Scaption Research Articles

Isolated humeral distalization in reverse total shoulder arthroplasty: a biorobotic shoulder simulator study

BackgroundHumeral distalization is inherent to reverse total shoulder arthroplasty (rTSA) and is often produced with concomitant humeral lateralization via the level of the humeral head cut, implant positioning, implant neck shaft angle, and polymer insert thickness. Biomechanical data on the isolated effects of humeral distalization remain limited but could be important to consider when optimizing postoperative rTSA shoulder function. This study investigated the effects of isolated humeral distalization on shoulder biomechanics using a biorobotic shoulder simulator. MethodsEight fresh-frozen cadaveric shoulders were tested using custom polymer inserts that translated the bearing surface 0, +5, +10, and +15 mm along the humeral stem axis, producing isolated distalization without lateralization. Specimens underwent passive elevation in the scapular plane with a static scapula to assess glenohumeral range of motion. Scapular plane abduction motion trajectories were then performed, driven by previously collected scapulothoracic and glenohumeral kinematics from rTSA patients. The effect of isolated distalization on passive elevation was tested using mixed-effects linear regression and the effect on muscle force, joint reaction force, and muscle excursion during active scapular-plane abduction was tested using statistical parametric mapping random effects analysis. ResultsMaximum passive scapular plane elevation increased with humeral distalization (4° per 5 mm distalization). During active elevation, deltoid and rotator cuff muscle forces, and joint reaction forces, increased up to 37% per 5 mm of distalization. Simulated deltoid muscle excursion was altered with increasing distalization but amounted to no more than 0.8 mm change from baseline per 5 mm of distalization. Rotator cuff muscles were consistently lengthened throughout abduction, up to 1.6 mm per 5 mm of distalization. These trends were observed across various patient motions. ConclusionsIsolated humeral distalization caused dramatic increases in the muscle forces required to perform scapular-plane abduction. Joint reaction forces increased correspondingly. These results suggest that implant and surgical strategies to generate deltoid muscle tension without humeral distalization may promote better active range of motion and more durable long-term outcomes over approaches that rely on distalization.

Analysis of the three-dimensional scapular kinematics and associated scapular muscle activity during scapular muscle exercises

ObjectiveTo compare scapular kinematics and muscle activity among various scapular muscle exercises. DesignA cross-sectional study. SettingA university research laboratory. ParticipantsEighteen healthy men participated in this study. Main outcome measuresThree-dimensional scapular kinematics was measured with an electromagnetic motion capture system. Activities of the upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA) were measured by using surface electromyography (EMG). In addition, the ratio of LT to the UT (LT/UT) and SA to the UT (SA/UT) was calculated. A repeated one-way analysis of variance and Shaffer's post-hoc analysis were used to detect the differences in each outcome during five exercises. ResultsThe scapula was rotated upwardly during all exercises except push-up plus. The LT/UT ratio during side-lying external rotation and side-lying flexion were significantly higher than that for scapular plane elevation (P < .05), although the highest activity of the lower trapezius was produced during scapular plane elevation. The activities of the serratus anterior and SA/UT ratio during horizontal adducted elevation and push-up plus were significantly higher than that during scapular plane elevation (P < .05). ConclusionHorizontal adducted elevation might be more appropriate for increasing scapular upward rotation with high serratus anterior activity and SA/UT ratio than push-up plus.

Inlay vs. onlay humeral components in reverse total shoulder arthroplasty: a biorobotic shoulder simulator study

BackgroundBoth inlay and onlay humeral implants are available for reverse total shoulder arthroplasty (rTSA), but biomechanical data comparing these components remains limited. This study investigated the effects of inlay and onlay rTSA humeral components on shoulder biomechanics using a biorobotic shoulder simulator. MethodsTwenty fresh-frozen cadaver shoulders were tested before and after rTSA with either an inlay or onlay humeral implant. Comparisons were performed between the most commonly implanted configurations for each implant (baseline), and a modification to provide equivalent neck shaft angle (NSA) for the inlay and onlay configurations. Specimens underwent passive range of motion (ROM) assessment with the scapula held static, and performed scapular plane abduction driven by previously collected human-subject scapulothoracic and glenohumeral kinematics. Passive ROM glenohumeral joint angles were compared using t-tests while muscle force and excursion data during scapular plane elevation were evaluated with statistical parametric mapping and t-tests. ResultsMaximum passive elevation was reduced for the inlay versus onlay humeral component, while both implants caused reduced passive elevation versus the native joint. Inlay rTSA also demonstrated reduced passive internal rotation at rest and increased external rotation at 90° humerothoracic elevation versus the native joint. All preoperative plan ROM estimates differed from experiments. Rotator cuff forces were elevated with an onlay versus inlay humeral implant, but simulated muscle excursions did not differ between systems. Compared to the native joint, rotator cuff forces were increased for both inlay and onlay implants and deltoid forces were reduced for inlay. The rTSA dramatically altered muscle excursions versus the native joint. Comparisons of inlay and onlay humeral implants with equivalent NSA were consistent with the baseline comparisons. ConclusionsRotator cuff forces required to perform scapular plane abduction increase following rTSA using both inlay and onlay implants. Rotator cuff forces are lower with inlay implants compared to onlay, although inlay implants also result in reduced passive elevation ROM. Deltoid forces are lower with inlay implants in comparison to native, but not with onlay implants. The differences between inlay and onlay components are largely unaffected by NSA, indicating that these differences are inherent to the inlay and onlay designs. In those patients with an intact rotator cuff, decreased rotator cuff forces to perform abduction with an inlay humeral implant compared to an onlay implant may promote improved long-term outcomes due to reduced deltoid muscle fatigue when using an inlay implant.

