Evolutionary Optimization Techniques Research Articles

Integrated Index Vector Method and Hybrid Ant Lion Chaotic Evolutionary Programming Optimization (HALCEP) Technique for Loss Minimization in Distribution System

Distribution system is the final section of the electrical power system, apart from the transmission and generation system. The distribution system acts as the interface that connects the high-voltage network to the low-voltage consumer service point. Consequently, the distribution system contributes the most of the overall losses in the electrical power system. Hence, evolutionary computation was introduced to accomplish a reduction of the previously said losses. The evolutionary computation involves optimization techniques to allocate distributed generation (DG) to the distribution system. Unfortunately, several optimization techniques are not capable of achieving accurate results and are trapped at local optima. This paper presents the Integrated Index Vector Method and Hybrid Ant Lion Chaotic Evolutionary Programming Optimization (HALCEP) technique for loss minimization in a distribution system. In this study, Evolutionary Programming (EP), Ant Lion Optimization (ALO) and HALCEP optimization engines are developed. The validation process was simulated on the IEEE 33-bus radial distribution system (RDS) model. Comparative studies were performed to gain a clear observation of the advantage of the developed HALCEP over the conventional EP and the ALO techniques, effectively showing its capability to outperform them.

Effective optimization strategies for abrasive water jet machining of glass-carbon fiber reinforced composites: A comparative study of evolutionary optimization techniques

This study applied evolutionary optimization techniques and neural networks to predict optimum machining parameters of Abrasive Water Jet Machining (AWJM) for machining Glass-Carbon Fiber Reinforced Composite (GCFRC) materials. Several researchers have employed different optimization techniques; however, evolving computational capabilities further open avenues to optimize such parameters. Five evolutionary techniques, namely Artificial Neural Network (ANN), Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Simulated Annealing (SA), and Nonlinear Least Square Error (LSE), were applied to minimize surface roughness (Ra) and maximize kerf width (Kw) and material removal rate (MRR). The output performance parameters (Ra, Kw, and MRR) were formulated as a linear mathematical function of machining parameters: tool feed rate (TFR), cutting speed rate (CSR), and stand-off distance (SOD). Though this study solves linear optimization problems, the proposed technique will be a strong tool for solving complex associations of machining and performance parameters in the future. A dataset of machining parameters and subsequent performance parameters was adopted from the available literature. The results indicated that the LSE method outperformed other techniques, yielding the lowest Root Mean Square Error (RMSE) in predicting Ra, Kw, and MRR, thus ensuring high machining accuracy. LSE technique reported relatively least RMSE values of 0.37 µm, 0.149Mm, and 237.23 mm3/min for Ra, Kw, and MRR, respectively. SA and PSO displayed identical and competitive RMSE values, slightly higher than LSE (up to 20 % higher). ANN and GA techniques were not effective relative to other considered techniques. LSE, SA, and PSO provide superior performance in optimizing AWJM parameters. The significant contribution of this research is the proposed optimization technique, offering a clear direction for solving complex associations between the performances and machining parameters of AWJM. This work also provides a foundation for future research to optimize such associations for other machining setups.

Size Optimization of Truss Structures Based on Genetic Algorithm by Developing Single-point Crossover with Bit-wise Mutation Using FORTRAN Programming

A truss is a collection of axially loaded structural elements connected through pin joints. Optimization of truss structures indicates the determination of best possible conditions that are necessary for achieving the most economical design in terms of lowest possible weights of the truss elements. According to recent studies, Size, Topology and Shape based optimizations are the three possible independent optimization scopes for finding the optimum weight of a truss. The current study focuses on the size optimization of truss structure and aims to identify the most cost-effective sections of the truss using a powerful evolutionary optimization technique named as Genetic Algorithm (GA). Here single point cross over method and bit wise mutation operator are adopted for expanding the search space with the assigned displacement and stress constraints. Fortran based sub routines are developed for each individual steps of GA such as fitness evaluation, selection, cross-over and mutation. Finaly the complete program is run for validation of its outcome. While comparing with the solution of an existing literature regarding a minimization of objective function having two design variables the outcomes tend to show a good correlation. Further, the study is extended for the weight minimization of two widely used truss having 10 members and 17 members respectively with standard Finite Element Method of analysis. Minimum weight of each truss is obtained via convergence plot and compared with the existing literatures. With this simple but efficient global optimization technique optimum weight of truss structure can easily be achieved.

