Volume Expansion Research Articles

Temperature and Pressure Effects on Phase Transitions and Structural Stability in CsPb2Br5 and CsPb2Br4I Perovskite-Derived Halides.

All-inorganic perovskites exhibit outstanding light absorption properties in the visible range suitable for solar energy applications. We focus on the synthesis of CsPb2(Br,I)5 using mechanochemical procedures. Synchrotron X-ray diffraction (SXRD) data are essential for determining the crystallographic evolution in the 295-753 K temperature range. From room temperature to 573 K, the crystal structure is refined in a two-dimensional (2D) tetragonal framework (space group: I4/mcm) consisting of layers of face sharing [Pb(Br,I)8] polyhedra. Above a transition temperature of Tt = 630 and 621 K, identified from differential scanning calorimetry (DSC) curves for CsPb2Br5 and CsPb2Br4I, respectively, a cubic three-dimensional (3D) corner-sharing perovskite structure is identified, showing substantial Cs and (Br,I) deficiency. A more ionic character for Cs-halide versus Pb-halide is derived from the evolution of the anisotropic atomic displacements. An ultralow thermal conductivity of 0.35-0.18 W m-1 K-1 is related to the low Debye temperatures. From high-pressure SXRD studies, the change in B0 can be attributed to a basic expansion of the unit-cell volume caused by the chemical pressure from iodine within the CsPb2Br5 framework. UV-vis-NIR spectroscopy revealed optical gaps of approximately 2.93 and 2.50 eV, respectively, which agrees with ab initio calculations.

Effectiveness of Vibrapep (OPEP) on Pulmonary functions in phase one of cardiac rehabilitation-A Randomized controlled trial

Background and Aims: According to the WHO report 2022, coronary artery disease is the most prevalent cardiac disease worldwide. Impaired respiratory muscle function, increased secretions and reduced vital capacity are pulmonary complications commonly associated with CABG and Valve replacement surgeries. The purpose of this study was to compare the effect of Vibrapep and standard phase one of cardiac rehabilitation exercises on pulmonary functions. Methods: A Randomized Controlled Trial was conducted on 46 participants. Participants were randomly allocated into two groups, Vibrapep and phase one of cardiac exercises were given to Group A (n = 23), while Group B (n = 23) received only phase one cardiac rehabilitation exercises. The intervention was administered for twice a day for 5 days. Outcome measures such as Sputum volume, maximal inspiratory and expiratory pressure, thoracic expansion, SPO2 level, blood pressure and Peak expiratory flow rate were evaluated at baseline and on 5th day of the study. Results: Wilcoxon test of within-group analysis revealed statistically significant improvements in all parameters for both the interventional and control groups (p<0.05*), except in diastolic blood pressure, whereas, between group analysis done using Mann Whitney U test also showed statistical improvement in both groups on all parameters with (p<0.05*). Conclusion: Vibrapep exhibited to be an effective bronchial hygiene therapy in phase one of cardiac rehabilitation with respect to enhancing pulmonary functions such as sputum reduction, chest expansion, improved respiratory pressure’s, Peak Expiratory Flow Rate along with Cardiac rehabilitation.

Electrospun Multiscale Structured Nanofibers for Lithium‐Based Batteries

Abstract Electrospun is a unique technique for the fabrication of multiscale structured nanofibers (MSNFs), which can be used as functional units for improving the performance of lithium‐based batteries. This review systematically examines how MSNFs, including core–shell, hollow porous, multichannel, wire‐in‐tube, tube‐in‐tube, and hierarchical nanofibers, effectively improve battery performance as components in lithium‐based batteries. The application of aforementioned MSNFs and their chemical modification contributes to the development of lithium‐based batteries with high energy density and enhanced safety when used as electrodes, separators, and electrolytes. Specifically, MSNFs are used to derive electrodes and electrolytes that improve electron/ion transfer rates, increase the utilization ratio of active materials, suppress dendrite growth, and mitigate volume expansion, enabling fast and stable electrochemical reactions at the electrodes. Additionally, MSNFs‐derived separators, which feature more ion transport channels, exceptional mechanical properties, and the capability to inhibit thermal runaway, are also discussed. Finally, the challenges and prospective pathways for electrospun technology in the application of lithium‐based batteries are reviewed.

