Ethyl Vinyl Ether Research Articles

Insights into the mechanism, selectivity, and substituent effects in the Diels-Alder reaction of azatrienes with electron-rich dienophiles: An MEDT study

The reactivity and mechanistic intricacies of azatrienes in Diels-Alder reactions have been relatively unexplored despite their intriguing potential applications. In this study, we employ Molecular Electron Density Theory to theoretically investigate the hetero-Diels–Alder reaction involving azatrienes with ethyl vinyl ether and allenyl methyl ether. Analysis of Conceptual Density Functional Theory, energetic profiles, and the topological characteristics is conducted to elucidate the reactions. The revealed mechanism manifests as a polar one-step two-stages process under kinetic control. We establish a clear relationship of between the periselectivity, regioselectivity, and stereoselectivity on one hand and the characteristics of the reactions mechanism on the other hand. The influence of weak interactions on reaction activation barriers and bonding evolution are discussed in detail. We demonstrate that substituents enhancing the reverse electron density flux facilitate the feasibility of the reactions. The results lay ground for a meticulous control of the reaction of azatriene in similar synthetic scenarios.

Toward Lung Ventilation Imaging Using Hyperpolarized Diethyl Ether Gas Contrast Agent.

Hyperpolarized 129Xe gas was FDA-approved as an inhalable contrast agent for magnetic resonance imaging of a wide range of pulmonary diseases in December 2022. Despite the remarkable success in clinical research settings, the widespread clinical translation of HP 129Xe gas faces two critical challenges: the high cost of the relatively low-throughput hyperpolarization equipment and the lack of 129Xe imaging capability on clinical MRI scanners, which have narrow-bandwidth electronics designed only for proton (1H) imaging. To solve this translational grand challenge of gaseous hyperpolarized MRI contrast agents, here we demonstrate the utility of batch-mode production of proton-hyperpolarized diethyl ether gas via heterogeneous pairwise addition of parahydrogen to ethyl vinyl ether. An approximately 0.1-liter bolus of hyperpolarized diethyl ether gas was produced in 1 second and injected in excised rabbit lungs. Lung ventilation imaging was performed using sub-second 2D MRI with up to 2×2 mm2 in-plane resolution using a clinical 0.35 T MRI scanner without any modifications. This feasibility demonstration paves the way for the use of inhalable diethyl ether as a gaseous contrast agent for pulmonary MRI applications using any clinical MRI scanner.

Cationic Hypervalent Chalcogen Bond Catalysis on the Povarov Reaction: Reactivity and Stereoselectivity.

Chalcogen bond catalysis, particularly cationic hypervalent chalcogen bond catalysis, is considered to be an effective strategy for organocatalysis. In this work, the cationic hypervalent chalcogen bond catalysis for the Povarov reaction between N-benzylideneaniline and ethyl vinyl ether was investigated by density functional theory (DFT). The catalytic reaction involves the cycloaddition process and the proton transfer process, and the rate-determining step is the cycloaddition process. Cationic hypervalent tellurium derivatives bearing CF3 and F groups exhibit superior catalytic activity. For the rate-determining step, the Gibbs free energy barrier decreases as the positive electrostatic potential of the chalcogen bond catalysts increases. More importantly, the Gibbs free energy barrier has a strong linear correlation with the electrostatic energy of the chalcogen bond in the catalyst-substrate complex. Furthermore, the catalytic reactions include the endo pathway and exo pathway. The C-H⋅⋅⋅π interaction between the substituent of the ethyl vinyl ether and the aryl ring of the N-benzylideneaniline contributes to the endo-selectivity of the reaction. This research contributes to a deeper understanding of chalcogen bond catalysis, providing insights for designing chalcogen bond catalysts with high performance.

An Efficient Access to Heteroaryl/Aryl-Annulated Pyridine Derivatives and a Study of Their Mosquito Larvicidal Activity Against Dengue Vector

AbstractWe report a convergent synthesis of heteroaryl/aryl-annulated pyridine and quinoline derivatives by a metal-free Povarov reaction. para-Toluene sulfonic acid was used as the catalyst in this reaction, which produced the products in good yields from the corresponding aromatic amines and ethyl vinyl ether. A pyridocoumarin and a pyridopyrimidine product were evaluated for their mosquito larvicidal activity against the third instar larvae of the dengue vector mosquito Aedes aegypti. Examination of morphological changes in the larvae showed damage to the target body part after treatment with both the pyridocoumarin and pyridopyrimidine products at the LC50 concentrations.