Moment arms of the coracobrachialis and short head of biceps following a Latarjet procedure: a modeling study

BackgroundThe Latarjet procedure transfers the coracoid process to the anterior glenoid. This prevents recurrent anterior humeral dislocation but alters the origin of the coracobrachialis (CBR) and short head of bicep (SHB). The impact of this alteration on the moment arms of these muscles has not been examined. MethodsThe Newcastle Shoulder Model was updated with 15 heathy cadaveric bone models to create customized shoulder models. The CBR and SHB muscles were attached to the anterior glenoid via an elliptical wrapping object. Muscle moment arms were calculated for abduction, forward flexion, scapula plane elevation and internal rotation with 20⁰ and 90⁰ abduction. Statistical comparison between native and Latarjet moment arms was performed using spm1D. ResultsBy transferring the origin of CBR and SHB to the anterior glenoid, both muscles had extension moment arms during glenohumeral elevation in coronal, sagittal, and scapular plane. Their average moment arms during abduction (CBR: -30.4±3.2mm; SHB: -29.8±3.0mm) and forward flexion (CBR: -26.0±3.1mm; SHB: -26.2±3.2mm) suggested that their role after Latarjet changed, compared with that of their role in a native shoulder (p<0.001). At higher abduction levels both the muscles had higher internal rotation moment arms compared to the native shoulder. ConclusionThe Latarjet procedure affected the moment arms of the CBR and SHB. Both muscles had increased extension and internal rotation moment arms at higher degrees of elevation, compared to the native shoulders, this suggests that these muscles act as dynamic stabilizers after Latarjet.

Characterizing moment arms of the coracobrachialis and short head of biceps in native shoulders and after reverse total shoulder arthroplasty during elevation and rotation: a modeling study.

Reverse total shoulder arthroplasty (RTSA) alters the line of action of muscles around the glenohumeral joint. The effects of these changes have been well characterized for the deltoid, but there is limited information regarding the biomechanical changes to the coracobrachialis (CBR) and short head of biceps (SHB). In this biomechanical study, we investigated the changes to the moment arms of the CBR and SHB due to RTSA using a computational model of the shoulder. The Newcastle Shoulder Model, a pre-validated upper-extremity musculoskeletal model, was used for this study. The Newcastle Shoulder Model was modified with bone geometries obtained from 3-dimensional reconstructions of 15 nondiseased shoulders, constituting the native shoulder group. The Delta XTEND prosthesis, with a glenosphere diameter of 38 mm and polyethylene thickness of 6 mm, was virtually implanted in all the models, creating the RTSA group. Moment arms were measured using the tendon excursion method, and muscle length was calculated as the distance between the muscle's origin and insertion points. These values were measured during 0°-150° of abduction, forward flexion, scapular-plane elevation, and -90° to 60° of external rotation-internal rotation with the arm at 20° and 90° of abduction. Statistical comparisons between the native and RTSA groups were analyzed using 1-dimensional statistical parametric mapping (spm1D). Forward flexion moment arms showed the greatest increase between the RTSA group (CBR, 25.3±4.7 mm; SHB, 24.7±4.5 mm) and native group (CBR, 9.6±5.2 mm; SHB, 10.2±5.2 mm). The CBR and SHB were longer in the RTSA group by maximum values of 15% and 7%, respectively. Both muscles had larger abduction moment arms in the RTSA group (CBR, 20.9±4.3 mm; SHB, 21.9±4.3 mm) compared with the native group (CBR, 19.6±6.6 mm; SHB, 20.0±5.7 mm). Abduction moment arms occurred at lower abduction angles in the RTSA group (CBR, 50°; SHB, 45°) than in the native group (CBR, 90°; SHB, 85°). In the RTSA group, both muscles had elevation moment arms until 25° of scapular-plane elevation motion, whereas in the native group, the muscles only had depression moment arms. Both muscles had small rotational moment arms that were significantly different between RTSA and native shoulders during different ranges of motion. Significant increases in elevation moment arms for the CBR and SHB were observed in RTSA shoulders; these increases were most pronounced during abduction and forward elevation motions. RTSA also increased the lengths of these muscles.