Golden jackal optimization-based regression analysis application on volume expansion estimation of cement pastes with MgO expansive additive

Golden jackal optimization-based regression analysis application on volume expansion estimation of cement pastes with MgO expansive additive

Designing Tin and Hard Carbon Architecture for Stable Sodium‐Ion Battery Anode

The lack of anodes stability is one among key barriers to the widespread commercialization of sodium‐ion batteries (SIBs). This is attributed to graphite, a well‐known common anode material for a range of commercial batteries including lithium‐ion batteries (LIBs), which limits the insertion of sodium (Na) ions due to their large ionic size. Tin (Sn) has shown its potential as a suitable anode material because it exhibits high capacities in conversion and alloying reactions. However, it endures significant volumetric expansion and slower reaction rates during sodiation. To overcome these challenges, this work presents a novel anode material for SIBs where a 2D layered architecture of Sn with a hard carbon (HC) buffer layer is engineered using physical vapor deposition technique. This novel anode (SnHT/HC) exhibits a high initial capacity of 470 mAhg−1 and an exceptional retention of 438 mAhg−1 after 3000 cycles at 0.2C, with 99 % Coulombic efficiency. SnHT/HC testing at varying fast charge and discharge C‐rate of 5C, 10C, 15C, and 50C has shown promising results. Better electron transport and reduced volumetric changes are perceived to enhance the overall performance of SnHT/HC electrodes.

Overcoming problematic growth phenotypes in organoids from patients with monogenic GI disease.

Patient-derived organoids provide a unique model system to explore disease-causing mutations ex vivo. By using organoids from duodenal or colonic biopsies of pediatric patients with intestinal epithelial disorders, we can directly assay the patient cells to tailor treatment to their unique disease state. The advent of organoid technology from patients with severe intestinal disorders such as Congenital Diarrhea Enteropathies (CoDE) and Very-Early-Onset Inflammatory Bowel Disease (VEO-IBD) has allowed for rapid advances in the understanding of and the treatment of these monogenic disorders. Still, the expansion of these lines for scalable studies is not trivial, and success rates of expansion are variable between groups, and even lab members within the same group. These protocols have been validated on patients with CoDE or VEO-IBD and age-matched control patients. Here, we present our recommended protocols for the cultivation of organoids from pediatric patients with CoDE and VEO-IBD. These protocols have been validated on organoids generated from the duodenum (duodenoids), ileum (ileoids), colon (colonoids) and iPSC-derived intestinal colonoids from pediatric healthy donors or donors with CoDE or VEO-IBD (Gwilt et al., 2023). Using our modified culture media, extended culture times from biopsy preparation and thawing frozen lines, gentle passaging techniques with the incomplete removal of the organoids from the matrigel, and modified monolayer protocols (Maeda et al., 2023; Maeda et al., 2022), we have been able to successfully culture and expand several lines for more than 5 years. The conditions and protocols used here provide a basis for reproducible phenotypes, scaling for larger functional studies on patient lines, and for reproducibility of results between several investigators. We provide a useful starting point and troubleshooting guidelines for the optimization of culturing organoids from any patient with novel disease pathology.

Dynamic Craniotomy With Khanna NuCrani Plates as an Alternative to Craniotomy With Fixed Plates in Traumatic Brain Injury.

Dynamic craniotomy as opposed to a fixed plate craniotomy provides cranial decompression with a controlled outward bone flap movement to accommodate postoperative cerebral swelling and/or hemorrhage. The objective of this study was to evaluate if fixation of the bone flap following a trauma craniotomy with dynamic plates provides any advantage over fixed plates. A review of our clinical series of 25 consecutive adult patients undergoing dynamic craniotomy with the Khanna NuCrani reversibly expandable bone flap fixation plates for the treatment of traumatic brain injury associated with mass lesions including subdural, epidural, and cerebral hematomas was conducted. Postoperative cerebral swelling was encountered in 21 of 25 patients (84%), which was compensated for with outward bone flap movement in all these patients and associated decreased midline shift. Severe brain swelling with outward bone flap movement of 8 mm or more was noted in 40% of the patients. All patients had a normal intracranial pressure after surgery. None of the patients required any reoperations for hematoma evacuation, rescue decompressive craniectomies, cranioplasty, or complications related to wound healing. The bone flap retracted after the resolution of the brain swelling, and none of the patients reported cosmetic symptoms related to bone flap or wound healing. Overall, 84% (21 of 25) of the patients achieved a good outcome. Craniotomy bone flap fixation with dynamic plates is an alternative to craniotomy with fixed plates. The main advantage of dynamic craniotomy over a craniotomy with fixed plates is that it allows for immediate intracranial volume expansion with reversible outward bone flap migration in patients who may develop postoperative worsening brain swelling and/or hemorrhage, with decreased need for repeat surgeries and associated complications.

