Environment-sensitive Fluorophore Research Articles

An automatic glucose monitoring system based on periplasmic binding proteins for online bioprocess monitoring

Glucose is one of the most vital nutrients in all living organisms, so its monitoring is critical in healthcare and bioprocessing. Enzymatic sensors are more popular as a technology solution to meet the requirement. However, periplasmic binding proteins have been investigated extensively for their high sensitivity, enabling microdialysis sampling to replace existing complex and expensive glucose monitoring solutions based on enzymatic sensors. The binding proteins are used as optical biosensors by introducing an environment-sensitive fluorophore to the protein. The biosensor's construction, characterization, and potential application are well studied, but a complete glucose monitoring system based on it is yet to be reported. This work documents the development of the first glucose sensor prototype based on glucose binding protein (GBP) for automatic and continuous glucose measurements. The development includes immobilizing the protein into reusable chips and a low-cost solution for non-invasive glucose sampling in bioprocesses using microdialysis sampling technique. A program was written in LabVIEW to accompany the prototype for the complete automation of measurement. The sampling technique allowed glucose measurements of a few micromolar to 260 mM glucose levels. A thorough analysis of the sampling mode and the device's performance was conducted. The reported measurement accuracy was 81.78%, with an RSD of 1.83%. The prototype was also used in online glucose monitoring of E. coli cell culture. The mode of glucose sensing can be expanded to the measurement of other analytes by switching the binding proteins.

Environment-Sensitive Fluorescent Probe Enables Assessment of Anaplastic Lymphoma Kinase Activity in Nonsmall Cell Lung Cancer.

Anaplastic lymphoma kinase (ALK) rearrangements have been identified as key oncogenic drivers of a subset of nonsmall cell lung cancer (NSCLC). The final chimeric protein of the fusion gene can be constitutively activated, which accounts for the growth and proliferation of ALK-rearranged tumors and thus strongly associates with cancer invasion and metastasis. Diagnostic tools enabling the visualization of ALK activity in a structure-function-based approach are highly desirable to determine ALK status and guide ALK tyrosine kinase inhibitor (ALK-TKI) treatment making. Here, we describe the design, synthesis, and application of a new environment-sensitive fluorescent probe HX16 by introducing an environment-sensitive fluorophore 4-sulfonamidebenzoxadiazole to visualize ALK activity in living cancer cells and tumor tissue slices (mouse model and human biopsy sample). HX16 is a multifunctional chemical tool based on the pharmacophore of ALK-TKI (ceritinib) and can specifically target the kinase domain of ALK with a high sensitivity. Using flow cytometry and confocal microscopy, HX16 enables visualization of ALK activity in various cancer cells with distinct ALK fusion genes, as well as xenograft mouse models. Importantly, HX16 was also applied to visualize ALK activity in a tumor biopsy from a NSCLC patient with ALK-echinoderm microtubule-associated protein-like-4 fusion gene for prediction of ALK-TKI sensitivity. These results demonstrate that strategically designed ALK-TKI-based probe allows the assessment of ALK activity in tumor tissues and hold promise as a useful diagnostic tool in predicting ALK-TKI therapy response.

Design of synthetic peptide-based fluorescence probes for turn-on detection of hyaluronan

Herein, we designed and examined a series of fluorescent peptide-based probes for turn-on detection of hyaluronan (HA), a member of the glycosaminoglycan family. We utilized two kinds of synthetic HA-binding peptides as the binding unit for HA, and each peptide was coupled with three kinds of environment-sensitive fluorophores as the signaling unit. From the examination of the peptides, fluorophores, and the position and number of fluorophore modification, we found that X7 peptide (RYPISRPRKR) labelled with an aggregation-induced emission (AIE) fluorogen, tetraphenylethene (TPE), at the N-terminal (named TPE-X7) did function as a light-up probe for HA. The response of TPE-X7 was highly selective to higher molecular weight HA in comparison with lower ones, having the possible potential for the analysis of HA size. TPE-X7 was also applicable to the quantification of HA in synovial fluids.Graphical abstract

Solvatochromic sensors detect proteome aggregation in stressed liver tissues with hepatic cancer and cirrhosis.

