Endpoint Deviation Research Articles

An in vitro model study of the accuracy and operation time of oral surgery robot-assisted endodontic microsurgery

Objective: To explore the operational accuracy and operative time of oral surgery robot-assisted endodontic microsurgery on a head-simulator for clinical reference. Methods: Three pairs of surgical simulation models were set up on head-simulator. Each model included 10 positions anteriorly and posteriorly, 20 teeth for each technique, for a total of 60 teeth. An attending physician with more than 3 years clinical experience in endodontic microsurgery completed fixed-point osteotomy and apicoectomy in three groups of endodontic microsurgery under freehand (FH), static navigation (SN), and surgery robot (SR). The duration of each operation was recorded. Cone-beam CT was taken before the operation and the surgical path was planned in the software; after surgery, a plug gauge (precision gauge for measuring hole dimensions) was inserted into the surgical path for intraoral scanning. Surgical accuracy (starting point, end point, and angular deviation) was assessed in all 3 groups, and surgery time was compared. Results: The deviation at the starting point and the end point, and angular deviation was (0.37±0.11), (0.37±0.10) mm, and 0.71°±0.17°in the SR group. The deviations in the SR group were significantly lower than those in the SN group [(0.59±0.14), (0.65±0.18) mm, and 2.64°±0.75°] (P<0.05), and both groups were significantly lower than the FH group [(1.37±0.31), (1.10±0.21) mm, and 9.84°±3.15°] (P<0.05). The operative time in the SN group [(1.20±0.03) min] was significantly less than that in the SR group [(2.18±0.03) min] (P<0.05), and both groups were significantly less than that in the FH group [(8.70±3.15) min] (P<0.05). Starting point deviation, end point deviation, and angular deviation [(1.09±0.10), (0.90±0.07) mm, 7.22°±1.13°] in anterior teeth using the FH was significantly lower than the starting deviation, endpoint deviation, and angular deviation [(1.65±0.14), (1.30±0.06) mm, 12.46°±2.10°] in the posterior teeth using FH (P<0.05), and the operative time in the anterior teeth using the FH [(5.75±0.57) min] was significantly less than that in the posterior teeth using [(11.65±1.14) min] (P<0.05). The difference in accuracy and operative time between using SN and SR on anterior and posterior teeth was not statistically significant (P>0.05). Conclusions: Oral surgery robot-assisted endodontic microsurgery helps improving the accuracy of clinicians' operations and shorten the operation time.

Clinical study of immediate implant placement in posterior maxillary region assisted by dynamic real-time navigation: A randomized controlled trial

ObjectiveTo evaluate the accuracy of the implant accuracy and clinical effect of navigation-assisted immediate implant placement (IIP) in the posterior maxillary tooth region. MethodsThis study included 60 patients with 96 implants undergoing IIP in the posterior maxillary region from January 2021 to December 2022, stratified into dynamic navigation and freehand implant groups. All clinical indicators, including initial stability, implant deviation (entry point deviation, end point deviation, depth deviation and angle deviation), marginal bone resorption and implant success rate, were systematically recorded. ResultsAll implants were successfully placed with an average torque of (24.38 ± 1.84)N.cm. The mean entry point deviation, apex point deviation and angular deviation in the navigation group were significantly smaller than that of the freehand group (P < 0.05). Marginal bone resorption was significantly less in the navigated group than in the freehand group (P < 0.05). All dental implants were considered an operational success and the mean follow-up time was (27.8 ± 8.4) months. ConclusionThe application of dynamic navigation-assisted immediate implant placement in the maxillary posterior region can achieve good implant accuracy and satisfactory clinical results.

Analysis of the Application Value of Dynamic Navigation Guidance in Oral Implantation.

To investigate the application of dynamic navigation guidance technology in different implantation scenarios, and to provide a scientific basis for the innovation and advancement of implantation techniques. Fifteen cases of patients with malocclusions admitted between January 2021 and February 2023 were selected as the study subjects. All patients underwent dynamic navigation-guided oral implantation interventions. CBCT scans were taken after implantation surgery to record deviations of implantation points, including implantation point deviation, endpoint deviation, and angle deviation. Dynamic navigation guidance effectively improves the reliability and stability of implantation in oral implant patients. CBCT effectively evaluated the state of the patient's periodontal implant, analyzed the state of the patient's lesion area, and improved the quality of implant intervention through CBCT guidance. The implantation point deviation was (0.407±0.193) mm, the endpoint deviation was (0.492±0.201) mm, and the implant angle deviation was (2.162±0.283)°. There was no significant difference in implantation point deviation in the anterior and posterior parts of the upper and lower jaws after intervention (P>0.05). However, there were significant differences in endpoint deviation and implant angle deviation among the anterior and posterior parts of the upper and lower jaws (P<0.05). Dynamic navigation guidance effectively improves the reliability and stability of implantation in oral implant patients. However, there is relatively greater endpoint deviation and implant angle deviation in the posterior part of the upper jaw.

