Exothermic Research Articles

Rapid Thermal Shutdown of Deep-Eutectic-Polymer Electrolyte Enabling Overheating Self-Protection of Lithium Metal Batteries.

Safety concerns and uncontrollable dendrite growths have severely impeded the advancement of lithium-metal batteries. Herein, a safe deep-eutectic-polymer electrolyte with built-in thermal shutdown capability is proposed by utilizing hydrophobic association of methylcellulose within a novel deep-eutectic-solvent. Specifically, at elevated temperatures, methylcellulose chains aggregate to form dense polymer networks due to hydrophobic association and break the solvation structure equilibrium inside the deep-eutectic system through encapsulating Li+ in polymer matrix, leading to quick solidification of the electrolyte. The solidified electrolyte obstructs Li+ transports and terminates electrochemical processes, protecting LMBs from unstoppable exothermic chain reactions. The accelerating rate calorimeter tests of 1 Ah pouch cells demonstrate that the as-prepared electrolyte significantly improves the onset self-heating temperature from 73°C for conventional electrolytes to 172°Cand prolongs the thermal runaway waiting time more than 20 hours. More impressively, benefiting from its favorable electrochemical performance, this polymer electrolyte enables LiNi0.8Mn0.1Co0.1O2||Li batteries to retain 92% capacity over 200 cycles and LiFePO4||Li batteries to maintain 90% capacity after 500 cycles. This research paves a promising avenue for enhancing both the safety and electrochemical performance of high-energy-density LMBs.

Application of microencapsulated phase change materials for controlling exothermic reactions

Application of microencapsulated phase change materials for controlling exothermic reactions

On‐Purpose Production of Light Olefins Through Oxidative Dehydrogenation: An Overview of Recent Developments

AbstractProducts made from light olefins play an important role in our daily lives. Traditional light olefins production based on steam cracking and fluid catalytic cracking suffer from high energy consumption and CO2 emissions. Thereby, the continually increasing demand for light olefins needs to be met through more environmentally sustainable procedures. On‐purpose production routes are preferred choice among petrochemicals manufacturers, being energy efficient and having lower carbon footprint. Among them, oxidative dehydrogenation (ODH) of light paraffins is a thermodynamically favourable exothermic process as compared to non‐oxidative routes. They can be operated at lower temperatures and have propensity of low coke deposition on catalyst, thereby resisting rapid catalyst deactivation. Herein, we have analysed various catalytic systems utilised in the oxidative dehydrogenation process. We have reviewed role of support, chemical composition of catalyst, presence of dopant, oxidation state of active metal, controlled surface modification by oxidative and reductive pretreatments, and reaction factors for each system. The performance of various catalytic systems for ODH of ethane, propane and butane in the presence of O2, CO2, N2O and special oxidants have been reviewed. A short critical overview on emerging on‐purpose routes for the production of renewable 1,3 butadiene has also been discussed.

Investigation of Microhardness, Microstructural, Tribological, and Thermal Properties of Al7075/TiO2/Kaoline Hybrid Metal Matrix Composites Produced by Powder Metallurgy Process

The shift from traditional, single‐component metals and alloys continues, and researchers are currently investigating alternative materials. This evolution has led to the creation of innovative materials, including hybrid metal‐matrix composites. The present study aims to investigate the microstructural, surface morphological, and thermal properties of a novel Al7075/TiO2/Kaoline hybrid metal‐matrix composite prepared using high‐energy ball milling and sintering methods. In this study, phases related to the composite components are formed depending on the milling time, no undesirable phase is formed, but the peak intensities decreas as the milling time increases. Particle size increases from 63 to 215 μm with increasing milling time. Increasing the kaoline reinforcement ratio and sintering temperature increases the microhardness from 62.27 ± 2 to 75.83 ± 2 HV, and reduces the friction coefficient from 0.82 ± 0.01 to 0.62 ± 0.01. The wear rate of the composite without kaoline addition is 2.1 (mm3 m−1) × 10−3, while with 6 wt% kaoline addition, it decreases to 1.5 (mm3 m−1) × 10−3. There are no cracks in the composite other than plastic deformation due to sintering and wear. Peaks indicating endothermic and exothermic reactions during continuous heating occurr in the 635–750 °C temperature range.

