Environmental Protection Agency Criteria Research Articles

Elemental Impurity Analysis in Five Different Types of Coffee: Assessment of Carcinogenic and Non-carcinogenic Risks

In the study, the levels of Cd, Pb, As, and Hg elemental impurities potentially present in coffee bean samples from Indonesia, Kenya, Colombia, Guatemala, and Türkiye were determined using chromatographic analysis, and the analysis results were utilized to assess the risks on human health. The risk assessment of coffee was calculated for one or three servings per day for 365 days a year. Exposure to coffee consumption was calculated according to age groups of young adults and middle-aged adults (20-65 years). When Cd, Pb, As and Hg levels in coffee samples were analyzed, Cd in coffee samples was found to be in the range of approximately 3.70 - 5.89 µg/kg, Pb in the range of 25.68-41.11 µg/kg, As in the range of 1.45-6.64 µg/kg and Hg in the range of 1.06-5.06 µg/kg. Hazard Index (HI) values for all elements in the assessment of non-carcinogenic risks were found to be <1.0. When the cancer risk (CR) value was calculated for Cd, Pb, and As, it was found that the CR value did not exceed the United States Environmental Protection Agency (USEPA) criteria in all coffee samples in both scenarios. Considering the assessment of the health risks of elemental impurities in five different coffee bean samples, it was concluded that all samples' CR and HI values did not exceed the USEPA criteria.

Comparison of methods proposed for monitoring cefotaxime-resistant Escherichia coli in the water environment.

Escherichia coli is a promising subject for globally coordinated surveillance of antimicrobial resistance (AMR) in water environments due to its clinical relevance and widespread use as an indicator of fecal contamination. Cefotaxime-resistant E. coli was recently evaluated favorably for this purpose by the World Health Organization TriCycle Protocol, which specifies tryptone bile x-glucuronide (TBX) medium and incubation at 35°C. We assessed comparability with the U.S. Environmental Protection Agency-approved method for E. coli quantification, which uses membrane-thermotolerant E. coli (mTEC) agar and incubation at 44.5°C, in terms of recovery of E. coli and cefotaxime-resistant E. coli from wastewater influent and surface waters. Total E. coli concentrations in wastewater influent were 106-108 CFU/100 mL, while cefotaxime-resistant E. coli were ~100-fold lower. Total E. coli in surface waters were ~102 CFU/100 mL, and cefotaxime-resistant isolates were near the limit of detection (0.4 CFU/100 mL). Total and putative cefotaxime-resistant E. coli concentrations did not differ significantly between media or by incubation method; however, colonies isolated on mTEC were more frequently confirmed to species (97.1%) compared to those from TBX (92.5%). Incubation in a water bath at 44.5°C significantly decreased non-specific background growth and improved confirmation frequency on both media (97.4%) compared to incubation at 35°C (92.3%). This study helps to advance globally coordinated AMR in water environments and suggests that the TriCycle Protocol is adaptable to other standard methods that may be required in different locales, while also offering a means to improve specificity by decreasing the frequency of false-positive identification of cefotaxime-resistant E. coli by modifying incubation conditions.IMPORTANCEAs antibiotic-resistant bacteria in water environments are increasingly recognized as contributors to the global antibiotic resistance crisis, the need for a monitoring subject that captures antibiotic resistance trends on a global scale increases. The World Health Organization TriCycle Protocol proposes the use of cefotaxime-resistant Escherichia coli isolated on tryptone bile x-glucuronide agar. The U.S. Environmental Protection Agency (USEPA) criteria for safe recreational waters also use E. coli as an indicator but specify the use of mTEC agar at a higher incubation temperature (44.5°C vs 35°C). We assessed the comparability of these methods for isolating total and cefotaxime-resistant E. coli, finding overall good agreement and performance, but significantly higher specificity toward E. coli selection with the use of the USEPA incubation protocol and mTEC agar. This study is the first to directly compare these methods and provides evidence that the methods may be used interchangeably for global surveillance of antibiotic resistance in the environment.

An In-Field Assessment of the P.ALP Device in Four Different Real Working Conditions: A Performance Evaluation in Particulate Matter Monitoring.