Protein misfolding and aggregation involve complex cellular processes with clinical implications in various diseases. However, the detection of aggregated proteomes without defined 3-D structures in a complex biological milieu is challenging. This study utilizes chromone scaffold-based environment-sensitive fluorophores P1 and P2 to detect misfolded and aggregated proteome in stressed liver cells and the liver tissues diseased patients. The reported crystallization induced emission probes (P1 and P2) exhibit both polarity and viscosity sensitivity, with emission intensity and wavelength linearly correlated to viscosity and polarity. Meanwhile, P1 and P2 selectively and generally fluoresce upon binding to various aggregated proteins. In hepatic cells, P2 outperforms P1 in detecting stress-induced global proteome aggregation. In mouse liver tissue upon drug-induced injury, the fluorescence intensity of P2 correlated with the severity of liver injury, serving as an earlier indicator for liver stress prior to ALT/AST increase. The quantification of emission wavelength reveals lower micro-environmental polarity in liver-injury tissue. In patient-derived tissues with hepatic cancer and cirrhosis, P1 and P2 also report on the presence of aggregated proteome. Together, the reported solvatochromic proteome aggregation sensors can detect hepatic proteome aggregation and analyze its local polarity in cultured cell lines, animal model tissues, and human clinical samples.

Fluorescent Probes for Lipid Membranes: From the Cell Surface to Organelles

Biomembranes are ubiquitous lipid structures that delimit the cell surface and organelles and operate as platforms for a multitude of biomolecular processes. The development of chemical tools─fluorescent probes─for the sensing and imaging of biomembranes is a rapidly growing research direction, stimulated by a high demand from cell biologists and biophysicists. This Account focuses on advances in these smart molecules, providing a voyage from the cell frontier─plasma membranes (PM)─toward intracellular membrane compartments─organelles. General classification of the membrane probes can be based on targeting principles, sensing profile, and optical response. Probes for PM and organelle membranes are designed based on multiple targeting principles: conjugation with natural lipids or synthetic targeting ligands and in situ cell labeling by bio-orthogonal chemistry, conjugation to protein tags, and receptor-ligand interactions. Thus, to obtain membrane probes targeting PM with selectivity to one leaflet, we designed membrane anchor ligands based on a charged group and an alkyl chain. According to the sensing profile, we define basic membrane markers with constant emission and probes for biophysical and chemical sensing. The markers are built from classical fluorophores, exemplified by a series of bright cyanines and BODIPY dyes bearing the PM anchors (MemBright). Membrane probes for biophysical sensing are based on environment-sensitive fluorophores: (1) polarity-sensitive solvatochromic dyes; (2) viscosity-sensitive fluorescent molecular rotors; (3) mechanosensitive fluorescent flippers; and (4) voltage-sensitive electrochromic dyes. Our solvatochromic probes based on Nile Red (NR12S, NR12A, NR4A), Laurdan (Pro12A), and 3-hydroxyflavone (F2N12S) through polarity-sensing can visualize liquid ordered and disordered phases of lipid membranes, sense lipid order and its heterogeneity in cell PM, detect apoptosis, etc. Chemically sensitive probes, combining a dye, membrane-targeting ligand, and molecular recognition unit, enable the detection of pH, ions, redox species, lipids, and proteins at the biomembrane surface. In terms of the optical response profile, we can identify (1) fluorogenic (turn-on) probes, allowing background-free imaging; (2) ratiometric probes, e.g., solvatochromic probes, which enable ratiometric imaging by changing their emission/excitation color; (3) fluorescence lifetime-responsive probes, e.g., fluorescence molecular rotors and flippers, suitable for fluorescence lifetime imaging (FLIM); and (4) switchable probes, important for single-molecule localization microscopy. We showed that combining solvatochromic probes with on-off switching through a reversible binding specifically to cell PM enables the mapping of their biophysical properties with superior resolution. While the majority of efforts have been focused on PM, the probes for cellular organelles, such as endoplasmic reticulum, mitochondria, Golgi apparatus, etc., emerge rapidly. Thus, nontargeted solvatochromic probes can distinguish organelles by the emission color. Targeted solvatochromic probes based on Nile Red revealed unique signatures of polarity and lipid order of individual organelles and their different sensitivities to oxidative or mechanical stress. Lipid droplets, which are membraneless lipidic structures, constitute another interesting organelle target for probing the cell stress. Currently, we stand at the beginning of a long route with big challenges ahead, in particular (1) to achieve superior organelle specificity; (2) to label specific biomembrane leaflets, notably the inner leaflet of PM; (3) to detect lipid organization in a proximity of specific proteins; and (4) to probe biomembranes in tissues and animals.

