Equivalent Active Sites Research Articles

Human selenocysteine synthase, SEPSECS, has evolved to optimize binding of a tRNA-based substrate.

The evolution of the genetic code to incorporate selenocysteine (Sec) enabled the development of a selenoproteome in all domains of life. O-phosphoseryl-tRNASec selenium transferase (SepSecS) catalyzes the terminal reaction of Sec synthesis on tRNASec in archaea and eukaryotes. Despite harboring four equivalent active sites, human SEPSECS binds no more than two tRNASec molecules. Though, the basis for this asymmetry remains poorly understood. In humans, an acidic, C-terminal, α-helical extension precludes additional tRNA-binding events in two of the enzyme monomers, stabilizing the SEPSECS•tRNASec complex. However, the existence of a helix exclusively in vertebrates raised questions about the evolution of the tRNA-binding mechanism in SEPSECS and the origin of its C-terminal extension. Herein, using a comparative structural and phylogenetic analysis, we show that the tRNA-binding motifs in SEPSECS are poorly conserved across species. Consequently, in contrast to mammalian SEPSECS, the archaeal ortholog cannot bind unacylated tRNASec and requires an aminoacyl group. Moreover, the C-terminal α-helix 16 is a mammalian innovation, and its absence causes aggregation of the SEPSECS•tRNASec complex at low tRNA concentrations. Altogether, we propose SEPSECS evolved a tRNASec binding mechanism as a crucial functional and structural feature, allowing for additional levels of regulation of Sec and selenoprotein synthesis.

Adsorptive removal of Cr (VI) from aqueous solution using laboratory prepared ZnO nanoparticles

Nano sized zinc oxide (ZnO) been successfully prepared in laboratory by precipitation technique. As prepared ZnO materials were characterized by XRD and SEM analyses. The XRD pattern showed the crystallinity of the material and average crystallite size was found to be 16.61 nm. The SEM images of ZnO nanoparticle revealed that it was flakes like structure having smooth texture. Batch adsorption experiments were performed to investigate the percentage removal of Cr (VI) from aqueous solution. The effects of Cr (VI) concentration, pH of solution, adsorbent dose and contact time variations were studied in order to have adsorptive efficiency of as prepared ZnO nanoparticles. The optimum contact time for maximum adsorption was found to be 90 minutes. The optimum pH was found to be 2.0 at an initial concentration of 20 mg/L. Similarly, the optimum dose of ZnO for the adsorption of Cr (VI) was found to be 0.4 g. The adsorption properties of ZnO were then evaluated by using Langmuir, Freundlich and Temkin isotherm models. The maximum adsorption capacity (Qm) was found to be 3.43 mg/g which is in good agreement with literature value. The correlation value showed that Langmuir isotherm model was found to be more favorable than Freundlich and Temkin adsorption isotherm model, indicating the presence of homogeneous equivalent active sites in ZnO with monolayer adsorption.

Modulation of the monomer-dimer equilibrium and catalytic activity of SARS-CoV-2 main protease by a transition-state analog inhibitor

The role of dimer formation for the onset of catalytic activity of SARS-CoV-2 main protease (MProWT) was assessed using a predominantly monomeric mutant (MProM). Rates of MProWT and MProM catalyzed hydrolyses display substrate saturation kinetics and second-order dependency on the protein concentration. The addition of the prodrug GC376, an inhibitor of MProWT, to MProM leads to an increase in the dimer population and catalytic activity with increasing inhibitor concentration. The activity reaches a maximum corresponding to a dimer population in which one active site is occupied by the inhibitor and the other is available for catalytic activity. This phase is followed by a decrease in catalytic activity due to the inhibitor competing with the substrate. Detailed kinetics and equilibrium analyses are presented and a modified Michaelis-Menten equation accounts for the results. These observations provide conclusive evidence that dimer formation is coupled to catalytic activity represented by two equivalent active sites.

Structure of GTP cyclohydrolase I from Listeria monocytogenes, a potential anti-infective drug target.

