Empty Sites Research Articles

The Ordered Structures Formed by Janus-like Particles on a Triangular Lattice.

The formation of ordered structures by Janus-like particles, composed of two parts (A and B), with orientation-dependent interactions on a triangular lattice was studied using Monte Carlo methods. The assumed lattice model allows each particle to take on one of the six orientations. The interaction between the A parts of neighboring particles was assumed to be attractive, while the AB and BB interactions were assumed to be repulsive. Moreover, it was assumed that the interaction between a pair of neighboring particles depended on the degrees to which their AA, AB, and BB parts face each other. It was shown that several ordered phases of different densities and structures may appear, depending on the magnitudes of AB and BB interactions. In particular, we found several structures composed of small clusters consisting of three (OT), four (OR), and seven (S) particles, surrounded by empty sites, the lamellar phases (OL, OL1, and OL3), the structures with hexagonal symmetry (R3×3 and K), as well as the structures with more complex symmetry (R5×5 and LAD). Several phase diagrams were evaluated, which demonstrated that the stability regions of different ordered phases are primarily determined by the strengths of repulsive AB and BB interactions.

Enhancement of persistence in the rock-paper-scissors dynamics through higher-order interactions

Higher-order interactions (HOIs) are ubiquitous in real systems, and HOIs among individuals complicate the exploration of species diversity for populations in ecosystems. Therefore, understanding how higher-order interactions affect biodiversity is essential but poses significant challenges. In this paper, we consider higher-order interactions in the competitive processes of spatial rock-paper-scissors (RPS) dynamics, specifically within spatially embedded hyper-lattices, and investigate what biodiversity can be driven by HOIs. Considering hyperedges, species in hyperedges can be different, and different relationships are considered, which can eventually demonstrate the strength of competition. With the competition intensity modulated by the sensitivity of HOIs, extensive simulations have shown that higher-order competitive processes can promote coexistence. We also found that stratification of species densities occurs when three species coexist due to HOIs, which are closely related to the increase of empty sites and disordered spiral entanglement. From investigating the extinction probability in a broad aspect, it has been found that, even if HOIs are working, the coexistence in the system is eventually broken at high mobility regimes. The intensified sensitivity to HOIs can somewhat alleviate extinction, although no striking change has occurred. Our findings may address that modeling predator-prey interactions incorporating HOIs is important for gaining insights into biodiversity, and we hope our study may provide a broad aspect for exploring complex ecosystems.

Effect of the insecticide clothianidin on the photosynthetic electron transport chain in pea.

Clothianidin (CL) is a neonicotinoid insecticide widely used in crop protection against insect pests. However, its effects on photosynthesis remain largely unknown. Here, by investigating the influence of CL at the concentrations of 22 and 110 μg/L on the primary processes of photosynthesis, membrane fluidity and structural changes of pea chloroplasts, we located several primary binding sites of this pesticide. Similar dynamics were observed for both concentrations. However, statistically significant differences were only found at 110 μg/L for all methods used. The light saturated rate of linear electron flow decreased mainly due to the disturbance of electron flow on the acceptor side of photosystem II (PSII) associated with the appearance of QB-nonreducing centers and empty QB binding sites of PSII. The functioning of the donor side of PSII, the activity of photosystem I (PSI) and the maximum quantum yield of PSII photochemistry (Fv/Fm) were not found to be significantly altered. Increased membrane fluidity and structural alterations of the thylakoid membrane led to a decrease in the development of the proton gradient ΔрН and membrane energization processes.