This study aimed to assess the performance, in terms of precision and accuracy, of a prototype (called "P.ALP"-Ph.D. Air Quality Low-cost Project) developed for monitoring PM2.5 concentration levels. Four prototypes were co-located with reference instrumentation in four different microenvironments simulating real-world and working conditions, namely (i) office, (ii) home, (iii) outdoor, and (iv) occupational environments. The devices were evaluated for a total of 20 monitoring days (approximately 168 h) under a wide range of PM2.5 concentrations. The performances of the prototypes (based on the light-scattering working principle) were tested through different statistical methods. After the data acquisition and data cleaning processes, a linear regression analysis was performed to assess the precision (by comparing all possible pairs of devices) and the accuracy (by comparing the prototypes against the reference instrumentation) of the P.ALP. Moreover, the United States Environmental Protection Agency (US EPA) criteria were applied to assess the possible usage of this instrumentation, and to evaluate the eventual error trends of the P.ALP in the data storage process, Bland-Altman plots were also adopted. The outcomes of this study underlined that the P.ALP performed differently depending on the microenvironment in which it was tested and, consequently, on the PM2.5 concentrations. The device can monitor PM2.5 variations with acceptable results, but the performance cannot be considered satisfactory at extremely low and remarkably high PM2.5 concentrations. Thanks to modular components and open-source software, the tested device has the potential to be customized and adapted to better fit specific study design needs, but it must be implemented with ad hoc calibration factors depending on the application before being used in field.

Particulate Pb emission factors from wildland fires in the United States

Wildland fires, which includes both wild and prescribed fires, and agricultural fires in sum are one of the largest sources of fine particulate matter (PM2.5) emissions to the atmosphere in the United States (US). Although wildland fire PM2.5 emissions are primarily composed of carbonaceous material, many other elements including trace metals are emitted at very low levels. Lead (Pb) is a US Environmental Protection Agency (EPA) criteria pollutant that is ubiquitous in the environment at very low concentrations including in biomass that can burn and emit Pb into the atmosphere. Although fires may emit Pb at very low concentrations, they can be a source of sizeable Pb emissions to the atmosphere because of the large quantity of PM2.5 emitted from fires. In this work, we measure Pb concentrations in unburned biomass, ash/residues, and particulate matter <2.5 μm (PM2.5) emitted from wildland fires using in-field measurements near prescribed fires and in laboratory simulations. Emission factors were calculated for multiple biomass types, representative of different regions of the US including grasslands in Oregon and Kansas; forest litter from Oregon, Montana, Minnesota, and North Carolina; and peat cores from Minnesota. Most of the biomass Pb remains in the ash/residues. The small percentage (<10%) that is emitted in PM2.5 is dependent on the biomass Pb concentration. The emissions factors measured here are several orders of magnitude lower than some reported in the literature, but the studies exhibited a wide range of values, which may be due to large uncertainties in the measurement method rather than differences in Pb emissions. Wildland fires are expected to increase in size and frequency in future years and these new emission factors can be used to improve the accuracy of Pb emissions estimates and better constrain our understanding of Pb emissions to the atmosphere.

Survey on the quality of outlet biosolids and sludge heavy metals in the wastewater treatment plants of Mazandaran province

Background: Sewage sludge is rich in fecal coliforms, Salmonella, parasite eggs, and heavy metals that can cause disease in humans. The aim of this study was to evaluate the quality of outlet biosolids and sludge heavy metals in the wastewater treatment plants (WWTP) in Mazandaran province and to compare them with the Environmental Protection Agency (EPA) standards. Methods: This study was carried out on the sludge of the treatment plants of Sari, Joybar, Babol, Babolsar, Nowshahr, and Nowshahr-Chalus sludge compost plants. In this study, physical, chemical, and biological properties of sludge samples including retention time, pH, total solids (TS), color, heavy metals (copper, zinc, nickel, cadmium, and chromium) as well as the density of fecal coliform, Salmonella and parasite eggs were determined and reported. Results: Biosolids of Joybar, Babol, Babolsar, and Nowshahr-Chalus WWTP in terms of parasite eggs were in class A. Biosolids of Sari WWTP in summer after drying off naturally were located in Class A, and in summer and spring, were located in Class B based on the US EPA criteria. The average concentration of heavy metals (copper, zinc, nickel, cadmium, and chromium) was lower than the EPA standard. Conclusion: The results showed that mostly the treated sewage sludge in Mazandaran WWTPs were in Class B of the EPA guideline. The concentration of heavy metals in the biosolids of these WWTPs is lower than the EPA regulation and the use of these biosolids in agriculture is not limited for these metals.

