Generation Of Excess Pore Water Pressure Research Articles

Analysis of Offshore Wind Turbine by Considering Soil-Pile-Structure Interaction: Effect of Sea-Wave Load Duration

ABSTRACT Offshore Wind Turbines (OWTs) confront different types of environmental loads during their lifetime. One of the most significant loads is the cyclic sea-wave load which affects the OWT system during the approximate 25 years of design life. This lateral cyclic load can influence the response of the OWT system because of accumulated permanent displacement and excess pore water pressure generation in soil. This procedure can change pile-soil stiffness. However, the behavior of OWT and its foundations is mostly studied under short-term cyclic loading, and the effects of duration of the cyclic loads on pile-soil interaction and performance of the foundation are not well understood and documented. Therefore, there is a lack of guidance in codes for the duration effects of cyclic loads on the structural and geotechnical response of OWTs. In this regard, the current study considers the effects of duration of the cyclic loads on serviceability and performance of the OWT system by considering soil-foundation-structure interaction using a 2-D finite element method. The behavior of the OWT system is evaluated based on the internal forces and deformation of the monopile foundation, shear strain, and excess pore water pressure ratio in the surrounding soil. Besides, liquefaction susceptibility in the sandy soil layer at the vicinity of the monopile and its effect on the performance of the foundation is investigated. Finally, the results can provide guidance on estimation of the dynamic performance of the OWT system during long-term cyclic loads. They can be used to specify the need for consideration of the duration of cyclic lateral loads for the design of OWT structures.

Excess pore water pressure generation in poorly graded sands with varying particle shapes and relative densities

In this study, a series of cyclic triaxial tests were conducted on two poorly graded sands with different particle shapes. The experimental results were integrated with test results reported in the literature to construct a comprehensive database for investigating the effects of particle shape and relative density on excess pore water pressure (EPWP) generation. The sand types in the database were divided into three groups based on the particle shape: subrounded, subangular, and angular. The test results showed that the particle shape and relative density influenced the axial strain development and EPWP generation during undrained cyclic loading. As the relative density increased, the effect of the particle angularity on the shape of the EPWP generation curves decreased. The normalized EPWP generation curves of the subangular particles (C306 sand) exhibited a strong dependence on the relative density. However, the angular and subrounded particles exhibited a weaker influence than the subangular particles on EPWP change for different relative densities. A model was established to predict the EPWP generation with variations in the particle shape and relative density.

An Experimental Study on Excess Pore-Water Pressure Generation of a Poorly Graded Sand Using Combined RCTS Device

Abstract The combined dynamic torsional resonant column and cyclic torsional shear (RCTS) device is employed to study the generation of excess pore-water pressure, especially the threshold shear strain of excess pore-water pressure, γtPP, in an uncemented poorly graded granular soil. Reconstituted specimens of uncemented sand were constructed under water and then tested in the RCTS device using a newly designed base pedestal, with which pore-water pressure is measured at four points systematically located at 0.75 times the radius of the base pedestal. Specimens were tested under different mean effective confining pressures, and all specimens had B-values above 0.95 at the start of testing. During testing, the excess pore-water pressure was measured continuously during 30 cycles of loading at multiple increasing loading levels. The three major factors influencing γtPP that were investigated are as follows: (1) mean effective confining pressure, (2) relative density, and (3) loading frequency. The results are presented in terms of the following: (1) excess pore-water pressure ratio versus shear strain, and (2) threshold shear strain versus number of loading cycles. Other related behaviors such as softening during cycling and post-cyclic moduli changes are also discussed.

Influences of particle size distribution and fines content on the excess pore water pressure generation of sand-silt mixtures under cyclic loading

