Enhanced Device Stability Research Articles

Tetrabutylammonium Hydroxide-Functionalized Ti3C2Tx MXene for Significantly Improving the Photovoltaic Performance of Perovskite Solar Cells.

An appropriate electron transport layer (ETL) or cathode buffer layer (CBL) is critical for high-performance perovskite solar cells (PVSCs). In this work, tetrabutylammonium hydroxide (TBAOH)-functionalized Ti3C2Tx MXene (TBAOH-Ti3C2Tx) is developed to improve the photovoltaic performance of PVSCs. TBAOH-Ti3C2Tx is synthesized by HF etching and then TBAOH intercalation, and TBAOH can effectively attach to the Ti3C2Tx surface during the intercalation process. In hole transport material (HTM)-free carbon-based PVSCs with the structure of ITO/ETL/MAPbI3/carbon, the SnO2 doped by TBAOH-Ti3C2Tx (SnO2:TBAOH-Ti3C2Tx) as ETL shows decreased WF and increased conductivity and improves the growth of the perovskite film with a larger grain and significantly reduced defects, which synergistically facilitate charge transport and extraction and reduce charge recombination. The HTM-free carbon-based PVSC with SnO2:TBAOH-Ti3C2Tx ETL exhibits a significantly higher PCE of 14.93% with enhanced device stability compared to the control device with pristine SnO2 ETL (11.95%) and also outperforms most of the HTM-free carbon-based PVSCs with MAPbI3 perovskite reported so far. In traditional inverted PVSCs with the structure of ITO/PTAA/MAPbI3/PCBM/CBL/Ag, the TBAOH-Ti3C2Tx is utilized as a CBL to significantly enhance device performance with a high PCE of 21.16%, which is obviously superior than that (16.26%) of the control device without CBL. The impressive results indicate that tetrabutylammonium hydroxide-functionalized Ti3C2Tx MXene possesses great application potential in different functional layers for high-performance PVSCs.

Enabling High‐Efficiency and Stable Binary Organic Solar Cells by Solid Additive‐Assisted Morphology Modulation

AbstractThe solid additive strategy represents a simple yet effective approach to achieving high‐efficiency organic solar cells (OSCs) by enhancing the morphology of the active layer. In this study, a highly volatile solid additive, 2,4,6‐trichloro‐1,3,5‐triazine (TCT), is employed to modulate the morphology. Unlike other solid additives previously reported, TCT exhibits remarkable intermolecular interactions with both polymer donor and acceptor, offering two distinct advantages. Firstly, TCT notably enhances the crystallinity and molecular order of the blend film, subtly optimizing the fiber network structure within, thereby facilitating carrier transport and significantly improving the mobility of the blend film. Secondly, TCT stabilizes the bi‐continuous fibrous morphology of the polymer donor and acceptor, mitigating the morphological evolution of the active layer and enhancing device stability. Consequently, the D18:L8‐BO:TCT device exhibits a higher power conversion efficiency of 19.50% compared to the D18:L8‐BO device (18.13%). Furthermore, after 960 h of storage, the OSC device treated with TCT retains 90% of its initial PCE, significantly outperforming the D18:L8‐BO device (73%). This study presents a promising avenue for achieving high‐performance OSCs through manipulating the active layer morphology with solid additives.

PTAA‐infiltrated thin‐walled carbon nanotube electrode with hidden encapsulation for perovskite solar cells

AbstractIn perovskite solar cells (PSCs), expensive gold or silver metal has traditionally been utilized as the rear electrode for highly efficient performance. In this context, carbon nanotube (CNT) electrodes have been considered promising rear electrodes because of their excellent electrical conductivity, mechanical strength, and chemical stability in PSCs. Despite these favorable characteristics, concerns have been raised about the power conversion efficiency (PCE) and stability of PSCs based on CNTs due to the porosity of CNT electrodes. In this study, we employed both poly(triarylamine) (PTAA) infiltration and rear electrode hidden encapsulation approaches to address issues related to the porosity of thin‐walled carbon nanotube (TWCNT) electrodes to achieve high efficiency and stability. The infiltration of low‐molecular‐weight PTAA into the TWCNT electrode reduced electrode porosity while simultaneously improving the interfacial contact of the TWCNT layer with the perovskite layer. Furthermore, a novel encapsulation design was employed to prevent air and water exposure of the TWCNT electrode, which significantly enhanced device stability. PSCs with TWCNT rear electrodes developed on the basis of these strategies have the best PCE of 19.5% and show long‐term stability, retaining 96% and 74% of the initial PCE after 225 h at maximum power point tracking under AM 1.5G illumination and 916 h at 85°C/85% relative humidity, respectively.image