Preparation of adsorbent from coal gasification slag for the treatment of waste water from lanchar and its adsorption mechanism

ABSTRACT Solid waste coal gasification slag has certain hardness, porosity, pore structure and specific surface area, etc. which can be utilized in environmental protection materials and other areas of high value. Yulin City, high-quality coal resources derived from the excellent quality of charcoal products, but its processing will produce a large number of high chemical oxygen demand (COD), high volatile phenol, high ammonia nitrogen ‘three high’ wastewater, the ecological environment is very harmful. The results of the modification of the refined coal gasification fine residue showed that the removal rates of the three were enhanced to 91%, 89% and 83%, respectively, after adsorption at a pH of 9.5, an injection ratio of 1:5 and 25 ℃ for 25 min. The reason is that the modification treatment significantly increased the specific surface area of the adsorbent from 103 m2/g to 606 m2/g, which effectively increased the adsorption active sites for the pollutant molecules. The adsorption process of COD from modified refining coal gasification slag for the treatment of charcoal wastewater was thermodynamically investigated. The thermodynamic study shows that the adsorption process of modified refining coal gasification slag on pollutants in the charcoal wastewater is an exothermic and spontaneous process.

Preparation of Composites Derived from Modified Loess/Chitosan and Its Adsorption Performance for Methyl Orange

A modified loess/chitosan composite (ML@CS) was prepared via solution. The microstructure and physicochemical properties of ML@CS were characterised via scanning electron microscope (SEM), Zeta potential, X-ray diffraction (XRD), Fourier transform infrared spectrum (FT-IR), and thermogravimetric analysis (TGA). An aqueous solution of methyl orange (MO) was used as simulated wastewater from which the influence of the initial concentration and pH of MO, the dosage amount and regeneration performance of ML@CS, adsorption temperature, and time on the adsorption effect of MO were systematically investigated. The adsorption kinetics, isothermal adsorption, and adsorption mechanism were also analysed. The results indicate that ML@CS had a good adsorption effect on MO. When the initial concentration of MO was 200 mg/L, pH was 5.0, and ML@CS dosage was 1.0 g/L, the adsorption equilibrium could be reached within 180 min at room temperature, and the equilibrium adsorption capacity and removal rate reached 199.52 mg/g and 99.75%, respectively. After five adsorption–desorption cycles, the MO removal rate remained above 82%. The adsorption behaviour of ML@CS for MO conforms to the pseudo–second–order kinetic model and the Langmuir isotherm adsorption model. The spontaneous exothermic process was mainly controlled by monolayer chemical adsorption and the physical adsorption only played an auxiliary role. ML@CS efficiently adsorbed MO in water and can be used as a high-efficiency, low-cost adsorbent for printing and dyeing wastewater treatment.

Arabic gum-grafted-polyaniline@MnFe2O4/UIO66-NH2 bionanocomposite as adsorbent for quercetin antioxidant: Efficiency, kinetics, thermodynamics and isotherm modelling

Quercetin is one of the most powerful antioxidants in nature and a major dietary flavonoid, so its efficient recovery by nanoadsorbents can be valuable for human health. In this study, the nanocomposite Arabic gum-grafted-polyaniline@MnFe2O4/UIO66-NH2 (AG-g-PANI@MnFe2O4/UIO66-NH2) was synthesized by in situ copolymerization. The physicochemical and structural properties of the AG-g-PANI@MnFe2O4/UIO66-NH2 nanocomposite were examined using various methods, including XRD, FE-SEM, FT-IR, EDX, VSM, TGA, and BET. The adsorption capacity of natural nanoadsorbent was evaluated for the adsorption of quercetin antioxidant from an ethanol-water solution (50 % v/v) in a batch system. The influence of controlling factors such as solution pH, adsorbent dose, contact time, initial quercetin concentration and temperature on the adsorption process was investigated. The highest adsorption capacity (9.1157 mg.g−1) was achieved at a pH of 8, with 0.025 g of adsorbent, a quercetin solution concentration of 20 mg.L−1, a 300 min contact time and at the temperature 298.15 K. In addition, the data from adsorption experiments were analyzed using different isotherm and kinetic models. The findings demonstrated that the Temkin isotherm and the pseudo-second-order kinetic model are the most suitable for representing the adsorption behavior. In addition, from analysis of the temperature effect was found that the adsorption of quercetin on AG-g-PANI@MnFe2O4/UIO66-NH2 is a spontaneous (∆G° < 0) and exothermic (ΔH° < 0) process. Finally, the reusability of nanoadsorbent and desorption kinetics of quercetin were investigated and it was specified that AG-g-PANI@MnFe2O4/UIO66-NH2 can be effectively renewed and recycled, maintaining its adsorption efficacy without significant reduction after five repeated cycles.

