Environmental Remediation Applications Research Articles

Enhancement of the photocatalytic efficiency of ZnO utilizing luminescent Y2O3 particles

Abstract This study explored the superior photocatalytic performance of the nanoscale zinc oxide-yttrium oxide (ZnO - Y2O3) based composite over ZnO nanoparticles (NPs). We investigated this by following the photocatalytic degradation efficiency of methylene blue (MB). The sol-gel synthesized Y2O3 and ZnO NPs were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The spectral behaviour and photocatalytic efficiency of the proposed composite were investigated by UV-Vis spectrophotometry, steady-state and time-resolved photoluminescence (PL) measurements, respectively. The results indicated the successful formation of Y2O3 and ZnO nanoparticles with desirable structural properties. The photocatalytic degradation efficiency of the MB solution was evaluated for different concentrations of the counterparts of the ZnO - Y2O3 composite. In particular, the ZnO-5Y2O3-based composite showed superior photocatalytic activity after 150 min of UV irradiation, achieving 98.4% degradation of the MB solution compared to the 77% degradation achieved by pure ZnO. Although Y2O3 alone does not exhibit photocatalytic activity, its combination with ZnO significantly enhances the photocatalytic performance of ZnO. This improvement was attributed to the luminescence properties of Y2O3. By elucidating this unique mechanism, the performance of photocatalytic materials can be significantly enhanced. In our study, the improvement of the photodegradation rate constant (kapp) of ZnO from 0.009 min-1 to 0.0242 min-1 demonstrated the promising photocatalytic efficiency of the ZnO-5Y2O3 based composite, opening up exciting possibilities for further applications in environmental remediation and other fields.

Design of 3D printing superhydrophilic pyramid-shaped porous materials for oil-in-water emulsion separation and visualization of separation mechanism

This study focuses on the design and fabrication of a superhydrophilic pyramid-shaped porous material using high-precision 3D printing technology for effective oil-in-water emulsion separation. The unique pyramid-shaped structure enhances droplet interception, significantly improving separation efficiency. The material’s surface was modified with a self-polymerized dopamine (DA) and polyethyleneimine (PEI) coating, resulting in superhydrophilic and underwater superoleophobicity. This porous material achieved a separation flux of 3098 L/m2h with a separation purity of 99.3 %. Computational Fluid Dynamics (CFD) simulations were employed to visualize the emulsion separation mechanism, providing insights into the dynamic process of droplet behavior within the funnel structure. The material also demonstrated excellent corrosion resistance, maintaining its performance after prolonged exposure to acidic, alkaline, and saline environments. These results suggest that the developed material offers a promising solution for high-efficiency oil–water separation with potential applications in environmental remediation and industrial wastewater treatment.

Ultra-Slippery Hydrophilic Surfaces by Hybrid Monolayers.

Slippery solid surfaces with low droplet contact angle hysteresis (CAH) are crucial for applications in thermal management, energy harvesting, and environmental remediation. Traditionally, reducing CAH has been achieved by enhancing surface homogeneity. This work challenges this conventional approach by developing slippery yet hydrophilic surfaces through hybrid monolayers composed of hydrophilic polyethylene glycol (PEG)-silane and hydrophobic alkyl-silane molecules. These hybrid surfaces exhibited exceptionally low CAH (<2°), outperforming well-established homogeneous slippery surfaces. Molecular structural analyses suggested that the remarkable slipperiness is due to a unique spatially staggered molecular configuration, where longer PEG chains shield shorter alkyl chains, thus creating additional free volume while ensuring surface coverage. This was supported by the observation of decreased CAH with increasing temperature, highlighting the role of grafted chain mobility in enhancing slipperiness by self-smoothing and fluid-like behaviors. Furthermore, condensation experiments demonstrated the exceptional performance of the hydrophilic slippery surfaces in dew harvesting due to superior condensation nucleation, droplet coalescence, and self-sweeping efficiency. These findings offer a novel paradigm for designing advanced slippery surfaces and provide valuable insights into the molecular mechanisms governing dynamic wetting.

