Experimental Plant Research Articles

Screening of multi-metal tolerant plant growth promoting bacteria (PGPB) Stutzerimonas stutzeri WA4 and its assistance on phytoextraction of heavy metals (Cu, Ag and Pb)

In the current study, coal fly ash contaminated soil was collected in and around Mettur Thermal Power Station, Salem district, Tamil Nadu. The metal concentrations present in the coal fly ash soil samples were analyzed and also used for the isolation of bacteria. The isolates were screened for their multi-metal resistance against three heavy metals (Cu, Ag and Pb) and plant growth-promoting traits (siderophore, phosphate solubilization, IAA, cellulase, HCN, and ammonia production). Among the 12 isolates, the WA4 strain revealed promising results for both metal-resistant and plant growth-promoting activity. In the in vitro pot experiment, Spinacia oleracea (Palak), Red amaranth (Red spinach), Capsicum annum (Green chilly) and Solanum melongena (Brinjal) plants were grown in ash-contaminated soil treated with different concentrations of selected bacterial inoculum (25%, 50%, 75% and 100%) along with a control pot. The results of the study indicated that the ash-contaminated soil treated with bacterial inoculum distinctly increased the growth of plants when compared to untreated soil (control). Thus, the best-performing strain WA4 could be utilized as a good bio-stimulant for promoting the growth of selected plants in the re-vegetation programs of ash-contaminated soil.

Relationship Between Age and Condensed Tannin Content in the Bark of Two Forest Species Grown in Northeast Brazil

Objective: This research aimed to evaluate the influence of tree age on the condensed tannins content in the bark of two forest species. Theoretical Framework: Tannins are phenolic compounds present in various parts of plants and have consolidated applications in the market. This way, silvicultural studies of different species with the potential to produce are relevant. Method: Barks of Azadirachta indica at 5, 6, and 7 years and Mimosa caesalpiniaefolia at 6, 7, and 9 years were collected from an experimental plantation located in a forest area in Rio Grande do Norte, Brazil. The barks were then air-dried and ground to obtain a material subjected to extraction. Total solids content, Stiasny index, and condensed tannin content were determined from the hot-water extracts. Results and Discussion: The condensed tannins content in A. indica bark did not vary as tree age increased, while for M. caesalpiniaefolia, the most productive age was determined to be six years old. Research Implications: The experimental approach showed that A. indica presented stable tannin content in the bark regardless of age, allowing continuous and flexible management to produce these extractives. In contrast, M. caesalpiniifolia presented condensed tannins, with their reactivity decreasing with age, indicating that younger trees are more suitable for high-quality extractions and commercial production. Originality/Value: Tannins content in Azadirachta indica bark remains stable over time, facilitating continuous management and Mimosa caesalpiniifolia bark, the concentration of tannins is higher in younger trees.

A Novel Single Base Mutation in OsSPL42 Leads to the Formation of Leaf Lesions in Rice

Rice spotted-leaf mutants serve as valuable resources for studying plant programmed cell death (PCD) and disease resistance mechanisms, making them crucial for research on disease resistance in rice. Map-based cloning was used to identify and clone the spotted-leaf gene OsSPL42. Then, functional complementation and CRISPR/Cas9 techniques were also employed to further validate the function of this gene. By applying leaf clippings for bacterial blight (BB) inoculation, the BB resistance of different rice lines was assessed. The results in this study were as follows: The OsSPL42 behaved as a recessive nuclear gene and was narrowed down to a 111 kb region on chromosome 8. All T0 transgenic rice plants in the complementation experiments exhibited a wild-type phenotype, without any lesion spots on the rice leaves. This suggests that the LOC_Os08g06100 encoding O-methyltransferase is the candidate gene for the mutant spl42. The OsSpl42 is widely expressed and the OsSPL42-GFP protein is mainly localized in the cytoplasm. OsSPL42 overexpression lines are more susceptible to BBs, which indicates that OsSPL42 may act as a negative regulator of rice resistance to BB. In summary, we speculate that OsSPL42 plays an important role in the regulation of pathogen response, providing new insights into plant defense mechanisms.

