Acetic Research Articles

Specific and high-affinity adsorption of volatile organic compounds on titanium dioxide surface.

The interaction between metal oxides and volatile organic compounds (VOCs) from the ambient atmosphere plays an important role in environmental and catalytic applications. Previous scanning probe microscopy and x-ray spectroscopy studies revealed surprisingly that the TiO2 [rutile (110)] surface selectively adsorbed atmospheric carboxylic acids, which typically exist in only parts-per-billion concentrations. In this work, we used in situ sum-frequency vibrational spectroscopy to study the interaction between rutile (110) and typical VOC molecules, including formic acid, acetic acid, and formaldehyde. Spectra from all three adsorbed molecules on rutile (110) were similar to the rutile surface spectrum in the ambient atmosphere, showing a broad resonance near 2950cm-1 that can be attributed to the bridging bidentate adsorption of corresponding compounds. In contrast, on a fused silica surface, a molecular monodentate adsorption configuration was observed for all the molecules, with aliphatic carbons appearing to be the dominant adventitious species.

Study Of Diagnostic Efficacy Of Visual Inspection With Acetic Acid (VIA) In Comparison With PAP Smear In Cervical Cancer Screening

Study Of Diagnostic Efficacy Of Visual Inspection With Acetic Acid (VIA) In Comparison With PAP Smear In Cervical Cancer Screening

Flotation of a South African Low-Grade Banded Iron Formation (BIF)

AbstractDue to declining iron ore grades, low-grade ores with complex mineralogy, namely, banded iron formation (BIF), are being explored to maximize iron ore resources and increase the life of mine. Flotation is the standard global process used for the beneficiation of BIF ores, as it is a complex ore reserve, and liberation is typically achieved below 1 mm. This study focuses on flotation of a South African BIF evaluating its response to different collectors, as well as effect of grind. Since flotation is an expensive process and South Africa ranks high on the production cost curve, pre-concentration via gravity or magnetic separation is performed prior to flotation. Thus, flotation was also performed on a gravity concentrate to determine if a grade suitable for steelmaking (~ 63%) is achievable. The results indicate that the use of an alkyl ether amine-based collector partially neutralized with acetic acid is suitable for separation of hematite from illite and quartz at high pH values. Further optimization tests are being pursued to improve overall recovery and grade.

Solar light-driven heterogeneous photocatalytic removal of 2,4 dichlorophenoxy acetic acid from aqueous solution by bio-fabricated SnO2 nanostructure

Solar light-driven heterogeneous photocatalytic removal of 2,4 dichlorophenoxy acetic acid from aqueous solution by bio-fabricated SnO2 nanostructure

In-vivo evaluation of analgesic and anti-inflammatory activities of the 80% methanol extract of Acacia seyal stem bark in rodent models

Abstract Background Pain and inflammation are the major medical condition commonly addressed with traditional remedies. Acacia seyal is a traditional herb widely used in Ethiopian folk medicine for pain management. However, its effectiveness has yet to be validated through scientific or experimental research. Therefore, the current study aims at evaluating the in vivo analgesic and anti-inflammatory effects of 80% methanolic stem bark extract of Acacia seyal in rodent models. Methods After successful extractions of the stem barks of Acacia seyal with 80% methanol, the pain relieving effects of 100, 200 and 400 mg/kg extract were evaluated using acetic acid-induced writhing test and hot plate method whereas the anti-inflammatory profile was determined by carrageenan induced paw-edema model and cotton pellet induced granuloma technique. Results The 80% methanol Acacia seyal stem bark extract exhibited substantial (p < 0.001) analgesic effect in acetic acid induced writing test (p < 0.001). The plant extract also witnessed significant central analgesic effect in hot plate method beginning at 30 min with maximum % elongation time occurred at 120 min. Furthermore, the acacia stem bark extract produced anti-inflammatory effect against carrageenan induced paw-edema model. In cotton pellet induced granuloma model, the 200 and 400 mg/kg doses of the current plant material appeared to inhibit granuloma mass formation and exudate reduction significantly (p < 0.001). Conclusion The collective findings of the current study revealed that 80% methanol extracts of Acacia seyal exhibited considerable analgesic and anti-inflammatory activities, supporting the plant’s traditional use for management of pain and inflammatory disorders.