Enhanced degradation of polyethylene terephthalate (PET) microplastics by an engineered Stenotrophomonas pavanii in the presence of biofilm

Polyethylene terephthalate (PET) microplastics pose significant environmental and human health risks due to their resistance to degradation and accumulation in ecosystems. In this study, we engineered Stenotrophomonas pavanii JWG-G1, a robust biofilm-forming bacterium, to overexpress the PET hydrolase (DuraPETase) for PET microplastics degradation at ambient temperature. Nine endogenous PET hydrolases were identified through genome sequencing of S. pavanii, and were successfully expressed in Escherichia coli BL21(DE3). Among them, hydrolase Est_B achieved 100% degradation of bis(2-hydroxyethyl) terephthalate (BHET) at an initial concentration of 0.23 mg/mL at 30 °C within 4 h, identifying it as a novel BHETase. However, the PET degradation performance of all endogenous PET hydrolases was inferior to that of DuraPETase. The engineered strain overexpressing DuraPETase demonstrated a significant enhancement in PET degradation, achieving a 38.04 μM total product release of high-crystallinity PET microplastics after 30 days at 30 °C. The degradation extent was greater than that of low biofilm-forming engineered strains, attributing to the aggregation of DuraPETase on the PET surface in the presence of biofilm. Additionally, this engineered strain also maintained PET degradation activity across various water environments and demonstrated effectiveness in degrading other polyester plastics. This is the first report demonstrating that an engineered strain of Stenotrophomonas species is capable of simultaneously secreting exogenous hydrolase and degrading polyester microplastics, representing a novel approach in the development of engineered bacteria with potential applications in bioreactor systems and environmental remediation.

Nanostructured spinel ferrites: A comprehensive study on the synthesis, characterization, and magnetic properties of Zn and Mn substituted magnetite nanoparticles produced through the co-precipitation method

Seven cubic spinel ferrite nanoparticles were successfully synthesized through the co-precipitation method. These nanoparticles include Fe3O4, Zn0.4Fe0.62+Fe23+O4, Mn0.4Fe0.62+Fe23+O4, Zn0.6Mn0.4Fe0.42+Fe1.63+O4, Zn0.4Mn0.6Fe0.42+Fe1.63+O4, Zn0.4Mn0.4Fe0.22+Fe23+O4, and Zn0.4Mn0.4Fe0.42+Fe1.83+O4. The Rietveld method was used to analyze X-ray diffraction data, confirming that all samples have a single-phase cubic spinel structure. The presence of zinc and manganese ions in magnetite lattice leads to changes in lattice parameters and crystallite size, resulting in a range of 7–12 nm crystallite sizes. Fourier transform infrared spectroscopy (FT-IR) analysis of nanoparticles reveals two significant adsorption peaks at 560-576 cm−1 and 437-449 cm−1, corresponding to metal ion stretching vibrations at tetrahedral and octahedral sites. The X-ray photoelectron spectroscopy (XPS) analysis revealed the presence of iron, zinc, and manganese in various oxidation states. Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) images showed spherical, agglomerated nanoparticles. The study confirmed the elemental composition and mapping images of prepared samples using energy-dispersive X-ray spectroscopy (EDS). The magnetic properties of the synthesized nanoparticles were meticulously examined utilizing a vibrating sample magnetometer (VSM) at room temperature. A direct correlation is established between the structural alterations induced by Zn2+/Mn2+ and their subsequent effects on magnetic characteristics, specifically through the reallocation of cations and the mechanisms of electron hopping occurring at the B-sites. The structural modifications result in enhanced superparamagnetic behavior, exhibiting saturation magnetization values between 46.01 and 69.38 emu/g. The sustainable characteristics of these materials render them highly viable options for applications in environmental remediation and green technology.

