Extensional Collapse Research Articles

The collapse of the Caledonian orogen in SW Norway: Insights from quartz textures

Extensional collapse is a common late-to post-collisional feature of orogens. It is particularly prominent in the SW Scandinavian Caledonides, where extensional detachments formed progressively from the initial reactivation of the basal thrust zone to the formation of hinterland-dipping extensional shear zones. A mature stage, documented here, involves the development of bivergent (both hinterland- and foreland-dipping) shear zones and associated vertical basement mobilization. The main foreland-facing extensional shear zone in the study area is the Bergen Detachment – an until recently overlooked or misinterpreted structure. This detachment overprints top-to-W mylonitic fabrics related to the earlier Devonian extension stages and developed in response to the updoming of the Baltica basement west of Bergen (the Øygarden Complex) into a late core complex. Our microstructural and textural examinations suggest that for both the Hardangerfjord Shear Zone and the Bergen Detachment, strain was localized by activation of dislocation creep in quartz through the operation of multiple slip systems in the <a> direction, predominantly prism <a> and rhomb <a>. These examinations and existing radiometric age constraints suggest that the progressive shear zone development occurred over maybe as little as 5 million years, under upper to middle greenschist facies conditions. Synkinematic cooling brought both the Bergen Detachment and Hardangerfjord Shear Zone through the ductile-brittle transition zone. The main explanation for this prolonged collapse development is 1) that the early low-angle detachment became too low-angle for continued shearing, giving rise to the first hinterland-dipping set of shear zones, and 2) that the basement weakened rheologically and mobilized gravitationally with the formation of large upright folds with new detachments along their flanks (the bivergent stage), including the Bergen Detachment.

Are the Carpathians tectonically active?: Geomechanical study in deep boreholes in the outer Carpathians (Poland)

Present-day tectonic stress state was investigated in three deep boreholes located in the eastern segment of the Polish Outer Carpathians (POC). Significant rotations of the maximum horizontal stress (SH) were observed in these boreholes, located at the hinge of the anticlines in the upper part of the nappes. For the deepest borehole, D-1 (5.5 km depth), 1D geomechanical modelling was performed to determine the stress gradient profiles. An optimal solution of the model, validated by numerous compressional and extensional failures (breakouts and drilling-induced fractures, respectively) of the borehole wall, was obtained for variable elastic horizontal strain. The strain varies stepwise across the Main Thrust Fault (MTF) and linearly within its walls. The dominance of a strike-slip faulting stress regime was determined for the Carpathian nappes, with contributions from thrust faulting above the MTF and normal faulting below the MTF. A critical stress state for reactivation of preferentially oriented pre-existing faults and fractures was inferred for the competent strata. A consistent interpretation of the variations in stress orientation and magnitude, suggests a contemporary refolding of the anticline at a shallower structural level, enhanced by the reactivation of the MTF and a lack of reactivation of the Carpathian Bottom Thrust. Integration of these results with measurements from previous studies in the eastern segment of the POC indicates a different regional orientation of SH in the autochthonous basement (N-S) and in the nappes (NE-SW). These results indicate a thin-skinned compressive reactivation of the upper part of the accretionary wedge, with the lower part of the nappes remaining passive, or locally prone to minor strike-slip or normal faulting. These results contradict the hypothesis of a contemporaneous extensional collapse of the POC.

East Siberian Sea Composite Tectono-Sedimentary Element, Siberian Arctic

The East Siberian Sea Composite Tectono-Sedimentary Element (ESS CTSE) occupies most of the central and southern parts of the East Siberian Sea (ESS) and extends onshore into the Chukchi Peninsula. The first multichannel seismic reflection data, acquired in this region in 1989 and 1991 revealed its structural complexity and the presence of a deep sedimentary depocentre in its central part. In the 2010s, the first long-offset seismic data provided a much better understanding of the geology of this remote segment of the Arctic shelf. It includes a large extensional basin that started to form in the Albian (?)-Cenomanian, postdating the Barremian-Aptian Chukotkan orogeny and formation of the New Siberian-Chukchi Fold-and-Thrust Belt (FTB). The latter experienced extensional collapse and developed into the tectonic basement that underlies the CTSE over its entire extent. The ESS CTSE is mainly composed of Upper Cretaceous-Holocene siliciclastic sedimentary strata with a total thickness up to 14 km. This succession has not been drilled deep enough to test its hydrocarbon potential since the beginning of exploration around 2013. However, the strata contain abundant terrestrial organic matter and are considered as potential source rocks sufficient for generating gas accumulations.