Effect of shoulder immobilization position and activities of daily living on the stiffness of the repaired supraspinatus tendon

BackgroundAlthough tension on the supraspinatus tendon may be increased by wearing an abduction brace in an improper position or activities of daily living with the operated arm in the brace, the amount of tension has not been objectively evaluated. MethodsEighteen patients who underwent arthroscopic rotator cuff repair were enrolled. The stiffness of the repaired supraspinatus tendon was measured with ultrasound elastography to estimate the tension on the repaired tendon. Measurements were performed in 5 immobilization positions (0°, 30°, and 45° of arm elevation in the scapular plane; 30° of arm elevation in the scapular plane+60° (horizontal adduction) and −60° (horizontal abduction)) and 3 static positions simulating drinking, brushing teeth, and dressing. FindingsStiffness at 30° of scapular plane elevation was lower than 0° of scapular plane elevation (P = 0.034), 30° of elevation in the scapular plane+60° (P < 0.001), and −60° (P < 0.001). There was no significant difference in the stiffness between 30° and 45° of scapular plane elevation (P = 1.000). The stiffness was the greatest at 30° of elevation in the scapular plane−60° among the 5 immobilization positions. The stiffnesses at drinking and brushing teeth were greater than 30° of scapular plane elevation (P < 0.001). InterpretationImmobilization with the arm ≥30° of elevation in the scapular plane may be an optimal position for minimizing stiffness or tension on the repaired tendon. Drinking and brushing teeth may need to be performed using the non-operated arm to protect the repaired tendon.

Dynamic three-dimensional shoulder kinematics in patients with massive rotator cuff tears: a comparison of patients with and without subscapularis tears.

Massive rotator cuff tears (MRCTs) with subscapularis (SSC) tears cause severe shoulder dysfunction. In the present study, the influence of SSC tears on three-dimensional (3D) shoulder kinematics during scapular plane abduction in patients with MRCTs was examined. This study included 15 patients who were divided into two groups: supraspinatus (SSP) and infraspinatus (ISP) tears with SSC tear (torn SSC group: 10 shoulders) or without SSC tear (intact SSC group: 5 shoulders). Single-plane fluoroscopic images during scapular plane elevation and computed tomography (CT)-derived 3D bone models were matched to the fluoroscopic images using two-dimensional (2D)/3D registration techniques. Changes in 3D kinematic results were compared. The humeral head center at the beginning of arm elevation was significantly higher in the torn SSC group than in the intact SSC group (1.8±3.4 mm vs. -1.1±1.6 mm, p<0.05). In the torn SSC group, the center of the humeral head migrated superiorly, then significantly downward at 60° arm elevation (p<0.05). In the intact SSC group, significant difference was not observed in the superior-inferior translation of the humeral head between the elevation angles. In cases of MRCTs with a torn SSC, the center of the humeral head showed a superior translation at the initial phase of scapular plane abduction followed by inferior translation. These findings indicate the SSC muscle plays an important role in determining the dynamic stability of the glenohumeral joint in a superior-inferior direction in patients with MRCTs.

Reverse Total Shoulder Arthroplasty Alters Humerothoracic, Scapulothoracic, and Glenohumeral Motion During Weighted Scaption.

