Elevated Pb Research Articles

Impact of lead and nickel contamination on metabolic health: Associations with diabetes mellitus in a pakistani cohort

Environmental exposure to heavy metals, particularly lead (Pb) and nickel (Ni), is implicated in chronic metabolic diseases, including diabetes mellitus (DM). This cross-sectional study assessed the Pb and Ni levels in groundwater using ICP-OES and urine samples collected from 2688 participants using ICP-MS. We aimed to establish the associations between Pb and Ni exposure and risk factors for DM and metabolic disorders. Groundwater analysis revealed the elevated levels of total dissolved solids, electrical conductivity, hardness, turbidity, Ni, and Pb, exceeding the WHO guidelines. The mean concentration of Pb in groundwater samples of study area was 0.025 mg/L which was higher than the WHO permissible limit of 0.01 mg/L. Similarly the mean concentration of Ni in groundwater samples of study area was 0.038 mg/L which was also higher than the WHO permissible limit of 0.02 mg/L. In human study, participants, categorized into Pb-detected and Ni-detected groups, exhibited significantly higher Pb and Ni levels and non-exposed non-diabetic groups. Ni-detected diabetics showed elevated Ni levels compared to non-exposed non-diabetics. Similarly, Pb-detected diabetics showed elevated Pb levels compared to non-exposed non-diabetics. These findings suggest a potential contribution of Pb and Ni exposure to DM development. The study also identified associations between heavy metal exposure and disruptions in various biomarkers related to DM, lipid profile, inflammation, oxidative stress, liver function, and kidney function. Pb-detected diabetics demonstrated elevated levels of glycemic index biomarkers, including fasting blood glucose (P < 0.0001) and HbA1c (P < 0.0001). Ni-detected diabetics exhibited increased inflammatory markers, such as CRP (P < 0.0001) and IL-6 (P < 0.0001). Both Pb and Ni exposure were associated with dyslipidemia, as indicated by elevated levels of total cholesterol (P < 0.0001) and LDL (P < 0.0001). Additionally, heavy metal exposure was linked to impaired liver and kidney function, supported by elevated levels of AST (P < 0.0001), ALT (P < 0.0001), creatinine (P < 0.0001), and blood urea nitrogen (P < 0.0001), with Pb exposure also associated with higher levels of MDA (P < 0.0001). Correlation analyses demonstrated significant associations between urinary Pb and Ni concentrations and various biomarkers related to DM and metabolic disorders. In conclusion, this study provides substantial evidence linking Pb and Ni exposure to the development of DM and metabolic disorders in a Pakistani population, emphasizing the need for strict regulations and preventive measures to reduce heavy metal contamination and safeguard public health. Future longitudinal studies and interventions are warranted to elucidate mechanistic links between heavy metal exposure and metabolic diseases.

Mixed lead sources in tin metal: Implications for using lead isotopes to study tin artifacts

Methods for provenancing copper, lead, and silver using the isotopic composition of lead are well-established. Lead isotope analysis holds promise for the study of tin metal as well, as long as one accounts for the U-Th-Pb systematics of cassiterite (SnO2) and chaîne opératoire of tin production. Although Precambrian cassiterite may contain 10s of ppm Pb or more (predominantly radiogenic 206Pb), Phanerozoic examples typically contain only a few parts per million Pb. However, all but one of the 133 raw tin ingots excavated from European Bronze Age shipwrecks contains more Pb than could have come from cassiterite alone, as do six of the twelve analyzed tin objects interpreted to have been derived from the ores of southern Africa. Accordingly, almost all tin objects must contain Pb from external cassiterite sources and interpretation of LIA must account for this contamination. The nature of the contaminant (sulfides, U-Th-bearing minerals, silicates) can be inferred from patterns in Pb concentration and LI values. The 3 major sources of Pb that can typically be identified in tin artifacts are original Pb from the tin ore, radiogenic Pb produced in-situ due to U decay, and external Pb added during the cassiterite smelting and ingot production. As cassiterite has high U/Pb but low Th/Pb, the 208Pb/204Pb may be representative of the initial Pb incorporated in the mineral. This is assuming either that no external Pb is added during the ore processing or that the added Pb is from coeval sulfides from the same Pb ore provenance. In such cases 208Pb/204 Pb can be used to estimate a Pb model age, which in turn can be used for provenance estimate of the ingots. If the addition of Pb is from U-Th-mineral contaminants to the ore concentrate, then this will also increase 208Pb/204Pb and point to erroneously young model Pb ages. In such cases, the problem would be evident in positively correlated values of 206Pb/204Pb and 208Pb/204Pb. If Pb concentrations are above a certain threshold (approximately 5 ppm). LIA typical common Pb isotope ratios will be clear indication that external, non-cassiterite Pb, is added to the tin artifact. This tin could be from impurities in the ore (e.g., inclusions in cassiterite, impurities in the ore concentrate, or added during ore smelting and/or metal processing. Overall, elevated Pb concentrations accompanied with non-radiogenic Pb isotopes typical for common Pb, is a clear indication that significant amount of external (contaminant) Pb is added to the tin artifact.