The mechanical behaviors of binary mixtures are different from that of uniform soils. However, experimental studies on the dynamic responses of sand-silt mixtures considering the combined effects of fines content (FC) and host sand gradation are limited in the literature. In this paper, an experimental program was designed concerning five binary mixtures with three grain size ratios (Rd) and three sand uniformity coefficients (Cus) for investigating the effects of fines content and host sand gradation on both the liquefaction resistance and the excess pore water pressure (EPWP) generation of sand-silt mixtures. Results show that the effect of FC on the liquefaction resistance of sand-silt mixtures depends on relative density (Dr), grain size ratio, and sand uniformity coefficient. The liquefaction resistance of sand-silt mixture can be uniquely characterized by the equivalent relative density Dr* regardless of FC, Dr, and host sand gradation. Relationship between the EPWP ratio Ru and the cycle ratio N/NL for the sand-silt mixtures can be well expressed by the Seed model, which is significantly affected by cyclic stress ratio (CSR), FC, and Dr but insensitive to the change of host sand gradation. A trained artificial neural networks (ANN) model is conducted to predict the fitting parameter β of the Seed model with a maximum difference of 25% between the predicted and measured values. Moreover, there is an arctangent relationship between Ru and shear strain amplitude γa of each specimen, and the fitting parameter A for the relationship is sensitive to the particle size distribution and stress amplitude. A unique relationship between a density-corrected parameter A/Dr* and CSR is proposed regardless of FC and host sand gradation.

A DEM Investigation on the Influence of Cyclic and Static Stress Ratios and State Variables on the Pore Water Pressure Generation in Granular Materials

A granular soil may undergo liquefaction failure due to excess pore water pressure (Δu) generation when subjected to cyclic loading such as an earthquake. Several past studies indicated Δu generation may be independent of cyclic stress ratio (CSR), whereas others contradicted this observation. A soil element in its natural state often remains in K0 consolidation state, i.e., subjected to nonzero static shear stress ratio (SSR). Using the discrete element method (DEM), this study performs a large number of cyclic triaxial tests and evaluates various factors influencing the magnitude and rate of Δu generation under symmetric and nonsymmetric cyclic loading conditions. The study also evaluates the capabilities of several existing Δu generation models to predict the development of Δu under different failure scenarios. It was observed that the generation of Δu can be influenced by CSR for specimens subjected to symmetrical cyclic loading and by both CSR and SSR for nonsymmetric cyclic loading conditions. A new prediction model for Δu generation was developed along with an objective framework to estimate its input parameters. The model showed good agreement with the DEM simulation results.

Integrated effects of inherent and induced anisotropy on reliquefaction resistance of Toyoura sand with different strain histories

Recent earthquakes in New Zealand and Japan showed that pre-shaking histories significantly affected the reliquefaction resistance of soils. In this study, a series of experimental tests was conducted to elucidate the coupled effects of inherent and induced anisotropy on reliquefaction resistance of Toyoura sand, which have not been studied before. Accordingly, loose and dense Toyoura sands were prepared with two different methods: dry deposition and moist tamping. The specimens were sheared cyclically using a hollow cylinder torsional shear apparatus under various cyclic stress ratios up to different residual shear strains (γres) and reconsolidated at different states. The experimental results were assessed from various perspectives, including stress–strain relationships, failure mechanisms, liquefaction/reliquefaction resistance, excess pore water pressure (EPWP) generation and compressibility in conjunction with micromechanical interpretations. It was shown that fabric evolution affects the reliquefaction characteristics of Toyoura sand substantially. Interestingly, a unique correlation exists between EPWP and shear strain accumulation for all tests. An energy-based model was developed to uniquely correlate the dissipated energy with the cyclic resistance based only on residual shear strains; this model shows great promise to develop a unified, energy-based criterion for quantifying the liquefaction/reliquefaction resistance of soils with different fabrics.

Excess pore water pressure generation in fine granular materials under undrained cyclic triaxial loading

Understanding the mechanism of excess pore water pressure generation in subgrades is essential for not only designing but also further maintenance purposes. The primary goal of this research was to investigate excess pore water pressure generation in fine granular materials under cyclic loading. A series of undrained cyclic triaxial tests were performed to study the excess pore water pressure generation in two selected fine granular materials: (1) railway sand and (2) tailings. The excess pore water pressure response of these materials was evaluated in terms of density conditions, number of cycles, and applied cyclic stress ratios (CSR). As a result, excess pore water pressure accumulated over time due to cyclic loading. However, its accumulation was significantly dependent on the governing factors, i.e., densities, CSR values, and material types. The excess pore water pressure exhibited a slight increase at low CSR values, but a sharp increase was observed at higher CSR values, which ultimately led to a failure state after a certain number of cycles. In addition, under the same loading conditions, the samples that had higher relative compaction showed better resistance to cyclic loads as compared to those with lower relative compaction. Finally, a relationship between excess pore water pressure and cyclic axial strain of the fine granular materials was discovered.