Investigation of neutron irradiated W/CuCrZr joints

This study investigates the effects of neutron irradiation on tungsten (W) and copper-chromium-zirconium (CuCrZr) joints under conditions mimicking the high neutron flux environment of a tokamak fusion reactor. Samples of W/CuCrZr joints were subjected to irradiation in the Belgian Reactor 2 (BR2) nuclear reactor at SCK CEN (Belgian Nuclear Research Centre) to simulate the intense neutron exposure characteristic for International Thermonuclear Experimental Reactor (ITER) and DEMOnstration power plant reactor (DEMO) operations. The primary objective was to evaluate changes in the mechanical properties and microstructure of these materials, which are critical for their potential use in plasma-facing components.It is revealed that a significant reduction in tensile elongation of the joint, indicating some degree of embrittlement, is observed after the irradiation. Importantly, this effect is independent of the irradiation temperature. Possible physical reasons for the observed phenomenon are discussed.

Теплоотдача при движении воды в трубе при температурах, близких к температурам кипения в переходном режиме

Currently, there is a problem of developing effective methods to calculate heat and mass transfer processes during steam condensation from a vapor-gas mixture in industrial devices. This is due to the need to create new reliable and highly efficient designs of heat exchangers for various purposes. The finite element method has been used in the ANSYS Fluent software package during the numerical simulation. An experimental plant is tested in the pipeline of an industrial enterprise at the production site of the Technopolis KHIMGRAD industrial park (Kazan-city). The applicability of the Lee model to solve problems of water flow in a pipeline with partial evaporation is proved. This model allows you to accurately account for the processes of evaporation and condensation, which is important for the design of cooling and air conditioning systems. The authors have designed a three-dimensional model of the flow area of the experimental module and a CFD model to calculate temperatures, phase velocities and their concentrations, considering the peculiarities of the ongoing processes of heat and mass transfer. A slight effect on the heat flow of a 180° rotation during the flow of a liquid medium in the range of the Reynolds numbers 1800–2600 is shown. The developed model is verified with the results obtained at the experimental plant. It is established that the model reproduces experimental data well. An analysis of studies of heat and mass transfer processes during the fluid flow in channels in the presence of phase transitions is carried out. The problems of calculating the parameters of heat transfer during the movement of a fluid in a transient mode are revealed, especially at values of the Reynolds number close to 2000. The experimental plant diagram is presented. It is found that in the range of Reynolds numbers of 2600–3600, the calculated temperature values differ from the temperature values obtained experimentally by less than 0,42 %. During the partial transition of water into steam in the range of Reynolds numbers of 1800–2600, the deviations were less than 6 %, which confirms the adequacy of numerical modeling of calculating the heat transfer process in a pipe. It is shown that considering the influence of temperature on surface tension, the coefficient of thermal conductivity of water and the coefficient of dynamic viscosity of water is important to obtain accurate results. The proposed approach can be used to optimize the operating parameters of condensers and evaporators, as well as to accurately calculate the heat transfer coefficient and determine the areas of vapor formation. It will improve the energy efficiency of industrial installations and reduce the cost of equipment operation.

Soil Biocrusts May Exert a Legacy Impact on the Rhizosphere Microbial Community of Plant Crops

Biological soil crusts (biocrusts) play important ecological roles in many ecosystems, but their legacy effects in subtropical agricultural systems are poorly understood. This study investigated how biocrusts impact soil properties and subsequent crop rhizosphere microbiomes. Soil with (+BC) and without (−BC) biocrusts was cultivated and used to grow pepper plants in a greenhouse experiment. Soil physicochemical properties and microbial communities in the pre-planting soils, and microbial communities in crop rhizosphere were analyzed. The results showed that soils with biocrust had significantly higher organic matter, total nitrogen, alkaline hydrolyzable nitrogen, total phosphorus, and total potassium content. Microbial community structures differed significantly among treatments, with −BC soils exhibiting higher microbial diversity in pre-planting conditions, while +BC soils showed higher diversity in crop rhizosphere soils. Soil properties, especially extractable potassium, total nitrogen, and organic matter content, were significantly correlated with rhizosphere microbial community structure. Additionally, our results showed that the first principal coordinate (PCoA1) of soil microbial community structure was significantly correlated with rhizosphere microbiota. Multiple regression analysis revealed that pre-planting soil microbial diversity indices and certain soil physicochemical properties could predict crop rhizosphere soil microbial diversity. Our results demonstrate that biocrusts can enhance soil fertility and alter microbial communities in subtropical agricultural soils, with persistent effects on the crop rhizosphere microbiome. This study provides new insights into the ecological legacy of biocrusts in managed subtropical ecosystems and their potential agricultural implications.

