Injection Energy Research Articles

Charge-exchange measurements of high-energy fast ions in LHD using negative-ion neutral beam injection

A new sightline geometry for the fast-ion D-alpha (FIDA) diagnostic on the Large Helical Device (LHD) has been confirmed to measure signals for high-energy fast ions produced by negative-ion neutral beam injection. The newly installed sightline uses a 180 keV tangential negative-ion neutral beamline as the active source. Due to the small angle between the beamline and FIDA sightline, the relative velocity between fast ions and injected neutrals is small. This allows for high-energy fast ions just below the beam injection energy to produce measurable Doppler-shifted FIDA emission. Experiments were conducted at LHD in order to compare the new sightline, which views a high-energy negative-ion tangential beamline, and the old sightline, which views a low-energy perpendicular positive-ion neutral beamline. The measured FIDA signal is validated against predictions from the synthetic fast-ion diagnostic code FIDASIM with a distribution function modelled by the 5D transport code GNET. The results of the experiment confirm that reducing the viewing angle with a tangential active beam allows FIDA diagnostic to view high-energy fast ions with a sufficient signal-to-noise ratio.

Security analysis and adaptive false data injection against multi-sensor fusion localization for autonomous driving

Multi-sensor Fusion (MSF) algorithms are critical components in modern autonomous driving systems, particularly in localization and AI-powered perception modules, which play a vital role in ensuring vehicle safety. The Error-State Kalman Filter (ESKF), specifically employed for localization fusion, is widely recognized for its robustness and accuracy in MSF implementations. While existing studies have demonstrated the vulnerability of ESKF to sensor spoofing attacks, these works have primarily focused on a black-box implementation, leading to an insufficient security analysis. Specifically, due to the lack of theoretical guidance in previous methods, these studies have consistently relied on exponential functions to fit attack sequences across all scenarios. As a result, the attacker had to explore an extensive parameter space to identify effective attack sequences, lacking the ability to adaptively generate optimal ones. This paper aims to fill this crucial gap by conducting a thorough security analysis of the ESKF model and presenting a simple approach for modeling injection errors in these systems. By utilizing this error modeling, we introduce a new attack strategy that employs constrained optimization to reduce the energy needed to reach the same deviation target, guaranteeing that the attack is both efficient and effective. This method increases the stealthiness of the attack, making it harder to detect. Unlike previous methods, our approach can dynamically produce nearly perfect injection signals without requiring multiple attempts to find the best parameter combination in different scenarios. Through extensive simulations and real-world experiments, we demonstrate the superiority of our method compared to state-of-the-art attack strategies. Our results indicate that our approach requires significantly less injection energy to achieve the same deviation target. Additionally, we validate the practical applicability and impact of our method through end-to-end testing on an AI-powered autonomous driving system.

Divertor Tokamak Test: Impact of NBI shine-through and beam-plasma interaction on Divertor Tokamak Test facility

IntroductionIn this work, we aim to explore numerically the behavior of beam energetic particles in the Divertor Tokamak Test (DTT), a superconductive device equipped with a Neutral Beam Injection (NBI) system capable of injecting neutrals up to 510 keV.MethodWe explore beam ionization and beam slowing down for different DTT plasma scenarios. Numerical simulations are performed using the ASCOT suite of codes, including a wide-range scan of plasma density and beam injection energy. For different plasma conditions, we estimate shine-through losses, including the heat fluxes on the first wall thanks to dedicated particle tracing simulations. Orbits of newly-born fast ions are characterized by means of the constant of motion phase space, showing how trapped energetic particles’ population and prompt losses change with plasma density and NBI energy.Results and discussionSlowing down simulations show that NBI injection at 510 keV is well coupled to DTT plasmas. DTT NBI will be one of the sources of auxiliary ion heating, with an absorbed power ratio of up to ∼50% depending on plasma and beam parameters. At low plasma densities, energetic particle confinement is less efficient, and NBI power and/or energy reduction is expected.

Gradient Hole Injection Inducing Efficient Exciton Recombination in Blue (475 nm) Perovskite QLEDs.