Excess pore water pressure generation in saturated sandy soils subjected to various cyclic stress paths

Excess pore water pressure (EPWP) plays an essential role in determining the cyclic undrained behavior of saturated sandy soils. The influence of cyclic stress paths on the EPWP generation in saturated sandy soils has emerged as an interesting issue in recent years. By using a hollow cylinder torsional shear apparatus, this paper presents the results of a systematic experimental study on the isotropically consolidated undrained responses of saturated coral sand under the 90° jump rotation of cyclic principal stresses with various orientations. Laboratory cyclic tests showed that the patterns of EPWP generation in saturated coral sand exhibits three modes that are related to the patterns of cyclic loading and levels of cyclic stress. Moreover, the unit cyclic stress ratio (USR) defined by Chen et al. (2020) can be used as an index for distinguishing among the three modes of EPWP generation under varying cyclic loadings. Furthermore, a unique form of the relationships exists among the EPWP ratio (ru), USR, and cycle ratio (N/NL) for all cyclic loading paths considered. Following this, we propose a model for the generation of ru as a function of the USR and N/NL for application. The wide applicability of this model is validated by using independent experimental data on four siliceous sandy soils in this study and from the literature.

Evaluating Finn-Byrne Model in Liquefaction Analysis of Quay Wall and Cantilevered Retaining Wall Models

Two centrifuge tests on a quay wall and a cantilevered retaining wall with saturated granular backfills were simulated using Finn-Byrne model. Capabilities of Finn-Byrne model in liquefaction analysis of the quay wall and the cantilevered retaining wall were evaluated. The quay wall model subjected to a horizontal acceleration time history and the cantilevered retaining wall model subjected to a horizontal and a vertical time history. The constitutive model is a linear elastic – perfectly plastic model. Hooke’s elasticity and Mohr-coulomb criterion for the yield surface were assumed for the backfill material behavior. The excess porewater pressure generation, acceleration, wall lateral displacement, lateral earth pressures, deformation pattern, and backfill settlements were monitored and compared with centrifuge tests’ results. The results showed that the adopted model is suitable for stability and displacement analyses of the quay walls and cantilevered retaining walls. However, a care should be taken when assessing the backfill settlements and dynamic earth pressure behind the wall stem. The rest of the results showed a good agreement with the centrifuge tests’ results.

Excess Pore Water Pressure Generation, Distribution and Dissipation in Self-boring Pressuremeter Test: Numerical Analysis

Excess Pore Water Pressure Generation, Distribution and Dissipation in Self-boring Pressuremeter Test: Numerical Analysis

LEAP-UCD-2017 and additional tests at NCU

In this study, three centrifuge modeling tests related to the Liquefaction Experiment and Analysis Projects were conducted. Test models were prepared in a rigid-wall container with a length, central height, and sand slope of 20 m, 4 m, and 5°, respectively, in the prototype scale. Two additional centrifuge modeling tests with different sand materials were carried out to obtain more information. The results of these two tests showed that the properties of the two sand materials were similar; however, different grain sizes of sand particles with the same relative density or void ratio affected the behavior of the saturated sand slope during seismic shaking. Furthermore, a series of experiments were conducted to evaluate the applicability and performance of a fiber Bragg grating pore pressure transducer as an alternative method for pore pressure measurement. • Different particle size sands with the same relative density have different excess pore water pressure generation behavior. • The sample with a larger soil particle grain size but the same void ratio is less compressive when shearing. • The FBG-pore-pressure-transducer can effectively measure static pressures and is insensitive to total stresses.

Responses of Laterally Loaded Single Piles Subjected to Various Loading Rates in a Poroelastic Soil

Groundwater table has an important role in soil–structure interaction problems. However, analysis of laterally loaded single piles has often been conducted by solely considering the mechanics of the soil skeleton or decoupling the interactive mechanics of the soil skeleton and the fluid flux; in other words, most analyses were performed without taking into consideration the coupling effect between the soil skeleton and the fluid flux. To improve our understanding of the hydromechanical coupling effect on laterally loaded single piles, a series of finite element study on laterally loaded single piles in saturated porous media was conducted. The effect of pile cap geometries, cap widths, cap embedment depths, and pile lengths, on the response of laterally loaded single piles was also studied. The loading condition of the pile was found to have a significant effect on the generation of excess pore-water pressure. The lateral displacement and bending moment computed at the maximum excess pore water pressure, which in turn, is equivalent to an undrained analysis, produced the minimum responses among all the other loading conditions. The effect of pile cap geometries was found to be much less significant than anticipated.