Evaluating the Antihyperglycemic Effects of Elnabk Fruit Powder in Hyperglycemic Rats

Diabetes is a major public health concern that leads to significant illness, death, and long-term effects. The research involved twenty-four (24) Sprague-Dawley male albino rats, with an average weight of 150 ± 10 g. The researchers fed the rats a basic diet for one week prior to the research. The researchers then separated the rats into four groups, each containing six rats. The control group consisted of normal rats without any experimental manipulation (C–ve). The initial group, referred to as the -ve control group, comprised healthy rats who received only the basal diet for a period of twenty-eight days. The remaining rats (n = 18) with diabetes received Alloxan at a dosage of 150 mg/kg. The second group, known as the positive control group, involved diabetic rats who did not receive any food from the experimental plant. We injected alloxan into the other two experimental groups, and fed each group a basic meal of elnabk fruit at concentrations ranging from 5% to 10%. Elnabk fruit powder for 28 days. We took a blood sample at the end of the experiment, removed the organs, & subjected them to biochemical analysis. The consequences demonstrated that group 4 ( rats with diabetes fed on ten percent elnabk fruit powder) had the best serum (HDL c) when in contrast to the control positive group.

First report of Sclerotinia minor causing soft rot of Scabiosa atropurpurea in California.

In May of 2019, Scabiosa atropurpurea samples with brown discoloration, soft rot of the crown and lower stem, with presence of white mycelium and black sclerotia (Supp. Fig. 1A, B) were collected from a 0.10 ha open field diversified cut flower production in San Luis Obispo County, CA. Approximately 30 to 40% of the scabiosa crop planted in a quarter of the field, exhibited symptoms. Symptomatic crowns and lower stems from five plants were surface disinfested by rinsing in 0.1% Tween 20, soaking in 70% ethanol for 30 s, 1% sodium hypochlorite for 2 min and sterile water. Disinfested tissue was placed in 1/10 potato dextrose agar (PDA) and incubated at 20°C (12 h photoperiod). Resulting colonies (n = 5) formed abundant white mycelia, with black sclerotia formed on the outer edge of the plates after two weeks (Suppl. Fig. 1C). Sclerotia (n = 50) had an average size of 1.6 (± 0.19) mm in diameter. Morphological identification resulted in Sclerotinia sp. (Hao et al., 2003). The pathogen was further identified by DNA extraction of two hyphal tipped isolates, followed by amplification and sequencing of the rDNA internal transcribed spacer (ITS) region, ITS1/ITS4 (White et al. 1990), calmodulin (CaM), CAL-228F/CAL-737R (Carbone and Kohn, 1999), and DNA replication licensing factor Mcm7 Mcm7-709for/Mcm7-1348rev (Schmitt et al., 2009). NCBI BLAST searches with consensus sequences for each maker revealed 99 to 100% identity with S. minor ex-types for all loci (Supp. Table 1). A maximum parsimony multilocus phylogenetic analysis clustered Californian isolates with reference strains of S. minor (Supp. Fig. 1F). Sequences were deposited in GenBank (Supp. Table 1). Pathogenicity tests were conducted with isolate CS435, which was transferred onto PDA plates and incubated at 20°C for one week. Inoculum consisted of CS435 infested PDA plugs (1 cm3). In the greenhouse, the experiment was set as a complete randomized design and observed for six weeks. Fourteen-week-old scabiosa 'Merlot Red' grown in 3.78 L pots (n = 6), were inoculated by wounding plants at 0.5 cm above the crowns with a 1 mm probe. Inoculum was placed directly on top of the wound and was secured with parafilm. Negative control plants (n = 6) were wounded as above and inoculated with PDA plugs. In experiment 1(19.4 (± 3) °C, RH 46.9), 83% of plants exhibited yellowing of the lower leaves and wilting at one week post inoculation (wpi). Symptoms progressed over time until wilting, major leaf and stem necrosis, was observed in all inoculated plants (Supp. Fig 1E, D). Plant mortality incidence at five wpi was 83%. Pathogen signs including white mycelia and black sclerotia were also observed. In experiment 2 (20.0 (± 10) °C, RH 39.6), 66% of the total plants were symptomatic at five wpi: 33% exhibited yellowing of the lower leaves and wilting, and 33% of plants died. Disease did not develop in non-inoculated plants in either experiment. S. minor was successfully reisolated from surface disinfested tissue of at least 50% (Exp. 1) and 100% (Exp. 2) of inoculated plants, yielding identical sequences to those of the inoculated isolate. S. minor is a soil-borne pathogen that infects tomato, lettuce, brassica, and sunflower crops in California. This study stablishes S. minor as a new soil-borne pathogen of Scabiosa in California. Soil-borne pathogens are a recurrent issue in the cut flower industry, characterizing new pathogens in these crops can inform crop advisors and disease diagnostician to improve disease management in the ornamental industry.

