Release Of Engineered Nanomaterials Research Articles

95 Local Scale Exposure and Fate of Engineered Nanomaterials

Abstract Nanotechnology is a growing megatrend in industrial production and innovations. Many applications utilize engineered nanomaterials (ENMs) that are potentially released into the atmospheric environment, e.g., via direct stack emissions from production facilities, and may have adverse effects on human health and the environment. Previous modeling approaches have focused on large regional compartments, into which the released ENMs are evenly mixed. However, due to the localization of the ENM release and removal processes, potentially higher airborne concentrations and deposition fluxes are obtained around the production facilities. Therefore, we compare the ENM concentrations from a dispersion model to those from the uniformly mixed compartment approach. For realistic release scenarios, we based the modeling on the case study measurement data from two ENM handling facilities. In addition, we calculated the distances, at which 50% of the ENMs are deposited, serving as a physically relevant metric to separate the local scale from the regional scale, thus indicating the size of the high exposure and risk region near the facility. As a result, we suggest a local scale compartment to be implemented in the multicompartment nanomaterial exposure models. We also present a computational tool for local exposure assessment that could be included to regulatory guidance and existing risk governance networks. A related research article is currently under peer-review (Poikkimäki et al. 2022, submitted).

Local Scale Exposure and Fate of Engineered Nanomaterials.

Nanotechnology is a growing megatrend in industrial production and innovations. Many applications utilize engineered nanomaterials (ENMs) that are potentially released into the atmospheric environment, e.g., via direct stack emissions from production facilities. Limited information exists on adverse effects such ENM releases may have on human health and the environment. Previous exposure modeling approaches have focused on large regional compartments, into which the released ENMs are evenly mixed. However, due to the localization of the ENM release and removal processes, potentially higher airborne concentrations and deposition fluxes are obtained around the production facilities. Therefore, we compare the ENM concentrations from a dispersion model to those from the uniformly mixed compartment approach. For realistic release scenarios, we based the modeling on the case study measurement data from two TiO nanomaterial handling facilities. In addition, we calculated the distances, at which 50% of the ENMs are deposited, serving as a physically relevant metric to separate the local scale from the regional scale, thus indicating the size of the high exposure and risk region near the facility. As a result, we suggest a local scale compartment to be implemented in the multicompartment nanomaterial exposure models. We also present a computational tool for local exposure assessment that could be included to regulatory guidance and existing risk governance networks.

An EPA database on the effects of engineered nanomaterials-NaKnowBase

The US EPA Office of Research and Development (ORD) has conducted a research program assessing potential risks of emerging materials and technologies, including engineered nanomaterials (ENM). As a component of that program, a nanomaterial knowledge base, termed “NaKnowBase”, was developed containing the results of published ORD research relevant to the potential environmental and biological actions of ENM. The experimental data address issues such as ENM release into the environment; fate, transport and transformations in environmental media; exposure to ecological species or humans; and the potential for effects on those species. The database captures information on the physicochemical properties of ENM tested, assays performed and their parameters, and the results obtained. NaKnowBase (NKB) is a relational SQL database, and may be queried either with SQL code or through a user-friendly web interface. Filtered results may be output in spreadsheet format for subsequent user-defined analyses. Potential uses of the data might include input to quantitative structure-activity relationships (QSAR), meta-analyses, or other investigative approaches.

Assessment of Nanopollution from Commercial Products in Water Environments.

The use of nano-enabled products (NEPs) can release engineered nanomaterials (ENMs) into water resources, and the increasing commercialisation of NEPs raises the environmental exposure potential. The current study investigated the release of ENMs and their characteristics from six commercial products (sunscreens, body creams, sanitiser, and socks) containing nTiO2, nAg, and nZnO. ENMs were released in aqueous media from all investigated NEPs and were associated with ions (Ag+ and Zn2+) and coating agents (Si and Al). NEPs generally released elongated (7–9 × 66–70 nm) and angular (21–80 × 25–79 nm) nTiO2, near-spherical (12–49 nm) and angular nAg (21–76 × 29–77 nm), and angular nZnO (32–36 × 32–40 nm). NEPs released varying ENMs’ total concentrations (ca 0.4–95%) of total Ti, Ag, Ag+, Zn, and Zn2+ relative to the initial amount of ENMs added in NEPs, influenced by the nature of the product and recipient water quality. The findings confirmed the use of the examined NEPs as sources of nanopollution in water resources, and the physicochemical properties of the nanopollutants were determined. Exposure assessment data from real-life sources are highly valuable for enriching the robust environmental risk assessment of nanotechnology.

