Material Experts Research Articles

Pengembangan Asesmen Pembelajaran Berbasis Game pada Mata Pelajaran IPA Kelas VII SMP

This study aims to develop a game-based learning assessment in science subjects in grade VII junior high school that is valid and practical. This type of research is Research and Development (R&D). The model used in this development research is a 4D model. The 4D model contains 4 (four) stages of development, including define, design, develop, and disseminate. The research data was obtained through questionnaires and validation sheets, then analyzed in a quantitative descriptive manner. The development process of this game-based learning assessment product has involved a validation stage by material and media experts. A science teacher in grade VII of SMP Negeri 5 Linggo Sari Baganti acted as a material expert, while two lecturers from the Department of Curriculum and Educational Technology of Padang State University acted as media experts. The validation results show that this product is considered very valid, both in terms of material content and design. Furthermore, the trial on 18 grade VII students also produced very positive data, with an average score of 4.71 for the practicality category. Based on these results, it can be concluded that this game-based learning assessment product has gone through a good development stage and is ready to be implemented in the learning process

PENGEMBANGAN MICROLEARNING VIDEO 360° PADA FENOMENA KONTRAKSI PANJANG

Currently educators are faced with great challenges, where educators are required to develop human resources by utilizing technology, especially in modern physics learning in the era of Society 5.0. This research aims to design and develop a 360° video microlearning that is feasible to use as a learning media for modern physics courses on the topic of length contraction to support effective learning in class. This research is a type of development research using the ASSURE model. In this study, the sample used consisted of 60 respondents taken from 1 class of physics education students and 1 class of UNJ physics students. This study shows that the use of 360° videos significantly improves students' understanding of complex physics concepts and increases their involvement in the learning process. The impact can be seen from the improvement of learning quality that creates an interactive and engaging learning experience. The final product of this research is a 360° video presented using the YouTube platform and can be accessed easily by students using supporting electronic devices. The 360° video has gone through the feasibility test stage to media experts and material experts. The results of the product feasibility test by media experts with a percentage of 93.75% get the results of "Very Feasible", as well as by material experts with a percentage of 87.5% get the results of "Very Feasible".

PENGEMBANGAN MEDIA PEMBELAJARAN VIDEO INTERAKTIF UNTUK MENINGKATKAN HASIL BELAJAR SISWA

Conventional learning methods that are still applied by teachers experience several obstacles, including many students who cannot understand the material being taught. Students tend to be passive and do not respond to the material presented, this affects the learning outcomes of students who do not meet the minimum completeness criteria. The purpose of this study was to determine the development of interactive video learning media in improving student learning outcomes. The method used in this study is the research and development method or Research and Development (R & D). The model used in this study is the development of the 4-D (Four D) model. The results of this study indicate that the assessment of the feasibility of interactive video learning media by material experts is very valid with a percentage of 93%, and the results of the feasibility of interactive video language based on learning aspects have been valid with a percentage of 90%. The results of the feasibility of interactive video media based on material editing aspects have been valid with a percentage of 83%. The response of students to the interactive learning video individual test was 80.35% (practical) while in the field test it reached 93.68% (very practical) while student learning outcomes based on validation reached 85.77%. The effectiveness of interactive learning videos is marked by student learning completion with an average of 90%. From this, it can be concluded that interactive learning videos can improve student learning outcomes.

Pengembangan Media Pembelajaran Go Puzzle Pada Mata Pelajaran Pendidikan Pancasila dan Kewarganegaraan untuk Siswa Sekolah Menengah Pertama

This study aims to develop and test the validity, attractiveness, effectiveness, and applicability of Go Puzzle learning media in the subjects of Pancasila and Civic Education. The procedure used is research and development based on the steps proposed by Borg and Gall. The products produced in this development study are Go Puzzle learning media material for the Formulation and Determination of Pancasila as a State Basis that is valid, interesting, effective, and can be applied in learning. The product validity test is based on the results of material expert validation of 92.78 percent, media expert validation of 91.42 percent, expert validation of learning implementation plans of 95.63 percent, and field learning expert validation of 98.21 percent. The product attractiveness test is based on the results of small group trials of 90.36 percent and the results of large group trials of 93.46 percent. The product effectiveness test is based on the results of large group trials which resulted in an average completeness of students’ scores when pretest was 20.89 percent and post test was 86.89. This shows that there is an increase in the percentage of completeness of scores obtained by students, which is 66 percent. The product applicability test is based on the educator response questionnaire, which is 96.88% which shows that the product developed can be applied in learning. Abstrak: Kajian ini bertujuan untuk mengembangk