A putative open reading frame encoding GTP cyclohydrolase I from Listeria monocytogenes was expressed in a recombinant Escherichia coli strain. The recombinant protein was purified and was confirmed to convert GTP to dihydroneopterin triphosphate (Km = 53 µM; vmax = 180 nmol mg-1 min-1). Theprotein was crystallized from 1.3 M sodium citrate pH 7.3 and the crystal structure was solved at a resolution of 2.4 Å (Rfree = 0.226) by molecular replacement using human GTP cyclohydrolase I as a template. The protein is a D5-symmetric decamer with ten topologically equivalent active sites. Screening a small library of about 9000 compounds afforded several inhibitors with IC50 values in the low-micromolar range. Several inhibitors had significant selectivity with regard to human GTP cyclohydrolase I. Hence, GTP cyclohydrolase I may be a potential target for novel drugs directed at microbial infections, including listeriosis, a rare disease with high mortality.

How Intrinsic Dynamics Mediates the Allosteric Mechanism in the ABC Transporter Nucleotide Binding Domain Dimer.

A protein's architecture facilitates specific motions-intrinsic dynamic modes-that are employed to effect function. Here we used molecular dynamics (MD) simulations to investigate the dynamics of the MJ0796 ABC transporter nucleotide-binding domain (NBD). ABC transporter NBDs form a rotationally symmetric dimer whereby two equivalent active sites are formed at their interface; in complex with a dimer of transmembrane domains they hydrolyze ATP to energize translocation of substrates across cellular membranes. Our data suggest the ABC NBD's ensemble of functional states can be understood predominately in terms of conformational changes between its major subdomains, occurring along two orthogonal dynamic modes. The data show that ligands and oligomeric interactions modulate the equilibrium conformation of the NBD with respect to these motions, suggesting that allostery is achieved by affecting the energetic profile along these two modes. The observed dynamics and allostery integrate consonantly and logically within a mechanistic framework for the ABC NBD dimer, which is supported by a large body of experimental and theoretical data, providing a higher resolution view of the enzyme's dynamic cycle. Our study shows how valuable mechanistic inferences can be derived from accessible short-time scale MD simulations of an enzyme's substructures.

Barrel-shaped ClpP Proteases Display Attenuated Cleavage Specificities.

ClpP is a self-compartmentalizing protease with crucial roles in bacterial and mitochondrial protein quality control. Although the ClpP homocomplex is composed of 14 equivalent active sites, it degrades a multitude of substrates to small peptides, demonstrating its capability to carry out diverse cleavage reactions. Here, we show that ClpP proteases from E. coli, S. aureus, and human mitochondria exhibit preferences for certain amino acids in the P1, P2, and P3 positions using a tailored fluorogenic substrate library. However, this high specificity is not retained during proteolysis of endogenous substrates as shown by mass spectrometric analysis of peptides produced in ClpXP-mediated degradation reactions. Our data suggest a mechanism that implicates the barrel-shaped architecture of ClpP not only in shielding the active sites to prevent uncontrolled proteolysis but also in providing high local substrate concentrations to enable efficient proteolytic processing. Furthermore, we introduce customized fluorogenic substrates with unnatural amino acids that greatly surpass the sensitivity of previously used tools. We used these to profile the activity of cancer-patient- and Perrault-syndrome-derived ClpP mutant proteins.

Master equation approach to single oligomeric enzyme catalysis: Mechanically controlled further catalysis

Motivated by the single molecule enzymatic experiments, we have provided a master equation description of enzyme catalysis in a chemiostatic condition for an immobilized oligomeric molecule with many equivalent active sites. The random attachment and detachment of substrate molecules on the various active sites of the oligomeric enzyme is studied in terms of the classical parameters of the Michaelis-Menten type process. In the limit of single molecule process, the master equation approach gives the result of waiting time distribution. On the other hand, for a large number of equivalent active sites or a few numbers of active sites with large Michaelis constant, the master equation gives a Poisson distribution in the nonequilibrium steady state. For the oligomeric enzyme, the net rate of the reaction in the nonequilibrium steady state is multiplied by the number of active sites which is further enhanced by more than two orders of magnitude with the application of external force of 10-100 pN through the techniques of atomic force microscopy. Substrate flux and reaction rate constants have interesting consequences on the dynamics and at nonequilibrium steady state which can be the controlling factors for macroscopic biochemical processes.