Magnetization related to late-Variscan extensional collapse in the Lugo Dome (NW Iberian Massif): a metamorphic petrology approach

The Eastern Galicia Magnetic Anomaly (EGMA) is one of the most distinctive and best studied magnetic anomalies in Iberia. It is located in NW Spain and overlaps the Variscan gneissic domes of Lugo and Sanabria. The Lugo Dome, in the north of the EGMA, deforms a large thrust sheet, the Mondoñedo Nappe, allowing the outcropping of its relative autochthon in the Xistral Tectonic Window, where extensional detachments resulting from late-Variscan tectonics crop out. A younger major detachment, the Viveiro Fault, developed on the western limb of the dome. Detailed ground-based magnetic mapping and geological charts show a clear spatial relationship between magnetic maxima and the extensional structures. Magnetic and paleomagnetic studies carried out on samples from this region indicate that rocks in the detachments commonly bear magnetite and hematite carrying induced but also remanent magnetizations and a very well-defined anisotropy of the magnetic susceptibility with directions matching those of the late-Variscan extensional fabrics.Three pairs of metasedimentary samples in equivalent structural positions display variously developed medium-pressure Barrovian parageneses attributed to the early compressional phases of the Variscan orogeny, and low-pressure Buchan-type parageneses associated with the late Variscan extension. Our phase diagram-based petrological study suggests that the non-magnetic samples preserve the Barrovian conditions of 560–640 °C, 5–8.7 kbar. The lithologically and structurally equivalent samples, originally non-magnetic, developed magnetite/hematite-bearing mineral assemblages during decompression and cooling to 500–620 °C, 1.5–6 kbar. This recrystallization was probably assisted by metasomatic oxidizing fluids. The induced component of magnetization is essentially carried by magnetite, while hematite seems the main carrier of remanence. These results support the existing cartographic, geophysical and paleomagnetic findings indicating that the magnetization in the Lugo Dome is related to late-Variscan extension.

Deformation Mechanisms During the Syn‐Orogenic Extrusion of the High‐Pressure Phyllites‐Quartzites Unit in the Central and Northern Peloponnese, Greece

AbstractThe High‐Pressure Phyllites‐Quartzites (PQ) unit of the External Hellenides is exposed in tectonic windows in the central and northern Peloponnese (Greece). Understanding the deformation history of this unit is essential to interpreting the Oligo‐Miocene evolution of the External Hellenides belt and its associated exhumation events. This study integrates new field observations and microtectonic analyses with previous studies to offer a comprehensive deformation model of the PQ unit since the Late Oligocene. The first deformation phase (D1), captures the progressive incorporation of the PQ into an orogenic wedge. This phase is largely overprinted and only preserved as relict features. The second phase (D2) displays coeval top‐to‐the‐ENE and top‐to‐the‐WSW localized ductile shear. A transition is observed from top‐to‐the‐ENE non‐coaxial deformation at the upper parts of the nappe to intense isoclinal folding (refolding S1) at the lower structural levels. We associate D2 with the ductile syn‐orogenic exhumation of the PQ within an extrusion wedge, accompanied by greenschist‐facies retrogression. In the third phase (D3), semi‐brittle to brittle extensional fault planes cut through the previous ductile structures. D3 faults exhibit extensional kinematics in all directions on the flanks of exhumation domes. This phase correlates with a late‐orogenic doming event, marking the final exhumation stage of the PQ unit in the upper crust. The exhumation of high‐pressure units results from the interplay between ductile syn‐orogenic extrusion and continuous underplating within the subduction zone. This underplating maintains vertical movements and uplift of the units, initiating a 3D upper‐crustal extensional collapse along low‐angle normal faults.

The Early Mesozoic NE–SW Extensional Model and Exhumation Processes at the Southeastern Margin of the Central Asian Orogenic Belt: Insights from the Strain and Kinematic Vorticity Analysis of the Sonid Zuoqi Ductile Detachment Zone