Modulation of Serum Metabolic Profiles by Bifidobacterium breve BBr60 in Obesity: A Randomized Controlled Trial

Obesity, a prevalent metabolic disorder in youth, leads to complications and economic strain. Gut dysbiosis significantly contributes to obesity and metabolic issues. Bifidobacterium breve, a probiotic strain, may help regulate gut dysbiosis and benefit obese individuals. However, more research is needed on its effect on serum metabolism. A total of 75 overweight or obese young adults (aged 19–45) participated in the current study, and were randomly divided into probiotic and placebo groups using a random number table. Both groups received dietary guidance and underwent twelve weeks of intervention with either oral Bifidobacterium breve BBr60 (BBr60) or a placebo. After the intervention, collection and analysis of fasting serum samples were conducted using mass spectrometry coupled with liquid chromatography. Analyses of associations were conducted in order to determine the correlations between key serum metabolites and clinical obesity indicators, aiming to understand the influence of BBr60. Due to 10 participants dropping out for personal reasons, the study included 32 and 33 participants in the placebo and the BBr60 groups, respectively. The BBr60 intervention significantly regulated 134 serum metabolites and influenced crucial metabolic pathways in obesity management (p < 0.05), including ascorbate and aldarate metabolism for oxidative stress reduction, cholesterol metabolism for lipid regulation, parathyroid hormone synthesis, secretion and action for the endocrine system, oxidative phosphorylation for enhanced energy efficiency, and glycolysis/gluconeogenesis for glucose metabolism. Analysis showed a positive relationship between fasting blood glucose (FBG), aspartate aminotransferase (AST), total protein (TP), and the content of 5-Methyl DL-glutamate (p < 0.05). Similarly, body mass index (BMI), weight, and body fat percentage (BFP) were positively linked to serum metabolites (1-Hydroxycyclohexyl) acetic acid, and 5-Oxooctanoic acid (p < 0.05). Significant associations of AST levels with key serum metabolites in cholesterol metabolism pathways further suggest BBr60’s potential to improve liver function and overall metabolic health in overweight or obese individuals. These findings support BBr60’s effectiveness in modulating serum metabolic profiles and suggest it may improve liver function and BMI in overweight or obese individuals by regulating key serum metabolites.

Analytical Assessment of the Quality of Dietary Supplements and Cosmetic Products Containing Xanthohumol by Thin-Layer Chromatography Along with the Estimation of Its Antioxidant Potential

Xanthohumol, a prenylated chalcone in the flavonoid group, naturally occurs in many plants and exhibits antioxidant, anticancer, anti-inflammatory, antibacterial, and antiviral effects. The growing interest in xanthohumol due to its potential therapeutic properties has led to the increase in the pool of products available on the market. The novelty of this study is the proposal of a rapid and cost-effective procedure useful for performing quality control on products containing xanthohumol in the form of dietary supplements and cosmetics as well as testing their stability. For this purpose, the thin-layer chromatography method with densitometric detection was used, which was validated in accordance with ICH (International Conference on Harmonization) guidelines. The mobile phase was toluene, 1,4-dioxane, and glacial acetic acid (37:10:1.5 v/v/v), and TLC silica gel 60 F254 plates were used as the stationary phase. The validation process assessed linearity, with a correlation coefficient (r) of 0.9987. The calculated LOD (limit of detection) and LOQ (limit of quantification) values were 3.82 and 11.57 ng/spot, respectively. Accuracy was evaluated by determining percentage recovery at three concentration levels (80, 100, and 120%), with an average recovery of 100% and RSD below 1%, confirming good accuracy. Precision was indicated by an RSD of less than 2.20%. The average content of xanthohumol in dietary supplements ranged from about 8 to 29% of the content declared by the manufacturers. The stability tests showed that XN decomposes most slowly in water (t0.5 = 10.86 h) compared with acidic (t0.5 = 10.80 h) and alkaline solutions (t0.5 = 7.39 h), as well as in the presence of an oxidizing agent (t0.5 = 18.38 h), at all tested temperatures, which is confirmed by the calculated kinetic parameters. In the tests of antioxidant capacity, xanthohumol shows significantly higher radical scavenging capacity than vitamin C in the entire range of analyzed concentrations (0.03–2.40 mmol/L).