Exposure and Possible Risks of Engineered Nanomaterials in the Environment—Current Knowledge and Directions for the Future

AbstractThe consequences that engineered nanomaterials (ENMs) may cause in the environment have been under investigation for more than 15 years. Hundreds of millions of euros/dollars have been invested into safety issues of ENMs, and much progress has been made in the understanding of their fate and effects in the environment. After an initial phase of “observing the effects,” research has shifted toward elucidating the mechanisms of fate and ecotoxicological effects. This also included a stronger focus on exposure issues and the development of analytical methods and computational models to predict exposure. First environmental risk assessments for ENM were performed, and much progress has been achieved on the way to nanospecific and material‐specific assessments. The release of ENM from products and their transformation in technical and natural compartments profoundly affect the form in which the ENMs are present in the environment. A crucial aspect in all areas isifthere are truly nanospecific issues of the novel‐added functionalities of ENM that are different from dissolved metals, larger particles, or natural particles. This review outlines progress in understanding the environmental dimensions of ENMs and areas that merit further investigation: To what extent are ENMs different from their natural counterparts and how “long” do we need to track them in natural and technical systems? A major challenge will be in developing methods for studying particle‐mediated processes and their effects on ecosystems and organisms in a more general sense, going beyond just ENM, for example, to natural nanoparticles, microplastics, and extracellular vesicles.

Fragmentation of polymer nanocomposites: modulation by dry and wet weathering, fractionation, and nanomaterial filler.

In recent years, an increasing number of polymeric composites incorporating engineered nanomaterials (ENMs) have reached the market. Such nano-enabled products (NEPs) present enhanced performance through improved mechanical, thermal, UV protection, electrical, and gas barrier properties. However, little is known about how environmental weathering impacts ENM release, especially for high-tonnage NEPs like kaolin products, which have not been extensively examined by the scientific community. Here we study the simulated environmental weathering of different polymeric nanocomposites (epoxy, polyamide, polypropylene) filled with organic (multiwalled carbon nanotube, graphene, carbon black) and inorganic (WS2, SiO2, kaolin, Fe2O3, Cu-phthalocyanines) ENMs. Multiple techniques were employed by researchers at three laboratories to extensively evaluate the effect of weathering: ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), optical microscopy, contact angle measurements, gravimetric analysis, analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman spectroscopy. This work aimed to elucidate the extent to which weathering protocol (i.e. wet vs. dry) and diverse filler characteristics modulate fragment release and polymer matrix degradation. In doing so, it expanded the established NanoRelease protocol, previously used for analyzing fragment emission, by evaluating two significant additions: (1) simulated weathering with rain events and (2) fractionation of sample leachate prior to analysis. Comparing different composite materials and protocols demonstrated that the polymer matrix is the most significant factor in NEP aging. Wet weathering is more realistic than dry weathering, but dry weathering seems to provide a more controlled release of material over wet. Wet weathering studies could be complicated by leaching, and the addition of a fractionation step can improve the quality of UV-vis measurements.

Evolution of particle interactions between accidentally released aerosol particles generated from powdered engineered nanomaterials into a simulated workplace atmosphere