Ambient air pollution and clinical dementia: systematic review and meta-analysis

ObjectiveTo investigate the role of air pollutants in risk of dementia, considering differences by study factors that could influence findings.DesignSystematic review and meta-analysis.Data sourcesEMBASE, PubMed, Web of Science, Psycinfo, and...

Analysis of Pollution Characteristics and Emissions Reduction Measures in the Main Cotton Area of Xinjiang.

With cotton production in Xinjiang increasing annually, the impact on the environment of agricultural waste produced to improve production has been reflected. This study selected Bozhou of Xinjiang, the main cotton producing region in northern Xinjiang, as the research object, and collected hourly concentration data of six pollutants from 2017 to 2021, and analyzed the spatial and temporal distribution characteristics of each pollutant. At the same time, Morlet wavelet analysis was used to further analyze the variation period of PM2.5 (PM particles with aerodynamic diameters less than 2.5 μm) concentration. The Weather Research and Forecasting model coupled with the Community Multiscale Air Quality (WRF-CMAQ) model was used to evaluate the emissions reduction measures for the most polluted month. The results showed that the concentration of particulate matter (PM particles with aerodynamic diameters less than 2.5 μm and 10 μm) decreased from the southern mountains to the north; moreover, the concentrations of CO (carbon monoxide), NO2 (nitrogen dioxide), and SO2 (sulfur dioxide) in the suburbs were higher than those in the urban center. The concentration of O3 (Ozone) was the highest in summer, while the concentrations of other pollutants were high in autumn and winter. Under the time scale of a = 13, 24, PM2.5 had significant periodic fluctuation. The health risk values of PM2.5 and PM10 in this study were within the scope of the United States Environmental Protection Agency (USEPA) criteria, but it is still necessary to keep a close watch on them. In the context of emissions reduction measures, agricultural sources reduced by 20%, residential sources by 40%, industrial sources by 20%, and transportation sources by 20%; no change in the power source remains. Under these conditions, the daily average value of each pollutant met the first level of the national ambient air quality standard. The research results provide a reference for the local government to formulate heavy pollution emissions reduction policies.

Characterization of ambient polychlorinated biphenyl background conditions in surface waters of the Pajarito Plateau, New Mexico.

This study presents the development of polychlorinated biphenyl (PCB) background threshold values (BTVs) that statistically characterize ambient background conditions for surface waters in undeveloped and developed landscapes of the Pajarito Plateau in the Rio Grande Basin of New Mexico. Between 2009 and 2018, surface water data were collected at 45 locations under a variety of flow conditions and regimes. A total of 163 samples were collected, with roughly 1/3 of samples and locations being in undeveloped areas (n = 53 from 17 locations), and the remainder being in developed areas (n = 110 from 28 locations). While there are areas on the Pajarito Plateau where PCB point sources are known or likely to have contributed to PCBs in soils, PCB BTVs calculated for undeveloped portions of watersheds (upstream of areas where PCB point sources are known or likely to have contributed to PCBs in soils, and therefore not affected by PCB sources within the watershed) are well above New Mexico's human health organism-only (HH-OO) water quality criterion (0.64 ng/L). Background threshold values are even higher in developed areas upstream of managed soil sites, suggesting that in developed areas, both diffuse ambient PCB sources (e.g., atmospheric deposition) and localized urban sources (e.g., building materials, paints, and electrical equipment) contribute to PCBs in those watersheds. These findings indicate that New Mexico's current HH-OO water quality criterion for PCBs cannot practicably be met due to ambient conditions. It is also impracticable to meet the US Environmental Protection Agency (EPA) criterion continuous concentration (CCC) of 14 ng/L in developed background areas, where the BTV is approximately 1.5 times the CCC. Integr Environ Assess Manag 2023;19:1307-1319. © 2022 SETAC.

Adverse Effects of Black Carbon (BC) Exposure during Pregnancy on Maternal and Fetal Health: A Contemporary Review.

