Singlet Energy Research Articles

Modulating Polaron Behavior in PM6 Blends with Nonfullerene and Fullerene Acceptors: The Importance of Singlet Energy Transfer

AbstractNon‐fullerene acceptors are paving the way toward high‐efficiency organic photovoltaics. In the quest to both understand the origins of these high efficiencies and to push them ever higher, the interactions between the different excited states that contribute to device function ineeds to be understood. In this work, the presence and behavior of bimodal polarons are investigated in high‐performing conjugated polymer PM6 and its blends with non‐fullerene acceptor ITIC‐4F and fullerene acceptor PC60BM. Transient absorption spectroscopy is used to gain insight into the blends’ polarons as a function of blend ratio. Two types of polymer polaron are identified in the PM6:fullerene blends: bound polarons located in pure polymer domains and “interfacial” polarons located in mixed domains. In contrast, the PM6 polarons observed in PM6:ITIC‐4F blends show very different behavior, most notably an almost complete lack of the bound polarons. This loss is attributed to efficient singlet energy transfer from donor to acceptor prior to charge photogeneration taking place. This energy transfer suppresses the formation of bound polaron pairs that rapidly decay back to the ground state, thereby providing another pathway that enables high efficiencies in non‐fullerene acceptor‐based organic photovoltaics.

Design and Synthesis of Aggregation‐Caused Quenching Hydroxy‐Phenanthroimidazole Derivatives for Probing of Fe3+ Ions and as Potential Blue Light Emitters

AbstractFluorescence aggregated molecules tend to employ versatile opportunities in metal ion probe sensors and fluorescent lighting. To achieve this dual challenging task, currently synthesized three phenanthroimidazole‐naphthalene‐based compounds Pq‐tBu‐OH, Pq‐mF‐OH, and Pq‐pF‐OH are derived based on substitution at N1 position for better photophysical and electrochemical properties. Compared experimental and theoretical calculations define the highest bandgap to be 2.75 eV of Pq‐pF‐OH, and the same molecule expressed a higher (348 °C) thermal decomposition. The calculated singlet and triplet energies found in the range of 3.24–3.67 and 2.70–2.72 eV indicate well energy transfer from S1→S0 (quantum yield of 23.36 %, lifetime is 4.05 ns). Among the numerous morphologies, the solid form exhibited improved intensive deep blue emission (x=0.159, y=0.051), and its InGaN LED results demonstrated a strong deep blue emission at 418 nm. Moreover, the fluorophores were experimentally visualizing the aggregation‐caused quenching (ACQ) which enables the probing of Fe3+ ion. However, for the first time, the ACQ‐assisted concept is applied through synthesized molecules for Fe3+ ion probing via fluorescence spectra, Job's plot calculation, and 1H NMR results. In addition, the probe works excellently at a detection limit of 10 μM and it could also act as a potential competitor for lighting applications.

Dual Emission and Low-Temperature Afterglow in Xanthone-Dibenzoazepine for High EQE Host-Guest OLEDs with Low-Efficiency Roll-Off.

Research has been driven to demonstrate organic light-emitting diodes (OLEDs) with high efficiency, and in the quest for new materials, thermally activated delayed fluorescence (TADF) emitters have been employed. Preparation of donor-acceptor (D-A) π-conjugates is a useful guideline for developing TADF emitters. TADF emitters have shown excellent progress and high maximum external quantum efficiency (EQEmax) for OLEDs in the recent past; however, they suffer with substantial roll-off resulting in a decrease in their efficiency. In order to have efficient OLED emitters with less efficiency roll-off, we designed a xanthone-amine derivative with twisted electron-rich dibenzoazepine having limited rotation at the donor-acceptor bond. Xan-Azepine shows solvent polarity-dependent fluorescence in the range of 441- 597 nm having a lifetime below 10 ns. At 77 K in Me-THF, a triplet at 557 nm was observed having a decay lifetime of 0.75 s and an afterglow for about 6 s. In powder, it shows dual emission, i.e., fluorescence (490 and 6 ns) and phosphorescence (530 nm and 192 μs) at ambient conditions. The energy difference between the singlet and triplet energy levels of Xan-Azepine is found to be 0.18 eV in the powder sample. Its blend in 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) showed delayed fluorescence with a lifetime of 118 μs at 300 K, while it reduced to 84 μs at 150 K. These observations suggest the TADF nature of Xan-Azepine in its CBP blend. OLED devices of Xan-Azepine showing a turn-on voltage of 2.8 V and a EQEmax of 12% were successfully fabricated. In the doped films of Xan-Azepine (5 wt %) with CBP, a maximum luminescence of 5980 Cd/m2 at a current density of 70 mA/cm2 was obtained, resulting in devices with low-efficiency roll-off (2.75%).