The evaluation of aerosol processes which alter the size distribution of accidentally released nanomaterial particles in an indoor environment can provide size resolved exposure estimations, and subsequently contribute to a more comprehensive risk analysis on engineered nanomaterials (ENMs). In this work processed suspensions of TiO2 and SiO2 nanopowders were introduced into the reservoir of a nebuliser, and injected continuously as nano-aerosols into a room-size dispersion facility for a fixed release time. Following injection, the concentration of the dispersed aerosols was allowed to naturally decay for a prolonged period. Airborne particle number concentration (PNC) and particle size distributions (PSD) were continuously measured at a point within the breathing zone near to the source, while deposited particles were collected for transmission electron microscopy (TEM) analysis. A log10-normal fitting program was used to determine the evolution of the modal groups present within the measured PSDs. A modelling approach that considered the experimentally determined particle decay rate as a sum of the pair to pair coagulation and deposition rates was employed to estimate the relative importance of size-resolved deposition compared to coagulation. Results indicated that the variation of PNC with time was accurately modelled, providing size-dependent insights into the contribution of the two particle removal mechanisms to the change of PNC over time. The deposition patterns obtained from the TEM images qualitatively supported the model results. Since a limited set of input parameters were used, we concluded that the proposed model could be an effective tool for a reasonable quantification of worker's exposure to aerosols originating from the accidental release of diffuse ENM in real workplaces.

Toward a better extraction of titanium dioxide engineered nanomaterials from complex environmental matrices

Detection, characterization, and quantification of engineered nanomaterials (ENMs) in aquatic systems is a topic of high interest because ENMs are being released increasingly into the environment. In the natural environment, ENMs form heteroaggregates with natural particles which complicates their characterization and quantification. This study investigates the influence of sodium pyrophosphate (NaPP) and sodium oxalate (NaOx) on TiO2 ENM stability in the presence of montmorillonite, natural organic matter (Suwannee River humic acids, SRHA), and CaCl2 with the aim to propose a fundamental protocol for the extraction of ENMs from natural waters. NaPP, not only prevents aggregation, but also rapidly induces TiO2 ENM disaggregation and release from TiO2-clay heteroaggregates -previously formed in presence of CaCl2 and SRHA- in the form of individual particles, or small aggregates. The recovery of TiO2 ENMs in a montmorillonite dispersion in presence of SRHA and CaCl2 was >90% for the <100 nm size fraction, independent of the CaCl2 concentration. In contrast, without NaPP treatment, no TiO2 ENMs smaller than 100 nm were recovered in presence of divalent cations without SRHA, and <15% TiO2 ENMs were recovered in the <100 nm fraction in the presence of divalent cations and SRHA. NaOx did not affect the stability of TiO2 ENMs in the absence of electrolytes and did not stabilize TiO2 ENMs in presence of divalent electrolyte. These findings provide a proof-of-concept for the application of NaPP for the extraction of TiO2 ENMs, and potentially other ENMs, from ENM-natural particle heteroaggregates. Release of ENMs in the form of individual particles, or small aggregates is essential to facilitate ENM characterization and quantification in complex environmental media.

A Systematic Review of the Routes and Forms of Exposure to Engineered Nanomaterials.

Establishing the routes of exposure is a fundamental component of the risk assessment process for every dangerous substance. The present study systematically reviews the available literature to assess the relevance of the different routes and forms of exposure that are of concern for the protection of workers during the manufacture, handling, or end-use of engineered nanomaterials (ENMs). A systematic review of the peer-reviewed literature published between 2000 and 2015 was completed. Only studies including measurements of inhalation or dermal exposure were selected and used to identify the exposure situations for which the measurements were collected. The identified exposure situations were grouped based on the type of ENM (i.e. carbon nanotubes and fibres, silicon-based, titanium dioxide, other metal oxides, pure elemental metals, and other ENMs) and activity involved. The grouped exposure situations were assessed to provide a conclusion regarding the likelihood, form, and route of exposure. Assessment of the likelihood of exposure was based on well-defined criteria using a previously established decision logic for inhalation exposure and the outputs from measurements and/or conceptual models for dermal/ingestion exposure. For each combination of nano-activity and type of ENM, the aggregated likelihood across all relevant individual assessments was used to draw conclusions about the relevance of both the inhalation and dermal/ingestion routes. Based on the quality of the data, the strength of the evidence was also evaluated. One hundred and seven studies were identified during the review process, reporting 424 individual exposure assessments. Measurement data were limited for dermal/ingestion exposure and for inhalation exposure for downstream use and end-of-life. However, the data provided high-quality evidence that in occupational settings all three routes can be of relevance for exposure to ENMs. In general, whenever inhalation exposure occurs then dermal and inadvertent ingestion exposure may occur due to surface deposition and transfer due to the ENMs release. However, for some forms of exposure (e.g. suspension/liquids), dermal exposure can occur even when inhalation exposure is unlikely. An increased likelihood of exposure was observed for manual activities such as cleaning and maintenance, collection/harvesting, spraying, and finishing as well as those involving feeding into a process and handling of powders outside enclosures. The likelihood of exposure was affected by the presence of risk management measures and the scale of the production involved. This literature review provides evidence that for ENMs, as found for other materials, the likelihood of the exposure depends largely on the physical form of the substance as well as the applied process and operational conditions. These results can be used to provide first indications of the likelihood of exposure and guidance for exposure controls in workplaces. However, there is a clear lack of high-quality exposure data, in particular for downstream use and end-of-life scenarios and in low- and medium-income countries.