Saturation Mobility of 100 cm2 V-1 s-1 in ZnO Thin-Film Transistors through Quantum Confinement by a Nanoscale In2O3 Interlayer Using Spray Pyrolysis.

In this study, we present a comprehensive study on the fabrication and characterization of heterojunction In2O3/ZnO thin-film transistors (TFTs) aimed at exploiting the quantum confinement effect to enhance device performance. By systematically optimizing the thickness of the crystalline In2O3 (c-In2O3) layer to create a narrow quantum well, we observed a significant increase in saturation mobility (μSAT) from 12.76 to 97.37 cm2 V-1 s-1. This enhancement, attributed to quantum confinement, was achieved through the deposition of a 3 nm c-In2O3 semiconductor via spray pyrolysis. Various In2O3 layer thicknesses (2-5 nm) were obtained by adjusting precursor solution concentration, flow rate, and number of spray cycles. Post annealing treatments were employed to reduce the defects at the interface and within the oxide film, enhancing device stability and performance. Transmission electron microscopy (TEM) confirmed the uniformity of the c-In2O3 film thickness, while variations in thickness significantly influenced TFT performance, particularly the turn-on voltage (VGS) due to changes in the carrier concentration. Ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS) supported the formation of a potential well with a two-dimensional electron gas (2DEG). The study of single and multiple superlattice structures of consecutive c-In2O3 and c-ZnO layers provided insights into the effects of multiple quantum wells on the TFT performance. This research presents an advanced approach to TFT optimization, highlighting high reliability, and environmental and bias stabilities. These lead to enhanced mobility and performance uniformity through the precise control of c-In2O3 layer thickness for the quantum confinement effect.

One-Pot Fabrication of Copper-Doped WO3·H2O Opto-Functional Layered Device using Submerged Photosynthesis of Crystallites.

This study introduces a one-pot, submerged photosynthesis of crystallites (SPsC) method for fabricating monohydrate tungstic acid (WO3·H2O) nanoplates directly integrated onto a stainless steel mesh, offering a simplified production and enhanced device stability for optical functional applications. The fabricated devices demonstrate exceptional broadband light absorption across the ultraviolet (UV), visible (Vis), and near-infrared (NIR) ranges. Notably, 1% Cu doping significantly boosts the NIR absorption, yielding a high solar utilization efficiency of 81.40%. In solar water evaporation experiments, the devices exhibit a maximum temperature increase of 13 °C under 1-Sun (100 mW/cm2) illumination, achieving an energy conversion efficiency of 32.5%. Moreover, electrochemical characterization reveals light-induced conductivity changes and enhanced current density, suggesting potential applications in rectifying devices. This versatile and environmentally conscious SPsC fabrication method holds promise for the sustainable development of diverse nanodevices.

Desıgn of quantum-dot semiconductor optical amplifiers wıth near-zero linewidth enhancement factor

The linewidth enhancement factor (LWEF) of a semiconductor optical amplifier (SOA) quantifies refractive index fluctuations in the gain medium, which induce phase distortion in the amplified optical signal. Optoelectronic systems employing SOAs with high LWEFs often exhibit poor device stability and beam coherence. Thus, designing SOAs with low LWEF is imperative. Recently, Quantum-Dot (QD) SOAs have emerged as a solution for LWEF suppression due to quantum-confinement effects enabling tunability of the QD carrier density and emission frequency. In this study, we aim to design a composite active region comprised of a host medium and the embodied QDs, to explore the corresponding LWEF variation and propose the ultimate design strategy to achieve near-zero LWEF in QD SOAs for enhancing device stability and beam coherence. Our approach entails modeling the refractive index of the composite active region using effective medium approximation via Maxwell–Garnett mixing formulation. We then extensively tune key SOA parameters, including QD carrier density, QD emission frequency, and the collision-time constant of the carriers to uncover the optimal configuration for minimizing the LWEF. Based on empirical values, we have developed and validated a simple yet effective algorithm that precisely simulates LWEF behavior in response to changes in key QD SOA parameters. This approach offers a straightforward model for estimating LWEF variation, and its corresponding minimization in QD SOAs without requiring complex experimental measurement techniques.