Visual and vestibular integration in Parkinson's disease while walking

Postural control requires effective sensory integration. People with Parkinson's disease (PD) are reported to have impaired visual and vestibular perception. While self-motion perception is a key aspect of locomotion, visual-vestibular integration has not been directly characterized in people with PD during gait. We compared the ability of people with PD and healthy older adults (OA) to integrate multi-sensory information during straight-line walking in response to visual and vestibular perturbations, using continuous translations of the visual surround and galvanic vestibular stimulation within a virtual reality environment. We measured their endpoint deviations from midline and changes in gait parameters. We found that people with PD deviated more than OA when walking in a dark environment but did not show differences in deviations when walking in a virtual room with visual information. With visual and vestibular perturbations, people with PD did not differ from OA in endpoint deviations nor variabilities. However, people with PD did not adopt a more cautious gait when GVS was applied in a virtual room, unlike OA. Overall, we showed that people with mild PD did not perform worse than OA but did show differences in gait patterns, suggesting that visual-vestibular integration is relatively preserved during gait in PD.

A prospective cohort study on the association between new falls and balancing ability among older adults over 80 years who are independent

ObjectiveThe purpose of this study was to prospectively investigate the relationship between new falls and the balancing ability of older adults aged ≥80 years who are independent and evaluate the validity of the assessment tools as a predictor of falls. MethodsWe enrolled a total of 160 participants (104 males and 56 females) aged 80 years or older. During the 12 months of observation, we investigated underlying diseases and drug use and performed a comprehensive geriatric assessment (including self-care ability, muscle strength, action ability, cognition, emotional state, and other aspects), as well as computerized dynamic posturography to assess balance and gait functions. We further analyzed the relationship between new falls and multiple internal risk factors. ResultsA total of 159 participants were included for statistical analysis, and there were 108 new falls among the 59 participants. Fall history and visual preference (PREF) scores on the sensory integration test showed a positive correlation with new falls. The composite equilibrium score (SOTcom), left total hip bone mineral density, left directional control, and end point deviation were all found to be negatively correlated with new falls (P < 0.05). The cut-off point of the timed “up and go” test (TUG) in predicting new falls in this cohort was >12.03 s, with a sensitivity of 78.0 %, a specificity of 51.5 %, and an AUC of 0.667 (P < 0.001, 95 % CI: 0.567–0.721). The cut-off point of SOTcom in predicting new falls was ≤52, with a sensitivity of 40.7 %, a specificity of 84.0 %, and an AUC of 0.606 (P = 0.028, 95 % CI: 0.525–0.682). ConclusionsThe decline of balance sensory input function (mainly vestibular and visual sense), skeletal muscle motor function, and related postural control ability constituted the main risk factors for new falls in older adults who were independent. The combined use of TUG and SOT was useful in further improving the accuracy of predicting new falls in this population and providing a direction for effective intervention and rehabilitation measures.

Accuracy of computer-aided static and dynamic navigation systems in the placement of zygomatic dental implants

BackgroundZygomatic implants are widely used in the rehabilitation of severely atrophic maxillae, but implant placement is not without risks, and it can potentially cause damage to related anatomical structures. The aim of this study was to perform a comparative analysis of the accuracy of static navigation systems in placing zygomatic dental implants in comparison to dynamic navigation systems.MethodsSixty zygomatic dental implants were randomly allocated to one of three study groups, categorized by which implant placement strategy was used: A: computer-aided static navigation system (n = 20) (GI); B: computer-aided dynamic navigation system (n = 20) (NI); or C: free-hand technique (n = 20) (FHI). For the computer-aided study groups, a preoperative cone-beam computed tomography (CBCT) scan of the existing situation was performed in order to plan the approach to be used during surgery. Four zygomatic dental implants were inserted in each of fifteen polyurethane stereolithographic models (n = 15), with a postoperative CBCT scan taken after the intervention. The pre- and postoperative CBCT scans were then uploaded to a software program used in dental implantology to analyze the angular deviations, apical end point, and coronal entry point. Student’s t-test was used to analyze the results.ResultsThe results found statistically significant differences in apical end-point deviations between the FHI and NI (p = 0.0053) and FHI and GI (p = 0.0004) groups. There were also statistically significant differences between the angular deviations of the FHI and GI groups (p = 0.0043).ConclusionsThe manual free-hand technique may enable more accurate placement of zygomatic dental implants than computer-assisted surgical techniques due to the different learning curves required for each zygomatic dental implant placement techniques.

