Extent Of Sediment Contamination Research Articles

Distribution of metals and extent of contamination in sediments from the south-eastern Baltic Sea (Lithuanian zone)

Summary The distribution of metals (Pb, Cu, Cd, Ni, Cr, Zn) in surface sediments and the potential pollution sources in the south-eastern part (SE) of the Baltic Sea (Lithuanian zone) were investigated in relation to the environmental characteristics (amount of fine-grained particles, TOC content in sediments, origin of sedimentary organic matter, salinity, water depth) in 2011–2014. The higher metal concentrations were measured in sediments of the Curonian Lagoon and in the open waters. An approach using various environmental indices (enrichment factor EF, geoaccumulation index Igeo and contamination factor CF) was used to quantitatively assess a contamination degree. The principal component analysis (PCA) was applied in order to further scrutinize pollution from metal sources. The values of the contamination indices showed no/very low sediment contamination with Ni and Cr, minor–moderate contamination with Cu, Zn and Pb and moderate–considerable pollution with Cd. The strong relationships among metals suggested their similar distribution pattern and a combination of natural and anthropogenic sources. The higher metal concentrations coincided with an increasing amount of fine-grained fraction and organic carbon. In the territorial waters, the distribution of elements was related to the water depth. In addition, the binding of metals with insoluble iron sulphides might explain their high concentrations at the most remote and deepest stations.

Heavy metal contamination in sediments of Balanagar industrial area, Hyderabad, Andra Pradesh, India

Environmental geochemical studies were carried out to find out the extent of contamination in sediments due to heavy metals in Balanagar industrial area, Hyderabad, Andhra Pradesh, India. The industrial area consisting of 350 small and large industries manufacturing battery, steel planting, pharmaceutical chemicals, metal plating, etc. The present study was undertaken on sediment contamination in Balanagar industrial area, to determine extent and distribution of heavy metals (Cu, Cr, Ni, Pb, Zn, As) and to delineate the source. There is no treatment plant in the industrial area, and many industries release the effluents into nearby nalas and lakes. Solid waste from the industries is also being dumped along the roads and near the open grounds due to which heavy metals migrate from solid waste to the groundwater. The sediments samples were collected from the study area in clean polythene covers and were analyzed for their heavy metals by X-ray fluorescence spectrometry. The concentration ranges of different heavy metals were Cr, 96.2–439.6 mg/kg; Cu, 95.7–810 mg/kg; Ni, 32.3–13,068.2 mg/kg; Pb, 59.2–512 mg/kg; Zn, 157.1–4,630.5 mg/kg; Co, 1.8–48.3 mg/kg; and V, 35.2–308.5 mg/kg. High concentration of heavy metals in sediments can be attributed to some pharmaceutical and metal industries in the study area. Based on the results obtained, suitable remedial measures can be adopted such as phytoremediation and bio-remediation for reduction of heavy metals in sediments.

Trace metals, PAHs, and PCBs in sediments from the Jobos Bay area in Puerto Rico

This study provides baseline information on the extent of contamination in sediments of the Jobos Bay estuary and surrounding areas in Puerto Rico. Sediments from Jobos Bay area (n=14) had higher overall average concentrations than those from La Parguera area (n=5, used as reference site), in μg/g dw, for As (17 vs 9), Cu (29 vs 14), Pb (11 vs 4), and Zn (64 vs 28); and in %, for Fe (2.6 vs 0.6). Sediments (n=8) screened for PAHs and PCBs exhibited total concentrations (ng/g dw) that ranged from 40.4 to 1912, and from not detected to 11.21, respectively. The quality of sediments of Jobos Bay could be classified as low to moderate pollution. The proximity to anthropogenic sources of contamination warrants a monitoring program for inorganic and organic pollutants in Jobos Bay area for an effective coastal management program of this tropical ecosystem.

Habitat Conditions and Correlations of Sediment Quality Triad Indicators in Delaware Bay

This paper summarizes sampling results from NOAA's National Status and Trends (NS&T) Program for marine environmental quality in Delaware Bay. A stratified-random design was used to determine the spatial extent of sediment contamination and toxicity in Delaware Bay from offshore stations in the coastal zone, the lower estuary, the upper estuary, the fresh/salt mixing zone, and tidal fresh areas. Sediment samples were taken for chemical analyses of major classes of environmental contaminants, a suite of toxicity bioassays, and benthic macrofaunal community assessment to identify patterns of resident species. The tidal-fresh areas and portions of the mixing zone of the study area were heavily contaminated. Contaminant concentrations were frequently above the 90th percentile of EMAP Virginian Province levels. PAHs in the sediment were higher than previously documented, with a major component of PAHs being pyrogenic in origin. Bioassay results were highly variable. Toxicity and contaminant levels were correlated when aggregated into indices, but were only marginally correlated with benthic community impacts. High and low abundance stations were found in all zones. Most of the tidal fresh stations were dominated by pollution tolerant species. Species diversity and abundance were generally lowest in the fresh/salt mixing zone.