Highly dispersed Cs2O/SiO2 catalysts for selective intramolecular dehydration of ethylene glycol monoethyl ether to ethyl vinyl ether

Highly selective intramolecular dehydration of ethylene glycol monoethyl ether to ethyl vinyl ether over dispersed Cs2O/SiO2 catalysts.

Combining photocontrolled-cationic and anionic-group-transfer polymerizations using a universal mediator: enabling access to two- and three-mechanism block copolymers.

An ongoing challenge in polymer chemistry is accessing diverse block copolymers from multiple polymerization mechanisms and monomer classes. One strategy to accomplish this goal without intermediate compatibilization steps is the use of universal mediators. Thiocarbonyl thio (TCT) functional groups are well-known mediators to combine radical with either cationic or anionic polymerization, but a sequential cationic-anionic universal mediator system has never been reported. Herein, we report a TCT universal mediator that can sequentially perform photocontrolled cationic polymerization and thioacyl anionic group transfer polymerization to access poly(ethyl vinyl ether)-block-poly(thiirane) polymers for the first time. Thermal analyses of these block copolymers provide evidence of microphase separation. The success of this system, along with the established compatibility of radical polymerization, enabled us to further chain extend the cationic-anionic diblock using radical polymerization of N-isopropylacrylamide. The resulting terpolymer represents the first example of a triblock made from three different monomer classes incorporated via three different mechanisms without any end-group modification steps. The development of this simple, sequential synthesis using a universal mediator approach opens up new possibilities by providing facile access to diverse block copolymers of vinyl ethers, thiiranes, and acrylamides.

One‐Pot Stereoselective Synthesis of Different Fused Multicyclic Iminosugars Based on the Iminium‐Ion Intermediate

Comprehensive SummaryDifferent novel fused multicyclic iminosugars were synthesized from D‐ribose tosylate, aniline and vinyl ethyl ether by one‐pot three‐component stereoselective [4+2] reaction at different temperatures. The iminium‐ion is the key intermediate for the reaction. As a result, several complex fused iminosugars 3a were obtained by aza‐Diels‐Alder mechanism at 60 °C, while a series of aza‐C‐glycosides 5a were prepared by Mannich reaction at room temperature accompanied by another tetrahydroquinoline‐fused iminosugars 4a (tricyclic derivatives) through aza‐Diels‐Alder cycloaddition. This strategy will help to construct structurally diverse and bioactive iminosugar analogues.

Are (Co)Polymers of 1,1,3,3,3-Pentafluoropropene Possible?

The copolymerization and terpolymerization of 1,1,3,3,3-pentafluoropropene (PFP) with various combinations of fluorinated and hydrogenated comonomers were investigated. The chosen fluoromonomers were vinylidene fluoride (VDF), 3,3,3-trifluoropropene (TFP), hexafluoropropene (HFP), perfluoromethylvinyl ether (PMVE), chlorotrifluoroethylene (CTFE) and tert-butyl-2-trifluoromethacrylate (MAF-TBE), while the hydrocarbon comonomers were vinylene carbonate (VCA), ethyl vinyl ether (EVE) and 3-isopropenyl-α,α-dimethylbenzyl isocyanate (m-TMI). Copolymers of PFP with non-homopolymerizable monomers (HFP, PMVE and MAF-TBE) led to quite low yields, while the introduction of VDF enabled the synthesis of poly(PFP-ter-VDF-ter-M3) terpolymers with improved yields. PFP does not homopolymerize and delays the copolymerizations. All polymers were either amorphous fluoroelastomers or fluorothermoplastics with glass transition temperatures ranging from -56 °C to +59 °C, and they exhibited good thermal stability in air.

Atmospheric oxidation of unsaturated hydrofluoroethers initiated by OH radicals

Hydrofluoroethers (HFEs) are perfluorinated chemicals that were developed as alternative for chlorofluorocarbons (CFCs) in various applications. Among notable unsaturated HFEs are perfluoro methyl vinyl ether (PMVE, CF3OCFCF2) and perfluoro ethyl vinyl ether (PEVE, C2F5OCF = CF2). During the implementation of PMVE and PEVE, they spill and release to the atmosphere. Due to the tendency of perfluorinated compounds to have strong infrared absorption features and long atmospheric lifetimes, they are among the most potent greenhouse gases. Thus, it is important to accurately assess their atmospheric sink routes in order to assess their impact on climate change. Herein, we illustrated detailed mechanistic pathways and developed kinetic models with the underlying aim to comprehend the atmospheric fate of the title HFEs and the likely products of decomposition. It was found that the production of main products to stem from the addition of OH radical to the inner carbon-carbon double bond atoms. Atmospheric lifetimes of PMVE and PEVE were calculated to be ∼23 and ∼56 h; respectively. Time-dependent molar yields are acquired for the experimentally major products; namely carbonyl fluoride (CF2O), perfluorinated glyoxal (CFOCFO), perfluorinated methylformates (CF3OCFO and CF3CF2OCFO). Photochemical Ozone Creation Potentials (POCPs) of PMVE and PEVE were calculated to be 1.78 and 1.18, respectively. Obtained results tap into efforts that aim to understand the atmospheric chemistry cycles of perfluorinated chemicals in general.

