Excellent Antibacterial Effect Research Articles

Protective effects of Bacillus velezensis on texture, physicochemical properties, and lipid oxidation of grass carp fillets during repeated freeze-thaw cycles.

Probiotics have excellent antioxidant and antibacterial effects and are also considered to be promising natural biological preservatives. This study examined the freeze-thaw stability of the antioxidant and antibacterial activity of probiotic Bacillus velezensis PJP10, and evaluated the effect of different concentrations of PJP10 (106, 107, and 108 CFU mL-1) on microbial growth, textural characteristics, physicochemical properties, and lipid oxidation of grass carp fillets during repeated freeze-thaw cycles. Freeze-thaw cycles had little effect on the antioxidant and antibacterial stability of PJP10. Treatment with the PJP10 strain slowed effectively the increase in Aeromonas spp. counts (ASC), pH, total volatile basal nitrogen (TVB-N), and thiobarbituric acid (TBA) values of the freeze-thaw fish fillets. It maintained the textural quality of fillets, inhibiting the reduction of hardness, springiness, gumminess, cohesiveness, chewiness, and resilience values, and reduced lipid oxidation, as evidenced by decreased carbonyl values and conjugated diene values after multiple freeze-thaw cycles. Probiotic B. velezensis PJP10 had protective effects on microbiological, textural, and physicochemical properties, and lipid oxidation of grass carp fillets during repeated freeze-thaw storage, suggesting a potential application of this strain in the freeze-thaw preservation of freshwater fish. © 2024 Society of Chemical Industry.

Preparation and properties of polytetrafluoroethylene/zinc oxide antibacterial filaments

AbstractThe potential of polytetrafluoroethylene (PTFE) products as surgical dressings is considerable, yet their absence of antibacterial properties substantially restricts their medical applications. To enhance the utility of PTFE in the medical sector, this research loaded nano zinc oxide (ZnO) particles into the PTFE filament matrix through a wet spinning process. This approach successfully yielded PTFE/ZnO composite filaments with antibacterial properties. The characterization results of the filaments show that when the mass ratio of PTFE to ZnO is 8:1, the filament has the best mechanical performance with a tensile strength of 6.78 MPa and an elongation at break of 274.46%. At the same time, composite antibacterial filaments under different process conditions show excellent antibacterial effects against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), with an antibacterial rate of over 99%. The excellent mechanical properties ensure the ability to further process single filaments, which can be woven into fabrics, textiles, and various other products. Therefore, the composite antibacterial filaments with excellent comprehensive performance prepared in this study are expected to be applied in the field of medical fabrics.Highlights Provide new solution ideas for functional PTFE composite filaments preparation. The prepared PTFE/ZnO composite filament has good acid and alkali resistance as well as excellent antibacterial properties, which is expected to broaden the application field of PTFE filaments.

Rapid and Simultaneous Determination of 13 Sulfonamides in Soil by Matrix Solid-Phase Dispersion With High-Performance Liquid Chromatography-Tandem Mass Spectrometry.

Sulfonamides, the most frequent antibacterial agent, are widely used due to their low cost and excellent antibacterial effect. With the emergence of the environment, the potential hazard to the ecological environment has attracted the great attention of humans. Based on matrix solid-phase dispersion coupled with high-performance liquid chromatography-tandem mass spectrometry, an accurate, fast, and sensitive analytical method was developed for the determination of sulfonamides (SAs) in soil. Several influencing factors including the type of dispersants, the ratio of sample-to-sorbent, eluents, and solvent volume were investigated, and the matrix effects were evaluated. Under optimized conditions, the calibration curves exhibited excellent linearity with correlation coefficients (r) exceeding 0.996. The limit of detection (based on signal-to-noise ratio [S/N]=3) and limit of quantification (based on S/N=10) were 0.024-0.058 and 0.079-0.195µg/kg, respectively. The recoveries ranging from 70.12% to 123.63% were obtained with a relative standard deviation of less than 15% at three levels (20, 40, and 200µg/kg). The developed method was successfully applied to analyze 13 SAs at trace levels in a real soil sample. This proposed method would be an alternative and suitable for routine application in the future owing to its rapidity, sensitivity, and affordability.

