Exposed Heme Edge Research Articles

Hemoglobin and Myoglobin as Reducing Agents in Biological Systems. Redox Reactions of Globins with Copper and Iron Salts and Complexes.

In addition to reversible O2 binding, respiratory proteins of the globin family, hemoglobin (Hb) and myoglobin (Mb), participate in redox reactions with various metal complexes, including biologically significant ones, such as those of copper and iron. HbO2 and MbO2 are present in cells in large amounts and, as redox agents, can contribute to maintaining cell redox state and resisting oxidative stress. Divalent copper complexes with high redox potentials (E0, 200-600mV) and high stability constants, such as [Cu(phen)2]2+, [Cu(dmphen)2]2+, and CuDTA oxidize ferrous heme proteins by the simple outer-sphere electron transfer mechanism through overlapping π-orbitals of the heme and the copper complex. Weaker oxidants, such as Cu2+, CuEDTA, CuNTA, CuCit, CuATP, and CuHis (E0 ≤ 100-150mV) react with HbO2 and MbO2 through preliminary binding to the protein with substitution of the metal ligands with protein groups and subsequent intramolecular electron transfer in the complex (the site-specific outer-sphere electron transfer mechanism). Oxidation of HbO2 and MbO2 by potassium ferricyanide and Fe(3) complexes with NTA, EDTA, CDTA, ATP, 2,3-DPG, citrate, and pyrophosphate PPi proceeds mainly through the simple outer-sphere electron transfer mechanism via the exposed heme edge. According to Marcus theory, the rate of this reaction correlates with the difference in redox potentials of the reagents and their self-exchange rates. For charged reagents, the reaction may be preceded by their nonspecific binding to the protein due to electrostatic interactions. The reactions of LbO2 with carboxylate Fe complexes, unlike its reactions with ferricyanide, occur via the site-specific outer-sphere electron transfer mechanism, even though the same reagents oxidize structurally similar MbO2 and cytochrome b5 via the simple outer-sphere electron transfer mechanism. Of particular biological interest is HbO2 and MbO2 transformation into met-forms in the presence of small amounts of metal ions or complexes (catalysis), which, until recently, had been demonstrated only for copper compounds with intermediate redox potentials. The main contribution to the reaction rate comes from copper binding to the "inner" histidines, His97 (0.66nm from the heme) that forms a hydrogen bond with the heme propionate COO- group, and the distal His64. The affinity of both histidines for copper is much lower than that of the surface histidines residues, and they are inaccessible for modification with chemical reagents. However, it was found recently that the high-potential Fe(3) complex, potassium ferricyanide (400mV), at a 5 to 20% of molar protein concentration can be an efficient catalyst of MbO2 oxidation into metMb. The catalytic process includes binding of ferrocyanide anion in the region of the His119 residue due to the presence there of a large positive local electrostatic potential and existence of a "pocket" formed by Lys16, Ala19, Asp20, and Arg118 that is sufficient to accommodate [Fe(CN)6]4-. Fast, proton-assisted reoxidation of the bound ferrocyanide by oxygen (which is required for completion of the catalytic cycle), unlike slow [Fe(CN)6]4- oxidation in solution, is provided by the optimal location of neighboring protonated His113 and His116, as it occurs in the enzyme active site.

The βLys66Tyr Variant of Human Hemoglobin as a Component of a Blood Substitute.