Interfacial and mass transport phenomena in the tri-ethylene glycol-methane system at process conditions of natural gas dehydration

AbstractUnderstanding the phase and interphase behavior at equilibrium and during the mass transfer between two adjacent fluid phases is relevant for optimizing and designing efficient separation processes. This study experimentally investigates the interfacial and transport behavior of systems comprising tri-ethylene glycol (TEG) and methane (CH4) under conditions relevant to the gas dehydration process. A comprehensive review of the interfacial tension (IFT) and diffusivity of systems involving non-polar and polar compounds at elevated pressures was studied. However, a research gap exists, particularly concerning the interfacial tension of systems involving TEG, TEG + water, and different types of gases as well as the diffusivity of CH4 in TEG. To address this gap, this study presents new data on mixture densities, interfacial tension, and drop volumes of TEG and TEG + water in CH4 and CH4 + CO2 mixtures at temperatures ranging from 20 to 50 °C and pressures up to 250 bar using the oscillating U-tube and pendant drop methods, respectively. Additionally, time-dependent fluid mixture densities and TEG droplet volumetric expansion, coupled with an analytical approach for the binary diffusion were applied to determine the CH4 solubility and diffusivity in TEG. The results show that IFT and drop volume of TEG and TEG + water in CH4 and CH4 + CO2 mixtures decrease with increasing pressure. The presence of water increases the IFT of TEG-CH4 up to $$\sim$$ ∼ 5mN/m, while CO2 reduces it by $$\sim$$ ∼ 2mN/m. Interestingly, the IFT and drop volume of TEG-CH4 show no significant change at elevated pressures when temperatures rise from 20 to 50 °C. IFT remains relatively constant over time at moderate pressures but decreases by $$\sim$$ ∼ 3mN/m at an elevated pressure of 150 bar, suggesting methane solubilization into TEG to have a significant influence which is confirmed by TEG drop volume expansion. The diffusivity of CH4 in TEG at 150 bar and 50 °C is determined to be in the range of 10–10 m2/s, which is in agreement with the diffusivity of CH4 in liquids of similar viscosity, i.e. according correlations may be applied as good engineering practice. To the best of our knowledge, there is no such comprehensive work on the properties of fluid mixtures relevant in gas dehydration processes published up to date.

Bismuth-based material with alveolar-like structure as advanced anode for superior potassium storage

Bismuth (Bi)-based anodes have a promising application in potassium-ion batteries (PIBs) due to their high theoretical capacity. However, Bi-based materials undergo unavoidable and drastic volume expansion during charging/discharging. In addition to this, the problem of poor reaction kinetics severely hinders its development. To solve these problems, we designed Bi2O3-Bi/Carbon hollow nanospheres (Bi2O3-Bi@CHNSs) inspired by the structure of alveoli and its contraction/expansion respiration mechanism. Bi2O3-Bi@CHNSs have an alveolus-like hollow core–shell structure and alveolus respiration-like reversible contraction/expansion mechanism for potassium storage, which provides good structural stability. In situ characterizations confirm that the Bi2O3 and Bi hybrid structures synergistically store potassium through a conversion/alloying mechanism. Bi2O3-Bi@CHNSs exhibited excellent rate performance as anode with a capacity of up to 270.4 mAh g−1 at a current density of 40 A g−1. Assembled as a full cell, the capacity reached 106.5 mAh g−1 at a current density of 30 A g−1, which is superior to most of the reported intact PIBs. This work utilized biomimetic design concepts to elaborate a bionic alveolar structure. It provides a new perspective for optimizing the volume expansion of Bi-based anodes and developing high-performance PIBs.