Development and Clinical Trial of a New Orthopedic Surgical Robot for Positioning and Navigation.

Robot-assisted orthopedic surgery has great application prospects, and the accuracy of the robot is the key to its overall performance. The aim of this study was to develop a new orthopedic surgical robot to assist in spinal surgeries and to compare its feasibility and accuracy with the existing orthopedic robot. A new type of high-precision orthopedic surgical robot (Tuoshou) was developed. A multicenter, randomized controlled trial was carried out to compare the Tuoshou with the TiRobot (TINAVI Medical Technologies Co., Ltd., Beijing) to evaluate the accuracy and safety of their navigation and positioning. A total of 112 patients were randomized, and 108 patients completed the study. The position deviation of the Kirschner wire placement in the Tuoshou group was smaller than that in the TiRobot group (p = 0.014). The Tuoshou group was better than the TiRobot group in terms of the pedicle screw insertion accuracy (p = 0.016) and entry point deviation (p < 0.001). No differences were observed in endpoint deviation (p = 0.170), axial deviation (p = 0.170), sagittal deviation (p = 0.324), and spatial deviation (p = 0.299). There was no difference in security indicators. The new orthopedic surgical robot was highly accurate and optimized for clinical practice, making it suitable for clinical application.

Accuracy of Dynamic Navigation for Non-Surgical Endodontic Treatment: A Systematic Review.

In recent years, the application of Guided Endodontics has gained interest for non-surgical endodontic treatment and retreatment. The newest research focuses on the accuracy of Dynamic Navigation (DN). This article systematically reviewed existing data on the accuracy of non-surgical endodontic treatment procedures that were completed using DN. Following the PRISMA criteria, an electronic database search was conducted in PubMed, Web of Science, Scopus, and Cochrane Library. Studies comparing the accuracy of non-surgical endodontic treatment using DN and the conventional freehand technique were eligible. The literature search resulted in 176 preliminary records. After the selection process six studies were included. The risk of bias was evaluated using the modified Cochrane Collaboration Risk of Bias 2.0 tool. Five studies examined the aid of DN for planning and executing endodontic access cavities, and one for fiber post removal. In two studies, endodontic access cavities were performed in teeth with pulp canal obliteration. The main outcomes that were measured in the included studies were preparation time, global coronal entry point and apical endpoint deviations, angular deviation, tooth substance loss, qualitative precision, number of unsuccessful attempts or procedural mishaps. The risk of bias was rated from low to raising some concerns. Overall, DN showed increased accuracy compared to the freehanded technique and could be especially helpful in treating highly difficult endodontic cases. Clinical studies are needed to confirm the published in vitro data.

Accuracy of a Computer-Aided Dynamic Navigation System in the Placement of Zygomatic Dental Implants: An In Vitro Study.

The objective of this in vitro study was to evaluate and compare the accuracy of zygomatic dental implant (ZI) placement carried out using a dynamic navigation system. Materials and Methods: Forty (40) ZIs were randomly distributed into one of two study groups: (A) ZI placement via a computer-aided dynamic navigation system (n = 20) (navigation implant (NI)); and (B) ZI placement using a conventional free-hand technique (n = 20) (free-hand implant (FHI)). A cone-beam computed tomography (CBCT) scan of the existing situation was performed preoperatively to plan the surgical approach for the computer-aided study group. Four zygomatic dental implants were placed in anatomically based polyurethane models (n = 10) manufactured by stereolithography, and a postoperative CBCT scan was performed. Subsequently, the preoperative planning and postoperative CBCT scans were added to dental implant software to analyze the coronal entry point, apical end point, and angular deviations. Results were analyzed using the Student’s t-test. Results: The results showed statistically significant differences in the apical end-point deviations between FHI and NI (p = 0.0018); however, no statistically significant differences were shown in the coronal entry point (p = 0.2617) or in the angular deviations (p = 0.3132). Furthermore, ZIs placed in the posterior region showed more deviations than the anterior region at the coronal entry point, apical end point, and angular level. Conclusions: The conventional free-hand technique enabled more accurate placement of ZIs than the computer-assisted surgical technique. In addition, placement of ZIs in the anterior region was more accurate than that in the posterior region.

