependent J-V techniques, we unraveled the relationship between device degradation and interfacial trap states and energy loss in PM6:Y6 devices. A lower density of interfacial deep traps is evidently correlated with smaller non-radiative recombination losses during the aging of devices based on PEDOT:PSS. Conversely, a higher density of deep traps in aged devices with WS2 interlayers and HTL-free configurations is presumed to be responsible for a significant increase in non-radiative recombination losses. The escalating deep-trap-state density in aged devices is observed to elevate carrier recombination, consequently deteriorating device performance. Beyond the scope of the energy balance theory, an additional factor, probably attributed to the change in the work function of ITO, was found to contribute significantly to energy loss in aged cells, particularly in HTL-free devices. These results highlight the potential for improving device stability via interface engineering.

Three-dimensional sensing of surfaces by projection of invisible electroluminescence from organic light-emitting diodes.

Organic light-emitting diodes (OLEDs) that efficiently emit near-infrared (NIR) light and consume little power will create valuable applications for OLEDs beyond just displays. Here, we report such a NIR-OLED with high operational stability that can be used as a light source for three-dimensional sensing of object's surfaces. Using a narrow-energy-gap material as a host for producing NIR hyperfluorescence system, we fabricated a NIR-OLED exhibiting intense emission at 930 nm with a high external electroluminescence quantum efficiency of more than 1% at a current density of 100 milliamperes per square meter without any degradation even after more than 300 hours of operation. The NIR-OLEDs were integrated with dense complementary metal-oxide semiconductor circuits to make a micro-NIR-OLED projector (0.21 inch, 230,400 pixels). By actively driving the projector on a pixel by pixel and projecting their emission onto objects, we successfully scanned and sensed the surfaces in three dimensions with invisible NIR.

Improving Electroluminescence of Two‐Coordinate Au(I) Complexes: Insights into Steric and Electronic Control

AbstractThis research elucidates the effects of structural modulations on electroluminescent Au(I) complexes, shedding light on factors governing radiative and nonradiative processes. A series of Au(I) complexes, fortified with ortho‐substituents in carbene and amido ligands, are subjected to rigorous structural, photophysical, and quantum chemical investigations, which unveil distinct structural and electronic effects exerted by the ligands. The investigations reveal that nonradiative processes are governed primarily by the energy‐gap law. Radiative processes are observed to have a weak correlation with the mutual interactions of the molecular orbitals of carbene and amido ligands. Rather, it is discovered that an accumulation of the negative charge in the Au 5d orbital in the excited state decelerates radiative processes. The effectiveness of these findings is substantiated through the larger external quantum efficiency of electroluminescence devices employing the Au(I) complex, in comparison to those based on the archetypical Au(I) complex and the organic thermally activated delayed fluorescent molecule. These compelling revelations underscore the untapped potential of Au(I) complexes in the advancement of electroluminescence technology and advocate for continued investigations into the intriguing domain of ligand structural control.

Asymmetric Ternary Spiro Phosphine Oxide Hosts for Yellow Thermally Activated Delayed Fluorescence Diodes with External Quantum Efficiency Beyond 30%

AbstractYellow thermally activated delayed fluorescence (TADF) organic light‐emitting diodes (OLEDs) are indispensable for lighting, navigation, caution, and so on; however, their development is far behind those of three‐elementary‐color and white analogs, partially because of the lack of host specificity. In this contribution, spiro[bithoxanthene] (ST) and spiro[thioxanthene‐xanthene] (STX) are used as spiro skeletons to form asymmetric ternary structures through introducing two electron‐donating tert‐butyl carbazole (tBCz) and one electron‐withdrawing diphenyl phosphine oxide (DPPO) groups on different rings. The resulting hosts named STSPOtBCz2 and STXSPOtBCz2 not only inherit the steric hindrance of their spiro skeletons, but also achieve the ambipolar characteristics. Their suitable triplet energy levels (T1) of ≈2.5 eV support efficient energy transfer to a conventional yellow TADF emitter 4CzTPNBu with the T1 of ≈2.2 eV. It is shown that compared to STSPOtBCz2 with a symmetric core, the accumulated asymmetry of the spiro skeleton and the kind, number, and position of substitution groups in STXSPOtBCz2 further suppresses the emission quenching, resulting in the state‐of‐the‐art photoluminescent and electroluminescent quantum efficiencies of 93% and 30.6%, respectively. The maximum power efficiency beyond 90 lm W−1 further demonstrates the great potential of multi‐asymmetric host systems for energy‐saving practical application.