Influences of hydrogen-bond promoting hydroxyl group on photophysical and catalytic properties of lanthanide pyridine dicarboxylate frameworks

To study the influences of hydrogen bonding interactions on photophysical properties and catalytic activities with insignificant interference from structural disparity, two new isostructural [LnIII2(OH-pda)(ox)2(H2O)4]∙4H2O coordination polymers (LnIII = EuIII (I) and NdIII (IIa), OH–H2pda = 4-hydroxypyridine-2,6-dicarboxylic acid, H2ox = oxalic acid) were synthesized and characterized. They are also isostructural to [NdIII2(pda)(ox)2(H2O)4]∙4H2O (IIb), H2pda = pyridine-2,6-dicarboxylic acid) containing pda2− instead of OH-pda2-. The identical framework structure of IIa and IIb with additional hydrogen bonding interactions in IIa due to –OH group of OH-pda2- has been presented. Based on IIa and IIb, the effects of the –OH group on photophysical properties and catalytic activities were then investigated without structural bias. With reference to the UV–vis absorption and phosphorescent emission spectroscopy, the singlet (S1) and triplet (T1) state energies of OH–H2pda (41,600 and 19,200 cm−1), H2pda (48,200 and 23,300 cm−1), OH-pda2- (IIa, 41,400 and 22,500 cm−1) and pda2− (IIb, 47,100 and 23,300 cm−1) were determined from which the influences of the –OH group have been revealed. Important roles of the –OH group as electron-donating group as well as hydrogen bond promoter have been proposed. Catalytic activities of IIa and IIb were comparatively examined using the solvent-free CO2 cycloaddition reaction at atmospheric pressure with epichlorohydrin in the presence of tetrabutylammonium bromide. The inferior performance of IIa (maximum yield of 62(±2)%) to IIb (maximum yield of 68(±2)%) was unexpectedly disclosed and the drawback of the substantial involvement of the catalytic sites in hydrogen bonding interactions has been demonstrated. Their reusability was additionally explored.

Interacting Emission Species among Donor and Acceptor Moieties in a Donor-Grafted Polymer Host/TADF-Guest System and Their Effects on Photoluminescence and Electroluminescence.

Thermally activated delayed fluorescence (TADF)-based electroluminescence (EL) devices adopting a host/guest strategy in their emitting layer (EML) are capable of realizing high efficiency. However, TADF emitters composed of donor and acceptor moieties as guests dispersed in organic host materials containing a donor and/or an acceptor are subject to donor-acceptor (D-A) interactions. In addition, electron delocalization between neighboring emitter molecules could form different species of aggregates. Here, we investigate the effects of intermolecular interacting emission species on the optoelectronic properties of sky-blue/green/red (sB/G/R) TADF emitters as guests using poly(biphenyl-Si/Ge) grafted with various donor moieties as hosts. We found the presence of guest/guest exciplex (Dg/Ag)*, host/guest exciplexes (Dh/Ag)*, and aggregates through the exploration of interactions between neighboring TADF guest molecules and between host and TADF-guest molecules. The nonradiative 3(Dh/Ag)* (ΔEST ≈ 0.5 eV) could increase the internal conversion rate (kIC) and reduce delayed luminescence, and both of them could cause a decrease in PLQY. The luminescence of 3(Dh/Ag)* may have a positive or negative effect on PLQY depending on its triplet energy. As the singlet and triplet energies of (aggregate)* are lower than those of (ICT)*, energy transfer from (ICT)* to (aggregate)* could occur. The low PLQY nature of (aggregate)* means that it is more likely to cause quenching in device emission. The emissions from (Dh/Ag)* and (aggregate)* are found to have increased full width at half-maximum and lead to lower emission color purity. Such intermolecular interactions should also occur in host/guest (TADF) systems and nondoped TADF emitter systems and thus are important factors for the molecular design of the TADF emitter and/or its accompanying host for high device efficiency and emission color purity.