Environmental risk assessment of engineered nano-SiO2 , nano iron oxides, nano-CeO2 , nano-Al2 O3 , and quantum dots.

Many research studies have endeavored to investigate the ecotoxicological hazards of engineered nanomaterials (ENMs). However, little is known regarding the actual environmental risks of ENMs, combining both hazard and exposure data. The aim of the present study was to quantify the environmental risks for nano-Al2 O3 , nano-SiO2 , nano iron oxides, nano-CeO2 , and quantum dots by comparing the predicted environmental concentrations (PECs) with the predicted-no-effect concentrations (PNECs). The PEC values of these 5 ENMs in freshwaters in 2020 for northern Europe and southeastern Europe were taken from a published dynamic probabilistic material flow analysis model. The PNEC values were calculated using probabilistic species sensitivity distribution (SSD). The order of the PNEC values was quantum dots < nano-CeO2 < nano iron oxides < nano-Al2 O3 < nano-SiO2 . The risks posed by these 5 ENMs were demonstrated to be in the reverse order: nano-Al2 O3 > nano-SiO2 > nano iron oxides > nano-CeO2 > quantum dots. However, all risk characterization values are 4 to 8 orders of magnitude lower than 1, and no risk was therefore predicted for any of the investigated ENMs at the estimated release level in 2020. Compared to static models, the dynamic material flow model allowed us to use PEC values based on a more complex parameterization, considering a dynamic input over time and time-dependent release of ENMs. The probabilistic SSD approach makes it possible to include all available data to estimate hazards of ENMs by considering the whole range of variability between studies and material types. The risk-assessment approach is therefore able to handle the uncertainty and variability associated with the collected data. The results of the present study provide a scientific foundation for risk-based regulatory decisions of the investigated ENMs. Environ Toxicol Chem 2018;37:1387-1395. © 2018 SETAC.

Methodological studies for quantifying airborne release of nano- and nano-enabled materials using a fast mobility particle sizer

The same unique properties of engineered nanomaterials (ENMs) that make them desirable for new product applications may also increase their environmental health and safety (EHS) uncertainty, leading to high risk prioritization under the reformed Toxic Substances Control Act and potential delays in commercial production. Quantifying the risk of these materials requires additional knowledge about the release of ENMs from the product during the material's life cycle; however, release testing processes remain one of the lesser studied sources of uncertainty for the risk assessment of ENM-enabled products. In this paper, we show development of a novel calibration method to quantify released ENMs using nano-TiO2 and carbon nanotubes (CNT) via a fast mobility particle sizer (FMPS). We also demonstrate the real-world applicability of our method by analyzing the results of ENM release from an aluminum rod doped with nano silicon carbide (SiC) ENMs and a TiO2-cement composite (TCC). This analysis is the first of its kind, and provides an incremental improvement to resolve inherent uncertainty in risk assessment and EHS impacts of ENMs and other advanced materials, particularly in regard to providing some level of confidence in cases where no (or low amounts of) material is released.

Dynamic probabilistic material flow analysis of nano-SiO2, nano iron oxides, nano-CeO2, nano-Al2O3, and quantum dots in seven European regions.

