Elevated Temperatures Research Articles

Compressible Hydrogels with Stabilized Chirality from Thermoresponsive Helical Dendronized Poly(phenylacetylene)s.

Fabrication of chiral hydrogels from thermoresponsive helical dendronized phenylacetylene copolymers (PPAs) carrying three-fold dendritic oligoethylene glycols (OEGs) is reported. Three different temperatures, i.e. below or above cloud point temperatures (Tcps) of the copolymers, and under freezing condition, were utilized, affording thermoresponsive hydrogels with different morphologies and mechanical properties. At room temperature, transparent hydrogels were obtained through crosslinking among different copolymer chains. Differently, opaque hydrogels with much improved mechanical properties were formed at elevated temperatures through crosslinking from the thermally dehydrated and collapsed copolymer aggregates, leading to heterogeneity for the hydrogels with highly porous morphology. While crosslinking at freezing temperature synergistically through ice templating, these amphiphilic dendronized copolymers formed hydrogels with highly porous lamellar structures, which exhibited remarkable compressible properties as human articular cartilage with excellent fatigue resistance. Amphiphilicity of the dendronized copolymers played a pivotal role in modulating the network formation during the gelation, as well as morphology and mechanical performance of the resulting hydrogels. Through crosslinking, these dendronized copolymers featured with typical dynamic helical conformations were transformed into hydrogels with unprecedently stabilized helicities due to the restrained chain mobilities in the three-dimensional networks.

Effect of crack on morphology evolution of the precipitates in Nickel-based superalloys under applied stress

Nickel-based superalloys are widely used in turbine blades and aviation engine due to their outstanding mechanical property at elevated temperatures. The superior mechanical property of nickel-based superalloys is highly relevant to the morphology evolution of γ′ precipitates in the γ matrix phase. At high temperature, the directional coarsening of γ′ precipitates may result in rafting behavior under applied stress. In addition, defects such as the cavities, inclusions and micro-cracks introduced during the manufacturing process in superalloys have significant influence on the evolution of the γ′ precipitates. In this work, a phase field model with crack and precipitate as order parameters has been proposed to investigate the effect of crack on the morphology evolution of the γ′ precipitates. The morphology evolution and volume fraction evolution of the γ′ precipitates in the Nickel-based superalloys with different cracks have been investigated under the tensile and shear stresses. It is found that the local high equivalent stress and high elastic strain energy near the crack lead to the migration of solute atoms from the high stress region to the low stress region. The migration of solute atoms results in the disappearance of the γ' phases in the vicinity of cracks, which is consistent with the experimental observation. The disappearance of the γ' phases around the crack reduces the volume fraction of the γ′ precipitates, which will affect the mechanical property of the superalloys.

Mechanism and growth kinetics of Al3Ti phase in fifteen-layered Ti Gr.1/A1050 clads produced with the explosive welding technique

This study was dedicated to the detailed characterization of the microstructural changes and the phase analysis of the interfaces formed in explosive welding of multilayered Ti Gr.1/A1050 clads. The significant effect of the detonation source localization on the microstructure of the welded materials interfaces after collision, and consequently on the diffusion processes induced by the elevated temperature was showed. Annealing process at 550 °C for series of time intervals of the Ti/Al clad allowed to determine the growth mechanism of the Al3Ti phase formed along particular interfaces. Moreover, the microstructure observations and calculations evidenced different growth mechanisms related to the localization of the Ti/Al interface in respect to the detonation source.

Temperature effects on adsorption and capillarity water retention mechanisms in constrained unsaturated soils

AbstractThis paper focuses on the impact of elevated temperatures on the adsorptive and capillarity water retention mechanisms of unsaturated soils under constrained (constant volume) conditions. This topic is critical for simulating the thermo-hydraulic behavior of soils in hydrogeological or geotechnical applications, including climate change effects on near surface soils, energy piles or soil borehole thermal energy storage systems in unsaturated soil layers, and buffers for geological nuclear waste repositories. A nonisothermal soil water retention curve (SWRC) that separately considers the temperature-dependency of the key parameters governing adsorptive and capillarity water retention mechanisms and soil physical parameters (e.g., surface tension, contact angle, adsorption capacity, cation exchange capacity, mean cavitation suction, air entry value and equilibrium film thickness) was developed to provide insights into the impact of temperature on water retention over the full suction range. The nonisothermal SWRC was validated using experimental data on high plasticity clays, with a good prediction of temperature effects on adsorption and capillarity water retention mechanisms in constrained unsaturated soils.