Hybrid 2D/3D carbon framework confined Si with optimized reaction kinetics for highly stable Li-Ion storage

Three-dimensional (3D) conductive skeletons can optimize electron/Li-ion migration kinetics and alleviate stress accumulation for silicon (Si)-based electrodes. In this study, the modified carbon nanotubes (MCNs) are used as a stress-buffering and high-speed conducting framework, and a hierarchical structure of 3D MCNs interspersed with flour-derived 2D N-doped C layer is designed for Si anode via molecular self-assembly and in-situ carbonization strategies. Experimental and theoretical calculations show that the charge redistribution occurred in the fabricated SiOx and N-doped C interfaces, which induced an electric field response and increased the interfacial electron/Li-ion transfer rate. Multiphysics simulations show that the 2D/3D hierarchical structures of carbon can optimize the physicochemical properties, such as a favorable local electronic environment, flexible stress dissipation mechanisms and good thermal stability. The prepared electrode with 77.1 wt% Si@SiOx shows a low volume expansion rate of 23 % and has an excellent Li-ion storage capability (972.1 mAh g−1 at 4000 mA g−1). Moreover, the structural stability of fabricated Si-based electrodes is enhanced, achieving 0.04 % per cycle capacity decay for 500 cycles at 2000 mA g−1. Such integrating the 2D/3D carbon framework to manipulate Si interfacial properties provides fundamental research for other electrodes plagued by significant volume expansion.

Cu2SnS3/rGO nanocomposites with optimized pore structure for high-performance lithium-ion batteries

Developing advanced anode materials is essential for enhancing the rate performance and stability of lithium-ion batteries (LIBs), which is critical for meeting the demands for next-generation energy storage solutions. In this research, Cu2SnS3/rGO nanocomposites were synthesized via a rapid microwave-assisted one-step method, followed by post-synthetic annealing. The incorporation of reduced graphene oxide (rGO) not only significantly improves its electrical conductivity, but also effectively inhibits the agglomeration of CTS nanoparticles. The nanocrystal size in the CTS/rGO nanocomposites has been dramatically downsized, transitioning from the pristine CTS dimensions of 0.9–1.5 μm to a mere 100 nm. This downsizing is a critical advancement in the electrode, as it enhances the surface area and reactivity of the composite. The subsequent high-temperature annealing process shrinks the pore size in the CTS/rGO nanocomposite, decreasing from an average of 42.13 nm to a more confined range of 7.81 to 8.77 nm, depending on the annealing temperatures. Electrochemical testing reveals that the CTS/rGO-A nanocomposite annealed at 300 °C exhibits superior electrochemical performance to the unmodified CTS and non-annealed CTS/rGO composite. The performance is evidenced by an initial capacity of 1856.97 mAh g−1 at a current density of 1 A g−1 and retains a capacity of 1250.32 mAh g−1 after 500 cycles. To elucidate the underlying mechanisms governing the lithium ion diffusion kinetics, capacitance and diffusion behavior of the CTS/rGO-A electrode, advanced techniques such as galvanostatic intermittent titration technique (GITT) and rate cyclic voltammetry (CV) were utilized. These analyses revealed that the synergistic effect of an increased Li+ diffusion coefficient (DLi+), coupled with a notable capacitive contribution, is demonstrated to the enhanced electrochemical performance observed. Furthermore, the COMSOL Multiphysics simulation also indicates improved structural stability of CTS/rGO-A, attributed to minimized stress from volume expansion during discharge. The CTS/rGO-A nanocomposites, featuring enhanced electrochemical performance, coupled with a straightforward and efficient fabrication method, emerge as a promising material for scalable and practical energy storage solutions.

