Enhance Tissue Integration Research Articles

Cartilage Repair: Promise of Adhesive Orthopedic Hydrogels.

Cartilage repair remains a major challenge in human orthopedic medicine, necessitating the application of innovative strategies to overcome existing technical and clinical limitations. Adhesive hydrogels have emerged as promising candidates for cartilage repair promotion and tissue engineering, offering key advantages such as enhanced tissue integration and therapeutic potential. This comprehensive review navigates the landscape of adhesive hydrogels in cartilage repair, discussing identified challenges, shortcomings of current treatment options, and unique advantages of adhesive hydrogel products and scaffolds. While emphasizing the critical need for in situ lateral integration with surrounding tissues, we dissect current limitations and outline future perspectives for hydrogel scaffolds in cartilage repair. Moreover, we examine the clinical translation pathway and regulatory considerations specific to adhesive hydrogels. Overall, this review synthesizes the existing insights and knowledge gaps and highlights directions for future research regarding adhesive hydrogel-based devices in advancing cartilage tissue engineering.

Integrating hydrogels manipulate ECM deposition after spinal cord injury for specific neural reconnections via neuronal relays.

A bioinspired hydrogel composed of hyaluronic acid-graft-dopamine (HADA) and a designer peptide HGF-(RADA)4-DGDRGDS (HRR) was presented to enhance tissue integration following spinal cord injury (SCI). The HADA/HRR hydrogel manipulated the infiltration of PDGFRβ+ cells in a parallel pattern, transforming dense scars into an aligned fibrous substrate that guided axonal regrowth. Further incorporation of NT3 and curcumin promoted axonal regrowth and survival of interneurons at lesion borders, which served as relays for establishing heterogeneous axon connections in a target-specific manner. Notable improvements in motor, sensory, and bladder functions resulted in rats with complete spinal cord transection. The HADA/HRR + NT3/Cur hydrogel promoted V2a neuron accumulation in ventral spinal cord, facilitating the recovery of locomotor function. Meanwhile, the establishment of heterogeneous neural connections across the hemisected lesion of canines was documented in a target-specific manner via neuronal relays, significantly improving motor functions. Therefore, biomaterials can inspire beneficial biological activities for SCI repair.

Nano-Based Approaches in Surface Modifications of Dental Implants: A Literature Review.

Rehabilitation of fully or partially edentulous patients with dental implants represents one of the most frequently used surgical procedures. The work of Branemark, who observed that a piece of titanium embedded in rabbit bone became firmly attached and difficult to remove, introduced the concept of osseointegration and revolutionized modern dentistry. Since then, an ever-growing need for improved implant materials towards enhanced material-tissue integration has emerged. There is a strong belief that nanoscale materials will produce a superior generation of implants with high efficiency, low cost, and high volume. The aim of this review is to explore the contribution of nanomaterials in implantology. A variety of nanomaterials have been proposed as potential candidates for implant surface customization. They can have inherent antibacterial properties, provide enhanced conditions for osseointegration, or act as reservoirs for biomolecules and drugs. Titania nanotubes alone or in combination with biological agents or drugs are used for enhanced tissue integration in dental implants. Regarding immunomodulation and in order to avoid implant rejection, titania nanotubes, graphene, and biopolymers have successfully been utilized, sometimes loaded with anti-inflammatory agents and extracellular vesicles. Peri-implantitis prevention can be achieved through the inherent antibacterial properties of metal nanoparticles and chitosan or hybrid coatings bearing antibiotic substances. For improved corrosion resistance various materials have been explored. However, even though these modifications have shown promising results, future research is necessary to assess their clinical behavior in humans and proceed to widespread commercialization.

The Effect of Iron Oxide Insertion on the In Vitro Bioactivity, and Antibacterial Properties of the 45S5 Bioactive Glass.