The Potential Game‐Changer: A Concept‐to‐Proof Study on D:A Heterojunction‐Free Organic Photovoltaics†

Comprehensive SummarySince 1986, the donor‐acceptor (D:A) heterojunction has been regarded a necessity for high‐efficiency organic photovoltaics (OPVs), due to its unique advantage in compensating the intrinsic limitations of organic semiconductors, such as high exciton binding energy and poor ambipolar charge mobility. While this adversely causes tremendous non‐radiative charge recombination and instability issues, which currently become the most critical limits for commercialization of OPVs. Here, we present a concept‐to‐proof study on the potential of D:A heterojunction free OPV by taking advantage of recent progress of non‐fullerene acceptors. First, we demonstrate that the “free carriers” can be spontaneously generated upon illumination in an NFA, i.e., the 6TIC‐4F single layer. Second, the 6TIC‐4F layer also exhibits good ambipolar charge transporting property. These exceptional characteristics distinguish it from the traditional organic semiconductors, and relieve it from the reliance of D:A heterojunction to independently work as active layer. As a result, the subsequent OPV by simply sandwiching the 6TIC‐4F layer between the cathode and anode yields a considerably high power conversion efficiency ~1%. Moreover, we find the D:A heterojunction free device exhibits two order of magnitude higher electroluminescence quantum efficiency and significantly reduced VOC loss by 0.16 eV compared to those of the D:A BHJ structure, validating its promise for higher efficiency in the future. Therefore, our work demonstrates the possibility of using D:A heterojunction‐free device structure for high performance, that can potentially become the next game changer of OPV.

Phosphine-Oxide-Balanced Intra- and Interchain Through-Space Charge Transfer in Thermally Activated Delayed Fluorescence Polymers: Beyond 30% External Quantum Efficiency.

Through-space charge transfer (TSCT) is crucial for developing highly efficient thermally activated delayed fluorescence polymers. The balance of intra- and interchain TSCT can markedly improve performance, but it is still a big challenge. In this work, an effective strategy for "intra- and interchain TSCT balance" is demonstrated by way of a series of non-conjugated copolymers containing a 9,9-dimethylacridine donor and triazine-phosphine oxide (PO)-based acceptors. Steady-state and transient emission spectra indicate that compared to the corresponding blends, the copolymers can indeed achieve balanced intra- and interchain TSCT by accurately optimizing the inductive and steric effects of the acceptors. The DPOT acceptor with the strongest electron-withdrawing ability and the second bigger steric hindrance endows its copolymers with state-of-the-art photoluminescence and electroluminescence quantum efficiencies beyond 95% and 32%, respectively. This demonstrates that, compared to other congeners, the synergistic inductive and steric effects effectively enhance TSCT in DPOT-based copolymers for radiation, and suppress singlet and triplet quenching. The record-high efficiencies of its devices make this kind of copolymers hold the potential for low-cost, large-scale, and high-efficiency applications.

Understanding and Suppressing Non-Radiative Recombination Losses in Non-Fullerene Organic Solar Cells.

Organic solar cells benefit from non-fullerene acceptors (NFA) due to their high absorption coefficients, tunable frontier energy levels, and optical gaps, as well as their relatively high luminescence quantum efficiencies as compared to fullerenes. Those merits result in high yields of charge generation at a low or negligible energetic offset at the donor/NFA heterojunction, with efficiencies over 19% achieved for single-junction devices. Pushing this value significantly over 20% requires an increase in open-circuit voltage, which is currently still well below the thermodynamic limit. This can only be achieved by reducing non-radiative recombination, and hereby increasing the electroluminescence quantum efficiency of the photo-active layer. Here, current understanding of the origin of non-radiative decay, as well as an accurate quantification of the associated voltage losses are summarized. Promising strategies for suppressing these losses are highlighted, with focus on new material design, optimization of donor-acceptor combination, and blend morphology. This review aims at guiding researchers in their quest to find future solar harvesting donor-acceptor blends, which combine a high yield of exciton dissociation with a high yield of radiative free carrier recombination and low voltage losses, hereby closing the efficiency gap with inorganic and perovskite photovoltaics.

Interfacial Passivation Enormously Enhances Electroluminescence of Triphenylphosphine Cu4 I4 Cube.

Defect is one of the key factors limiting optoelectronic performances of organic-inorganic hybrid systems. Although high-efficiency bidentate ligands based electroluminescent (EL) clusters reported, until present, only few EL clusters based on monodentate ligands are realized since their structural instability induces more surface/interface defects. Herein, this bottleneck is first overcome in virtue of interfacial passivation by electron transporting layers (ETL). Through using TmPyPB with meta-linked pyridines as ETL, photoluminescent (PL) and EL quantum efficiencies of the simplest monophosphine Cu4 I4 cube [TPP]4 Cu4 I4 are greatly improved by ≈2 and 23 folds, respectively, as well as ≈200 folds increased luminance, corresponding to a huge leap from nearly unlighted (<20 nits) to highly bright (>3000 nits). The passivation effect of TmPyPB on surface defects of cluster layer is embodied as preventing interfacial charge trapping and suppressing exciton nonradiation.