Physically crosslinked chitosan/αβ–glycerophosphate hydrogels enhanced by surface-modified cyclodextrin: An efficient strategy for controlled drug release

This study reports physically crosslinked chitosan/αβ–glycerophosphate (CS/GP) hydrogels containing surface-modified cyclodextrin for efficient controlled drug release. Highly water-soluble β–cyclodextrin-grafted L–serine (CD–g–Ser) compounds were synthesized, and employed as an effective carrier of berberine hydrochloride (Ber) for CS/GP hydrogels. Various characterizations, including gelation time determination, scanning electron microscopy, and viscosity measurement, indicated that the introduction of CD–g–Ser led to increased crosslinking degree, improved temperature sensitivity, and shortened sol–gel phase transition time of the hydrogel. Meanwhile, the sustained release ability for Ber was achieved due to the hydrophobic association between cyclodextrin and Ber. It was observed that within 4 h, the hydrogel containing CD–g–Ser released 40 % of Ber, while the CS/GP hydrogel without CD–g–Ser released 65 % of Ber. Furthermore, in vitro bacteriostasis experiments confirmed the drug-loaded hydrogel had an excellent antibacterial effect against E. coli and S. aureus (diameter of the inhibition zone up to (16.4 and 34.7) mm, respectively), low hemolysis rate (<2 %), and high cell viability (>90 %). The findings indicate that the physical crosslinked CS hydrogel can be used as a new drug delivery system, and its excellent antibacterial effect makes it a potential wound dressing candidate.

Photocatalytic rice bran protein/carboxymethyl cellulose/ZrO2 fiber produced by microfluidics: Formation mechanism, bacteriostasis and strawberry preservation

Developing cost-effective and environmentally sustainable active packaging materials remains an important challenge. We have developed rice bran protein (RBP)-based fibers incorporating carboxymethyl cellulose (CMC) and ZrO2 nanoparticles (ZrO2 NPs, 0 %–7 %, m/m) using microfluidic spinning. The integration of RBP, CMC, and ZrO2 NPs formed a robust hydrogen bond network that enhanced the fibers' thermal stability and crystallinity, reduced surface hydrophobicity, and aligned the molecular orientation. Under the catalysis of visible light (300 W, 12 h), ZrO2 NPs in the fiber produced reactive oxygen species, which inhibited the oxidative stress resistance system of Bacillus subtilis and destroyed its biofilm and DNA, thus showing excellent antibacterial effect. Additionally, during storage, this fiber also showed the ability to scavenge ethylene, thereby reducing the rate of loss of luminance, hardness and weight of strawberries. This study offers a new idea for RBP fiber in food preservation, antibacterial, and value-added utilization of rice bran by-products.

Characterization of corn starch/chitosan composite films incorporated with amino-, carboxyl- and hydroxyl-terminated hyperbranched dendrimers: A comparative study

Bio-based materials are gaining traction as sustainable plastic replacements, but their performance in terms of mechanics, antibacterial action, and water resistance is often subpar. Our research sought to enhance these attributes by integrating nanoscale dendrimers into a starch/chitosan (SC) matrix. We introduced three varieties of dendrimers—amino-, carboxyl-, and hydroxyl-terminated—at a modest 2.5 % w/w concentration to fabricate NSC, CSC, and HSC films. Comprehensive analyses revealed that the dendrimers fostered intermolecular interactions, prompting an order-disorder shift in the matrix. This interaction textured the film surface and bolstered its thickness, opacity, and tensile strength. The HSC films achieved the highest tensile strength (9.96 MPa) and substantial elongation (254.30 %), attributed to their more disordered structure. The HSC films also showcased enhanced thermal stability and reduced moisture absorption. Notably, NSC films exhibited excellent antibacterial effects against S. aureus and E. coli. The performance improvement of CSC film is mediocre. This study underscores the promise of dendrimer-fortified SC films in the realm of biodegradable materials.