Reverse total shoulder arthroplasty (rTSA) typically restores active arm elevation. Prior studies in patients with rTSA during tasks that load the arm had limitations that obscured underlying three-dimensional (3D) kinematic changes and the origins of motion restrictions. Understanding the scapulothoracic and glenohumeral contributions to loaded arm elevation will uncover where functional deficits arise and inform strategies to improve rTSA outcomes. In a cohort of patients who had undergone rTSA and a control cohort, we asked: (1) Is there a difference in maximum humerothoracic elevation when scapular plane elevation (scaption) is performed with and without a handheld weight? (2) Is maximum humerothoracic elevation related to factors like demographics, patient-reported outcome scores, isometric strength, and scapular notching (in the rTSA group only)? (3) Are there differences in underlying 3D scapulothoracic and glenohumeral motion during scaption with and without a handheld weight? Ten participants who underwent rTSA (six males, four females; age 73 ± 8 years) were recruited at follow-up visits if they were more than 1 year postoperative (24 ± 11 months), had a BMI less than 35 kg/m 2 (29 ± 4 kg/m 2 ), had a preoperative CT scan, and could perform pain-free scaption. Data from 10 participants with a nonpathologic shoulder, collected previously (five males, five females; age 58 ± 7 years; BMI 26 ± 3 kg/m 2 ), were a control group with the same high-resolution quantitative metrics available for comparison. Participants in both groups performed scaption with and without a 2.2-kg handheld weight while being imaged with biplane fluoroscopy. Maximum humerothoracic elevation and 3D scapulothoracic and glenohumeral kinematics across their achievable ROM were collected via dynamic imaging. In the same session the American Shoulder and Elbow Surgeons (ASES) score, the Simple Shoulder Test (SST), and isometric strength were collected. Data were compared between weighted and unweighted scaption using paired t-tests and linear mixed-effects models. When compared with unweighted scaption, maximum humerothoracic elevation decreased during weighted scaption for patients who underwent rTSA (-25° ± 30°; p = 0.03) but not for the control group (-2° ± 5°; p = 0.35). In the rTSA group, maximum elevation correlated with the ASES score (r = 0.72; p = 0.02), and weighted scaption correlated with BMI (r = 0.72; p = 0.02) and the SST (r = 0.76; p = 0.01). Scapular notching was observed in three patients after rTSA (Grades 1 and 2). Four of 10 patients who underwent rTSA performed weighted scaption to less than 90° humerothoracic elevation using almost exclusively scapulothoracic motion, with little glenohumeral contribution. This manifested as changes in the estimated coefficient representing mean differences in slopes in the humerothoracic plane of elevation (-12° ± 2°; p < 0.001) and true axial rotation (-16° ± 2°; p < 0.001), scapulothoracic upward rotation (7° ± 1°; p < 0.001), and glenohumeral elevation (-12° ± 1°; p < 0.001), plane of elevation (-8° ± 3°; p = 0.002), and true axial rotation (-11° ± 2°; p < 0.001). The control group demonstrated small differences between scaption activities (< |2°|), but a 10° increase in humerothoracic and glenohumeral axial rotation (both p < 0.001). After rTSA surgery, maximum humerothoracic elevation decreased during weighted scaption by up to 88° compared with unweighted scaption, whereas 4 of 10 patients could not achieve more than 90° of elevation. These patients exhibited appreciable changes in nearly all scapulothoracic and glenohumeral degrees of freedom, most notably a near absence of glenohumeral elevation during weighted scaption. Patients with rTSA have unique strategies to elevate their arms, often with decreased glenohumeral motion and resultant compensation in scapulothoracic motion. In contrast, the control group showed few differences when lifting a handheld weight. Functional deficiency in activities that load the shoulder after rTSA surgery can affect patient independence, and they may be prevalent but not captured in clinical studies. Pre- or postoperative rehabilitation to strengthen scapular stabilizers and the deltoid should be evaluated against postoperative shoulder function. Further study is required to determine the etiology of deficient glenohumeral motion after rTSA, and the most effective surgical and/or rehabilitative strategies to restore deficient glenohumeral motion after rTSA.

Infraspinatus Muscle Fiber Moment Arms During Abduction: A Biomechanical Comparison of Values for Intact Rotator Cuff, Supraspinatus Tear, Superior Capsular Reconstruction, and Reverse Total Shoulder Arthroplasty.

Background:Lines of action of the superior, middle, and inferior infraspinatus muscle fibers work together to produce moment arms that change throughout abduction in an intact shoulder, after a supraspinatus tear, and after superior capsular reconstruction (SCR) and reverse total shoulder arthroplasty (rTSA).Purpose:To use moment arm values to indicate the efficacy of SCR and rTSA to restore infraspinatus function during shoulder abduction.Study Design:Descriptive laboratory study.Methods:A total of 5 human cadaveric shoulders placed in a testing apparatus were each actively abducted (0°-90°) under the following 4 conditions: intact, complete supraspinatus tear, SCR, and rTSA. The 3-dimensional coordinates of points were tracked along the origin and insertion of the superior, middle, and inferior infraspinatus fibers during abduction. Moment arm values were calculated using the origin-insertion method to determine abduction contribution of infraspinatus fiber sections. Analysis of variance and post hoc Tukey testing were used to compare differences in moment arms between the 4 conditions and between fiber sections.Results:In the intact condition, the superior infraspinatus fibers had an abduction moment that decreased with elevation until shifting to adduction. Conversely, the middle and inferior fibers had an adduction moment that turned to abduction (mean moment arm values from 0° to 90°: inferior, from –5.9 to 19.4 mm; middle, from –4.7 to 15.9 mm; superior, from 5.6 to –5.1 mm; P < .05). After a supraspinatus tear, superior fibers lacked any torque, and inferior and middle fibers lost adduction potential (inferior, from 4.8 to 14.0 mm; middle, from –0.2 to 9.6 mm; superior, from 1.0 to 0.7 mm; P < .05). SCR restored the initial superior fiber abduction moment (5.6 mm at 0°; P < .05); middle and inferior fibers had some restoration but were weaker than intact fibers. Loss of abduction moment in all fibers was seen with rTSA (inferior, from –9.6 to –1.6 mm; middle, from –10.5 to –3.6 mm; superior, from –1.7 to –4.6 mm; P < .05).Conclusion:Infraspinatus fiber groups had different and inverse moment arms during scapular plane elevation. SCR most closely resembled the intact shoulder, whereas rTSA transformed the infraspinatus into an adductor.Clinical Relevance:These results support the efficacy of SCR at restoring biomechanical muscle function and suggest that the changes in moment arms for each fiber group be considered when choosing treatment modalities and rehabilitation protocols after rotator cuff tear.