A molecular view of peptoid-induced acceleration of calcite growth

The extensive deposits of calcium carbonate (CaCO 3 ) generated by marine organisms constitute the largest and oldest carbon dioxide (CO 2 ) reservoir. These organisms utilize macromolecules like peptides and proteins to facilitate the nucleation and growth of carbonate minerals, serving as an effective method for CO 2 sequestration. However, the precise mechanisms behind this process remain elusive. In this study, we report the use of sequence-defined peptoids, a class of peptidomimetics, to achieve the accelerated calcite step growth kinetics with the molecular level mechanistic understanding. By designing peptoids with hydrophilic and hydrophobic blocks, we systematically investigated the acceleration in step growth rate of calcite crystals using in situ atomic force microscopy (AFM), varying peptoid sequences and concentrations, CaCO 3 supersaturations, and the ratio of Ca 2+ / HCO 3 − . Mechanistic studies using NMR, three-dimensional fast force mapping (3D FFM), and isothermal titration calorimetry (ITC) were conducted to reveal the interactions of peptoids with Ca 2+ and HCO 3 − ions in solution, as well as the effect of peptoids on solvation and energetics of calcite crystal surface. Our results indicate the multiple roles of peptoid in facilitating HCO 3 − deprotonation, Ca 2+ desolvation, and the disruption of interfacial hydration layers of the calcite surface, which collectively contribute to a peptoid-induced acceleration of calcite growth. These findings provide guidelines for future design of sequence-specific biomimetic polymers as crystallization promoters, offering potential applications in environmental remediation (such as CO 2 sequestration), biomedical engineering, and energy storage where fast crystallization is preferred.

Two-Dimensional MXene Flakes with Large Second Harmonic Generation and Unique Surface Responses.

MXenes are a family of two-dimensional (2D) materials with broad and varied applications in biology, materials science, photonics, and environmental remediation owing to their layered structure and high surface area-to-volume ratio. MXenes have exhibited significant nonlinear optical characteristics, which have been primarily explored in the context of photonics applications, yet the second-harmonic generation (SHG) behavior of MXenes remains an unexplored aspect of their optical properties. Herein, we demonstrate and quantify large second-order responses of 2D Ti3C2Tx MXenes both in aqueous solutions and on a silicon substrate for the first time. MXene flakes showed strong second-harmonic scattering (SHS) in a dilute suspension with a sensitivity of less than 0.1 μg/mL. Angle-dependent SHS experiments further found that the second-order responses originate from coherent 2D dipole radiation. Through confocal and atomic force microscopies, we found that the intense SHG signal from free-standing MXene flakes increases exponentially with decreasing thickness, while two-photon fluorescence increases linearly with thickness. The second-order susceptibility of the MXenes was determined to be 3.6 pm V-1 with a thickness of 10 nm, almost twice of that for an often-used SHG crystal, beta barium borate. We further explored surface properties of the MXene sheets by investigating the SHS responses upon addition of organic dye molecules to the system. It was found that the adsorption of crystal violet (CV) obeys a Langmuir adsorption model while the addition of malachite green (MG) resulted in almost no change in SHG intensity, even though the adsorption capacities for both CV (61.3 ± 1.7 mg/g) and MG (54.8 ± 2.8 mg/g) are similar. Such a stark difference in adsorption characteristics between cationic organic CV and MG dyes is likely due to their distinct orientational orderings on the MXene surfaces. This work opens many possibilities for the further employment of the family of 2D materials in photonics, optics, and surface catalysis applications.

Optimisation, Synthesis, and Characterisation of ZnO Nanoparticles Using Leonotis ocymifolia (L. ocymifolia) Leaf Extracts for Antibacterial and Photodegradation Applications