Enhancing Specific Detectivity and Device Stability in Vacuum-Deposited Organic Photodetectors Utilizing Nonfullerene Acceptors.

Organic photodetector (OPD) studies have undergone a revolutionary transformation by introducing nonfullerene acceptors (NFAs), which provide substantial benefits such as tunable band gaps and enhanced absorption in the visible spectrum. Vacuum-processed small-molecule-based OPD devices are presented in this study by utilizing a blend of boron subphthalocyanine (SubPc) and chlorinated subphthalocyanine (Cl6SubPc) as the active layer. Four different active layer thicknesses are further investigated to understand the intrinsic phenomena, unveiling the suppression of dark current density while maintaining photoexcitation and charge separation efficiency. Experimental results reveal that, at an applied bias of -3 V, the 50-nm-thick active layer achieves a remarkably low dark current density of 1.002 nA cm-2 alongside a high external quantum efficiency (EQE) of 52.932% and a responsivity of 0.226 A W-1. These impressive performance metrics lead to a specific detectivity of 1.263 × 1013 Jones. Furthermore, the findings offer new insights into intrinsic phenomena within the bulk heterojunction (BHJ), such as thermally generated current and exciton quenching. This integration is potentially well-heeled to revolutionize display technology by combining high-sensitivity photodetection, offering new possibilities for novel display panels with sensing applications.

Multifaceted anchoring ligands for uniform orientation and enhanced cubic-phase stability of perovskite quantum dots

All-inorganic CsPbI3 perovskite quantum dots (PQDs) hold significant potential for next-generation photovoltaics due to their unique optoelectronic properties, and the surface-bound ligand playing a key role in the stability and functionality of CsPbI3 PQDs. Initially used long-chain ligands in PQDs synthesis stabilize the black phase but hinder charge transport when employed to solar cells, necessitating their replacement with shorter ones. However, this leads to the formation of surface defects and loss of tensile strain, resulting in the transition to the undesired orthorhombic phase (δ-phase) and compromising PQD solar cell performance. Therefore, developing a ligand exchange process that achieves the optimal balance between conductivity and stability in PQD solid films continues to be a significant challenge. To address these issues, we developed an efficient ligand-exchange process utilizing a multifaceted anchoring ligand, 2-thiophenemethylammonium iodide (ThMAI). The larger ionic size of ThMA+ compared to Cs+ facilitates the restoration of surface tensile strain in PQDs, while its thiophene and ammonium groups enable effective passivation of surface defects. Owing to these advantages, ThMAI-treated CsPbI3 PQD thin films exhibit improved carrier lifetime, uniform PQD orientation, and increased ambient stability. As a result, the ThMAI-treated CsPbI3 PQD solar cells demonstrate an improved power conversion efficiency (PCE) of 15.3 % and an enhanced device stability.

Conjugation-Broken Dimer Acceptors Enable High-Efficiency, Stable, and Flexibility-Robust Organic Solar Cells.

Dimer acceptors in organic solar cells (OSCs) offer distinct advantages, including a well-defined molecular structure and excellent batch-to-batch reproducibility. Their high glass transition temperature (Tg) aids in achieving an optimal kinetic morphology, thereby enhancing device stability. Currently, most of dimer acceptor materials are linked with conjugated units in order to obtain high power conversion efficiencies (PCEs). In this study, different from previous works on conjugation-linked dimer acceptors, a novel series of dimer acceptors are synthesized (named T1, T4, T6, and T12), each linked with different flexible alkyl linkers, and investigated their PCEs, device stability, and flexibility robustness. When blended with PM6, the T6-based device achieves a PCE of 17.09%, comparable to the fully conjugated T0-based device's PCE of 17.12%. The molecular dynamics simulations anddensity functional theorycalculations suggested that flexible conjugation-broken linkers (FCBLs) promote intermolecular electronic couplings, thereby maintaining good electron mobilities of dimer acceptors. Notably, the T6-based device exhibits impressive long-term stability with a T80 lifetime of 1427h, while in the T0-based device, T80 is only 350h. The present work has thus established the relationship between the length of flexible alkyl linkers in such dimer acceptors and the performance and stability of OSCs, which is important to further designing new materials for the fabrication of efficient and stable OSCs.