The biomechanical effect of injury and repair of the inferior glenohumeral ligament on glenohumeral stability: Contribution of the posterior band

BackgroundMany surgical procedures are proposed to manage shoulder instability with recurrent dislocation but there is still a high rate of failure or complications. Repairs are often limited to anterior part of inferior glenohumeral ligament but some authors are reporting better clinical results if its posterior band is also repaired. This biomechanical study aimed to investigate the impact of a supplementary posterior injury compared with an isolated anterior injury and to analyze the contribution of a posterior repair of the inferior glenohumeral ligament compared with an isolated anterior repair. MethodsSix fresh-frozen cadaveric shoulders were tested intact and after both anterior and posterior injuries and repairs of the inferior glenohumeral ligament. Shoulders were placed at 90° of humerothoracic elevation in scapular plane and 60° of external rotation. Joint stability was analyzed by successively applying anterior, posterior, inferior and superior glenohumeral displacements and measuring the resulting forces or by applying an anteroinferior loading and measuring three-dimensional head displacements. Maximal range of external rotation was also measured. FindingsCombined anterior and posterior injuries of the inferior glenohumeral ligament were necessary to obtain significant instabilities in anterior and inferior directions. A complementary repair of the posterior band improved the biomechanical stability of the glenohumeral joint compared to an isolated anterior repair when anterior and posterior bands are injured. No reduction of external rotation was observed after repairs compared to intact condition. InterpretationThese results show the biomechanical interest of this surgical procedure and contribute to document its relevance in clinical practice.

Elasticity of baseball players’ posterior shoulder capsule during internal rotation stretching at 30 degrees of scaption

Previous cadaveric studies have identified effective stretching positions for the posterior shoulder capsules; however, it is unknown whether these stretching positions are also effective in overhead athletes. This study aimed to investigate whether passive tension was generated in the posterior shoulder capsules in baseball players during stretching positions identified in previous cadaveric studies. Fifteen male baseball players without prior shoulder injuries or surgeries participated in this study. We measured the shear moduli of the middle and inferior posterior capsules of the dominant shoulder in the resting (neutral shoulder internal/external rotation at 30 degrees of flexion) and stretching (maximal shoulder internal rotation at 30 degrees of scapular plane elevation (scaption)) positions using ultrasound shear wave elastography. The shear moduli of the middle posterior capsule were significantly higher in the stretching position than in the resting position (resting vs stretching: 20.9 vs 34.6 kPa, P < .001); however, there was no significant difference in the shear moduli between both positions in the inferior posterior capsule (22.3 vs 29.5 kPa, P = .120). Our results revealed that a large amount of passive tension is generated in the middle posterior capsule during shoulder internal rotation stretching at 30 degrees of scaption in overhead athletes.

Comparing invivo three-dimensional shoulder elevation kinematics between standing and supine postures.

BackgroundIt is often assumed that body posture, standing vs. supine, changes shoulder muscle activation and range of motion, but these altered shoulder mechanics have not been objectively assessed. We expected the supine posture might facilitate scapular rotation and change subacromial pressure. The purpose of this study is to evaluate the influence of body posture on shoulder kinematics during arm elevation.MethodsTen males and eight females with a mean age of 33 years participated in this study. Shoulder kinematics were assessed during scapular plane elevation in the standing and supine postures by using single-plane fluoroscopic images. Kinematics were measured using 3-dimensional to 2-dimensional model-image registration techniques: matching the 3-dimensional bone model derived from computed tomography onto each fluoroscopic image. Glenohumeral superior/inferior translation, acromiohumeral distance, and scapular rotations were compared between the postures. The effect of sex also was evaluated.ResultsWith the arm at the side position, the humeral head in the supine posture was located 0.5 mm superior compared to the standing posture (P < .001). During humeral elevation, the humeral head significantly shifted more inferiorly in the supine posture than in standing; the biggest mean difference was 0.6 mm, P = .003. But acromiohumeral distance during elevation was not significantly affected by the body posture (P = .05). Scapular upward rotation and posterior tilt were significantly different between the postures (P < .001). Sex had statistically significant, but quantitatively small, effects on shoulder kinematics.ConclusionsBody postures affect shoulder kinematics during humeral elevation. This knowledge will be useful to optimize rehabilitation exercises and for diagnostic insight.