Investigation of the Electronic Structure in GaAs/AlxGa1‐xAs Quantum Dots with Four Electrons

AbstractIn this paper, a detailed analysis of the electronic structure of four‐electron quantum dots is performed with finite confinement potential by a modified variational optimization approach based mainly on the quantum genetic algorithm and the Hartree‐Fock‐Roothaan method. For the ground and higher excited configurations, our analysis covers a range of parameters like the average energies of ground and excited states, singlet and triplet state energies, orbital energies, and two‐electron Coulomb and exchange interaction energies. One‐electron kinetic energy, the Coulomb potential energy between electrons and impurity, the confinement potential energy for the electrons, and the probability of finding an electron inside or outside the quantum well are also studied. The results demonstrate that both spatial confinement and the height of the potential barrier have a pronounced effect on all energies in the strong and intermediate confinement regions, but this influence weakens significantly in large dot radii. The most substantial difference between singlet and triplet energies occurs in the 1s22s2p configurations, with this difference decreasing in higher configurations. Significant increases in the 1s and 2s orbital energies are observed at the dot radii where the 2p, 3d, and 4f electrons from the outermost orbit begin to penetrate the well.

Triad photosensitizers based on iodo-aza-Bodipy and naphthalenediimides (NDI) with broadband absorption: Study of resonance energy transfer and electron transfer

Two organic photosensitizers based on resonance energy transfer (A-1 and A-2) are prepared. Naphthalenediimides was used as intramolecular energy donor and iodo-aza-Bodipy was used as intramolecular energy acceptor/spin converter. A-1 (ε = 42,800 at 618 nm and ε = 59,600 at 674 nm) and A-2 (ε = 33,300 at 514 nm and ε = 68,300 at 674 nm) give the two strong absorption band and both of them show broadband absorption in visible region. The photophysical properties of the compounds were studied with steady state and time-resolved spectroscopy in detail. With steady state and time-resolved spectroscopy, we found that photoexcitation into the energy donor was followed by singlet energy transfer, then via the intersystem crossing (ISC) of the energy acceptor. By nanosecond time-resolved transient absorption spectroscopy and DFT calculation, triplet excited state is localized on the iodo-aza-Bodipy moiety. Quantum yield of singlet oxygen of A-1 and A-2 is 39.7 % and 40.9 %, respectively. Based on fluorescence lifetime quenching, the efficiency of intramolecular energy transfer is estimated to be 15.9 % and 27.7 % for A-1 and A-2. And PET is responsible for the relatively low efficiency, which is identified by the calculation of kcs/kFRET and the Gibbs free energy change (△G0cs). A-1 and A-2 were used for singlet oxygen (1O2) mediated photooxidation of 1,5-dihydroxylnaphthalene and the photosensitizing ability are more efficient than the triplet photosensitizers with the mono-chromophore photosensitizer.

UMRSF-TDDFT: Unrestricted Mixed-Reference Spin-Flip-TDDFT.

An unrestricted version of Mixed-Reference Spin-Flip Time-Dependent Density Functional Theory (UMRSF-TDDFT) was developed based on unrestricted Kohn-Sham orbitals (UKS) with a new molecular orbital (MO) reordering scheme. Additionally, a simple yet accurate method for estimating ⟨S2⟩ expectation values was devised. UMRSF-TDDFT was benchmarked against cases where DFT, TDDFT, and SF-TDDFT traditionally fail to provide accurate descriptions. In an application to the ground and excited states of a Be atom, UMRSF-TDDFT successfully recovers the degenerate states, with its energies slightly reduced compared to its RO counterpart, due to the additional variational flexibility of UKS. A clear difference between UMRSF and U-SF-TDDFT is evident in the bond breaking of the hydrogen fluoride system, as the latter misses an important configuration. In the case of the Jahn-Teller distortion of trimethylenemethane (TMM), the relative singlet energy compared to the triplet is lower by 0.1 and 0.2 eV for UMRSF and U-SF-TDDFT, respectively, than that of MRSF-TDDFT. The reduction in UMRSF energy is attributed to spatial orbital relaxations, whereas the reduction in U-SF-TDDFT energy results from spin contamination. Overall, the additional orbital relaxations afforded by unrestricted Kohn-Sham (UKS) orbitals in UMRSF-TDDFT lead to lower total system energies compared to their restricted open-shell counterparts. This enhancement adds a practical and accurate quantum chemical theory to the existing RO variant for addressing challenging systems where traditional quantum theories suffer.

