Thermal Conductivity Enhancement Research Articles

Effect of temperature and nanoparticle size on the interfacial layer thickness of TiO2–water nanofluids using molecular dynamics

Abstract In the design and optimization of nanofluids, it is crucial to investigate and characterize the thermal conductivity enhancement mechanisms and their influencing factors. Although the effect of the “liquid film” on the thermal conductivity of the solid–liquid interface in nanofluids has been extensively studied, most of the research in this area has examined metal–water nanofluids or Ar-based nanofluids. In this work, non-equilibrium molecular dynamics is utilized to explore the mechanism of thermal conductivity enhancement in TiO2–water nanofluids. It is noted that a distinct interfacial layer is formed within 5 Å from the nanoparticle surface. As the nanoparticle size increases, the number density also increases, resulting in a corresponding increase in the thermal conductivity. Moreover, adding 1% TiO2 nanoparticles to water leads to an increase in thermal conductivity of 1.5–3%. Notably, the interfacial layer thickness remains relatively constant with the change in temperature. The Materials Studio analysis results indicated that the water molecule will have stable chemisorption on the titanium dioxide surface with an adsorption energy of approximately −0.96 eV. The findings of this study offer new insights and useful information to support the selection of nanomaterials for the preparation of convective systems.

Enhanced thermal performance of phase change mortar using multi-scale carbon-based materials

Incorporating phase change material (PCM) into construction materials is an effective method for modifying building energy regulations throughout their service life. However, the effectiveness of PCM is constrained by its low thermal conductivity, highlighting the need for efficient enhancement methods. This study introduces thermally conductive carbon-based additions at both the nano-scale and meso-scale with different shapes, including carbon nano-tube (CNT), carbon black nano-particle (CB), and carbon fibre (CF) in PCM mortar. The mixed hydrated inorganic salt serves as the core PCM, while expanded perlite acts as the supporting material for the stable PCM composite, based on the presented research. The multi-scale additions establish thermal conduction pathways that improve temperature regulation performance. The modified samples exhibited a temperature difference of 2.2 °C and a time lag of up to 20 min under natural cooling conditions. Notably, CB positively influenced thermal conductivity, while CNT demonstrated an unexpected minor reduction. The enhancement in thermal conductivity increased with the content of CB, reaching an optimal enhancement of 18 %, except at a CNT content of 0.5 %. Conversely, both CB and CNT consistently improved thermal diffusivity. Furthermore, the compressive strength of the modified samples was significantly enhanced by up to 24 % compared to PCM mortar without carbon modifications. The modification method proposed in this study significantly improves both the thermal and mechanical properties of PCM mortar.

Remarkable enhancement of thermal conductivity induced by coordination transition in SiO2 thin films

Remarkable enhancement of thermal conductivity induced by coordination transition in SiO2 thin films

Enhanced Thermal Conductivity in Poly(ether imide)-Based Composites via Constructing Microscopic Segregated Networks with Ag-Bridged Graphite Nanoplatelets

Enhanced Thermal Conductivity in Poly(ether imide)-Based Composites via Constructing Microscopic Segregated Networks with Ag-Bridged Graphite Nanoplatelets

Self-assembled nest-like BN skeletons enable polymer composites with high thermal management capacity

The lagging development of thermally conductive but electrically insulating materials has become a bottleneck problem for the next generation of advanced high-power density electronic devices. Although second-phase reinforced composites are promising materials for addressing thermal management issues, the inherent mechanism of severe phonon scattering at the interphase results in actual thermal conductivity enhancement efficiency far below expectations. Here, we report a high-performance polymer composite with a nest-like interconnected boron nitride skeleton. This nest-like interconnected BN skeleton without mechanical contact can provide high-efficiency and long-distance phonon transport channel, realizing high thermal conductivity of 1.827 W m-1 K-1 in polymer composite with ultra-low content (4.7 vol%). Meanwhile, the EP/ nest-like BS composites possess ideal electrical properties and dimensional stability. In the actual heat dissipation process of LED chips, the optimal composite material as the thermal interface material can display a temperature drop of more than 34.8% compared to neat epoxy, which proves the broad application prospects of this strategy in advanced electronic devices.