Comparison of Bioinspired Techniques for Tracking Maximum Power under Variable Environmental Conditions

This paper presents a comparative analysis of bioinspired algorithms employed on a PV system subject to standard conditions, under step-change of irradiance conditions, and a partial shading condition for tracking the global maximum power point (GMPP). Four performance analysis and comparison techniques are artificial bee colony, particle swarm optimization, genetic algorithm, and a new metaheuristic technique called jellyfish optimization, respectively. These existing algorithms are well-known for tracking the GMPP with high efficiency. This paper compares these algorithms based on extracting GMPP in terms of maximum power from a PV module running at a uniform (STC), nonuniform solar irradiation (under step-change of irradiance), and partial shading conditions (PSCs). For analysis and comparison, two modules are taken: 1Soltech-1STH-215P and SolarWorld Industries GmbH Sunmodule plus SW 245 poly module, which are considered to form a panel by connecting four series modules. Comparison is based on maximum power tracking, total execution time, and minimum number of iterations to achieve the GMPP with high tracking efficiency and minimum error. Minitab software finds the regression equation (objective function) for STC, step-changing irradiation, and PSC. The reliability of the data (P-V curves) was measured in terms of p value, R, R2, and VIF. The R2 value comes out to be near 1, which shows the accuracy of the data. The simulation results prove that the new evolutionary jellyfish optimization technique gives better results in terms of higher tracking efficiency with very less time to obtain GMPP in all environmental conditions, with a higher efficiency of 98 to 99.9% with less time of 0.0386 to 0.1219 sec in comparison to ABC, GA, and PSO. The RMSE value for the proposed method JFO (0.59) is much lower than that of ABC, GA, and PSO.

Enhancing 5G propagation into vehicles and buildings using optically transparent and polarisation insensitive metasurfaces over wide-incidence angles

This article introduces two transmissive metasurfaces applied to normal windows, aiming to improve the 5G outdoor-to-indoor (O2I) coverage. These windows can be utilized in various settings, such as vehicles or buildings. The proposed unit cells, designed to be wide-incident angle and polarization insensitive, are implemented in both single-glazing and double-glazing glasses, arranged in a periodic structure to form the transmission surfaces. Both metasurfaces maintain optical transparency by incorporating Indium Tin Oxide (ITO) as the conductive element in each unit cell. These engineered transmission surfaces enhance the 5G signal indoor coverage at the 3.5 GHz band across a broad range of incident angles. While multi-layer structures typically exhibit heightened sensitivity to the angle of incidence, the proposed two-layered transmissive surfaces demonstrate substantial angular stability, reaching up to 65 and 75 degrees for double- and single-glazed glass, respectively. To achieve this wide and stable angular response, evolutionary optimization techniques were employed to fine-tune the proposed unit cells. Both designs exhibit a high transmission coefficient across the operating frequency for a variety of incident angles, surpassing those reported in the existing literature. Experimental evaluations of the fabricated prototypes indicate that both metasurfaces hold significant potential for enhancing signal propagation into buildings and vehicles.