Development of Fluorescent Turn-On Probes for CAG-RNA Repeats.

Fluorescent sensing of nucleic acids is a highly sensitive and efficient bioanalytical method for their study in cellular processes, detection and diagnosis in related diseases. However, the design of small molecule fluorescent probes for the selective binding and detection of RNA of a specific sequence is very challenging because of their diverse, dynamic, and flexible structures. By modifying a bis(amidinium)-based small molecular binder that is known to selectively target RNA with CAG repeats using an environment-sensitive fluorophore, a turn-on fluorescent probe featuring aggregation-induced emission (AIE) is successfully developed in this proof-of-concept study. The probe (DB-TPE) exhibits a strong, 19-fold fluorescence enhancement upon binding to a short CAG RNA, and the binding and fluorescence response was found to be specific to the overall RNA secondary structure with A·A mismatches. These promising analytical performances suggest that the probe could be applied in pathological studies, disease progression monitoring, as well as diagnosis of related neurodegenerative diseases due to expanded CAG RNA repeats.

Application of temperature-responsive HIS-tag fluorophores to differential scanning fluorimetry screening of small molecule libraries.

Differential scanning fluorimetry is a rapid and economical biophysical technique used to monitor perturbations to protein structure during a thermal gradient, most often by detecting protein unfolding events through an environment-sensitive fluorophore. By employing an NTA-complexed fluorophore that is sensitive to nearby structural changes in histidine-tagged protein, a robust and sensitive differential scanning fluorimetry (DSF) assay is established with the specificity of an affinity tag-based system. We developed, optimized, and miniaturized this HIS-tag DSF assay (HIS-DSF) into a 1536-well high-throughput biophysical platform using the Borrelial high temperature requirement A protease (BbHtrA) as a proof of concept for the workflow. A production run of the BbHtrA HIS-DSF assay showed a tight negative control group distribution of Tm values with an average coefficient of variation of 0.51% and median coefficient of variation of compound Tm of 0.26%. The HIS-DSF platform will provide an additional assay platform for future drug discovery campaigns with applications in buffer screening and optimization, target engagement screening, and other biophysical assay efforts.

A propeptide-based biosensor for the selective detection of Vibrio cholerae using an environment-sensitive fluorophore

Proteases are attractive targets for infectious disease diagnostics. Peptide-based sensors that are cleaved by pathogen proteases can provide a rapid readout of infection. However, identifying peptide substrates specific to a targeted pathogen is a significant challenge. Here, we demonstrate that a structured propeptide domain from a bacterial protease can be repurposed as a protease-activated biosensor of the cholera pathogen Vibrio cholerae. We found that the peptidase inhibitor I9 domain of the secreted V.cholerae protease IvaP is rapidly degraded by V.cholerae, but not by other intestinal bacteria. By conjugating the I9 domain to an environment-sensitive fluorophore, we developed a fluorescent probe that enables the species-specific detection of V.cholerae in mixed bacterial cultures without nonspecific cleavage by other bacteria or intestinal cells. Our findings demonstrate that the IvaP propeptide is sufficient to impart selectivity to a cleavage-based V.cholerae biosensor, suggesting I9 domains could potentially be harnessed for diagnostic applications.