Black carbon (BC) is a major component of ambient particulate matter (PM), one of the six Environmental Protection Agency (EPA) Criteria air pollutants. The majority of research on the adverse effects of BC exposure so far has been focused on respiratory and cardiovascular systems in children. Few studies have also explored whether prenatal BC exposure affects the fetus, the placenta and/or the course of pregnancy itself. Thus, this contemporary review seeks to elucidate state-of-the-art research on this understudied topic. Epidemiological studies have shown a correlation between BC and a variety of adverse effects on fetal health, including low birth weight for gestational age and increased risk of preterm birth, as well as cardiometabolic and respiratory system complications following maternal exposure during pregnancy. There is epidemiological evidence suggesting that BC exposure increases the risk of gestational diabetes mellitus, as well as other maternal health issues, such as pregnancy loss, all of which need to be more thoroughly investigated. Adverse placental effects from BC exposure include inflammatory responses, interference with placental iodine uptake, and expression of DNA repair and tumor suppressor genes. Taking into account the differences in BC exposure around the world, as well as interracial disparities and the need to better understand the underlying mechanisms of the health effects associated with prenatal exposure, toxicological research examining the effects of early life exposure to BC is needed.

Water vulnerability to pesticide contamination in a Brazilian semiarid watershed.

This study aimed to prepare an inventory of the main active ingredients of pesticides and estimate the risk of pollution of groundwater and surface water resources in a Brazilian semiarid basin. The inventory was prepared using data from government agency databases. The contamination risk estimate was obtained using the GOSS index, Groundwater Ubiquity Score (GUS), Groundwater Screening Index (GSI), Leachability Index (LIX), US Environmental Protection Agency (USEPA) criteria, Leaching Index (LEACH), and Relative Leaching Potential Index (RLPI). The inventory identified 57 active ingredients commercialized under a well-defined chemical class. Most of these (51.5%) belong to the very dangerous class, while 43.6% belong to the moderately toxic class. The GOSS model showed that 23.7% of the active ingredients have a low potential, 50.85% have a moderate potential, and 13.56% have a high potential for surface water contamination, with its transport being associated with the sediment. The GUS index indicates a low potential for groundwater contamination. However, the GSI points to a high potential for water contamination, the USEPA criteria for a possible contamination of groundwater, and, according to the LIX, most of the pollutants do so by leaching. The information provided contributes to the management of xenobiotic compounds in arid and semiarid basins, adding to the water security effort by providing tools for the assessment of potential pesticide pollution. Integr Environ Assess Manag 2023;19:804-816. © 2022 SETAC.

Health Risk Assessment of Heavy Metals: Cu, Cd, Pb, Ni and Hg, in Catfish Ariopsis felis in Southern Mexico

Background: Metal pollution is a problem in many parts of the world. These metals can be harmful when they exceed the recommended limits. By analyzing metal concentrations in living organisms, it is possible to deduce the bioavailability and the level of environmental contamination for specific metals in an ecosystem. The aim of this study was to determine the heavy metals copper, cadmium, lead, nickel and mercury in edible tissues of fish, to establish the risk analysis for human health. There are currently no studies in this area indicating these factors. Methods: The edible tissue samples were treated under the techniques of the official mexican standards (NOM-117-SSA1) and analyzed using atomic absorption spectroscopy (flame and graphite). The heavy metal concentrations were used to calculate the estimated daily intakes, target hazard quotients, hazard indices, and target cancer risks for children and adults. Results: The highest concentrations of copper (138.82 μg/g), cadmium (1.28 μg/g) and lead (3.20 μg/g) in the edible tissue samples exceeded the permissible limits considered in this study while nickel and mercury levels did not. The target hazard quotient indices for copper, cadmium and nickel in specific sites were higher than the United States Environmental Protection Agency (US-EPA) criteria (&gt;1), while the values ​​for mercury and lead were below one. The hazard indices were higher than the US-EPA criteria (&gt;1) in more than 50% of the sites analyzed. Conclusion: This study is an alert, indicating that inhabitants who consume the fish, particularly children, are at risk of cadmium, lead and nickel toxicity.