First report of lily mottle virus naturally infecting lily (Lilium asiatica) in Texas, USA.

Lily (Lilium asiatica) is an important plant grown for its range of flower colors and heavy scent. In March 2024, potyvirus-like symptoms consisting of light-yellow mottling and mosaic were noticed on 12/20 lily plants in a private property in Weslaco, Hidalgo County, Texas. Two symptomatic plants (WTX1 and WTX2) were sampled randomly for virus diagnosis. The leaf extracts of both samples were negative for the potyvirus group using Agdia's Poty ImmunoStrip® (Agdia, Inc., Elkhart, IN, USA). However, rub-inoculation of the extracts onto healthy Nicotiana benthamiana and Vigna unguiculata plants (n=4, each) induced mild mottle symptoms on the systemic leaves of both herbaceous test plants 20 to 28 days post inoculation, indicating the presence of a mechanically transmissible agent in the samples. No virus-like symptoms were observed on the mock-inoculated plants (n=1, each) of both species. To test for suspected potyvirus infection, 2-µg of total nucleic acid extracts (Dellaporta et al. 1983) from WTX1 and WTX2 were used for complimentary DNA (cDNA) synthesis with Oligo(dT) primer and the PrimeScript 1st strand cDNA synthesis kit (Takara Bio, USA). One microliter aliquot of each cDNA served as template in 12.5-µl conventional PCR reaction volumes with 5 U Taq polymerase (Roche Diagnostics, Indianapolis, IN), and two pairs of degenerate primers targeting the partial cylindrical inclusion (CI) gene and the helper component protease (HC-Pro) of potyviruses (Ha et al. 2008). The expected ~700-bp DNA product of each gene target was amplified from both samples. The amplicons were excised, gel eluted (Zymoclean™ Gel DNA Recovery kit) and cloned individually into the pJET1.2/Blunt vector (Life Technologies). Recombinant plasmids from two transformed Escherichia coli cells per cloned DNA insert were Sanger sequenced. BLASTn analysis of each gene-specific nucleotide (nt) sequence fragment revealed their identities (83 to 92 % nt) as lily mottle virus (LMoV; genus Potyvirus) at 93 to 98% query coverage. In pairwise comparison, the obtained sequences of LMoV isolates from TX specific to the CI (GenBank accession nos. PQ037260-61) and the HC-Pro (PQ037262-63) shared ~99% nt and 100% amino acid (aa) identities with each other and ~91-92% nt and 98-100% aa identities with the closest isolate, Bate5 (JN127341) from Australia. Based on these results, a pair of LMoV-specific primers (LM_v109-F: 5'-GGCCAGTAATGTGCACAAGC-3' and LM_c527-R: 5'-TCGCTGTAGCTAGCGACGTAC-3') was newly designed to target the partial CI gene, internal to the 700-bp fragment obtained above with the generic primers. The primer pair was used to screen each of the mechanically inoculated test plants by RT-PCR as previously described above. The expected 438-bp fragment of the LMoV CI gene was amplified from all the inoculated plants of both N. benthamiana and V. unguiculata; the results were confirmed by Sanger sequencing as described above. The mock-inoculated plant of each experimental host plant tested negative for LMoV. LMoV is a quarantine pest and was previously reported in the U.S. (Brierley and Smith, 1944) and other lily-producing parts of the world, such as the Netherlands, China, Korea, and Brazil. To our knowledge, this is the first confirmed report of the virus in Texas, thus expanding its geographical range. Testing of lily foundation stocks before propagation is essential to prevent further spread of LMoV via planting material.