Hybridization in meta-heuristic techniques for green layout design in the tyre manufacturing industry: An optimal analysis

To stop or lessen factory pollution, many academics in the field of study have produced a vast array of strategies to achieve optimization goals. But, it is unable to follow a uniform solution for all production facilities. In this research work, green layout design (GLD) is proposed to minimize total material handling cost (TMHC) and CO2 emissions. The green facility layout refers to the facility layout with minimum CO2 emissions and to eliminate unnecessary energy dissipation from material handling equipments & production machineries, as well as plant re-layout in-term on material handling cost. In this study context, a Lagrangian relaxation model has been used at the allocation level. It computes a suboptimal solution to the dual problem in order to obtain a feasible solution. This enhanced algorithm method iteratively tries to minimize the gap between the dual and feasible solutions on minimal of TMHC and CO2 emission rate. It has been experimentally simulated using the MATLAB (Matrix Laboratory) application and upgraded adaptive salp swarm optimization (ASSO), dragon fly optimization (DFO) and Hybrid (combination) of ASSO-DFO evolutionary optimization techniques. The primary focus of this implementation is to control material handling between departments or cells, production flow between departments, energy consumption (electrical and gas consumption for production), and manpower utilization within and across departments. This research has chosen an existing and acceptable designs from targeted tyre manufacturing company in South India. The hybrid ASSO-DFO implementation TMHC differs from ABC by 60%, DFO by 65%, 58% with simulated annealing (SA), and ASSO by 48%. Emission rate decreased by 26% ABC, 21% DFO, and 24% SA & 18% with ASSO. An average of 50% decrease in TMHC and 25% reduction of CO2 emission rate in GLD have been achieved.

Augmenting cybersecurity in smart urban energy systems through IoT and blockchain technology within the Digital Twin framework

This research presents a comprehensive framework to enhance the cybersecurity and efficiency of smart urban energy systems by integrating cutting-edge technologies. Leveraging advanced evolutionary optimization techniques, specifically Covariance Matrix Adaptation Evolution Strategy (CMA-ES), the proposed system optimizes energy management and trading within urban infrastructure. Simultaneously, the integration of Internet of Things (IoT) devices enables real-time monitoring and decision-making, while blockchain technology ensures secure and transparent transactions. The study evaluates system performance by comparing it with traditional approaches, assessing key metrics such as convergence speed, exploration, exploitation, and cybersecurity. Results indicate that the proposed framework outperforms traditional systems in energy efficiency, cost-effectiveness, and cybersecurity metrics. This research offers valuable insights into integrating emerging technologies to address evolving challenges in smart urban energy systems. The findings highlight the potential of this innovative framework to revolutionize urban energy management, providing a foundation for more resilient, secure, and efficient smart cities. As the global urban landscape continues to evolve, this framework represents a strategic approach to meet the increasing demands for sustainable and secure urban energy solutions.

Bilevel planning of electric vehicle charging station and battery swapping station considering real-time uncertainty

The placement of electric vehicle charging stations (EVCS) and battery swapping stations (BSS) is crucial to meet demand while minimizing their impact on the power system network. This article addresses the placement and scheduling of EVCS and BSS within a radial distribution network (RDN) overlaid with a road network. Electric Vehicle Routing Problem (EVRP) and Traffic Assignment Problem (TAP) is introduced to reduce EV energy consumption during trips to EVCS and BSS. A Bi-layer optimization approach is used, with the outer layer minimizing energy loss by allocating EVCS and BSS optimally, and the inner layer optimizing scheduling considering associated costs. Uncertainties related to EV is considered on a real-time trip basis and modelled using 2m-Point estimation method. The problem is solved using Differential Evolution (DE) and Prairie Dog Optimization (PDO) techniques. PDO results in a 9.6% reduction in total energy losses and a 22.5% decrease in total associated costs by optimally placing EVCS at 69, 25,114 and BSS at 19, 84,113 of the RDN compared to DE. Inclusion of 2-m PEM uncertainty increases total energy loss by 8.76% but decreases total associated costs by 6.97% compared to real-time uncertainty cases, enhancing the realism of the results.