Island-arc geochemical signatures of Cenozoic alkali-rich intrusive rocks from western Yunnan and their implication

Alkali-rich intrusive rocks in western Yunnan were derived from an enriched lithospheric mantle (EM II) source. The data available indicated they are alkali-rich (K2O + Na2O > 8wt%) and shoshonitic. Although formed in a within-plate environment they exhibit signatures of arc magmatic rocks, such as high amounts of LILE and LREE relative to the HFSE and HREE, and thus high Ba/Nb, Ba/Zr, Sr/Y, La/Yb ratios as well as mimic chondrite-normalized REE and primitive mantle-normalized trace element patterns of subducted sediments, and they fall in the collision- or arc-related tectonic setting field on all discrimination diagrams. This might suggest the enrichment be related to the substantial extent of sediment contamination by the Mesozoic Tethyan subduction processes.

Concentrations of elements and metals in sediments of the southeastern Gulf of Mexico

This paper deals with the extent of contamination in sediments of the southeast Gulf of Mexico. The concentration of elements (SiO2, Al2O3, Fe2O3, Na2O, MgO, CaO, and K2O) and heavy metals (Cu, Cd, Zn, Co, Pb, Ag, Cr, Ni, V, and Ba) were determined. The elemental composition of sediments is influenced by the Grijalva–Usumacinta–Terminos System at the east and the Tabasco lagoon system (El Carmen–La Machona) at the west coast of the study area. Concentrations of Ni, V, and Ba were anomalously high at some sites. Oil production activities in the vicinity of the sites may be responsible for the high values. Correlations of metal concentrations to elemental composition were performed. No significant relationships between metals and elements were found for most metals (p>0.05), suggesting that metals are not significantly associated with naturally occurring aluminosilicates, iron hydroxide, and calcium carbonate minerals of sediments. Other sources such as organic matter may be contributing to the total concentration of metals. The comparison of metal content in sediments of the southeast Gulf of Mexico with metals of the other areas of the Gulf of Mexico suggests that it is relatively contaminated with Cd, Pb, and Ni. The probable causes of contamination are briefly discussed.

Bioavailability of sedimentary metals from a contaminated bay

Sediments are considered the sink for metals in aquatic environments because of their strong metal-binding capacity, but they are a potential source for metal ingestion by marine benthic animals as well. Sediment contamination is now a major environmental problem in many countries, including China. This study examines the bioavailability to a marine suspension-feeder (the clam Mactra veneriformis) and a deposit-feeder (the peanut worm Sipunculus nudus) of sediment-bound Cd, Cr and Zn along a gradient of metal contamination. To this end, metal assimilation efficiency and metal extraction by gut juice were quantified and compared. Metal concentrations in sediments col- lected from 4 sites were 5.40 to 43.7 mgCd kg -1 , 32.8 to 71.2 mgCr kg -1 , and 278 to 5 380 mgZn kg -1 . Metal assimilation by the clams was independent of the metal concentration in the sediment. In the deposit-feeding sipunculid, the bioavailability of sediment-bound Cd increased with increasing con- tamination of the sediment, as a result of the increasing partitioning of Cd into the easily exchange- able phase, and decreasing partitioning into the reducible phase. Cd assimilation also increased with increasing total organic carbon content in the sediments.The Cd assimilation efficiency was directly correlated to Cd extraction by gut juices collected in vitro from the peanut worm. No such relation- ship was found for Cr and Zn. Geochemical and biological controls on metal bioavailability therefore differ between the metals and with the extent of sediment contamination. The limitation of the radio- tracer technique to quantify metal assimilation efficiency by marine benthic invertebrates from sedi- ments should be recognized when it is used to predict metal concentrations in target animals.

Micropollutants and organic carbon concentrations in surface and deep sediments in the Tunisian coast near the city of Sousse

A radioactive tracer was used to map the plume of the effluent of a municipal water treatment plant located on the Tunisian coast, close to the city of Sousse. A sampling campaign was programmed on the basis of the radioactivity distribution. The extent of sediment contamination was investigated to determine the impact of the plant effluent. Organic carbon and organic micropollutants (PCBs and chlorinated pesticides) were analysed on resuspendable particulate matter, on grab and core sediments. The area distributions of different compounds analysed were studied and relationships were investigated between radioactivity and organic carbon and micropollutant data. The study shows that sludge particles are deposited and accumulate in the zone south of the effluent outlet, contaminating sediments. Good correlations were found which demonstrate the efficiency of the technique used to plan the sampling and the link between organic carbon and organic micropollutants.