Development of circulatory system mobile learning (CSML) for grade XI students

The utilization of communication devices such as mobile phones as a learning support tool in the development of technology 4.0 is still low. The low mobile phone utilization as a learning support tool causes the variety of learning media used by teachers to be low. The low variety of learning media results in students having difficulty mastering the concept of learning material, especially circulatory system material in class XI. The difficulty of concept mastery on circulatory system material can be overcome through the development of circulatory system mobile learning (CSML). The research objectives are: 1) Develop CSML on circulatory system material in grade XI, 2) Test the feasibility of CSML, and 3) Know the response of teachers and students to CSML. The type of research is Research and Development (R&D) using the ADDIE model (Analysis, Design, Development, Implementation, and Evaluation). Data collection uses feasibility validation questionnaires and response questionnaires. The data analyzed were the results of the feasibility assessment from media experts and material experts, and the results of responses from teachers and students. Data analysis was carried out quantitatively descriptive using a Likert scale of 1-4. The results of the study are 1) The result of developing CSML can be accessed online; 2) The results of the feasibility assessment from media experts were 82.27% and material experts were 89.59% with a very feasible category; 3) The results of teacher responses were 87.02% and student responses were 88.55% with a great category.

Design an Electrical Power Practical Module in the Introductory Electrical Energy Course

The introductory electrical energy course is one of the courses that applies learning using practical methods. In the introductory electrical energy course, there is material about electrical power. Based on observations, it is known that students need more learning media in the form of modules in the electrical power practicum, which causes a lack of interest and low understanding of student learning. Based on these problems, a learning medium in the form of a practicum module was developed to complement practicum learning and is expected to increase students' interest in and understanding of learning. The electrical power practicum module was developed using research and development methods. The researcher's research instrument was a media expert and material expert validation sheet to test the feasibility of the practicum module to be applied in the Electrical Power Practicum. The validation results of media and material experts prove that the electrical power practicum module is very feasible regarding media and material. Based on the percentage of scores obtained from media experts, namely 81.66%, material experts obtained a score of 88.57%, which is included in the very suitable category to be applied in the Basic Electrical Energy course.

Trainer Kit Module for DC Motor Speed Control Using Voice Commands Based on Arduino

Based on the results of observations made by researchers through direct observation of lecturers in the field of electricity, Electrical Engineering Education Study Program, it was found that there is a need for additional trainers as learning media in the electrical machine control course. This study aims to find out how to design a trainer kit design module for DC motor speed control using voice commands by utilizing the Arduino microcontroller. We also learned the results of testing the design of a trainer kit design module for DC motor speed control using voice commands by utilizing the Arduino microcontroller. The research method researchers use is the Research and Development (R&D) method, which aims to develop new products or innovations that benefit. Based on the results of expert validation, it can be concluded that the Arduino Microcontroller-Based Trainer Kit Practical Module obtained a high percentage of media experts at 96%, material experts at 95.5%, and language experts at 80%. These results indicate that this module gets the "Very Eligible" category to be applied to the Electrical Machine Control course.

Augmented Reality-Based Learning Media in Computer Systems Subjects

This research aims to develop Augmented Reality (AR)-based learning media in the Computer Systems subject at SMK Negeri 2 Argamakmur, with the hope of increasing the effectiveness and involvement of students in the learning process. This study uses the Research method and Development (RD) with the ADDIE (Analysis, Design, Development, Implementation, and Evaluation) development model. The subjects of the study consisted of 30 grade XI students at SMK Negeri 2 Argamakmur. Data collection instruments included questionnaires to measure student and teacher responses, and tests to assess the increase in conceptual understanding. The media feasibility test was carried out through validation by material experts and media experts, as well as limited trials. The results showed that AR-based learning media received a "very feasible" rating from material experts with a score of 88.5% and from media experts with a score of 91.2%. Testing the effectiveness of the media on student understanding showed an increase in learning outcomes with an average pre-test score of 65.3 increasing to 82.7 in the post-test, with a rise of 26.5%. Student responses to this learning media were also very positive, with a percentage of satisfaction reaching 89.4%. Based on these results, it can be concluded that the AR-based learning media developed effectively improves student understanding and can be used as a learning medium in the computer systems subjects.