The Relationship Between Metal Exposure and HPV Infection: Evidence from Explainable Machine Learning Methods.

HPV is a ubiquitous pathogen implicated in cervical and other cancers. Although vaccines are available, they do not encompass all subtypes. Meanwhile, metal exposure may elevate the risk of HPV infection and amplify its carcinogenic potential, but studies to further elucidate this relationship are insufficient.This study entailed a cross-sectional analysis utilizing data from the National Health and Nutrition Examination Survey (NHANES) 2007-2016. The study sample comprised 2765 women. Multivariate logistic regression was employed to examine the association between single metal exposure and HPV infection, weighted quantile sum (WQS) regression was utilized for assessing the mixed metal exposure effect, and the XGBoost + SHapley Additive exPlanations (SHAP) to evaluate the contribution of metal exposure in HPV infection.Multivariate logistic regression analysis indicated that elevated Co concentration was inversely associated with HPV infection (OR 0.891; 95% CI 0.814-0.975), while elevated Pb concentration correlated with an increased HPV infection (OR 1.176; 95% CI 1.074-1.287). Regression analysis of the WQS for mixed metal exposure suggested that the WQS index was potentially linked to an increased likelihood of HPV infection in the positive direction (OR 1.249; 95% CI 1.052-1.482), with no significant association observed in the negative direction (OR 0.852; 95% CI 0.713-1.017). SHAP analysis prioritized the importance of characteristics: number of sexual partners, marital status, poverty-to-income ratio (PIR), Co, Pb, and alcohol consumption.Exposure to Pb was associated with an increase in the incidence of HPV infection, whereas Co exposure demonstrated an inverse relationship. The composite exposure to multiple metals showed a positive association with the prevalence of HPV infection. These findings indicate that exposure to metals could potentially escalate the prevalence of HPV infection.

Is the milk we drink safe from elevated concentrations of prioritised heavy metals/metalloids? – A global systematic review and meta-analysis followed by a cursory risk assessment reporting

Milk has been globally recognised as a comprehensive and vital food source for centuries. However, the presence of heavy metals and metalloids (metal(loid)s) in milk is a global problem. As metal(loid)s are present in the soil due to natural geogenic and various anthropogenic activities, these metal(loid)s are bio-transferred into animal feed, which further results in the presence of metal(loid)s in milk due to bio transfer/accumulation. This systematic review collated information from published literature between 2000 and 2021. It focused on the global issue of metal(loid)s in milk, posing potential health risks. These contaminants enter the food chain through the bio-transfer/accumulation process from soil to animal feed to milk. The key metal(loid)s examined are arsenic (As), mercury (Hg), lead (Pb), and cadmium (Cd). A meta-analysis of 66 selected papers revealed the widespread presence of these contaminants in milk samples globally, with Pb being the most studied (43 %). This research estimated metal(loid)s levels or concentrations as 12.71 (95 % Confidence Interval (CI) = 0.16–25.26), 16.09 (95 % CI = 4.31–27.70), 197.04 (95 % CI = 75.28–318.18), 31.67 (95 % CI = 20.14–43.20) μg/kg (ppb) for As, Hg, Pb, and Cd, respectively using Stata™. The metal(loid) concentrations in milk were within the threshold limits other than Pb and Cd. Some studies in America, Africa, and Asia reported elevated Pb and Cd concentrations, raising health concerns. The simulated Risk Quotients (RQ) and Integrated Risk Quotient (IRQ) values generally remain above one, indicating potential human health risks. Notably, the IRQ value increases with more metal(loid)s consideration. Subgroup analysis indicates low-fat milk contains higher metal(loid)s concentrations. While metal(loid)s concentrations in milk largely comply with safety limits, some regions exhibit concerning concentrations. Therefore, continued surveillance to address potential health risks associated with metal(loid)s in milk is necessary to ensure dairy products' safety.

