Energy Production Methods Research Articles

Experimental and feasibility study of bio-waste valorization through pyrolysis for energy and materials production in the concept of circular economy

The pyrolysis and co-pyrolysis characteristics of large abundant bio-wastes, namely date pits (DP), peanut shells (PS), coffee grounds (CG), and tea waste (TW) were investigated in detail. The TG/DTG and pyrolysis procedures were used to examine the thermal pyrolysis behavior of these agro-wastes and their blends (50%CG/50%DP, 50%CG/50%PS, 50%DP/50%PS, 50%TW/50% DP,50%TW/50%PS and 50%CG/50% TW by weight). The characterization of these feedstock has shown their suitability for energy and material valorization. Experiments were carried out in a batch pyrolysis at a medium heating rate of 10 °C/min. The goal was to identify the best combination aiming to produce either char or hydrogen-rich gas, which can contribute to the development of the circular bio-economy. It was demonstrated that pyrolysis favored the liquid product, fluctuating from 34.31% (TW) to 50.92% (DP), while the co-pyrolysis greatly increased the gaseous product, which ranged between 42.02% (TW-DP) and 55.17% (PS-TW). The blending of CG and PS resulted in heightened reactivity, leading to an enhanced generation of H2 (34.44%). The optimal mixture was found to be CG-TW, showcasing superior performance in terms of gas quality (38.39% H2) and yield (53.74%). This outcome underscores the potential of CG and TW as a synergistic blend for efficient hydrogen-rich gas production. The FTIR findings revealed that the recovered biochars have the potential to serve as solid fuels, biofertilizers, or carbon materials. Additionally, they could be used as eco-friendly precursors for chemical and related industries. By analyzing various waste mixtures and their respective pyrolysis properties, this research aims to contribute to the development of sustainable waste management practices as well as efficient energy and material production methods.

The micro black hole cellular battery: The ultimate limits of battery energy density

With the clean energy revolution, many methods of energy production, such as solar and wind power, are quite unstable because of weather variability. However, energy consumption remains relatively stable. Therefore, efficient energy storage could be crucial for the future. In this context, we will explore the theoretical limits of battery efficiency in terms of energy density. Surprisingly, although quite speculative, a potential solution might involve a cellular battery composed of micro black holes. In fact, let us suppose hypothetically that advanced future technology can handle the formation of black holes. Then, according to the extremal solution of the Reissner–Nordström metric from general relativity, such a battery could be stable and would not collapse into a larger black hole because the electromagnetic repulsion would precisely offset the force of gravity. Additionally, although it is generally assumed that nothing can escape from a black hole, a micro black hole could possibly annihilate another micro black hole, resulting in the release of an enormous amount of clean energy. For example, a battery weighing just one kilogram could provide approximately 470 million times the energy of the most efficient 200-kilogram lithium battery at the time of writing. While achieving such a level of technological advancement is certainly not imminent, it is not inconceivable that battery technology development could follow a trajectory similar to that of computer technology. Just as breakthroughs in physics and computer engineering have led to exponential growth in computer efficiency in the last 50 years, it is possible that battery efficiency could double or even quadruple every few years following different types of breakthroughs. Nonetheless, the theoretical concept of a micro black hole battery appears to align with current predictions of fundamental physics regarding the ultimate physical limits on energy density storage. This strongly indicates we are at the very early stage of battery technology, not even close to the end.