AbstractThe Sonid Zuoqi ductile detachment zone is located at the southeastern margin of the Central Asian orogenic belt (CAOB), striking EW and dipping to the S. The major rock type of the Sonid Zuoqi ductile detachment zone is mylonite derived from granite. The sequence of mylonite features is: (1) S and C foliations of mylonite, and (2) extensional crenulation cleavage (ecc) or C' and the kinematic vorticity (Wk) value changed from 0.70 to 0.95 and from 0.37 to 0.69, respectively; the strain type of the mylonites within the Sonid Zuoqi ductile detachment zone is compressional to planar strain. The strong deformation mylonite and Halatu plutons yielded a zircon U‐Pb age of 244 Ma and a zircon (U‐Th)/He age of 214 Ma, respectively. Based on the strain and kinematic vorticity analysis, together with the zircon U‐Pb and zircon (U‐Th)/He ages and the regional tectonic background, the study area experienced three stage evolution: tangential simple‐shear (244 Ma), simple‐shear‐dominated general shear represented by upper crustal extension (224 Ma) and pure–shear–dominated general shear represented by the Halatu pluton doming (214 Ma), which constrained the early Mesozoic NE‐SW crustal extension at the southeastern margin of the CAOB. This NE‐SW extension probably originated from the post‐orogenic extensional collapse of the CAOB, subsequent exhumation being controlled by the far afield effects of the closure of the Mongol‐Okhotsk belt.

Late Cretaceous cooling and pulsed cenozoic uplift in the Fenghuang Shan: Insights into the tectonic evolution of the Qinling Orogen, central China

Reactivation of the Qinling Orogen since the Late Jurassic has been controlled by the combined effects of the convergence between the South and North China blocks, the subduction of the Pacific Plate, and the northeastward expansion of the Tibetan Plateau. In this study, we present new apatite (U–Th)/He ages from a vertical transect in the Fenghuang Shan located in the North Daba Mountains, where rapid cooling at ∼95-90 Ma is identified. Inverse thermal history modeling results reveal another pulse of accelerated exhumation at ∼50 Ma. In addition, we analyzed longitudinal profiles of rivers draining the northern flank of the Fenghuang Shan and identified knickpoints that break channels into gentle upstream and steep downstream segments. We deduce that these knickpoints were initiated by an increase in the mountain-bounding fault throw, based on nearly constant chi values (an integral to the upstream drainage area distribution) and a reliance of knickpoints’ retreat distances on catchment areas. Assuming a linear slope exponent and erodibility of 10−6 m0.1/a, we estimated knickpoint ages to be ∼5.7 ± 1.7 Ma. We interpret the Late Cretaceous cooling as a result of lithospheric extensional collapse following the Late Jurassic intra-continental compression between the North and South China blocks. The early Cenozoic exhumation might relate to the active normal faulting, as a far-field response to the west Pacific back-arc extension. The expansion of the NE Tibetan Plateau may have triggered the late Miocene uplift of the mountain range. The multiple episodes of tectonic events in the Fenghuang Shan might correspond to various geodynamic regimes on the tectonic evolution in the Qinling Orogen.

T-t Evolution of the Early Proterozoic Rocks in the Northern Ladoga Region from the Data on U-Pb, Rb-Sr and Sm-Nd Systems in Minerals

This paper presents the results of a study of isotopic systems in minerals and rocks in southern margin of the epi-Archean Karelian craton in the zone of its junction with the Svecofennian mobile belt. U-Pb, Sm-Nd and Rb-Sr mineral ages of metamorphic rocks allowed reconstructing a T-t trend during ~1.88–1.61 Ga, which reflects a wide-ranging cooling history of metamorphic rocks from the peak values of about 650–700 °C at 1.88–1.79 Ga (U-Pb age of monazites and apparent oldest Sm-Nd age of amphiboles) to 300–400 °C at 1.61 Ga (model Rb-Sr age of biotites) in zones of low- and medium-temperature metamorphism. The specificity of removal of deep-seated rocks to the present-day erosion surface and the reconstructed T-t trend comply with the development of thrust-nappe structures during the exhumation of the Svecofennids. It is also assumed that differential vertical block movements played a significant role during the post-orogenic extensional collapse and neorifting.

The Ottawa River Gneiss Complex revisited: definition of the metamorphic core and detachment zone of a large Grenvillian metamorphic core complex