Multienzyme-mimic Fe single-atom nanozymes regulate infection microenvironment for photothermal-enhanced catalytic antibacterial therapy

The rational design of nanozymes with highly efficient reactive oxygen species (ROS) generation to overcome the resistant infection microenvironment still faces a significant challenge. Herein, the highly active Fe single-atom nanozymes (Fe SAzymes) with a hierarchically porous nanostructure were prepared through a colloidal silica-induced template method. The proposed Fe SAzymes with satisfactory oxidase (OD)-like and peroxidase (POD)-like activity can transform O2 and H2O2 to superoxide anion free radical (•O2-) and hydroxyl radical (•OH), which possess an excellent bactericidal effect. Also, the glutathione peroxidase (GPX)-like activity of Fe SAzymes can consume glutathione in the infection microenvironment, thus facilitating ROS generation to enhance the sterilization effect. Besides, the intrinsic photothermal effect of Fe SAzymes further significantly boosts the enzyme-like activity to generate much more reactive oxygen species for efficient antibacterial therapy. Accordingly, both in vitro and in vivo results indicate that the Fe SAzymes with synergistically photothermal-catalytic performances exhibit satisfactory antibacterial effects and biocompatibility. This work provides new insights into designing highly efficient SAzymes for effective sterilization applications by an amount of ROS generation.

Construction and Performance Study of an Injectable Dual-Network Hydrogel Dressing with Inherent Drainage Function.

With the widespread utilization of moist wound dressings, the extended healing time and increased risk of wound infection caused by excessively moist environments have garnered significant attention. The development of hydrogel dressings that can effectively control the wound moisture level and promote healing is very important. Inspired by the pore-opening perspiration effect of the skin, this study constructed an injectable dual-network hydrogel, CMCS-OSA/AG/MXene, by the composition of a dynamic covalent network of carboxymethyl chitosan and oxidized sodium alginate based on the Schiff base and hydrogen bond network of the thermosensitive low-melting-point agar with the advantage of the upper critical solution temperature (UCST) effect. Under near-infrared (NIR) light stimulation, the CMCS-OSA/AG/MXene hydrogel shows characteristics conducive to rapid removal of wound exudate while maintaining an appropriate moist environment for the wound and excellent antibacterial effects with its photothermal responses. The excellent conductivity of the hydrogel can also promote cell proliferation under external electrical stimulation (ES). Further validation through animal experiments on a full-thickness skin defect model demonstrates the excellent capability of CMCS-OSA/AG/MXene in accelerating wound healing. This work provides an innovative approach to the development of injectable hydrogel dressing materials with inherent drainage functionality and shows a new avenue to wound moisture control and wound healing promotion.

Endophytic Penicillium oxalicum AUMC 14898 from Opuntia ficus-indica: A Novel Source of Tannic Acid Inhibiting Virulence and Quorum Sensing of Extensively Drug-Resistant Pseudomonas aeruginosa.

Pseudomonas aeruginosa is a harmful pathogen that causes a variety of acute and chronic infections through quorum sensing (QS) mechanisms. The increasing resistance of this bacterium to numerous antibiotics has created a demand for new medications that specifically target QS. Endophytes can be the source of compounds with antibacterial properties. This research is the first to examine tannic acid (TA) produced by endophytic fungus as a potential biotherapeutic agent. A novel endophytic fungal isolate identified as Penicillium oxalicum was derived from the cladodes of Opuntia ficus-indica (L.). The species identification for this isolate was confirmed through sequencing of the internal transcribed spacer region. The metabolites from the culture of this isolate were extracted using ethyl acetate, then separated and characterized using chromatographic methods. This led to the acquisition of TA, a compound that shows strong anti-QS and excellent antibacterial effects against extensively drug-resistant P. aeruginosa strains. Furthermore, it was shown that treating P. aeruginosa with the obtained TA reduced the secretion of virulence factors controlled by QS in a dose-dependent manner, indicating that TA inhibited the QS characteristics of P. aeruginosa. Simultaneously, TA significantly inhibited the expression of genes associated with QS, including rhlR/I, lasR/I, and pqsR. In addition, in silico virtual molecular docking showed that TA could efficiently bind to QS receptor proteins. Our results showed that P. oxalicum could be a new source of TA for the treatment of infections caused by extensively drug-resistant P. aeruginosa.

Antioxidant Activity and Other Characteristics of Lactic Acid Bacteria Isolated from Korean Traditional Sweet Potato Stalk Kimchi.