Estimating Non-Linear Heat Flux in Continuous Billet Casting Process With Limited Sensors

In a continuous billet caster, the heat transfer from the pool of molten steel to the cooling water via the copper mold depends non-linearly upon several casting parameters. A reliable and accurate methodology based on the principle of inverse heat transfer technique has been proposed in this work to obtain the nonlinear heat flux of a continuous billet casting mold. Differential evolution optimization technique has been used, in conjunction with the 2-D and 3-D steady state conduction heat transfer equations to develop the complete algorithm. It has been observed that both the 2-D and 3-D models are able to accurately predict the heat flux for different numbers and locations of temperature sensors. While the 2-D model estimates the 1-D heat flux profile varying along casting direction within a very short time period, the 3-D model offers the advantage of estimating a more accurate 2-D heat flux profile varying along both the mold length and width. The 2-D model has also been used to estimate the heat flux for an industrial continuous casting mold using measured plant data. It is observed that the present methodology accurately estimates the boundary heat flux in the continuous billet caster mold.

Optimization Strategies for Electric Vehicle Charging and Routing: A Comprehensive Review

Based on information from recent research, by 2045, Electric Vehicles (EV) will dominate the roads with presence of more than 80% of its kind. Hence, these vehicles' grid level penetration will increase proportionally, which challenges the existing grid infrastructure in terms of its reliability and energy management capabilities. New techniques to store and consume massive quantities of energy from the power grid, as well as infusing the captive energy within the EV in response to grid demands, are emerging with the advent of electric vehicles. Everything could be handled smoothly only if we schedule the EV operation (charging/discharging) more optimally and efficiently using scheduling algorithms. Despite the existence of many routings and charging schedule computations, nature-inspired optimization approaches might play a critical role in responding to such routing challenges. Researchers have created several optimum scheduling approaches, such as Dynamic Programming, Differential Evolutionary Optimization Techniques, Collaborative Optimization Scheduling, Two-stage optimal scheduling strategy, and so on. The optimum schedule review examines the operation of an EV fleet while considering uncertainty sources and varied EV operating circumstances by integrating heuristic and meta-heuristic techniques. This paper exhibits a deep review on the various EV optimal scheduling techniques and adopted algorithms which are the emerging best practices like predictive analytics, dynamic routing, user centric planning, multi-objective optimization, etc. that reflect the industry's focus on leveraging advanced technologies, data-driven decision-making, and collaborative approaches to enhance the efficiency and sustainability of electric vehicle routing and charging scheduling.

Optimization of Antenna Excitations for Non-Invasive Microwave Hyperthermia for Breast Cancer Treatment

This research demonstrates an effective focused microwave hyperthermia for non-invasive breast cancer treatment at early stages where the tumour size is small and has not spread to nearby tissues. First, a three-dimensional (3-D) Micro-Strip Patch (MSP) antenna array consisting of four elements and operating at 2.45GHz is used. Second, two evolutionary optimization techniques, particle swarm optimization (PSO) and genetic algorithm (GA), are compared in terms of optimization speed in order to select the algorithm which will be used in this study to calculate the ideal phase and amplitude excitations for each MSPA. The fitness function of the used algorithm aims to increase the specific absorption rate (SAR) and power density (Q) at the tumour site while keeping these values at minimum levels in healthy positions. The focusing technique is used to collect a data of accurate antenna excitations of a tumour having a radius of 2.5 mm (less than 1 cm3 volume), embedded in every possible position in the glandular tissues in the antenna array's central plane. Using MRI results from a real patient (age 40) in the prone position, a realistic breast model was produced. In order to demonstrate the efficiency of the suggested 3D microwave focusing technology, the temperature distribution at the tumour centre position was measured and compared with other healthy locations. The data gathered are then used to create a non-invasive hyperthermia GUI system for the treatment of breast cancer.

Fractal Geometry Meets Computational Intelligence: Future Perspectives.