Using new and published data, we synthesize the tectonic evolution of the Ottawa River Gneiss Complex (ORGC), the metamorphic core and detachment zone of a large mid- to late-Ottawan metamorphic core complex in the western Grenville Province. Field and petrologic data indicative of retrogression and exhumation, combined with maps and schematic crustal-scale sections, are used to document spatial and temporal relationships of multi-scale structures developed during its formation, of which the largest, termed mega-cross-folds and megaboudins, occur within and define the detachment zone. Mega-cross-folds, orogen-normal structures up to 70 km in length with coaxial constrictional fabrics in their hinge-lines, formed in a single phase of deformation during retrogression and exhumation. A cluster of asymmetric megaboudins, individually from 10–50 km long with granulite-facies cores and high-strain amphibolite-facies rims, similarly formed during syntectonic retrogression and exhumation of granulite-facies precursors. We argue the mega-cross-folds developed in a regime of regional transtension, whereas the megaboudin cluster formed by extensional inversion of an anastomosing early-Ottawan thrust system, with the strain patterns of both suggesting the detachment zone was the site of intense ductile flow between the stronger metamorphic core and cover. Comparison of these results with generic numerical models of extensional collapse of overthickened continental crust suggests the first-order tectonometamorphic features of the ORGC developed during necking of the upper crust and associated large-scale extensional flow of the mid and lower crust into the domiform necked region during collapse of the early-Ottawan thrust stack.

Evolution of Arc‐Continent Collision in the Southeastern Margin of the South China Sea: Insight From the Isugod Basin in Central‐Southern Palawan

AbstractThe evolution of arc‐continent collision between the Palawan microcontinental block and the Cagayan Ridge in the southeastern margin of the South China Sea (SCS) is vital to understand how this collision correlated with seafloor spreading of the SCS. To address the evolution of arc‐continent collision, we studied the biostratigraphy and provenance of syn‐collisional sediments in the Isugod Basin in central‐southern Palawan. Microfossil analysis indicates a Late Miocene age (11.5–5.6 Ma) for the Isugod and Alfonso XIII Formations and rapid subsidence during initiation of the basin which may have been triggered by local extensional collapse of the wedge in response to forearc uplift. Multidisciplinary provenance analysis reveals that the Isugod and Alfonso XIII Formations were derived from the Middle Eocene–lower Oligocene Panas‐Pandian Formation on the Palawan wedge and the Late Eocene Central Palawan Ophiolite. These results suggest the emergence of both the orogenic wedge and obducted forearc ophiolite at ∼11.5 Ma, implying collision onset before ∼11.5 Ma. The collision initiation in Palawan could be better constrained to ∼18 Ma, based on the drowning of the Nido carbonate platform in the foreland. Therefore, the gravitational collapse of the Palawan wedge and the subsidence/formation of the Isugod Basin might reflect a significant uplift pulse in the hinterland of the wedge beginning within 13.4–11.5 Ma in the late stage of collision. It indicates that although compression originated from spreading of the SCS had ceased at 16–15 Ma, arc‐continent collision in Palawan did not stop and was sustained by compression from the upper plate afterward.

Early Devonian Post‐collisional Granitic Magmatism in the North Qilian Orogenic Belt, Western China: Insights into Lithospheric Delamination and Orogenic Collapse

AbstractPost‐collisional magmatism contains important clues for understanding the reworking and growth of continental crust, as well as lithospheric delamination and orogenic collapse. Early Devonian magmatism has been identified in the North Qilian Orogenic Belt (NQOB). This paper reports an integrated study of petrology, whole‐rock geochemistry, Sm‐Nd isotope and zircon U‐Pb dating, as well as Lu‐Hf isotopic data, for two Early Devonian intrusive plutons. The Yongchang and Chijin granites yield zircon U‐Pb ages of 394–407 Ma and 414 Ma, respectively. Both of them are characterized by weakly peraluminous to metaluminous without typical aluminium‐rich minerals, LREE‐enriched patterns with negative Eu anomalies and a negative correlation between P2O5 and SiO2 contents, consistent with geochemical features of I‐type granitoids. Zircons from the studied granites display negative to weak positive εHf(t) values (–5.7 to 2.1), which agree well with those of negative εNd(t) values (−6.4 to −2.9) for the whole‐rock samples, indicating that they were derived from the partial melting of Mesoproterozoic crust. Furthermore, low Sr/Y ratios (1.13–21.28) and high zircon saturation temperatures (745°C to 839°C, with the majority being &gt;800°C) demonstrated a relatively shallow depth level below the garnet stability field and an additional heat source. Taken together, the Early Devonian granitic magmatism could have been produced by the partial melting of ancient crustal materials heated by mantle‐derived magmas at high‐temperature and low‐pressure conditions during post‐collisional extensional collapse. The data obtained in this study, when viewed in conjunction with previous studies, provides more information about the tectonic processes that followed the closure of the North Qilian Ocean. The tectonic transition from continental collision to post‐collisional delamination could be constrained to ∼430 Ma, which is provided by the sudden decrease of Sr/Y and La/Yb ratios and an increase in zircon εHf(t) values for granitoids. A two‐stage tectonic evolution model from continental collision to post‐collisional extensional collapse for the NQOB includes (a) continental collision and crustal thickening during ca. 455–430 Ma, characterized by granulite‐facies metamorphism and widespread low‐Mg adakitic magmatism; (b) post‐collisional delamination of thickened continental crust and extensional collapse of orogen during ca. 430–390 Ma, provided by coeval high‐Mg adakitic magmatism, A‐type granites and I‐type granitoids with low Sr‐Y ratios.