This work presents a green synthesis route, which utilises extracts from an indigenous plant in South Africa, eastern and southern Africa that is understudied and underutilised, for preparing zinc oxide nanoparticles (ZnO NPs). This study involved optimisation of the green synthesis method using Leonotis ocymifolia (L.O.) extracts and performing comparative studies on the effects of using different zinc (Zn) salt precursors; zinc sulphate heptahydrate (Z001) and zinc acetate dihydrate (Z002) to synthesise the ZnO NPs. The comparative studies also compared the L.O-mediated ZnO NPs and chemical-mediated ZnO NPs (Z003). The as-prepared ZnO NPs were tested for their effectiveness in the photodegradation of methylene blue (MB) dye. Furthermore, antibacterial studies were conducted using the agar well diffusion method on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria. The structural, morphological, and optical characteristics of the synthesised ZnO NPs were analysed using XRD, FTIR, SEM, EDS, DRS, and BET techniques. The XRD results indicated that the L.O-mediated ZnO NPs had smaller crystallite sizes (18.24–19.32 nm) than their chemically synthesised counterparts (21.50 nm). FTIR confirmed the presence of biomolecules on the surface of the L.O-mediated NPs, and DRS analysis revealed bandgap energies between 3.07 and 3.18 eV. The EDS results confirmed the chemical composition of the synthesised ZnO NPs, which were made up of Zn and O atoms. Photocatalytic studies demonstrated that the L.O-mediated ZnO NPs (Z001) exhibited a superior degradation efficiency of the MB dye (89.81%) compared to chemically synthesised ZnO NPs (56.13%) under ultraviolet (UV) light for 240 min. Antibacterial tests showed that L.O-mediated ZnO NPs were more effective against S. aureus than E. coli. The enhanced photocatalytic and antibacterial properties of L.O-mediated ZnO NPs highlight their potential for environmental remediation and antimicrobial applications, thus supporting sustainable development goals.

Modified Titanium Dioxide Nanoparticles for Photocatalytic Splitting of Water and Its Application in Environmental Remediation as a Potential Alternative

Herein we reviewed Titanium dioxide (TiO2) nanoparticles and how they are applied in the photocatalytic splitting of water to generate hydrogen but also to remove both organic and inorganic pollutants. Hydrogen generation through the splitting of water by TiO2 which is a cheap, efficient, and non-toxic photocatalyst has found wide application in clean energy production. The efficiency of the photocatalyst can be improved by using water or sacrificial agents as electron donors, thereby enhancing hydrogen production. In addition, this review explores the fundamental principles, mechanisms, and applications of TiO2-based photocatalysis. It further, highlights the structural properties, bandgap engineering, and surface modifications that influence the catalytic activity of TiO2. Additionally, we discuss the doping of TiO2 with both metals and non-metals to narrow the energy band gap which lowers the recombination effects. Finally, it introduces the potential applications of TiO2-based photocatalysis in the photodegradation of organic and inorganic pollutants.

Hierarchical TiO2 nanostructures sensitized with MoS2 nanosheets: an efficient and reusable heterojunction photocatalyst for sunlight-assisted degradation of organic dye pollutants

Abstract The present study reports the synthesis, characterization, and natural sunlight-driven photocatalytic activity of a novel heterojunction photocatalyst comprised of hierarchical rutile titanium dioxide (r-TiO2) nanostructures and 1T/2H molybdenum disulfide (MoS2)nanosheets. These components were synthesized by solvothermal methods and their effective integration was achieved by using 3- aminopropyltrimethoxysilane as coupling agent. The photocatalytic activity of r-TiO2/MoS2 nanohybrid was explored for the degradation of cationic dye methylene blue (MB), and anionic dye congo red (CR) under natural sunlight. The results reveal that the sunlight-driven photocatalytic activity of pristine r-TiO2 was drastically enhanced upon sensitization with 1T/2H MoS2 nanosheets. The nanohybrid could degrade 99% MB and 98% CR within 150 min with rate constants 25.6×10−3 and 13.2×10−3 min−1respectively. The r-TiO2/MoS2 nanohybrid retained more than 85% of its catalytic activity even after four cycles of reuse. The scavenger test revealed that holes and hydroxyl radicals are mainly responsible for the degradation of MB and CR. The facile synthesis, outstanding catalytic activity under natural sunlight, and excellent recyclability make r-TiO2/MoS2 a promising heterojunction photocatalyst for the degradation of environmental pollutants from wastewater. The present study can provide new insights towards the development of efficient, economical and sustainable photocatalysts for harnessing renewable solar energy for environmental remediation applications.&amp;#xD;