The Journey of 1-Keto-1,2,3,4-Tetrahydrocarbazole Based Fluorophores: From Inception to Implementation.

Carbazole is a unique template associated with several biological activities. It is due to the diverse and versatile biological properties of carbazole derivatives that they are of immense interest to the research community. 1-keto-1,2,3,4-tetrahydrocarbazoles are important synthetic intermediates to obtain carbazole derivatives. Several members of this family emit fluorescence on photoexcitation. In the context of biochemical and biophysical research, designing and characterising small molecule environment sensitive fluorophores is extremely significant. This article aims to be a state of the art review with synthetic and photophysical details of a variety of fluorophores based on 1-keto-1,2,3,4-tetrahydrocarbazole skeleton.

Discovery of Environment-Sensitive Fluorescent Ligands of β-Adrenergic Receptors for Cell Imaging and NanoBRET Assay.

By fusing several environment-sensitive fluorophores to the pharmacophore mirabegron, a series of new fluorescent ligands for β-adrenergic receptors (β-ARs) were produced with a turn-on mechanism and high binding affinity to β-ARs efficiently. Compound L5 with the pyridinium moiety possessed the most favorable combination of properties after systematic comparison and optimization, including high affinity and acceptable cytotoxicity, remarkable fluorescence enhancement (up to 30-fold) upon binding with β-ARs, and feasible visualizing ability of β-ARs in living cells under no-wash conditions. Furthermore, a NanoLuc-based bioluminescence resonance energy transfer (NanoBRET) binding assay based on compound L5 was developed and may be used in high-throughput screening (HTS) in the drug discovery of β-ARs due to its unique fluorescence spectroscopic features. Overall, as the first environment-sensitive fluorescent ligand, molecule L5 could be a useful tool for understanding the pharmacology of β-ARs.

Understanding calmodulin regulation of RyR1 through steady state and stopped-flow fluorescence detection of Ca2+ binding kinetics to calmodulin bound to purified full-length RyR1

Calmodulin (CaM) undergoes unique structural changes induced by Ca2+ binding, and thereby activates the skeletal muscle ryanodine receptor Ca2+ release channel (RyR1) at nanomolar [Ca2+] and inhibits it at micromolar [Ca2+]. CaM conversion from RyR1 activator to inhibitor is due to Ca2+ -binding at two EF-hand motifs in each of the two lobes of CaM. However, how CaM’s lobes contribute to this conversion is not fully understood. Here, we introduced single-cysteines for fluorescence labeling in WT and mutant CaMs (Ca2+ binding at N- or C-lobe ablated), attached the environment-sensitive fluorophore acrylodan to either lobe of these CaMs, and monitored fluorescence responses to Ca2+ association/dissociation to CaM free vs.

Design and synthesis of first environment-sensitive coumarin fluorescent agonists for MrgX2

Mas related G-protein-coupled receptor member X2 (MrgX2) has been identified as the crucial receptor in drug induced pseudo-allergic reactions and allergic diseases. In this research, the first type of fluorescent agonists (ZX1, ZX2 and ZX3) for MrgX2 were developed by conjugating environment-sensitive fluorophore coumarin to MrgX2 selective agonists (R)-ZINC-3573. Their environment-sensitive property was confirmed by the dramatically increase of fluorescent intensity after binding to the hydrophobic ligand binding domain MrgX2, which help to overcome the high background signal. Based on these characteristics, they can be used for selective visualization of MrgX2 in living cells even with their own background interference. Among these fluorescent agonists, compound ZX2 possessed splendid spectroscopic properties, outstanding pharmacological activities (EC50 = 0.93 μM, KD = 1.97 μM). And a competitive binding assay was established with ZX2 to analysis the binding affinity of MrgX2 agonists, which shown high coherence with the results of cell membrane chromatography. To our knowledge, these probes are the first fluorescent ligands of MrgX2 with agonistic activity and environment-sensitive property, which is expected to use for the development of MrgX2 molecular pharmacology and serve as a convenient high-throughput screening tool for the drug candidates targeting MrgX2.