Synthesis of Mg2FeH6 by High‐Temperature High‐Pressure Reactive Planetary Ball Milling

Herein, a new approach for the synthesis of metal hydrides using simultaneous high‐temperature and high‐pressure reactive ball milling is demonstrated by preparing ternary magnesium iron hydride. The novelty and uniqueness of this technique are based on its integration of a specially designed and manufactured milling vial, allowing synthesis at controlled elevated temperatures (room temperature [RT]–400 °C) and pressures up to 100 bar. A Mg and Fe (2:1) mixture is used as a substrate for Mg2FeH6 synthesis. The effects of temperature on the synthesis kinetics and their outcomes are examined. An increase in the temperature accelerates the kinetics of hydrogen absorption for MgH2, while Mg2FeH6 formation is observed only above 250 °C. Increasing the reaction temperature not only causes magnesium particle refinement due to the hydrogenation and formation of magnesium hydrides but also leads to the agglomeration of iron caused by plastification due to a lack of strain hardening. The maximum conversion to Mg2FeH6 is observed for the sample premilled at RT. In this work, it is revealed that additional physical variables, e.g., pressure, temperature, time, and milling speed, during mechanochemical synthesis and material properties, need to be evaluated and considered to improve the reaction kinetics and yield of the synthesis.

Acclimation to moderate temperatures can have strong negative impacts on heat tolerance of arctic arthropods

Abstract The Arctic is impacted by some of the fastest temperature changes observed on Earth, but the impact on the terrestrial arthropod fauna is unclear. Acute physiological thermal limits of terrestrial ectotherms from high latitudes often exceed the local air temperatures, suggesting that they may be able to cope with increasing temperatures. However, knowledge on how Arctic terrestrial arthropods cope with elevated temperatures for longer periods is lacking. Here we investigate how acclimation temperature and exposure time affect the acute physiological heat tolerance of five terrestrial arthropod species (Neomolgus littoralis, Megaphorura arctica, Nysius groenlandicus, Psammotettix lividellus and Nabis flavomarginatus) immediately after collection in Arctic and sub‐Arctic habitats. We show that although acute heat tolerances are relatively high, even exposure to moderate (temperature span assessed ca. 3–29°C) acclimation temperatures for a 24 h period have strong negative effects on heat tolerance for four of the five species. Similarly, exposure time negatively affected heat tolerance, but depending on species and temperature. Together our results suggest that exposure to even moderately elevated temperatures for periods of 24 h or even shorter can lead to lower acute heat tolerance for cold adapted terrestrial arthropod species from sub‐Arctic and Arctic regions. Consequently, climate change leading to extended periods of mildly elevated temperatures may have strong negative effects on these species. We argue that this aspect is currently overlooked when assessing the ability of arthropods from Arctic and sub‐Artic regions to cope with climate changes as such predictions are typically based on acute heat tolerance estimates and with the assumption of beneficial acclimation responses. Read the free Plain Language Summary for this article on the Journal blog.

Tensile and bond properties at elevated temperatures of a PBO-FRCM composite system for strengthening concrete elements: Experimental and analytical investigations

This paper presents experimental and analytical investigations on the tensile and bond behaviour at elevated temperature of a polypara-phenylene-benzo-bisthiazole (PBO) fabric reinforced cementitious matrix (FRCM) system for strengthening concrete elements. Direct tensile (DT) and single lap direct shear tests (DS) were performed under steady-state conditions at the following temperatures: 20 °C, 85 °C, 150 °C, 230 °C and 300 °C. The results obtained were evaluated in terms of strength, stiffness, ultimate strain, load vs. slip response at the interface PBO FRCM/concrete and failure modes. Overall, the tensile and bond properties were significantly affected by the temperature increase. These results are mainly associated with the reductions of mechanical properties of the FRCM constituent materials as well as the degradation of the interaction between the fibres and the inorganic matrix at elevated temperatures. The experimental results were then used (i) to evaluate the suitability of the Aveston–Cooper–Kelly (ACK) model in describing the tensile response of FRCM at elevated temperatures and (ii) to calibrate temperature-dependent local shear bond stress vs. slip laws for the FRCM-concrete interaction.