GASIFICATION TECHNOLOGY AND ITS FUTURE: A REVIEW

Gasification technology has the potential to revolutionise the energy industry by providing a clean and efficient way to produce energy from a variety of raw materials. This technology have the ability to produce synthesis gas from raw materials based on negative or low carbon values such as high sulphur fuel oil, petroleum coke, coal, domestic wastes, industrial and biomass wastes. The gas produced from the process is used to replace natural gas, to generate electricity, or as a basic raw material to produce chemicals and liquid fuels. Gasification is a process that uses heat, pressure, and steam to convert substances directly into gases, such as carbon monoxide and hydrogen. Gasification technology has differences in various aspects but there are four engineering factors that are the core of the gasification system such as atmospheric gasification reactor (level of oxygen or air content), internal and external heating, reactor design and operating temperature. The raw material used, prepared and introduced in dry form and small particles to the reactor chamber are called gasification. Raw materials experience heat, pressure and an environment rich or low in oxygen content in the gasification. There are three main products from the gasification process which are hydrocarbon gas (also called syngas), hydrocarbon liquid (oil) and coal (carbon black and ash). Syngas can be used as a fuel to produce electricity or steam or as a based material for many types of chemicals. When mixed with air, syngas can be used in petrol or diesel engines as a vehicle fuel with minor modifications to the engine. Gasification technology has several advantages over traditional fossil fuel-based energy production methods. It is able to produce energy from a wide range of raw materials, including waste, which reduces the need for landfills and incineration. Additionally, gasification can reduce greenhouse gas emissions by producing energy from low or negative carbon value raw materials.

Fabrication and characterisation of CrMnFeCoNi high entropy alloy electrocatalyst for oxygen evolution reaction

Water electrolysis is attracting increasing attention in becoming the main method for green energy production, which has long been hindered by the sluggish kinetics of oxygen evolution reaction (OER) and high cost of noble-metal (NM) containing electrodes. Template replication technique has been employed to fabricate porous CrMnFeCoNi high entropy alloy (HEA) bulk foams with > 95 % porosity. High entropy led to the formation of a single-phase solid solution of transition metals in the as-fabricated porous HEA bulk foam, and the lattice distortion brings about the outstanding OER performance that is close to that of the RuO2 reference sample. Effective electrochemically active surface area and amount of exposed active sites are increased by grinding into nanoparticles, which produced superior OER performance with a near-record low overpotential of ∼ 245 mV to drive a current density of 10 mA/cm2, a low Tafel slope of 73.6 mV/dec, a double layer capacitance of 102.3 mF, and excellent long-term stability over 24 h. This work demonstrates a cost-effective way to fabricate NM-free HEA electrocatalyst with complex structure and excellent stability in OER, which could help in advancing the research for alkaline water electrolysis.

Evaluation & optimization of solar-fossil-fuel-based multi-generation system with energy storage

The integrated solar energy hybrid system combines decentralized, energy-efficient approaches to various energy production methods, offering benefits such as improved efficiency, emissions reduction, cost-effectiveness, sustainability and reliability. Thus, in this study, the optimal design of a solar-fossil-fuel-based combined cooling, heating, power and freshwater generation system is presented. The main prime movers for generating power and heat concurrently are considered gas engines, diesel engines, gas turbines, and solid oxide fuel cell. The suggested system configuration contains a prime mover, two chillers, auxiliary boiler, desalination unit, parabolic trough collectors, photovoltaic panels, proton exchange membrane electrolyzer, thermal and cooling storage tanks. The genetic algorithm is considered as the optimization method for determining the lowest total annual cost. Various decision parameters are considered in this assessment, including the prime mover's capacity and operating under 12 partial loads, the number of prime movers, mass flow rate of the solar parabolic trough collectors, the electric cooling ratio, operation of 16 partial loads for chillers (with each chiller accommodating 8 partial loads), capacity of the auxiliary boiler, thermal and cooling energy storage tank capacities, number of photovoltaic panels, and the isentropic efficiency of the high pressure pump. The total annual cost comprises economic, energy, and environmental factors. Notably, the current system permits the purchase or sale of electricity to the grid. The optimal results disclosed a reduction of 27.08 %, 13.83 %, and a 23.80 % in the total annual cost of the system including the gas engine compared to the system with solid oxide fuel cell, diesel engine, and gas turbine, respectively. Furthermore, the system with solid oxide fuel cell showed fuel energy savings ratios of 48.6 %, 38.26 %, and 24.46 %, respectively, compared to the system including gas turbine, gas engine, and diesel engine. Additionally, in comparison to systems with solid oxide fuel cell, diesel engine, and gas turbine, the exergy efficiency of the system with gas engine is higher approximately 40.31 %, 3.04 %, and 92.50 %, respectively. The optimum total annual cost and exergy efficiency were determined to be 1.6708 ×106 $/year and 42.08 %, respectively, for the system utilizing the gas engine. Eventually, the comparison and analysis of optimal results from energy, exergy, economic and environmental perspectives were presented.