The aging population and increasing incidence of trauma among younger age groups have heightened the increasing demand for reliable implant materials. Effective implant materials must demonstrate rapid osseointegration and strong antibacterial properties to ensure optimal patient outcomes and decrease the chance of implant rejection. This study aims to enhance the bone-implant interface by utilizing 45S5 bioglass modified with various concentrations of Fe3O4 as a coating material. The effect of the insertion of Fe3O4 into the bioglass structure was studied using Raman spectroscopy which shows that with the increase in Fe3O4 concentration, new vibration bands associated with Fe-related structural units appeared within the sample. The bioactivity of the prepared glasses was evaluated using immersion tests in simulated body fluid, revealing the formation of a calcium phosphate-rich layer within 24 h on the samples, indicating their potential for enhanced tissue integration. However, the sample modified with 8 mol% of Fe3O4 showed low reactivity, developing a calcium phosphate-rich layer within 96 h. All the bioglasses showed antibacterial activity against the Gram-positive and Gram-negative bacteria. The modified bioglass did not present significant antibacterial properties compared to the bioglass base.

Design and Biocompatibility of a Novel, Flexible Artificial Cornea.

We sought to introduce the materials, design, and biocompatibility of a flexible and suturable artificial corneal device. Single-piece, fully synthetic, optic-skirt design devices were made from compact perfluoroalkoxy alkane. The skirt and the optic wall surfaces were lined with a porous tissue ingrowth material using expanded polytetrafluoroethylene. Full-thickness macroapertures around the skirt perimeter were placed to facilitate nutrition of the recipient cornea. Material properties including the skirt's modulus of elasticity and bending stiffness, optic light transmission, wetting behavior, topical drug penetrance, and degradation profile were evaluated. The final prototype suitable for human use has a transparent optic with a diameter of 4.60mm anteriorly, 4.28mm posteriorly, and a skirt outer diameter of 6.8mm. The biomechanical and optical properties of the device closely align with the native human cornea with an average normalized device skirt-bending stiffness of 4.7kPa·mm4 and light transmission in the visible spectrum ranging between 92% and 96%. No optical damage was seen in the 36 devices tested in fouling experiments. No significant difference was observed in topical drug penetrance into the anterior chamber of the device implanted eye compared with the naïve rabbit eye. The flexibility and biocompatibility of our artificial cornea device may offer enhanced tissue integration and decreased inflammation, leading to improved retention compared with rigid keratoprosthesis designs. We have developed a fully synthetic, flexible, suturable, optic-skirt design prototype artificial cornea that is ready to be tested in early human feasibility studies.

Biochemical and immunomodulatory insights of extracellular matrix from decellularized human whole cervix: recellularization and in vivo ECM remodeling interplay

Extracellular matrix (ECM) rich whole organ bio-scaffolds, preserving structural integrity and essential growth factors, has potential towards regeneration and reconstruction. Women with cervical anomalies or trauma can benefit from clinical cervicovaginal repair using constructs rich in site specific ECM. In this study, complete human cervix decellularization was achieved using a modified perfusion-based stir bench top decellularization method. This was followed by physico-chemical processes including perfusion of ionic agents, enzymatic treatment and washing using detergent solutions for a duration of 10–12 d. Histopathological analysis, as well as DNA quantification confirmed the efficacy of the decellularization process. Tissue ultrastructure integrity was preserved and the same was validated via scanning electron microscopy and transmission electron microscopy studies. Biochemical analysis and structural characterizations like Fourier transform infrared, Raman spectroscopy of decellularized tissues demonstrated preservation of important proteins, crucial growth factors, collagen, and glycosaminoglycans. In vitro studies, using THP-1 and human umbilical vein endothelial cell (HUVEC) cells, demonstrated macrophage polarization from M1 to M2 and vascular functional genes enhancement, respectively, when treated with decellularized human cervical matrix (DHCp). Crosslinked DHC scaffolds were recellularized with site specific human cervical epithelial cells and HUVEC, showing non-cytotoxic cell viability and enhanced proliferation. Furthermore, DHC scaffolds showed immunomodulatory effects in vivo on small rodent model via upregulation of M2 macrophage genes as compared to decellularized rat cervix matrix scaffolds (DRC). DHC scaffolds underwent neo-vascularization followed by ECM remodeling with enhanced tissue integration.