Static environmental exposure assessment models based on material flow analysis (MFA) have previously been used to estimate flows of engineered nanomaterials (ENMs) to the environment. However, such models do not account for changes in the system behavior over time. Dynamic MFA used in this study includes the time-dependent development of the modelling system by considering accumulation of ENMs in stocks and the environment, and the dynamic release of ENMs from nano-products. In addition, this study also included regional variations in population, waste management systems, and environmental compartments, which subsequently influence the environmental release and concentrations of ENMs. We have estimated the flows and release concentrations of nano-SiO2, nano-iron oxides, nano-CeO2, nano-Al2O3, and quantum dots in the EU and six geographical sub-regions in Europe (Central Europe, Northern Europe, Southern Europe, Eastern Europe, South-eastern Europe, and Switzerland). The model predicts that a large amount of ENMs are accumulated in stocks (not considering further transformation). For example, in the EU 2040 Mt of nano-SiO2 are stored in the in-use stock, 80,400 tonnes have been accumulated in sediments and 65,600 tonnes in natural and urban soil from 1990 to 2014. The magnitude of flows in waste management processes in different regions varies because of differences in waste handling. For example, concentrations in landfilled waste are lowest in South-eastern Europe due to dilution by the high amount of landfilled waste in the region. The flows predicted in this work can serve as improved input data for mechanistic environmental fate models and risk assessment studies compared to previous estimates using static models.

Modeling the fate and end-of-life phase of engineered nanomaterials in the Japanese construction sector

To date construction materials that contain engineered nanomaterials (ENMs) are available at the markets, but at the same time very little is known about their environmental fate. Therefore, this study aimed at modeling the potential fate of ENMs by using the example of the Japanese construction sector and by conducting a dynamic material flow analysis. Expert interviews and national reports revealed that about 3920–4660 tons of ENMs are annually used for construction materials in Japan. Nanoscale TiO2, SiO2, Al2O3 and carbon black have already been applied for decades to wall paints, road markings or concrete. The dynamic material flow model indicates that in 2016 about 95% of ENMs, which have been used since their year of market penetration, remained in buildings, whereas only 5% ended up in the Japanese waste management system or were diffusely released into the environment. Considering the current Japanese waste management system, ENMs were predicted to end up in recycled materials (40–47%) or in landfills (36–41%). It was estimated that only a small proportion was used in agriculture (5–7%, as ENM-containing sewage sludges) or was diffusely released into soils, surface waters or the atmosphere (5–19%). The results indicate that ENM release predominantly depend on their specific applications and characteristics. The model also highlights the importance of adequate collection and treatment of ENM-containing wastes. In future, similar dynamic flow models for other countries should consider, inasmuch as available, historical data on ENM production (e.g. like declaration reports that are annually published by relevant public authorities or associations), as such input data is very important regarding data reliability in order to decrease uncertainties and to continuously improve model accuracy. In addition, more environmental monitoring studies that aim at the quantification of ENM release and inadvertent transfer, particularly triggered by waste treatment processes, would be needed in order to validate such models.

Release of TiO2 – (Nano) particles from construction and demolition landfills

A large fraction of engineered nanomaterials (ENM) will be deposited in landfills and it is assumed that ENM are securely locked in landfill sites and cannot leach into the environment (e.g. surface waters). However, experimental evidence supporting this assumption is lacking, as current production volumes of ENM are still too small and/or analytical techniques not sensitive enough to allow for the detection and quantification of ENM in landfill leachates. TiO2 particles are currently used in large quantities, for example in construction materials such as paints and renders as white pigments and their sizes extend into the nano-size range. We, therefore, selected TiO2 particles as a surrogate to assess the potential release of ENM from construction and demolition (C&D) landfill sites. We collected leachate samples from a landfill over one year and used complementary analytical techniques, including inductively coupled plasma (ICP) – optical emission spectroscopy (OES), automated scanning electron microscopy (auto SEM), transmission electron microscopy (TEM) and single particle ICP - mass spectrometry (spICPMS) to quantify TiO2 particles in landfill leachates. Total elemental Ti contents were mostly around a few tens of μgL−1 and were strongly correlated with total suspended solids. Based on the volumetric discharge of the landfill leachate water from the landfill, we estimate a total amount of ~0.5kg of TiO2 particles that are released annually from the landfill. Ti concentrations derived from ICP-OES measurements were in good agreement with quantifications based on TiO2 particles detected by auto SEM analyses. spICPMS measurements indicated a number concentration of Ti-containing particles in the order of 105mL−1 and TEM analyses dominantly revealed nanoscale TiO2 particles with a spherical shape typically observed for TiO2 particles used as white pigments. In addition, angular TiO2 particles with a well-defined crystal habitus were detected, suggesting that also natural TiO2 particles of comparable sizes are present in the landfill leachates.The results from this study indicate that (nanoscale) TiO2 particles are released from C&D landfill sites (~5g/year). Although the amount of TiO2 particles released from C&D landfill sites may still be rather low, these particles may serve as proxy for assessing the future release of ENM from C&D landfill sites, which may become relevant as an increasing use of ENM is predicted for construction materials in general.