A Study on Energy Import Dependency in India

In today's globalized world, the interconnection between the economy and the environment is evident. A nation's prosperity and self-reliance hinge on adopting sustainable methods of energy production. Lack of energy security and self-sufficiency compels a country to import necessary energy resources, significantly impacting both sustainability and the foreign reserves. This paper addresses India's suboptimal utilization of energy resources, focusing on the import dependency in the energy sector due to the prevalent use of fossil fuel-based energy (conventional energy) from 2006 to 2020. Data analysis, incorporating graphical representations of conventional energy import and consumption, highlights the status, growth, and import dependency trends. The findings reveal that India heavily relies on imports for conventional energy resources, particularly crude oil. The paper concludes that the key solution for improving economic and environmental conditions lies in transitioning towards renewable energy resources.

Prospects of membrane catalysis in hydrogen energetics. Mini review

Hydrogen energetics is undoubtedly highly relevant today as it not only allows solving the issue of energy production from a renewable water source but can also prevent the formation of greenhouse gases. They say that any new idea is a well forgotten old one. The paper is dedicated to an excellent but still unimplemented work of Sainte-Claire Deville who managed to obtain hydrogen from water vapor using membrane technology. He used a clay pipe as a membrane which selectively permeated hydrogen. This process occurred with heating up to 950 °C. Sainte-Claire Deville managed to obtain only a mixture of hydrogen and oxygen in a ratio of 4:1 and then to clean the product from oxygen using chemical reactions. Modern membrane catalysts based on palladium or its alloys are selectively permeable only for hydrogen. This means that the membrane catalysis method with palladium membranes could allow to realize of hermal water disassociation more effectively and solve the issues of hydrogen energetics using only renewable raw materials. The history of hydrogen discovery and methods of its production was also studied in this review. Different methods of energy production were analyzed, including mineral resources, wind turbines, solar panels, hydroenergetics, electrolysis, and nuclear power, and a forecast was presented based on them. The review should be considered as an invitation to further discussions regarding this highly relevant and important topic

Research review on performance evaluation of a parabolic trough solar collector for hot water generation

This experimental study aimed to examine the impact of many parameters, including concentration ratio, optical efficiency, and thermal efficiency, on the performance of the trough solar collector. In the present day, nations throughout the globe exhibit a collective preoccupation with the issue of environmental pollution and its consequential impacts. However, it remains imperative for these nations to secure adequate energy resources in order to facilitate the progress and advancement of their respective countries. The utilization of conventional techniques, particularly those involving coal, fossil fuels, and organic matter, to generate the necessary energy yields a significant level of air pollution, which serves as the primary catalyst for global warming. The utilization of non-conventional methods for energy production is deemed more favorable in terms of environmental impact. However, the lack of economic viability serves as the primary deterrent for impoverished and emerging nations in adopting such non-conventional techniques. The geographical conditions have a significant role in determining the viability of nonconventional sources such as solar energy and wind energy. This study involved an analysis of the performance of a solar trough collector, with subsequent calculations of its efficiencies.