Remediation of atrazine contaminated soil with the help of hydrothermal carbon/diatomite composite inoculated with degrading microorganisms

Atrazine (ATZ) is a potent herbicide for annual broadleaf weeds, but it remains in the soil for a long time, causing serious phytotoxicity to subsequent crops, especially in maize fields. In this study, hydrothermal carbon was prepared from waste mushroom substrate and mixed with diatomite to serve as a microbial medium for culturing Arthrobacter sp. NJ-1, aiming to synergistically remediate ATZ-contaminated soil. When the ratio of hydrothermal carbon to diatomite was 3:2, the removal efficiency of ATZ in aqueous solution was the best-up to 81.67 %. The growth analysis of NJ-1 under different treatments revealed that the concentration of NJ-1 cultured with hydrothermal carbon/diatomite composite (MHS) was significantly higher than that of other combinations. Moreover, the application of MHS in conjunction with Arthrobacter sp. NJ-1 in ATZ-contaminated soil resulted in the removal of 92.52 % of ATZ residues. Additionally, this treatment significantly improved the physicochemical properties of the soil and enhanced soil fertility. The results of pot experiments showed that, compared to the control group plants significantly affected by ATZ pollution, the growth status of the experimental group plants improved after treatment with MHS synergistic Arthrobacter sp. NJ-1 system. These findings provide effective technical support and a theoretical basis for the remediation of ATZ-contaminated soil.

Simulation algorithm of greenhouse soil water movement based on cellular automata

Soil moisture movement reveals the hydrological environment and irrigation characteristics of plants, which is very important and basic hydrological problem. A soil moisture movement algorithm based on cellular automata suitable for greenhouse was proposed to simulate the lateral flow and vertical penetration of soil water in different soil layers. Artemisia annua was used as an experimental plant, and two numerical simulations were set up to determine the minimum water replenishment and the degree of upward soil modification. To verify the performance of the model, corn was used as an experimental plant for application simulation. The numerical simulation results show that the effect of only water for plant cells is superior to soil cells, and the disturbance behavior of the underlying soil layer should be minimized during the cultivation process. The average MAE/RMSE of all soil layers is 0.86/1.06 and in deep layer (50 cm and 60 cm) is 0.53/0.64. It shows the model has a certain prediction and simulation ability, especially in deep soil layers. The proposed algorithm can simply calculate soil flow, set the minimum water replenishment, and evaluate the water replenishment efficiency, which can provide a theoretical reference for the water replenishment and soil replacement scheme.

Unravelling the antianxiety activity of various fractions of aerial parts of Salvia moorcroftiana Wall. Ex Benth., by in vivo implicated through computational studies

There has been increasing interest in biologically active plant extracts. Studies continue to discover novel components, especially those with anti-anxiety activities. The present study investigates the anxiolytic activity of Salvia moorcroftiana Wall. ex Benth. aerial parts through both in vivo and in silico studies. Aerial parts of the experimental plant were extracted using a hydroalcoholic solvent and fractionated with various organic solvents of differing polarities, including hexane, dichloromethane, ethyl acetate, and n-butanol. The chemical compositions were determined using gas chromatography-mass spectrometry (GC/MS). In vivo anti-anxiety activity was tested on various Swiss albino mice models. Results indicate that all fractions of S. moorcroftiana exhibited significant anxiolytic effects, with the butanol fraction displaying the highest efficacy. Molecular docking analysis suggested that some of the compounds could target anxiety disorder proteins. ADME/T calculations were performed to examine the effects of S. moorcroftiana extracts on human metabolism. Therefore, the present study establishes the significant anti-anxiety activity of S. moorcroftiana aerial parts, suggesting its potential as a therapeutic agent for various anxiety disorders.