Could the exception become the rule? ‘Uncontrollable’ air pollution events in the US due to wildland fires

Exceptional events occur when air pollution in a specific location exceeds the National Ambient Air Quality Standards (NAAQS) due to an event that cannot be reasonably attributed to human activities, such as a wildland fire. Ground-level ozone (O3) and particulate matter (PM) are Environmental Protection Agency (EPA) criteria pollutants regulated under the NAAQS. Smoke from wildland fires can increase PM and O3 concentrations downwind of fire and impact air quality, visibility, and health. Our analysis shows that the frequency of exceptional event reporting for PM with aerodynamic diameters smaller than 2.5 μm or 10 μm (PM2.5 and PM10) had increased since 2007 when the air quality standards became more stringent. We also show that wildland fires and windblown dust drive many exceptional events in several EPA regions. We note the importance of growth in the number of exceptional event days due to wildfire smoke in the future due to climate change and point to possible changes to the NAAQS and implementations.

Wildland fire emission factors in North America: synthesis of existing data, measurement needs and management applications

Field and laboratory emission factors (EFs) of wildland fire emissions for 276 known air pollutants sampled across Canada and the US were compiled. An online database, the Smoke Emissions Repository Application (SERA), was created to enable analysis and summaries of existing EFs to be used in smoke management and emissions inventories. We evaluated how EFs of select pollutants (CO, CO2, CH4, NOx, total particulate matter (PM), PM2.5 and SO2) are influenced by combustion phase, burn type and fuel type. Of the 12533 records in the database, over a third (n=5637) are represented by 23 air pollutants, most designated as US Environmental Protection Agency criteria air pollutants, greenhouse gases, hazardous air pollutants or known air toxins. Among all pollutants in the database, including the most common pollutants PM, CO, CO2 and CH4, records are unevenly distributed with a bias towards flaming combustion, prescribed burning and laboratory measurements. Across all EFs, records are most common for south-eastern and western conifer forests and western shrubland types. Based on identified data gaps, we offer recommendations for future studies, including targeting underrepresented air pollutants, smouldering combustion phases and improved source characterisation of wildland fire emissions.

Distribution of Experimentally Added Selenium in a Boreal Lake Ecosystem.

Human activities have increased the release of selenium (Se) to aquatic environments, but information about the trophic transfer dynamics of Se in Canadian boreal lake systems is limited. In the present study, Se was added as selenite to limnocorrals (2-m-diameter, 3000-L in situ enclosures) in a boreal lake in northwestern Ontario to reach nominal concentrations of 1 and 10 µg Se/L in triplicate each for 77 d, and 3 additional limnocorrals were controls with no Se added. Total Se concentrations were determined in water, sediment, periphyton, benthic macroinvertebrates, zooplankton, and reproductively mature female fathead minnows (Pimephales promelas; added on day 33) collected throughout (and at the end of) the exposure period. Mean measured water Se concentrations in the control, 1-, and 10-µg/L treatments were 0.12, 1.0, and 8.9 µg/L. At the end of exposure (day 77), enrichment functions ranged from 7772 L/kg dry mass in the 8.9-µg/L treatment to 23495 L/kg dry mass in the 0.12-µg/L treatment, and trophic transfer factors for benthic macroinvertebrates ranged from 0.49 for Gammaridae to 2.3 for Chironomidae. Selenium accumulated in fathead minnow ovaries to concentrations near or above the current US Environmental Protection Agency criterion (15.1 µg/g dry mass for fish ovary/egg) in the 1.0- and 8.9-µg/L treatments, suggesting that, depending on aqueous Se speciation, such exposures have the potential to cause Se accumulation in fish to levels of concern in cold-water, boreal lake systems. Environ Toxicol Chem 2019;38:1954-1966. © 2019 SETAC.

Environmental and Agronomical Aspects of Sludge Produced from Tannin-Based Coagulants in Dairy Industry Wastewater Treatment

A study was carried out of the environmental and agronomic features of the sludge generated by a dissolved air flotation process applying a tannin-based coagulant in a dairy factory. First, the chemical and physical characteristics of the sludge were examined. Subsequently, a solubilization test was performed to evaluate the potential of groundwater contamination after the application of sludge on soil. The data obtained were compared to the United States Environmental Protection Agency (US-EPA) criteria for evaluation and classification of solid residues for land application. The results show that the studied sludge is a non-hazardous waste, and all evaluated parameters are lower than the maximum reference values according to international criteria. Based on the set of parameters which were evaluated, no organic pollutants were found. Additionally, the agronomic characterization shows good potential for agricultural purposes. However, in the solubilization test, chemicals such as phenols, cyanide, nitrate and fluoride were solubilized from the studied residue. As a result, the water showed concentrations above the limits required by the international criteria for drinking water established by US-EPA and World Health Organization. In conclusion, although tannin-based coagulants produce sludge with the potential for agronomic applications, some limits have to be considered to avoid environmental impacts.