On the Location and Accessibility of Active Acid Sites in MFI Zeolites Modified by Alkaline Treatment

An MFI zeolite (Si/Al = 40) was desilicated by alkaline treatment in order to generate mesopores. Temperature, alkali concentration and treatment duration were adjusted to maximize mesoporosity while preserving the zeolite structure. Special attention was paid to the characterization of the strength and accessibility of the acid sites. The catalysts were tested in the isobutane/butene alkylation, a reaction that is typically catalyzed by zeolites but limited by coke deposition. Additionally, glycerol esterification with acetic acid was used as a test reaction due to the required participation of large pores. The results confirmed that mesopores were successfully generated in the MFI zeolite, and the diffusion through the solid was enhanced, but the active sites were mainly confined to the micropores.

Properties of Hydrochar Derived from Arabica Coffee Agro-Industry Residues under Wet Torrefaction Method

This study utilized coffee cherry residues, which is an abundantly available source of biomass in Indonesia. One of the methods to utilize coffee plantation residues effectively is wet torrefaction. This method is well-known as a hydrothermal method, where the biomass conversion process uses liquid as a medium and reactant in the process. The objective of this work was to develop an effective procedure for converting coffee agro-waste into marketable products using hydrothermal technology. The information related to changes in physical and thermal properties were explored in this work. To achieve the research objectives, three main steps were performed, i.e., feedstock preparation, wet torrefaction, and hydrochar characterization. Two types of feedstocks were studied in this work, coffee parchment and coffee pulp. In the wet torrefaction process, each feedstock was treated using two types of solutions, i.e., distilled water and acetic acid, at different concentrations. The reaction was carried out in an autoclave with a pressure of 2 bar (g) and an operating temperature of 130 ℃ for 2 hours. The properties of the hydrochar products were then analyzed using various methods, including bomb calorimetry, SEM, density, TGA-DTG, and hydrophobicity analyses. Overall, the results indicated that the hydrochar produced under acetic acid solution had better characteristics compared to that treated under distilled water. In terms of fixed carbon content and calorific value, the values increased up to 25.3% and 4,603 kcal/kg, respectively. Enhanced hydrophobicity was only observed in the coffee parchment hydrochar, where the average time required to adsorb water was 146.6 s, which can be categorized as strongly hydrophobic.

Conversion of Penta‐Acetyl‐Xylitol to 3‐Acetoxymethylene‐Tetrahydrofuran by a Combined Hetero‐/Homogeneous Tandem Catalyst System

A tandem catalyst system comprised of trifluoromethanesulfonic (triflic acid, HOTf) or Hafnium tetratriflate (Hf(OTf)4) and Ru/C in glacial acetic acid (HOAc) as the solvent at 200 °C and ~ 7 MPa hydrogen pressure in a batch reactor converts penta‐acetyl‐xylitol ((2R,3R,4S)‐Pentane‐1,2,3,4,5‐penta‐acetoxy‐pentane) or unprotected xylitol to 3‐acetoxymethylene‐tetrahydrofuran (3‐AMT) in up to 15 % yield at full conversion. A comparative analysis by SEM‐EDS and XPS of the fresh commercial Ru/C catalyst vs catalyst reused and recovered after 5 cycles shows increasing aggregation of ruthenium to larger particles with a concomitant decrease in yield of 3‐AMT to 8‐9 % for cycles 4 and 5. 3‐AMT or its hydrolysis product 3‐hydroxymethyl‐tetrahydrofuran (3‐HMT) are valuable synthons for the preparation of agrochemicals, pharmaceuticals and specialty polyurethanes and polyesters.

Exploring the Cellulose Content on the Thermal and Mechanical Properties of Banana Peel Blend Tapioca Starch Bioplastic

Petrochemical polymers are convenient but harmful to humans and the environment. In response to growing environmental concerns over petroleum-based polymers, this study developed a biodegradable plastic made from tapioca and banana peel starch. Tapioca flour, banana peel starch, and 3g, 6g, and 9g of cellulose were used via solvent cast technique to fabricate bioplastic films. Fourier transform infrared spectroscopy shows strong peaks at 3400-3200 cm-1, corresponding to OH bond stretching vibrations for all obtained films. The bioplastics film displayed good performance in tensile testing when 6g of cellulose was used as compared to other formulations. Thermogravimetric analysis showed that adding cellulose enhanced the thermal properties where the temperature of 139.0394 ℃ (T20) and 140.16 ℃ (T50) shifted to a higher temperature when 9g cellulose was incorporated with the blend matrix. Interesting to note that 3g of cellulose absorbs the most water however 9g loses the least weight. This phenomenon is due to an increase in the cellulose-hydroxyl hydrogen bonding. On the other hand, the modified films are insoluble in acetic acid, moderately soluble in ammonia, and entirely soluble in sulphuric acid for solubility behaviour analysis. The banana peel starch blend and tapioca powder film modified with cellulose bioplastics have the potential to be applied ideally for food packaging.