The aim of this study was to examine the biological activity and probiotic properties of lactic acid bacteria (LAB) isolated from sweet potato stalk kimchi (SPK). Various LAB and Bacillus spp. are active in the early stages of the fermentation of kimchi made from sweet potato stalk. Four strains of LAB were identified, including SPK2 (Levilactobacillus brevis ATCC 14869), SPK3 (Latilactobacillus sakei NBRC 15893), SPK8 and SPK9 (Leuconostoc mesenteroides subsp. dextranicum NCFB 529). SPK2, SPK3, SPK8, and SPK9 showed 64.64-94.23% bile acid resistance and 78.66-82.61% pH resistance. We identified over 106 CFU/mL after heat treatment at 75 °C. Four strains showed high antimicrobial activity to Escherichia coli and Salmonella Typhimurium with a clear zone of >11 mm. SPK2 had the highest antioxidative potentials, higher than the other three bacteria, with 44.96 μg of gallic acid equivalent/mg and 63.57% DPPH scavenging activity. These results demonstrate that the four strains isolated from sweet potato kimchi stalk show potential as probiotics with excellent antibacterial effects and may be useful in developing health-promoting products.

Efficacy of Eugenol Loaded Chitosan Nanoparticles on Sepsis Induced Liver Injury in Rats

Background: Sepsis is a life-threatening condition responsible for high morbidity and mortality rates around the world and is characterized by a dysregulated host response to infection, resulting in multiple organ dysfunctions. Eugenol is a phenolic aromatic compound derived from clove oil. It has anti-inflammatory, antioxidant, antibacterial, antiviral, antifungal, and anticancer characteristics, which have led to its extensive use in diverse fields, including cosmetology, medicine, and pharmacology. The ongoing study aimed to evaluate the efficacy of eugenol-loaded chitosan nanoparticles (EC-NPs) on sepsis-induced liver damage using the cecal ligation and puncture (CLP) model. Methods: Thirty male albino rats were randomly divided into five groups: Sham, sepsis, and septic rats treated with chitosan, eugenol, or EC-NPs. Results: EC-NPs showed excellent antibacterial, antioxidant, and anti-inflammatory effects in vitro. EC-NP administration significantly improved liver function, as indicated by the decreased liver enzyme activities and C-reactive protein (CRP) level, as well as the increase of albumin content. Moreover, EC-NPs caused an increase in glutathione-reduced and antioxidant enzyme activities, as well as a reduction of malondialdehyde and nitric oxide formation. In addition, the EC-NP treatment reduced the DNA damage in septic rats; also, the EC-NP treatment repaired, to some extent, the abnormal architecture of the hepatic tissues of septic rats. Furthermore, the immunohistochemical examination showed a marked decrease in inflammation through the reduction of TNF-α and IL-1β expression. Conclusion: In conclusion, EC-NPs attenuated liver injury in sepsis through its antiinflammatory, anti-bacterial, and anti-oxidant activities and protection of DNA.

All-day freshwater harvesting enabled by designing benzoxazine molecule with intrinsic photothermal conversion and radiation cooling ability

The importance of clean water resources for human health and economic development cannot be overlooked. Providing a way for fully passive all-day freshwater harvesting presents a significant challenge. Herein, we propose a strategy for all-day freshwater harvesting passively through a freestanding Janus film which combining solar-driven interfacial desalination during day time and dew water generation driven by passive radiative cooling at night. Specifically, the core of the strategy was a new bio-based benzoxazine which containing high-infrared emittance in the atmospheric window and the resultant cured black freestanding film owns a steady high light absorbance in the whole range of the solar irradiation wavelength. The home-made device made by the Janus film achieved a drinkable freshwater collection efficiency of 90.9 % when desalinating seawater under 1 sun illumination and achieved a dew water collection rate of 68.36 g m−2 day−1 at night. Moreover, the film has an excellent antibacterial effect, which ensures the quality of water collection and enhances the service life. Combining the advantages of bio-based raw materials, a simple fabrication process and scalability of the film, the all-day freshwater collection system makes a promising solution to alleviate freshwater shortage in many arid regions, islands and even boats sailing on the sea.