An experimental evaluation of helical piles as a liquefaction-induced building settlement mitigation measure

This study evaluates the application of helical piles to reduce liquefaction-induced foundation settlement and investigates their seismic performance in liquefiable grounds. Two large-scale shake table test series, one without mitigation and one using helical piles, were conducted using the shake table facility at the University of California, San Diego. Each model was extensively instrumented and subjected to two consistently applied shaking sequences. The experimental results indicated reduced excess pore-water pressure generation around the helical pile group, attributed mainly to the densification around the piles during installation. The foundation supported on helical piles underwent almost no foundation differential settlement and tilt. The post-shaking liquefaction-induced settlement mechanisms did not affect the helical pile foundation settlement. Although this study introduced helical piles as a reliable and highly efficient measure to mitigate liquefaction-induced foundation tilt and settlement, the proper design and application of helical piles still need thorough investigation due to possible amplified superstructure response.

Liquefaction and post-liquefaction resistance of sand reinforced with recycled geofibre

The present study provides an insight into the effect of recycled carpet fibre on the mechanical response of clean sand as backfill material subjected to monotonic loading and cyclic loading as well as post-liquefaction resistance of both unreinforced and carpet fibre reinforced soils. To achieve these goals, a series of multi-stage soil element tests under cyclic loading event resulting in liquefaction followed by undrained monotonic shearing without excess pore water pressure dissipation as well as a series of monotonic undrained shear test is conducted. All the specimens are isotropically consolidated under a constant effective confining stress of 100 kPa by considering the effect of cyclic stress ratio and carpet fibre content ranging from 0.25% to 0.75%. The obtained results revealed the efficiency of carpet fibre inclusion in increasing the secant shear modulus and ductility of clean sand under monotonic shearing without previous loading history. The impact of carpet fibre inclusion on the trend of cyclic excess pore water pressure generation and cyclic stiffness degradation was minimal. However, adding carpet fibre significantly improved both liquefaction and post-liquefaction resistances of clean sand. The liquefaction resistance of clean sand, at a constant 15 loading cycles, improved by 26.3% when the soil was reinforced with 0.75% recycled carpet fibre. In addition, the initial shear modulus of the liquefied specimen significantly increased by adding recycled carpet fibre.

Long-term dynamic bearing capacity of shallow foundations on a contractive cohesive soil

The calculation of the long-term dynamic bearing capacity arises from the need to consider the generation of maximum pore-water pressure developed from a cyclic load. Under suitable conditions, a long-term equilibrium situation would be reached, when pore-water pressures stabilized. However, excess pore-water pressure generation can lead to cyclic softening. Consequently, it is necessary to define both the cohesion and the internal friction angle to calculate the dynamic bearing capacity of a foundation in the long term, being necessary to incorporate the influence of the self-weight of soil and therefore the width of the foundation. The present work is based on an analysis of the results of cyclic simple shear tests on soil samples from the port of El Prat in Barcelona. From these experimental data, a pore-water pressure generation formulation was obtained that was implemented in FLAC2D finite difference software. A methodology was developed for the calculation of the maximum cyclic load that a footing can resist before the occurrence of the cyclic softening. The type of soil studied is a contractive cohesive soil, which generates positive pore-water pressures. As a numerical result, design charts have been developed for long-term dynamic bearing capacity calculation and the charts were validated with the application of a real case study.

Study on the Correlation between Soil Consolidation and Pile Set-Up Considering Pile Installation Effect

In saturated fine-grained soil, the development and dissipation of excess pore water pressure (EPWP) during and after pile jacking change the effective stress of the surrounding soil, and thereby affect the pile set-up. In this paper, the entire process of steel-pipe pile jacking (the installation process and the subsequent consolidation phase) is simulated with three-dimensional (3D) finite element models, considering the pore water effect. After the model verification, a comprehensive numerical analysis was performed to investigate the development and dissipation of EPWP, changes in soil stress state, and the side shear resistance of pile with time after installation. On this basis, not only the influence of ks, cu, E, and OCR on EPWP generation during pile jacking and subsequent soil consolidation effect after pile installation but also the correlation between pile set-up and EPWP dissipation is investigated.