Mechanistic Aspects of Selenate Reduction on CU(UPD) on AU Electrodes

Recent findings in our laboratories have shown that copper1and cadmium2 underpotential deposited on polycrystalline Au electrodes, can mediate the reduction of in 0.1 M HClO4 aqueous solutions, to yield irreversibly adsorbed elemental Se allowing its detection down to the nM range. Current efforts are focused on gaining a better understanding of the the factors that govern this unique electrocatalytic phenomenon by employing a combination of electrochemical, microgravimetric, and optical techniques, using Cu as the UPD species. Correlations have been sought between the rates of this process and the coverage of Cu(UPD), the concentration of and, to a more limited extent, the applied potential in 0.1 M HClO4 solutions. Experimental conditions were selected to unveil the functional dependence of the kinetics on each of the aforementioned factors, while keeping the others constant, in solutions both quiescent and in the presence of convective flow. A number of interesting observations were made based on the data collected. In particular, shown in Panel C, Fig. 1, are plots of the charge associated with the oxidation of adsorbed Cu and Se, QCu and QSe, respectively (see Panel C), obtained from the area under the peaks shaded in light blue and yellow in Panels A and B, Fig, 1, respectively, vs (see below). These data were recorded during linear potential scans following polarization of the electrode at Ehold = 0.325 V for various times, thold (see Panels A-C, Fig. 1), where the linear character of the data in solutions is consistent with Cu(UPD) proceeding under strict diffusion control. As indicated by the QSe data, the electrode displayed electrocatalytic activity for reduction only for QCu > ca. 80 μC cm2-. Additional insight was obtained from measurements of the electrode weight as a function of using a quartz crystal microbalance (see Panel D, Fig.1), which yielded evidence for adsorption only for QCu > ca. 80 μC cm2-, pointing to the formation of a surface-bound adduct, as a necessary step for reduction to ensue. On this basis, we propose that for QCu > ca. 80 μC cm2 the mechanism for reduction involves, as a first step, the reversible formation of the adduct, Eq. (1) followed by its irreversible reduction, generating adsorbed elemental Se, Cu|Se(ads), Eq. (2).Atomically resolved images of Cu(UPD) on Au(111) obtained with a scanning tunneling microscope for the closely related sulfate ion, strongly suggest that the active site involved adsorption on the empty Au sites of the so-called √3´x√3 superstructure (see Insert in Panel A, Fig. 1). A similar conclusion was drawn based on measurements performed with rotating Cu ring-polycrystalline Au disk electrodes, RRDE, at constant Cu(UPD) coverage and applied potential for various solution compositions. Quantitative analyses of all the data, which included numerical simulations, yielded kf/kr, and kET values in the range (2.4 – 3.23) ´ 106 cm3 mol-1 and (2.5 – 9) ´ 10-3 s-1, respectively. Acknowledgments Support for this work was provided by NSF CHEM 1808592

Surface reconstructed layer with bulk high-valence Mo doping to achieve long-life LiMn2O4 cathode material

Mo doping plays a striking role in the stability enhancement of LiMn2O4 cathode materials. However, the underlying microscopic mechanism is still unclear. Here, we elucidate that the relationship between the atomic position of Mo doping in LiMn2O4 and the stability enhancement of Mo-doped LiMn2O4 by utilizing the spherical aberration-corrected scanning transmission electron microscopy (Cs-STEM). It exhibits that the part of Mo6+ ions occupy empty Mn 16c site to form a surface reconstructed layer of rock-salt like phase on the outermost surface and other Mo6+ ions dope into the Mn octahedral 16d sites to form LiMoxMn2-xO4 in bulk, which is beneficial for inhibiting the parasitic side reactions. Concomitantly, this dual modification of bulk structure and surface can significantly enhance electrode reversibility and Li+ diffusion. As a result, excellent long cycling stability of the as-designed optimal LiMo0.01Mn1.99O4 after 1500 cycles with 61.61 % capacity retention at 10 C (1 C = 148 mAh g−1) is presented, with an initial discharge capacity of 88.30 mAh g−1. Our research provides a clever approach for regulating the surface structure/bulk architecture in LiMn2O4 cathode materials.

Kinetic Isotope Effects and the Mechanism of CO2 Insertion into the Metal-Hydride Bond of fac-(bpy)Re(CO)3H.