Machine learning models for binary molecular classification using VUV absorption spectra

Machine learning methods were combined with differential absorption spectroscopy measurements in the vacuum-ultraviolet region (5.167 – 9.920 eV) in order to develop predictive capabilities for inferring molecular structure from the spectra. Several types of species were analyzed and, for modeling purposes, were defined using a single classification: (1) alkane, (2) conjugation with oxygen (e.g. diacetyl, ethyl vinyl ether), (3) non-conjugated alkene (e.g. 1-butene, 1,4-cyclohexadiene), (4) oxygen-containing (e.g. 1-butanol, tetrahydrofuran), or (5) cyclic (e.g. cyclopentane, cyclohexanone). The latter molecular classification excluded cyclic ethers. Several modeling methods were employed in the analysis of 102 absorption spectra, 24 of which were measured for the first time.The primary objective was to identify suitable methods that enable accurate predictions of molecular structure classifications with minimized statistical uncertainties. Rather than identifying a single, unifying method to reliably predict molecular structure contributions to VUV absorption spectra, coordination is required among a particular method, the type of molecular structure detail (e.g. conjugation), and absorption region of interest. The latter is accomplished using a binning approach, wherein absorption regions of ∼0.5 eV were utilized rather than the entire ∼4.8 eV range. Photon energy binning enabled analysis of region-specific predictions of accuracy, precision, and recall. The outcome from the binning approach is that, rather than utilizing the entire spectrum, optimal determination of molecular structure using machine learning methods depends on the absorption region. The present work provides separate machine learning models for each molecular classification, which enables the identification of multi-functional species relevant to atmospheric chemistry and combustion chemistry, where isomer-resolved speciation is critical to understanding complex reaction networks.

Unusual Diradical Intermediates in Ozonolysis of Alkenes: A Combined Theoretical and Synchrotron Radiation Photoionization Mass Spectrometric Study on Ozonolysis of Alkyl Vinyl Ethers.

Calculations and experiments were conducted on ozonolysis of ethyl vinyl ether (EVE) and butyl vinyl ether to identify an unconventional diradical intermediate generated from the O-O bond cleavage of primary ozonide. The diradical can undergo a H atom shifting process that yields keto-hydroperoxide (KHP), the characteristic product that identifies the existence of a diradical intermediate. RRKM-ME calculation, based on the PES at the CCSD(T)/VTZ//M06-2X/6-311++G(2df,2p) level, disclosed branching ratios of ∼0.65% for KHP formation. Using synchrotron-generated vacuum-ultraviolet photoionization mass spectrometry measurements, the formation of KHPs (C4H8O4) in ozonolysis of EVE was confirmed by ion signals of C4H8O4+ (ionization of KHP) and C4H7O2+ (ion fragment from the loss of HO2 from KHP) by comparing their photoionization efficiency spectra with the calculated adiabatic ionization energies and appearance energies.

Bio-based coating resins derived from cardanol using carbocationic polymerization and their evaluation as one-component alkyd-type coatings

A novel biobased monomer, cardanol ethyl vinyl ether (CEVE) and its autooxidatively curable linear homopolymer and copolymers were synthesized using carbocationic polymerization. Cardanol, a component of cashew nut-shell liquid has a unique phenolic structure with an unsaturated fatty chain. The polymers were cured oxidatively at both ambient and elevated temperatures (120 and 150 °C) resulting in crosslinked networks with better physical and thermomechanical properties than two commercial reference alkyds. Variations in the glass transition temperature (Tg) (5.6 to 26 °C), crosslink density (3.92 to 16.6 mol/cm3), tensile properties (12.2 to 26.6 MPa), and hardness (15 to 40 Sec.) were achieved by changing the copolymer composition from poly(CEVE) to poly(CEVE-co-CHVE)-50/50. These results clearly show the potential of these cardanol-based polymers for use as surface coatings.