Converting formaldehyde in methanol with MoO2 under irradiation: A pollution-free strategy for cleaning air

Direct photocatalytic reduction of toxic formaldehyde (HCHO) in value-added chemicals and fuels is promising because that not only abates the environmental pollution, but also solves the energy shortage. Herein, self-supported MoO2 and MoO3 nanoparticles growing on Mo meshes were comparatively applied to the photocatalytic conversion of HCHO. Under UV–visble lights, MoO2 reduces HCHO in methanol (CH3OH) while MoO3 oxidizes HCHO in carbon oxide and water. Their contrary photocatalytic capacities were revealed. Compared with MoO3, the lower work function of MoO2 enables an electron-rich interface, realizing a complete reduction of 30 ppm HCHO to CH3OH in 30 min. Theoretical calculations clarify that a large number of delocalized electrons on MoO2 attracts HCHO molecule and activates its CO bond, facilitating subsequent hydrogenation and reduction of HCHO to CH3OH. As for MoO3, the wider bandgap and higher potential of valence band govern the photocatalytic oxidation of HCHO.

Synthesis and characterization of Mo-doped PbS thin films for enhancing the photocatalytic hydrogen production

Photocatalytic hydrogen production has gained considerable attention as a sustainable method for renewable energy production. Lead sulfide (PbS) compound has significant reserves and a suitable bandgap for the production of hydrogen gas via the water photo-splitting process. However, the charge recombination effect of the charge carriers severely limits their potential use in solar water splitting. Herein, the photoelectrodes of PbS were fabricated through the chemical bath deposition method and then doped with different Mo concentrations to optimize the hydrogen photo-production activity. Both structural and performance characterizations of the photoelectrodes have been carried out using various characterization techniques. The photoelectrochemical (PEC) performance of molybdenum (Mo)-doped PbS photoelectrodes exhibits a significant increase in the photocurrent density with the optimum photocurrent density of 1.2 mA/cm2 obtained at 0.8 % Mo doping atomic ratio which was twelve times higher than that of a pure PbS photoelectrode. The doping of Mo induces the electron-hole separation yield which results in improved electron transport characteristics. The Mo doping was as act as a donor site that increased the PbS film conductivity. The newly optimized Mo–PbS was used as a promising photoelectrode supported on commercial glass using the optimum Mo-doped PbS photoelectrode, the photoelectrochemical (PEC) hydrogen production rate was reached 122 μmol/h cm2 during the solar water splitting process and the conversion efficiency of the incident photon-to-current (IPCE) value was 7.0 % at 390 nm monochromatic exposure. Moreover, the stability of the optimum electrode was evaluated as a function of the number of runs and exposure time in addition to the electrochemical impedance study.

Techno-economic optimization of standalone photovoltaic-wind turbine-battery energy storage system hybrid energy system considering the degradation of the components

The increasing demand for renewable energy sources has led to the development of HRES that combine multiple sources of renewable energy to provide a reliable and efficient energy supply. However, renewable energy sources typically come with higher costs than conventional energy production methods. Hence, the optimal sizing of HRES is essential to prevent the oversizing of the system while ensuring a reliable supply of load demand, accommodating variations in meteorological conditions and changes in power demand. Numerous research papers addressing the optimal sizing problem are available in the literature. However, none of the mentioned studies take into account the power degradation of all renewable sources. The degradation of renewable sources, such as PV and WT, can have a significant impact on the performance of HRES. The degradation of PV panels can result in reduced efficiency and output, leading to a decrease in the overall energy production of the HRES. Similarly, WT may experience wear and tear over time, leading to reduced performance and output. The reduction in the output of renewables in the standalone system causes an increase in the loss of power supply probability (LPSP). This paper analyzes the optimal sizing of the HRES, considering the degradation of the sources. Further, analysis has also been carried out based on the number of BESS to be added to HRES to meet the derived constraints and their impact on the cost of energy as well.

Probing the potential of Al2CO/SiC heterostructures for visible light-driven photocatalytic water splitting using first-principles strategies

Photocatalytic water splitting is a sustainable and eco-friendly method for renewable energy production.