Root puppet masters: Infauna shift trait-productivity relationships in submerged aquatic vegetation communities.

Submerged aquatic vegetation (SAV) growth can be limited by light and nutrient availability. Infauna are common inhabitants of SAV meadows. Their activity increases nutrient mobility, and they can positively affect plant growth, but we do not know their role in plant trait-biomass production relationships. We approached this problem using a 15-week insitu transplant experiment in the Baltic Sea with experimental additions of Macoma balthica, a sedentary bivalve, to experimental SAV communities. Experimental plant communities were tricultures with varying species composition, compiled from a pool of six different species, to create an experimental gradient of trait community weighted means that allowed us to detect changes more clearly in plant trait-biomass production relationships in response to the M. balthica treatment. We evaluated the relationships between plant height, leaf area, maximum root length (MMRL), specific root length (SRL), and SAV biomass production, then compared M. balthica condition index (soft tissue biomass [WW, mg]/valve length [mm]) to plant community leaf tissue nutrient concentrations (N (%DW), δ15N). Community biomass production was significantly related to plant height in the control treatment, but this relationship was decoupled in the M. balthica treatment, where community biomass production was instead significantly related to MMRL and SRL. This suggested a shift in the predominant SAV growth strategy, from height-related to root-related community biomass production. Leaf tissue δ15N was significantly related to M. balthica condition index. The growth of one species, Potamogeton perfoliatus, was significantly inhibited by the M. balthica treatment. Our results show that infauna have an important role in the plant traits related to community biomass production, and they have the potential to shape plant community structure via selective influences on different plant species.

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure

The use of thin-walled constructions with honeycomb structure manufactured using additive technologies has several advantages compared to the constructions manufactured using traditional technologies. First of all, this is explained by the fact that additive technologies greatly simplify the production of honeycomb structures. A technology for manufacturing a three-layer composite plate with a honeycomb structure obtained using additive technologies is proposed in the paper. PLA plastic was chosen as the material for the honeycomb structure production. Printing was carried out using a "Delta" printer with parallel kinematic chains using FDM technologies. The printing temperature was 215 °C, table temperature – 60 °C. A fundamentally new scheme of an experimental plant for studying the bending of a three-layer plate is proposed. The aim of the research is to conduct tests of samples of a three-layer honeycomb panel for static bending when one edge of the sample is rigidly pinched. For the tests, a certified TiraTest 2300 universal testing machine (UTM), which allows to perform tensile and compression tests at a given traverse speed and measure the load with a relative error of 1%, was used. The UTM allows to load the sample and measure the load and displacement of the traverse. A sixteen-channel strain gauge station is used to measure the surface deformations of the housings. Transverse displacements of a three-layer plate were obtained as experimental data. The bending of the three-layer plate is modeled in the commercial package ANSYS. The results of experimental and numerical analysis coincide well.

V2 Protein Enhances the Replication of Genomic DNA of Mulberry Crinkle Leaf Virus.

Mulberry crinkle leaf virus (MCLV), identified in mulberry plants (Morus alba L.), is a member of the genus Mulcrilevirus in the family Geminiviridae. The functions of the V2 protein encoded by MCLV remain unclear. Here, Agrobacterium-mediated infectious clones of a wild-type MCLV vII (MCLVWT) and two V2 mutant MCLV vIIs, including MCLVmV2 (with a mutation of the start codon of the V2 ORF) and MCLVdV2 (5'-end partial deletion of the V2 ORF sequence), were constructed to investigate the roles of V2 both in planta and at the cellular level. Although all three constructs (pCA-1.1MCLVWT, pCA-MCLVmV2, and pCA-MCLVdV2) were able to infect both natural host mulberry plants and experimental tomato plants systematically, the replication of the MCLVmV2 and MCLVdV2 genomes in these hosts was significantly reduced compared to that of MCLVWT. Similarly, the accumulation of MCLVmV2 and MCLVdV2 in protoplasts of Nicotiana benthamiana plants was significantly lower than that of MCLVWT either 24 h or 48 h post-transfection. A complementation experiment further confirmed that the decreased accumulation of MCLV in the protoplasts was due to the absence of V2 expression. These results revealed that MCLV-encoded V2 greatly enhances the level of MCLV DNA accumulation and is designated the replication enhancer protein of MCLV.