1,1'-Biolympicenyl: A Stable Non-Kekulé Diradical with a Small Singlet and Triplet Energy Gap.

Dimerization of delocalized polycyclic hydrocarbon radicals is a simple and versatile method to create diradicals with tailored electronic structures and accessible high-spin states. However, the synthesis is challenging, and the stability issue of the diradicals remains a concern. In this study, we present the synthesis of a stable non-Kekulé 1,1'-biolympicenyl diradical 1 using a protection-oxidation-protection strategy. Diradical 1 demonstrated exceptional stability, with a solution half-life time exceeding 3.5 years and a solid state thermal decomposition temperature above 300 °C. X-ray crystallographic analysis revealed its intersected molecular structure and tightly bound dimer configuration. A singlet ground state with a small singlet-triplet energy gap is consistently identified using electron paramagnetic resonance (EPR) and a superconducting quantum interference device (SQUID) in a rigid matrix, and the triplet state is thermally accessible at room temperature. The solution phase properties were systematically examined through EPR, absorption spectroscopy, and cyclic voltammetry, revealing a rotational motion in the slow-motion regime and multistage redox characteristics. This study presents an efficient synthetic and stabilization strategy for organic diradicals, enabling the development of various high-spin functional materials.

Distance-Independent Efficiency of Triplet Energy Transfer from π-Conjugated Organic Ligands to Lanthanide-Doped Nanoparticles.

Lanthanide-doped nanoparticles (LnNPs) possess unique optical properties and are employed in various optoelectronic and bioimaging applications. One fundamental limitation of LnNPs is their low absorption cross-section. This hurdle can be overcome through surface modification with organic chromophores with large absorption cross-sections. Controlling energy transfer from organic molecules to LnNPs is crucial for creating optically bright systems, yet the mechanisms are not well understood. Using pump-probe spectroscopy, we follow singlet energy transfer (SET) and triplet energy transfer (TET) in systems comprising different length 9,10-bis(phenylethynyl)anthracene (BPEA) derivatives coordinated onto ytterbium and neodymium-doped nanoparticles. Photoexcitation of the ligands forms singlet excitons, some of which convert to triplet excitons via intersystem crossing when coordinated to the LnNPs. The triplet generation rate and yield are strongly distance-dependent. Following their generation, TET occurs from the ligands to the LnNPs, exhibiting an exponential distance dependence, independent of solvent polarity, suggesting a concerted Dexter-type process with a damping coefficient of 0.60 Å-1. Nevertheless, TET occurs with near-unity efficiency for all BPEA derivatives due to the lack of other triplet deactivation pathways and long intrinsic triplet lifetimes. Thus, we find that close coupling is primarily important to ensure efficient triplet generation rather than efficient TET. Although SET is faster, we find its efficiency to be lower and more strongly distance-dependent than the TET efficiency. Our results present the first direct distance-dependent energy transfer measurements in LnNP@organic nanohybrids and establish the advantage of using the triplet manifold to achieve the most efficient energy transfer and best sensitization of LnNPs with π-conjugated ligands.

Theoretical investigations on the atmospheric reaction of n-C3H7O2 with ClO radicals

As a key intermediate during propane oxidation, n-propyl peroxy radicals (n-C3H7O2) play significant roles in the atmosphere. In this study the reaction of n-C3H7O2 with chlorine monoxide ClO was studied using quantum chemistry methods. Result shows that addition–elimination, substitution and abstraction mechanisms were located on the singlet and triplet potential energy surfaces (PESs). On the singlet PES, the final products of C2H5CHO + HClO2 and C2H5CHOO + HOCl will be feasible with low or moderate barriers. While on the triplet PES all barriers are too high and can be negligible to the overall reaction. Moreover, it is presumed that the title reaction might be potential source of C2H5CHOO in the atmosphere, especially in the marine boundary layer (MBL) with high ClO concentrations.