Strong microwave squeezing above 1 Tesla and 1 Kelvin.

Squeezed states of light have been used extensively to increase the precision of measurements, from the detection of gravitational waves to the search for dark matter. In the optical domain, high levels of vacuum noise squeezing are possible due to the availability of low loss optical components and high-performance squeezers. At microwave frequencies, however, limitations of the squeezing devices and the high insertion loss of microwave components make squeezing vacuum noise an exceptionally difficult task. Here we demonstrate direct measurements of high levels of microwave squeezing. We use an ultra-low loss setup and weakly-nonlinear kinetic inductance parametric amplifiers to squeeze microwave noise 7.8(2) dB below the vacuum level. The amplifiers exhibit a resilience to magnetic fields and permit the demonstration of large squeezing levels inside fields of up to 2 T. Finally, we exploit the high critical temperature of our amplifiers to squeeze a warm thermal environment, achieving vacuum level noise at a temperature of 1.8 K. These results enable experiments that combine squeezing with magnetic fields and permit quantum-limited microwave measurements at elevated temperatures, significantly reducing the complexity and cost of the cryogenic systems required for such experiments.

Evidence for multiferroicity in single-layer CuCrSe2

Multiferroic materials, which simultaneously exhibit ferroelectricity and magnetism, have attracted substantial attention due to their fascinating physical properties and potential technological applications. With the trends towards device miniaturization, there is an increasing demand for the persistence of multiferroicity in single-layer materials at elevated temperatures. Here, we report high-temperature multiferroicity in single-layer CuCrSe2, which hosts room-temperature ferroelectricity and 120 K ferromagnetism. Notably, the ferromagnetic coupling in single-layer CuCrSe2 is enhanced by the ferroelectricity-induced orbital shift of Cr atoms, which is distinct from both types I and II multiferroicity. These findings are supported by a combination of second-harmonic generation, piezo-response force microscopy, scanning transmission electron microscopy, magnetic, and Hall measurements. Our research provides not only an exemplary platform for delving into intrinsic magnetoelectric interactions at the single-layer limit but also sheds light on potential development of electronic and spintronic devices utilizing two-dimensional multiferroics.

Oxidation of SiC fibers in water vapor

AbstractThe current study focuses on the role of composition in the oxidation behavior of three commercial SiC fibers (Hi‐Nicalon Type S (HNS), Tyranno ZMI, and Tyranno SA) in a steam‐containing environment at 1000°C. Oxide scales that form on each of the three fiber types differ in morphology, microstructure, and composition. Differences are attributed to O and C contents, crystallinity, and minor alloying elements. Oxidation kinetics of the HNS fibers follow linear/parabolic (Deal–Grove) predictions over the entire range of exposure times (to 96 h). In the other fibers, deviations from the initial linear/parabolic trend occur when either the scale crystallizes in situ during oxidation (as on the ZMI fibers) or when structural changes internal to the fiber alter the chemical environment at the scale/fiber interface (on the SA fibers). Adaptations of the linear/parabolic oxidation model are used to rationalize the growth kinetics in the latter two cases. Collectively, the data and analyses indicate a two‐fold difference in permeabilities of crystalline and amorphous silica scales. Inferred interface reaction rates further suggest faster oxidation for fibers with greater amounts of amorphous Si–O–C. Moreover, crystalline scales are more prone to cracking, because of their higher viscosity at elevated temperatures and a deleterious phase transformation upon cooling.