Round Autoprosthesis: Use of Adipodermaglandular Flap in T Scar Mastopexy.

This study focuses on the use of round or anatomically shaped breast autoprosthesis with different volumes prepared from the central and lower poles of the breast. The technical details and surgical outcomes for patients with varying degrees of breast ptosis are discussed. This study involved 42 patients who underwent the Wise-pattern superior pedicle mastopexy procedure using the adipodermaglandular island flap technique. The research spanned from December 2017 to August 2022. The study participants had not previously undergone breast surgery, did not desire breast implants, and exhibited grade 2 and 3 breast ptosis according to the Regnault Classification. Age and preoperative breast measurements of the patients were recorded for subsequent analysis. Measurements, such as the distance from the nipple-areolar complex to the inframammary fold and the distance from the suprasternal notch to the nipple-areolar complex, were taken both before the surgery and one year after. A systematic process was followed to identify acute and subacute complications during the postoperative follow-up period. This study involved 42 patients with a mean age of 33.9 years (range: 23-49 years). These procedures were conducted between December 2017 and August 2022. The average SN-N distance before surgery measured 26.7cm (range: 24-33cm). One year after surgery, the average SN-N distance was 23.1cm (range: 21.3-24.8cm). The follow-up duration for the examined cases ranged from 12 to 18 months on average. Among the observed cases, delayed wound healing was noted in one instance, venous insufficiency of the nipple in another, and fat necrosis in a third case. The overall complication rate in the group was determined to be 7.1%. In our study, the detachment of dermal connections at the level of the inframammary fold (IMF) and the smooth advancement of the flap in the form of an "island flap" made a contribution to upper pole fullness. Furthermore, we hypothesize that the fusion of the medial and lateral ends of the flap will enhance tissue integration during the healing process, promoting compatibility between the autoprosthesis tissue and breast tissue. Regarding the rates of complications described, classic mastopexy techniques have exhibited similar rates in our findings. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Batch Fabrication of Microelectrode Arrays with Glassy Carbon Microelectrodes and Interconnections for Neurochemical Sensing: Promises and Challenges.

Flexible multielectrode arrays with glassy carbon (GC) electrodes and metal interconnection (hybrid MEAs) have shown promising performance in multi-channel neurochemical sensing. A primary challenge faced by hybrid MEAs fabrication is the adhesion of the metal traces with the GC electrodes, as prolonged electrical and mechanical stimulation can lead to adhesion failure. Previous devices with GC electrodes and interconnects made of a homogeneous material (all GC) demonstrated exceptional electrochemical stability but required miniaturization for enhanced tissue integration and chronic electrochemical sensing. In this study, we used two different methods for the fabrication of all GC-MEAs on thin flexible substrates with miniaturized features. The first method, like that previously reported, involves a double pattern-transfer photolithographic process, including transfer-bonding on temporary polymeric support. The second method requires a double-etching process, which uses a 2 µm-thick low stress silicon nitride coating of the Si wafer as the bottom insulator layer for the MEAs, bypassing the pattern-transfer and demonstrating a novel technique with potential advantages. We confirmed the feasibility of the two fabrication processes by verifying the practical conductivity of 3 µm-wide 2 µm-thick GC traces, the GC microelectrode functionality, and their sensing capability for the detection of serotonin using fast scan cyclic voltammetry. Through the exchange and discussion of insights regarding the strengths and limitations of these microfabrication methods, our goal is to propel the advancement of GC-based MEAs for the next generation of neural interface devices.