Bayesian network as a support tool for rapid query of the environmental multimedia distribution of nanomaterials.

An approach is presented describing the development of a Bayesian network (BN) based tool for rapid assessment of the distribution of engineered nanomaterials (ENMs). The methodology was demonstrated via the construction of a BN model for estimating the exposure concentrations of nanomaterials (BN-nanoExpo) based on simulation data derived from a mechanistic multimedia compartmental fate and transport model. The results of simulations of the distribution of six ENMs in eight different regions were generated for a broad range of geographical and meteorological parameters as well as ENM release rates to the air, water and soil major compartments. Test cases with the constructed BN-nanoExpo demonstrated the capability of the BN based model to portray a wide range of simulation results that can be obtained with the mechanistic fate and transport model. Moreover, BN-nanoExpo is shown to be a suitable tool for estimating both ENM concentrations and release rates given partial information, while also enabling assessment of the impact of uncertainties in input data on the predicted outcomes. The results of the current study suggest that there is merit in exploring the utility of the approach to more complex models, which would provide decision makers with powerful tools for rapid assessment of the behavior of nanomaterials in the environment.

Ecophysiological perspectives on engineered nanomaterial toxicity in fish and crustaceans

Engineered nanomaterials (ENMs) are incorporated into numerous industrial, clinical, food, and consumer products and a significant body of evidence is now available on their toxicity to aquatic organisms. Environmental ENM concentrations are difficult to quantify, but production and release estimates suggest wastewater treatment plant effluent levels ranging from 10−4 to >101μgL−1 for the most common formulations by production volume. Bioavailability and ENM toxicity are heavily influenced by water quality parameters and the physicochemical properties and resulting colloidal behaviour of the particular ENM formulation. ENMs generally induce only mild acute toxicity to most adult fish and crustaceans under environmentally relevant exposure scenarios; however, sensitivity may be considerably higher for certain species and life stages. In adult animals, aquatic ENM exposure often irritates respiratory and digestive epithelia and causes oxidative stress, which can be associated with cardiovascular dysfunction and the activation of immune responses. Direct interactions between ENMs (or their dissolution products) and proteins can also lead to ionoregulatory stress and/or developmental toxicity. Chronic and developmental toxicity have been noted for several common ENMs (e.g. TiO2, Ag), however more data is necessary to accurately characterize long term ecological risks. The bioavailability of ENMs should be limited in saline waters but toxicity has been observed in marine animals, highlighting a need for more study on possible impacts in estuarine and coastal systems. Nano-enabled advancements in industrial processes like water treatment and remediation could provide significant net benefits to the environment and will likely temper the relatively modest impacts of incidental ENM release and exposure.

Nanosilver conductive ink: A case study for evaluating the potential risk of nanotechnology under hypothetical use scenarios

Engineered nanomaterials (ENMs) are being incorporated into a variety of consumer products due to unique properties that offer a variety of advantages over bulk materials. Understanding of the nano-specific risk associated with nano-enabled technologies, however, continues to lag behind research and development, registration with regulators, and commercialization. One example of a nano-enabled technology is nanosilver ink, which can be used in commercial ink-jet printers for the development of low-cost printable electronics. This investigation utilizes a tiered EHS framework to evaluate the potential nano-specific release, exposure and hazard associated with typical use of both nanosilver ink and printed circuits. The framework guides determination of the potential for ENM release from both forms of the technology in simulated use scenarios, including spilling of the ink, aqueous release (washing) from the circuits and UV light exposure. The as-supplied ink merits nano-specific consideration based on the presence of nanoparticles and their persistence in environmentally-relevant media. The material released from the printed circuits upon aqueous exposure was characterized by a number of analysis techniques, including ultracentrifugation and single particle ICP-MS, and the results suggest that a vast majority of the material was ionic in nature and nano-specific regulatory scrutiny may be less relevant.