Geochemistry of high temperature initial geothermal fluids in the Dabie orogenic belt

Analyzing the genesis and resource potential of orogenic geothermal systems poses significant challenges due to their complex geological backgrounds and evolutionary histories. This paper presents a novel synthesis of hydrogeochemical and isotope geochemical data, coupled with geological and geophysical results, to comprehensively understand the origins of deep, high-temperature orogenic geothermal systems. This understanding is achieved through the utilization of advanced geochemical modeling techniques to analyze the geochemical attributes of initial geothermal fluids. The hydrochemical and H/O/S isotopic composition of a total of 67 geothermal and non-geothermal water samples from the Dabie orogenic belt (DOB) were analyzed. Integrated multicomponent geothermometry (IMG) was employed to reconstruct the characteristics of the initial geothermal fluids, and PHREEQC inverse simulations creatively determined the most likely pathways of their genesis and evolution. The findings indicate that all geothermal waters from the three major geothermal fields of Luotian, Yingshan, and Yuexi are alkali-sulfate type waters. The initial geothermal fluids are acidic sulfate type with reservoir temperatures of 156–222 °C, 115–179 °C, and 100–189 °C, respectively. The primary processes responsible for the formation of these initial geothermal fluids are the dissolution of anhydrite from sulfide oxidation and, to a lesser extent, direct sulfide oxidation. Generally, the formation of geothermal systems in the investigated geothermal fields is associated with the extensional collapse and lithospheric thinning of the Dabie orogen since the Early Cretaceous Period. The spatial distribution of the three geothermal fields in this study corresponds to the tectonic-magmatic framework of magmatic intrusion-induced domes (Luotian and Yuexi) in the DOB. The reactivation of the Tan-Lu Fault during the Cenozoic Era suggests the presence of a deep heat source comprising magmatic and metamorphic components. This heat source, combined with the infiltration of paleo-atmospheric and modern atmospheric precipitation water along regional fault systems, results in the formation and gradual dilution of initial geothermal fluids. Neutralization occurs through interactions with calcite and fine-grained sodium aluminosilicates, ultimately leading to the formation of the collected geothermal water. The conceptual model established in this study elucidates the distinctive genesis and formation mechanism of the orogenic geothermal system exemplified by the DOB.

Petrogenesis of the Early Paleozoic Dioritic–Granitic Magmatism in the Eastern North Qilian Orogen, NW China: Implications for Tethyan Tectonic Evolution

Abstract The North Qilian Orogen witnessed the opening, subduction, and closure of the Proto-Tethys Qilian Ocean and the post-subduction of multiple exhumation events from Late Neoproterozoic to Early Paleozoic. The Early Paleozoic dioritic–granitic magmatic suites, prominently exposed in the eastern North Qilian Orogen, offer valuable insights into the evolution of the Proto-Tethys Ocean. However, their petrogenesis, magma source, and tectonic evolution remain controversial. Here, we investigate the Leigongshan, Zhigou, and Dalongcun intrusions and present geochronological, geochemical, and isotopic data, aiming to refine the comprehension of their timing and petrogenesis, which will contribute to understanding the tectonic evolution of the Proto-Tethys Ocean. Zircon U-Pb dating reveals mean ages of 471–427 Ma for these intrusions, consistent with compiled formation ages of dioritic–granitic intrusions in the eastern North Qilian Orogen, indicating close temporal links with the tectonic evolution of the Proto-Tethys Ocean during the Early Paleozoic. The studied magmatic rocks could be categorized into two major types: granitoids and diorites. The granitoids are majorly I-type granitoids that are generated through partial melting of the mafic lower crust and fractional crystallization at the middle-upper crust, with the involvement of mantle-derived materials. The diorites underwent limited crustal contamination and fractionation of hornblende, plagioclase, and some accessory minerals. They were derived mainly from the mixture of fertile mantle and reworked crustal components, with minor contributions from subduction-related slab fluids and sediment melts. In addition, all the studied Early Paleozoic dioritic–granitic intrusions (ca. 471–427 Ma) formed within subduction-related arc settings. Combined with the tectonic evolution of the Early Paleozoic Qilian orogenic system, we interpret these Cambrian to Silurian dioritic–granitic intrusions as tectonic responses to the subduction (ca. 520–460 Ma) and closure (~440 Ma) of the Proto-Tethys Ocean, whereas the Devonian Huangyanghe intrusion witnessed the final stage of extensional collapse of the Qilian orogenic system at ca. 400–360 Ma.