The 1,2-insertion reaction of CO2 into metal-hydride bonds of d6-octahedral complexes to give κ1-O-metal-formate products is the key step in various CO2 reduction schemes and as a result has attracted extensive mechanistic investigations. For many octahedral catalysts, CO2 insertion follows an associative mechanism in which CO2 interacts directly with the coordinated hydride ligand instead of the more classical dissociative mechanism that opens an empty coordination site to bind the substrate to the metal prior to a hydride migration step. To better understand the associative mechanism, we conducted a systematic quantum chemical investigation on the reaction between CO2 and fac-(bpy)Re(CO)3H (1-Re-H; bpy = 2,2'-bipyridine) starting with the gas phase and then moving to THF and other solvents with increased dielectric constants. Detailed analyses of the potential energy surfaces (PESs) and intrinsic reaction coordinates (IRCs) reveal that the reaction is enabled in all media by an initial stage of making a 3c-2e bond between the carbon of CO2 and the metal-hydride bond that is most consistent with an organometallic bridging hydride Re-H-CO2 species. Once CO2 is bent and anchored to the metal-hydride bond, the reaction proceeds by a rotation motion via a cyclic transition state TS2 that interchanges Re-H-CO2 and Re-O-CHO coordination. The combined stages provide an asynchronous-concerted pathway for CO2 insertion on the Gibbs free energy surface with TS2 as the highest energy point. Consideration of TS2 as a rate-determining TS gives activation barriers, inverse KIEs, substituent effects, and solvent effects that agree with the experimental data available in this system. An important new insight revealed by the analyses of the results is that the initial stage of the reaction is not a hydride transfer step as has been assumed in some studies. In fact, the loose vibration of the TS that can be identified for the first stage of the reaction in solution (TS1) does not involve the Re-H stretching vibrational mode. Accordingly, the imaginary frequency of TS1 is insensitive to deuteration, and therefore, TS1 leads to no significant KIE.

Enhanced High Voltage Stability of Spinel‐Type Structured LiNi0.5Mn1.5O4 Electrodes: Targeted Octahedral Crystal Site Modification

AbstractHigh‐voltage spinel‐type structured LiNi0.5Mn1.5O4 (LNMO) shows promise as a next‐generation high‐energy‐density lithium‐ion battery cathode material, however, capacity decay on extended cycling hinders its widespread adoption, underscoring an urgent need for further development. In this work, we introduce Zn at octahedral 16c crystal sites in LNMO with Fd m space group to improve rate capability and reduce the rapid capacity decay otherwise experienced during extended cycling. The current work resolves the detailed influence of isolated modification at octahedral 16c crystal sites, unveiling the mechanism for these performance improvements. We show that occupation of Zn at previously empty 16c sites prevents the migration of Ni/Mn to adjacent 16c sites, eliminating transformation to a rock‐salt type structured Ni0.25Mn0.75O2 phase above 4.8 V, preventing structure degradation and suppressing voltage polarization. This study provides insights into the fundamental structure‐function relationship of the LNMO battery cathode, pointing to pathways for the crystal structure engineering of materials with superior performance.

User-centric design of a 3D search interface for protein-ligand complexes

In this work, we present the frontend of GeoMine and showcase its application, focusing on the new features of its latest version. GeoMine is a search engine for ligand-bound and predicted empty binding sites in the Protein Data Bank. In addition to its basic text-based search functionalities, GeoMine offers a geometric query type for searching binding sites with a specific relative spatial arrangement of chemical features such as heavy atoms and intermolecular interactions. In contrast to a text search that requires simple and easy-to-formulate user input, a 3D input is more complex, and its specification can be challenging for users. GeoMine’s new version aims to address this issue from the graphical user interface perspective by introducing an additional visualization concept and a new query template type. In its latest version, GeoMine extends its query-building capabilities primarily through input formulation in 2D. The 2D editor is fully synchronized with GeoMine’s 3D editor and provides the same functionality. It enables template-free query generation and template-based query selection directly in 2D pose diagrams. In addition, the query generation with the 3D editor now supports predicted empty binding sites for AlphaFold structures as query templates. GeoMine is freely accessible on the ProteinsPlus web server (https://proteins.plus).

On the structure factor of jammed particle configurations on the one-dimensional lattice

A broad class of blocked or jammed configurations of particles on the one-dimensional lattice can be characterized in terms of local rules involving only the lengths of clusters of particles (occupied sites) and of holes (empty sites). Examples of physical relevance include the metastable states reached by the zero-temperature dynamics of kinetically constrained spin chains, the attractors of totally irreversible processes such as random sequential adsorption, and arrays of Rydberg atoms in the blockade regime. The configurational entropy of ensembles of such blocked configurations has been investigated recently by means of an approach inspired from the theory of stochastic renewal processes. This approach provides a valuable alternative to the more traditional transfer-matrix formalism. We show that the renewal approach is also an efficient tool to investigate a range of observables in uniform ensembles of blocked configurations, besides their configurational entropy. The main emphasis is on their structure factor and correlation function.

β-Phase Yb5Sb3Hx: Magnetic and Thermoelectric Properties Traversing from an Electride to a Semiconductor.