Mechanism for Site-Selective Hydroboration of C70 Fullerene with Borane by DFT-D3 Study.

We studied the hydroboration of the C70 fullerene using both B3LYP-D3(BJ)/6-311G(d,p) and M06-2X-D3/6-311G(d,p) levels of theory, incorporating the empirical dispersion interaction, and Fukui index calculations. Potential energy surfaces (PESs) and Gibbs free energy surfaces (GFESs) were calculated for the pathways from four BH3 adducts (located at the AB, CC, D, and E sites) on the C70 to eight products formed by the 1,2-addition of BH3 across the four [6,6]-ring fused bonds (AB, CC, DE, and EE) and across the two [5,6]-ring fused bonds (AA and DD). These pathways are two-step consecutive reactions. We denoted the positions on the fullerene cage as A through E, from the pole to the equator, based on the D5h symmetry of the C70 fullerene. In the first step reaction, the product ratios for the four adduct intermediates should be as the primary intermediate BH3(D), the secondary intermediate BH3(AB), the tertiary intermediate BH3(CC), and the minor intermediate BH3(E), based on the Fukui indices. In addition, in the second step reaction, transition states (TSs) from four adduct intermediates to eight product isomers, namely, BH2(A)H (B) to BH2(E)H (E), were obtained using the QST2 method. The calculated reaction coordinates showed exothermic reactions for all bonds except the EE bond. We also confirmed the transition states by frequency calculations and intrinsic reaction coordinate (IRC) analyses. The PESs and GFESs suggest spontaneous processes for the four isomers, of which the primary products are BH2(A)H (B) and its isomer BH2(B)H (A), the secondary product is BH2(C)H (C), and the tertiary product is BH2(D)H (D), all formed through adduct intermediates. Therefore, through the hydroboration reaction of C70, we could predict and design the site selectivity of C70 by controlling the energy barrier of the transition state in the second step of the reaction. This implies that we could selectively synthesize mainly BH2(B)H (A) isomers across the AB-[6,6]-ring fused bond and also design BH2(D)H(D) isomers across the DD-[5,6]-ring fused bond. Also, the calculations of formation rate constants can well simulate the experimental ratio of two C70H2 isomers by the hydrolysis of BH2(A)H(B), BH2(B)H(A), and BH2(C)H(C) products at room temperature.

Preparation of Poly(allylamine Hydrochloride) Grafted Porous Boron Nitride Fibers for Efficient Cr(VI) Adsorption from Aqueous Solution.

Cr(VI) pollution poses great harm to the cyclic utilization of groundwater and surface water resources. Efficient adsorbent materials have great potential to change this situation and assist in the restoration of ecosystems. This work chooses porous boron nitride fibers (pBN) with stable physical and chemical properties as the matrix, 3-aminopropyltriethoxysilane (APTES) as the coupling agent, and uses a one-step crosslinking method to graft poly(allylamine hydrochloride) (PAH) onto pBN, forming pBN-AS@PAH with fascinating Cr(VI) adsorption capacity. PAH is uniformly covered and modified on the surface of pBN, and the composite with high specific surface area (383.33 m2/g), large pore volume (0.37 cm3/g), and abundant amino groups. Its equilibrium adsorption capacity for Cr(VI) can reach up to 123.32 mg/g, and the adsorption behavior follows the quasi second-order kinetic model and Langmuir model, indicating the chemical adsorption process of monolayer. The adsorption style belongs to a spontaneous exothermic process and has the optimal adsorption effect at a pH of ~2. Additionally, after cycling for 5 times, the decrease rate of adsorption capacity is less than 10 %, showing an excellent reusability.