OGBN O08 The Safety and Efficacy of Laparoscopic Hiatus Hernia Repair with Biosynthetic Mesh (Phasix-ST®): A Single Centre Experience

Abstract Background Surgical management of large hiatus hernia (> 5 cm defect) remains challenging due to high recurrence rates. Mesh augmentation in laparoscopic hiatal hernia repair has been used to reduce recurrences but carries risks such as mesh erosion, contraction, infection, and reaction to the foreign body. Introducing biosynthetic meshes offers a promising adjunct to primary suture repair of hiatal defects with enhanced tissue integration and reduced risk of infection. Phasix™ ST mesh is a biosynthetic mesh made of Poly-4-Hydroxybutyrate (P4HB). This study evaluates early patient outcomes following laparoscopic hiatal hernia repair with Phasix™ ST mesh, including its safety and efficacy profile. Methods This study was to evaluate outcomes of laparoscopic hiatus hernia repair using Phasix™ ST mesh in adult patients (>18 years) at our institution. All patients undergoing this procedure between September 2020 to April 2023 were identified from a prospectively maintained database. Our standardised technique involved on-lay crural reinforcement with Phasix™ ST mesh after primary closure of the hiatal defect, followed by partial fundoplication. Patient records were reviewed retrospectively to assess these end-point measures: postoperative mortality and morbidity at 30 days, functional results reported during the follow-up period, and recurrence rates of hiatus hernia. Results Conclusions This is the first study in the United Kingdom demonstrating that laparoscopic hiatus hernia repair with the use of Phasix™ ST mesh for crural reinforcement has low-rate complications, with most patients reporting symptom improvement and discontinuing PPI use in the early-term follow–up. Further long-term studies are needed to validate these findings.

Effects of nutrient concentration and scaffold elasticity on the tissue growth in a tissue engineering scaffold channel

Tissue-engineering scaffolds contain channels lined by cells that allow nutrient-rich culture medium to pass through to encourage cell proliferation. Several factors have significant impacts on the tissue growth, including the nutrient flow rate, concentration in the feed, scaffold elasticity, and cell properties. Recent studies have investigated these effects separately; however, in this work, we examine all of them simultaneously. Our objectives in this work are as follows: (i) developing a mathematical model describing the nutrient flow dynamics and concentration, scaffold elasticity, and cell proliferation; (ii) solving the model and then simulating the cell proliferation process; and (iii) optimizing the initial configuration of the scaffold channels to maximize the cell growth. The results of our study demonstrate that the rate of nutrient consumption by the cells (cell hunger rate) and the scaffold elastic compliance have an impact on tissue growth, with higher cell hunger rates leading to longer incubation periods, while scaffold elastic compliance slightly affects overall growth. Furthermore, decreasing the scaffold elastic compliance while maintaining a constant nutrient consumption rate results in an optimal funnel-shaped channel geometry, where the upper part of the channel is larger than the downstream, promoting enhanced tissue integration and functionality.

Influence of surface engineering on 3D printed Ti lattice structure towards enhanced tissue integration: An in vitro and in vivo study

Reconstruction of segmental defects are popularly approached with surface engineered additively manufactured scaffolds owing to its enhanced post-surgery tissue integration properties. The present work is aimed at fabrication of Ti lattice structures using 3D printing, with a novel approach of silane chemistry-based surface modification of those Ti-surfaces with osteogenic peptides (OGP). The lattice structures with 0.6 mm strut-diameter having 0.5 mm inter-strut distance were chosen for fabrication using an extrusion-based 3D printing. Based on the evidence, it could be concluded that extrusion-based 3D printing is an optimal alternative as compared to those high cost incurring additive manufacturing processes. Therefore, OGP were grafted on the pristine Ti-surfaces using a silane chemistry based novel vapour deposition process. In vitro assessments of the surface modified scaffolds using human amniotic derived mesenchymal stem cells showed evidence of enhanced cell adhesion and viability. In vivo subcutaneous study in rat models of the surface modified Ti-scaffolds also showed enhanced tissue integration in terms of Collagen I deposition around the boundary of the tissue-integrated struts as compared to those of pristine scaffolds. The study has established that the novel surface modification technique is capable to engineer the Ti-surfaces towards enhanced tissue integration in vivo.