It has been proposed that introducing tyrosine residues into human hemoglobin (e.g. βPhe41Tyr) may be able to reduce the toxicity of the ferryl heme species in extracellular hemoglobin-based oxygen carriers (HBOC) by facilitating long-range electron transfer from endogenous and exogenous antioxidants. Surface-exposed residues lying close to the solvent exposed heme edge may be good candidates for mutations. We therefore studied the properties of the βLys66Tyr mutation. Hydrogen peroxide (H2O2) was added to generate the ferryl protein. The ferryl state in βLys66Tyr was more rapidly reduced to ferric (met) by ascorbate than recombinant wild type (rwt) or βPhe41Tyr. However, βLys66Tyr suffered more heme and globin damage following H2O2 addition as measured by UV/visible spectroscopy and HPLC analysis. βLys66Tyr differed notably from the rwt protein in other ways. In the ferrous state the βLys66Tyr forms oxy, CO, and NO bound heme complexes similar to rwt. However, the kinetics of CO binding to the mutant was faster than rwt, suggesting a more open heme crevice. In the ferric (met) form the typical met Hb acid-alkaline transition (H2O to -OH) appeared absent in the mutant protein. A biphasicity of cyanide binding was also evident. Expression in E. coli of the βLys66Tyr mutant was lower than the rwt protein, and purification included significant protein heterogeneity. Whilst, βLys66Tyr and rwt autoxidised (oxy to met) at similar rates, the oxygen p50 for βLys66Tyr was very low. Therefore, despite the apparent introduction of a new electron transfer pathway in the βLys66Tyr mutant, the heterogeneity, and susceptibility to oxidative damage argue against this mutant as a suitable starting material for a HBOC.

Crystal structure analysis of peroxidase from the palm tree Chamaerops excelsa.

Palm tree peroxidases are known to be very stable enzymes and the peroxidase from the Chamaerops excelsa (CEP), which has a high pH and thermal stability, is no exception. To date, the structural and molecular events underscoring such biochemical behavior have not been explored in depth. In order to identify the structural characteristics accounting for the high stability of palm tree peroxidases, we solved and refined the X-ray structure of native CEP at a resolution of 2.6 Å. The CEP structure has an overall fold typical of plant peroxidases and confirmed the conservation of characteristic structural elements such as the heme group and calcium ions. At the same time the structure revealed important modifications in the amino acid residues in the vicinity of the exposed heme edge region, involved in substrate binding, that could account for the morphological variations among palm tree peroxidases through the disruption of molecular interactions at the second binding site. These modifications could alleviate the inhibition of enzymatic activity caused by molecular interactions at the latter binding site. Comparing the CEP crystallographic model described here with other publicly available peroxidase structures allowed the identification of a noncovalent homodimer assembly held together by a number of ionic and hydrophobic interactions. We demonstrate, that this dimeric arrangement results in a more stable protein quaternary structure through stabilization of the regions that are highly dynamic in other peroxidases. In addition, we resolved five N-glycosylation sites, which might also contribute to enzyme stability and resistance against proteolytic cleavage.

Study of cytochrome c-DNA interaction--evaluation of binding sites on the redox protein.

Artificial assemblies consisting of the cationic cytochrome c (cyt c) and double-stranded DNA are interesting for the field of biohybrid systems because of the high electro-activity of the incorporated redox protein. However, little is known about the interactions between these two biomolecules. Here, the complex of reduced cyt c and a 41 base pair oligonucleotide was characterized in solution as a function of pH and ionic strength. Persistent cyt c-DNA agglomerates were observed by UV-vis and DLS (dynamic light scattering) at pH 5.0 and low ionic strength. The strength of the interaction was attenuated by raising the pH or the ionic strength. At pH 7.0 agglomerates were not formed, allowing interaction analysis by NMR spectroscopy. Using TROSY (transverse relaxation-optimized spectroscopy)-HSQC (heteronuclear single quantum coherence) experiments it was possible to identify the DNA binding site on the cyt c surface. Numerous residues surrounding the exposed heme edge of cyt c were involved in transient binding to DNA under these conditions. This result was supported by SEC (size exclusion chromatography) experiments at pH 7.0 showing that the interaction is sufficient for co-elution of cyt c and DNA.