Expansion assessment of the sugarcane and ethanol production in the Llanos Orientales region in Colombia

AbstractThe Cauca River Valley region has traditionally been the main sugarcane production area for the sugar and ethanol industries in Colombia. This area is not expected to expand its agricultural frontiers, mainly due to social, geographic, and water limitations.This study is part of the Bioenergy Contribution of Latin America, the Caribbean and Africa to the Global Sustainable Bioenergy Initiative (LACAf) project, which assessed potential regions for the expansion of ethanol production in Colombia and Mozambique. Studies linked to the LACAf project have identified the Llanos Orientales (eastern savannas) region as the most appropriate option for sugarcane expansion in Colombia, due to its favorable climate and a significant amount of arable land available for agriculture. The main goal of this study was to assess the economic benefits and environmental impacts of several simulated ethanol biorefineries in the Llanos Orientales region. The study was performed using the Virtual Sugarcane Biorefinery, which allows the evaluation of integrated new alternatives for sugarcane and ethanol production. The results of this research showed that all the first‐ and second‐generation biorefineries assessed were profitable and attractive. Furthermore, the results of the simulations for the Lanos Orientales region have shown great potential for reducing environmental impacts compared to the current production in the Cauca River Valley. Consequently, the ethanol produced could qualify as ‘advanced’ in terms of the US Environmental Protection Agency criteria, and it meets the requirements of the European Parliament, representing a business opportunity to enter into the largest ethanol markets, and increasing biofuel production in Colombia. © 2018 Society of Chemical Industry and John Wiley &amp; Sons, Ltd

Evaluation of the antimicrobial efficacy and skin safety of a novel color additive in combination with chlorine disinfectants

A novel color additive colorizes chlorine disinfectants blue to improve visibility and enhance spray surface coverage, and it fades to colorless to indicate elapsed contact time. We investigated its interactions with 3 chlorine disinfectants to determine if the additive would adversely affect the disinfectants' antimicrobial efficacy or skin safety. We tested 0.5% sodium hypochlorite, 0.2% calcium hypochlorite, and 0.5% sodium dichloroisocyanurate (NaDCC) alone versus with color additive. An independent laboratory tested efficacy against Staphylococcus aureus, Pseudomonas aeruginosa, Vibrio cholerae, and human coronavirus 229E. An independent laboratory also tested direct skin irritation. Chlorine disinfectants with and without color additive achieved equal levels of efficacy against the tested pathogens. Against S. aureus, 0.5% sodium hypochlorite with and without color additive met Environmental Protection Agency criteria for disinfection success. Against human coronavirus 229E, 0.5% sodium hypochlorite alone failed disinfection success criteria, whereas 0.5% sodium hypochlorite with color additive achieved full viral inactivation (≥4.50 log10 reduction). Against V. cholerae, 0.2% calcium hypochlorite alone and with color additive achieved 5.99 log10 and >6.03 log10 reductions, respectively. Against S. aureus and P. aeruginosa, 0.5% NaDCC with and without color additive achieved >4.9 log10 and >3.54 log10 reductions, respectively. All 3 chlorine disinfectants with color additive tested as negligible skin irritants. This color additive can be combined with chlorine disinfectants without adversely affecting antimicrobial efficacy or skin safety.