The Influence of Thermophysical Parameters on Thermal Runaway Characteristics for Pouch-Type Lithium-Ion Batteries

Abstract The thermal variation during the temperature rise process of batteries is closely related to multiple physical parameters. Establishing a direct relationship between these parameters and thermal runaway (TR) features under abusive conditions is challenging using theoretical equations due to complex electrochemical and thermal coupling. In this paper, a high-temperature thermal runaway model of pouch-type lithium-ion battery is established through electrical-thermal coupled approach, demonstrating a good agreement between the simulation and experimental results. The results reveal distinct trends in thermal parameters of the early temperature rise, trigger time for TR and peak temperature during TR process, for varying convective heat transfer coefficient, cell specific heat capacity, cell density and cell thermal conductivity. Across various convective heat transfer coefficients, the rates of temperature increase, moments of TR, and peak temperatures within a battery emerge as the cumulative outcomes of competing processes of the intricate exothermic secondary reactions within the battery, and the heat transfer with the surroundings. Batteries with lower heat capacity exhibit reduced thermal inertia and heightened sensitivity to temperature changes. Alterations in the thermal capacity of a battery wield a profoundly significant impact upon the moment of thermal runaway within the battery. Enhancing the thermal conductivity yields limited improvements in heat dissipation during thermal runaway primarily due to the relatively small geometrical scale of the battery. Results of this paper can provide valuable insights for size optimization design, thermal management system optimization design, thermal runaway safety warning and prevention of Lithium-ion batteries.

Effective remediation of toxic metal ions (Cd(II), Pb(II), Hg(II), and Ba(II)) using mesoporous glauconite-based iron silicate nanorods: Experimental and theoretical studies

Glauconite minerals underwent an advanced exfoliation and scrolling process, yielding novel iron silicate nanorods (GRs) with increased surface area, reactivity, and improved physicochemical properties. These structures were introduced as superior adsorbents for the highly efficient adsorption of various toxic metal ions, such as Cd(II), Pb(II), Hg(II), and Ba(II). The GRs exhibited maximum adsorption capacities of 283 mg/g for Cd(II), 247 mg/g for Pb(II), 132.3 mg/g for Hg(II), and 165.2 mg/g for Ba(II). The adsorption properties of the GRs during the adsorption of these four metal ions were elucidated through traditional (Langmuir model) and advanced (monolayer model of single energy site) isotherm analyses. Advanced isotherm modeling revealed that the GR surface was saturated with numerous effective adsorption sites, with densities of 125 mg/g for Cd(II), 68.8 mg/g for Pb(II), 40.9 mg/g for Hg(II), and 57.9 mg/g for Ba(II). Moreover, each site could accommodate approximately four ions of the studied metals, which are vertically oriented and participate in multi-ionic adsorption reactions. Energetic analyses, whether based on classical models (Gaussian energy <8 kJ/mol) or advanced models (adsorption energy <40 kJ/mol), indicated that the adsorption processes are governed by physical mechanisms, including electrostatic attractions, van der Waals forces, and hydrogen bonding. Furthermore, thermodynamic assessments confirmed that the adsorption of these ions occurs through exothermic and spontaneous reactions.

Experimental measurement and modeling of the internal pressure in cylindrical lithium-ion battery cells under abuse conditions