Leishmania major Peroxidase Is a Cytochrome c Peroxidase

Leishmania major peroxidase (LmP) exhibits both ascorbate and cytochrome c peroxidase activities. Our previous results illustrated that LmP has a much higher activity against horse heart cytochrome c than ascorbate, suggesting that cytochrome c may be the biologically important substrate. To elucidate the biological function of LmP, we have recombinantly expressed, purified, and determined the 2.08 Å crystal structure of L. major cytochrome c (LmCytc). Like other types of cytochrome c, LmCytc has an electropositive surface surrounding the exposed heme edge that serves as the site of docking with redox partners. Kinetic assays performed with LmCytc and LmP show that LmCytc is a much better substrate for LmP than horse heart cytochrome c. Furthermore, unlike the well-studied yeast system, the reaction follows classic Michaelis-Menten kinetics and is sensitive to an increasing ionic strength. Using the yeast cocrystal as a control, protein-protein docking was performed using Rosetta to develop a model for the binding of LmP and LmCytc. These results suggest that the biological function of LmP is to act as a cytochrome c peroxidase.

Structural Evidence for the Functional Importance of the Heme Domain Mobility in Flavocytochrome b2

Yeast flavocytochrome b 2 (Fcb2) is an l-lactate:cytochrome c oxidoreductase in the mitochondrial intermembrane space participating in cellular respiration. Each enzyme subunit consists of a cytochrome b 5-like heme domain and a flavodehydrogenase (FDH) domain. In the Fcb2 crystal structure, the heme domain is mobile relative to the tetrameric FDH core in one out of two subunits. The monoclonal antibody B2B4, elicited against the holoenzyme, recognizes only the native heme domain in the holoenzyme. When bound, it suppresses the intramolecular electron transfer from flavin to heme b 2, hence cytochrome c reduction. We report here the crystal structure of the heme domain in complex with the Fab at 2.7 Å resolution. The Fab epitope on the heme domain includes the two exposed propionate groups of the heme, which are hidden in the interface between the domains in the complete subunit. The structure discloses an unexpected plasticity of Fcb2 in the neighborhood of the heme cavity, in which the heme has rotated. The epitope overlaps with the docking area of the FDH domain onto the heme domain, indicating that the antibody displaces the heme domain in a movement of large amplitude. We suggest that the binding sites on the heme domain of cytochrome c and of the FDH domain also overlap and therefore that cytochrome c binding also requires the heme domain to move away from the FDH domain, so as to allow electron transfer between the two hemes. Based on this hypothesis, we propose a possible model of the Fcb2·cytochrome c complex. Interestingly, this model shares similarity with that of the cytochrome b 5·cytochrome c complex, in which cytochrome c binds to the surface around the exposed heme edge of cytochrome b 5. The present results therefore support the idea that the heme domain mobility is an inherent component of the Fcb2 functioning.

NMR Spectroscopy Reveals Cytochrome c–Poly(ethylene glycol) Interactions

Hydrophobic PEG: Chemical-shift-perturbation mapping reveals an interaction between poly(ethylene glycol) and the hydrophobic surface surrounding the exposed haem edge of cytochrome c. This suggests that PEG might be a poor choice of crowding agent in protein interaction studies. In contrast, cytochrome c can be embedded in agarose gels with little effect on the NMR spectrum.

Recognition of solvent exposed protein surfaces using anthracene derived receptors

A new class of receptor is described that can selectively bind to the solvent exposed surface of proteins such as cytochrome c and lysozyme with low micromolar affinity over cytochrome c551, alpha-lactalbumin, myoglobin and RNase A, under physiologically relevant conditions (5 mM phosphate, pH 7.4). The use of anthracene as a hydrophobic scaffold allows the receptor to act as a selective chemosensor via fluorescence quenching or FRET. The study reveals that co-operative electrostatic interactions over a large surface area dominate binding. Further investigations reveal that the receptor binds to the solvent exposed heme edge of cytochrome c inhibiting its reaction with small reducing agents and validating the strategy for the disruption of protein function.