An electride is a compound that contains a localized electron in an empty crystallographic site. This class of materials has a wide range of applications, including superconductivity, batteries, photonics, and catalysis. Both polymorphs of Yb5Sb3 (the orthorhombic Ca5Sb3F structure type (β phase) and hexagonal Mn5Si3 structure type (α phase)) are known to be electrides with electrons localized in 0D tetrahedral cavities and 1D octahedral chains, respectively. In the case of the orthorhombic β phase, an interstitial H can occupy the 0D tetrahedral cavity, accepting the anionic electron that would otherwise occupy the site, providing the formula of Yb5Sb3Hx. DFT computations show that the hexagonal structure is energetically favored without hydrogen and that the orthorhombic structure is more stable with hydrogen. Polycrystalline samples of orthorhombic β phase Yb5Sb3Hx (x = 0.25, 0.50, 0.75, 1.0) were synthesized, and both PXRD lattice parameters and 1H MAS NMR were used to characterize H composition. Magnetic and electronic transport properties were measured to characterize the transition from the electride (semimetal) to the semiconductor. Magnetic susceptibility measurements indicate a magnetic moment that can be interpreted as resulting from either the localized antiferromagnetically coupled electride or the presence of a small amount of Yb3+. At lower H content (x = 0.25, 0.50), a low charge carrier mobility consistent with localized electride states is observed. In contrast, at higher H content (x = 0.75, 1.0), a high charge carrier mobility is consistent with free electrons in a semiconductor. All compositions show low thermal conductivity, suggesting a potentially promising thermoelectric material if charge carrier concentration can be fine-tuned. This work provides an understanding of the structure and electronic properties of the electride and semiconductor, Yb5Sb3Hx, and opens the door to the interstitial design of electrides to tune thermoelectric properties.

Eukaryotic yeast V1-ATPase rotary mechanism insights revealed by high-resolution single-molecule studies.

Vacuolar ATP-dependent proton pumps (V-ATPases) belong to a super-family of rotary ATPases and ATP synthases. The V1 complex consumes ATP to drive rotation of a central rotor that pumps protons across membranes via the Vo complex. Eukaryotic V-ATPases are regulated by reversible disassembly of subunit C, V1 without C, and VO. ATP hydrolysis is thought to generate an unknown rotary state that initiates regulated disassembly. Dissociated V1 is inhibited by subunit H that traps it in a specific rotational position. Here, we report the first single-molecule studies with high resolution of time and rotational position of Saccharomyces cerevisiae V1-ATPase lacking subunits H and C (V1ΔHC), which resolves previously elusive dwells and angular velocity changes. Rotation occurred in 120° power strokes separated by dwells comparable to catalytic dwells observed in other rotary ATPases. However, unique V1ΔHC rotational features included: 1) faltering power stroke rotation during the first 60°; 2) a dwell often occurring ∼45° after the catalytic dwell, which did not increase in duration at limiting MgATP; 3) a second dwell, ∼2-fold longer occurring 112° that increased in duration and occurrence at limiting MgATP; 4) limiting MgATP-dependent decreases in power stroke angular velocity where dwells were not observed. The results presented here are consistent with MgATP binding to the empty catalytic site at 112° and MgADP released at ∼45°, and provide important new insight concerning the molecular basis for the differences in rotary positions of substrate binding and product release between V-type and F-type ATPases.

UFM1 E3 ligase promotes recycling of 60S ribosomal subunits from the ER.

Reversible modification of target proteins by ubiquitin and ubiquitin-like proteins (UBLs) is widely used by eukaryotic cells to control protein fate and cell behaviour1. UFM1 is a UBL that predominantly modifies a single lysine residue on a single ribosomal protein, uL24 (also called RPL26), on ribosomes at the cytoplasmic surface of the endoplasmic reticulum (ER)2,3. UFM1 conjugation (UFMylation) facilitates the rescue of 60S ribosomal subunits (60S) that are released after ribosome-associated quality-control-mediated splitting of ribosomes that stall during co-translational translocation of secretory proteins into the ER3,4. Neither the molecular mechanism by which the UFMylation machinery achieves such precise target selection nor how this ribosomal modification promotes 60S rescue is known. Here we show that ribosome UFMylation in vivo occurs on free 60S and we present sequential cryo-electron microscopy snapshots of the heterotrimeric UFM1 E3 ligase (E3(UFM1)) engaging its substrate uL24. E3(UFM1) binds the L1 stalk, empty transfer RNA-binding sites and the peptidyl transferase centre through carboxy-terminal domains of UFL1, which results in uL24 modification more than 150 Å away. After catalysing UFM1 transfer, E3(UFM1) remains stably bound to its product, UFMylated 60S, forming a C-shaped clamp that extends all the way around the 60S from the transfer RNA-binding sites to the polypeptide tunnel exit. Our structural and biochemical analyses suggest a role for E3(UFM1) in post-termination release and recycling of the large ribosomal subunit from the ER membrane.