Stimuli-responsive sulfur-containing amino acid functionalized boron nitride nanosheets as nanocarriers via improved adhesion to enhance antibacterial performance against plant diseases

Bacterial wilt caused by Ralstonia solanacearum severely impacts agricultural production, urgently requiring effective control measures. Herein, we designed a strategy via boron nitride nanosheets with enhanced adhesion ability as nanocarriers to improve the antibacterial efficacy of active ingredients. To achieve this, we utilized three sulfur-containing amino acids (SAAs), including methionine (MET), cysteine (CYS), and cystine (CYST) for the simultaneously exfoliation and functionalization of boron nitride nanosheets (BNNS) through mechanochemical method, and compared their structure–activity relationship. The obtained BNNS-SAAs exhibited size around 160–250 nm and thickness near 1.5–2.0 nm. The presence of disulfide bond (S-S) within BNNS-CYS and BNNS-CYST promoted them with the responsiveness by redox stimuli. BNNS-CYST acquired highest functionalization degree of 63.44 % among three BNNS-SAAs. And tea tree essential oil (TTO) loading capacity within BNNS-SAAs was around 36.40–37.11 %. The existence of SAAs within BNNS significantly inhibited the volatilization of TTO via nanoconfinement effect fitting to Logistic model, specially, BNNS-CYST held with slowest release rate among the BN-based carriers, due to the stronger attachment or affinity. Furthermore, BNNS-CYST-TTO exhibited the most excellent synergistic antibacterial effect with the increased inhibition zone diameter by 26.89 % against Ralstonia solanacearum in comparison with pure TTO, with the minimum inhibition concentration reduced from 1.8 mg·mL−1 to 0.6 mg·mL−1. The enhanced antibacterial mechanism was proposed based on physical disruption via strong adhesion. BNNS-SAAs also presented superior adhesion and wettability on seed and foliar surfaces, and also promoted seed germination by providing more S nutrients, and exhibited no significant cytotoxicity. Our system provides a green and effective platform response to redox stimuli to load and release essential oils for application in bacterial wilt control.

Active biodegradable bacterial cellulose films with potential to minimize the plastic pollution: Preparation, antibacterial application, and mechanism

Petroleum-based films have triggered a serious global pollution crisis because they are difficult to recycle, degrade, and reuse. Developing alternative sustainable active films represents a powerful strategy to address these issues. Here, a multifunctional biodegradable bacterial cellulose (BC) film incorporated with guanidine-based polymer (PHGH)/gallic acid (GA) was constructed (termed OBC-PHGH/GA). The resulting OBC-PHGH/GA film exhibited a highly interweaved nanofiber network structure with excellent tensile strength and ductility. The OBC-PHGH/GA film showed an excellent antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with inhibition efficiencies of ~99.99 % compared with BC and the plastic film. Moreover, the as-prepared film showed excellent UV-shielding, antioxidant, and antifungal activities, showing great potential in food packaging. More importantly, the OBC-PHGH/GA films can be degraded into safe and reusable sugars, demonstrating outstanding environmental friendliness and sustainability. This work provides a promising and unique strategy for designing and fabricating green active packaging materials.

Preparation and Properties of Crosslinked Quaternized Chitosan-Based Hydrogel Films Ionically Bonded with Acetylsalicylic Acid for Biomedical Materials.

The aim of the current study is to develop chitosan-based biomaterials which can sustainably release acetylsalicylic acid while presenting significant biological activity. Herein, an innovative ionic bonding strategy between hydroxypropyl trimethyl ammonium chloride chitosan (HACC) and acetylsalicylic acid (AA) was proposed, skillfully utilizing the electrostatic attraction of the ionic bond to achieve the controlled release of drugs. Based on this point, six crosslinked N-[(2-hydroxy-3-trimethylammonium)propyl]chitosan acetylsalicylic acid salt (CHACAA) hydrogel films with varying acetylsalicylic acid contents were prepared by a crosslinking reaction. The results of 1H nuclear magnetic resonance spectroscopy (1H NMR) and scanning electron morphology (SEM) confirmed the crosslinked structure, while the obtained hydrogel films possessed favorable thermal stability, mechanical properties, and swelling ability. In addition, the drug release behavior of the hydrogel films was also investigated. As expected, the prepared hydrogel films demonstrated the capability for the sustainable release of acetylsalicylic acid due to ion pair attraction dynamics. Furthermore, the bioactivities of CHACAA-3 and CHACAA-4 hydrogel films with acetylsalicylic acid molar equivalents of 1.25 and 1.5 times those of HACC were particularly pronounced, which not only exhibited an excellent drug sustained-release ability and antibacterial effect, but also had a higher potential for binding and scavenging inflammatory factors, including NO and TNF-α. These findings suggest that CHACAA-3 and CHACAA-4 hydrogel films hold great potential for applications in wound dressing, tissue engineering scaffolds, and drug carriers.