A Feasible Strategy for a Highly Efficient Thermally Activated Delayed Fluorescence Emitter Over 900 nm Based on Phenalenone Derivatives.

Near-infrared (NIR) organic light-emitting diodes (OLEDs) suffer from the low external electroluminescence (EL) quantum efficiency (EQE), which is a critical obstacle for potential applications. Herein, 1-oxo-1-phenalene-2,3-dicarbonitrile (OPDC) is employed as an electron-withdrawing aromatic ring, and by incorporating with triphenylamine (TPA) and biphenylphenylamine (BBPA) donors, two novel NIR emitters with thermally activated delayed fluorescence (TADF) characteristics, namely OPDC-DTPA and OPDC-DBBPA, are first developed and compared in parallel. Intense NIR emission peaks at 962 and 1003 nm are observed in their pure films, respectively. Contributed by the local excited (LE) characteristics in the triplet (T1 ) state in synergy with the charge transfer (CT) characteristics for the singlet (S1 ) state to activate TADF emission, the solution processable doped NIR OLEDs based on OPDC-DTPA and OPDC-DBBPA yield EL peaks at 834 and 906 nm, accompanied with maximum EQEs of 0.457 and 0.103 %, respectively, representing the state-of-the-art EL performances in the TADF emitter-based NIR-OLEDs in the similar EL emission regions so far. This work manifests a simple and effective strategy for the development of NIR TADF emitters with long wavelength and efficiency synchronously.

Experimental Confirmation of the Optoelectronic Reciprocity Theorem in High-Efficiency CuIn1−xGaxSe2 Solar Cells

The optoelectronic reciprocity theorem has been proposed as a theorem relating electroluminescence (EL) and photovoltaic external quantum efficiency in solar cells. The theorem is vital for a fundamental understanding of solar cell operation and its application to device evaluation. Furthermore, with this theorem, it is also possible to estimate the open-circuit voltage (${V}_{\mathrm{OC}}$) of solar cells using the external radiative efficiency (${\ensuremath{\eta}}_{\mathrm{ext}}$) obtained from the absolute value of EL emission intensity, even for solar cells for which we cannot directly measure ${V}_{\mathrm{OC}}$, such as subcells of multijunction solar cells or individual $\mathrm{Si}$ cells in modules and arrays. However, it is not a priori obvious that the optoelectronic reciprocity theorem holds for the various solar cells that exist. In this study, we report the results of qualitative and quantitative confirmation of the validity of the optoelectronic reciprocity theorem for high-efficiency ${\mathrm{Cu}\mathrm{In}}_{1\ensuremath{-}x}{\mathrm{Ga}}_{x}{\mathrm{Se}}_{2}$ (CIGS) solar cells fabricated by us. The results confirm that our CIGS solar cells qualitatively and quantitatively satisfy the optoelectronic reciprocity theorem within the limits of measurement uncertainty. Also, we experimentally confirm that the value of the diode ideality factor for the applied voltage dependence of the EL emission intensity is exactly unity when the emission mechanism is the band-edge emission due to the direct recombination of electron-hole pairs. Finally, the importance of the ${\ensuremath{\eta}}_{\mathrm{ext}}$ for improving solar cell efficiency is explained.

Intramolecular charge transfer enables highly-efficient X-ray luminescence in cluster scintillators

Luminescence clusters composed of organic ligands and metals have gained significant interests as scintillators owing to their great potential in high X-ray absorption, customizable radioluminescence, and solution processability at low temperatures. However, X-ray luminescence efficiency in clusters is primarily governed by the competition between radiative states from organic ligands and nonradiative cluster-centered charge transfer. Here we report that a class of Cu4I4 cubes exhibit highly emissive radioluminescence in response to X-ray irradiation through functionalizing biphosphine ligands with acridine. Mechanistic studies show that these clusters can efficiently absorb radiation ionization to generate electron-hole pairs and transfer them to ligands during thermalization for efficient radioluminescence through precise control over intramolecular charge transfer. Our experimental results indicate that copper/iodine-to-ligand and intraligand charge transfer states are predominant in radiative processes. We demonstrate that photoluminescence and electroluminescence quantum efficiencies of the clusters reach 95% and 25.6%, with the assistance of external triplet-to-singlet conversion by a thermally activated delayed fluorescence matrix. We further show the utility of the Cu4I4 scintillators in achieving a lowest X-ray detection limit of 77 nGy s−1 and a high X-ray imaging resolution of 12 line pairs per millimeter. Our study offers insights into universal luminescent mechanism and ligand engineering of cluster scintillators.