Pengembangan Media Video Animasi Pembelajaran Berbasis Pendekatan Inkuiri pada Mata Pelajaran Bahasa Inggris Kelas VIII SMP

The development of learning video media is carried out as an effort to solve student learning problems. This Learning Media can be used as an alternative to reduce problems in learning. This study aims to produce products in English class VIII subjects and determine the quality of validity and practicality of the products developed so that they are feasible to use. This study is a type of Research and Development (R&D) development or by using a 4-D development model (four-D model). This Model consists of 4 stages of development include Define, Design, Develop, Disseminate. The product validity test was conducted by 3 validators, namely 2 media validators and 1 material validator. Practicalities test was conducted on 31 students of Class VIII SMP Negeri 1 Junjung Sirih. The results of this study explain that the average percentage of media validators I and II respectively is 97.5% and 96.25% with the category of "Very Valid". From the assessment of material experts, an average percentage of 94.54% was obtained with the category of "Very Valid". For the assessment of practicality from students, a percentage of 93.22% was obtained with the product category "Very Practical" Based on these calculations, it can be concluded that the learning animation video media based on the inquiry approach in English subjects developed "Very Feasible" is used in learning

Development of Interactive Learning Media Using Android-based Google Sites to Increase Students' Interest in Learning

In this study, researchers found a problem: there is still a lack of student interest in learning mathematics due to the media provided, which is less innovative and interactive, so students feel bored. Therefore, this research aims to (1) develop interactive learning media using Google Sites based on Android to increase student learning interest in Flat Buildings material grade VII SMP / MTs, (2) test the feasibility of the media, and (3) increase student learning interest. The research method used is Research and Development (R&D) with the 4-D development model (Define, Design, Development, Disseminate). The instruments used were expert validation, student response, learning interest, and pretest-posttest questionnaires. The results of this study obtained an average value from media experts of 92% with a very feasible category, while material experts obtained an average of 84% with a feasible category. The results of the N-Gain test obtained an average value of 82%, and the results of the student interest questionnaire of 76.62%. These results show that Android-based Google Sites learning media effectively increases student interest in learning. It can be concluded that interactive learning media using Android-based Google Sites is feasible and effective in increasing student interest in learning.

PENGEMBANGAN MICROLEARNING VIDEO 360° PADA FENOMENA EFEK FOTOLISTRIK

This research aims to develop a 360° microlearning video in a modern physics course on the phenomenon of the photoelectric effect. The research uses the R&D method with the ASSURE development model which consists of (1) Analyze Learners, (2) State Standars and Objectives, (3) Select Methods, Media and Materials, (4) Utilize Technology, Media, and Materials, (5) Require Learner Participation, (6) Evaluate and Revise. However, in this study, it was carried out only up to the Utilize Technology, Media, and Materials stage. Data collection was carried out using instruments in the form of a questionnaire of initial abilities, student characteristics, interviews, and documentation to students of physics education and physics study programs at the State University of Jakarta. The results of this development research were carried out product feasibility testing by experts, namely media experts obtained a percentage achievement of 87.5% with a very feasible interpretation and material experts obtained a percentage achievement of 93.8% with a very feasible interpretation. The results of the feasibility test by experts show that the 360° video microlearning developed is very feasible to be tested on students. The final product of this research is a 360° video as a medium in accordance with the predetermined learning design. This product is published through the YouTube platform to be easily accessed by students.

Pengembangan Media Ajar Interaktif Berbantuan Microsoft Powerpoint Menggunakan Add-In Classpoint Pada Mata Pelajaran Komputer Akuntansi Kelas XI AKL

This development research aims to produce an interactive teaching media product assisted by Microsoft Powerpoint using the Classpoint add-in in the Accounting Computer subject class XI AKL. Another goal is to find out the process of developing teaching media, the feasibility of teaching media, and the response of students to the developed teaching media. This study uses a type of R&D (Research and Development) research with the ADDIE development model which consists of 5 stages, namely Analyse, Design, Develop, Implement, and Evaluate. The test subjects of this study are grade XI AKL students from SMK YPM 11 Wonoayu. The results of this study show the results of the material expert test by the Lecturer of the Faculty of Economics and Business and the Teacher of the Accounting Computer subject of SMK YPM 11 Wonoayu which is said to be very feasible with an average percentage of 88.13%, while the results of the media expert test by the Lecturer of the Faculty of Economics and Business are said to be very feasible with an average presentation of 88.89%. The response from students of class XI AKL SMK YPM 11 Wonoayu to the interactive teaching media developed received an average of 97.99% which was included in the category of very understanding. From the average results of the above percentage, it can be said that interactive teaching media assisted by Microsoft Powerpoint using the Classpoint add-in in the Accounting Computer subject class XI AKL is very feasible and can be applied to learning in the classroom