Buried Interface Passivation of Sn–Pb Narrow‐Bandgap Perovskite for Highly Efficient All‐Perovskite Tandem Solar Cells

All‐perovskite tandem solar cells (ATSCs) present a remarkable opportunity to overcome the Shockley–Queisser efficiency limit of single‐junction solar cells. However, the stability of ATSCs significantly lags that of their pure Pb‐based single‐junction counterparts. Recent studies have identified that the widely used poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) hole transport layer in narrow‐bandgap (NBG) tin–lead (Sn–Pb) perovskite solar cells (PSCs) hinders the efficiency and stability. Herein, a patching strategy to optimize the interface between perovskite and PEDOT:PSS is proposed. Both theoretical and experimental studies reveal that PenA+ and Ac− can decrease defect states at the interface and strengthen the binding between PEDOT:PSS and Sn–Pb perovskite. Furthermore, the pentylammonium acetate (PenAAc) interlayer improves carrier extraction and suppresses the oxidation of Sn2+ to Sn4+. With the PenAAc buried layer, the fabricated NBG PSCs obtain an impressive power conversion efficiency (PCE) of 21.86%, along with significantly enhanced device stability. By integrating the buried passivated NBG Sn–Pb perovskite with a 1.75 eV wide‐bandgap PSC, the two‐terminal ATSC achieves a PCE of 26.54%. This work provides a valuable approach to fabricate efficient and stable NBG PSCs.

Evaporated Nickel Oxide Films with Slow Annealing and Interface Modification for Perovskite Solar Cells.

Electron-beam-evaporated nickel oxide (NiOx) films are known for their high quality, precise control, and suitability for complex structures in perovskite (PVK) solar cells (PSCs). However, untreated NiOx films have inherent challenges, such as surface defects, relatively low intrinsic conductivity, and shallow valence band maximum, which seriously restrict the efficiency and stability of the devices. To address these challenges, we employ a dual coordination optimization strategy. The strategy includes low heating rate annealing of NiOx films and using an aminoguanidine nitrate spin coating process on the surfaces of NiOx films to strategically modify NiOx films itself and the interface of NiOx/PVK. Under the synergistic effect of this dual optimization method, the quality of the films is significantly improved and its p-type characteristics are enhanced. At the same time, the interface defects and energy level alignment of the films are effectively improved, and the charge extraction ability at the interface is improved. The combined treatment significantly improved the efficiency of inverted PSCs, from 17.85% to 20.31%, and enhanced device stability under various conditions. This innovative dual-coordinated optimization strategy provides a clear and effective framework for improving the performance of NiOx films and inverted PSCs.

Directional Management Self‐Additive Spacer Cations for Stable 2D Ruddlesden–Popper Perovskite Solar Cells with Efficiency over 21%

Abstract2D Ruddlesden–Popper perovskites are highly regarded materials for improving the stability of perovskite solar cells (PSCs). Wherein, self‐additive 2D perovskites have recently been proposed to provide substantial strategies for managing the crystallization kinetics and bulk defects. For a profound understanding of the formation mechanisms, herein, with selecting three self‐additive 2D perovskites as demonstrations, a comprehensive analysis of the self‐additive behavior combing experimental and theoretical calculations is conducted. Self‐additive 2D perovskites exhibit more suitable formation energies and strong interaction, which is conducive to realize the self‐additive effect to form more stable structure. As demonstrated, glycine (Gly)‐based spacer cations played a pivotal role in the nucleation and growth of 2D perovskites by adjusting the aggregation state of colloids precursor, resulting in excellent‐quality films with large average grain size (≈3 µm). Meanwhile, theoretical analysis of electronic distribution and binding energies (Eb) revealed that glycine ethyl ester (Gly‐E) perovskite possesses highly robust internal interactions, which will effectively mitigate defect formation and enhance device stability. Endowing with the above outstanding feature, Gly‐E devices exhibited an optimized PCE of 21.60%, one of the highest PCEs among all 2D RP PSCs (n ≤ 6). The findings provide a basis for the rational design of self‐additive 2D perovskites and achieving highly‐performance 2D RP PSCs.