CAMP binding to closed pacemaker ion channels is cooperative

The cooperative action of the subunits in oligomeric receptors enables fine-tuning of receptor activation, as demonstrated for the regulation of voltage-activated HCN pacemaker ion channels by relating cAMP binding to channel activation in ensemble signals. HCN channels generate electric rhythmicity in specialized brain neurons and cardiomyocytes. There is conflicting evidence on whether binding cooperativity does exist independent of channel activation or not, as recently reported for detergent-solubilized receptors positioned in zero-mode waveguides. Here, we show positive cooperativity in ligand binding to closed HCN2 channels in native cell membranes by following the binding of individual fluorescence-labeled cAMP molecules. Kinetic modeling reveals that the affinity of the still empty binding sites rises with increased degree of occupation and that the transition of the channel to a flip state is promoted accordingly. We conclude that ligand binding to the subunits in closed HCN2 channels not pre-activated by voltage is already cooperative. Hence, cooperativity is not causally linked to channel activation by voltage. Our analysis also shows that single-molecule binding measurements at equilibrium can quantify cooperativity in ligand binding to receptors in native membranes.

Intercalation in Li-ion batteries: thermodynamics and its relation to non-ideal solid-state diffusion

Intercalation is the key phenomenon taking place in lithium-ion batteries: while its thermodynamics sets the equilibrium voltage of active materials, solid-state diffusion of intercalated lithium determines the rate at which the battery can operate. This study revisits the thermodynamics of intercalation by treating the active material as a binary mixture of filled and empty sites, thus relating the equilibrium potential to the chemical potential difference of intercalated lithium. By setting a reference to unitary activity at half state-of-lithiation, the non-ideal behaviour of the active material is quantified via a revisited form of the thermodynamic enhancement factor, revealing that common solid-solution cathode materials as LiNi x Mn y Co1-x-y O2, LiNi0.8Co0.15Al0.05O2, and LiCoO2 show strong super-ideal behaviour. The latter is related to the thermodynamic enhancement of the diffusion coefficient of intercalated lithium. A comprehensive overview of the functional forms of Li diffusion flux according to linear irreversible thermodynamics is provided and related to the chemical diffusion coefficient obtained by conventional characterisation techniques. A literature analysis made on solid-solution cathode active materials reveals that while the chemical diffusion coefficient varies significantly with state-of-lithiation, there exists a convenient functional form of diffusion flux according to linear irreversible thermodynamics that enables a fairly stable diffusion coefficient with state-of-lithiation. This has clear benefits from both modelling and experimental viewpoints and potentially sheds light on the mechanistic fundamentals of solid-state diffusion.

Female Aedes aegypti mosquitoes use communal cues to manage population density at breeding sites

Where a female mosquito lays her eggs creates the conditions for reproductive success. Here we identify a communal behavior among ovipositing female mosquitoes. When choosing equal breeding sites, gravid Aedes aegypti aggregate more often than expected. This aggregation occurs when water contact is restricted and does not require the presence of eggs. Instead, the aggregation is regulated by the number of females present at the breeding site. Using assays with both occupied and empty oviposition sites, we show that the Orco olfactory co-receptor and a carbon dioxide receptor, Gr3, detect the presence of mosquitoes. orco mutants aggregate more often in empty sites, suggesting attractive olfactory cues influence females to associate with one another. Gr3 mutant females do not prefer either site, suggesting that the CO2 receptor is necessary to evaluate mosquito population density at breeding sites. Further, raising CO2 levels is sufficient to cause wild-type mosquitoes to avoid empty oviposition sites. Our results demonstrate that female mosquitoes can regulate their own population density at breeding sites using attractive and repellent communal cues.