Effect of Hydrogen Charging on the Mechanical Properties of High-Strength Copper-Base Alloys, Austenitic Stainless Steel AISI 321, Inconel 625 and Ferritic Steel 1.4511

Hydrogen embrittlement (HE) poses the risk of premature failure for many metals, especially high-strength steels. Due to the utilization of hydrogen as an environmentally friendly energy source, efforts are made to improve the resistance to HE at elevated pressures and temperatures. In addition, applications in hydrogen environments might require specific material properties in terms of thermal and electrical conductivity, magnetic properties as well as corrosion resistance. In the present study, three high-strength Cu-base alloys (Alloy 25, PerforMet® and ToughMet® 3) as well as austenitic stainless AISI 321, Ni-base alloy IN 625 and ferritic steel 1.4511 are charged in pressurized hydrogen and subsequently tested by means of Slow Strain Rate Testing (SSRT). The results show that high-strength Cu-base alloys exhibit a great resistance to HE and could prove to be suitable for materials for a variety of hydrogen applications with rough conditions such as high pressure, elevated temperature and corrosive environments.

Influence of Zr-doping on the structure and transport properties of rare earth high-entropy oxides

Fluorite-type ceria-based ceramics are well established as oxygen ion conductors due to their high conductivity, superseding state-of-the-art electrolytes such as yttria-stabilized zirconia. However, at a specific temperature and oxygen partial pressure they occasionally exhibit electronic conduction attributed to polaron hopping via multivalent cations (e.g. Pr and Ce). (Ce, La, Pr, Sm, Y)O2−δ is a high-entropy oxide with a fluorite-type structure, featuring low concentrations of multivalent cations that could potentially mitigate polaron hopping. However, (Ce, La, Pr, Sm, Y)O2−δ undergoes a structural transition to the bixbyite-type structure above 1000 °C. In this study, we introduce Zr doping into (Ce, La, Pr, Sm, Y)O2−δ to hinder the structural transition at elevated temperatures. Indeed, the fluorite structure at elevated temperatures is stabilized at approximately 10 at.% Zr doping. The total conductivity initially increases with doping, peaking at 5 at.% Zr doping, and subsequently decreases with further doping. Interestingly, electronic conductivity in (Ce, La, Pr, Sm, Y)1−x Zr x O2−δ under oxidizing atmospheres is not significant and is lowest at 8 at.% Zr. These results suggest that ceria-based high-entropy oxides can serve as oxygen ion conductors with a significantly reduced electronic contribution. This work paves the way for new compositionally complex electrolytes as well as protective coatings for solid oxide fuel cells.

Thermal and electric field driven rf breakdown precursor formation on metal surfaces

The phenomenon of electric breakdown poses serious challenges to the design of devices that operate in high electric field environments. Experimental evidence points toward breakdown events that are accompanied by elevated temperatures and dark current spikes, which is attributed to high-asperity nanostructure formation that enhances the local electric field and triggers a runaway process. However, the exact mechanistic origin of such nanostructures under typical macroscopic operational conditions of electric field and magnetic-field-mediated heating remains poorly understood. In this work, we simulate the evolution of a copper surface under the combined action of the electric fields and elevated temperatures. Using a mesoscale curvature-driven surface evolution model, we show how a copper surface can undergo a type of dynamical instability that naturally leads to the formation of sharp asperities in realistic experimental conditions. Exploring the combined effect of fields and temperature rise, we identify the critical regimes that allow for the formation of breakdown precursors. The results show that thermoelastic stresses, while not essential, can significantly lower the critical electric field required for runaway surface instability, which is consistent with experimental observations that thermal effects can increase breakdown rates. Published by the American Physical Society 2024

High-temperature dielectric with excellent capacitive performance enabled by rationally designed traps in blends

Polymer dielectrics with excellent capacitive performance are urgently needed in advanced electrical and electronic systems. However, due to the dramatic increase in the conduction loss, the energy density and efficiency of polymers degrade severely at elevated temperatures, limiting their application in harsh environments up to 150 °C. Herein, an all-organic polyurea (PU)/polyetherimide (PEI) blend film is designed to prepare high-temperature polymer dielectric. It is found that carrier traps can be introduced by blending, and the hydrogen bond between PU and PEI increases the trap depth, leading to suppressed leakage current and enhanced breakdown strength, thus improving the energy storage performance. PU/30%PEI exhibits a high discharged energy density of ∼3.74 J/cm3 with an efficiency higher than 90% at 150 °C, which is 78% and 70% higher than pristine PU and PEI, respectively. This work provides a facile strategy to improve the energy storage performance of polymer dielectrics by introducing deep traps through blending.