Kinetic Study and Reaction Mechanism of the Gas-Phase Thermolysis Reaction of Methyl Derivatives of 1,2,4,5-Tetroxane.

Tetroxane derivatives are interesting drugs for antileishmaniasis and antimalaric treatments. The gas-phase thermal decomposition of 3,6,-dimethyl-1,2,4,5-tetroxane (DMT) and 3,3,6,6,-tetramethyl-1,2,4,5-tetroxane (acetone diperoxide (ACDP)) was studied at 493-543 K by direct gas chromatography by means of a flow reactor. The reaction is produced in the injector chamber at different temperatures. The resulting kinetics Arrhenius equations were calculated for both tetroxanes. Including the parent compound of the series 1,2,4,5-tetroxane (formaldehyde diperoxide (FDP)), the activation energy and frequency factors decrease linearly with the number of methyl groups. The reaction mechanisms of ACDP and 3,6,6-trimethyl-1,2,4,5-tetroxane (TMT) decomposition have been studied by means of the DFT method with the BHANDHLYP functional. Our calculations confirm that the concerted mechanism should be discarded and that only the stepwise mechanism occurs. The critical points of the singlet and triplet state potential energy surfaces (S- and T-PES) of the thermolysis reaction of both compounds have been determined. The calculated activation energies of the different steps vary linearly with the number of methyl groups of the methyl-tetroxanes series. The mechanism for the S-PES leads to a diradical O···O open structure, which leads to a C···O dissociation in the second step and the production of the first acetaldehyde/acetone molecule. This last one yields a second C···O dissociation, producing O2 and another acetone/acetaldehyde molecule. The O2 molecule is in the singlet state. A quasi-parallel mechanism for the T-PES from the open diradical to products is also found. Most of the critical points of both PES are linear with the number of methyl groups. Reaction in the triplet state is much more exothermic than the singlet state mechanism. Transitions from the singlet ground state, S0 and low-lying singlet states S1-3, to the low-lying triplet excited states, T1-4, (chemical excitation) in the family of methyl tetroxanes are also studied at the CASSCF/CASPT2 level. Two possible mechanisms are possible here: (i) from S0 to T3 by strong spin orbit coupling (SOC) and subsequent fast internal conversion to the excited T1 state and (ii) from S0 to S2 from internal conversion and subsequent S2 to T1 by SOC. From these experimental and theoretical results, the additivity effect of the methyl groups in the thermolysis reaction of the methyl tetroxane derivatives is clearly highlighted. This information will have a great impact for controlling these processes in the laboratory and chemical industries.

Electronic Couplings for Triplet-Triplet Annihilation Upconversion in Crystal Rubrene.

Triplet-triplet annihilation photon upconversion (TTA-UC) is a process able to repackage two low-frequency photons into light of higher energy. This transformation is typically orchestrated by the electronic degrees of freedom within organic compounds possessing suitable singlet and triplet energies and electronic couplings. In this work, we propose a computational protocol for the assessment of electronic couplings crucial to TTA-UC in molecular materials and apply it to the study of crystal rubrene. Our methodology integrates sophisticated yet computationally affordable approaches to quantify couplings in singlet and triplet energy transfer, the binding of triplet pairs, and the fusion to the singlet exciton. Of particular significance is the role played by charge-transfer states along the b-axis of rubrene crystal, acting as both partial quenchers of singlet energy transfer and mediators of triplet fusion. Our calculations identify the π-stacking direction as holding notable triplet energy transfer couplings, consistent with the experimentally observed anisotropic exciton diffusion. Finally, we have characterized the impact of thermally induced structural distortions, revealing their key role in the viability of triplet fusion and singlet fission. We posit that our approaches are transferable to a broad spectrum of organic molecular materials, offering a feasible means to quantify electronic couplings.