Polydopamine Incorporation Enhances Cell Differentiation and Antibacterial Properties of 3D-Printed Guanosine-Borate Hydrogels for Functional Tissue Regeneration.

Tissue engineering focuses on the development of materials as biosubstitutes that can be used to regenerate, repair, or replace damaged tissues. Alongside this, 3D printing has emerged as a promising technique for producing implants tailored to specific defects, which in turn increased the demand for new inks and bioinks. Especially supramolecular hydrogels based on nucleosides such as guanosine have gained increasing attention due to their biocompatibility, good mechanical characteristics, tunable and reversible properties, and intrinsic self-healing capabilities. However, most existing formulations exhibit insufficient stability, biological activity, or printability. To address these limitations, we incorporated polydopamine (PDA) into guanosine-borate (GB) hydrogels and developed a PGB hydrogel with maximal PDA incorporation and good thixotropic and printability qualities. The resulting PGB hydrogels exhibited a well-defined nanofibrillar network, and we found that PDA incorporation increased the hydrogel's osteogenic activity while having no negative effect on mammalian cell survival or migration. In contrast, antimicrobial activity was observed against the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis. Thus, our findings suggest that our PGB hydrogel represents a significantly improved candidate as a 3D-printed scaffold capable of sustaining living cells, which may be further functionalized by incorporating other bioactive molecules for enhanced tissue integration.

Prodrug inspired bi-layered electrospun membrane with properties of enhanced tissue integration for guided tissue regeneration.

Guided tissue regeneration (GTR) membranes play a vital role in periodontal surgery. Recently a series of composite electrospun membranes have been fabricated to improve the unexpected biodegradation of collagen-based GTR membranes. However, their tissue integrity needs to be studied in depth. In this study, a bi-layered electrospun membrane (BEM) inspired by "prodrug" was fabricated, which contained a dense-layer (BEM-DL) and a potential loose-layer (BEM-LL). The nanofibers of BEM-DL were composed of poly(l-lactic-co-glycolic acid) and tilapia skin collagen (TSC). Whereas the BEM-LL consisted of two types of nanofibers, one was the same as BEM-DL and the other was made from TSC. The morphology, degradation in vitro, cytocompatibility and biocompatibility in rats were investigated with a poly(lactic-co-glycolic acid) electrospun membrane (PLGA) as the negative control. The pore size of BEM-LL soaked for 7days became larger than the original sample (164.8±90.9 and 52.5±21.0μm2 , respectively), which was significantly higher (p<.05) than that of BEM-DL and PLGA. The BEM-LL displayed a larger weight loss rate of 82.3±3.6% than the BEM-DL of 46.0±2.8% at day 7 because of the rapid degradation of TSC fibers. The cytocompatibility test demonstrated that L929 cells were only spread on the surface of the BEM-DL while MC3T3-E1 cells grew into the BEM-LL layer. The subcutaneous implantation test further proved that BEM-DL performed as a cellular barrier, whereas BEM-LL was conducive to cell infiltration as deep as 200μm with reduced fibrous encapsulation. Herein, the BEM inspired by "prodrug" is a promising GTR membrane with a property of enhanced tissue integration.

Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering.

Skeletal muscles play important roles in critical body functions and their injury or disease can lead to limitation of mobility and loss of independence. Current treatments result in variable functional recovery, while reconstructive surgery, as the gold-standard approach, is limited due to donor shortage, donor-site morbidity, and limited functional recovery. Skeletal muscle tissue engineering (SMTE) has generated enthusiasm as an alternative solution for treatment of injured tissue and serves as a functional disease model. Recently, bioprinting has emerged as a promising tool for recapitulating the complex and highly organized architecture of skeletal muscles at clinically relevant sizes. Here, skeletal muscle physiology, muscle regeneration following injury, and current treatments following muscle loss are discussed, and then bioprinting strategies implemented for SMTE are critically reviewed. Subsequently, recent advancements that have led to improvement of bioprinting strategies to construct large muscle structures, boost myogenesis in vitro and in vivo, and enhance tissue integration are discussed. Bioinks for muscle bioprinting, as an essential part of any bioprinting strategy, are discussed, and their benefits, limitations, and areas to be improved are highlighted. Finally, the directions the field should expand to make bioprinting strategies more translational and overcome the clinical unmet needs are discussed.