Compost amendment in urban gardens: elemental and isotopic analysis of soils and vegetable tissues

Urban horticulture poses a sustainable form of food production, fosters community engagement and mitigates the impacts of climate change on cities. Yet, it can also be tied to health challenges related to soil contamination. This work builds on a previous study conducted on eleven urban gardens in the city of Vienna, Austria. Following the findings of elevated Pb levels in some soil and plant samples within that project, the present study investigates the elemental composition of soil and plants from two affected gardens 1 year after compost amendment. Inductively coupled plasma mass spectrometry (ICP-MS) analysis of skin, pulp and seeds of tomato fruits revealed minor variations in elemental composition which are unlikely to have an impact on food safety. In turn, a tendency of contaminant accumulation in root tips and leaves of radishes was found. Washing of lettuce led to a significant reduction in the contents of potentially toxic elements such as Be, Al, V, Ni, Ga and Tl, underscoring the significance of washing garden products before consumption. Furthermore, compost amendments led to promising results, with reduced Zn, Cd and Pb levels in radish bulbs. Pb isotope ratios in soil and spinach leaf samples taken in the previous study were assessed by multi-collector (MC-) ICP-MS to trace Pb uptake from soils into food. A direct linkage between the Pb isotopic signatures in soil and those in spinach leaves was observed, underscoring their effectiveness as tracers of Pb sources in the environment.Graphical

An Evaluation of Long-Term Contaminated Soil from a Manufactured Gas Plant for in Situ Biodegradation Potential and as a Source of Ferrocyanide-Degrading Bacteria

Despite the high abundance and potential toxicity of ferrocyanide in the environment, data on the bioremediation of these complexes in contaminated soils are missing. In this study we isolated forty bacterial species presented in soil highly contaminated with ferrocyanide complexes, originating from a Manufactured Gas Plant (MGP). All bacterial strains were resistant to ferrocyanide (500 mg L−1). Six isolates showed better growth in the presence of ferrocyanide and were able to use it as a sole nitrogen source. One of them was able to assimilate ferrocyanide‐derived nitrogen and carbon. The strains varied in their tolerance to the ferrocyanide. The Minimum Inhibitory Concentration (MIC) values determined in the rich medium ranged from 1400 mg L−1 to 2000 mg L−1 and in all cases were greater than those set on the minimal medium. Molecular analysis revealed that the investigated isolates had the highest similarity to the Bacillus and Rummeliibacillus lineages. Rummeliibacillus was recognized for the first time for its ferrocyanide-degrading potential. Soil samples collected from MGP sites indicated that the overall indigenous population of microorganisms was low. Total cyanide content ranged from 220 mg kg−1 to 346 mg kg−1. Additionally, elevated Pb concentrations and an imbalanced C:N:P ratio were observed. Our study provides new information about the presence of a well-acclimated bacterial community associated with long-term ferrocyanide-contaminated soil. This bacterial community could play an important role in MGP site bioremediation processes and has the potential for application for other bioremediation purposes; however, it is likely limited due to unfavorable environmental conditions.