Recent Advances of Plastic Waste‐Derived Carbon Materials for Energy Storage, Environmental Remediation and Organic Synthesis Applications

AbstractThe escalating severity of plastic waste's impact on the ecological environment and human health emphasize the crucial importance of developing resource‐conserving disposal technologies for sustainable development. Carbon‐based materials possess extensive functional applications across various fields, however, their high production costs and heavy reliance on fossil fuels pose challenges. Plastic wastes serve as ideal precursors for the green and sustainable production of carbon‐based functional materials due to high carbon content and low‐cost. This review provides a comprehensive summary of recent research progress on plastic waste‐derived carbon materials (PWCMs) including primary strategies for constructing PWCMs and their current functional applications in energy storage, environmental remediation and organic synthesis.

Synthesis Techniques and Biomedical Applications of Cyclodextrin Metal-Organic Frameworks.

Cyclodextrin Metal-Organic Frameworks (CD MOFs) represent an innovative class of materials with remarkable properties and a broad range of applications. This review provides a comprehensive overview of the synthesis techniques, structural characterization, and diverse applications of CD-MOFs. By combining cyclodextrins (CDs) with metal-organic frameworks (MOFs), CD-MOFs are developed with enhanced functionality. The synthesis methods, including various metal sources, coordination modes, and post-synthesis modifications, are discussed alongside advanced structural characterization techniques like X-ray crystallography and spectroscopic methods. The unique characteristics of CD-MOFs, such as high specific surface area, tunable porosity, and customizable chemical structure, make them exceptional candidates for applications in gas adsorption, drug delivery, catalysis, sensing, and environmental remediation. Notably, CD-MOFs show significant promise as nanocarriers in drug delivery systems, offering improved therapeutic outcomes due to their efficient encapsulation and controlled release capabilities. The review highlights recent advancements and underscores the potential impact of CD-MOFs in driving future innovations across various scientific fields.

From Corn Starch to Nanostructured Magnetic Laser-Induced Graphene Nanocomposite.

Laser-Induced Graphene (LIG) is a 3D, conductive, porous material with a high surface area, produced by laser irradiation of synthetic polymers with high thermal stability. Recently, the focus has shifted toward sustainable bioderived and biodegradable precursors, such as lignocellulosic materials. Despite starch being an abundant and cost-effective biopolymer, direct laser scribing on starch-derived precursors has not yet been explored. This study demonstrates that corn starch bioplastic (SP) can be converted into LIG through iron-catalyzed laser-induced pyrolysis, using Fe(NO₃)₃ as an additive. The impact of iron additive concentration on LIG formation and on its properties is investigated, with only certain concentrations yielding reliable and reproducible results. The investigation of LIG's crystal structure reveals magnetic and non-magnetic iron phases: γ-Fe₂O₃, Fe₃C, and Fe(C). The LIG nanocomposite exhibits soft magnetic properties, with a coercive field of Hc ≈ 200Oe and a saturation magnetization of Ms ≈ 67 emu g⁻¹. The SP substrate degrades almost entirely in soil within 12 days and is unaffected by the addition of Fe(NO₃)₃, allowing for material compostability in line with circular economy principles. Consequently, SP stands out as a promising "green" precursor for magnetic LIG, paving the way for sustainable applications in environmental remediation.

Tailoring of Time for Hydrothermal Synthesis of 2D MoSe2 with Enhanced Adsorption and Electro‐Catalytic Efficiency for Applications in Self‐Cleaning and Hydrogen Energy Generation