Resolving pressure differences within the Grand Canyon Precambrian basement: Implications for Proterozoic tectonics

Abstract Burial pressures (depths) within mountain belts place fundamental constraints on the growth and stabilization of continental crust. We report precise metamorphic pressures for ca. 1.7 Ga rocks from the Upper Granite Gorge (UGG) of the Grand Canyon (southwestern United States) and, for the first time, resolve pressure variations across this continuous exposure of mid-crustal rocks. We applied quartz-in-garnet (QuiG) barometry and pseudosection modeling to determine pressures in domains (“blocks”) with evidence of higher and lower peak metamorphic grades. New pressure-temperature (P-T) paths constructed using this integrated approach show that a hot block sample reached 7 kbar and a cold block sample never surpassed 5 kbar, revealing an ~2 kbar P difference between hot and cold blocks and delineating distinct P-T paths for these domains in the UGG. Our findings suggest that hot and cold blocks were likely metamorphosed at different crustal levels within a pre-Yavapai, Paleoproterozoic orogen and were subsequently juxtaposed during and/or after the Yavapai Orogeny at mid-crustal levels. The deformation that produced differential vertical displacement of crustal blocks post-dated peak metamorphism and could reflect extensional collapse of a large orogen and/or renewed folding and thrusting at the Paleoproterozoic Laurentian plate margin.

Middle Miocene volcanic flare up preceding and synchronous with the Langhian/Serravallian sea‐level decline in the North Pannonian Basin: Insights from 40Ar/39Ar dating, geo‐seismic analysis and 3D visualization of the subterranean Kráľová stratovolcano

AbstractThe Pannonian Basin System originated from the collision of the African and European tectonic plates, followed by the Miocene extensional collapse that led to the development of a back‐arc basins. Accurate dating is essential to comprehend the tectono‐volcanic evolution of the region, particularly in the under‐studied Danube Basin. Single‐grain 40Ar/39Ar dating has revealed that volcanic activity in the Danube Basin commenced around 14.1 million years ago, aligning with previous biostratigraphic and radioisotope data from nearby volcanic fields. The initial Middle Miocene pyroclastic deposits were generated by intermediate high K calc‐alkaline magmas, contributing significantly to the deposition of thick layers of fine vitric tuffs. The timing and chemistry of the volcanism are consistent with the Badenian rift phase in the Middle Miocene within the Carpathian–Pannonian region, suggesting an intraplate back‐arc volcanic environment. Three‐dimensional imaging has exposed the buried Kráľová stratovolcano, revealing its impressive scale with a thickness between 2620 and 5000 m and a base diameter of 18–30 km. Such dimensions place it among the ranks of the world's largest stratovolcanoes, indicating its substantial impact on the evolution of the Carpathian–Pannonian area. The complex formation history of the stratovolcano points to multiple phases of growth. Furthermore, the basin controlling Mojmírovce‐Rába fault's intersection with the stratovolcano implies that fault activity was subsequent to the volcanic activity, being younger than 14.1 million years. Regional age data consistently indicates that volcanic activity in the Danube Basin reached its zenith just prior to and during the lower/upper Badenian sea‐level fall (Langhian/Serravallian). K‐metasomatism is unique to the stratovolcanic structures and is not observed in the wider regional setting. This study supports the notion of an intricate, interconnected subterranean intrusive system within the stratovolcano, underscoring the complex interplay between geological structures and volcanic processes.

Evolution of Water-Conducting Fracture in Weakly Cemented Strata in Response to Mining Activity: Insights from Experimental Investigation and Numerical Simulation