Specific Vectorial Immobilization of Oligonucleotide‐Modified Yeast Cytochrome c on Carbon Nanotubes

Iso-1-cytochrome c from the yeast Saccharomyces cerevisiae (YCC) contains a surface cysteine residue, Cys102, that is located opposite to the lysine-rich side containing the exposed heme edge, which is the docking site for enzymes. Site-specific vectorial immobilization of YCC via Cys102 on single-walled carbon nanotubes (SWNT) thus provides a selective interface between nanoscopic electronic devices and complex enzymes. We have achieved this by modification of Cys102 with an oligonucleotide (dT(18)). Atomic force microscopy, fluorescence imaging, and cyclic voltammetry show the specific adsorption of YCC, modified with dT(18), on the SWNT sidewall with retention of its native properties. Pretreatment of the SWNT with Triton-X405 blocks the nonspecific binding of untreated YCC but does not interfere with binding of the oligonucleotide-modified YCC.

The structure and function of the cytochrome c2: reaction center electron transfer complex from Rhodobacter sphaeroides

In the photosynthetic bacterium, Rhodobacter sphaeroides, the mobile electron carrier, cytochrome c2 (cyt c2) transfers an electron from reduced heme to the photooxidized bacteriochlorophyll dimer in the membrane bound reaction center (RC) as part of the light induced cyclic electron transfer chain. A complex between these two proteins that is active in electron transfer has been crystallized and its structure determined by X-ray diffraction. The structure of the cyt:RC complex shows the cyt c2 (cyt c2) positioned at the center of the periplasmic surface of the RC. The exposed heme edge from cyt c2 is in close tunneling contact with the electron acceptor through an intervening bridging residue, Tyr L162 located on the RC surface directly above the bacteriochlorophyll dimer. The binding interface between the two proteins can be divided into two regions: a short-range interaction domain and a long-range interaction domain. The short-range domain includes residues immediately surrounding the tunneling contact region around the heme and Tyr L162 that display close intermolecular contacts optimized for electron transfer. These include a small number of hydrophobic interactions, hydrogen bonds and a pi-cation interaction. The long-range interaction domain consists of solvated complementary charged residues; positively charged residues from the cyt and negatively charged residues from the RC that provide long range electrostatic interactions that can steer the two proteins into position for rapid association.

An NMR-based docking model for the physiological transient complex between cytochrome f and cytochrome c6

The physiological transient complex between cytochrome f (C f) and cytochrome c 6 (C c 6) from the cyanobacterium Nostoc sp. PCC 7119 has been analysed by NMR spectroscopy. The binding constant at low ionic strength is 8 ± 2 mM −1, and the binding site of C c 6 for C f is localized around its exposed haem edge. On the basis of the experimental data, the resulting docking simulations suggest that C c 6 binds to C f in a fashion that is analogous to that of plastocyanin but differs between prokaryotes and eukaryotes.

Interaction of cytochrome c with cytochrome c oxidase: an NMR study on two soluble fragments derived from Paracoccus denitrificans.

The functional interactions between the various components of the respiratory chain are relatively short-lived, thus allowing high turnover numbers but at the same time complicating the structural analysis of the complexes. Chemical shift mapping by NMR spectroscopy is a useful tool to investigate such transient contacts, since it can monitor changes in the electron-shielding properties of a protein as the result of temporary contacts with a reaction partner. In this study, we investigated the molecular interaction between two components of the electron-transfer chain from Paracoccus denitrificans: the engineered, water-soluble fragment of cytochrome c(552) and the Cu(A) domain from the cytochrome c oxidase. Comparison of [(15)N,(1)H]-TROSY spectra of the [(15)N]-labeled cytochrome c(552) fragment in the absence and in the presence of the Cu(A) fragment showed chemical shift changes for the backbone amide groups of several, mostly uncharged residues located around the exposed heme edge in cytochrome c(552). The detected contact areas on the cytochrome c(552) surface were comparable under both fully reduced and fully oxidized conditions, suggesting that the respective chemical shift changes represent biologically relevant protein-protein interactions.