Achieving Enhanced Thermal Conductivity and Low Dielectric Constants Using Double-Oriented Fluorinated Graphene Skeleton in Silicone Gel Composites

Achieving Enhanced Thermal Conductivity and Low Dielectric Constants Using Double-Oriented Fluorinated Graphene Skeleton in Silicone Gel Composites

Dependence of Thermal Conductivity on Size and Specific Surface Area for Different Based CoFe2O4 Cluster Nanofluids

Enhancing the thermal conductivity of fluids by using nanoparticles with outstanding thermophysical properties has acquired significant attention for heat-transfer applications. Nanofluids have the potential to optimize energy systems by improving heat-transfer efficiency. In this study, cobalt ferrite nanoparticles clusters with controlled mean sizes ranging from 97 to 192 nm were synthesized using a solvothermal method to develop novel nanofluids with enhanced thermal conductivity. These clusters were comprehensively characterized using transmission electron microscopy, X-ray diffraction, Raman spectroscopy, vibrating-sample magnetometry, and nitrogen physisorption. The CoFe2O4 cluster nanofluids were prepared using the two-step method with various base fluids (water, propylene glycol, and a mixture of both). Dynamic light scattering analyses of the average Z-size of the dispersed nanoadditives over time revealed that the stability of the dispersions is influenced by cluster size and the proportion of glycol in the base fluid. The thermal conductivity of the base fluid and nine different 0.5 wt% CoFe2O4 cluster nanofluids was measured using the transient hot wire method at temperatures of 293.15, 303.15, and 313.15 K, showing different temperature dependencies. The study also explores the relationships between the thermal conductivity, cluster size, and specific surface area of the nanoadditives. A maximum thermal conductivity enhancement of 4.2% was reported for the 0.5 wt% nanofluid based on propylene glycol containing 97 nm CoFe2O4 clusters. The findings suggest that the specific surface area of nanostructures is a more relevant parameter than size for describing improvements in thermal conductivity.

Influence of functionalized and non-functionalized 2D graphene nanomaterial with organic phase change materials: Thermal performance comparison

Thermal energy storage and harvesting using phase change materials (PCMs) is a crucial aspect of solar thermal utilisation and energy management. However, the intrinsic limitations associated with PCMs, such as their relatively lower thermal conductivity and sluggish thermal transport pose significant obstacles in the advancement of thermal energy harvesting and storage systems reliant on PCMs. Research explored by inclusion of nanomaterial with the PCM matrix is predominant depending on uniform diffusion and stability of the developed nanocomposite. In this research endeavour, we introduce a novel and synergistic approach to synthesis a functionalized graphene nanomaterials and compare its performance with non-functionalized graphene nanomaterial at various concentrations within organic PCMs, operating at a phase change temperature of 54 °C. The formulated nanocomposite’s thermophysical properties morphology, chemical stability, optical absorbance & transmittance, melting enthalpy, thermal stability and thermal reliability were investigated using sensitive instruments. The findings unveil a remarkable enhancement in thermal conductivity with functionalized graphene dispersed PCM exhibiting an astonishing surge of 106.7 % at a mere 0.8 wt% loading, when contrasted with conventional PCM. The optical transmittance of RT54-0.8fGr was significantly reduced from 56 % to 17.2 %, which enabled the effectiveness for solar thermal energy harnessing; meanwhile the melting enthalpy was energised to 193.4 J/g from 182.6 J/g. The developed nanocomposite with better optical property and melting enthalpy were tested for 500 numbers of accelerated thermal cycles and its chemical stability and thermal property were compared with PCM. Furthermore, a heat transfer analysis is numerically simulated to exhibit the thermal conductance performance of functionalized nanocomposite PCM over base PCM. The findings suggest that the functionalized graphene dispersed PCM matrix to exhibit highly favourable attributes for renewable thermal energy storage due to their exceptional comprehensive features.

Evaluating the energy and economic performance of hybrid photovoltaic thermal system integrated with multiwalled carbon nanotubes enhanced phase change material

Photovoltaic thermal (PVT) systems represent an advanced evolution of traditional photovoltaic (PV) modules designed to generate electrical and thermal energy simultaneously. However, achieving optimal and commercially viable performance from these systems remains challenging. To overcome this issue, in this research, multiwalled carbon nanotube (MWCNT) enhanced phase change materials (PCMs) integrated with PVT system to enhance electrical and thermal performance has been studied. An experimental investigation with three different configurations, PVT, PCM integrated PVT (PVTPCM), and MWCNT enhanced PCM integrated PVT (PVTNePCM) systems, was carried out under varying solar radiations and a water flow rate of 0.013–0.016 kg/s compared to conventional PV system. A two-step technique was employed to formulate the nanocomposites, and the energy performance of both PV and PVT systems assessed experimentally. The performance of PVTPCM and PVTNePCM systems was evaluated using the TRNSYS simulation technique. The formulated nanocomposite exhibited a 71.43% enhancement in thermal conductivity, a significant reduction in transmittance up to 92% and remained chemically and thermally stable. Integration of NePCM in the PVT system resulted in a notable decrease in panel temperature and a 25.03% increase in electrical efficiency compared to the conventional PV system. The highest performance ratio and overall efficiency for PVTNePCM were 0.55 and 81.62%, respectively, at a flow rate of 0.013 kg/s. The energy payback periods of PVTNePCM, PVTPCM, and PVT setup were 4.7, 4.8 and 5.6 years, respectively. Additionally, a significant improvement in thermal efficiency were observed for PVTPCM and PVTNePCM systems compared to water-based PVT systems, due to the energy stored in the thermal energy storage material.