An in vitro model study of computer-guided endodontic microsurgery

Objective: To assess and compare the accuracies and operating time of endodontic microsurgery performed by operators with different levels of experience in endodontics using computer-guided techniques including dynamic and static navigations in a surgical simulation model. Methods: Six pairs of three dimensional (3D)-printed models of upper and lower jaws were set up on dental manikins. A total of 120 teeth (10 teeth each jaw) were included in the models. Microsurgeries of osteotomy and root-resection were performed on the models by two operators with different experience, namely novices and experts, under of free hand (FH)(n=20), dynamic navigation (DN)(n=20), and static navigation (SN)(n=20) conditions, respectively. The duration of each operation was recorded. Cone-beam CT was taken for 3D-printed models before and after the operation. The path of preoperative surgery planning was simulated. The linear deviations at the entry and the end point and the angular deviation of the access path between the simulated and the actual operation were compared by the software. Results: Significant difference of the entry deviation was observed between the novices and the experts in the FH group [(1.44±0.49) and (1.02±0.58) mm] (q=4.67, P=0.020). There were no significant differences between the novices and the experts in the end point and angular deviations (P>0.05). For the novices, the entry deviations in both DN and SN groups [(0.76±0.32) and (0.66±0.20) mm] were significantly lower than those in FH group (q=7.58, P<0.001; q=8.66, P<0.001). The angular deviations in the abovementioned two groups (5.0°±3.5°, 3.9°±2.1°) were significantly lower than that in FH group (10.9°±6.1°) (q=7.38, P<0.001; q=8.70, P<0.001). For the experts, significant differences were found only in the angular deviations among DN, SN and FH groups (3.6°±1.9°, 3.2°±1.7° and 8.2°±3.9°) (q=5.74, P=0.001; q=6.29, P<0.001). The operation durations were significantly shortened for both the novices [(4.80±2.15), (1.09±0.48) min] (q=14.60, P<0.001; q=20.10, P<0.001) and the experts [(3.40±1.96),(1.02±0.34) min] (q=5.86, P<0.001; q=9.37, P<0.001) by using DN and SN techniques. Regarding the differences between tooth types, in FH group, the operating time on the anterior teeth was significantly shorter than that on the posterior teeth (q=8.14, P<0.001; q=5.20, P=0.007), while in DN and SN groups, there were no significant differences in the operating time between two tooth types (P>0.05). No significant differences were discovered in the accuracies on the anterior and posterior teeth among three techniques or between two kinds of operators (P>0.05). Conclusions: Dynamic and static navigation techniques could assist the clinicians, especially the novices, to improve the accuracies and shorten the operating time of osteotomy and root resection microsurgeries.

A Comparative Analysis of the Piezoelectric Ultrasonic Appliance and Trephine Bur for Apical Location: An In Vitro Study.

To compare and contrast the accuracy of piezoelectric ultrasonic insert (PUI) and trephine bur (TB) osteotomy site preparation techniques for apical location. (1) Material and methods: A total of 138 osteotomy site preparations were randomly distributed into one of two study groups. Group A: TB technique (n = 69) and B: PUI technique (n = 69). A preoperative cone-beam computed tomography scan and an intraoral scan were performed and uploaded to implant-planning software to plan the virtual osteotomy site preparations for apical location. Subsequently, the osteotomy site preparations were performed in the experimental models with both osteotomy site preparation techniques and a postoperative CBCT scan was performed and uploaded into the implant-planning software and matched with the virtually planned osteotomy site preparations to measure the deviation angle and horizontal deviation as captured at the coronal entry point and apical end-point between osteotomy site preparations using Student’s t-test statistical analysis. (2) Results: The paired t-test found statistically significant differences at the coronal entry-point deviations (p = 0.0104) and apical end-point deviations (p = 0.0104) between the TB and PUI study groups; however, no statistically significant differences were found in the angular deviations (p = 0.309) between the trephine bur and piezoelectric ultrasonic insert study groups. (3) Conclusions: The results showed that the TB is more accurate than the PUI for apical location.