Discovery of EGFR-Targeted Environment-Sensitive fluorescent probes for cell imaging and efficient tumor detection

Overexpression of human epidermal growth factor receptor (EGFR) plays an important role in several signaling pathways inside and outside the cell, especially in the processes of cell proliferation, differentiation, and death in various cancers. Due to the complexity of the structure and function of EGFR, research on the fluorescence visualization of EGFR protein visualization has proved challenging. One possible strategy for designing a receptor-targeting fluorescent probe with a switching mechanism is to introduce an environment-sensitive fluorophore into the drug ligand. Based on this strategic molecular design, we introduced two environment-sensitive small molecular fluorophores, dansyl chloride (DNS) and nitrobenzoxadiazole (NBD), to replace the morpholine group of gefitinib, achieving a series of fluorescent molecular probes bearing a switching mechanism. The GN probes exhibited prominent environment sensitivity, suggesting good performance as turn-on EGFR-targeting fluorescent ligands. The representative probe GN3 specifically responded to tumor cells overexpressing EGFR, which was validated with live-cell fluorescence imaging and in vivo xenograft tumor imaging. Ligand-induced EGFR phosphorylation in A431 cells was considerably inhibited by probe GN3, demonstrating that this probe still functions as an EGFR inhibitor. Owing to the turn-on response of GN3 to EGFR in tumor cells, and the competitive replacement behavior to the EGFR inhibitor gefitinib, these probes have the potential to be used for fluorescence imaging of cells overexpressing EGFR.

A Simplified Protocol to Incorporate the Fluorescent Unnatural Amino Acid ANAP into Xenopus laevis Oocyte-Expressed P2X7 Receptors.

The long intracellular P2X7 C-terminus accounts for diverse downstream effects of P2X7 activation. Although the recent determination of the cryo-EM structure of the full-length P2X7 receptor finally revealed the structure and several unexpected features of the large cytoplasmic domain, its molecular function remains enigmatic. Incorporation of unnatural amino acids (UAA) via an amber Stop codon has been a powerful tool for structure-function analysis of proteins. Voltage clamp fluorometry (VCF) with the fluorescent unnatural amino acid L-3-(6-acetylnaphthalen-2-ylamino)-2-aminopropanoic acid (ANAP) provides a means to study intracellular domain movements of ion channel receptors. In the Xenopus laevis oocyte expression system, site-specific introduction of this environment-sensitive fluorophore can be achieved by the nuclear injection of cDNA encoding an orthogonal amber suppressor tRNA/aminoacyl-tRNA synthetase pair and subsequent cytoplasmic injection of ANAP together with the respective cRNA containing the amber Stop codon. Here, we describe this protocol for expression of ANAP-labeled P2X7. In addition, we provide a simplified alternative protocol, in which we coinject cRNAs encoding the tRNA synthetase and mutant P2X7 together with the synthesized amber suppressor tRNA and ANAP in one step into the cytosol. We found that the new protocol yielded more reproducible results and was less harmful for the oocytes. By selective fluorescence labeling of the ANAP-labeled P2X7 protein in the oocyte plasma membrane and VCF recordings, we show that this method results in comparable levels of functional ANAP-labeled P2X7 protein.

An NBD tertiary amine is a fluorescent quencher and/or a weak green-light fluorophore in H2S-specific probes.