ПРЕОБРАЗОВАНИЕ ТЕПЛОВОЙ ЭНЕРГИИ В ЭЛЕКТРИЧЕСТВО: ПОТЕНЦИАЛ И ЭФФЕКТИВНОСТЬ ТЕРМОЭЛЕКТРИЧЕСКИХ ГЕНЕРАТОРОВ НА ОСНОВЕ ЭЛЕМЕНТОВ ПЕЛЬТЬЕ

Relevance Energy extraction using thermoelectric generators powered by Peltier elements through the application of both natural and engineered heat sources, aiming to create a new green method for clean energy production. Aim of research This study delves into the literature analysis to identify the factors that influence the accuracy of energy conversion, and aims to investigate the performance of Peltier elements while learning the principles of heat transfer, creating optimal conditions for the operation of a thermoelectric generator based on them. During the experiments, by adapting the process conditions, a process transfer function is formed, which aims to improve the energy generation efficiency. The aim of the study is to analyze the efficiency of thermoelectric generators based on Peltier cells. Research methods Physical foundations of thermoelectricity, development of a mathematical model. Results The study analyzed that the simulation revealed the presence of temperature gradients in regions with thermal waters of the mountain mass, and a mathematical model of the process was developed.

RESEARCH OF HEAT GENERATION AND CONSUMPTION MODES IN COMBINED HEAT SUPPLY SYSTEMS USING ALTERNATIVE ENERGY SOURCES

Alternative energy currently has all the technical means that allow it to be considered a classic addition to traditional methods of energy production. Modern energy technologies require a more effective and reliable solution to the problem of energy supply based on the integrated use of various types of renewable energy sources, energy accumulators of various types, heat pumps, combined means of thermal modernization of buildings and alternative fuel energy backups. In modern heat supply systems using alternative energy sources, usually at least 2 heat sources are used - a renewable heat source and a traditional source as reserve and peak. The operation of gas, solid fuel, pellet and electric boilers, solar collectors, various types of heat pumps in the heat supply systems of buildings and civilian buildings is analyzed. The high-quality operation of the heat supply system is affected by various schemes of connecting consumers to heat generators. The specifics of the effective operation of the combined heat supply system are the coordination of various hydraulic “generator-consumer” modes. In practice, three approaches are used to coordinate the modes of operation of alternative heat supply systems with consumers: regulation of the power of the heat source, programming of heat consumption modes, introduction of heat accumulators. It is important to find out the conditions for the effective use of heat accumulators for intermittent heating mode, which can ensure a decrease in the thermal power of a heat generator operating in superheat mode. The operation of the pilot plant of the integrated system of alternative heat supply (ISAHS) was studied, the technical and economic indicators obtained for the heating period for three different types of heat generators: gas boiler, pellet boiler, heat pump were analyzed. An experimental study of the combined heat supply system for various heat supply facilities made it possible to establish that for public buildings, a rational way to increase their efficiency is the use of intermittent heating modes, a two-stage storage system, and coordination of structural and mode parameters of the main contours of the system. Keywords: combined heat supply system, boiler, solar collector, heat pump, heat accumulator

Moisture-induced ionovoltaic electricity generation using lead free 2-dimensional Cs3SbBiBr9 perovskite

Harvesting of electricity from the environment is an easy, effective and sustainable method for energy production: this is based on the ionovoltaic effect, a process where moisture absorption induces ionic motion in a material, thus driving the movement of charge carriers and generating electricity.