Air-Stable Coordinatively Unsaturated Ruthenium(II) Complex for Ligand Binding and Catalytic Transfer Hydrogenation of Ketones from Ethanol.

Coordinatively unsaturated complexes are interesting from a fundamental level for their formally empty coordination site and, in particular, from a catalytic perspective as they provide opportunities for substrate binding and transformation. Here, we describe the synthesis of a novel underligated ruthenium complex [Ru(cym)(N,N')]+, 3, featuring an amide-functionalized pyridylidene amide (PYA) as the N,N'-bidentate coordinating ligand. In contrast to previously investigated underligated complexes, complex 3 offers potential for dynamic modifications, thanks to the flexible donor properties of the PYA ligand. Specifically, they allow both for stabilizing the formally underligated metal center in complex 3 through nitrogen π-donation and for facilitating through π-acidic bonding properties the coordination of a further ligand L to the ruthenium center to yield the formal 18 e- complexes [Ru(cym)(N,N')(L)]+ (4: L = P(OMe)3; 5: L = PPh3; 6: L = N-methylimidazole; 7: L = pyridine) and neutral complex [RuCl(cym)(N,N')] 8. Analysis by 1H NMR and UV-vis spectroscopies reveals an increasing Ru-L bond strength along the sequence pyridine <1-methylimidazole < PPh3 < P(OMe)3 with binding constants varying over 3 orders of magnitude with log(Keq) values between 2.8 and 5.7. The flexibility of the Ru(PYA) unit and the ensuing accessibility of saturated and unsaturated species with one and the same ligand are attractive from a fundamental point of view and also for catalytic applications, as catalytic transformations rely on the availability of transiently vacant coordination sites. Thus, while complex 3 does not form stable adducts with O-donors such as ketones or alcohols, it transiently binds these species, as evidenced by the considerable catalytic activity in the transfer hydrogenation of ketones. Notably, and as one of only a few catalysts, complex 3 is compatible with EtOH as a hydrogen source. Complex 3 shows excellent performance in the transfer hydrogenation of pyridyl-containing substrates, in agreement with the poor coordination strength of this functional group to the ruthenium center in 3.

Flattened chains dominate the adsorption dynamics of loosely adsorbed chains on modified planar substrates.

Herein, the adsorption of polystyrene (PS) on phenyl-modified SiO2-Si substrates was investigated. Different from those for PS adsorption on a neat SiO2-Si substrate, the growth rate (vads) in the linear regime and hads/Rg (hads, thickness of flattened and loosely adsorbed layers on the substrate; Rg, radius of gyration) declined with increasing molecular weight (Mw) of PS and the phenyl content on the modified substrates, while the thickness of the flattened layer (hflat) and its coverage increased with increasing phenyl content. The results indicated that the adsorption of loose chains was controlled by the adsorption of flattened chains, as it only occurred in the empty contact sites remaining after the adsorption of flattened chains. Before approaching quasi-equilibrium (t < tcross), the number of flattened chain contact sites increased due to an enthalpically favorable process and, correspondingly, their spatial positions dynamically changed, which perturbed the adsorption of loose chains. When the adsorption of flattened chains reached quasi-equilibrium (t > tcross), the adsorption of loose chains was determined by the empty contact sites. The coverage of flattened chains and time to reach quasi-equilibrium were increased with more phenyl groups on the substrate, enhancing π-π interfacial interactions and resulting in a decreased adsorption rate and fewer loosely adsorbed chains. Mw-dependent vads and hads/Rg differed on phenyl-modified substrates compared to the neat SiO2-Si substrate owing to fewer empty contact sites for loose chains. The study findings improve our understanding of the mechanism responsible for the formation and structure of the adsorbed layer on solid surfaces.

Questioning the tabula rasa in Indian modernity: Toward a genealogy for the Anthropocene

AbstractThis article examines the history of Kharaghoda, an important site of colonial salt extraction located on the edge of the Little Rann of Kutch, Gujarat. It highlights relationships between development and ecology through analysis of colonial documents published between 1872 and 1940. The intention at Kharaghoda was to enforce colonial political agendas through the construction of infrastructure on what was seen as an empty site. However, contrary to a tabula rasa condition, records suggest a complex relationship with site ecologies. In particular, nature was not uniformly sublimated by the project, but exerted influence on a rapidly fluctuating built environment. The article presents developments thematically, with each investigating the archives and corresponding developments chronologically. By foregrounding the ecological voice within the archives it advocates for a definition of modern heritage that recognizes interactions between nature and built environments to suggest future possibilities for conservation acknowledging human and nonhuman agencies.