The thiolysis of NBD piperazinyl amine (NBD-PZ) is highly selective for H2S over GSH and has been widely used for the development of many H2S fluorescent probes. Whether the NBD amine in H2S-specific probes could be a fluorescent quencher should be further clarified, because NBD amines have been used as environment-sensitive fluorophores for many years. Here, we compared the properties of NBD-based secondary and tertiary amines under the same conditions. For example, the emission of NBD-N(Et)2 is much smaller in water and less responsive to changes in polarity than that of NBD-NHEt. The emission of NBD-PZ-TPP is also smaller than that of NBD-NH-TPP both in aqueous buffer and in live cells. In addition, confocal bioimaging signals of NBD-PZ-TPP with excitation at 405 nm and 454 nm are much weaker than that at 488 nm. Based on these results as well as the previous work on NBD-based probes, we discuss and summarize the design strategies and sensing mechanisms for different NBD-based H2S probes. Moreover, NBD-PZ-TPP may be a useful tool for reaction with and imaging of mitochondrial H2S in live cells. This work should be useful for clarification of the roles of NBD in H2S-specific fluorescent probes as well as for facilitating the development of future NBD-based probes.

Environment-Sensitive Fluorescent Labelling of Peptides by Luciferin Analogues.

Environment-sensitive fluorophores are very valuable tools in the study of molecular and cellular processes. When used to label proteins and peptides, they allow for the monitoring of even small variations in the local microenvironment, thus acting as reporters of conformational variations and binding events. Luciferin and aminoluciferin, well known substrates of firefly luciferase, are environment-sensitive fluorophores with unusual and still-unexploited properties. Both fluorophores show strong solvatochromism. Moreover, luciferin fluorescence is influenced by pH and water abundance. These features allow to detect local variations of pH, solvent polarity and local water concentration, even when they occur simultaneously, by analyzing excitation and emission spectra. Here, we describe the characterization of (amino)luciferin-labeled derivatives of four bioactive peptides: the antimicrobial peptides GKY20 and ApoBL, the antitumor peptide p53pAnt and the integrin-binding peptide RGD. The two probes allowed for the study of the interaction of the peptides with model membranes, SDS micelles, lipopolysaccharide micelles and Escherichia coli cells. Kd values and binding stoichiometries for lipopolysaccharide were also determined. Aminoluciferin also proved to be very well-suited to confocal laser scanning microscopy. Overall, the characterization of the labeled peptides demonstrates that luciferin and aminoluciferin are previously neglected environment-sensitive labels with widespread potential applications in the study of proteins and peptides.

A Fluorescent Probe for Selective Facile Detection of H2S in Serum Based on an Albumin-Binding Fluorophore and Effective Masking Reagent.

A fluorescent probe (4-(2-(4-(diethylamino)phenyl)-4-methyl-5-oxo-4,5-dihydrothieno[3,2-b]pyridin-7-yl)phenyl 2,4-dinitrobenzenesulfonate, KF-DNBS) for facile detection of H2S in serum was developed based on the combination of an environment-sensitive fluorophore (2-(4-(diethylamino)phenyl)-7-(4-hydroxyphenyl)-4-methylthieno[3,2-b]pyridin-5(4H)-one, KF) with albumin and the 2,4-dinitrobenzene sulfonyl (DNBS) group as a recognition unit for H2S. KF-DNBS showed remarkable fluorescence enhancement due to H2S-triggered thiolysis followed by the formation of a fluorescent fluorophore (KF)-albumin complex. The H2S detection limit of KF-DNBS was estimated to be 3.2 μM, and KF-DNBS achieves a high selectivity to H2S over biothiols by employing 2-formyl benzene boronic acid (2-FBBA) as an effective masking reagent. Furthermore, under optimized sensing conditions, KF-DNBS could be applied to accurately determine spiked H2S in human serum without the need for any further procedure for the removal of serum proteins.

A Multichannel Pattern-Recognition-Based Protein Sensor with a Fluorophore-Conjugated Single-Stranded DNA Set.