The accurate prediction of the vertical extent of water-conducting fracture (WCF) zones in weakly cemented strata is particularly significant in preventing and controlling water hazards in western coal mines. The evolution of fractures in weakly cemented strata affected by mining disturbances was comprehensively analyzed by physical similarity models, numerical simulations, and field investigations. Results indicated that the development progress of water-conducting fractures can be divided into three phases: initial slow generation, subsequent rapid development, and eventual stabilization. The numerical simulation results revealed that in the initial stage of working face mining, the development of the plastic zone is limited, and there is minimal failure in the overlying strata; therefore, fractures are slowly produced without penetrating through the strata. When the plastic zone fully encompasses the entire main roof, it triggers severe shear failure in the overlying strata, resulting in rapid fracture propagation and penetration. Once the fracture height reaches a stable state, there is no further increase in the maximum vertical displacement of key strata, indicating the extensive collapse and compaction of the overburden as well as the stabilization of the fracture heights. A modified prediction equation for WCF in weakly cemented strata was obtained by correcting the traditional empirical formula based on field investigations. This modified prediction equation enhances the accuracy in predicting fracture heights and provides a theoretical reference to address the issue of the inaccurate prediction of the water-conducting fracture height in western mine rock strata.

Exploring the evidence of Middle Amazonian aquifer sedimentary outburst residues in a Martian chaotic terrain

The quest for past Martian life hinges on locating surface formations linked to ancient habitability. While Mars' surface is considered to have become cryogenic ~3.7 Ga, stable subsurface aquifers persisted long after this transition. Their extensive collapse triggered megafloods ~3.4 Ga, and the resulting outflow channel excavation generated voluminous sediment eroded from the highlands. These materials are considered to have extensively covered the northern lowlands. Here, we show evidence that a lacustrine sedimentary residue within Hydraotes Chaos formed due to regional aquifer upwelling and ponding into an interior basin. Unlike the northern lowland counterparts, its sedimentary makeup likely consists of aquifer-expelled materials, offering a potential window into the nature of Mars' subsurface habitability. Furthermore, the lake’s residue’s estimated age is ~1.1 Ga (~2.3 Ga post-peak aquifer drainage during the Late Hesperian), enhancing the prospects for organic matter preservation. This deposit’s inferred fine-grained composition, coupled with the presence of coexisting mud volcanoes and diapirs, suggest that its source aquifer existed within abundant subsurface mudstones, water ice, and evaporites, forming part of the region’s extremely ancient (~ 4 Ga) highland stratigraphy. Our numerical models suggest that magmatically induced phase segregation within these materials generated enormous water-filled chambers. The meltwater, originating from varying thermally affected mudstone depths, could have potentially harbored diverse biosignatures, which could have become concentrated within the lake’s sedimentary residue. Thus, we propose that Hydraotes Chaos merits priority consideration in future missions aiming to detect Martian biosignatures.

Experimental study of a 3D-printing technique combined with biphasic calcium phosphates to treat osteonecrosis of the femoral head in a canine model

ObjectiveThis study was aimed to use a digital design of 3D-printing technology to create a surgical navigation template. At the same time, biphasic calcium phosphate (BCP) was applied to treat osteonecrosis of the femoral head (ONFH) in animal models, based on accurate positioning of necrotic lesions in the navigation templates and observation of its therapeutic effect.MethodsFifteen healthy adult male and female beagle dogs weighing 20 + 2 kg were randomly divided into three groups (n = 5) after establishing a model of ONFH using the liquid nitrogen freezing method. Each model underwent necrotic lesion creation and BPC implantations on one side of the femoral head and only necrotic lesion creation on the other side of the femoral head. Each group underwent CT examination, gross observation, histological examination and immunohistochemical staining at 6 weeks, 12 weeks and 18 weeks postoperatively.ResultsAt weeks 6, 12, and 18, CT and gross examination showed that the necrotic area in the experimental group was basically intact and had been completely raised by BCP material. In the control group, there were signs of bone repair in the femoral head, but there were still large bone defects and cavities. At week 18, extensive collapse of the cartilage surface was observed. Through histological examination, in the experimental group at 12 and 18 weeks, a large number of new and reconstructed bone trabeculae containing a large amount of collagen fibres were observed (P < 0.05), while in the control group, there was extensive necrosis of the bone trabeculae without cellular structural areas. Immunohistochemical examination observation: A large number of CD31-positive cells were observed in the experimental group at 6 weeks, gradually decreasing at 12 and 18 weeks (P < 0.05), while a small number of CD31-positive cells were observed in the control group at 18 weeks.ConclusionThe 3D-printed navigation template can accurately locate ONFH lesions. Implantation of BCP material can effectively play a supporting role, prevent the collapse of the loading surface, and induce bone formation and angiogenesis to some extent.