Segmental motions of rat thymidylate synthase leading to half‐the‐sites behavior

Thymidylate synthase (TS) is a homodimeric enzyme with two equivalent active sites composed of residues from both subunits. Despite the structural symmetry of the enzyme, certain experimental results are consistent with half-the-sites activity, suggesting negative cooperativity between the active sites. To gain insight into the mechanism behind this phenomenon, we explore segmental motions of rat TS in the absence of ligands, with normal mode analysis as a tool. Using solvent accessible surface area of the active site pocket as a monitor of the degree of opening of the active sites, we classified the first 25 nontrivial normal modes, obtained from the web server of the program ElNémo, according to the behavior of the active sites. We found seven modes that open and close both sites symmetrically and nine that do so in an anticorrelated fashion. We characterized the motions of these modes by visual inspection and through measurement of distances between selected atoms lining the active site pockets. The segments that regulate access to the active site correspond to the loop containing R44, helix K, and a long loop containing residues 103-125, in agreement with a large body of crystallographic studies. These elements can be activated together or in isolation. There are more asymmetric modes than symmetric ones in the set we analyzed, probably accounting for the half-the-sites behavior of the enzyme. Three of the asymmetric modes result in changes at the dimer interface and indicate the endpoints of possible communication pathways between the active sites.

Molecular Modeling and Site-Directed Mutagenesis Reveal Essential Residues for Catalysis in a Prokaryote-Type Aspartate Aminotransferase

We recently reported that aspartate (Asp) biosynthesis in plant chloroplasts is catalyzed by two different Asp aminotransferases (AAT): a previously characterized eukaryote type and a prokaryote type (PT-AAT) similar to bacterial and archaebacterial enzymes. The available molecular and kinetic data suggest that the eukaryote-type AAT is involved in the shuttling of reducing equivalents through the plastidic membrane, whereas the PT-AAT could be involved in the biosynthesis of the Asp-derived amino acids inside the organelle. In this work, a comparative modeling of the PT-AAT enzyme from Pinus pinaster (PpAAT) was performed using x-ray structures of a bacterial AAT (Thermus thermophilus; Protein Data Bank accession nos. 1BJW and 1BKG) as templates. We computed a three-dimensional folding model of this plant homodimeric enzyme that has been used to investigate the functional importance of key amino acid residues in its active center. The overall structure of the model is similar to the one described for other AAT enzymes, from eukaryotic and prokaryotic sources, with two equivalent active sites each formed by residues of both subunits of the homodimer. Moreover, PpAAT monomers folded into one large and one small domain. However, PpAAT enzyme showed unique structural and functional characteristics that have been specifically described in the AATs from the prokaryotes Phormidium lapideum and T. thermophilus, such as those involved in the recognition of the substrate side chain or the "open-to-closed" transition following substrate binding. These predicted characteristics have been substantiated by site-direct mutagenesis analyses, and several critical residues (valine-206, serine-207, glutamine-346, glutamate-210, and phenylalanine-450) were identified and functionally characterized. The reported data represent a valuable resource to understand the function of this enzyme in plant amino acid metabolism.

Structures of Ternary Complexes of BphK, a Bacterial Glutathione S-Transferase That Reductively Dechlorinates Polychlorinated Biphenyl Metabolites

Prokaryotic glutathione S-transferases are as diverse as their eukaryotic counterparts but are much less well characterized. BphK from Burkholderia xenovorans LB400 consumes two GSH molecules to reductively dehalogenate chlorinated 2-hydroxy-6-oxo-6-phenyl-2,4-dienoates (HOPDAs), inhibitory polychlorinated biphenyl metabolites. Crystallographic structures of two ternary complexes of BphK were solved to a resolution of 2.1A. In the BphK-GSH-HOPDA complex, GSH and HOPDA molecules occupy the G- and H-subsites, respectively. The thiol nucleophile of the GSH molecule is positioned for SN2 attack at carbon 3 of the bound HOPDA. The respective sulfur atoms of conserved Cys-10 and the bound GSH are within 3.0A, consistent with product release and the formation of a mixed disulfide intermediate. In the BphK-(GSH)2 complex, a GSH molecule occupies each of the two subsites. The three sulfur atoms of the two GSH molecules and Cys-10 are aligned suitably for a disulfide exchange reaction that would regenerate the resting enzyme and yield disulfide-linked GSH molecules. A second conserved residue, His-106, is adjacent to the thiols of Cys-10 and the GSH bound to the G-subsite and thus may stabilize a transition state in the disulfide exchange reaction. Overall, the structures support and elaborate a proposed dehalogenation mechanism for BphK and provide insight into the plasticity of the H-subsite.