Simultaneous detection of breast cancer biomarkers HER2 and miRNA-21 based on duplex-specific nuclease signal amplification.

The detection of a single biomarker is prone to false negative or false positive results. Simultaneous analysis of two biomarkers can greatly improve the accuracy of diagnosis. In this work, we designed a new method for coinstantaneous detection of two breast cancer biomarkers miRNA-21 and HER2 using the properties of duplex-specific nuclease (DSN). Cy5-labeled DNA1 and FAM-labeled DNA2 are used as signal probes to distinguish the two signals. When the sample contains the targets HER2 and miRNA-21, HER2 binds to the HER2 aptamer on the double-stranded DNA2, while miRNA-21 binds to the complementary DNA1. Then, DSN enzyme is added to cut the DNA probes adsorbed on the HER2 aptamer and miRNA-21, releasing the fluorescent groups, which can be readsorbed to the empty sites, thus repeating the cutting of the probes and producing an exponential signal amplification with two distinct fluorescent signals. The detection limits of miRNA-21 and HER2 are 1.12 pM and 0.36 ng mL-1, respectively, with linear ranges of 5 pM to 50 pM and 1 ng mL-1 to 15 ng mL-1. The method was validated in real biological samples, providing a new approach for synchronous analysis of important markers in breast cancer.

THE INFLUENCE OF CULTURAL AND ARTISTIC TRADITIONS OF CHINA ON THE IMAGE OF A RELIGIOUS BUILDING

The Buddhist temple complex of Dunhuang can be named as the oldest example of the transformation of architectural and artistic canons of foreign religions when they were transferred to the territory of China. The artistic canons of the sanctuaries, which originated in India, underwent more and more transformations as local architectural and artistic skills developed. The same can be said about the transformation of the image of an Islamic religious building in the case of mosques, for example, in Shaanxi province, which acquired the architectural and artistic image of a Chinese temple of the traditional beliefs of Taoism and Confucianism. The influence of local traditions even on the image of a Christian church, namely the German Protestant church in Qingdao, was studied. In particular, it is quite bright for the German northern national romanticism, the polychromy of the facades, which contrasts with the ascetic interior. &#x0D; Unlike traditional Protestant churches, the Protestant church in Qingdao has an irregular plan and the entrance to it is located not from the west, as usually, but from the south (Fig. 1). The asymmetry of the church composition is emphasized by the dominant tower with a height of 39 m. &#x0D; This object is traditionally mentioned in the same row as other objects of northern national romanticism – the Residence of the Governor of Qingdao and the Japanese Girl’s High School. First of all, let’s analyze what signs of northern national romanticism are present here: &#x0D; – large scale;&#x0D; – an active silhouette with the presence of pseudo-Romanesque towers of different heights;&#x0D; – the presence of “torn” stone cladding;&#x0D; – lack of small details and decoration on the facades.&#x0D; Now let's define the features that are not inherent in the typical German northern national romanticism:&#x0D; – dominance of yellow tinted wall planes over planes faced with “torn” stone;&#x0D; – the introduction of bright polychromy (red tiled roofs – yellow plastered walls – planes faced with “torn” granite – green tower’s roof not in the outlines of northern national romanticism).&#x0D; An analysis of the appearance of the Protestant church in Qingdao led to the following conclusions.&#x0D; An analysis of the appearance of the Protestant church in Qingdao led to the following conclusions.&#x0D; The important role of this object in the planning structure of the settlement actually built on an empty site is evidenced by the following facts:&#x0D; – the location is close to the government district;&#x0D; – holding a competition in Berlin;&#x0D; – funding by the Qingdao Governor's Office;&#x0D; – the choice of the style of northern national romanticism. &#x0D; However, despite the presence of some signs of northern national romanticism in its German version, the phenomenon of style transformation when transferred to Chinese soil should be noted. In particular, under the influence of the picturesque natural environment, other natural and climatic conditions and Chinese architectural and artistic traditions of bright colours, the Protestant church acquired features that are not characteristic of northern national romanticism.