Employing Manganese Dioxide and Bamboo Carbon for Capacitive Water Desalination and Disinfection.

A manganese dioxide (MnO2)/bamboo carbon (BC) composite was prepared using hydrothermal and impregnation methods and used for the capacitive desalination (CDI) and disinfection of water. The results showed that these composites had fast Na+ ion exchange and charge transfer properties. During the CDI process, these composites' electrodes exhibited good cycle stability and electrosorption capacity (4.09 mg/g) and an excellent bactericidal effect. These carbon-based composite electrodes' bactericidal rate for Escherichia coli could reach 99.99% within 180 min; therefore, they had good performance and are a good choice for high-performance deionization applications.

3D-printed porous titanium rods equipped with vancomycin-loaded hydrogels and polycaprolactone membranes for intelligent antibacterial drug release

Implant-related infections pose significant challenges to orthopedic surgeries due to the high risk of severe complications. The widespread use of bioactive prostheses in joint replacements, featuring roughened surfaces and tight integration with the bone marrow cavity, has facilitated bacterial proliferation and complicated treatment. Developing antibacterial coatings for orthopedic implants has been a key research focus in recent years to address this critical issue. Researchers have designed coatings using various materials and antibacterial strategies. In this study, we fabricated 3D-printed porous titanium rods, incorporated vancomycin-loaded mPEG750-b-PCL2500 gel, and coated them with a PCL layer. We then evaluated the antibacterial efficacy through both in vitro and in vivo experiments. Our coating passively inhibits bacterial biofilm formation and actively controls antibiotic release in response to bacterial growth, providing a practical solution for proactive and sustained infection control. This study utilized 3D printing technology to produce porous titanium rod implants simulating bioactive joint prostheses. The porous structure of the titanium rods was used to load a thermoresponsive gel, mPEG750-b-PCL2500 (PEG: polyethylene glycol; PCL: polycaprolactone), serving as a novel drug delivery system carrying vancomycin for controlled antibiotic release. The assembly was then covered with a PCL membrane that inhibits bacterial biofilm formation early in infection and degrades when exposed to lipase solutions, mimicking enzymatic activity during bacterial infections. This setup provides infection-responsive protection and promotes drug release. We investigated the coating’s controlled release, antibacterial capability, and biocompatibility through in vitro experiments. We established a Staphylococcus aureus infection model in rabbits, implanting titanium rods in the femoral medullary cavity. We evaluated the efficacy and safety of the composite coating in preventing implant-related infections using imaging, hematology, and pathology. In vitro experiments demonstrated that the PCL membrane stably protects encapsulated vancomycin during PBS immersion. The PCL membrane rapidly degraded at a lipase concentration of 0.2 mg/mL. The mPEG750-b-PCL2500 gel ensured stable and sustained vancomycin release, inhibiting bacterial growth. We investigated the antibacterial effect of the 3D-printed titanium material, coated with PCL and loaded with mPEG750-b-PCL2500 hydrogel, using a rabbit Staphylococcus aureus infection model. Imaging, hematology, and histopathology confirmed that our composite antibacterial coating exhibited excellent antibacterial effects and infection prevention, with good safety in trials. Our results indicate that the composite antibacterial coating effectively protects vancomycin in the hydrogel from premature release in the absence of bacterial infection. The outer PCL membrane inhibits bacterial growth and prevents biofilm formation. Upon contact with bacterial lipase, the PCL membrane rapidly degrades, releasing vancomycin for antibacterial action. The mPEG750-b-PCL2500 gel provides stable and sustained vancomycin release, prolonging its antibacterial effects. Our composite antibacterial coating demonstrates promising potential for clinical application.