Linking Pupil Size Modulated by Global Luminance and Motor Preparation to Saccade Behavior

Saccades are rapid eye movements that are used to move the high acuity fovea in a serial manner in the exploration of the visual scene. Stimulus contrast is known to modulate saccade latency and metrics possibly via changing visual activity in the superior colliculus (SC), a midbrain structure causally involved in saccade generation. However, the quality of visual signals should also be modulated by the amount of lights projected onto the retina, which is gated by the size of the pupil. Although absolute pupil size should modulate visual signals and in turn affect saccade responses, research examining this relationship is very limited. Besides, pupil size is associated with motor preparation. However, the role of pupil dilation in saccade metrics remains unexplored. Through varying peripheral background luminance level and target visual contrast in the saccade task, we investigated the role of absolute pupil size and baseline-corrected pupil dilation in saccade latency and metrics. Higher target detection accuracy was obtained with lower background luminance level, and larger absolute pupil diameter correlated with smaller saccade amplitude and higher saccade peak velocities. More interestingly, the comparable modulation between pupil dilation and stimulus contrast was obtained, showing larger pupil dilation (or higher contrast stimuli) correlating with faster saccade latencies, larger amplitude, higher peak velocities, and smaller endpoint deviation. Together, our results demonstrated the influence of absolute pupil size induced by global luminance level and baseline-corrected pupil dilation associated with motor preparation on saccade latency and metrics, implicating the role of the SC in this behavior.

Influence of the Computer-Aided Static Navigation Technique on the Accuracy of the Orthodontic Micro-Screws Placement: An In Vitro Study.

To analyze the influence of the computer-aided static navigation technique on the accuracy of placement of orthodontic micro-screws. One hundred and thirty-eight orthodontic micro-screws were randomly assigned to the following study groups: Group A. orthodontic micro-screw placement using a computer-aided static navigation technique (n = 69); B. orthodontic micro-screw placement using the conventional freehand technique (n = 69). In addition, the accuracy in the canine–premolar, premolar and molar sectors was analyzed in each study group. Cone-beam computed tomography and intraoral scans were taken both prior and subsequent to orthodontic micro-screw placement. The images were then uploaded using a 3D implant planning software, where the deviation and horizontal angles were analyzed using a multivariate linear model. These measurements were taken at the coronal entry point and apical endpoint between the planned orthodontic micro-screws. In addition, any complications resulting from micro-screw placement, such as spot perforations, were also analyzed in all dental sectors. The statistical analysis showed significant differences between the two study groups with regard to the coronal entry-point, apical end-point (p < 0.001) and angular deviations (p < 0.001) between the computer-aided static navigation technique and freehand technique study groups. Moreover, statistically significant differences were showed between the different dental sectors (p < 0.001). Additionally, twelve root perforations were observed at the conventional free hand technique study group while there were no root perforations in the computer-aided static navigation technique study group. The results showed that the computer-aided static navigation technique enables a more accurate orthodontic micro-screw placement with less intraoperative complications when compared with the conventional freehand technique.

A novel dynamic electromagnetic tracking navigation system for distal locking of intramedullary nails

BackgroundThe accurate distal locking of intramedullary (IM) nails is a clinical challenge for surgeons. Although many navigation systems have been developed, a real-time guide method with free radiation exposure, better user convenience, and high cost performance has not been proposed. MethodsThis paper aims to develop an electromagnetic navigation system named TianXuan-MDTS that provides surgeons with a proven surgical solution. And the registration method with external landmarks for IM nails and calibration algorithm for guiders were proposed. A puncture experiment, model experiments measured by 3D Slicer and cadaver experiments (2 cadaveric leg specimens and 6 drilling operations) are conducted to evaluate its performance and stability. ResultsThe registration deviations (TRE) is 1.05± 0.13 mm. In the puncture experiment, a success rate of 96% can be achieved in 45.94 s. TianXuan-MDTS were evaluated on 3 tibia model. The results demonstrated that all 9 screw holes were successfully prepared at a rate of 100% in 91.67 s. And the entry point, end point, and angular deviations were 1.60±0.20 mm, 1.47±0.18 mm, and 3.10±0.84°, respectively. Postoperative fluoroscopy in cadaver experiments showed that all drills were in the distal locking holes, with a success rate of 100% and the average time 143.17± 18.27 s. ConclusionsThe experimental results indicate that our system with novel registration and calibration methods could serve as a feasible and promising tool to assist surgeons during distal locking.