Perovskite quantum dots (QDs) are emerging as excellent light sources for light-emitting diodes (LEDs). However, the performance of blue perovskite QD-based LEDs (QLEDs) still lags behind that of red and green counterparts, which is hindered by blue perovskite QDs with broad bandgaps that tend to increase nonradiative recombination. Here, we designed a gradient energy for hole injection utilizing multiple hole injection layers (HTLs) combined with carbazole-based small-molecule modification to reduce the hole injection barrier between HTLs and QD layers and improve the hole injection efficiency, realizing efficient exciton recombination in blue perovskite QLEDs. Moreover, the QD film on the designed HTLs demonstrates a lower surface roughness and improved photoluminescence properties. The optimized blue CsPbCl3-xBrx QLEDs exhibit an impressive external quantum efficiency of 20.7% with an electroluminescence peak at 475 nm and a turn-on voltage of 2.6 V, representing the state-of-the-art for blue perovskite LEDs emitting in the range of 460-480 nm.

Optimal noise injection energy allocation and collection of energy harvesting attacker under quality-changeable environment

Optimal noise injection energy allocation and collection of energy harvesting attacker under quality-changeable environment

Design and characterization of novel A2B2 porphyrins: Solar cell applications, antimicrobial properties, and molecular docking insights

We synthesized novel A2B2 porphyrin derivatives (5a-e, 7a,b) with yields of 60–73 %. Porphyrin 2 was prepared by reacting dipyrromethane 1 with p-bromobenzaldehyde. Porphyrin 2 was then treated with n-BuLi in DMF at -15 °C to produce porphyrin 3. The final compounds, 5a-e and 7a,b, were synthesized by reacting porphyrin 3 with activated nitriles (4a-e) and thiazolone derivatives (6a,b). The structures of the novel compounds were confirmed using infrared (IR) spectroscopy, proton nuclear magnetic resonance (1H NMR), carbon-13 nuclear magnetic resonance (13C NMR), mass spectrometry (MS), and elemental analysis. DFT calculations were used to explore the electronic structures and energy levels of the synthesized compounds. Compounds 7a and 7b showed improved electron transfer efficiency compared to 5a-e, with HOMO and LUMO levels aligned for optimal DSSC performance. The HOMO levels are below the electrolyte's redox potential (-5.2 eV), and the LUMO levels are above TiO2's conduction band (-4.2 eV), facilitating efficient electron injection and dye regeneration. Key parameters such as open-circuit voltage (VOC), free energy of injection (ΔGinj), and regeneration (ΔGreg) were calculated, highlighting these compounds' potential for DSSC applications. The newly synthesized compounds were tested for antibacterial activity against C. albicans, B. subtilis, and E. coli. Compounds 5e (MIC50 3.125 µg/mL, with inhibition zone 45 mm against B. subtilis) and (MIC50 12.5 µg/mL, with inhibition zone 31 mm against E. coli) and 7a (MIC50 3.125 µg/mL, with inhibition zone 44 mm against B. subtilis) and (MIC50 12.5 µg/mL, with inhibition zone 30 mm against E. coli) showed the highest antimicrobial activity. Compound 5e's carboxylic acid group likely enhances activity through strong hydrogen bonding and improved solubility, aiding interaction with microbial enzymes or cell walls. Compound 7a's dimalononitrile groups, being highly electron-withdrawing, increase reactivity, while phenylthiazolidine rings offer additional binding sites through hydrogen bonding and pi-stacking interactions. Docking studies of the most potent antibacterial porphyrin analogues, 5e and 7a, against the target protein PDB: 1ECl showed promising results. Compound 5e achieved a docking score of ‐7.9559 kcal/mol with an RMSD of 1.9743 Å, while compound 7a had an even better score of ‐8.9174 kcal/mol. Compound 7a formed interactions with two H-acceptors from its cyano groups, binding to Arg136 and Lys488, and a Pi-H interaction between the thiazolone ring and Asn158, with distances of 3.19, 3.63, and 3.71 Å, respectively.

Fuel injection rate variation and energy consumption of solenoid in a diesel solenoid injector with injector driving current patterns

Fuel injection rate variation and energy consumption of solenoid in a diesel solenoid injector with injector driving current patterns

Residual Vibration Suppression of Piezoelectric Inkjet Printing Based on Particle Swarm Optimization Algorithm.