Silver-quercetin-loaded honeycomb-like Ti-based interface combats infection-triggered excessive inflammation via specific bactericidal and macrophage reprogramming

Excessive inflammation caused by bacterial infection is the primary cause of implant failure. Antibiotic treatment often fails to prevent peri-implant infection and may induce unexpected drug resistance. Herein, a non-antibiotic strategy based on the synergy of silver ion release and macrophage reprogramming is proposed for preventing infection and bacteria-induced inflammation suppression by the organic-inorganic hybridization of silver nanoparticle (AgNP) and quercetin (Que) into a polydopamine (PDA)-based coating on the 3D framework of porous titanium (SQPdFT). Once the planktonic bacteria (e.g., Escherichia coli, Staphylococcus aureus) reach the surface of SQPdFT, released Que disrupts the bacterial membrane. Then, AgNP can penetrate the invading bacterium and kill them, which further inhibits the biofilm formation. Simultaneously, released Que can regulate macrophage polarization homeostasis via the peroxisome proliferators-activated receptors gamma (PPARγ)-mediated nuclear factor kappa-B (NF-κB) pathway, thereby terminating excessive inflammatory responses. These advantages facilitate the adhesion and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs), concomitantly suppressing osteoclast maturation, and eventually conferring superior mechanical stability to SQPdFT within the medullary cavity. In summary, owing to its excellent antibacterial effect, immune remodeling function, and pro-osteointegration ability, SQPdFT is a promising protective coating for titanium-based implants used in orthopedic replacement surgery.

Bacterial-responsive biodegradable silver nanoclusters composite hydrogel for infected wound therapy

Skin wounds are susceptible to bacterial infections, which hinder healing and extend recovery. Herein, we designed a silver nanoclusters (Ag NCs) composite hydrogel for infected wound treatment via bacterial enzymatic degradation and Ag release. Using biocompatible gelatine and polyethylene glycol as the main components, DNA-templated Ag NCs were covalently linked to a polymer network to obtain the final nanocomposite hydrogel. This hydrogel exhibited good compressive and tensile stiffness, bioadhesion and water absorption. The overexpressed bacterial enzymes protease and DNase in the infected wound were hydrolysed by the gel matrix, subsequently releasing antibacterial Ag ions. In vitro experimental results proved that the hydrogel demonstrated excellent bactericidal effect on Staphylococcus aureus and Escherichia coli, which are commonly implicated in clinical wound infections. Animal experiments revealed that the hydrogel considerably promoted cell proliferation and wound healing with less inflammatory responses. Thus, these results demonstrate strategies for bacterial enzyme–responsive Ag release for infected wound healing, facilitating further development of intelligent bandages.

Inhibitory Mechanism of the Oregano Essential Oil on the Growth and Biofilm Formation of Streptococcus mutans

Objective: The objective was to determine the in vitro antibacterial effect of the Oregano essential oil (OEO) on Streptococcus mutans ( S mutans) and to explore the anti-biofilm effect and mechanism of OEO. Methods: The in vitro antibacterial susceptibility of OEO was detected by the growth curve and colony-forming unit (CFU) counting method. Confocal laser scanning microscope (CLSM) and crystal violet assay were used to explore the anti-biofilm activity of OEO, and the anti-biofilm mechanism was explored from the aspects of extracellular polysaccharides (EPS) synthesis, acidoid, and extracellular DNA changes. OEO was characterized using a gas chromatography-mass spectrometer and cytotoxicity was tested using a cell counting Kit-8 assay. Results: The minimum inhibitory concentration of OEO was 0.25 mg/mL, and the CFU showed the ability of OEO to kill planktonic bacteria. Scanning electron microscopy and CLSM showed that OEO could hinder the development of biofilms, harm bacteria, and eliminate mature biofilms by changing EPS synthesis and pH value. Carvacrol in OEO played a major role in biological antibacterial activity. OEO had low cytotoxicity and good biocompatibility. Conclusions: OEO had excellent antibacterial and anti-biofilm effects on the key virulence traits of S mutans, indicating potential prospects in preventing dental caries.