Synthesis of 2‐(Pentafluoro‐λ6‐sulfanyl)acetamides and Impact of the Fluorinated Group on the Lipophilicity

AbstractThe synthesis of 2‐(pentafluoro‐λ6‐sulfanyl)acetamides is described via an amidation reaction between 2‐(pentafluoro‐λ6‐sulfanyl)acetic acid, the SF5‐containing building block, and various amines. A total of 27 examples of SF5‐containing amides were synthesized, with isolated yields going from 43 % to quantitative. We showed that a 2‐(pentafluoro‐λ6‐sulfanyl)acetamide could be converted to a N‐(2‐SF5‐ethyl)amine and a SF5‐containing oxadiazoles. Finally, the effect of the SF5 substituent on the lipophilicity of the amide of a model compound was evaluated.

Production of a cellulose-aminating polysaccharide from a filamentous sulfur-oxidizing bacterium, Thiothrix nivea, grown lithotrophically or mixotrophically.

Glucosaminoglucan (β-1,4-linked glucose and glucosamine) produced by a mixotrophic sulfur-oxidizing bacterium, Thiothrix nivea, is a useful cellulose-aminating agent. Lithotrophic and mixotrophic glucosaminoglucan production were examined using fed-batch techniques. A jar fermenter was used for the fed-batch cultivation. Glucosaminoglucan was extracted from T. nivea using diluted HCl. Lithotrophic growth was detected by feeding with Na2S as the energy source, and 12mg L-culture-1 of glucosaminoglucan was obtained. In contrast, no growth was observed with Na2S2O3. Similarly, mixotrophic growth in the presence of acetic acid was promoted by Na2S, whereas Na2S2O3 had no effect. When acetic acid and Na2S were added, 470mg L-culture-1 of glucosaminoglucan was obtained. T. nivea was cultured and glucosaminoglucan was produced lithotrophically using Na2S for feeding. Na2S is also indispensable for mixotrophic growth and glucosaminoglucan production, indicating that sulfide oxidation pathways control the TCA cycle. The involvement of the SOX pathway (for thiosulfate oxidation) in the activation of energy metabolism is doubtful because neither lithotrophic nor mixotrophic growth was promoted by Na2S2O3. Based on these results, we assumed that T. nivea is facultatively mixotrophic (lithotrophic growth is possible in addition to organotrophic growth in the presence of sulfide (Na2S)), rather than obligately mixotrophic.

Carbon-mediated modulation pathways of phytotoxicity in chicken manure composting.

Compost phytotoxicity affects the safety of organic fertilizers returned to the field, thus hindering the breeding cycle, so it is essential to reduce the compost phytotoxicity. The phytotoxicity of compost was estimated utilizing the germination index (GI) and the aqueous substances (organics and ions) present in compost correlated closely with GI. This study assessed the effect of carbon additives from different plant sources (mushroom substrates (MS), cornstalks (CS) and garden substrates (GS)) on maturity parameters (temperature, pH, EC, C/N), content of aqueous carbon and nitrogen matters, salt ions, heavy metal ions, and microbiome of piles when composting with chicken manure and especially focused on their effect on GI. Results showed that all additives significantly improved GI (85.25%-106.28%). The primary factors influencing seed germination were Mg2+ and SO42- in CM compost, acetic acid and NH4+ in CM+MS compost, humic acid in CM+CS compost, and dissolved total nitrogen in CM+GS compost. During composting, the growth of heavy metal passivating bacteria (Bacillus) and organic matter degrading bacteria (Desemzia and Turicibacter) can be promoted by decreasing aqueous carbon and nitrogen substances (volatile fatty acids, NH4+, dissolved total nitrogen, amino acids) and increasing the content of humic acid, which improved the composting environment and provided favourable conditions for the germination of seeds, thereby increasing GI. Therefore, GS showed the best potential for accelerating degradation of organic matter and improving GI during composting with chicken manure.

Scrutinizing harsh habitats endophytic fungi and their prospective effect on water-stressed maize seedlings.