Development of teaching materials with agricultural insight to introduce of agriculture in primary school students

Agriculture is one of the supports for national food needs, so it must continue to be preserved. Unfortunately, nowadays, the sustainability of agriculture is increasingly worrying. Many young people are no longer interested in becoming farmers or working in the agricultural sector. A solution like this must be immediately sought so that regeneration is maintained. This research aimed to develop teaching materials with agricultural insight to introduce of agriculture in primary school students in Indonesia. The research used the research and development (RD) method. Development was carried out using the Borg and Gall model, including: research and informing collecting, planning, preliminary development, and preliminary field testing and main product revision. The research results indicated that: i) the teaching material that was successfully developed was in the form of a textbook entitled “I love agriculture”. This book contains ten materials on agricultural, and ii) the test results showed that the agriculturaloriented teaching materials are of good quality. From the product eligibility test involving material experts and media experts, the average assessment score was 86.25%, while the average assessment score from students reached 85.25%. This research implied that students could get to know and love agriculture through learning activities at school.

E-modul IPS Kekayaan Budaya Indonesia Berbasis Karakter Toleransi dan Cinta Tanah Air Untuk Kelas IV Sekolah Dasar

This research is motivated by the limitations of teachers in utilizing technology to develop engaging and effective teaching materials, which impacts students' motivation and understanding of learning. The study aims to produce a valid, practical, and effective character-based IPS e-module. The research employs the ADDIE model, which includes analysis, design, development, implementation, and evaluation stages. Data collection involved validation instruments from material, language, and media experts, as well as practicality questionnaires for teachers, student response questionnaires, and pretest and posttest questions. Data analysis utilized both qualitative and quantitative techniques. Subjects included teachers and 20 fourth-grade students from a public elementary school in Malang Regency. Results showed validation scores of 92.3% from material experts, 95% from language experts, and 97.5% from media experts, all categorized as very valid. Teacher practicality was rated at 98%, and student responses at 92.5%, both deemed very practical. Effectiveness, measured by the n-gain test, scored 78.06, indicating effectiveness. These results indicate that the character-based IPS e-module provides engaging material, making it easier for students to understand the content, increasing motivation and learning outcomes, and fostering student character development. The e-module makes learning interactive, with students feeling enthusiastic and actively engaged. The character-based IPS e-module can be used as an innovative learning media by integrating character values, making learning more meaningful.

PENGEMBANGAN MEDIA PEMBELAJARAN VIDEO INTERAKTIF BERBASIS BUDAYA LOKAL UNTUK MENINGKATKAN HASIL BELAJAR MATA PELAJARAN IPAS MATERI ENERGI DALAM KEHIDUPAN SEHARI-HARI SISWA KELAS IV SD

This research aims to develop interactive video learning media based on local culture to improve the fourth grade of students learning outcomes, especially energy in everyday life thema. This is a research and development using the ADDIE method which is analysis, design, development, implementation, and evaluation. The research subjects involved 110 students from several elementary schools in Sintang. The data collected through expert validation, user responses, as well as various statistical tests such as validity, reliability and hypothesis testing. The research results showed that the media developed was considered very feasible by media experts (85.93%) and appropriate by material experts (75%). Student and teacher responses to this media were also good, with scores of 80.36% and 77% respectively in the wide-scale test. The increase in student learning outcomes can be seen from the pretest score of 28.81% and posttest 78.36%, so this media has proven to be effective in improving student learning outcomes.

Pengembangan Bahan Ajar E-Comic melalui Aplikasi Canva pada Mata Pelajaran IPAS di Sekolah Dasar

This research is motivated by the lack of variety of science teaching materials used by fifth-grade teachers and the minimal number of teaching materials, as well as the fact that there are still teachers who are not skilled in utilizing ICT in making teaching materials. This study aimed to determine the development process and feasibility of open materials based on E-Comic. The research method used is Research and Development (R&D) with the ADDIE model. The study results are 1) Development of E-Comic-based teaching materials using the ADDIE model through 5 stages: analysis, design, development, implementation, and evaluation. The process of developing teaching materials is carried out by analyzing student needs, characteristics, and curriculum, making plans such as storyboard design, material plans, and product design plans including character and cover designs using the AI-assisted Canva application. 2) The results of the feasibility test by media experts 1 and 2 scored 86% and 90% with the category "Feasible". The feasibility test results by material experts 1 and 2 scored 84% and 98% with the category "Feasible". The final stage was a field trial and then an evaluation was carried out with product revisions. Teacher response test, student responses in small and large groups scored 95%, 88%, and 87.2% with the category "Appropriate". It can be concluded that E-Comic-based teaching materials are appropriate for use in learning for students at school.