A State-of-the-Art Review of Hydronic Asphalt Solar Collector Technology for Solar Energy Harvesting on Road Pavement

Nature inspires innovative renewable energy solutions by advancing our road pavements, as the sun is the only infinite and accessible source of clean and green energy on our planet. In addition to the various solar energy production methods, a new paradigm for utilizing asphalt pavement as a solar collector is being developed for self-powered energy harvesting. Due to direct solar radiation, flexible paved surfaces exposed to direct sunlight can heat up to 70°C in the summer. The heat is then dissipated into the environment, causing the urban heat island effect, and accelerating thermal oxidation of asphalt pavement. This can lead to structural failure and reduced pavement performance. This study aims to present a state-of-the-art review of hydronic asphalt solar collectors (HASCs) and propose the best model to enhance the performance of asphalt solar collectors. The findings of the study concluded that asphalt has the potential to absorb solar energy and store heat energy. This can be achieved by assembling and modifying conventional asphalt structures into modern asphalt solar collector designs that consist of pipe arrangements below the paved surface filled with liquid flowing through the pavement surface. The study found that a significant limitation of previous research was that it focused on optimizing the temperature profile at various depths but did not focus on structural improvements to reduce failure and increase the performance of asphalt solar collectors. Therefore, this review study proposed a new technique of using conductive and waste materials to enhance the performance of asphalt solar collectors.

Investigating the Influence of Inlet Relative Humidity on Polymer Electrolyte Membrane Fuel Cell Performance by Visualizing 4-D Water Distributions in Gas Diffusion Layers

The catastrophic effects of atmospheric greenhouse gases and the depletion of non-renewable resources has led to the urgency to develop clean, sustainable energy technologies to meet increasing energy demands. However, the intermittent nature of current renewable energy technologies warrants the acquisition of on-demand renewable energy through either energy production or storage methods. Polymer electrolyte membrane fuel cells (PEMFCs) are promising candidates for this task, as they utilize the most abundant element on Earth, hydrogen, to produce high amounts of power under rapid changes in load with little to no greenhouse gas emissions (1). Therefore, PEMFCs have great potential to help offset the negative impact of atmospheric pollution due to excessive carbon emissions. However, liquid water management issues associated with high power output of the fuel cell typically leads to reduced performance and durability of the fuel cell, and thereby hinders global implementation of these devices (2). To minimize these losses and improve GDL material designs, an understanding of the relationship between product liquid water distributions in the cathode GDL and transport properties of PEMFCs under varying operating conditions is highly valuable. Previous works have characterized the effect of operating temperature on liquid water pathways and distributions in GDLs by visualizing operando PEMFCs with 3D imaging techniques such as X-ray computed tomography (CT) (3). The high-speed, high-resolution capabilities of these imaging techniques enable the visualization of dynamic pore-scale activity to elucidate transport mechanisms in the GDL.In this work, the effect of inlet relative humidity on the formation and distribution of liquid water pathways in cathode GDLs is investigated by imaging a PEMFC operando with synchrotron X-ray CT at high spatial resolution, enabling the resolution of water in the individual pores of the GDL. The contribution of a microporous layer (MPL) is also explored by imaging a cell with an MPL and without. Imaging is conducted on a specialized cell designed to facilitate continuous rotation about the CT stage, enabling fast acquisition of consecutive scans to achieve high temporal resolution useful for visualizing the dynamic development of preferential water pathways. Additionally, electrochemical impedance spectroscopy was performed to quantify mass transport losses. The sequence of CT images was utilized to capture the dynamics of liquid water development as well as stabilized water distributions. Visualizing the reconstructed images shows that as current increases, water production increases, and the development of water pathways to breakthrough at the flow field interface is observed. Additionally, results show that an increase in relative humidity led to a significant increase in cathode GDL water saturation.The contribution of this study to understanding transport mechanisms in GDL materials is significant to the characterization and optimal design of materials for improved PEMFC performance. Ultimately, the goal of this work is to accelerate the worldwide adoption of PEMFCs as a sustainable, reliable solution to replace conventional carbon-emitting energy sources.1. Alaswad et al., J. Hydrog. Energy, 41, (2016)2. Nagai et al., J. Power Sources, 435, (2019)3. D. Shum et al., Electrochem. Acta, 256, (2017)