Sediment quality of North Carolina estuaries: an integrative assessment of sediment contamination, toxicity, and condition of benthic fauna

Sediment quality of North Carolina estuaries was evaluated using synoptic data on sediment chemistry, toxicity, and macroinfaunal community structure from 175 subtidal stations sampled during the summers of 1994–1997. The study area included Currituck, Albemarle, and Pamlico Sounds; estuarine portions of major rivers (e.g., Chowan, Roanoke, Tar-Pamlico, Neuse, New, Cape Fear); and numerous smaller tributaries and coastal embayments between the Virginia and South Carolina borders. A probabilistic sampling design permitted statistical estimation of the spatial extent of degraded versus non-degraded condition across these estuaries. Over half (54 ± 7%) of the surveyed area had high sediment quality characterized by healthy benthic assemblages and low levels of sediment contamination and toxicity. The remaining 46% showed evidence of significant stress in one or more of the above sediment-quality-triad components. While this is a sizable area, portions of it (27 ± 6%) were represented by sites with no connection between presence of stressors and adverse biological responses. Only 19% of the total area showed evidence of an impaired benthos coupled to significant pollution exposure (high sediment contamination, toxicity, or both). Impaired benthic condition was more closely linked to sediment contamination than to low dissolved oxygen (based on instantaneous oxygen measurements). The most pervasive contaminants were the metals arsenic, mercury, chromium, and nickel; the pesticides lindane, dieldrin, DDT, and DDT derivatives; and total PCBs. Degraded condition in all three components of the sediment quality triad co-occurred in <10% of the study area, suggesting that strong contaminant-induced effects on the benthos are limited to a small (yet ecologically significant) percentage of total estuarine area. The spatial extent of sediment contamination and toxicity was much less in these estuaries in comparison to other U.S. coastal regions where similar studies have been performed.

Streamlining contaminated sediment management: the use of advanced sediment characterization — preliminary results

Simply knowing the geographic extent of sediment contamination within a bay or estuary does not provide sufficient insight to help a site manager or stakeholder begin to assess how to manage sediments deemed either an ecological risk or regulatory violation. A better approach is to assess contaminant distribution and behavior at a micro-scale in parallel with macro-scale site assessments. In such an approach, a site investigation includes an assessment of contaminant/sediment biogeochemistry, as it will impact bioavailability, risk, and potential management options. This paper reviews some approaches for assessing contaminant bioavailability, distribution and degradability, and presents preliminary results from some biogeochemical sediment assays. Some of the potential uses and limitations of such assays are discussed. Selective leaches, using alcohol or digestive juices to determine bioavailable contaminant fractions still require some validation. Assessments of contaminant distribution as a function of grain size can lend insight into both contaminant mobility and management strategies. Biodegradation studies in real sediments are complicated by analytical and heterogeneity difficulties, but can, if carried out carefully, provide useful information.

Assessing Contamination in Great Lakes Sediments Using Benthic Invertebrate Communities and the Sediment Quality Triad Approach

Sediments in many Great Lakes harbors and tributary rivers are contaminated. As part of the USEPA's Assessment and Remediation of Contaminated Sediment (ARCS) program, a number of studies were conducted to determine the nature and extent of sediment contamination in Great Lakes Areas of Concern (AOC). This paper describes the composition of benthic invertebrate communities in contaminated sediments and is one in a series of papers describing studies conducted to evaluate sediment toxicity from three AOC's (Buffalo River, NY; Indiana Harbor, IN; Saginaw River, MI), as part of the ARCS Program. Oligochaeta (worms) and Chironomidae (midge) comprised over 90% of the benthic invertebrate numbers in samples collected from depositional areas. Worms and midge consisted of taxa identified as primarily contaminant tolerant organisms. Structural deformities of mouthparts in midge larvae were pronounced in many of the samples. Good concurrence was evident between measures of laboratory toxicity, sediment contaminant concentration, and benthic invertebrate community composition in extremely contaminated samples. However, in moderately contaminated samples, less concordance was observed between the benthos community composition and either laboratory toxicity test results or sediment contaminant concentration. Laboratory sediment toxicity tests may better identify chemical contamination in sediments than many commonly used measures of benthic invertebrate community composition. Benthic measures may also reflect other factors such as habitat alteration. Evaluation of non-contaminant factors are needed to better interpret the response of benthic invertebrates to sediment contamination.