Joint-line medialization after anatomical total shoulder replacement requires more rotator cuff activity to preserve joint stability.

BackgroundThe biomechanical effects of joint-line medialization during shoulder surgery are poorly understood. It was therefore the purpose of this study to investigate whether medialization of the joint line especially associated with total shoulder arthroplasty leads to changes in the rotator cuff muscle forces required to stabilize the arm in space.MethodsA validated computational 3-D rigid body simulation model was used to calculate generated muscle forces, instability ratios, muscle-tendon lengths and moment arms during scapular plane elevation. Measurements took place with the anatomical and a 2 mm and 6 mm lateralized or medialized joint line.ResultsWhen the joint line was medialized, increased deltoid muscle activity was recorded throughout glenohumeral joint elevation. The rotator cuff muscle forces increased with medialization of the joint line in the early phases of elevation. Lateralization of the joint line led to higher rotator cuff muscle forces after 52° of glenohumeral elevation and to higher absolute values in muscle activity. A maximum instability ratio of >0.6 was recorded with 6 mm of joint-line medialization.ConclusionIn this biomechanical study, medialization and lateralization of the normal joint line during total shoulder arthroplasty led to substantial load changes on the shoulder muscles used for stabilizing the arm in space. Specifically, medialization does not only lead to muscular shortening but also to increased load on the supraspinatus tendon during early arm elevation, the position which is already most loaded in the native joint.

Effective stretching positions for the posterior shoulder capsule as determined by shear wave elastography

Stretching is often used to prevent and treat posterior shoulder capsule tightness; however, the most effective stretching positions are not clearly defined. The purpose of this study was to identify the stretching positions that specifically applied the greatest passive tension on the posterior shoulder capsule by evaluating the elastic characteristics of posterior capsules and muscles in various stretching positions using ultrasound shear wave elastography (SWE). We evaluated 9 fresh-frozen shoulders (mean age 86.6 ± 7.7 years) without osteoarthritis or rotator cuff tears. All posterior shoulder tissues were preserved intact. Shear moduli of the middle and inferior posterior shoulder capsules and the posterior shoulder muscles were evaluated using SWE. We obtained shear modulus measurements in 9 stretching positions using a combination of glenohumeral elevation planes and angles (frontal, sagittal, scapular; -30°, 0°, 30°, 60°, respectively). A 4-Nm torque for shoulder internal rotation or horizontal adduction was applied in each position. We also measured shear moduli in the resting position (0° elevation with neutral shoulder internal/external rotation). We compared the shear moduli of all stretching and resting positions using 1-way repeated measures analysis of variance (P < .05). In addition, we compared the shear modulus in 2 positions (ie, resting and each stretching) among tissues (ie, capsules and muscles) with repeated measures using 2-way analysis of variance (P < .05). Shear modulus values for the middle posterior capsules in "internal rotation at 30° in scapular plane elevation" (28.7 ± 14.3 kPa, P = .01) and in "horizontal adduction at 60° of elevation" (31.1 ± 13.1 kPa, P < .001) were significantly higher than that of the resting position (11.0 ± 7.3 kPa). The shear modulus value for the inferior posterior capsule in "internal rotation at 30° of flexion" was significantly higher than that of the resting position (39.0 ± 17.3 vs. 15.4 ± 13.9 kPa, respectively; P = .004). Additionally, the shear modulus values for the posterior capsules in "internal rotation at 30° in scapular plane elevation and flexion" were significantly higher than that of the posterior shoulder muscles. Effective middle posterior shoulder capsule stretching positions were shoulder "internal rotation at 30° of scapular plane elevation" and "horizontal adduction at 60° of elevation." Shoulder "internal rotation at 30° of flexion" was the most effective position for the inferior posterior shoulder capsule. Stretching in these positions could relieve posterior shoulder capsule tightness and contribute to the prevention and treatment of throwing injuries of the shoulder.