Vieta–Lucas polynomials-based collocation simulation to analyze the solvent fraction factor in active and passive control flow induced by torsional motion

The present research explores the Boger fluid flow past a stretching cylinder with torsional motion in the presence of the magnetic field. It is assumed that the cylinder rotates continuously around its axis and that the starting point's position along the axis correlates with the cylinder wall's expansion rate. Additionally, the consequence of active and passive control of nanoparticles, activation energy, thermophoresis, and Brownian motion effects are considered. Similarity variables transform the governing partial differential equations into non-dimensional ordinary differential equations (ODEs). Furthermore, the Vieta–Lucas polynomials-based collocation method (V-LPBCM) is employed to solve the resulting ODEs. The V-LPBCM outcomes of Nusselt and Sherwood numbers are compared with Runge–Kutta Fehlberg's fourth-fifth-order scheme for validation purposes. The impact of various dimensionless parameters on the different profiles is depicted in the graphical representation. The increase in values of the magnetic parameter, the ratio of relaxation time, and the Reynolds number decline the velocity profile. The velocity profile increases as the values of the solvent fraction parameter rise. The thermal profile increases as the heat source/sink, and thermophoretic parameters rise. The increase in values of activation energy parameter increases the thermal profile.

The Challenge of Predicting the Solar Wind Speed near Sunspot Minimum

By applying potential-field source-surface and potential-field current-sheet extrapolations to photospheric field maps from three different observatories, we predict the solar wind speed at Earth for several Carrington rotations during 2018–2021 and compare the results with in situ observations. The predicted speeds are taken to be inversely correlated with the rate of flux-tube expansion inside the source surface, located at a heliocentric distance of 2.5 R ⊙. The results often differ markedly from one observatory to another and are very sensitive to the latitudinal position of the ecliptic relative to the narrow belt of slow wind that surrounds the source-surface neutral line. Our main conclusions are that (1) the magnetograph measurements themselves are a major source of uncertainty in solar wind predictions; (2) these uncertainties are especially large near solar minimum, when Earth is located near the rapid transition between slow and fast wind that occurs on either side of the heliospheric current sheet; (3) comparison of the derived open field regions with observed coronal holes provides a strong, underutilized constraint on wind speed predictions; and (4) the observed polarity of the interplanetary magnetic field provides another important constraint on the location of the source region.

Enhancement in the Electrical Properties and Electromagnetic Interference Shielding Performance of Acrylonitrile–Butadiene–Styrene/Carbon Nanotubes Foams via the Introduction of Bimodal Cell Structures

The cell structures of conductive polymer‐based composite foams significantly influence their electrical properties and electromagnetic interference (EMI) shielding effectiveness (SE), necessitating a thorough understanding of how these properties improve with evolving cell structures. In this study, supercritical CO2 foaming technique was manipulated to fabricate acrylonitrile–butadiene–styrene (ABS)/carbon nanotubes (CNTs) foams. The constant‐temperature mode was used to prepare unimodal foams (UF), while the bimodal foams (BF) were produced by varying‐temperature mode. The foaming properties, electrical conductivity, complex permittivity, and EMI SE of ABS/CNTs foams with various cell structures are methodically investigated at identical volume expansion ratio and CNTs content. The electrical conductivity of bimodal ABS/CNTs foam with CNTs content of 20% (BF‐C20) is 0.2191 S cm−1, higher than that of unimodal ABS/CNTs foam with CNTs content of 20% (UF‐C20) (0.1765 S cm−1) owing to the introduction of bimodal cell structures. Complex permittivity results manifest that at 8.2 GHz, the ε′ and ε″ of BF‐C20 are 67.7 and 74.5, respectively, which are higher than 57.9 and 52.9 of UF‐C20. Among all ABS/CNTs foams, the total EMI SE of BF‐C20 attains the highest EMI shielding value, which reaches 30.2 dB. Furthermore, the absolute shielding effectiveness of BF‐C20 is 188.5 dB (g cm−2)−1, which is 17.3% higher than that of UF‐C20.