Characterizations in terms of fractals are typically employed for systems with complex and multiscale descriptions. A prominent example of such systems is provided by the human brain, which can be idealized as a complex dynamical system made of many interacting subunits. The human brain can be modeled in terms of observable variables together with their spatio-temporal-functional relations. Computational intelligence is a research field bridging many nature-inspired computational methods, such as artificial neural networks, fuzzy systems, and evolutionary and swarm intelligence optimization techniques. Typical problems faced by means of computational intelligence methods include those of recognition, such as classification and prediction. Although historically conceived to operate in some vector space, such methods have been recently extended to the so-called nongeometric spaces, considering labeled graphs as the most general example of such patterns. Here, we suggest that fractal analysis and computational intelligence methods can be exploited together in neuroscience research. Fractal characterizations can be used to (i) assess scale-invariant properties and (ii) offer numeric, feature-based representations to complement the usually more complex pattern structures encountered in neurosciences. Computational intelligence methods could be used to exploit such fractal characterizations, considering also the possibility to perform data-driven analysis of nongeometric input spaces, therby overcoming the intrinsic limits related to Euclidean geometry.

Bayesian Optimization for Contamination Source Identification in Water Distribution Networks

In the wake of the terrorist attacks of 11 September 2001, extensive research efforts have been dedicated to the development of computational algorithms for identifying contamination sources in water distribution systems (WDSs). Previous studies have extensively relied on evolutionary optimization techniques, which require the simulation of numerous contamination scenarios in order to solve the inverse-modeling contamination source identification (CSI) problem. This study presents a novel framework for CSI in WDSs using Bayesian optimization (BO) techniques. By constructing an explicit acquisition function to balance exploration with exploitation, BO requires only a few evaluations of the objective function to converge to near-optimal solutions, enabling CSI in real-time. The presented framework couples BO with EPANET to reveal the most likely contaminant injection/intrusion scenarios by minimizing the error between simulated and measured concentrations at a given number of water quality monitoring locations. The framework was tested on two benchmark WDSs under different contamination injection scenarios, and the algorithm successfully revealed the characteristics of the contamination source(s), i.e., the location, pattern, and concentration, for all scenarios. A sensitivity analysis was conducted to evaluate the performance of the framework using various BO techniques, including two different surrogate models, Gaussian Processes (GPs) and Random Forest (RF), and three different acquisition functions, namely expected improvement (EI), probability of improvement (PI), and upper confident bound (UCB). The results revealed that BO with the RF surrogate model and UCB acquisition function produced the most efficient and reliable CSI performance.

Topology Optimization using Nonlinear Finite Element Analysis

Topology optimization is a structural-mechanical investigation that structures optimization function values in an optimization iteration. Topology optimization with nonlinear static behavior is difficult due to several design considerations. Due of significant integrate distortion, low-density finite elements provide significant numerical challenges in the prevailing element density focused topology planning taking nonlinear dynamics under factor. Iterative procedures are used in the Bi-directional Evolutionary Structural Optimization (BESO) technique for reducing waste from a structure while concurrently adding efficient material using a finite element-based topology optimization strategy. Integrating the fully-connected Deep Neural Network (DNN) with the norm-level-set techniques yields a powerful method for optimizing structural topology. Hence, BESO-DNN has been designed spatial optimization of material distribution inside a specified area is the focus of topology optimization is a mathematical approach for minimizing a certain cost function while meeting a set of predefined restrictions. Topology optimization of geometrically non-linear systems is advantageous because of the solutions' lack of intermediate-density components and their great processing efficiency of high-resolution barrier representation can be effective. As a result, topology optimization is ensuring effective and providing fresh and efficient designs, understanding that outcomes needs an integration of credible decision-making, domain knowledge, and numerical analytic skills. The outcome of finite element analysis has to understand and anticipate an object's performance under various physical conditions using mathematical models, and testing.