Drought constitutes a significant abiotic stressor that hinders plant growth and productivity in many countries. Habitat-adapted endophytic fungi offer an environmentally sustainable approach to address this issue by promoting plant development and enhancing resilience against abiotic stresses. In this study, 30 endophytic fungal isolates were recovered from some wild plants in the extreme habitats of Port Said Governorate, Egypt, and evaluated for their drought tolerance using polyethylene glycol (PEG-6000). Only eight isolates demonstrated drought tolerance properties and were further evaluated for their plant growth-promoting biochemical activities and ability to improve maize germination under simulated drought conditions. All eight isolates exhibited enzyme activity for endo-1,4-β-glucanase, amylase, and pectinase, and most displayed significant nutrient mobilization, with siderophores production ranging from 4 to 89%, ammonia production from 1 to 7μmol/ml, and phosphate solubilization from 129to 256µg/ml. Additionally, all isolates showed strong antioxidant activity and high total phenolic content, with some also producing notable levels of indole acetic acid (IAA) and gibberellic acid (GA3) as plant growth hormones. Coating maize grains with spore suspensions of the eight fungal isolates, in general, significantly increased their germination parameters and seedling vigor in vitro under 8% PEG-6000. This enhancement was particularly pronounced with Neurospora sitophila (P8L4M1) and Penicillium tardochrysogenum (P15L4M1), which increased the vigor of maize seedlings by approximately 308% compared to untreated control. Molecular identification of P8L4M1 and P15L4M1 was performed by amplifying the 28S rRNA gene. This study disclosed unique endophytic fungal isolates with promising potential for enhancing drought resistance in maize.

Effects of adding niacinamide to diets with normal and low protein levels on the immunity, antioxidant, and intestinal microbiota in growing-finishing pigs.

This study aimed to investigate the effects of nicotinamide (NAM) applied to diets with different crude protein levels on immune function, antioxidant capacity, and intestinal flora in growing-finishing pigs. Forty barrows (37.0 ± 1.0 kg) were randomly allocated to one of four dietary treatments (n = 10 per group). The diets in the two phases consisted of a basal diet with 30 mg/kg NAM, a basal diet with 360 mg/kg NAM, a low-protein diet with 30 mg/kg NAM, and a low-protein diet with 360 mg/kg NAM. The results showed that dietary addition of 360 mg/kg NAM decreased IL-12, malondialdehyde, IgG and IgM contents in the plasma and increased total superoxide dismutase activity and total antioxidant capacity in the colonic mucosa (P < 0.05). Supplementing the diet with 360 mg/kg NAM increased mRNA expression of the nucleotide-binding oligomerization domain containing 2 and nuclear factor erythroid 2-related factor 2 and protein expression of nuclear factor kappa-B and toll-like receptor 4 in the colonic mucosa (P < 0.05). The concentrations of acetic acid and butyric acid in the colonic contents and the abundance of Actinobacteriota in the colon at the phylum level were significantly decreased by feeding low-protein diets (P < 0.05). Additionally, the addition of 360 mg/kg NAM to diets increased (P < 0.05) the Sobs, Ace, and Chao indices of colonic microorganisms in pigs. Overall, the rational use of NAM can improve inflammatory status, enhance antioxidant capacity and intestinal barrier function, and increase colonic microbial diversity in growing-finishing pigs.

Exploring the interplay between yeast cell membrane lipid adaptation and physiological response to acetic acid stress.

In the present study, we successfully engineered a yeast strain that could grow under high acetic acid stress by regulating its diacylglycerol metabolism. We compared how the plasma membrane and total cell membranes responded to acetic acid by adjusting their lipid content. By combining physiological and lipidomics analyses in cells cultivated in the absence or presence of acetic acid, we found that the capacity of the membrane to adapt lipid composition together with sufficient energy supply influenced membrane properties in response to stress. We suggest that potentiating the intracellular energy system or enhancing lipid transport to destination membranes should be taken into account when designing membrane engineering strategies. The findings highlight new directions for future yeast cell factory engineering.