Modulation of saccade trajectories during sequential saccades.

The planning and execution of sequential saccades can overlap in time, and abrupt changes in neural activity in the oculomotor system can alter the normal trajectory of saccades. In this study, we analyzed saccade trajectories to assess the combined programming of sequential saccades. In two separate psychophysical experiments, subjects were instructed to make a sequence of two saccades. The results showed modulation of saccade curvature by the direction and amplitude of both the preceding and following saccade: saccade curvature is modulated in the direction of preceding saccades and away from the direction of following saccades. Moreover, larger preceding and following saccades have stronger effects on curvature. These results support the idea that sequential saccades are programmed concurrently. Finally, the amount of saccade curvature is correlated with the deviation of saccade start and end points, and the time of maximum deviation of saccade trajectories is highly consistent in both experiments. Based on this, we propose a novel benefit for the modulation of saccade trajectories by the oculomotor system: minimizing the saccadic error in sequential saccades.NEW & NOTEWORTHY We show that in saccade sequences, saccade trajectory is modulated in the direction of the preceding saccade and away from the following saccade. The magnitude of this effect is correlated with preceding and following saccade amplitude. This confirms that programming of sequential saccades overlaps. Curvature is also correlated with the deviation of saccade start and end points. Thus, we propose a novel benefit for the modulation of saccade trajectories: minimizing end point error in sequential saccades.

To look or not to look: Subliminal abruptonset cues influence constrained free-choice saccades.

Subliminal cues have been shown to capture attention and modulate manual response behaviour but their impact on eye movement behaviour is not well-studied. In two experiments, we examined if subliminal cues influence constrained free-choice saccades and if this influence is under strategic control as a function of task-relevancy of the cues. On each trial, a display containing four filled circles at the centre of each quadrant was shown. A central coloured circle indicated the relevant visual field on each trial (Up or Down in Experiment 1; Left or Right in Experiment 2). Next, abrupt-onset cues were presented for 16 ms at one of the four locations. Participants were then asked to freely choose and make a saccade to one of the two target circles in the relevant visual field. The analysis of the frequency of saccades, saccade endpoint deviation and saccade latency revealed a significant influence of the relevant subliminal cues on saccadic decisions. Latency data showed reduced capture by spatiallyirrelevant cues under some conditions. These results indicate that spatial attentional control settings as defined in our study could modulate the influence of subliminal abrupt-onset cues on eye movement behaviour. We situate the findings of this study in the attention-capture debate and discuss the implications for the subliminal cueing literature.

Motor-Equivalent Intersegmental Coordination Is Impaired in Chronic Stroke

Background. Kinematic abundance permits using different movement patterns for task completion. Individuals poststroke may take advantage of abundance by using compensatory trunk displacement to overcome upper limb (UL) movement deficits. However, movement adaptation in tasks requiring specific intersegment coordination may remain limited. Objective. We tested movement adaptation in both arms of individuals with chronic stroke (n = 16) and nondominant arms of controls (n = 12) using 2 no-vision reaching tasks involving trunk movement (40 trials/arm). Methods. In the “stationary hand task” (SHT), subjects maintained the hand motionless over a target while leaning the trunk forward. In the “reaching hand task” (RHT), subjects reached to the target while leaning forward. For both tasks, trunk movement was unexpectedly blocked in 40% of trials to assess the influence of trunk movement on adaptive arm positioning or reaching. UL sensorimotor impairment, activity, and sitting balance were assessed in the stroke group. The primary outcome measure for SHT was gain (g), defined as the extent to which trunk displacement contributing to hand motion was offset by appropriate changes in UL movements (g = 1: complete compensation) and endpoint deviation for RHT. Results. Individuals poststroke had lower gains and greater endpoint deviation using the more-affected compared with less-affected UL and controls. Those with less sensorimotor impairment, greater activity levels, and better sitting balance had higher gains and smaller endpoint deviations. Lower gains were associated with diminished UL adaptability. Conclusions. Tests of condition-specific adaptability of interjoint coordination may be used to measure UL adaptability and changes in adaptability with treatment.

No Evidence That Frontal Eye Field tDCS Affects Latency or Accuracy of Prosaccades.