Strain measurement of the deep layer of the supraspinatus tendon using fresh frozen cadaver: The influence of shoulder elevation

The shoulder is a uniquely complex large joint. Effective and safe physical therapy efforts towards rehabilitating injured and repaired shoulders requires a thorough understanding of shoulder mechanics from both generalized and very specific perspectives. Numerous biomechanical studies have been published on the shoulder. None of the studies, to our knowledge, considered the strain of the deep layers of the supraspinatus tendon for scapular plane elevation. Ten unilateral fresh-frozen human cadaveric specimens were used for the study. Scapular plane angles ranging from -10 to 30 degrees were evaluated for tensile loads, ranging from 0 to 120Newtons, exerted on the supraspinatus tendon. Strain measurements that specifically targeted the deep layer of the supraspinatus tendon during tensile loading were recorded. Strains recorded in the supraspinatus deep layer while increasing tendon force of the supraspinatus were significant for isometric gleno-humeral elevation of 30° and 20°. The response of strain to tendon force was less pronounced for 10° or less of gleno-humeral elevation. When performing isometric shoulder exercise regimens, rotator cuff forces and both surface and deep tendon strain, relative to scapular positioning, are relevant and should be considered.

Individual muscle force of the shoulder complex with different external loads and movements: a biomechanical simulation analysis

The analysis of the force produced by each muscle has great clinical relevance, guiding professionals to training or treatments that are more precise, specific, and individualized to structures and muscles of interest. The aim of this study was to estimate the individual muscle force of the shoulder complex during three shoulder movements with three different loads. Fifteen healthy male subjects with right upper limb dominance performed five repetitions of shoulder abduction, scapular plane elevation (scaption), flexion movement in 120° with a speed of 45°/s and the with a load defined as 5% of the subject weigth. The movements were evaluated in three situations: without external load, with dumbbell, and with elastic resistance. Dvideow software was used to analyze the kinematic data, and OpenSim software was used to estimate individual muscle force with an upper limb biomechanical model. Deltoid (anterior, middle and posterior), supraspinatus, infraspinatus, teres (major and minor), subscapularis, and long biceps brachii were estimated. For statistical analysis, a generalized estimating equation model was used with SPSS 20.0. Almost all muscles presented statistical differences (p<0.05) with varying loads in all tested movements. It can be concluded that despite the lack of validation for the present biomechanical model, we could see different individual muscle forces through different external loads identifying which exercise produce more force in certain muscles guiding a more specific rehabilitation/exercise program.

Measurement of scapular prominence in symptomatic dyskinesis using a novel scapulometer: reliability and the relationship to shoulder dysfunction

No previous studies have investigated whether the extent of scapular dyskinesis is associated with shoulder dysfunction. This study aimed (1) to establish the reliability of a scapulometer in patients with shoulder pain and (2) to investigate the related factors associated with shoulder dysfunction. One hundred participants with symptomatic scapular dyskinesis were recruited. Twenty-one participants were involved in the reliability study to test the intrarater and inter-rater reliabilities of the scapulometer in patients with shoulder pain. After demographic data and self-reported Flexilevel Scale of Shoulder Function (FLEX-SF) scores were recorded, all participants were measured with a scapulometer to determine the posterior displacement of the root of the spine (ROS) and the inferior angle (IFA) of the scapula from the thorax. Next, the participants performed 5 trials of bilateral scapular plane elevation for scapular kinematics and electromyographic (EMG) data collection. Stepwise multiple linear regressions were used to determine the relationships between self-reported FLEX-SF scores and potential factors. In addition to scapular displacement, pain level, scapular kinematics, and EMG data were included as independent variables. The intrarater and inter-rater reliabilities of the scapulometer were excellent (intraclass correlation coefficient [ICC] = 0.93-0.97) and moderate to good (ICC = 0.74-0.81), respectively. The Bland-Altman plots showed no systematic bias between raters in the ROS and IFA measurements. Final stepwise multiple regression models showed that more ROS distance, higher serratus anterior activity, and lower pain level during arm elevation were associated with higher shoulder function (total R2= 0.253). The reliability of the scapulometer in patients with shoulder pain is moderate to excellent. Scapular dyskinesis may be a compensatory strategy to avoid shoulder pain and improve shoulder function.

The comparison of acromiohumeral distance and scapular dyskinesis prevalence in females with and without rounded shoulder posture.

Background: Altered scapular kinematics in individuals with rounded shoulder posture (RSP) may affect acromiohumeral distance (AHD). The purpose of this study was to compare AHD and scapular dyskinesis prevalence in individuals with and without RSP. Methods: A total of 44 women (RSP, n=21; control, n=23) participated in the study. RSP was assessed by measuring acromion to table distance (ATD) in supine position and forward shoulder angle (FSA) using a camera and the AutoCAD software from the lateral side. According to these measurements, ATD more than 2.6 cm and FSA equal or more than 52° were considered as RSP. AHD was measured via ultrasonography with the arm at rest and 90 º of active elevation in scapular plane (scaption). Also, scapular dyskinesis was assessed by Uhl yes/no rating system. Independent and paired t tests were used to compare AHD between and within groups’ comparisons, respectively. Chi-square test was used to compare the scapular dyskinesis prevalence in individuals with or without RSP. The data were analyzed using the SPSS statistical software version 17. Significance level was set at 0.05 Results: There were no statistically significant differences in participants’ AHD in rest position (dominant side, p=0.187, nondominant side, p=0.144) and 90° scaption (dominant side, p=0.144, nondominant side, p=0.182) in each side between the 2 groups. Also, the results of chi-square test showed that there were not any significant differences in the prevalence of scapular dyskinesis during shoulder flexion (dominant side, p=0.653, nondominant side, p=0.541) and shoulder abduction (dominant side, p=0.141, nondominant side, p=0.277) in individuals with and without rounded shoulder postures. Conclusion: According to our results, RSD cannot lead to reduced AHD and higher prevalence of scapular dyskinesis.