Introduction and characterization of a functionally linked metal ion binding site at the exposed heme edge of myoglobin.

A binding site for metal ions has been created on the surface of horse heart myoglobin (Mb) near the heme 6-propionate group by replacing K45 and K63 with glutamyl residues. One-dimensional (1)H NMR spectroscopy indicates that Mn(2+) binds in the vicinity of the heme 6-propionate as anticipated, and potentiometric titrations establish that the affinity of the new site for Mn(2+) is 1.28(4) x 10(4) M(-1) (pH 6.96, ionic strength I = 17.2 microM, 25 degrees C). In addition, these substitutions lower the reduction potential of the protein and increase the pK(a) for the water molecule coordinated to the heme iron of metmyoglobin. The peroxidase [2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonic acid), ABTS, as substrate] and the Mn(2+)-peroxidase activity of the variant are both increased approximately 3-fold. In contrast to wild-type Mb, both the affinity for azide and the midpoint potential of the variant are significantly influenced by the addition of Mn(2+). The structure of the variant has been determined by x-ray crystallography to define the coordination environment of bound Mn(2+) and Cd(2+). Although slight differences are observed between the geometry of the binding of the two metal ions, both are hexacoordinate, and neither involves coordination by E63.

Characterization of the interaction of Rhodobacter capsulatus cytochrome c peroxidase with charge reversal mutants of cytochrome c2

Steady-state kinetics for the reaction of Rhodobacter capsulatus bacterial cytochrome c peroxidase (BCCP) with its substrate cytochrome c 2 were investigated. The Rb. capsulatus BCCP is dependent on calcium for activation as previously shown for the Pseudomonas aeruginosa BCCP and Paracoccus denitrificans enzymes. Furthermore, the activity shows a bell-shaped pH dependence with optimum at pH 7.0. Enzyme activity is greatest at low ionic strength and drops off steeply as ionic strength increases, resulting in an apparent interaction domain charge product of −13. All cytochromes c 2 show an asymmetric distribution of surface charge, with a concentration of 14 positive charges near the exposed heme edge of Rb. capsulatus c 2 which potentially may interact with approximately 6 negative charges, localized near the edge of the high-potential heme of the Rb. capsulatus BCCP. To test this proposal, we constructed charge reversal mutants of the 14 positively charged residues located on the front face of Rb. capsulatus cytochrome c 2 and examined their effect on steady-state kinetics with BCCP. Mutated residues in Rb. capsulatus cytochrome c 2 that showed the greatest effects on binding and enzyme activity are K12E, K14E, K54E, K84E, K93E, and K99E, which is consistent with the site of electron transfer being located at the heme edge. We conclude that a combination of long-range, nonspecific electrostatic interactions as well as localized salt bridges between, e.g., cytochrome c 2 K12, K14, K54, and K99 with BCCP D194, D241, and D6, account for the observed kinetics.

Structure of a nitric oxide synthase heme protein from Bacillus subtilis.

Eukaryotic nitric oxide synthases (NOSs) produce nitric oxide to mediate intercellular signaling and protect against pathogens. Recently, proteins homologous to mammalian NOS oxygenase domains have been found in prokaryotes and one from Bacillus subtilis (bsNOS) has been demonstrated to produce nitric oxide [Adak, S., Aulak, K. S., and Stuehr, D. J. (2002) J. Biol. Chem. 277, 16167-16171]. We present structures of bsNOS complexed with the active cofactor tetrahydrofolate and the substrate L-arginine (L-Arg) or the intermediate N(omega)-hydroxy-L-arginine (NHA) to 1.9 or 2.2 A resolution, respectively. The bsNOS structure is similar to those of the mammalian NOS oxygenase domains (mNOS(ox)) except for the absence of an N-terminal beta-hairpin hook and zinc-binding region that interact with pterin and stabilize the mNOS(ox) dimer. Changes in patterns of residue conservation between bacterial and mammalian NOSs correlate to different binding modes for pterin side chains. Residue conservation on a surface patch surrounding an exposed heme edge indicates a likely interaction site for reductase proteins in all NOSs. The heme pockets of bsNOS and mNOS(ox) recognize L-Arg and NHA similarly, although a change from Val to Ile beside the substrate guanidinium may explain the 10-20-fold slower dissociation of product NO from the bacterial enzyme. Overall, these structures suggest that bsNOS functions naturally to produce nitrogen oxides from L-Arg and NHA in a pterin-dependent manner, but that the regulation and purpose of NO production by NOS may be quite different in B. subtilis than in mammals.