Biosynthesis of Tetrahydrofolate in Plants: Crystal Structure of 7,8-Dihydroneopterin Aldolase from Arabidopsis thaliana Reveals a Novel Adolase Class

Dihydroneopterin aldolase (DHNA) catalyses a retroaldol reaction yielding 6-hydroxymethyl-7,8-dihydropterin, a biosynthetic precursor of the vitamin, tetrahydrofolate. The enzyme is a potential target for antimicrobial and anti-parasite chemotherapy. A gene specifying a dihydroneopterin aldolase from Arabidopsis thaliana was expressed in a recombinant Escherichia coli strain. The recombinant protein was purified to apparent homogeneity and crystallised using polyethylenglycol as the precipitating agent. The crystal structure was solved by X-ray diffraction analysis at 2.2 Å resolution. The enzyme forms a D4-symmetric homooctamer. Each polypeptide chain is folded into a single domain comprising an antiparallel four-stranded β-sheet and two long α-helices. Four monomers are arranged in a tetrameric ring, and two of these rings form a hollow cylinder. Well defined purine derivatives are found at all eight topologically equivalent active sites. The subunit fold of the enzyme is related to substructures of dihydroneopterin triphosphate epimerase, GTP cyclohydrolase I, and pyruvoyltetrahydropterin synthase, which are all involved in the biosynthesis of pteridine type cofactors, and to urate oxidase, although some members of that superfamily have no detectable sequence similarity. Due to structural and mechanistical differences of DHNA in comparison with class I and class II aldolases, a new aldolase class is proposed.

Structure of the isoaspartyl peptidase with L-asparaginase activity from Escherichia coli.

The crystal structure of the Escherichia coli enzyme (EcAIII) with isoaspartyl dipeptidase and L-asparaginase activity has been solved and refined to a resolution of 1.65 angstroms, with crystallographic R-factor and Rfree values of 0.178 and 0.209, respectively. EcAIII belongs to the family of N-terminal hydrolases. The amino-acid sequence of EcAIII is homologous to those of putative asparaginases from plants. The structure of EcAIII is similar to the structures of glycosylasparaginases. The mature and catalytically active form of EcAIII is a heterotetramer consisting of two alpha-subunits and two beta-subunits. Both of the equivalent active sites present in the EcAIII tetramer is assisted by a metal-binding site. The metal cations, modelled here as Na+, have not previously been observed in glycosylasparaginases. This reported structure helps to explain the inability of EcAIII and other plant-type asparaginases to hydrolyze N4-(beta-N-acetylglucosaminyl)-L-asparagine, the substrate of glycosylasparaginases.

Biosynthesis of Tetrahydrofolate in Plants: Crystal Structure of 7,8-Dihydroneopterin Aldolase from Arabidopsis thaliana Reveals a Novel Adolase Class

Dihydroneopterin aldolase (DHNA) catalyses a retroaldol reaction yielding 6-hydroxymethyl-7,8-dihydropterin, a biosynthetic precursor of the vitamin, tetrahydrofolate. The enzyme is a potential target for antimicrobial and anti-parasite chemotherapy. A gene specifying a dihydroneopterin aldolase from Arabidopsis thaliana was expressed in a recombinant Escherichia coli strain. The recombinant protein was purified to apparent homogeneity and crystallised using polyethylenglycol as the precipitating agent. The crystal structure was solved by X-ray diffraction analysis at 2.2Å resolution. The enzyme forms a D4-symmetric homooctamer. Each polypeptide chain is folded into a single domain comprising an antiparallel four-stranded β-sheet and two long α-helices. Four monomers are arranged in a tetrameric ring, and two of these rings form a hollow cylinder. Well defined purine derivatives are found at all eight topologically equivalent active sites. The subunit fold of the enzyme is related to substructures of dihydroneopterin triphosphate epimerase, GTP cyclohydrolase I, and pyruvoyltetrahydropterin synthase, which are all involved in the biosynthesis of pteridine type cofactors, and to urate oxidase, although some members of that superfamily have no detectable sequence similarity. Due to structural and mechanistical differences of DHNA in comparison with class I and class II aldolases, a new aldolase class is proposed.