Characterization and immunogenicity assessment of MERS-CoV pre-fusion spike trimeric oligomers as vaccine immunogen

ABSTRACT Middle East respiratory syndrome coronavirus (MERS-CoV) is a lethal beta-coronavirus that emerged in 2012. The virus is part of the WHO blueprint priority list with a concerning fatality rate of 35%. Scientific efforts are ongoing for the development of vaccines, anti-viral and biotherapeutics, which are majorly directed toward the structural spike protein. However, the ongoing effort is challenging due to conformational instability of the spike protein and the evasion strategy posed by the MERS-CoV. In this study, we have expressed and purified the MERS-CoV pre-fusion spike protein in the Expi293F mammalian expression system. The purified protein was extensively characterized for its biochemical and biophysical properties. Thermal stability analysis showed a melting temperature of 58°C and the protein resisted major structural changes at elevated temperature as revealed by fluorescence spectroscopy and circular dichroism. Immunological assessment of the MERS-CoV spike immunogen in BALB/c mice with AddaVaxTM and Imject alum adjuvants showed elicitation of high titer antibody responses but a more balanced Th1/Th2 response with AddaVaxTM squalene like adjuvant. Together, our results suggest the formation of higher-order trimeric pre-fusion MERS-CoV spike proteins, which were able to induce robust immune responses. The comprehensive characterization of MERS-CoV spike protein warrants a better understanding of MERS spike protein and future vaccine development efforts.

Exploring Climate-Induced Agricultural Risk in Saudi Arabia: Evidence from Farming Communities of Medina Region

Agriculture is vital to the Saudi Arabian economy since it provides food and other necessities to people living in rural areas, as well as those living in adjacent cities. Notwithstanding its considerable economic importance, the agricultural sector is confronted with formidable obstacles due to climate change, such as elevated temperatures, floods, extreme droughts, and decreased agricultural yields. Building a farming system capable of being climate resilient requires the comprehension of the vulnerabilities of farm households and related systems. This paper deals with the potential agricultural risks resulting from climate change in Saudi Arabia. In addition to concentrating on precipitation and temperature, the present research incorporates the three main components of the Climate Change Vulnerability Index (CCVI): sensitivity, exposure, and adaptive capability. The results of this research reveal a notable challenge that farmers in Saudi Arabia encounter, as they are very susceptible to the impacts of climate change. The Climate Change Vulnerability Index (CCVI) has a score of 0.730, signifying a substantial degree of vulnerability. The farmers in this region are very susceptible to uncertainties caused by climate change, as indicated by the significant exposure score of 0.725. This exposure comprises a wide range of concerns resulting from fluctuations in temperature, patterns of rainfall, and occurrences of severe weather, all of which have an immediate and negative effect on agriculture. Farmers in that region are more susceptible to the effects of climate change, which could jeopardize their livelihoods and agricultural operations, as shown by the susceptibility component (SVI) of 0.559. Moreover, the adaptive capacity (AVI) score of 0.567 highlights the fact that farmers have limited access to resources, skills, and experience, hindering their ability to tackle the challenges that have been caused by climate change in this region successfully. The results emphasize the immediate necessity for specific policies and assistance to enhance the resilience of agricultural communities in the area, as well as to mitigate the potential adverse effects of climate change on their livelihoods.

Geometry-induced process and part characteristics in support-free powder bed fusion of polypropylene at room temperature

AbstractLaser-based powder bed fusion (LPBF) of semi-crystalline polymers enables the support-free layer-wise manufacturing of geometrically diverse, complex components. In contrast to the established quasi-isothermal powder bed fusion of polymers at elevated temperatures, non-isothermal, cold processing strategies allow to significantly extend the range of applicable material systems. Relying on the superposition of discretized, fractal exposure strategies and the implicit mesoscopic compensation of crystallization shrinkage, the support-free LPBF of polypropylene at room temperature is demonstrated. The present paper displays the temporally and spatially discrete exposure of superposed fractal, space-filling curves that enable the support-free LPBF of polypropylene through combining the mesoscopic compensation of crystallization shrinkage and the laser-induced minimization of thermal shrinkage through the implementation of pre-exposure scans. The non-isothermal processing regime was observed to exhibit an intrinsic robustness towards the influence of processing parameters on emerging peak temperatures while showing a significant extent of accumulated heat within manufactured parts. Complementary mechanical characterizations showed an orientation-dependent influence of the applied energy density on emerging mechanical properties, correlated with geometry-dependent temporal process characteristics that implicitly influence the available coalescence time and the timespan available for the thermal homogenization.