AbstractMolybdenum diselenide (MoSe2), a 2D layered transition metal dichalcogenide, has garnered significant scientific research interest for its catalytic and electrocatalytic activities. Here, a straightforward hydrothermal procedure is used to synthesize MoSe2 nanosheets (NSs) and focus on their adsorption capabilities and hydrogen evolution reaction (HER) activity. The MoSe2 NSs which are synthesized by 12 h of hydrothermal treatment found to exhibit the highest adsorption capacity of 91.67 mg g−1. The kinetics of the adsorption process have been found to follow the pseudo‐second‐order model, signifying chemisorption and multilayer adsorption as described by the Freundlich isotherm. The thermodynamic analysis further suggests that the adsorption proceeds by endothermic and spontaneous mechanisms. The self‐cleaning property of the adsorbent is demonstrated by degrading the dye on the adsorbent‐coated cotton fabric. The sample created using a 12 h hydrothermal method has been shown to have a minimal Tafel slope of 58 mV dec−1. It also shows excellent HER activity at low over‐potential and possesses long‐term durability. The dual functionality of MoSe2 NSs in both adsorption and electrocatalytic activity highlights their potential for application in environmental remediation and renewable energy production.

Structural, optical, photocatalytic and thermal behaviour of (Nb, Ta) co-doped WO3 nanoparticles and its application in photocatalytic degradation of MG and RhB dyes

In this communication, eco-friendly, cost effective and facile hydrothermal route was adopted to synthesize pure WO3, Nb-doped WO3 and (Nb, Ta) co-doped WO3 nanoparticles. Phase, lattice constants, crystallite size and crystallinity have been evaluated through X-ray diffraction. The insertion of Nb and Ta ions into WO3 nanoparticles was confirmed by XPS, FTIR and EDS studies. HRTEM and SAED micrographs exhibited highly nanocrystalline nature of samples. UV–visible studies was carried out to analyse nature of band gap, band gap energy, extinction coefficient, refractive index, Urbach energy and optical conductivity of prepared samples. Optical band gap was narrowed from 2.94 to 2.49 eV and Urbach energy was extended from 0.08 to 0.35 eV through co-doping of (Nb, Ta) ions into WO3 NPs. Reduction in PL intensity revealed that electron-hole pair recombination rate was decreased with co-doping of (Nb, Ta) ions. The photo-degradation efficiency of (Nb 5 %, Ta 5 %) co-doped WO3 nanophotocatalysts was 93.12 % against MG and 90.11 % against RhB dyes. The rate constant was found to be increased from 0.0107 to 0.0203 min−1 for MG and 0.0086 to 0.0174 min−1 for RhB. Thermal results exhibited the weight loss in three phase degradation processes, and thermal stability. The results showed that (Nb 5 %, Ta 5 %) co-doped WO3 NPs is a potential candidate for practical applications in environmental remediation (organic dyes degradation).

Characterization, biological activity and photodegradation efficacy of synthesized tryptophan capped silver nanoparticles

Tryptophan capped Silver nanoparticles (AgNPs) were synthesized through a sonochemical method, utilizing tryptophan as a biocompatible and non-toxic capping agent. Based on UV–visible spectra, the optical band gap of the nanoparticles was found to be roughly 3.01 eV. The TEM and XRD measurements of the particle sizes showed a range of 10–22 nm. Under sun irradiation, these nanoparticles showed notable photocatalytic activity, destroying Methylene Blue (MB) dye by more than 79.4 %. With a pseudo-first-order apparent rate constant of 1.5×10−2min-1, the degradation kinetics were observed. The photocatalysis of MB dye was investigated using liquid chromatography in conjunction with electrospray ionization time-of-flight mass spectrometry (LC-ESI-TOF-MS) to determine the products generated and to clarify the degradation processes. Additionally, the antibacterial, anticancer potential showed thate the nanoparticles exhibited good antibacterial and notable anticancer properties. Furthermore, the antidiabetic activity was investigated through α-glucosidase inhibition, demonstrating a significant inhibition rate of 53.98 %. Antioxidant capabilities were also tested using ABTS and DPPH assays, revealing antioxidant activities of 73.9 % and 52.04 %, respectively. Overall, the synthesized tryptophan-capped AgNPs show promising applications in environmental remediation, as well as potential therapeutic uses.

