Exfoliation Of Nanoparticles Research Articles

Characterization and application of the nanocompiste packaging films containing clay and TiO2 on preservation of tomato fruit under cold storage

BackgroundTomato (Lycopersicon esculentum), a valuable economic crop worldwide, often goes to waste due to improper packaging and handling. In the present study, three types of low-density polyethylene nanocomposite films containing 3% clay (Closite 20A), 3% TiO2 nanoparticles, and their combination were synthesized using melt blending method, and evaluated on the quality parameters of tomato fruit during 42 days of storage at 4 °C.ResultsTransmission electron microscopy confirmed the degree of dispersion and exfoliation of the nanoparticles. The TiO2/clay-nanocomposite films exhibited notable enhancements in Young's modulus and tensile strength compared to conventional films. The addition of clay and TiO2 nanoparticles resulted in reduced permeability to CO2, O2, and water vapor. Fruits packed with clay/TiO2 nanocomposite films showed decreased ethylene production, mitigated weight loss, and maintained pH, titratable acidity, total soluble solids, and firmness. Furthermore, clay/TiO2 nanocomposite films enhanced membrane stability, decreased membrane lipid peroxidation, and enhanced catalase and ascorbate peroxidase enzyme activity in fruits.ConclusionsThe relatively good exfoliation of clay nanoparticles and the proper dispersion of TiO2 nanoparticles, which were confirmed by TEM, led to an increase in mechanical and physical properties in the Clay/TiO2 nanocomposite. This film displayed more potential in maintaining the quality properties of tomato fruit during cold storage. Therefore, this film can be considered a practical solution for minimizing pathogen risks and contamination, and enhancing the overall quality of tomato fruit.

Effect of graphene nanoplatelets and montmorillonite nanoclay on mechanical and thermal properties of polymer nanocomposites and carbon fiber reinforced composites

Multifaceted effects of Graphene Nanoplatelets (GNP) and Montmorillonite Nanoclay (MMT) reinforcement on mechanical and thermal properties of DGEBA epoxy resin nanocomposites were investigated. Multi-step dispersion techniques involving ultrasonication, shear mixing and magnetic stirring were used to disperse nanoparticles. Impact on thermal properties was investigated via Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA), while mechanical properties were studied using Tensile and Three-point flexure tests. Graphene sheets were instrumental in increasing modulus and strength at a very low percentage whereas nanoclay was helpful in preserving thermal stability of the matrix thus creating a synergistic effect to reflect the reinforcing ability of both GNP and MMT in mechanical and thermal aspects respectively. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) studies showed mixed intercalation and exfoliation of nanoparticles with increased inter-planar spacing and decrease in intensity of crystal peaks. SEM micrographs of failed samples revealed failure mechanisms and the aid of GNP to resist failure. To further investigate the effect of binary nano-reinforcement, hybrid Carbon Fiber Reinforced Polymer (CFRP) samples were fabricated and tested for mechanical properties via Tensile and Flexural tests. The mode of failure was analyzed by SEM imaging. It was confirmed that GNP reinforcement helped in increasing the mechanical properties of material.

Synthesis of clay–TiO2 nanocomposite thin films with barrier and photocatalytic properties for food packaging application

ABSTRACTIn this study, low‐density polyethylene (LDPE) nanocomposite films with two types of nanoparticles, TiO2 (3 wt %) and Closite 20A (3 and 5 wt %), were prepared using a melt blow extrusion as an industrial method and their properties such as mechanical properties, water vapor, oxygen and carbon dioxide gas barrier, and antimicrobial activity were tested. Transmission electron microscopy (TEM) and X‐ray diffraction (XRD) were also performed to determine the degree of dispersion and exfoliation of nanoparticles. Mechanical test indicated that the reinforcement in the presence of the nanocomposites was more than that with their conventional counterparts, and the highest stiffness was achieved in a sample containing 5 wt % clay and 3 wt % TiO2. Exfoliation of silicate layers and a good dispersion of TiO2 nanoparticles in LDPE were achieved as confirmed by XRD and TEM. The gas barrier properties were improved after formation of the nanocomposites especially by insertion of 5 wt % of clay nanoparticles as a filler in the LDPE matrix. The photocatalytic effect of the nanocomposite film was carried out by antimicrobial evaluation against Pseudomonas spp. and Rhodotorula mucilaginosa and by ethylene removal test using 8 W ultraviolet (UV) lamps with a constant relative intensity of 1 mW cm−2. The greatest effects were recorded by combining UVA illumination and active film. It was also proven that the photocatalyst thin film with improved barrier properties prepared by extrusion could be used in horticultural product packaging applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41764.

Fatigue behaviour of nanoclay reinforced epoxy resin composites

Nanoparticle filling is a feasible way to increase the mechanical properties of polymer matrices. Abundant research work has been published in the last number of years concerning the enhancement of the mechanical properties of nanoparticle filled polymers, but only a reduced number of studies have been done focusing on the fatigue behaviour. This work analyses the influence of nanoclay reinforcement and water presence on the fatigue behaviour of epoxy matrices. The nanoparticles were dispersed into the epoxy resin using a direct mixing method. The dispersion and exfoliation of nanoparticles was characterised by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Fatigue strength decreased with the nanoclay incorporation into the matrix. Fatigue life of nanoclay filled composites was significantly reduced by the notch effect and by the immersion in water.

Thermal degradation and stability of epoxy nanocomposites: Influence of montmorillonite content and cure temperature

The thermal behaviour and stability of epoxy nanocomposites were studied by thermogravimetric analysis (TGA). The nanocomposites consisted of a trifunctional epoxy resin, a hardener containing reactive primary amine groups and clay nanoparticles (i.e. montmorillonite), previously treated with octadecyl ammonium. Three levels of nanoclay content (0, 5 and 10%) and three temperature levels (120, 150 and 200 °C) were used. The exfoliation of nanoparticles within the material was analyzed by X-ray diffraction (XRD). The cure conversion was determined by Fourier transform infrared (FTIR) spectroscopy by selecting the suitable band for epoxide functional groups. The study demonstrated that the nanoclay greatly accelerates the cure, at the different cure temperatures studied. Finally, the thermal stability of the various nanocomposites was established by calculating various characteristic temperatures from thermograms as well as conversion and conversion derivative at maximum decomposition rate. The collisions between resin molecules, which are trapped within the nanoclay galleries, were less effective because they were protected against thermal degradation by the galleries. However, once the collision was effective, the thermal activation occurred more readily.