Simultaneously Enhanced Thermal Conductivity and Dielectric Breakdown Strength in Micro/Nano-BN/Epoxy/PC Multilayer Composites

Simultaneously Enhanced Thermal Conductivity and Dielectric Breakdown Strength in Micro/Nano-BN/Epoxy/PC Multilayer Composites

Transferable Percolated Particle Monolayers Derived from Marangoni Flows for Thermally Conductive Dielectric Coatings.

Thermal management is becoming one of the most significant design and size limitations for high power density electronics, including motherboards, power converters, and phased array antennas for 5G communications. There are few options for conducting heat away with dielectric materials that avoid shortening or distorting the performance of these electronics. Certain highly thermally conductive 2D and 3D materials, including hexagonal boron nitride and diamond, offer ideal material properties to address these issues but are extremely challenging to process. This work studies highly oriented single-particle thick films of hexagonal boron nitride, manufactured through a modified Langmuir-Blodgett process and densified further using the Marangoni effect to attain remarkable thermal conductivity enhancement with minimal coating thickness. High loadings of hexagonal boron nitride (∼60 vol %) in dense, castable films are also produced to compare thermal spreading ability in a comparatively simpler but less-coordinated percolated system to the highly percolated particle monolayers. These procedures were applied to glass fiber reinforced polymers used in aerospace and radome applications as well as to a single-board computer to demonstrate enhanced thermal management.

Enhancing thermal stability and electrical conductivity performance of silica aerogel via graphene oxide integration

Enhancing thermal stability and electrical conductivity performance of silica aerogel via graphene oxide integration

An experimental and comparative study on passive and active PCM cooling of a battery with/out copper mesh and investigation of PCM mixtures

The carbon emission contribution to global warming accelerated both research on and transition to electric vehicles (EVs). Drivers demand high power, fast acceleration and less charging times. All these demands require high C rate charging/discharging demands from batteries. The rate of heat generation is exponentially proportional to C rates which decreases battery lifetime and may lead to thermal runaway. However, a battery thermal management system decreases thermal runaway risk and decelerates battery degradation via controlling battery temperature. In this paper, we first document the thermal conductivity enhancement via copper foam into phase change material (PCM) domain to uncover their possible use in EV thermal management applications. Maximum 15.93 times increment is achieved with a specific copper foam. Then, physical properties and behaviors of distinct PCM mixtures are documented. Homogeneity of mixtures is associated with the chemistry of PCMs and the mixture melting point is proportional to the volume weighted average of melting temperatures. The results document that the PCM with relatively lower melting point is beneficial when end of discharge temperatures considered, except for high discharge rate of 2C. Temperature uniformity across the battery increases with relatively higher melting point PCM. Experiments also document that the amount of PCM volume lost via insertion of copper foam yields higher end of discharge temperatures. Overall, both PCM and copper foam enhances temperature homogeneity and their benefit becomes more sensible during drive cycles relative to continuous charge/discharge use cases.

Influence of casting-warm pressing process on the thermal conductivity of micro–nano-Al2O3 substrate

Alumina substrates are increasingly used for high-power integrated circuits due to their high thermal conductivity, low thermal expansion coefficient, and excellent insulation properties. However, pores in the green tape from the tape casting process reduce the thermal conductivity and permittivity of the sintered ceramic substrate. Researchers have attempted to minimize ceramic porosity with chemical additives or by sintering pure alumina at temperatures above 1650 °C, but these methods often degrade thermal conductivity or quality of substrate evenness. This study proposes a low-cost casting-warm pressing process to densify pure alumina ceramic substrates using micro–nano-mixed alumina powders and sintering at relatively low temperatures. The results indicate that the relative density of the pure alumina ceramic substrate prepared at 1500 °C is 93%, a 4.4% improvement over the tape casting process. Additionally, the thermal conductivity of the alumina substrate from the casting-warm pressing process reaches 15.89 W/(m K), which is 1.4 times higher than that of the tape casting process. Microstructure analysis shows that the casting-warm pressing process with micro- and nano-multi-scale mixed alumina powders forms a novel thermal conduction enhancement mechanism. Large particles in the green tape overlap, while small particles fill the spaces between the large particles. The connected micrometer-sized particle skeletons form high thermal conduction net channels in the substrate, improving the thermal conductivity for heat transfer.