Contribution of leucine 85 to the structure and function of Saccharomyces cerevisiae iso-1 cytochrome c.

Cytochrome c is a small electron-transport protein whose major role is to transfer electrons between complex III (cytochrome reductase) and complex IV (cytochrome c oxidase) in the inner mitochondrial membrane of eukaryotes. Cytochrome c is used as a model for the examination of protein folding and structure and for the study of biological electron-transport processes. Amongst 96 cytochrome c sequences, residue 85 is generally conserved as either isoleucine or leucine. Spatially, the side chain is associated closely with that of the invariant residue Phe82, and this interaction may be important for optimal cytochrome c activity. The functional role of residue 85 has been examined using six site-directed mutants of Saccharomyces cerevisiae iso-1 cytochrome c, including, for the first time, kinetic data for electron transfer with the principle physiological partners. Results indicate two likely roles for the residue: first, heme crevice resistance to ligand exchange, sensitive to both the hydrophobicity and volume of the side chain; second, modulation of electron-transport activity through maintenance of the hydrophobic character of the protein in the vicinity of Phe82 and the exposed heme edge, and possibly of the ability of this region to facilitate redox-linked conformational change.

A modeling study of the interaction and electron transfer between cytochrome b5 and some oxidized haemoglobins.

Using Brownian motion simulations we have studied the formation of docked complexes of reduced cytochrome b5 and oxidized haemoglobin. Our results indicate that the presence of molecular electrostatic fields has a significant role to play in the formation of these complexes. In contrast to previous modeling studies on this system, we clearly identify electron transfer within an ensemble of similarly docked complexes rather than the formation of a single complex. Docking involves a number of acidic residues surrounding the exposed haem edge of cytochrome b5 and a set of basic residues surrounding the exposed haem edge of the globins. Although amino acids from the partner globin proteins are involved to a small extent in the binding of some of the complexes, the reactivity of any particular globin is essentially independent of the nature of its partner globin chain within the haemoglobin molecule. Comparison of results from adult and embryonic haemoglobins indicates a significant difference in complex formation. Application of electron tunneling analysis to the complexes allows us to predict the rates of electron transfer within each ensemble of complexes. These data provide a theoretical insight into the important process of re-reduction of oxidized haemoglobins as well as explaining the general inability to produce crystalline forms of many docked electron transfer complexes.

Structural Changes of Cytochromec552 fromThermus thermophilus Adsorbed on Anionic and Hydrophobic Surfaces Probed by FTIR and 2D-FTIR Spectroscopy