Mesoporous Fe3O4@SiO2@La nanocomposite for efficient methylene blue removal from wastewater

This study investigates the synthesis and application of Fe3O4@SiO2@La mesoporous nanocomposites for methylene blue (MB) removal from wastewater. The successful synthesis of the nanocomposite was confirmed by various characterization techniques including FE-SEM, XRD, BET/BJH, and FT-IR. The adsorption efficiency of the nanocomposite for MB removal was evaluated under different operating conditions, including initial solution pH, adsorbent dosage, contact time, and temperature. The results revealed that the nanocomposite demonstrated optimal performance at neutral pH (pH=7), with an adsorbent dosage of 0.01 g, a contact time of 5 min, and 25 °C. Kinetic studies revealed pseudo-second-order kinetics, indicating chemisorption as the rate-limiting step. Langmuir and Freundlich isotherms were applied to describe the adsorption process. The nanocomposites demonstrated excellent reusability and high removal efficiency in real wastewater samples. The enhanced MB removal efficiency of the Fe₃O₄@SiO₂@La nanocomposites is attributed to electrostatic interactions, π-π stacking, and hydrogen bonding between MB and the adsorbent surface. Overall, the synthesized nanocomposites offer a promising and efficient solution for MB removal from wastewater, demonstrating potential for practical applications in environmental remediation.

Bi2O2.33/Bi4O5I2-heterojunction photocatalysts for adsorption and visible light-driven degradation of pharmaceutical pollutants

This study introduces the innovative Bi4O5I2/Bi2O2.33 heterojunction for diclofenac (DF) degradation. Pharmaceutical pollutants, especially DF, pose significant threats to water sources, necessitating efficient treatment methods. Bi2O2.33, renowned for its unique ferromagnetic properties, emerges as a promising photocatalyst for pollutant degradation. Bi4O5I2, known for strong visible light absorption and stability, holds potential for environmental applications. Interestingly, the inclusion of titanium dioxide (TiO2) in the composite catalysts significantly influences their observed ferromagnetic properties, as revealed by Electron Paramagnetic Resonance (EPR) spectroscopy, by influencing the interactions within the Bi4O5I2/Bi2O2.33 heterojunction and influencing its structure, morphology, and spin behavior. This interaction results in enhanced EPR and Ferromagnetic Resonance (FMR) signals, indicating intriguing spin interactions, polarization effects, charge transfers, surface dynamics, and stabilized magnetic domains. While the enhanced ferromagnetism holds promise for efficient charge separation and potential applications in environmental remediation, the expected boost in visible light-driven activity was not fully realized. This limitation is attributed to TiO2 inherent inability to directly absorb visible light, hindering its utilization for enhanced photocatalysis within the heterojunction. Nevertheless, these findings elucidate the multifaceted role of TiO2 in modulating the magnetic properties of these catalysts, offering valuable insights for future advancements in the design of advanced photocatalysts for effective environmental remediation.

TiO2 Surface Hybridisation with Ag and CuO for Solar‐Assisted Environmental Remediation and Sustainable Energy Applications

Industrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble‐metal and/or noble‐metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar‐light irradiation. Our results showed that titania modified with an Ag:Cu molar ratio equal to 1:1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light‐induced generation of hydrogen from water splitting.

Influence of non-metals doping on the structural, electronic, optical, and photocatalytic properties of rutile TiO2 based on density functional theory computations

This study investigates the influence of non-metal doping (C, F, N, and S) on the structural, electronic, and optical properties of rutile TiO2 using Hubbard-corrected density functional theory (DFT) within the Quantum ESPRESSO code. Rutile TiO2 is a promising material for environmental remediation and renewable energy applications. However, it has a large bandgap of 3.03 eV, which confines its use to UV light. By substituting oxygen atoms with a single dopant atom, we aim to shift the absorption edge toward the visible spectrum. Our findings reveal that doping with C, N, and S results in a redshift of the bandgap, while F doping does not exhibit this effect. The imaginary part of the dielectric function indicates shifted absorption edges for C, N, and S-doped TiO2, making them suitable for photocatalytic applications. Additionally, an increased refractive index after doping suggests the presence of excess charge carriers that affect light propagation. This work provides valuable insights for experimentalists exploring non-metal doping influences on rutile TiO2 for photocatalysis.