The internal pressure evolution of cylindrical lithium-ion battery cells under abuse tests is evaluated in this work. The pressure evolution is recorded through a cavity at the center of the inner structure of the cylindrical cell. Understanding pressure buildup due to exothermic reactions aids in designing safety features, such as improved venting mechanisms. The pressure activation for the safety mechanism depends on both the venting cap design and the different abuse test conditions. This study focuses on two important parameters: the state of charge (SOC) and the overheating ramp. The SOC significantly influences the venting pressure activation at the overheating abuse tests. The 18650 cell exhibits a similar venting behavior as the 21700 cell, with pressure safety mechanisms activating sooner for the 18650 cell. The geometric structure of the battery and safety mechanisms significantly influence vent-activation thresholds. After the Current Interruptor Device (CID) breakdown, pressure rises exponentially until venting occurs, due to gas generation from the decomposition of internal components and electrolyte vaporization. With the experimental data for the overheating abuse test, a model that predicts the evolution of the pressure has been developed. For the overcharging abuse test, the pressure evolution has been measured with different current rates (C-rates) to simulate overcharge with standard charging current and fast charging current. However, the internal pressure inside the cell activates the current interrupt device, which avoids overcharging the cell, thus preventing the thermal runaway (TR) from occurring.

Research on the Synergistic Inhibition of Angiotensin-Converting Enzyme (ACE) by the Gastrointestinal Digestion Products of the ACE Inhibitory Peptide FPPDVA.

To gain a deeper understanding of the ACE inhibition effect, the inhibitory effect of ACE-inhibiting peptide (ACEIP) FPPDVA's digestive products on ACE was further investigated. Two novel peptides, PD (IC50 = 161.1 ± 1.10 μM) and DV (IC50 = 66.51 ± 0.99 μM) were identified in the digestive products of FPPDVA using LC-MS/MS. The Peptide Mix (FPPDVA, PD, and DV) exhibited a remarkable synergistic effect on ACE inhibition by significantly enhancing it by up to 508% compared to the individual peptides alone. Furthermore, theoretical simulations suggest that the Peptide Mix synergistically inhibits ACE activity by forming more stable complexes with the active site of ACE, facilitated by an increased number of hydrogen bonds. Additionally, Lineweaver-Burk plot analysis and spectroscopic studies further verified the presence of these stable complexes. ITC results show that the combination of Peptides Mix and ACE is a spontaneous exothermic process driven by entropy. The study showed that FPPDVA has a stronger inhibitory effect on ACE after digestion, making it suitable as an antihypertensive peptide in functional foods.

Assessment of Nuclear Fusion Reaction Spontaneity via Engineering Thermodynamics.

This work recalls the basic thermodynamics of chemical processes for introducing the evaluation of the nuclear reactions' spontaneity. The application and definition of the thermodynamic state functions of the nuclear processes have been described by focusing on their contribution to the chemical potential. The variation of the nuclear binding potentials involved in a nuclear reaction affects the chemical potential through a modification of the internal energy and of the other state functions. These energy changes are related to the mass defect between reactants and products of the nuclear reaction and are of the order of magnitude of 1 MeV per particle, about six orders of magnitude larger than those of the chemical reactions. In particular, this work assesses the Gibbs free energy change of the fusion reactions by assuming the Qvalue as the nuclear contribution to the chemical potential and by calculating the entropy through the Sackur-Tetrode expression. Then, the role of the entropy in fusion processes was re-examined by demonstrating the previous spontaneity analyses, which assume a perfect gas of DT atoms in the initial state of the fusion reactions, are conservative and lead to assessing more negative ΔG than in the real case (ionized gas). As a final point, this paper examines the thermodynamic spontaneity of exothermic processes with a negative change of entropy and discusses the different thermodynamic spontaneity exhibited by the DT fusion processes when conducted in a controlled or uncontrolled way.

Improvement of tetracycline removal using amino acid ionic liquid modified magnetic biochar based on theoretical design