Long‐lived high‐grade metamorphism in southern India: Constraints from charnockites and sapphirine‐bearing semipelitic granulites from the Madurai Block

AbstractThe Granulite Terrane of Southern India is a collage of Mesoarchean–Neoproterozoic crustal blocks that underwent high‐grade metamorphism associated with the final assembly of the Gondwana supercontinent during late Neoproterozoic–Cambrian. Here, we investigate the charnockites and associated sapphirine‐bearing semipelitic granulites from the eastern part of the Madurai Block (MB). We present new petrographic, mineral chemistry, and geochronological data to constrain the P–T–t evolution of the block and unravel the timescale and source of heat for the ultrahigh‐temperature metamorphism. Both the rock types contain coarse‐grained porphyroblastic garnet and orthopyroxene, yielding peak P–T conditions of 950 ± 30°C at 10.5 ± 0.8 kbar and 970 ± 40°C at 10 ± 0.5 kbar for semipelite and charnockite, respectively, using conventional thermobarometry. Peak ultrahigh temperatures are further supported by high Al content in the orthopyroxene (8.78 wt% Al2O3) coexisting with garnet (XMg: up to 0.57) and feldspar thermometry of the mesoperthites and antiperthites in the semipelite, yielding 950–980°C at 10 kbar. Subsequent decompression has led to the formation of coronal orthopyroxene3 + plagioclase3 in the charnockite and symplectic orthopyroxene3 + cordierite ± sapphirine ± plagioclase3 in the semipelite, yielding P–T range of 950–850°C and 9.5–6.8 kbar for semipelites and 950–820°C and 8–6.5 kbar for charnockite. Based on the obtained P–T estimates, preserved reaction textures, and phase equilibria modelling in the MnNCKFMASHTO system, a clockwise P–T evolution with isothermal decompression followed by cooling is inferred for both the rock types.Texturally constrained in situ monazite dating and rare earth element (REE) patterns show that the core of matrix monazite having low‐Th, Y, and extreme heavy rare earth element (HREE) depletion, yielding weighted mean ages of 582 ± 12 and 590 ± 22 Ma for semipelite and charnockite, respectively, dates the prograde evolution. The mantle of the matrix monazite in semipelite and comparable rim in charnockite, having relative Th‐enrichment compared to the core, yielding weighted mean ages of 552 ± 9 and 557 ± 13 Ma, respectively, dates extensive dissolution–reprecipitation from the melt at the peak stage. The relatively Th‐ and Y‐rich and moderately HREE‐depleted rim of matrix monazite in the semipelite, yielding weighted age of 516 ± 6 Ma, date initial garnet breakdown during post‐peak melt crystallization. By contrast, compositionally homogenous HREE + Y‐enriched monazite in the symplectite and retrograde monazites yielding weighted mean ages of 487 ± 47 Ma for semipelites and 508 ± 19 Ma for charnockites dates extensive garnet breakdown during final stages of melt crystallization and subsequent cooling. Our findings point to collision initiation at ~590 Ma, with the peak conditions attained at ~550 Ma followed by extensional collapse at ~510–490 Ma, resulting in rapid exhumation of lower crustal rocks to mid‐crustal levels under sustained ultrahigh‐temperature (UHT) conditions, followed by cooling to reach a stable geotherm. Our results suggest a long‐lived hot orogeny in the MB, where the UHT conditions were sustained for at least 40 MYr. The UHT conditions were most likely attained in the core of a long‐lived hot orogen by the combined effect of conductive heating through radioactive decay and mantle heat supply, with the former being the primary driver.

Active Collapse in the Central Betic Cordillera: Development of the Extensional System of the Granada Basin

The Betic Cordillera was formed by the collision between the Alboran Domain and the South Iberian paleomargin in the frame of the NW–SE convergent Eurasia–Nubia plate boundary. The central region is undergoing a heterogeneous extension that has not been adequately analysed. This comprehensive study addressed it by collecting structural geologic, seismologic, and geodetic data. The region west of the Sierra Nevada is deformed by the extensional system of the Granada Basin, which facilitates E–W to NE–SW extension. Moreover, the southern boundary of Sierra Nevada is affected by a remarkable N–S extension related to E–W normal to normal–dextral faults affecting the shallow crust. However, geologic and geodetic data suggest that the western and southwestern Granada Basin boundary constitutes a compressional front. These data lead to the proposal of an active extensional collapse from the uplifted Sierra Nevada region to the W–SW–S, over an extensional detachment. The collapse is determined by the uplift of the central Betics and the subsidence in the Alboran Basin due to an active subduction with rollback. Our results indicate that the central Betic Cordillera is a good example of ongoing extensional collapse in the general context of plate convergence, where crustal thickening and thinning simultaneously occur.