Airborne engineered nanomaterials in the workplace—a review of release and worker exposure during nanomaterial production and handling processes

For exposure and risk assessment in occupational settings involving engineered nanomaterials (ENMs), it is important to understand the mechanisms of release and how they are influenced by the ENM, the matrix material, and process characteristics. This review summarizes studies providing ENM release information in occupational settings, during different industrial activities and using various nanomaterials. It also assesses the contextual information — such as the amounts of materials handled, protective measures, and measurement strategies — to understand which release scenarios can result in exposure. High-energy processes such as synthesis, spraying, and machining were associated with the release of large numbers of predominantly small-sized particles. Low-energy processes, including laboratory handling, cleaning, and industrial bagging activities, usually resulted in slight or moderate releases of relatively large agglomerates. The present analysis suggests that process-based release potential can be ranked, thus helping to prioritize release assessments, which is useful for tiered exposure assessment approaches and for guiding the implementation of workplace safety strategies. The contextual information provided in the literature was often insufficient to directly link release to exposure. The studies that did allow an analysis suggested that significant worker exposure might mainly occur when engineering safeguards and personal protection strategies were not carried out as recommended.

Effects of intratracheally instilled laser printer-emitted engineered nanoparticles in a mouse model: A case study of toxicological implications from nanomaterials released during consumer use

Incorporation of engineered nanomaterials (ENMs) into toners used in laser printers has led to countless quality and performance improvements. However, the release of ENMs during printing (consumer use) has raised concerns about their potential adverse health effects. The aim of this study was to use “real world” printer-emitted particles (PEPs), rather than raw toner powder, and assess the pulmonary responses following exposure by intratracheal instillation. Nine-week old male Balb/c mice were exposed to various doses of PEPs (0.5, 2.5 and 5mg/kg body weight) by intratracheal instillation. These exposure doses are comparable to real world human inhalation exposures ranging from 13.7 to 141.9h of printing. Toxicological parameters reflecting distinct mechanisms of action were evaluated, including lung membrane integrity, inflammation and regulation of DNA methylation patterns.Results from this in vivo toxicological analysis showed that while intratracheal instillation of PEPs caused no changes in the lung membrane integrity, there was a pulmonary immune response, indicated by an elevation in neutrophil and macrophage percentage over the vehicle control and low dose PEPs groups. Additionally, exposure to PEPs upregulated expression of the Ccl5 (Rantes), Nos1 and Ucp2 genes in the murine lung tissue and modified components of the DNA methylation machinery (Dnmt3a) and expression of transposable element (TE) LINE-1 compared to the control group. These genes are involved in both the repair process from oxidative damage and the initiation of immune responses to foreign pathogens. The results are in agreement with findings from previous in vitro cellular studies and suggest that PEPs may cause immune responses in addition to modifications in gene expression in the murine lung at doses that can be comparable to real world exposure scenarios, thereby raising concerns of deleterious health effects.

Implications of Engineered Nanomaterials in Drinking Water Sources

Nanotechnology has grown rapidly over the last two decades, leading to advances in science and engineering and to releases of engineered nanomaterials (ENMs) to drinking water sources. Conventional drinking water treatment processes remove sub‐micron particles, including natural nanomaterials (e.g., viruses); however, the novel shapes, configurations, and properties of ENMs may enable their persistence. This review of the state of knowledge of ENM production and release, environmental fate and transport, detection in aquatic environments, and removal in drinking water treatment shows that detection methods and source water data are limited. In the absence of adequate methods for detecting ENMs in the environment, models have been developed and predict that ENM concentrations in surface water are likely to be very low (&lt;&lt;1 μg/L), and research of physicochemical transformations of ENMs in the environment suggests that they will be transformed into forms that are more likely to be removed during drinking water treatment.