Consolidated Undrained Monotonic Shearing Response of Hydrophobic Kızılırmak Sand

Geotechnical properties of hydrophilic (wettable) sands have been widely discussed in the literature. However, sands may gain hydrophobic (non-wettable) properties after being exposed to a hydrophobic agent in the nature. The number of available studies regarding the response of hydrophobic sands is very limited, and mostly focus on their environmental and hydrological aspects. To close this gap, a controlled laboratory testing program, consisting of 18 monotonic strain-controlled consolidated undrained triaxial shear tests, was designed. Tests were performed on fully saturated hydrophilic and hydrophobic re-constituted Kızılırmak sand samples of different relative densities with pore water measurements. Hydrophobic samples were prepared by using 1 and 2 % WD-40 lubricant by mass. The effect of hydrophobic agent was assessed by comparing the stress – excess pore water pressure - strain responses of hydrophobic sand samples with those of conventional (hydrophilic) sand samples. Test results revealed that addition of hydrophobic agent increases the dilatancy of sands at low confining stresses (~100kPa) by decreasing the excess pore water pressure generation. At higher confining stresses (~400kPa) this effect is less pronounced. Moreover, the addition of hydrophobic agent up to 2% by mass does not systematically and significantly change the effective angle of shearing resistance of sand samples, independent of their initial relative density and confining stress levels.

A new effective stress method for nonlinear site response analyses

AbstractA generic loosely coupled effective stress method is presented in this article for one‐, two‐ and three‐ dimensional (1D, 2D and 3D) nonlinear site response analyses. In this method, the 1D non‐Masing hysteretic constitutive model of Chen et al (2020) is extended into 2D and 3D stress conditions, by presenting a clever generalized formulation of equivalent shear strain (γeq). The element‐level simulation tests show that the proposed algorithm of γeq is conceptually simple with high precision to capture the strain reversals under complex multidirectional shakings. The coupling between the cyclic stiffness degradation and the excess pore water pressure (EPWP) generation during irregular cyclic loadings is established using the proposed algorithm of γeq in conjunction with the Chen et al (2019a) EPWP generation model and the extended non‐Masing hysteretic constitutive model. The simulations of the undrained cyclic triaxial tests using the new effective stress method reproduce excellently the observed response of the saturated sand specimens, demonstrating the ability to represent the undrained behavior of liquefiable sands during uniform cyclic loadings. The new effective stress method is then used to simulate the response of a downhole array liquefied site in Japan, which shows an excellent agreement between the simulations and the recordings in both horizontal and vertical components of ground motions at different depths.

Assessing Persistence of Entrapped Gas for Induced Partial Saturation

AbstractInduced partial saturation (IPS) is a novel method to suppress the generation of excess pore-water pressure and increase the liquefaction resistance of loose granular soils. Mechanical bene...

Cyclic performance of a monopile in spatially variable clay using an advanced constitutive model

The performance of monopiles in cohesive soils is of great interest for future offshore wind farm developments, particularly under the cyclic loads experienced in the ocean environment. Clay behaviour during undrained cyclic loading is complex and involves the accumulation of plastic strains, generation of excess pore-water pressures and degradation of initial stiffness. In this paper, the cyclic performance of a laterally-loaded monopile in spatially variable clay is investigated for the first time. A kinematic hardening constitutive model is used in a 3D finite element analysis to capture the hysteretic stress-strain behaviour of the clay. The monopile is installed in overconsolidated London Clay, which is present at several offshore wind farms in the Thames Estuary. The finite element model is coupled with random field representations of initial stiffness and clay structure. The statistical characterisation of the random fields was undertaken considering parameter ranges observed in laboratory tests. Under one-way cyclic loading, the monopile showed ratcheting behaviour, where pile rotation accumulates with increasing numbers of load cycles. The cyclic secant stiffness also increased due to the generation of negative excess pore-pressures in the clay. This behaviour occurred in both homogeneous and spatially variable clay. The monopile was also subjected to an extreme dynamic event and the soil response around the monopile showed increasing variability in stress-strain response and generation of excess pore-water pressure over time as plastic strain accumulated. However, the overall behaviour of the foundation was governed by a spatial average of the mobilised clay. The range in monopile response demonstrates how the natural spatial variability of clay can have a strong influence on monopile performance.