Vacuum-ultraviolet absorption cross-sections of functionalized four-carbon species

Absorption cross-sections were measured in the vacuum ultraviolet from 5.17 – 9.92 eV using differential absorption spectroscopy for 33 four-carbon species: n-butane, trans-2-butene, cis-2-butene, butanal, butyric acid, ethyloxirane, trans-2,3-dimethyloxirane, cis-2,3-dimethyloxirane, 2-methyloxetane, 2,2′-bioxirane, vinyl oxirane, 3,4-epoxybutan-2-one, diacetyl, diethyl ether, ethyl vinyl ether, vinyl acetate, acetic anhydride, 1-butanol, 3-buten-1-ol, 1‑hydroxy-butan-2-one, 1‑hydroxy-butan-3-one, 2,3-epoxybutan-1-ol, 3,4-epoxybutan-1-ol, 2-oxetanemethanol, butanone, methyl vinyl ketone, 4H-1,3-dioxine, allyl formate, 2-oxobutanal, 4-hydroxybutanal, 2-methyloxetan-3-one, cis‑but-2-en-1-ol, and trans-2‑but-enal. Uncertainties were quantified in all cases by accounting for errors in gas-phase concentration, experimental repeatability, and signal-to-noise ratio as a function of photon energy. With the exception of 2-oxobutanal, which is reported with an uncertainty of 10%, convolving the sources of error using the root-sum-square method led to an upper limit of 5% uncertainty above the detection limit, which is largely attributable to chemical purity.The primary objective of the present work is to provide absolute cross-sections along with quantified uncertainty limits. The majority of the absorption spectra, which reflect electronic transitions such as σ → σ* and n → σ*, are reported for the first time and provide insight into fundamental chemical physics, such as vibrational band structure and Rydberg transitions. The quantitative spectra in the present work facilitates the discovery of chemical intermediates that support improvement in the accuracy of computational models for low-temperature combustion and atmospheric chemistry.

Poly (vinyl ethers) based on the biomass-derived compound, eugenol, and their one-component, ambient-cured surface coatings

A novel monomer, 2-eugenoloxy ethyl vinyl ether (EEVE), was produced from a renewable bio-based compound, eugenol. EEVE was homopolymerized and copolymerized with cyclohexyl vinyl ether (CHVE) via carbocationic polymerization to produce linear polymers. These eugenol-based polymers were evaluated for their ability to produce alkyd-type surface coatings via autoxidative crosslinking. The EEVE-based polymers can provide several advantages over conventional air-drying alkyd resins such as energy-efficient polymerization, precise control over composition and molar mass, and elimination of issues associated with gelation during polymerization. The EEVE-based coatings showed significantly higher chemical resistance, hardness, glass transition temperature, and Young's modulus compared to a commercial alkyd coating. The base resistance of EEVE-based coatings was significantly improved compared to conventional air-drying alkyd resins. As expected, incorporation of the CHVE to the poly(vinyl ether) polymer backbone significantly increased the glass transition temperature and mechanical properties of the crosslinked networks. The optimum physical and thermomechanical properties for the EEVE/CHVE copolymers were obtained at 25 wt% loading of CHVE monomer. Overall, the results of the study suggest a high potential for these eugenol-derived biobased monomers and polymers for applications in air-drying coatings.

Regioselectivity of [3+2] Cycloadditions of Heteroaryl Azides and Ethyl‐Vinyl Ether

AbstractThe reaction of ethyl vinyl ether with some heteroaryl azides in the presence of MnSO4 affords some unexpected products. In the case of 2‐azido‐1,3‐thiazole an imidate is formed, while 2‐azidobenzothiophene gives an unprecedented 3,3a‐dihydro‐2H‐8‐thia‐1‐aza‐cyclopenta[a]indene system, with loss of the aromaticity of the benzotiophene ring. DFT calculations are performed to justify these structures. Selenophene ‐derived acyl azides on the contrary, afford in two cases N‐heteroaryl carbamates, probably due to the reaction of an intermediate isocyanate and cleavage of the ether linkage.