The structural changes of cytochrome c(552) bound to anionic and hydrophobic clay surfaces have been investigated by Fourier transform infrared spectroscopy. Binding to the anionic surface of montmorillonite is controlled by electrostatic interactions since addition of electrolyte (0.5 mol L(-1) KCl) causes desorption of more than 2/3 of the protein molecules. Electrostatic binding occurs through the back side of the protein (i.e., remote from the heme site) and is associated only with subtle changes of the secondary structure. In contrast, adsorption to the hydrophobic surface of talc leads to a decrease in alpha-helical structure by ca. 5% and an increase in beta-sheet structure by ca. 6%. These structural changes are attributed to a hydrophobic region on the front surface of cytochrome c(552) close to the partially exposed heme edge. This part on the protein surface is identified as the interaction domain for talc and most likely also serves for binding to the natural reaction partner, a ba(3)-oxidase. Fourier transform infrared spectra of cytochrome c(552) and the clay-cytochrome c(552) complexes have been measured as a function of time following dissolution and suspension in deuterated buffer, respectively. A two-dimensional correlation analysis was applied to these spectra to investigate the dynamics of the structural changes in the protein. For both complexes, adsorption and subsequent unfolding processes in the binding domains are faster than the time resolution of the spectroscopic experiments. Thus, the processes that could be monitored are refolding of peptide segments and side chain rearrangements following the adsorption-induced perturbation of the protein structure and the solvation of the adsorbed protein. In each case, side chain alterations of solvent-exposed tyrosine, aspartate, and glutamate residues were observed. For the cytochrome c(552)-talc complex, these changes are followed by a slow refolding of the peptide chain in the binding domain and, subsequently, a further H/D exchange of amide group protons.

Structural Changes of Cytochrome c552 from Thermus thermophilus Adsorbed on Anionic and Hydrophobic Surfaces Probed by FTIR and 2D-FTIR Spectroscopy

The structural changes of cytochrome c(552) bound to anionic and hydrophobic clay surfaces have been investigated by Fourier transform infrared spectroscopy. Binding to the anionic surface of montmorillonite is controlled by electrostatic interactions since addition of electrolyte (0.5 mol L(-1) KCl) causes desorption of more than 2/3 of the protein molecules. Electrostatic binding occurs through the back side of the protein (i.e., remote from the heme site) and is associated only with subtle changes of the secondary structure. In contrast, adsorption to the hydrophobic surface of talc leads to a decrease in alpha-helical structure by ca. 5% and an increase in beta-sheet structure by ca. 6%. These structural changes are attributed to a hydrophobic region on the front surface of cytochrome c(552) close to the partially exposed heme edge. This part on the protein surface is identified as the interaction domain for talc and most likely also serves for binding to the natural reaction partner, a ba(3)-oxidase. Fourier transform infrared spectra of cytochrome c(552) and the clay-cytochrome c(552) complexes have been measured as a function of time following dissolution and suspension in deuterated buffer, respectively. A two-dimensional correlation analysis was applied to these spectra to investigate the dynamics of the structural changes in the protein. For both complexes, adsorption and subsequent unfolding processes in the binding domains are faster than the time resolution of the spectroscopic experiments. Thus, the processes that could be monitored are refolding of peptide segments and side chain rearrangements following the adsorption-induced perturbation of the protein structure and the solvation of the adsorbed protein. In each case, side chain alterations of solvent-exposed tyrosine, aspartate, and glutamate residues were observed. For the cytochrome c(552)-talc complex, these changes are followed by a slow refolding of the peptide chain in the binding domain and, subsequently, a further H/D exchange of amide group protons.

Cytochrome c binding to Apaf-1: the effects of dATP and ionic strength.

In the apoptosis pathway in mammals, cytochrome c and dATP are critical cofactors in the activation of caspase 9 by Apaf-1. Until now, the detailed sequence of events in which these cofactors interact has been unclear. Here, we show through fluorescence polarization experiments that cytochrome c can bind to Apaf-1 in the absence of dATP; when dATP is added to the cytochrome c.Apaf-1 complex, further assembly occurs to produce the apoptosome. These findings, along with the discovery that the exposed heme edge of cytochrome c is involved in the cytochrome c.Apaf-1 interaction, are confirmed through enhanced chemiluminescence visualization of native PAGE gels and through acrylamide fluorescence quenching experiments. We also report here that the cytochrome c.Apaf-1 interaction depends highly on ionic strength, indicating that there is a strong electrostatic interaction between the two proteins.