Piezoelectric inkjet printing technology, known for its high precision and cost-effectiveness, has found extensive applications in various fields. However, the issue of residual vibration significantly limits its printing quality and efficiency. This paper presents a method for suppressing residual vibration based on the particle swarm optimization (PSO) algorithm. Initially, an improved PI model considering the nonlinear hysteresis characteristics of piezoelectric ceramics is established, and the model is identified through a strain gauge circuit to ensure its accuracy in describing the nonlinear hysteresis characteristics. Subsequently, a dynamic model of the piezoelectric inkjet printing system is constructed, with precise parameter identification achieved using the self-induction principle. This enables precise simulation of residual vibration. Finally, the driving waveform is optimized based on the PSO algorithm, with iterative calculations employed to find the optimal combination of driving waveform parameters, effectively suppressing residual vibration while ensuring sufficient injection energy. The results indicate that this method significantly reduces the amplitude of residual vibration, thereby effectively enhancing printing quality and stability. This research offers a novel solution for residual vibration suppression in piezoelectric inkjet printing technology, potentially advancing its applications in printing and biofabrication.

The Physical Origin of the Stellar Initial Mass Function

Stars are among the most fundamental structures of our Universe. They comprise most of the baryonic and luminous mass of galaxies; synthesize heavy elements; and inject mass, momentum, and energy into the interstellar medium. They are also home to the planets. Because stellar properties are primarily decided by their mass, the so-called stellar initial mass function (IMF) is critical to the structuring of our Universe. We review the various physical processes and theories that have been put forward as well as the numerical simulations that have been carried out to explain the origin of the stellar IMF. Key messages from this review include the following: ▪Gravity and turbulence most likely determine the power-law, high-mass part of the IMF.▪Depending of the Mach number and the density distribution, several regimes are possible, including ΓIMF ≃ 0, −0.8, −1, or −1.3, where dN/d log M ∝ M ΓIMF . These regimes are likely universal; however, the transition between these regimes is not.▪Protostellar jets can play a regulating influence on the IMF by injecting momentum into collapsing clumps and unbinding gas.▪The peak of the IMF may be a consequence of dust opacity and molecular hydrogen physics at the origin of the first hydrostatic core. This depends weakly on large-scale environmental conditions such as radiation, magnetic field, turbulence, or metallicity. This likely constitutes one reason for the relative universality of the IMF.

Controlling Plasmonic Catalysis via Strong Coupling with Electromagnetic Resonators.

Plasmonic excitations decay within femtoseconds, leaving nonthermal (often referred to as "hot") charge carriers behind that can be injected into molecular structures to trigger chemical reactions that are otherwise out of reach─a process known as plasmonic catalysis. In this Letter, we demonstrate that strong coupling between resonator structures and plasmonic nanoparticles can be used to control the spectral overlap between the plasmonic excitation energy and the charge injection energy into nearby molecules. Our atomistic description couples real-time density-functional theory self-consistently to an electromagnetic resonator structure via the radiation-reaction potential. Control over the resonator provides then an additional knob for nonintrusively enhancing plasmonic catalysis, here more than 6-fold, and dynamically reacting to deterioration of the catalyst─a new facet of modern catalysis.

Anisotropic regularization for inversion of fast-ion loss detector measurements

Abstract We introduce an anisotropic regularization framework for the reconstruction of distribution functions from measurements, utilizing an approach that applies distinct regularization techniques such as non-negative constrained Tikhonov, total variation, and Besov-space priors, either penalizing the one-norm or the two-norm, in each dimension to reflect the anisotropic characteristics of the multidimensional data. This method, applied to fast-ion loss detector (FILD) measurements, demonstrates a significant improvement over conventional nonnegative-constrained zeroth-order Tikhonov regularization because the prior information of the form of the distribution allows better reconstructions. The validity of the approach is corroborated through FILD measurements of prompt fast-ion losses in an ASDEX Upgrade discharge, where the reconstructed distribution function agrees well with the prompt-loss distribution predicted by ASCOT simulations. Moreover, we develop a composite quality metric, Q, that combines the mean squared error and the Jaccard index for a comprehensive evaluation of reconstruction accuracy and spatial fidelity. Finally, anisotropic regularization is applied to FILD measurements at ASDEX Upgrade to study fast-ion acceleration by edge-localized modes. The refined analysis resolves fine structure in the pitch of the accelerated ions and clearly shows that some ions are accelerated to over twice the injection energy.