Cancer and Non-Cancer Risk of Arsenic in Drinking Water: A Case Study

Arsenic is a toxic element, which is found naturally in water sources. Due to its high toxicity it has become a serious problem in drinking water sources and also affects the health of communities. Therefore, in the present study, risk estimation and the probability of adverse health effects of exposure to arsenic from drinking water was evaluated in the rural areas of Qom province. Water samples were taken from 44 rural areas with regard to the number of rural areas and also the type of water distribution systems. The intensity, duration and frequency of exposure to arsenic in drinking water were determined. Then the hazard quotient and cancer risks ware calculated. Results showed that more than 16 of the rural population was exposed to arsenic with level above 10 mu g/L in the rural regions of Kahak County (10 +/- 6.29 mu g/L). Results of risk assessment showed that hazard quotient (HQ) were 1.7 and 2, while the cancer risk (CR) were 76 x 10(-5) and 42 x 10(-4) for 2 groups of age 1 and 2, respectively. The results indicated that the hazard quotient is higher than 1 (HQ > 1) for group 1 and group 2. For carcinogenic effects, the study indicated that the population in the Kahak region are exposed to arsenic in drinking water with the concentration of > 10 mu g/L and they are at a very high risk for cancer, due to the fact that the cancer risk for the 2 groups are more than 7.6 and 42 times the environmental protection agency (EPA) criteria, respectively. Therefore it is recommended that at first, the source and water supply system in Kahak region is to be substituted with safe drinking water and to provide health facilities and screening tests for exposed populations.

Baseline Monitoring of Mercury Levels in Environmental Matrices in the Limpopo Province

Mercury (Hg) speciation and bioavailability were studied in surface water, surface sediment and freshwater fish samples collected upstream and downstream of the Medupi (currently under construction) and Matimba power stations in the Waterberg area, Limpopo Province. The initial survey was conducted in May 2010 and continued periodically/seasonally until October 2014. This study was designed to provide an overall description of the levels of Hg in areas potentially impacted by emissions from the coal-fired power station and provide the necessary information to enhance the understanding of the factors regulating the fate and transport of Hg in the environment. Percent loss on ignition (LOI) and ancillary water quality measurements were also carried out. In this study, the total mercury (TotHg) concentrations ranged between 0.92 and 29.13 ng/L, and 0.13 and 8.00 ng/L for methylmercury (MeHg) in water. Total Hg concentrations ranged between 0.50 and 28.60 ng/g, while the MeHg concentration ranged between 0.08 and 2.22 ng/g in sediments. Mercury concentrations in fish ranged between 40 and 1200 ng/g for TotHg, and 13.42 and 600 ng/g for MeHg. Methylmercury concentrations in freshwater fish sampled exceeded the United States Environmental Protection Agency criteria (300 ng/g) in 10% of the total fish sampled and 5% exceeded the WHO guideline (500 ng/g).

Influence of metal(loid) bioaccumulation and maternal transfer on embryo-larval development in fish exposed to a major coal ash spill

In December 2008, an earthen retaining wall at the Tennessee Valley Authority (TVA) Kingston Fossil Fuel Plant failed and released 4.1 millionm3 of coal ash to rivers flowing into Watts Bar Reservoir in east Tennessee, United States (U.S.). As part of a comprehensive effort to evaluate the risks to aquatic resources from this spill – the largest in U.S. history – we compared bioaccumulation and maternal transfer of selenium (Se), arsenic (As), and mercury (Hg) in adult redear sunfish (Lepomis macrolophus), collected two years after the spill from both coal-ash exposed and non-exposed areas of the Emory and Clinch Rivers, with the success of embryo-larval development in their offspring. Whole body and ovary concentrations of Se in female sunfish at three study sites downstream of the spill were significantly elevated (site means=4.9–5.3 and 6.7–9.0mg/kg d.w. whole body and ovary concentrations, respectively) compared with concentrations in fish from reference sites upstream of the spill site (2.2–3.2mg/kg d.w. for whole bodies and 3.6–4.8mg/kg d.w. for ovaries). However, Se concentrations in coal ash-exposed areas remain below proposed U.S. Environmental Protection Agency (USEPA) criteria for the protection of aquatic life. Site-to-site variation in fish concentrations of As and Hg were not well-correlated with ash-exposure, reflecting the multiple sources of these metal(loid)s in the affected watersheds. In 7-day laboratory tests of embryos and larvae derived from in vitro crosses of eggs and sperm from these field-collected sunfish, fertilization success, hatching success, embryo-larval survival, and incidences of developmental abnormalities did not differ significantly between ash-exposed and non-exposed fish. Furthermore, these developmental endpoints were not correlated with whole body or ovary concentrations of Se, As, or Hg in the maternal fish, or with fish size, ovary weight, or gonadal-somatic indices. Results from this and related studies associated with the Kingston coal ash spill are consistent with proposed USEPA fish-based water quality criteria for Se, and to date continue to suggest that long-term exposures to sediment containing residual ash may not present a significant chronic risk to fish populations exposed to this major coal ash release.