Injectable pH-responsive adhesive hydrogels for bone tissue engineering inspired by the underwater attachment strategy of marine mussels

A major challenge in tissue engineering is the development of alternatives to traditional bone autografts and allografts that can regenerate critical-sized bone defects. Here we present the design of injectable pH-responsive double-crosslinked adhesive hydrogels inspired by the molecular mechanism and environmental post-processing of marine mussel adhesive. Nine adhesive hydrogel formulations were developed through the conjugation of crosslinkable catechol functional groups (DOPA) and the synthetic oligomer oligo[poly(ethylene glycol) fumarate] (OPF), varying the DOPA content (w/w%) and molecular weight (MW) of the OPF backbone to produce formulations with a range of swelling ratios, porosities, and crosslink densities. DOPA incorporation altered the surface chemistry, mechanical properties, and surface topography of hydrogels, resulting in an increase in material stiffness, slower degradation, and enhanced pre-osteoblast cell attachment and proliferation. When injected within simulated bone defects, DOPA-mediated interfacial adhesive interactions also prevented the displacement of scaffolds, an effect that was maintained even after swelling within physiological conditions. Taken together, OPF-DOPA hydrogels represent a promising new material to enhanced tissue integration and the prevention of the post-implantation migration of scaffolds that can occur due to biomechanical loading in vivo.

Immunomodulatory Biomaterials for Tissue Repair.

All implanted biomaterials are targets of the host's immune system. While the host inflammatory response was once considered a detrimental force to be blunted or avoided, in recent years, it has become a powerful force to be leveraged to augment biomaterial-tissue integration and tissue repair. In this review, we will discuss the major immune cells that mediate the inflammatory response to biomaterials, with a focus on how biomaterials can be designed to modulate immune cell behavior to promote biomaterial-tissue integration. In particular, the intentional activation of monocytes and macrophages with controlled timing, and modulation of their interactions with other cell types involved in wound healing, have emerged as key strategies to improve biomaterial efficacy. To this end, careful design of biomaterial structure and controlled release of immunomodulators can be employed to manipulate macrophage phenotype for the maximization of the wound healing response with enhanced tissue integration and repair, as opposed to a typical foreign body response characterized by fibrous encapsulation and implant isolation. We discuss current challenges in the clinical translation of immunomodulatory biomaterials, such as limitations in the use of in vitro studies and animal models to model the human immune response. Finally, we describe future directions and opportunities for understanding and controlling the biomaterial-immune system interface, including the application of new imaging tools, new animal models, the discovery of new cellular targets, and novel techniques for in situ immune cell reprogramming.

Deferoxamine: An Angiogenic and Antioxidant Molecule for Tissue Regeneration.

Deferoxamine (DFO) has been in use for half a century as a Food and Drug Administration-approved iron chelator, but recent studies indicate a variety of properties that could expand this drug's application into the fields of tissue and regenerative engineering. DFO has been implicated as an angiogenic agent in studies on ischemia, wound healing, and bone regeneration because of its ability to upregulate hypoxia-inducible factor-1 alpha (HIF-1α) and other key downstream angiogenic factors. DFO has also demonstrated antioxidant capabilities unrelated to its iron-chelating properties, making it a potential modulator of the oxidative stress involved in the inflammation response. Together, these properties make DFO a potential bioactive molecule to promote wound healing and enhance tissue integration of biomaterials in vivo. Impact Statement Deferoxamine (DFO) is approved by the Food and Drug Administration as an iron chelator and is been used to treat iron overload. Recent studies indicate that DFO may have important applications in the growing field of tissue regeneration because of its unique properties of downregulating inflammation while promoting vascularization, thereby enhancing wound healing in vivo.