Dual Buried Interface Engineering for Improving Air-Processed Inverted FAPbI3 Perovskite Solar Cells.

Fabricating perovskite solar cells (PSCs) in an ambient environment provides low-cost preparation routes for solar cells that are suitable for large-scale production. Compared with methylammonium (MA)- based perovskite materials, formamidinium lead iodide (FAPbI3) possesses a more favorable bandgap for light harvesting and better thermostability. However, the phase transition from the α-phase to the δ-phase easily occurs, making it challenging for ambient-air processing. Herein, we develop a buried interface engineering strategy via two molecules including 1,4-bis(diphenylphosphino)butane (DPPB) as well as [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl] phosphonic acid (Me-4PACz) to optimize air-processed inverted FAPbI3 PSCs. This strategy regulates the crystallization process of the air-fabricated FAPbI3 perovskite film, leading to a purer α-phase with significantly enhanced crystallinity and enlarged grain sizes. Apart from improving the bulk perovskite film, the defects at the NiOx/perovskite interface are passivated, and the energy levels are better matched in the modified device, which facilitates efficient carrier extraction. Resultantly, the target device processed in the open air achieves a dramatically improved power conversion efficiency from 11.37% to 18.45%, in association with an enhanced device stability.

Multifunctional ytterbium oxide buffer for perovskite solar cells.

Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.

Surface Reconstruction with Aprotic Trimethylsulfonium Iodide for Efficient and Stable Perovskite Solar Cells.

Organic ammonium salts are widely used for surface passivation to enhance the photovoltaic (PV) performance and stability of perovskite solar cells (PSCs). However, the protic nature of ammonium units results in the quick degradation of perovskites due to the hydrogen bonding interaction with water molecules. Recently, organo-sulfur compounds have attracted growing interest as passivation layers on three-dimensional perovskites due to their moisture-resistive behavior. Herein, trimethylsulfonium iodide (TMSI), an aprotic S-based organic compound, is employed for surface modification of methylammonium lead iodide-based PSCs to impede moisture penetration, improve charge transfer, and passivate surface defects. The TMSI effectively passivates uncoordinated Pb through Pb···S interactions, and the optimized PSC exhibits a power conversion efficiency (PCE) of 21.03% with an open-circuit voltage of ca. 1.13 V under one-sun illumination, while it reached up to 37.58 and 37.69% under low-intensity indoor illuminations, 1000 and 2000 lx with LED 5000 K, respectively. TMSI-treated cells display enhanced device stability by retaining 92.7% of their initial PCE after 50 days of storage in ambient conditions. This study provides a novel and effective surface reconstruction strategy with aprotic materials to improve PV performance and device stability in PSCs.

Interfacial modification using the cross-linkable tannic acid for highly-efficient perovskite solar cells with excellent stability

Although the performance of perovskite solar cells (PSCs) has been dramatically increased in recent years, stability is still the main obstacle preventing the PSCs from being commercial. PSC device instability can be caused by a variety of reasons, including ions diffusion, surface and grain boundary defects, etc. In this work, the cross-linkable tannic acid (TA) is introduced to modify perovskite film through post-treatment method. The numerous organic functional groups (–OH and CO) in TA can interact with the uncoordinated Pb2+ and I− ions in perovskite, thus passivating defects and inhibiting ions diffusion. In addition, the formed TA network can absorb a small amount of the residual moisture inside the device to protect the perovskite layer. Furthermore, TA modification regulates the energy level of perovskite, and reduces interfacial charge recombination. Ultimately, following TA treatment, the device efficiency is increased significantly from 21.31% to 23.11%, with a decreased hysteresis effect. Notably, the treated device shows excellent air, thermal, and operational stability. In light of this, the readily available, inexpensive TA has the potential to operate as a multipurpose interfacial modifier to increase device efficiency while also enhancing device stability.