Effect of Dietary Xylanase Inclusion on Growth Performance, Nutrient Digestibility, and Digesta Viscosity of Weaned Pigs Fed Wheat–Soybean Meal-Based Diets

(1) Background: This study aimed to evaluate the effects of dietary xylanase addition on growth performance, nutrient digestibility, volatile fatty acids, and digesta viscosity at different digestive sites in weaned pigs fed wheat–soybean meal-based diets with reduced metabolizable energy. (2) Methods: A total of 312 weaned pigs (5.1 ± 0.9 kg, 20 ± 2 days of age) were assigned to one of six dietary treatments. The experimental diets were formulated in a three-phase nursery feeding program: phase 1 (d0–d7), phase 2 (d8–d21), and phase 3 (d22–d42). The experimental diets consisted of a wheat–soybean meal-based diet formulated to meet pig requirements (positive control, PC); the PC diet with a reduction of 100 kcal of metabolizable energy (ME) (negative control, NC); and the NC diet with either 900, 1800, 3600, or 7200 units of xylanase. Feed disappearance and body weight were measured at d7, 14, 21, and 42 in the nursery phase. The pen fecal score was assessed daily from d0 to d14 and three times a week from d15 to d28. On d21–d24 of the experiment (12 pigs per day), one pig per pen was selected for sample collection: ileal, cecal, and mid-colon digesta for viscosity and ileal digesta, feces for nutrient digestibility, and feces and cecal digesta for the measurement of volatile fatty acid. (3) Results: The addition of xylanase to the NC diets did not improve pig growth performance (body weight, feed conversion ratio, and average daily gain; p &gt; 0.10) during the entire nursery phase. In Week 2 and Week 3, pigs fed xylanase had a lower (χ2 &lt; 0.05) incidence of fecal scores 3 and 4 (diarrhea) than the PC and NC diets. In addition, the apparent total tract digestibility of neutral detergent fiber and acid detergent fiber increased linearly (p &lt; 0.1) in response to xylanase addition. Xylanase addition (900 to 7200 U) decreased digesta viscosity in the colon compared to the PC and NC diets. Furthermore, xylanase addition resulted in a lower (p &lt; 0.05) concentration of acetic, propionic, butyric, valeric, and total volatile fatty acid in cecal samples compared to PC. The addition of xylanase resulted in greater acetic and valeric acid concentrations in cecal samples compared to the NC group (p &lt; 0.10). (4) Conclusions: Xylanase addition can improve nutrient digestibility, particularly at the total tract level, and reduce viscosity in the hindgut, which could be related to decreasing the occurrence of looseness. However, its impact on growth performance was minimal in wheat–soybean meal-based diets with a reduction of 100 kcal of ME.

Antiseptic Surface Based on Antibacterial Polyethylene Composites with Silver Fillers: Stability in Aqueous Solution

One method to reduce the spread of pathogens is to use clean surfaces. These have long-acting components, and their use would reduce the massive consumption of disinfectants and cleaning products. In order to ensure the safety of these surfaces in water-based systems and prevent mishandling and potential health and environmental risks, this study analyzed the stability of clean surfaces made of polyethylene with three silver compounds with different water solubility. The surfaces were subjected to erosion at 40 °C by immersing them in aqueous solutions of 3% acetic acid (w/v), 50% ethanol (v/v), and deionized water. The ionic silver release was monitored in real-time in situ via voltammetry using an Ag/S2− electrode. Analytical methods such as Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) were employed to elucidate the surface alteration. The plastic residue after immersion varied depending on the pH and the type of solvent used, with a higher plastic migration observed when in contact with the water-ethanol mixture. Furthermore, a correlation was identified between surface stability, oxygen composition in the antibacterial, and water solubility, influencing increased surface oxidation.

Aerobic Stability of High-Moisture Corn Ensiled with Lactiplantibacillus plantarum During Prolonged Air Exposure

The evaluation of the aerobic stability of silages primarily involves monitoring temperature, while changes in composition are often neglected. In the present study, the effect of aeration on high-moisture corn ensiled with Lactiplantibacillus plantarum was investigated and compared with that of the control without inoculant. The corn used in this study was grown in five plots in a split-plot experimental design, and each plot represented the repetition of silage preparation, both with and without inoculant. In the silages, the temperature changes and the content of acids and alcohols were monitored during the 6 days of aeration, while the content of the main nutrients was compared before and after 6 days of aeration. The temperature difference between the silages and the environment was below 3 °C during the entire aeration period, regardless of the ensiling method. The content of lactic acid was higher in L. plantarum silages, while the contents of acetic and propionic acid, methanol and ethanol were higher in the control (p &lt; 0.001). The content of all compounds changed during the aeration period (p &lt; 0.05), regardless of the ensiling method and the stable silage temperature. Aeration affected the content of soluble crude protein and starch (p &lt; 0.05), suggesting starch degradation in high-moisture corn during aeration. Therefore, in addition to monitoring silage temperature, monitoring lactic and acetic acid and the main nutrients should be considered, as the nutritional value of high-moisture corn could decrease during aeration.