A Self‐Assembling Molecule for Improving the Mobility in PEDOT:PSS Hole Transport Layer for Efficient Perovskite Light‐Emitting Diodes

AbstractPoly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), the most widely used hole injection layer (HIL) for perovskite light‐emitting diodes (PeLEDs), has a large hole injection energy barrier and easy charge separation at PEDOT:PSS/perovskite layer. Here, a self‐assembling molecule (SAM) called (2‐(3,6‐dimethoxy‐9H‐carbazol‐9‐yl)ethyl) phosphonic acid (MeO‐2PACz) is introduced as an interlayer between PEDOT:PSS and perovskite to overcome the limitations of PEDOT:PSS HIL. The MeO‐2PACz interlayer facilitated hole injection due to the reduced hole injection energy barrier and the improved hole mobility, enhanced photoluminescence (PL) due to the prevented charge transfer from perovskite into PEDOT:PSS, and reduced interface trap density due to the passivation of methoxy and carbazole group toward perovskite. As a result, PeLEDs with MeO‐2PACz interlayer has greatly enhanced maximum luminance (Lmax = 17,310 cd m−2) and reduced leakage current, resulting in higher maximum external quantum efficiency (EQEmax = 21.50%) compared to pristine Control device (EQEmax of 4.82%).

Optimization of energy efficiency in gas production from hydrates assisted by geothermal energy enriched in the deep gas

Scaled-up production from natural gas hydrates is still facing the significant issues of limited gas yield and unsustainable hydrate dissociation. In this work, the deep gas with huge reserves and abundant geothermal energy was used to enhance the hydrate production efficiency. Results showed that the geotherm-assisted gas production was significantly increased by 178.22 %. Surprisingly, the hydrate dissociation rate was slightly weakened by 3.66 % due to the hindered fugacity of the gas from hydrate decomposition as a result of the fast deep gas upwelling. Besides, the energy flow analysis showed that up to 40.67 % of the deep gas injection energy was dissipated to the surroundings, with only 8.28 % utilized for the hydrate decomposition. Consequently, the multi-well deployment was used to regulate the deep gas injection rate. It was found that the multiple wells weakened the sealing effect of hydrate on migration channels, preventing the violent gas upwelling while increasing the hydrate decomposition amount under geothermal stimulation. Then, prolonging crossflow distance of deep gas in the hydrate layer enabled the sediment to absorb more injected energy, resulting in the minimum wasted energy ratio. Not limited to this, the more stable gas production throughout the whole process effectively guaranteed the safety of exploitation. Finally, the hydrate decomposition rate in the depressurization and constant pressure stages was found to be positively correlated with the utilization ratio of the injected energy and the injected rate, respectively. The results could help guide the formulation of the multi-gas joint production scenarios in the field tests to balance production efficiency and cost.

Development of high-level applications for High Energy Photon Source booster

The High Energy Photon Source (HEPS), is the first fourth-generation storage ring light source being built in the suburb of Beijing, China. The storage ring was designed with the emittance lower than 60 pm.rad with a circumference of 1.36 km and beam energy of 6 GeV. Its injector contains a 500 MeV S-band Linac and a 454 m booster which was designed as an accumulator at the extraction energy. In the energy ramping control design of HEPS booster, the ramping process was programed to be able to stop and stay at any energy between the injection energy and the extraction energy. This feature enables us to conduct energy-dependent machine studies and ramping curve optimization. The beam commissioning of HEPS Linac finished in June, 2023. And the beam commissioning of booster started in the end of July, 2023. In November 17, main target values proposed in the preliminary design report has been reached. The high-level applications (HLAs) are essential tools for beam commissioning. The development of HLAs, which are based on the framework named Python accelerator physics application set (Pyapas), started in the end of 2021. The HEPS physics team spent more than one year to develop and test the HLAs to meet the requirements of beam commissioning of the booster. Thanks to the modular design, the principle based on physical quantities, and the ability of running simulation models online from the Pyapas, the development efficiency and reliability of the HLAs have been greatly improved. In particular, the principle based on physical quantities allows us to control the beam more intuitively.

COSMONAUT: A COmpact spectrometer for measurements of neutrons at the ASDEX upgrade tokamak.

A COmpact Spectrometer for Measurements Of Neutrons at the ASDEX Upgrade Tokamak (COSMONAUT) has been developed for spectroscopy measurements of the 2.45MeV neutron emission from deuterium plasmas at the ASDEX Upgrade. The instrument is based on a CLYC-7 inorganic scintillator, whereby the detection of fusion neutrons occurs via their interaction with 35Cl nuclei in the detector crystal, leading to a peak in the detector response function and providing excellent neutron/gamma-ray discrimination capabilities. The diagnostics is installed along a radial line of sight and makes use of a digital system to record time resolved data for the whole duration of the discharge. Measurements in ASDEX Upgrade plasmas with neutral beam injection have been carried out and are successfully interpreted using state-of-the-art modeling codes. Next step applications of the diagnostics are in experiments aimed at generating energetic particles by ion cyclotron resonance heating schemes. In these scenarios, COSMONAUT will provide unique information on the acceleration of deuterons beyond the beam injection energy and on their confinement, for comparison with modeling.