Selection of phenyl hydrazine derivatives as an Sn4+ reductant for tin–lead perovskite solar cells

Proposed Sn–Pb perovskites: hydrochlorination suppresses phenyl hydrazine deprotonation, enhancing device stability, photovoltage, and efficiency at AM1.5 with sulfonamide.

Research progress of green antisolvent for perovskite solar cells.

Conventional antisolvents such as chlorobenzene and benzotrifluoride are highly toxic and volatile, and therefore not preferred for large-scale fabrication. As such, green antisolvents are favored for the eco-friendly fabrication of perovskite films. This review primarily discusses the impact of various green antisolvents on the fabrication of thin perovskite films and analyzes the main chemical characteristics of these green antisolvents. It also interprets the impact of green antisolvent treatment on crystal growth and nucleation crystallization mechanisms. It introduces the effective fabrication of large-area devices using green antisolvents and analyzes the mechanisms by which green antisolvents enhance device stability. Subsequently, several green antisolvents capable of preparing highly stable and efficient devices are listed. Finally, we outline the key challenges and future prospects of antisolvent treatment. This review paves the way for green fabrication of industrial perovskite solar cells.

Evolution of interfacial defects and energy losses during aging of organic photovoltaics

As the power conversion efficiencies of Organic Solar Cells (OSCs) approach 20 %, the stability of the device becomes an increasingly urgent issue. To enhance device stability, it is crucial to identify potential loss mechanisms. In this study, we investigated the trap-state-dependent degradation mechanism of OSCs by directly comparing devices with different hole transport layers (HTLs) that introduce distinct interfacial defect distributions. Employing electrochemical impedance spectroscopy (EIS), Fourier transform photocurrent spectroscopy (FTPS), electroluminescence quantum efficiency (EQEEL), and temperature-dependent J-V techniques, we unraveled the relationship between device degradation and interfacial trap states and energy loss in PM6:Y6 devices. A lower density of interfacial deep traps is evidently correlated with smaller non-radiative recombination losses during the aging of devices based on PEDOT:PSS. Conversely, a higher density of deep traps in aged devices with WS2 interlayers and HTL-free configurations is presumed to be responsible for a significant increase in non-radiative recombination losses. The escalating deep-trap-state density in aged devices is observed to elevate carrier recombination, consequently deteriorating device performance. Beyond the scope of the energy balance theory, an additional factor, probably attributed to the change in the work function of ITO, was found to contribute significantly to energy loss in aged cells, particularly in HTL-free devices. These results highlight the potential for improving device stability via interface engineering.

Single-component organic solar cells-Perspective on the importance of chemical precision in conjugated block copolymers.

Organic photovoltaics (OPV) present a promising thin-film solar cell technology with particular benefits in terms of weight, aesthetics, transparency, and cost. However, despite being studied intensively since the mid 90's, OPV has not entered the mass consumer market yet. Although the efficiency gap with other thin-film photovoltaics has largely been overcome, active layer stability and performance reproducibility issues have not been fully resolved. State-of-the-art OPV devices employ a physical mixture of electron donor and acceptor molecules in a bulk heterojunction active layer. These blends are prone to morphological changes, leading to performance losses over time. On the other hand, in "single-component" organic solar cells, the donor and acceptor constituents are chemically connected within a single material, preventing demixing and thereby enhancing device stability. Novel single-component materials affording reasonably high solar cell efficiencies and improved lifetimes have recently emerged. In particular, the combination of donor and acceptor structures in conjugated block copolymers (CBCs) presents an exciting approach. Nevertheless, the current CBCs are poorly defined from a structural point of view, while synthetic protocols remain unoptimized. More controlled synthesis followed by proper structural analysis of CBCs is, however, essential to develop rational structure-property-device relations and to drive the field forward. In this perspective, we provide a short overview of the state-of-the-art in single-component organic solar cells prepared from CBCs, reflect on their troublesome characterization and the importance of chemical precision in these structures, give some recommendations, and discuss the potential impact of these aspects on the field.