Transcranial direct current stimulation (tDCS) may be used to directly affect neural activity from outside of the skull. However, its exact physiological mechanisms remain elusive, particularly when applied to new brain areas. The frontal eye field (FEF) has rarely been targeted with tDCS, even though it plays a crucial role in control of overt and covert spatial attention. Here, we investigate whether tDCS over the FEF can affect the latency and accuracy of saccadic eye movements. Twenty-six participants performed a prosaccade task in which they made eye movements to a sudden-onset eccentric visual target (lateral saccades). After each lateral saccade, they made an eye movement back to the center (center saccades). The task was administered before, during, and after anodal or cathodal tDCS over the FEF, in a randomized, double-blind, within-subject design. One previous study (Kanai et al., 2012) found that anodal tDCS over the FEF decreased the latency of saccades contralateral to the stimulated hemisphere. We did not find the same effect: neither anodal nor cathodal tDCS influenced the latency of lateral saccades. tDCS also did not affect accuracy of lateral saccades (saccade endpoint deviation and saccade endpoint variability). For center saccades, we found some differences between the anodal and cathodal sessions, but these were not consistent across analyses (latency, endpoint variability), or were already present before tDCS onset (endpoint deviation). We tried to improve on the design of Kanai et al. (2012) in several ways, including the tDCS duration and electrode montage, which could explain the discrepant results. Our findings add to a growing number of null results, which have sparked concerns that tDCS outcomes are highly variable. Future studies should aim to establish the boundary conditions for FEF-tDCS to be effective, in addition to increasing sample size and adding additional controls such as a sham condition. At present, we conclude that it is unclear whether eye movements or other aspects of spatial attention can be affected through tDCS of the frontal eye fields.

A retrospective pilot study comparing data from monitoring reports to identify staffing influence on protocol deviation rates

&lt;p class="abstract"&gt;&lt;strong&gt;Background:&lt;/strong&gt; Clinical research sites are hiring more non-licensed personnel to coordinate clinical trials and to replace licensed nurse counterparts. Revised regulatory documents heavily emphasize research staff training and research activity delegation of authority. &lt;em&gt;The Scope and Standards of Practice for Clinical Research Nursing&lt;/em&gt;, published by the American Nurses’ Association and based on role delineation studies for nurses, is the guidance document for clinical research nurses participating in research activities. Policy making related to research activity delegation of authority would be informed by data that correlate protocol deviation rates with licensure and education of research staff. Protocol deviations can lead to invalid clinical trial results, adverse events, and ethical concerns related to participant risk exposure. Outcome data are lacking, which directly compare frequency of protocol deviations by licensed nurse study coordinators to deviation rates of non-licensed study coordinators.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Methods:&lt;/strong&gt; This pilot study reviewed 45 monitoring reports for 3 clinical research studies and associated research sites staffed with licensed RN study coordinators and research sites staffed with non-licensed, non-RN study coordinators to compare deviation rates related to informed consent, protocol endpoints, participant eligibility and adverse events.&lt;/p&gt;&lt;p class="abstract"&gt;&lt;strong&gt;Results:&lt;/strong&gt; We identified 101 deviations. Adverse event and endpoint deviations were the highest frequency. Differences were evident in overall deviation rates; however, specific deviation comparisons failed to show statistical significance due to low sample size. &lt;/p&gt;&lt;p&gt;&lt;strong&gt;Conclusions:&lt;/strong&gt; This study illustrates a useful method for planning future studies using monitoring reports for deviation tracking and comparison across staffing levels.&lt;/p&gt;

Negative versus positive priming: When are distractors inhibited?

Visual attention is guided by the history of selections in previous trials, an effect usually referred to as intertrial priming. The aim of the present study was to investigate whether such priming in visual search is due to a strengthening of the target signal, or the suppression of the distractor signal. In two experiments, we examined the deviation of saccade endpoints in situations in which the target and distractors were presented in relative close proximity. We found both negative and positive priming, irrespective of whether the repeating feature was relevant or irrelevant. This finding is in contrast to previous results with this paradigm, based on which we concluded that visual priming is strictly the result of boosting perceptual target signals. Based on the differences between these experiments, we conclude that the number of distractors is essential in observing negative priming. We propose that negative priming is solely observed when multiple distractors result in either strong inhibition of distractor features, or strong adaptation to them. Whereas positive priming seems to be a robust mechanism, negative priming is only present if there are multiple distractors.