In current research, biochar is widely used to remove antibiotic contamination from the environment. However, original biochar produced through direct pyrolysis has significant limitations in removing antibiotics. In this paper, response surface methodology provided the laudable choice for magnetic poplar biochar (MPBC) considering the synergistic effect of multi-factors as well as the restrictions abundance experiments during the preparation of MPBC. Amino acid ionic liquids (AAILs) are a class of ionic liquids in which amino acids act as the anionic component, combining the tunable properties of ionic liquids with the biocompatibility and functionality of amino acids. To ameliorate adsorption capacity of MPBC, tetra-ethylammonium glycinate ([TEA][Gly]) with the best affinity for tetracycline (TC) were screened from 600 AAILs based on theoretical predictions using the conductor-like screening model for real solvents (COSMO-RS) without extensive experimental. Furthermore, AAILs-modified magnetic biochar (MPBC-AAIL) was synthesized chemically for the first time. Adsorption kinetics, isotherms, and thermodynamic analyses revealed that TC adsorption by both MPBC and MPBC-AAIL is a monolayer, spontaneous, and exothermic chemical process. Moreover, MPBC-AAIL exhibited a maximum adsorption capacity of 305.9 mg·g−1. Meanwhile, MPBC-AAIL maintains superior adsorption performance for TC in different impurity solutions as well as in real water samples. The excellent reusability and selective adsorption capacity of the material demonstrate the superiority of the theoretical based design. The characterization reveals that the adsorption mechanisms include pore filling, π-π interactions, surface complexation, hydrogen bonding, and electrostatic interactions. In addition, theoretical calculations showed that ionic liquid modification altered the adsorption sites between TC and MPBC-AAIL, leading to enhanced adsorption. This comprehensive study introduces an innovative modification of biochar, providing a novel approach to designing biochar composites and promoting their application in the remediation of complex environmental pollution.

Impact of external heating and state of charge on discharge performance and thermal runaway risk in 21700 Li-ion batteries

This study investigates the combined effects of external heating and State of Charge (SOC) on the discharge performance and thermal runaway risk of 21700 Li-ion batteries. Experiments subject commercially available 21700 cylindrical cells to various external heating conditions at different SOC levels (20, 40, 60, 80, and 100 %) while measuring discharge performance and thermal behavior at different discharge rates (0.2, 0.5, 1, and 1.5C). The study emphasizes the significance of Li-ions' spatial arrangement and maintaining electrical charge in the electrolyte to evaluate battery performance. Numerical simulations are then conducted to complement the experimental data and provide deeper insights. The results reveal a significant degradation in discharge performance with increasing external heat, characterized by voltage drops and reduced capacity. Cells with higher SOC levels exhibit more severe exothermic reactions during external heating, leading to a higher likelihood of thermal runaway. Cells operated at a moderate SOC of 40 % demonstrate a significantly lower risk of thermal runaway under similar heating conditions. The rapid rise in temperature at 100 % SOC of batteries showed a sharp increase of over 20 °C per second. Temperature spikes were noted at specific time intervals corresponding to different SOC levels: 100, 80, 60, 40, and 20. At this critical point, temperatures ranged from 135 to 182 °C, indicating potential thermal issues from internal short circuits causing separator melting. These findings highlight the critical role of SOC management in ensuring the safe and reliable operation of 21700 Li-ion batteries, particularly in applications involving elevated temperatures.

Dephosphorisation behaviour of blast oxygen furnace (BOF) slag due to carbothermal reduction

ABSTRACT The thermodynamic analysis of converter slag by carbothermal reduction was carried out. The laboratory tests of converter slag by carbothermal reduction dephosphorisation were carried out in molybdenum disilicide high-temperature resistance furnace and 500 kg top bottom combined blowing multi-functional test furnace respectively. The results show that the reaction temperature and kinetic conditions have a great influence on the dephosphorisation rate. In the top and bottom combined blowing multi-functional test furnace, coke powder is used as both reducing agent and heating agent. The exothermic reaction between coke powder and oxygen can ensure that the dephosphorisation reaction can be carried out at a higher temperature. At the same time, the good stirring of topblowing oxygen on the slag layer is conducive to further improve the dephosphorisation reaction speed.

Convection flow of NE-phase change material-water mixture in evacuated tube solar collector manifold: Numerical analysis of MHD double-diffusive convection and exothermic reaction