Growth of proton conducting strontium cerate composites

The increased population and modern way of life have greatly depleted the effectiveness of traditional energy production methods. There is a strong demand for environmentally friendly and renewable alternatives to replace the old systems. Sustainable energy production systems have emerged as a vital replacement for the conventional use of fossil fuels. Among these, solid oxide fuel cells (SOFCs) play a significant role. Recently, researchers have developed electrolyte components for SOFCs using proton-conducting perovskites with excellent conductivity. This critical assessment presents a yearly overview of innovative strategies for utilizing doped strontium cerate perovskites in energy production systems, a novel approach. The importance of identifying dopants that can enhance conductivity and stability in strontium cerate composites is emphasized, creating a crucial element for high-performance energy systems. Through a comparative study, it's been found that rare earth elements with smaller ionic radii, such as thulium-doped strontium cerium zirconate in an additional composite form, can outperform the traditionally used ytterbium-doped strontium cerate composites in proton-conducting applications.

Biomass Waste Conversion Technologies and Its Application for Sustainable Environmental Development—A Review

With the global population continuing to increase, the demand for food and energy has escalated, resulting in severe environmental pressures. Traditional methods of food and energy production have left a significant footprint on the environment, primarily due to the emission of greenhouse gases and a notable surge in waste production. Nevertheless, scientists have recently focused on developing sustainable solutions by managing biomass waste and converting it into useful products. Various biomass conversion technologies, including pyrolysis, gasification, and fermentation, have emerged to transform waste materials into valuable commodities like biofuels, fertilizers, and chemicals. These technologies present an alternative to conventional energy production methods and decrease reliance on non-renewable resources. Furthermore, the by-products generated through biomass conversion, such as biochar, possess utility as valuable soil amendments. This review emphasizes the potential of biomass conversion technologies in providing sustainable solutions for waste management, food and energy production, and reducing negative environmental impacts while providing valuable by-products for agricultural use. The focus is on Lebanon, which is facing a waste and energy crisis, with an aim to encourage and promote sustainable practices by highlighting different green waste management technologies. Focusing on the application of biochar in soil, our goal is to provide cost-effective and eco-friendly solutions to various agricultural and environmental challenges in Lebanon. This includes using biochar from biomass waste as a soil amendment to boost crop yields, remediate soil pollution, reduce soil drought stress, and address other related issues.

How ICT capital affects the spatial correlation of energy consumption-a new perspective based on spatially correlation network.

ICT has significantly transformed the traditional energy production and service methods, changed the correlation characteristics of energy consumption network, and contributed to the establishment of cross-regional, open, and synergistic energy ecological networks. In this paper, social network analysis (SNA), dynamic SYS-GMM model, and mediating effects model are employed to deliberate on the mechanism of ICT capital's influence on the spatial correlation of energy consumption from 2000 to 2019. Firstly, this study employs an enhanced gravity model to precisely delineate the spatial correlation network of energy consumption in China, further applies the SNA to analyze the network structural characteristics, and then uses the econometric model to investigate the influence mechanism and heterogeneity of ICT capital on the spatial correlation of energy consumption. The study demonstrates a progressive spatial correlation in energy consumption in China, with eastern provinces emerge as the center of the network, assuming the position of the "dominant player." Conversely, the central provinces act as the "bridge," and western provinces are positioned at the periphery, referred to as the "edge" of the network. ICT capital contributes to improving the energy consumption spatial correlation, mainly by stimulating green technology innovation, promoting industrial structure optimization, accelerating human capital accumulation, and reducing income inequality. As ICT capital expands, the eastern region becomes more preeminent as a network hub for energy consumption, the central region increases its dominance slightly, and the western region's marginal position does not change significantly. Furthermore, the presence of ICT capital significantly enhances the intensity of energy consumption spatial correlation more prominently for low-carbon pilot areas and high Internet level areas. This study guides provinces to fully utilize ICT capital to reach collaborative energy-saving goals, and promotes the breaking down of regional competitive barriers in energy systems to build cooperative energy conservation ecological networks.