High Order Quaternary Arrangement Confers Increased Structural Stability to Brucella sp. Lumazine Synthase

The penultimate step in the pathway of riboflavin biosynthesis is catalyzed by the enzyme lumazine synthase (LS). One of the most distinctive characteristics of this enzyme is the structural quaternary divergence found in different species. The protein exists as pentameric and icosahedral forms, built from practically the same structural monomeric unit. The pentameric structure is formed by five 18-kDa monomers, each extensively contacting neighboring monomers. The icosahedrical structure consists of 60 LS monomers arranged as 12 pentamers giving rise to a capsid exhibiting icosahedral 532 symmetry. In all lumazine synthases studied, the topologically equivalent active sites are located at the interfaces between adjacent subunits in the pentameric modules. The Brucella sp. lumazine synthase (BLS) sequence clearly diverges from pentameric and icosahedric enzymes. This unusual divergence prompted us to further investigate its quaternary arrangement. In the present work, we demonstrate by means of solution light scattering and x-ray structural analyses that BLS assembles as a very stable dimer of pentamers, representing a third category of quaternary assembly for lumazine synthases. We also describe by spectroscopic studies the thermodynamic stability of this oligomeric protein and postulate a mechanism for dissociation/unfolding of this macromolecular assembly. The higher molecular order of BLS increases its stability 20 degrees C compared with pentameric lumazine synthases. The decameric arrangement described in this work highlights the importance of quaternary interactions in the stabilization of proteins.

Structure and properties of an engineered transketolase from maize.

The gene specifying plastid transketolase (TK) of maize (Zea mays) was cloned from a cDNA library by southern blotting using a heterologous probe from sorghum (Sorghum bicolor). A recombinant fusion protein comprising thioredoxin of Escherichia coli and mature TK of maize was expressed at a high level in E. coli and cleaved with thrombin, affording plastid TK. The protein in complex with thiamine pyrophoshate was crystallized, and its structure was solved by molecular replacement. The enzyme is a C2 symmetric homodimer closely similar to the enzyme from yeast (Saccharomyces cerevisiae). Each subunit is folded into three domains. The two topologically equivalent active sites are located in the subunit interface region and resemble those of the yeast enzyme.

Functional asymmetry in the lysyl-tRNA synthetase explored by molecular dynamics, free energy calculations and experiment

BackgroundCharging of transfer-RNA with cognate amino acid is accomplished by the aminoacyl-tRNA synthetases, and proceeds through an aminoacyl adenylate intermediate. The lysyl-tRNA synthetase has evolved an active site that specifically binds lysine and ATP. Previous molecular dynamics simulations of the heat-inducible Escherichia coli lysyl-tRNA synthetase, LysU, have revealed differences in the binding of ATP and aspects of asymmetry between the nominally equivalent active sites of this dimeric enzyme. The possibility that this asymmetry results in different binding affinities for the ligands is addressed here by a parallel computational and biochemical study.ResultsBiochemical experiments employing isothermal calorimetry, steady-state fluorescence and circular dichroism are used to determine the order and stoichiometries of the lysine and nucleotide binding events, and the associated thermodynamic parameters. An ordered mechanism of substrate addition is found, with lysine having to bind prior to the nucleotide in a magnesium dependent process. Two lysines are found to bind per dimer, and trigger a large conformational change. Subsequent nucleotide binding causes little structural rearrangement and crucially only occurs at a single catalytic site, in accord with the simulations.Molecular dynamics based free energy calculations of the ATP binding process are used to determine the binding affinities of each site. Significant differences in ATP binding affinities are observed, with only one active site capable of realizing the experimental binding free energy. Half-of-the-sites models in which the nucleotide is only present at one active site achieve their full binding potential irrespective of the subunit choice. This strongly suggests the involvement of an anti-cooperative mechanism. Pathways for relaying information between the two active sites are proposed.ConclusionsThe asymmetry uncovered here appears to be a common feature of oligomeric aminoacyl-tRNA synthetases, and may play an important functional role. We suggest a manner in which catalytic efficiency could be improved by LysU operating in an alternating sites mechanism.