This study investigates the convection flow of nano-encapsulated phase change material (NEPCM)-water mixture in an evacuated tube solar collector manifold, focusing on the effects of magnetohydrodynamic (MHD) double-diffusive convection and exothermic reaction. Computational fluid dynamics simulations using the Galerkin finite element method were employed to analyze temperature and concentration distributions, fluid flow, melting zone of PCM nanocapsules, Nusselt number, Sherwood number, entropy generation, and thermal performance. The numerical analysis considers a range of dimensionless parameters, including Rayleigh number (Ra=103−105), Lewis number (Le=0.1−10), buoyancy ratio (Nz=1−5), nanoparticle concentration (ϕ=0.01−0.035), fusion temperature (ϴf=0.1−0.9), Stefan number (Ste=0.1−0.9), Hartmann number (Ha=0−50), magnetic field inclination angle (γ=0°−90°), and Frank-Kamenetskii number (FK=0−2.5). Results show that increasing Ra enhances the average Nusselt number (Nuav) by up to 156.1 % and the average Sherwood number (Shav) by up to 104.5 %, while increasing the total entropy generation by up to 13,155 %. Increasing FK reduces Nuav by up to 42.2 % but increases Shav by up to 13.1 %. The Lewis number and buoyancy ratio significantly influence the hydrothermal performance, with Nuav exhibiting non-monotonic behavior and Shav increasing by up to 240.9 % as Le increases. The nanoparticle concentration enhances Nuav by up to 49.7 %. Interestingly, the magnetic field effects are less pronounced than in previous studies, with Ha having a minor impact on Nuav and Shav. These findings have significant implications for the design and optimization of evacuated tube solar collectors and other thermal energy storage systems, potentially leading to improved efficiency and performance in real-world applications.

Investigation on mechanism of mechanical activation and chemical reactions in CMP of diamond assisted by hydroxyl free radicals

Chemical mechanical polishing (CMP) is a crucial manufacturing process for diamond substrate applications. However, due to the extremely high hardness and chemical stability of diamond, its CMP efficiency is extremely low. This study aims to achieve microscopic simulation of atomic oxidation removal at the three-phase interface between diamond abrasive particle, diamond substrate, and hydroxyl free radicals (∙OH) aqueous solution. The mechanical activation behavior, microscopic mechanism, and feasibility of elementary reactions in the ∙OH aqueous solution environment was studied using various perspectives of radial distribution function, central atomic coordination state, atomic bonding and removal forms, energy, electron orbitals, and density functional theory (DFT). The simulation results indicate that during the process of diamond atomic oxidation removal, the atomic density at the first adjacent position centered on one atom decreases, and the stable covalent bond structure is disrupted, resulting in an amorphous phase transition. The chemical adsorption reaction generates C-O and C–H bonds. The C atoms mainly separate from the diamond substrate by the forming products such as carbon monoxide (CO), carbon dioxide (CO2), and carbon chains. The mechanical activation behavior indirectly reduces the activation energy of chemical reactions, while increasing the absolute value of adsorption energy and improving the ability of chemical adsorption solution atoms H and O, as well as ∙OH groups. Based on DFT, it has been verified that the intrusion process of ∙OH groups in the elementary reactions involving the typical product C*O2 is an exothermic reaction that can occur spontaneously, and the energy barrier needs to be overcome by the mechanical action of abrasive particles. At the same time, the energetics of the oxidation of diamond C atoms to generate C*O2 have successfully confirmed that the combined action of ∙OH and diamond abrasive particles is expected to achieve efficient oxidation removal and finishing polishing of diamond atoms.

Increasing LNAPL density and viscosity are indicators of Natural Source Zone Depletion

Natural source zone depletion (NSZD) acts to reduce the mass and/or toxicity of light non-aqueous phase liquids (LNAPL) in the shallow subsurface. Several indirect measurement techniques are commonly used to estimate LNAPL mass depletion based on CO 2 generation by hydrocarbon mineralisation, heat production by exothermic biodegradation processes, and sub-surface gas concentration gradients. This paper presents data on LNAPL density and viscosity and shows changes that result from NSZD processes. Increasing trends in LNAPL density and viscosity were observed that provided a qualitative line-of-evidence for NSZD. When LNAPL density and viscosity were combined with contemporaneous LNAPL chemistry analysis it was possible to correlate changes in the physical properties to depletion of alkanes from the LNAPL in a manner that would inform a quantitative NSZD assessment. LNAPL density and viscosity measurements are relatively cheap and reproducible, and increasing trends in LNAPL density and viscosity provide additional lines-of-evidence for NSZD.