Investigation on the blooming behavior of additives in nitrile butadiene rubber at elevated temperature

AbstractThe degradation of rubber performance in service environments is closely associated with the blooming behavior of additives in the rubber. This study investigates surface precipitates and changes in tensile properties of nitrile butadiene rubber (NBR) after storage at 85°C in air. The morphology, elemental composition, phase composition, and functional groups of the precipitates were analyzed by scanning electron microscopy, energy dispersion spectroscopy, X‐ray diffraction, and fourier transform infrared spectroscopy. Based on the morphology of internal rubber particles and precipitates and variations in the Zn/C mass ratio (ERZn), the reaction between zinc oxide and stearic acid in rubber under long‐term thermal environment was determined. Four stages of blooming for the mixture of zinc oxide and zinc stearate were inferred, and the impact of the blooming on the degradation of tensile properties of NBR was established. A dramatic decrease in the elongation at break (δk) of NBR was correlated with the blooming of zinc stearate and its correspondingly weakened plasticizing effect.Highlights The core‐shell structured mixture of ZnO and Zn(St)2 bloomed onto the surface of nitrile butadiene rubber. The ratio of mass percentages of Zn to C evaluated the blooming process of additives. The migration and blooming process of precipitates were divided into four stages. The decrease in elongation of the rubber was attributed to the blooming of Zn(St)2.

Visualizing Dynamic Single Atom Catalysis.

Many industrial chemical processes, including for producing fuels, foods, pharmaceuticals, chemicals and environmental controls, employ heterogeneous solid state catalysts at elevated temperatures in gas or liquid environments. Dynamic reactions at the atomic level play a critical role in catalyst stability and functionality. In-situ visualization and analysis of atomic-scale processes in real time under controlled reaction environments can provide important insights into practical frameworks to improve catalytic processes and materials. This review focuses on innovative real time in-situ EM methods, including recent progress in analytical in-situ environmental (scanning) transmission EM (ESTEM and ETEM) with single atom resolution for visualizing dynamic single atom catalysis under controlled flowing gas reaction environments. ESTEM studies of single atom dynamics of reactions, and of sintering deactivation, contribute to a better-informed understanding of the yield and stability of catalyst operations. Advances in in-situ technologies, including gas and liquid sample holders, nano-tomography and higher voltages, as well as challenges and opportunities in tracking reacting atoms, are highlighted. The findings show that the understanding and application of fundamental processes in catalysis can be improved, with valuable economic, environmental, and societal benefits. This article is protected by copyright. All rights reserved.

Impacts of elevated temperature and vapour pressure deficit on leaf gas exchange and plant growth across six tropical rainforest tree species.

Elevated air temperature (Tair) and vapour pressure deficit (VPDair) significantly influence plant functioning, yet their relative impacts are difficult to disentangle. We examined the effects of elevated Tair (+6°C) and VPDair (+0.7 kPa) on the growth and physiology of six tropical tree species. Saplings were grown under well-watered conditions in climate-controlled glasshouses for 6 months under three treatments: (1) low Tair and low VPDair, (2) high Tair and low VPDair, and (3) high Tair and high VPDair. To assess acclimation, physiological parameters were measured at a set temperature. Warm-grown plants grown under elevated VPDair had significantly reduced stomatal conductance and increased instantaneous water use efficiency compared to plants grown under low VPDair. Photosynthetic biochemistry and thermal tolerance (Tcrit) were unaffected by VPDair, but elevated Tair caused Jmax25 to decrease and Tcrit to increase. Sapling biomass accumulation for all species responded positively to an increase in Tair, but elevated VPDair limited growth. This study shows that stomatal limitation caused by even moderate increases in VPDair can decrease productivity and growth rates in tropical species independently from Tair and has important implications for modelling the impacts of climate change on tropical forests.