Incorporation of Mo2C nanoparticles to pollen-derived 3D porous carbon as electrocatalyst for high performance lithium-sulfur batteries

The practical application and development of lithium‑sulfur (LiS) batteries are limited by the slow redox reaction kinetics and shuttle effect of polysulfide lithium (LiPSs). To address these issues, three-dimensional porous carbon (PC, derived from rapeseed pollen) modified with molybdenum carbide (Mo2C) nanoparticles is prepared by a simple and environment-friendly method. On the one hand, the PC-Mo2C host material can facilitate the uniform loading of sulfur and reduce its volume expansion due to its porous carbon structure. On the other hand, it mitigates the shuttle effect by effective chemical adsorption of LiPSs to form strong physical confinement and catalyze the conversion of LiPSs via the aid of the decorated Mo2C nanoparticles. Density functional theoretical calculations also illustrate the Mo2C nanoparticles are capable of inhibiting the shuttle of LiPSs and further improving the cycling stability. The results show that the PC-Mo2C/S electrode exhibits excellent electrochemical performance with high cycle stability (fading rate of 0.066 % per cycle at 0.2C and 0.054 % per cycle at 1C) and outstanding rate capacity (623.2 mAh g−1 at 5C).

Prop-1-ene-1,3-sultone as interfacial-engineering additive in nonflammable electrolyte for 4.45 V LiCoO2/Si-Graphite lithium-ion batteries with high performance

To achieve high energy density for lithium-ion batteries, employing high-voltage cathodes and Si-based anodes is available. Fluoroethylene carbonate-based electrolytes show potential for use in high-voltage lithium-ion batteries due to their superior oxidation stability. However, fluoroethylene carbonate is prone to reductively decompose on the anode and brings about adverse effects on the battery performance. In this work, prop-1-ene-1,3-sultone is incorporated as an efficacious film-forming additive into fluoroethylene carbonate/dimethyl carbonate electrolyte for the purpose of ameliorating the compatibility with Si-Graphite anode in high-voltage lithium-ion batteries. The flame retardant (ethoxy)pentafluorocyclotriphosphazene is also incorporated into the electrolyte to guarantee the nonflammable feature. This nonflammable electrolyte has an ideal conductivity higher than 8 mS cm−1 at 25 °C, and it grants competitive performances to a high-voltage LiCoO2/Si-Graphite pouch cell. This cell after 300 cycles test exhibits a capacity retention of over 80 % at 1C, and the discharge capacity at 8C exceeds 50 % of that at 1C. By virtue of X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy techniques, it is confirmed that prop-1-ene-1,3-sultone enhances interfacial properties of Si-Graphite anode and contributes to an optimized interface, which restrains the volume expansion of Si-Graphite and inhibits persistently reductive decomposition of electrolytes.

Effect of carbonation curing on the characterization and properties of steel slag-based cementitious materials

Steel slag (SS)-based cementitious materials usually exhibit poor bulk stability, poor early activity and low mechanical strength, which greatly limits the consumption of SS in construction materials. Carbonation curing can not only control volume expansion but also improve the mechanical properties and durability of SS-based cementitious materials. First, the physicochemical properties of the SS were summarized. Then, the reaction mechanism of carbonation curing was analyzed. Next, the mineral composition, microstructure, morphology and CO2 uptake of the SS-based materials during carbonation curing were discussed, and the effects of carbonation curing on the mechanical properties, volume stability and durability of the SS-based materials were investigated. Finally, some suggestions for the application of carbonation curing in SS-based materials were given. The development and application of carbonation curing in SS-based materials can achieve the large-scale utilization of SS in cementitious materials and the effective reduction of CO2 emissions.

Ecosystem service value in the context of urbanization: comparison among economic-social regions of Vietnam

Urbanization is one of the important features of socio-economic development and it has a major impact on the value of ecosystem services (ESV). This study aims to quantify ESV for the entire country of Vietnam with the research unit being 6 socio-economic regions. This can be considered the first study in Vietnam to quantify the ESV for the entire country. The study calculated the annual urban land growth index (AI) and the annual urban land expansion rate (AER) to determine the urbanization status in the six study areas. The study collected input data from JAXA for four years: 1990, 2000, 2010, and 2020. Research results show that urban land area tended to increase and forest land area decreased sharply. The AI and AER indicated that the period 2000–2010 was a period of rapid growth in Vietnam. Meanwhile, the ESV for all of Vietnam increased year by year. The period 2000–2010 witnessed a growth in ESV about 2.35 times higher than the period 1990–2000, and about 0.1% lower than the period 2010–2020. Overall, MKD was the region showing strong growth in ESV from 1990 to 2020. Compared to that, NMR was the region with the largest decline in the 20 years from 1990 to 2010, and CHR in the past 10 years. This research contributes to enriching reference sources for Vietnamese and world researchers to have a broader view of ESV as well as the annual urban growth rate in Vietnam from 1990 to 2020.