Enhanced Thermal Conductivity and Stability of Hydrated Salt Phase Change Microcapsules With GO/SiO2 Hybrid Shell for Battery Thermal Management

AbstractHerein, the synthesis of a novel microencapsulated phase change material via a sol–gel method is presented, featuring disodium hydrogen phosphate dodecahydrate as the core and a SiO2/graphene oxide composite as the shell. The morphology and core–shell microstructure of the synthesized microcapsules are characterized using scanning electron microscopy. The phase change performance and thermal stability are evaluated by differential scanning calorimetry and a high/low temperature test chamber, respectively. Energy dispersive X‐ray spectroscopy and Fourier transform infrared spectroscopy are employed to determine the chemical composition of the microcapsules. The findings reveal that the MEPCM exhibited a high melting enthalpy of 174.3 J g−1. The degree of supercooling is reduced by 2.1 °C, and after 600 thermal cycles, the phase change enthalpy of the microcapsules showed a minor decrease of ≈6.0%. Notably, the thermal conductivity of the microcapsules is significantly enhanced, increasing by up to 51.8%. When integrated into the thermal management systems of lithium‐ion batteries, the MEPCM effectively maintained the battery temperature below 46 °C under a 3 C charging rate. In summary, these results suggest that the hydrated salt microcapsule with its hybrid silica and graphene oxide shell is a promising material for the thermal management of lithium‐ion batteries.

Construction of Vertically Interconnected Microdiamond Channels Inspired by Subcutis for Thermal Conductivity Enhancement of Polymer Composite Films

Construction of Vertically Interconnected Microdiamond Channels Inspired by Subcutis for Thermal Conductivity Enhancement of Polymer Composite Films

Corrosion-Resistant Polymer Composite Tubes with Enhanced Thermal Conductivity for Heat Exchangers

The heat transfer surfaces of heat exchangers are usually made of metals which may suffer from severe corrosion. When corrosive fluids are present, highly corrosion-resistant metals, graphite or ceramics are used, resulting in high costs. This study presents measured data on the thermophysical and mechanical properties of recently developed corrosion-resistant polymer composite tubes for use in heat exchangers. Extruded polymer composite tubes based on polypropylene or polyphenylene sulfide filled with graphite flakes were investigated. The anisotropic thermal conductivities of the polymer composite tubes were measured at various temperatures. The through-wall thermal conductivity of the tubes made of polypropylene filled with 50 vol.% graphite is increased by a factor of 30 compared to pure polypropylene, resulting in a thermal conductivity of 6.5 W/(m K) at 25 °C. The tubes composed of polyphenylene sulfide filled with 50 vol.% graphite have a through-wall thermal conductivity of 4.5 W/(m K) at 25 °C. The mechanical properties of the polymer composites were measured using tensile and flexural tests at different temperatures. The composite materials are more rigid and keep their mechanical properties up to a higher temperature level compared to the unfilled polymers. Surface roughness measurements show the very smooth and sealed surface of the composite tubes. The results contribute to establishing the viability of using polymer composites for heat exchanger applications with corrosive fluids.

Bio-Inspired Thermal Conductive Fibers by Boron Nitride Nanosheet/Boron Nitride Hybrid.

With the innovation of modern electronics, heat dissipation in the devices faces several problems. In our work, boron nitride (BN) with good thermal conductivity (TC) was successfully fabricated by constructing the BN along the axial direction and the surface-grafted BN hybrid composite fibers via the wet-spinning and hot-pressing method. The unique inter-outer and inter-interconnected hybrid structure of composite fibers exhibited 176.47% thermal conductivity enhancement (TCE), which exhibits good TC, mechanical resistance, and chemical resistance. In addition, depending on the special structure of the composite fibers, it provides a new strategy for fabricating thermal interface materials in the electronic device.

Thermal Conductivity Enhancement of Doped Magnesium Hydroxide for Medium-Temperature Heat Storage: A Molecular Dynamics Approach and Experimental Validation.

Magnesium hydroxide, Mg(OH)2, is recognized as a promising material for medium-temperature heat storage, but its low thermal conductivity limits its full potential application. In this study, thermal enhancement of a developed magnesium hydroxide-potassium nitrate (Mg(OH)2-KNO3) material was carried out with aluminum oxide (Al2O3) nanomaterials. The theoretical results obtained through a molecular dynamics (MD) simulation approach showed an enhancement of about 12.9% in thermal conductivity with an optimal 15 wt% of Al2O3. There was also close agreement with the experimental results within an error of ≤10%, thus confirming the reliability of the theoretical approach and the potential of the developed Mg(OH)2-KNO3 as a medium heat storage material. Further investigation is, however, encouraged to establish the long-term recyclability of the material towards achieving a more efficient energy storage process.

Thermal Interface Materials with High Adhesion and Enhanced Thermal Conductivity via Optimization of Polydimethylsiloxane Networks and Aluminum Fillers

Thermal Interface Materials with High Adhesion and Enhanced Thermal Conductivity via Optimization of Polydimethylsiloxane Networks and Aluminum Fillers