Statistical Evaluation of Sustainable Urban Planning: Integrating Renewable Energy Sources, Energy-Efficient Buildings, and Climate Resilience Measures

In the face of increasing climate-related challenges, sustainable urban energy networks must grapple with transmission congestion in deregulated power systems. This study introduces a novel statistical approach that synergizes two powerful methodologies for evaluating and managing urban energy networks: the integration of photovoltaic (PV) renewable energy sources and Gated Recurrent Unit (GRU)-based PV forecasting. By combining evolutionary optimization techniques with GRU forecasting, we aim to bolster the sustainability and reliability of urban energy networks while addressing climate change adaptation. In this study, we employ statistical methods, including generator sensitivity ratios and bus sensitivity ratios (BSR), to pinpoint optimal locations for PV power integration within urban networks. The Lion Optimization Algorithm (LOA), an evolutionary optimization method, is employed within a digital twin framework to optimize active power rescheduling values and congestion prices. The incorporation of GRU-based PV forecasting enhances the precision and resilience of our energy management approach. Through extensive simulations conducted on the New England 39-bus system, our findings reveal that the combination of the LOA method and GRU forecasting outperforms traditional optimization techniques such as the Ant Lion Optimizer (ALO) and Particle Swarm Optimization (PSO). This dual-optimization strategy leads to significantly reduced active power rescheduling values and congestion prices, underlining the potential of our statistical model to effectively manage congestion in transmission lines within sustainable urban energy networks. In the context of integrating renewable PV sources and adapting urban energy infrastructure to climate change impacts, the synergy of evolutionary optimization and GRU-based forecasting offers a robust pathway to enhance sustainability and reliability in urban energy networks.

Optimizing Linseed (Linum usitatissimum L.) Seed Yield through Agronomic Parameter Modeling via Artificial Neural Networks

Linseed (Linum usitatissimum L.), a globally cultivated oilseed crop in high demand, is the focal point of our efforts aimed at improving yield production. The achievement of robust yield outcomes relies on the intricate interplay of various agronomic traits. This study, conducted over two years at a research farm in Iran, presents a comprehensive analysis evaluating diverse agronomic characteristics inherent to different linseed cultivars and hybrids. Essential parameters, including days to emergence, days to flowering, plant height, number of branches, number of capsules per plant, number of seeds per capsule, 1000-seed weight, and seed yield per plant, were examined. For predictive insights into seed yield, machine learning techniques, specifically multilayer perceptron (MLP) and multiple linear regression (MLR), were employed. The analysis of contribution percentages for each agronomic variable to linseed seed yield revealed that the number of capsules per plant emerged as the most influential factor, contributing 30.7% among the considered variables. The results indicated the superiority of MLP over MLR, with RMSE and MAPE values equaling 0.062 g/plant and 3.585%, respectively. Additionally, R2 values for training, validation, and test phases exceeded 0.97. Consequently, MLP served as a merit function in the genetic algorithm (GA), targeting the identification of optimal trait levels to maximize linseed yield. The optimization outcomes demonstrated the potential achievement of a yield of 4.40 g/plant. To attain this performance, a set of agronomic characteristic values was proposed by GA, initiating a discussion on genetic modification possibilities. The findings of this study highlight the remarkable efficacy of machine learning tools, particularly neural networks, when paired with evolutionary optimization techniques such as genetic algorithms. These methodologies prove to be invaluable assets in aiding biotechnologists as they strive to enhance the genetic makeup of products for various applications, providing unwavering reliability and invaluable guidance in the pursuit of genetic modification endeavors.

Evolutionary Optimization Techniques in Analog Integrated Circuit Designs

The proposed genetic algorithm (GA) and particle swarm optimization (PSO) applied for the optimal design of a one-stage operational amplifier circuit with a current mirror load are studied in this work. The sizes of transistors are optimized using the proposed GA and PSO for improved areas and performance parameters of the circuit. A number of performance parameters are collected from the data set created by GA and PSO to optimize the size of transistors and other design parameters. The Spectre simulator is chosen for the simulation of circuit parameters to obtain necessary for the GA and PSO algorithm. Post-optimization results justify that the proposed GA and PSO methods are competitive with differential evolution regarding convergence speed, design specifications, and the optimal CMOS one-stage operational amplifier circuit parameters.