Development of Encyclopedia Based on Ethnogastronomy of Sambas Malay Porridge

Biology learning is essentially learning that always relates science to the environment and living things. Therefore, there is a need for learning media that contains local wisdom related to the surrounding environment. This study aims to determine the validity of the ethnogastronomy-based encyclopedia of Sambas Malay porridge and to determine student responses to the ethnogastronomy-based encyclopedia of Sambas Malay porridge. The research method used is R&D, in this study a 4-D development model is used, namely the define, design, development and disseminate stages, but in this development the researcher only reaches the development stage. This research was conducted on students of class X SMAN 1 Tekarang. The research instrument used was a questionnaire to obtain product validation and determine student responses to the developed product. Product validation was carried out by material experts, linguists, media experts, and student responses. The results showed that the encyclopedia developed was considered valid. The results of the material expert validator assessment were 93.81% (very valid), language experts were 86.67% (very valid), media experts were 95.00% (very valid). Student responses were obtained through 2 stages, namely small-scale trials of 72.58% (positive) and large-scale trials of 90.00% (very positive). Overall, it can be concluded that the encyclopedia developed is valid and gets a positive response from students.

Inverter Practical Module Design for Power Electronics Course in Electrical Engineering Education Study Program

Inverter material is one of the essential materials in power electronics courses. An inverter is an electronic device that converts direct current (DC) into alternating current (AC). This concept is the foundation of electronics. Because the power electronics course is a practicum course, a practicum module is required as an intermediary teaching medium; this practical module discusses 3-phase inverter material, which uses the pulse width modulation (PWM) and sinusoidal pulse width modulation inverter (SPWM) switching methods. Through Tinkercad software, the circuit is assembled, and the output wave results from the two methods used are seen in designing the 3-phase inverter practical module using the Research and Development method. This research uses media and material validation sheet instruments to determine the feasibility of the 3-phase inverter practicum module. The research results showed that the percentage of media experts was 94%, material experts were 81%, and language experts were 84%. Hence, the 3-phase inverter practicum module is very suitable for use and can make it easier for students to understand inverters. Thus, developing a 3-phase inverter practicum module can effectively increase students' understanding of inverter material and interest in learning. It can also be an alternative for lecturers in teaching.

Development of Canva-Based Science Infographic Learning Media to Improve Students’ Learning Outcomes

The aim of this research is to develop, test the feasibility, and effectiveness of Canva-based infographic learning media. This type of research and development (R&D) development research with the ADDIE development model, namely analysis, design, development, implementation, and evaluation). The research subjects were fourth grade students totaling 25 students, data collection techniques with observation, interviews, questionnaires, and documentation data. The results of media expert validation show a percentage value of 88.3% very feasible category, material experts with a percentage value of 86.66% very feasible category. Based on the pretest-posttest results, it is known that Canva-based infographic media is effective in improving student learning outcomes, which is indicated by an increase in the average pretest score from 52 to 80 on the posttest, with an N-Gain test result of 0.58 in the moderate category. Based on the response questionnaire distributed, a very positive response was obtained from teachers and students. From these results, it can be concluded that Canva-based infographic learning media is effective in improving student learning outcomes and is feasible and practical to use in IPAS learning on respiratory system material in grade V SD Negeri Tambakaji 05.

Development of Web-Based Interactive Learning Media on Excretory System Materials to Increase Learning Interest

Education today requires the utilization of increasingly sophisticated technology, which provides new effectiveness and innovation in learning. One of them is the development of interactive learning media to optimize classroom learning, which aims to increase interest in learning and can make it easier for students to understand learning materials. This media development uses research and development (R&D) with the development model ADDIE. The data collection technique uses a questionnaire, which is divided into a feasibility questionnaire (for media experts and material experts), a practicality (for biology teachers and student responses), and a learning interest questionnaire. The results obtained from feasibility and practicality are very good criteria, and the results of learning interest show a much higher average value in the experimental class (79.21) than the control class (62.26). In general, it can be concluded that learning media are feasible, practical, and effective for increasing learning interest