A theoretical investigation of the regio- and stereoselectivities of the [3 + 2] cycloaddition reaction between ethyl vinyl ether and substituted α-alkoxynitrones

A theoretical investigation of the regio- and stereoselectivities of the [3 + 2] cycloaddition reaction between ethyl vinyl ether and substituted α-alkoxynitrones

Controlled microflow cationic polymerization of vinyl ethers under ambient conditions

Living cationic polymerization is a well-established method for preparing polymers with controlled molecular weights and complex architectures, but rigorous polymerization conditions limit its widespread application. Here, we report a facile strategy for simplifying the strict conditions required for traditional living cationic polymerizations of various vinyl ethers including ethyl vinyl ether (EVE), propyl vinyl ether (PVE), butyl vinyl ether (BVE) and isobutyl vinyl ether (IBVE) by utilizing continuous microflow reactors and a weak Lewis acid, zinc chloride (ZnCl2). Well-defined polymers with controlled molecular weights and narrow molecular weight distributions (<1.20) can be obtained under ambient conditions without monomer purification, temperature control or strictly anhydrous conditions. The living nature of the polymerization was verified by kinetic experiments and successful in situ chain extension.

Photodissociation Dynamics of Vinoxy Radical via the B̃2A″ State: The H + CH2CO Product Channel.

Photodissociation dynamics of the jet-cooled vinoxy radical (CH2CHO) via the B̃2A″ state was studied in the near-ultraviolet (near-UV) region of 308-328 nm using high-n Rydberg H atom time-of-flight (HRTOF) and resonance-enhanced multiphoton ionization (REMPI) techniques. The vinoxy radical beam was produced by 193 nm photolysis of ethyl vinyl ether followed by supersonic expansion. The H + CH2CO product channel was observed directly in the H atom TOF spectra. The H atom photofragment yield (PFY) spectra were obtained by integrating the H atom TOF spectra and measuring the H atom REMPI signals, and showed several vibronic bands of the B̃2A″ state. The translational energy distributions of the H + CH2CO products, P(ET)'s, were obtained at several vibronic transitions. The P(ET) distributions were broad, peaking at a low energy of ∼3500 cm-1. The product translational energy release was moderate; the average translational energy release in the maximum available energy, ⟨fT⟩, was in the range of 0.24-0.27. The product angular distributions in this wavelength region were slightly anisotropic, with the β parameter in the range of 0.10-0.24. The near-UV photodissociation mechanism of the H + CH2CO product channel of the vinoxy radical is consistent with unimolecular dissociation on the electronic ground state (X̃2A″) following internal conversion from the B̃2A″ state to the Ã2A' state and then to the X̃2A″ state (although unimolecular dissociation from the first excited Ã2A' may also contribute).

Turning Flexibility into Rigidity: Stepwise Locking of Interpenetrating Networks in a MOF Crystal through Click Reaction

Post-synthetic modifications of metal–organic frameworks (MOFs) enable synthesis of materials with enhanced performance characteristics or those inaccessible by direct synthetic routes. In this work, for the first time, we utilize inverse-electron demand Diels–Alder (iEDDA) modification to control the structural flexibility and porosity of an open framework material. We selected a series of dienophiles with increasing bulkiness including ethyl vinyl ether (eve), cyclohexene (chx), norbornene (nor), and 5-norbornene-2-methanol (noh) to modify a tetrazine-based linker (3,6-dipyridyl-1,2,4,5-tetrazine, dpt) incorporated in a unique doubly interpenetrated 3D hybrid MOF–HOF porous material (HOF, hydrogen-bonded organic framework), {[Cd2(coh)2(dpt)2]·guests}n (JUK-20). Each subnetwork in JUK-20 is built of 2D coordination layers stacked by strong complementary C═O···H–N hydrogen bonds between carbohydrazide dibenzoate linkers (coh). By using the [4 + 2] click reactions of JUK-20, which proceed in a prominent single-crystal-to-single-crystal manner, we obtained a series of JUK-20-dienophile MOFs. The modifications lead to a stepwise decrease in structural flexibility of the JUK-20 platform until the highest rigidity and stability is reached for JUK-20-noh. Consequently, the adsorption capacity in the JUK-20-dienophile series increases, as revealed collectively by single-crystal X-ray diffraction, physisorption isotherms (N2, CO2, and MeOH), and grand canonical Monte Carlo simulations. Our work demonstrates that post-synthetic iEDDA modification is a versatile and efficient tool for systematic functionalization of open framework materials under mild conditions.

Synthesis of Poly(vinyl ether) with Pendant Phenol Groups through Cationic Polymerization of 2-(4-Acetoxyphenoxy)ethyl Vinyl Ether

Synthesis of Poly(vinyl ether) with Pendant Phenol Groups through Cationic Polymerization of 2-(4-Acetoxyphenoxy)ethyl Vinyl Ether