Recently, pattern-recognition-based protein sensing has received considerable attention because it offers unique opportunities that complement more conventional antibody-based detection methods. Here, we report a multichannel pattern-recognition-based sensor using a set of fluorophore-conjugated single-stranded DNAs (ssDNAs), which can detect various proteins. Three different fluorophore-conjugated ssDNAs were placed into a single microplate well together with a target protein, and the generated optical response pattern that corresponds to each environment-sensitive fluorophore was read via multiple detection channels. Multivariate analysis of the resulting optical response patterns allowed an accurate detection of eight different proteases, indicating that fluorescence signal acquisition from a single compartment containing a mixture of ssDNAs is an effective strategy for the characterization of the target proteins. Additionally, the sensor could identify proteins, which are potential targets for disease diagnosis, in a protease and inhibitor mixture of different composition ratios. As our sensor benefits from simple construction and measurement procedures, and uses accessible materials, it offers a rapid and simple platform for the detection of proteins.

Distinguishing Potassium Channel Resting State Conformations in Live Cells with Environment-Sensitive Fluorescence.

Ion channels are polymorphic membrane proteins whose high-resolution structures offer images of individual conformations, giving us starting points for identifying the complex and transient allosteric changes that give rise to channel physiology. Here, we report live-cell imaging of voltage-dependent structural changes of voltage-gated Kv2.1 channels using peptidyl tarantula toxins labeled with an environment-sensitive fluorophore, whose spectral shifts enable identification of voltage-dependent conformation changes in the resting voltage sensing domain (VSD) of the channel. We synthesize a new environment-sensitive, far-red fluorophore, julolidine phenoxazone (JP) azide, and conjugate it to tarantula toxin GxTX to characterize Kv2.1 VSD allostery during membrane depolarization. JP has an inherent response to the polarity of its immediate surroundings, offering site-specific structural insight into each channel conformation. Using voltage-clamp spectroscopy to collect emission spectra as a function of membrane potential, we find that they vary with toxin labeling site, the presence of Kv2 channels, and changes in membrane potential. With a high-affinity conjugate in which the fluorophore itself interacts closely with the channel, the emission shift midpoint is 50 mV more negative than the Kv2.1 gating current midpoint. This suggests that substantial conformational changes at the toxin-channel interface are associated with early gating charge transitions and these are not concerted with VSD motions at more depolarized potentials. These fluorescent probes enable study of conformational changes that can be correlated with electrophysiology, putting channel structures and models into a context of live-cell membranes and physiological states.

Near-infrared temperature-switchable fluorescence nanoparticles.

Near infrared (NIR) environment-sensitive fluorophores are highly desired for many biomedical applications because of its non-invasive operation, high sensitivity and specificity, non-ionizing radiation and deep penetration in biological tissue. When the fluorophores are appropriately encapsulated in or conjugated with some thermal-sensitive polymers, they could work as excellent temperature-sensing probes. In this study, we synthesized and characterized a series of NIR temperature-switchable nanoparticles based on two series of NIR fluorophores aza-BODIPY (ADP is used for abbreviation in this work) and Zinc phthalocyanine (ZnPc) and four pluronic polymers (F127, F98, F68 and F38). Encapsulating the fluorophores in the polymers by sonication, we synthesized the nanoparticles that showed switch-like functions of the fluorescence intensity (and/or lifetime) as the temperature, with high switch on-to-off ratio. We also investigated various factors that might change the temperature thresholds (Tth) of the switch functions, in order to control Tth during synthesis. These nanoparticles showed excellent temperature-switchable properties of fluorescence intensity and/or lifetime. Meanwhile, some factors (i.e., pluronic categories and nanoparticles' concentration) significantly affected the nanoparticles' Tths while other (i.e., fluorophore categories) that weakly affected Tths. By selecting appropriate pluronic categories and adjusting the nanoparticle's concentration, we can synthesize the nanoparticles with a wide range of Tths. These temperature-switchable fluorescence nanoparticles can be used for biomedical imaging and in vivo tissue temperature sensing/imaging.