Growth of shoots, ear and yield structure of winter wheat under drought

Aim. The aim of the work was to study the growth of shoots, ears and the structure of the yield of bread winter wheat (Triticum aestivum L.) under drought. Methods. Wheat plants cultivars Chigyrynka and Jamala were grown under optimal conditions until the earing-flowering phase, after that the experimental plants were transferred to drought regime for 8 days. Optimal water supply was restored to the end of vegetation. During the experiment, shoot growth and ear weight were measured during the experiment. Ripened plants were analyzed the yield structure. Results. It was established that the water deficit in the soil during the critical phase of the ontogeny of earing-flowering delayed the growth of shoots, decreased the weight of the ear grain productivity in both cultivars of plants. Restoration of irrigation stimulated growth of shoots and ears, but did not compensate for the loss of yield. Conclusions. Water deficit in soil in critical earing-flowering phase decreased shoots length, ears weight and productivity of winter wheat plants.

Environmental Limitations of the Use of Solar Energy in the Carpathian Region

Abstract. The purpose of the work is to study the environmental limitations of using solar energy in the Carpathian region of Ukraine. Problem. A number of main restrictions affecting the location of solar power plants are highlighted, which are analyzed in the process of carrying out a strategic environmental assessment and are substantiated by calculation in the process of the environmental impact assessment procedure. For solar power plant projects, the main environmental limitation is the use of land areas. In the Carpathian region, plots under solar power plants must bypass agricultural land, recreational and touristic use, buffer zones of nature reserves. An important technical limitation is the ability to connect solar power plants to electrical networks. Methodology. In the course of the research, the regression analysis of the dependence of the amount of electricity produced by the experimental solar power plant at the Ivano-Frankivsk National Technical University of Oil and Gas on meteorological parameters was further developed using statistical processing of a series of observations. Results. Originality. It was determined that the air temperature has the greatest influence on the production of electrical energy with a correlation coefficient of 0.919. A direct linear relationship indicates an increase in power generation with an increase in air temperature up to +250C. Relative humidity has a fairly significant effect on the generation of solar energy. The resulting correlation coefficient of 0.776 indicates a close relationship between the two data series. When the humidity increases to 76%, the production of electricity by solar photovoltaic panels increases and decreases with a further increase in humidity from 75 to 100 %, which is associated with an increase in cloudiness under such weather conditions. Wind speed also has a strong correlation with solar power generation. Electricity production increases in conditions of low wind or almost windless weather with a wind speed value of up to 2.9 m/s and decreases with a further increase in wind speed. Practical value. The obtained significant regularities will be of practical importance for the justification of environmental restrictions when using solar energy for the conditions of the city of Ivano-Frankivsk.

Zinc amendment as an effective tool in the management of cadmium toxicity: a case study with Amaranthus cruentus L

The unmanaged waste disposal, coupled with the increased industrialization and urbanization, has aggravated the problem of heavy metal contamination in the environment, especially in the agricultural soils. In view of this, the present study was planned to evaluate the effectiveness of zinc (Zn) in the amelioration of cadmium (Cd) toxicity in plants, thereby sustaining the crop productivity in near future. The experiment was performed in two parts. The first part focused on calculating the EC50 (half-effective concentration) of Cd, for which the potted experimental plants (Amaranthus cruentus L.) were treated with different doses of Cd (10, 20, 30, 40, and 50 mgL−1). In the second part, the EC50 Cd dose was combined with different Zn doses (100, 200, 300, 400, and 500 mgL−1) and the effect of Zn supplementation on Cd exposed plants was studied by evaluating the response of different biochemical, physiological and yield parameters. The EC50 Cd dose was calculated to be 26.5 mgL−1. Plant yield increased significantly with reduced Zn dosages. Biochemical parameters improved more than physiological parameters after Zn treatment in Cd-stressed plants. At higher Zn doses, its toxic effects exacerbate Cd toxicity. The study indicates that Zn partially decreases Cd toxicity in Amaranthus plants. The results suggest that 300 mgL−1 Zn dose was sufficient to bring about maximum recorded mitigation of Cd toxicity. However, since the synergistic effects of high doses of Zn with Cd cannot be ruled out, the selection of the applied Zn dose should be carefully selected.