Preliminary results of the 2023 International Fermilab Booster Studies

An overview is given of the methods and preliminary results from dedicated beam studies on three topics conducted over five days in July 2023. In the first study, the Fermilab Booster magnets were held constant at magnetic fields corresponding to the injection energy. The beam loss and emittance growth were observed under varying intensity, tunes, and sextupole resonances. The corresponding beam conditions were also simulated with the MADX-SC code [1]. In the second study, measurements of the vertical half-integer resonance and correction methods are conducted for high-intensity beams ramping in the Booster. Finally, syncho-betatron instabilities are observed during transition-crossing in the Booster under strong space-charge conditions.

Operation of Rf Systems During Joint Booster and Nuclotron Sessions

The article discusses the results of commissioning of RF systems of the NICA injection complex and plans for their further development. The preparation of the injection complex for injection into the collider requires an increase in the beam intensity in the Nuclotron outlet by about two orders of magnitude. Obtaining the required intensity will be achieved by accumulating the beam on injection energy using electronic cooling and reducing acceleration losses. This will require optimization of all systems of the complex, including a significant reduction in losses associated with RF systems. The experience allows us to choose the optimal strategy for the further development of HF systems. The main directions are: (1) accumulation of the beam in the longitudinal phase space during injection into the Booster, (2) reduction of the growth of the longitudinal emittance during acceleration, (3) bypass of the beam clot-in-clot from the Booster to the Nuclotron without growth of the longitudinal emittance, and (4) minimizing losses during acceleration and beam bypasses. The latter requires matching the acceleration rate with the capabilities of existing HF systems.

Numerical simulation of RHIC polarized proton run 17 spin flipper experiments

RHIC nine-magnet spin flipper has been operated successfully during RHIC polarized proton Run 17, with 97% spin flip efficiency achieved. The results show the importance of mirror resonance removal, small spin tune spread, and proper spin flipper driving tune sweep speed. Detailed spin tracking simulations, based on a Lorentz force and Thomas-BMT differential equation numerical solver code for accuracy, have been carried out to understand the experimental results. Agreement within measurement accuracy is obtained at injection energy, 23.8 GeV. It is not as tight at 255 GeV, reasons for that are exposed. These measurements and numerical studies allow to determine the sensitivity of spin-flip efficiency to the dispersion slopes at the two Siberian snakes and to the ac dipole frequency sweep speed. They also provide guidance for future developments at BNL’s electron-ion collider. Published by the American Physical Society 2024

Particle Acceleration and Magnetic Field Amplification by Relativistic Shocks in Inhomogeneous Media

Particle acceleration and magnetic field amplification in relativistic shocks propagating in inhomogeneous media are investigated by three-dimensional magnetohydrodynamical (MHD) simulations and test-particle simulations. The MHD simulations show that the interaction between the relativistic shock and dense clumps amplifies the downstream magnetic field to the value expected from observations of the gamma-ray burst. The test-particle simulations in the electromagnetic field given by the MHD simulation show that particles are accelerated by the downstream turbulence and the relativistic shock. We provide the injection energy to the shock acceleration in this system. If the amplitude of upstream density fluctuations is sufficiently large, low-energy particles are initially accelerated to the injection energy by the downstream turbulence and then rapidly accelerated to higher energies by the relativistic shock. Therefore, the density fluctuation significantly affects particle acceleration in the relativistic shock.

Injection and capture of antiprotons in a Penning–Malmberg trap using a drift tube accelerator and degrader foil

The Antiproton Decelerator (AD) at CERN provides antiproton bunches with a kinetic energy of 5.3 MeV. The Extra-Low ENergy Antiproton ring at CERN, commissioned at the AD in 2018, now supplies a bunch of electron-cooled antiprotons at a fixed energy of 100 keV. The MUSASHI antiproton trap was upgraded by replacing the radio-frequency quadrupole decelerator with a pulsed drift tube to re-accelerate antiprotons and optimize the injection energy into the degrader foils. By increasing the beam energy to 119 keV, a cooled antiproton accumulation efficiency of (26±6)% was achieved.