Steric Rooted Multi‐Resonant Thermally Activated Delayed Fluorescent Emitters for Pure Blue Organic Light Emitting Diodes with Ultralow Efficiency Roll‐Off

AbstractMulti‐resonant thermally activated delayed fluorescent (MR‐TADF) materials are blooming for high‐resolution organic light‐emitting diodes (OLEDs). However, boron/nitrogen (B/N)‐integrated MR‐TADF emitters suffer severe efficiency roll‐off from their strong inter‐molecular π–π interactions. Herein, versatile narrowband pure blue emitters (mono‐mx‐CzDABNA and tri‐mx‐CzDABNA) are demonstrated featuring a ring‐fused extended π‐skeleton: a classic steric hindrance and rigidity accessed by integrating with meta‐xylene (mx) rotors. tri‐mx‐CzDABNA shows a narrowband (FWHM, 26 nm) pure blue emission (λmax, 462 nm) with substantial hypsochromic shift (12 nm) while maintaining MR‐TADF characteristics. The key solid‐state analyses conclude that they conceivably suppress the non‐radiative energy loss, thus improving the photoluminescence quantum yield (PLQY &gt; 90%) and rate of reverse intersystem crossing (RISC) (kRISC ≈2.85 × 105 s−1). The integration of tri meta‐xylene significantly leads to an enhanced horizontal dipole ratio (HDR) from 65% to 85%. Hyperfluorescent‐OLEDs are fabricated using designed MR‐TADF as terminal emitter, achieving a narrowband (FWHM, 34 nm) pure blue electroluminescence (λmax, 472 nm) and maximum external quantum efficiency (EQEmax) of 26.97% with magnificently suppressed efficiency roll‐off (7.8%) at 1000 cd m−2. So, it is believed that regulation of internal efficiencies and high color purity can amplify the route to achieving a narrowband pure blue emission through new synthetic MR‐TADF approaches.

Enhancing Triplet-Triplet Upconversion Efficiency and Operational Lifetime in Blue Organic Light-Emitting Diodes by Utilizing Thermally Activated Delayed Fluorescence Materials.

In the process of triplet-triplet upconversion (TTU), a bright excited singlet can be generated because of the collision of two dark excited triplets. In particular, the efficiency of TTU is crucial for achieving a high exciton production yield in blue fluorescence organic light-emitting diodes (OLEDs) beyond the theoretical limit. While the theoretical upper limit of TTU contribution yield is expected to be 60%, blue OLEDs with the maximum TTU contribution are still scarce. Herein, we present a proof of concept for realizing the maximum TTU contribution yield in blue OLEDs, achieved through the doping of thermally activated delayed fluorescence (TADF) molecules in the carrier recombination zone. The bipolar carrier transport ability of TADF materials enables direct carrier recombination on the molecules, resulting in the expansion of the recombination zone. Although the external electroluminescence quantum efficiency of OLEDs is slightly lower than that of conventional TTU-OLEDs due to the low photoluminescence quantum yield of the doped layer, the TTU efficiency approaches the upper limit. Furthermore, the operational device lifetime of OLEDs employing TADF molecules increased by five times compared to the conventional ones, highlighting the expansion of the recombination zone as a crucial factor for enhancing overall OLED performance in TTU-OLEDs.

Buried Interface Passivation of Perovskite Solar Cells by Atomic Layer Deposition of Al2O3

Despite having long excited carrier lifetimes and high mobilities in hybrid halide perovskite materials, conventional (n-i-p) devices exhibit significant interfacial nonradiative recombination losses that are little understood but limit the radiative efficiency and the overall open-circuit potential. In this Letter, we reveal that the process of spiro-OMeTAD coating on perovskite gives rise to buried defect states, which are detrimental to the devices’ operational stability. We subsequently report a method to passivate these deleterious buried defect states by atomic layer deposition of Al2O3 through controlled precursor dosages on fully functional devices. The process results in notable improvements in the overall device performance, but the underlying root-cause analysis is what we essentially aimed to elucidate here. The reported passivation technique results in (a) an increase in the efficiency primarily due to an increase of VOC by ∼60–70 mV and consequently (b) enhanced photoluminescence and higher electroluminescence quantum efficiency and (c) overall device operational (MPPT) stability under ambient and, exclusively, even under high vacuum (>300 h) conditions, which is otherwise challenging.