Inhibition of human placenta glutathione transferase P1-1 by the antibiotic calvatic acid and its diazocyanide analogue--evidence for multiple catalytic intermediates.

The inhibition mechanism of the dimeric human placenta glutathione transferase (GST) P1-1 by calvatic acid and the reaction intermediates, i.e. the diazocyanide analogue of calvatic acid, has been investigated at pH 7.0 and 30.0 degrees C. Experiments performed at different molar ratios of inhibitor/GST P1-1 indicate that 1 mol calvatic acid inactivates 1 mol GST P1-1, containing two catalytically equivalent active sites. However, 2 mol of the diazocyanide analogue of calvatic acid inactivate 1 mol GST P1-1. Two disulfide bridges/dimer, probably between Cys47 and Cys101, have been formed during the reaction of GST P1-1 with calvatic acid and its diazocyanide analogue. The apparent second-order rate constants for GST P1-1 inactivation by calvatic acid and its diazocyanide analogue are 2.4+/-0.3 M(-1) s(-1) and (8.5+/-0.7) x 10(3) M(-1) s(-1), respectively. The reaction of calvatic acid with free L-cysteine can be described by a simple process with an apparent second-order rate constant of (5.0+/-0.4) x 10(1) M(-1) s(-1). In contrast, a transient species occurs during the reaction of the diazocyanide analogue of calvatic acid with free L-cysteine. Kinetics may be described by a second-order process [the rate constant being (8.0+/-0.5) x 10(3) M(-1) s(-1)] followed by a first-order decay [the rate constant corresponding to (1.2+/-0.1) x 10(1) s(-1)]. Calvatic acid represents an enzyme inhibitor acting much slower than its reaction intermediates (i.e. its diazocyanide analogue).

Active site topology and reaction mechanism of GTP cyclohydrolase I.

GTP cyclohydrolase I of Escherichia coli is a torus-shaped homodecamer with D5 symmetry and catalyzes a complex ring expansion reaction conducive to the formation of dihydroneopterin triphosphate from GTP. The x-ray structure of a complex of the enzyme with the substrate analog, dGTP, bound at the active site was determined at a resolution of 3 A. In the decamer, 10 equivalent active sites are present, each of which contains a 10-A deep pocket formed by surface areas of 3 adjacent subunits. The substrate forms a complex hydrogen bond network with the protein. Active site residues were modified by site-directed mutagenesis, and enzyme activities of the mutant proteins were measured. On this basis, a mechanism of the enzyme-catalyzed reaction is proposed. Cleavage of the imidazole ring is initiated by protonation of N7 by His-179 followed by the attack of water at C8 of the purine system. Cystine Cys-110 Cys-181 may be involved in this reaction step. Opening of the imidazole ring may be in concert with cleavage of the furanose ring to generate a Schiff's base from the glycoside. The gamma-phosphate of GTP may be involved in the subsequent Amadori rearrangement of the carbohydrate side chain by activating the hydroxyl group of Ser-135.

Crystal structure of DCoH, a bifunctional, protein-binding transcriptional coactivator.

DCoH, the dimerization cofactor of hepatocyte nuclear factor-1, stimulates gene expression by associating with specific DNA binding proteins and also catalyzes the dehydration of the biopterin cofactor of phenylalanine hydroxylase. The x-ray crystal structure determined at 3 angstrom resolution reveals that DCoH forms a tetramer containing two saddle-shaped grooves that comprise likely macromolecule binding sites. Two equivalent enzyme active sites flank each saddle, suggesting that there is a spatial connection between the catalytic and binding activities. Structural similarities between the DCoH fold and nucleic acid-binding proteins argue that the saddle motif has evolved to bind diverse ligands or that DCoH unexpectedly may bind nucleic acids.

Control of Active Sites in Flocculation: Concept of "Equivalent Active Sites"

Flocculation and dispersion of solids are strong functions of the amount and conformation of the adsorbed polymer. Regions of dispersion and flocculation of solids with particular polymer molecules may be deduced from saturation adsorption data. The concept of "equivalent active sites" is proposed to explain flocculation and dispersion behavior irrespective of the amount or conformation of the adsorbed polymer. The concept has been further extended to study the selective flocculation process.