Effects of Plant Growth Promoting Halotolerant Pseudomonas Aeruginosa JCM 5962 with Hydrocarbon Degradation Ability, Isolated from Sundarbans Mangrove Area in West Bengal, on Abelmoschus esculentus (Okra) Plant Growth

Plant growth promoting rhizobacteria (PGPR) play a key role in sustainable agricultural practices leading to increased crop productivity. Moreover, PGPR with ability to diminish abiotic stresses like salinity and hydrocarbon contamination in soil, can be developed into potent biofertilizers with maximum ecological benefits. Sundarbans mangrove region in West Bengal, a natural reservoir of diverse microbiota is an important source of PGPR adapted to high salinity and other abiotic stresses like hydrocarbon contamination due to oil spillage and water transport systems, rendering the soil unsuitable for farming. In the present study, a potent PGPR has been isolated from rhizospheric soil of Matla riverbed in mangrove areas of Sundarbans, with simultaneous nitrogen fixing, phosphate solubilizing and plant hormone like indole acetic acid (IAA) producing properties as well as high salt tolerance and hydrocarbon bioremediation abilities. The strain has been identified as Pseudomonas aeruginosa JCM 5962 (NCBI Accession number MK544832.1) on the basis of 16S rRNA analysis. The isolated Pseudomonas aeruginosa strain showed atmospheric nitrogen fixation (3612 ± 2 mg N/ Kg of soil), highest phosphate solubilization index of 3.0 ± 0.06 and 37.14 µg/mL of IAA production. This potent strain also showed salt tolerance upto 7% in culture broth and an uptake of 18.72% of salt. Highest hydrocarbon degradation was shown by this strain in presence of diesel as the sole carbon source. The isolated Pseudomonas aeruginosa strain showed overall improvement in growth of Abelmoschus esculentus (Okra) plants in pot experiments in different conditions like absence of any abiotic stress, presence of 5% salt stress and presence of 1% diesel contaminant. These results indicate that Pseudomonas aeruginosa JCM 5962 can be developed as a potent biofertilizer to be used in agricultural lands of Sundarbans mangrove regions and other areas which are plagued by high salinity and increasing hydrocarbons, particularly petroleum contamination.

Varying Tolerance to Diesel Toxicity Revealed by Growth Response Evaluation of Petunia grandiflora Shoot Lines Regenerated after Diesel Fuel Treatment

Continuous efforts are required to find ways to protect crop production against the toxicity of petroleum hydrocarbons, such as diesel, and contamination of soils. There is a need for identification of candidate plants that are tolerant to diesel toxicity that might also have the potential for remediation of diesel-contaminated soils. In this study, petunia, a popular ornamental plant and a model experimental plant in research on phytoremediation of environmental pollutants, was used to evaluate a novel method for rapidly assessing diesel toxicity based on the tolerance of shoots generated through in vitro plant cell culture selection. Petunia shoot lines (L1 to L4) regenerated from diesel-treated callus were compared with those from non-diesel-treated callus (control). Significant morphological differences were observed among the tested lines and control, notably with L1 and L4 showing superior growth. In particular, L4 exhibited remarkable adaptability, with increased root development and microbial counts in a diesel-contaminated potting mix, suggesting that the shoots exhibited enhanced tolerance to diesel exposure. Here, this rapid bioassay has been shown to effectively identify plants with varying levels of tolerance to diesel toxicity and could therefore assist accelerated selection of superior plants for phytoremediation. Further research is needed to understand the genetic and physiological mechanisms underlying tolerance traits, with potential applications beyond petunias to other environmentally significant plants.