Indole-imidazole hybrid Schiff base for the selective detection of the explosive picric acid via fluorescence “turn-off” process: Experimental and theoretical DFT-D3 study

A compound containing a heteroatom and Schiff base, 3-(4,5-Diphenyl-1H-imidazol-2-yl)-1H-indole (INBIL) has been synthesized through the one-pot condensation of indole-3-carbaldehyde with benzil in ethanol and characterized using various analytical parameters like FT-IR, NMR; its thermal and chemical stability also established. The synthesized INBIL showed a 'turn off' luminescent property that has been used to detect picric acid. This luminescent sensor has a broad emission band at 415 nm in acetonitrile due to the conjugation of its double bond. It is worth noting that INBIL can be recycled through TEA treatment. The chemosensor exhibited the highest sensitivity with Ksv = 1.51 × 10−6 M, and a detection limit of 2.91 × 10−7 M, with perfect linearity up to 22 µL. The binding stoichiometry ratio between INBIL and picric acid was predicted to be 1:1 using Job's plot, which was confirmed by 1H NMR analysis. Finally, DFT-D3 calculations were used to calculate the excited molecule's singlet and triplet energy states.

On the Dependence of the Rate of Deactivation of Triplet Excitations of a Number of Molecules on Their Ionization Potential and the Charge of the Nucleus of Heavy Atoms of the Solvent

Purpose. Establish the nature and reasons for the dependence of the change in the radiative rate constant of deactivation of triplet excitations of a number of molecules, caused by the effect of an external heavy atom, on their ionization potential from the ground state and the energy of the first excited singlet state.Methods. Kinetic methods were used to determine the rate constant for the deactivation of triplet excitations of organic molecules in solid solutions at 77 K. The solvents were n-heptane (neutral), carbon tetrachloride and benzene bromide (containing heavy chlorine and bromine atoms). The molecules studied were coronene, triphenylene, phenanthrene, naphthalene and biphenyl.Results. A linear relationship has been established between an increase in the ionization potential, the energy value of the first excited singlet state, and an increase in the change in the rate of radiative deactivation of triplet excitations of the studied molecules in carbon tetrachloride. It is shown that the increase in the change in the radiative deactivation rate of these molecules with an increase in their ionization potential is due to a decrease in the difference between the ionization energies and the first excited singlet state.Conclusion. The results of the study showed that there is a linear relationship between the increase in the radiative deactivation rate of triplet excitations of the studied molecules and their ionization potential. A linear relationship is also observed between the increase in the rate of radiative deactivation of triplet excitations of these molecules and the first excited singlet state. As the ionization potentials of the molecules under study increase, the difference between the ionization energy and the energy of the first excited singlet state decreases. This is the reason for the increase in the rate of deactivation of triplet excitations of molecules with an increase in their ionization potential.

Singlet Fission in a New Series of Systematically Designed Through-space Coupled Tetracene Oligomers.

Singlet fission (SF) holds great promise for current photovoltaic technologies, where tetracenes, with their relatively high triplet energies, play a major role for application in silicon-based solar cells. However, the SF efficiencies in tetracene dimers are low due to the unfavorable energetics of their singlet and triplet energy levels. In the solid state, tetracene exhibits high yields of triplet formation through SF, raising great interest about the underlying mechanisms. To address this discrepancy, we designed and prepared a novel molecular system based on a hexaphenylbenzene core decorated with 2 to 6 tetracene chromophores. The spatial arrangement of tetracene units, induced by steric hindrance in the central part, dictates through-space coupling, making it a relevant model for solid-state chromophore organization. We then revealed a remarkable increase in SF quantum yield with the number of tetracenes, reaching quantitative (196 %) triplet pair formation in hexamer. We observed a short-lived correlated triplet pair and limited magnetic effects, indicating ineffective triplet dissociation in these through-space coupled systems. These findings emphasize the crucial role of the number of chromophores involved and the interchromophore arrangement for the SF efficiency. The insights gained from this study will aid designing more efficient and technology-compatible SF systems for applications in photovoltaics.

Singlet Fission in a New Series of Systematically Designed Through‐space Coupled Tetracene Oligomers

AbstractSinglet fission (SF) holds great promise for current photovoltaic technologies, where tetracenes, with their relatively high triplet energies, play a major role for application in silicon‐based solar cells. However, the SF efficiencies in tetracene dimers are low due to the unfavorable energetics of their singlet and triplet energy levels. In the solid state, tetracene exhibits high yields of triplet formation through SF, raising great interest about the underlying mechanisms. To address this discrepancy, we designed and prepared a novel molecular system based on a hexaphenylbenzene core decorated with 2 to 6 tetracene chromophores. The spatial arrangement of tetracene units, induced by steric hindrance in the central part, dictates through‐space coupling, making it a relevant model for solid‐state chromophore organization. We then revealed a remarkable increase in SF quantum yield with the number of tetracenes, reaching quantitative (196 %) triplet pair formation in hexamer. We observed a short‐lived correlated triplet pair and limited magnetic effects, indicating ineffective triplet dissociation in these through‐space coupled systems. These findings emphasize the crucial role of the number of chromophores involved and the interchromophore arrangement for the SF efficiency. The insights gained from this study will aid designing more efficient and technology‐compatible SF systems for applications in photovoltaics.