Optimisation of Small Hydropower Units in Water Distribution Systems by Demand Forecasting

The potential of water supply systems for renewable electrical energy production is frequently utilised by a small-scale hydropower unit (SHPU) that utilises the surplus water or pressure. However, fluctuating demand on an hourly and daily basis represents a significant challenge in operating such devices. To address this issue, a control strategy based on demand forecast is implemented, adjusting the SHPU’s inflow based on current demand conditions. Thus, individual days are categorised into control categories with similar flow conditions, and control is optimised for each category using a simplified evolutionary optimisation technique. Coupled with demand forecasts, the SHPU controller evaluates on a daily basis which set of water levels to utilise for the next day to optimise energy production. This approach is implemented in an alpine municipality, and its economic feasibility is evaluated through a long-term simulation over 10 years. This approach resulted in an annual profit increase compared to the reference status based on well-informed expert knowledge. However, it is worth noting that the approach has limited suitability for further improvements within the case study. Nonetheless, SHPUs also contribute to improving water quality and, if the electrical energy generated is directly used to operate the water supply, enhance resilience to grid failures.

Sliding mode controller design for unstable processes with dead time with a case study on continuous stirred tank reactor

Unstable processes are difficult to control because one or more poles lie on the right-hand side of the s-plane. Control becomes further complicated by the presence of dead time in such systems. In this study, a sliding mode control (SMC) design is proposed for the control of unstable processes with dead time. To apply the SMC, a second order plus dead time (SOPDT) model of the unstable process is used, and a proportional-integral-derivative-acceleration type sliding surface is considered. The parameters of continuous and discontinuous control laws are obtained using the differential evolution optimization technique. The optimal control problem is solved by satisfying a new weighted bi-objective function constituting the performance index integral absolute error and control input total variation. The proposed control scheme has been satisfactorily extended to control unstable integrating and higher-order unstable processes with dead time by approximating them into the unstable SOPDT model. The efficacy of the suggested scheme has been evaluated on several benchmark unstable industrial chemical processes, including the continuous stirred tank reactor (CSTR). Further, this scheme has been compared with recently reported work, and the obtained results clearly demonstrate the effectiveness of the suggested controller.

A Simulated-Annealing-Quasi-Oppositional-Teaching-Learning-Based Optimization Algorithm for Distributed Generation Allocation

Conventional evolutionary optimization techniques often struggle with finding global optima, getting stuck in local optima instead, and can be sensitive to initial conditions and parameter settings. Efficient Distributed Generation (DG) allocation in distribution systems hinges on streamlined optimization algorithms that handle complex energy operations, support real-time decisions, adapt to dynamics, and improve system performance, considering cost and power quality. This paper proposes the Simulated-Annealing-Quasi-Oppositional-Teaching-Learning-Based Optimization Algorithm to efficiently allocate DGs within a distribution test system. The study focuses on wind turbines, photovoltaic units, and fuel cells as prominent DG due to their growing usage trends. The optimization goals include minimizing voltage losses, reducing costs, and mitigating greenhouse gas emissions in the distribution system. The proposed algorithm is implemented and evaluated on the IEEE 70-bus test system, with a comparative analysis conducted against other evolutionary methods such as Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Honey Bee Mating Optimization (HBMO), and Teaching-Learning-Based Optimization (TLBO) algorithms. Results indicate that the proposed algorithm is effective in allocating the DGs. Statistical testing confirms significant results (probability < 0.1), indicating superior optimization capabilities for this specific problem. Crucially, the proposed algorithm excels in both accuracy and computational speed compared to other methods studied.