SCAPULAR MUSCLE ELECTROMYOGRAPHIC ACTIVITY DURING ABDUCTION EXERCISES IN THE SCAPULAR PLANE IN THREE POSITIONS

Hyperactivity of the anterior deltoid (AD) has been shown to produce adverse effects on subacromial space width as a result of humeral head superior translation during rehabilitation exercises used with overhead athletes. Also, the importance of the ratio of upper trapezius (UT) to lower trapezius (LT) muscle activity has been examined during rehabilitation exercises particularly for those who develop scapular dyskinesis. The purpose of this study was to investigate the level of LT and SA muscle activity during scapular plane elevation (scaption) in three positions while maintaining a moderate level of AD muscle activity. A secondary purpose was to identify the ratio of UT to LT muscle activity during the varied scaption exercises. The authors hypothesized that the activation of these two important muscles and the UT/LT ratio would vary with exercise position and throughout the range of scapular plane elevation. Fourteen active young subjects performed scaption exercises in three different positions: standing (STAN), quadruped (QUAD), and prone (PRON) with three different weight loads: 0 kg, 1.8 kg, and 4.1 kg. Surface electromyography (EMG) was used to record muscular activity. Tested muscles included the UT, LT, SA, AD, and posterior deltoid muscles on the dominant side. QUAD scaption exercises with a load of 1.8 kg at 4 sec after the initial movement activated the LT muscle up to 49% of maximum voluntary isometric contraction (MVIC) while maintaining a moderate level of AD muscle activity (30% MVIC). STAN scaption exercises with the weight load of 1.8 kg at 3 sec after the initial movement activated 43% MVIC of the SA muscle while maintaining a moderate level of AD muscle activity (39% MVIC). The PRON condition generated significantly less SA muscle activity with both 1.8 and 4.1 kg weight loads than during the QUAD condition. The ratios of UT to LT muscle activity were significantly less in QUAD than those of STAN up to 4 sec after the initial movement. No significant difference was observed in the UT/LT ratio between QUAD and PRON conditions. QUAD scaption exercise effectively activated both LT and SA muscles without over activating the AD and produced favorable ratios of UT to LT muscle activity. Descriptive Cohort Study, Level 4.

Shoulder mechanical impingement risk associated with manual wheelchair tasks in individuals with spinal cord injury

BackgroundMost individuals with spinal cord injury who use manual wheelchairs experience shoulder pain related to wheelchair use, potentially in part from mechanical impingement of soft tissue structures within the subacromial space. There is evidence suggesting that scapula and humerus motion during certain wheelchair tasks occurs in directions that may reduce the subacromial space, but it hasn't been thoroughly characterized in this context. MethodsShoulder motion was imaged and quantified during scapular plane elevation with/without handheld load, propulsion with/without added resistance, sideways lean, and weight-relief raise in ten manual wheelchair users with spinal cord injury using biplane fluoroscopy and computed tomography. For each position, minimum distance between rotator cuff tendon insertions (infraspinatus, subscapularis, supraspinatus) and the coracoacromial arch was determined. Tendon thickness was measured with ultrasound, and impingement risk scores were defined for each task based on frequency and amount of tendon compression. FindingsPeriods of impingement were identified during scapular plane elevation and propulsion but not during pressure reliefs in most participants. There was a significant effect of activity on impingement risk scores (P < 0.0001), with greatest impingement risk during scapular plane elevation followed by propulsion. Impingement risk scores were not significantly different between scapular plane elevation loading conditions (P = 0.202) or propulsion resistances (P = 0.223). The infraspinatus and supraspinatus tendons were both susceptible to impingement during scapular plane elevation (by acromion), whereas the supraspinatus was most susceptible during propulsion (by acromion and coracoacromial ligament). InterpretationThe occurrence of mechanical impingement during certain manual wheelchair tasks, even without increased load/resistance, demonstrates the importance of kinematics inherent to a task as a determinant of impingement. Frequency of and technique used to complete daily tasks should be carefully considered to reduce impingement risk, which may help preserve shoulder health long-term.