Enzyme Pretreatment plus Locally Delivered HB-IGF-1 Stimulate Integrative Cartilage Repair In Vitro.

A critical attribute for the long-term success of cartilage defect repair is the strong integration between the repair tissue and the surrounding native tissue. Current approaches utilized by physicians fail to achieve this attribute, leading to eventual relapse of the defect. This article demonstrates the concept of a simple, clinically viable approach for enhancing tissue integration via the combination of a safe, transient enzymatic treatment with a locally delivered, retained growth factor through an in vitro hydrogel/cartilage explant model.

Bijel-templated implantable biomaterials for enhancing tissue integration and vascularization

Mitigation of the foreign body response (FBR) and successful tissue integration are essential to ensuring the longevity of implanted devices and biomaterials. The use of porous materials and coatings has been shown to have an impact, as the textured surfaces can mediate macrophage interactions with the implant and influence the FBR, and the pores can provide space for vascularization and tissue integration. In this study, we use a new class of implantable porous biomaterials templated from bicontinuous interfacially jammed emulsion gels (bijels), which offer a fully percolating, non-constricting porous network with a uniform pore diameter on the order of tens of micrometers, and surfaces with consistent curvature. We demonstrate that these unique morphological features, inherent to bijel-templated materials (BTMs), can enhance tissue integration and vascularization, and reduce the FBR. Cylindrical polyethylene glycol diacrylate (PEGDA) BTMs, along with PEGDA particle-templated materials (PTMs), and non-templated materials (NTMs), were implanted into the subcutaneous space of athymic nude mice. After 28 days, implants were retrieved and analyzed via histological techniques. Within BTMs, blood vessels of increased size and depth, changes in collagen deposition, and increased presence of pro-healing macrophages were observed compared to that of PTM and NTM implants. Bijel templating offers a new route to biomaterials that can improve the function and longevity of implantable devices. Statement of SignificanceAll implanted biomaterials are subject to the foreign body response (FBR) which can have a detrimental effect on their efficacy. Altering the surface chemistry can decrease the FBR by limiting the amount of proteins adsorbed to the implant. This effect can be enhanced by including pores in the biomaterial to allow new tissue growth as the implant becomes integrated in the body. Here, we introduce a new class of self-assembled biomaterials comprising a fully penetrating, non-constricting pore phase with hyperbolic (saddle) surfaces for enhanced tissue integration. These unique morphological characteristics result in dense blood vessel formation and favorable tissue response properties demonstrated in a four-week implantation study.

In Vitro Performance of Bioinspired Phenolic Nanocoatings for Endosseous Implant Applications.

In the quest for finding new strategies to enhance tissue integration and to reduce the risk of bacterial colonization around endosseous implants, we report the application of auto-oxidative phenolic coatings made of tannic acid and pyrogallol to titanium surfaces. The functionalized surfaces were screened for their biological performance using cultures of primary human osteoblasts and biofilm-forming bioluminescent staphylococci S. epidermidis Xen43 and S. aureus Xen29. No toxic effect of the coatings on osteoblasts was detected. While tannic acid coatings seemed to induce a delay in osteoblast maturation, they revealed anti-inflammatory potential. Similar effects were observed for pyrogallol coatings deposited for 24 h. Thin pyrogallol coatings deposited for 2 h seemed to promote osteoblast maturation and revealed increased calcium deposition. The effects on osteoblast were found to be related to the release of phenolic compounds from the surfaces. While the phenolic coatings could not inhibit staphylococcal biofilm formation on the titanium surfaces, released phenolic compounds had an inhibitory effect the growth of planktonic bacteria. In conclusion, the assessed coating systems represent a versatile functionalization method which exhibit promising effects for endosseous implant applications.