Soil Mulching Practices Increased Grain‐Filling Capacity of Rainfed Maize (Zea mays L.) by Improving Soil Hydrothermal Condition and Leaf Photosynthetic Potential

ABSTRACTGrain‐filling rate and duration largely affect the grain‐filling capacity, which determines the grain yield of maize (Zea mays L.). Nevertheless, there is little about the mechanism of how various soil mulching practices affect the leaf photosynthetic potential and subsequent grain‐filling capacity of maize. Field experiments were undertaken on rainfed summer maize in northwest China under flat cultivation without mulch (FNM), flat cultivation with straw mulch (FSM), flat cultivation with transparent film mulch (FTF), flat cultivation with black film mulch (FBF), ridge‐furrow cultivation with transparent film mulch (RTF) and ridge‐furrow cultivation with black film mulch (RBF) in 2021 and 2022. This study explored the impact of various soil mulching patterns on soil hydrothermal condition, leaf growth, photosynthetic potential, aboveground dry matter growth and grain‐filling process of rainfed maize. The dynamics of leaf area index (LAI) and grain‐filling were fitted with growth equations, and the relationships of grain‐filling rate, leaf area duration and LAI withering rate were quantified. The results showed that, compared with FNM, other five soil mulching practices improved soil hydrothermal condition, the maximum LAI and leaf expansion rate but reduced leaf withering rate, thereby increasing radiation interception rate (RI) at the grain‐filling stage. The soil mulching practices also increased leaf SPAD value, net photosynthetic rate, photosynthetic nitrogen use efficiency and the aboveground dry matter. Compared with FNM, other five practices extended the effective grain‐filling period and the active period of grain‐filling, increased the maximum and mean grain‐filling rates, improved the 100‐kernel weight and the average kernel per ear (KPE), thereby increasing grain yields by 9.2%, 33.7%, 38.0%, 46.3% and 58.6%, respectively. The functional relationships of grain‐filling rate and accumulated leaf area duration (y = a/(1 + b*exp(−kx))), and the functional relationships of grain‐filling rate and LAI withering rate (y = (a + cx + ex2)/(1 + bx + dx2)) were first proposed. In conclusion, various soil mulching practices improved the soil hydrothermal condition, green leaves growth process and RI, which improved the leaf photosynthetic potential and the grain‐filling capacity, thereby increasing the 100‐kernel weight, KPE and grain yield. This study can help us quantitatively describe and better understand the maize grain‐filling process under various mulching practices.

Solid-State Diffusion Bonding of Aluminum to Copper for Bimetallic Anode Fabrication

The diffusion-bonding technique has been utilized to join various Al alloys (AA1060, AA2024, AA3003) to Cu for bimetallic anode application. This process aims to achieve robust metallic continuity to facilitate electron transfer, while carefully managing the growth of the intermetallic layer at the bonding interface. This control preserves the active volume of aluminum and prevents excessive brittleness of the anode. Optimization efforts have focused on different pressures, surface treatments of parent materials, and bonding parameters (temperature 450–500 °C and time 5–60 min). The optimal conditions identified include low bonding pressures (8 MPa), surface treatment involving polishing followed by chemical cleaning of the surfaces to be bonded, and energetic bonding conditions tailored to each specific aluminum alloy. Preliminary electrochemical characterization via cyclic voltammetry (CV) tests has demonstrated high reversibility intercalation/deintercalation reactions for up to seven cycles. The presence of the different alloying elements appears to contribute significantly to maintaining the high intercalation/deintercalation reaction reversibility without considerable modification of the reaction potentials. This effect may be attributed to alloying elements effectively reducing the overall alloy volume expansion, potentially forming highly reversible ternary/quaternary active phases, and creating a porous reaction layer on the exposed aluminum surface. These factors along with the influence of the Cu parent material collectively reduce the stress during volume expansion, which is the responsible phenomenon of the anode degradation in common Al anodes.