Ultrafast energy transfer dynamics in CsPbBr3 nanoplatelets-BODIPY heterostructure.

Understanding and directing the energy transfer in nanocrystals-chromophore heterostructure is critical to improve the efficiency of their photocatalytic and optoelectronic applications. In this work, we studied the energy transfer process between inorganic-organic molecular complexes composed of cesium halide perovskite nanoplatelets (CsPbBr3 NPLs) and boron dipyrromethene (BODIPY) by photoluminescence spectroscopy (PL), time-correlated single photon-counting (TCSPC) and femtosecond transient absorption spectroscopy. The quenching of PL in CsPbBr3 NPLs occurred simultaneously with the PL enhancement of BODIPY implied the singlet energy transfer process. The rate of energy transfer has been determined by transient absorption spectrum as kET = 3.8 × 109 s-1. The efficiency of Förster energy transfer (FRET) has been quantitatively calculated up to 70%. Our work advances the understanding of the interaction between BODIPY and perovskite nanoplatelets, providing a new solution based on their optoelectronic and photocatalytic applications.

Modulation of lanthanide luminescence by carbamoylmethylphosphine oxide ligand: A theoretical study

The antenna capacity of Phenacyldiphenylphosphine oxide (Phenac), combining C=O and P=O donor groups was established by theoretical examination of its chromophore properties, binding ability to encapsulate and stabilize lanthanide complexes and potential to sensitize the EuIII and TbIII luminescence in Eu(Phenac)2(NO3)3(H2O) (1), Eu(Phenac)2(NO3)3 (2), Eu(Phenac)3(NO3)3 (3) and Tb(Phenac)2(NO3)3(H2O) (4) complexes in vacuum, solution and solid phase. The ligand-centered singlet and triplet excited state energies, the rates and lifetimes for the rival nonradiative (S1→T1,2 intersystem crossing (ISC)) and radiative and nonradiative S1→S0 and T1→S0 relaxation were predicted by means of DFT/TDDFT/ωB97XD calculations. Similar relaxation paths were found for all complexes. The absorbed energy by Sn > 1(π-π*) states relaxed to T1min by major ISC mechanism S1→T2→T1. The long radiative lifetime of S1→S0 due to n(p(C)(O))π-π*,p(P) character facilitated the forward ISC process. The environment, Phenac's number and LnIII size affect the T1 energy ∼0.1 eV. The calculated (Phenac→EuIII) energy transfer rates suggested the most likely T1 → 5D1/5D0 channels for a population of emitting metal-centered states. The small Φ of EuIII and larger luminescence of TbIII were discussed and explained. The importance of the P=O and C=O groups for the coordination ability and absorption properties of Phenac has been elucidated.

Photoisomerization of (Cyanomethylene)cyclopropane (C5H5N) to 1-Cyano-2-methylenecyclopropane in an Argon Matrix.

Broad-band ultraviolet photolysis (λ > 200 nm) of (cyanomethylene)cyclopropane (5) in an argon matrix at 20 K generates 1-cyano-2-methylenecyclopropane (7), a previously unknown compound. This product was initially identified by comparison of its infrared spectrum to that predicted by an anharmonic MP2/6-311+G(2d,p) calculation. This assignment was unambiguously confirmed by the synthesis of 1-cyano-2-methylenecyclopropane (7) and observation of its authentic infrared spectrum, which proved identical to that of the observed photoproduct. We investigated the singlet and triplet potential energy surfaces associated with this isomerization process using density functional theory and multireference calculations. The observed rearrangement of compound 5 to compound 7 is computed to be endothermic (3.3 kcal/mol). We were unable to observe the reverse reaction (7 → 5) under the photochemical conditions.