A novel approach to heavy metal immobilization in municipal solid waste incineration fly ash: Investigating the use of chicken eggshell waste and CaO addition

Municipal solid waste incineration (MSWI) fly ash is a significant byproduct of waste-to-energy processes, and poses substantial environmental and health hazards if not treated properly. The process of Stabilization/Solidification (S/S) efficiently immobilizes hazardous elements present in the fly ash through a combination of physical and chemical mechanisms. The objective of this research is to thoroughly examine the feasibility of using chicken eggshell waste powder as a stabilizing agent for heavy metals, specifically targeting Pb, in MSWI fly ash. Experimental analysis involved varying eggshell waste to fly ash weight proportions, extending from 0.0 (control group), 7:3 up to 9.5:0.5 ratio, with designated curing durations of 2 and 72 hours, and maintaining a liquid-to-solid (L/S) ratio at 1.0 mL/g. In the two-hour curing period, the immobilization efficiency of Pb reached 100% with the addition of only 1.5% eggshell waste. Optimal ratios for Pb stabilization in MSWI fly ash were identified: maximum 2% eggshell waste for 2-hour curing and 1.5% for 72 hours due to elevated Pb and Cd levels of 7:3 ratio. Adding CaO mitigated these levels, enhancing stabilization and compliance with landfill criteria. The results demonstrated that the addition of CaO led to efficient immobilization of Pb, achieving approximately 99%. In addition, the observed enhancement in compressive strength resulting from the incorporation of CaO highlights its effectiveness in enhancing the stabilizing process of MSWI fly ash. By demonstrating the effectiveness of eggshell waste and CaO in stabilizing hazardous elements, this study advocates for scalable solutions and further research on long-term stability and environmental impacts.

Hormonal, liver, and renal function associated with electronic waste (e-waste) exposure in Dhaka, Bangladesh

Electronic waste (e-waste) contains numerous metals and organic pollutants that have detrimental impacts on human health. We studied 199 e-waste recycling workers and 104 non-exposed workers; analyzed blood, urine, and hair samples to measure heavy metals, hormonal, liver, and renal function. We used quantile regression models to evaluate the impact of Pb, Cd, and Hg on hormonal, liver and renal function, and the role of DNA oxidative damage in mediating the relationship between exposures and outcomes. Exposed workers had higher blood lead (Pb) (median 11.89 vs 3.63 µg/dL), similar blood cadmium (Cd) (1.04 vs 0.99 µg/L) and lower total mercury (Hg) in hair (0.38 vs 0.57 ppm) than non-exposed group. Exposed workers also had elevated median concentrations of total triiodothyronine (TT3), aspartate aminotransferase (AST), alanine aminotransferase (ALT), urinary albumin, albumin creatinine ratio (ACR) and estimated glomerular filtration rate (eGFR) were significantly higher than non-exposed group (p≤0.05). Sex hormones including luteinizing hormone, follicle stimulating hormone, estrogen, progesterone and testosterone concentrations were not significantly different between exposed and non-exposed (all p≥0.05). The median concentration of ALT was 4.00 (95% CI: 0.23, 7.77), urinary albumin was 0.09 (95% CI: 0.06, 0.12) and ACR was 1.31 (95% CI: 0.57, 2.05) units higher in the exposed group compared to non-exposed group. Pb was associated with a 3.67 unit increase in the ALP (95% CI: 1.53, 5.80), 0.01 unit increase in urinary albumin (95% CI: 0.002, 0.01), and 0.07 unit increase in ACR (95% CI: 0.01, 0.13). However, no hormonal, renal, and hepatic parameters were associated with Cd or Hg. Oxidative DNA damage did not mediate exposure-outcome relationships (p≥0.05). Our data indicate e-waste exposure impairs liver and renal functions secondary to elevated Pb levels. Continuous monitoring, longitudinal studies to evaluate the dose-response relationship and effective control measure are required to protect workers from e-waste exposure.

Recuperative Effects of Cinnamon (Cinnamomum zeylanicum) in Catla catla After Sub-Lethal Exposure to Lead.

This research was conducted to validate the beneficial effects of incorporating dietary cinnamon (Cinnamomum zeylanicum) powder (CzP) in alleviating lead (Pb) poisoning in fish. Healthy Catla catla individuals (16.36 ± 0.19g/fish) were distributed across 18 tanks in triplicate groups. The experimental groups were as follows: Control group: fish without supplementation or exposure to Pb; positive control group: fish without supplementation but exposed to 1mg/L Pb; 5g/kg CzP along with 1mg/L Pb exposure; 10g/kg CzP along with 1mg/L Pb exposure; 15g/kg CzP along with 1mg/L Pb exposure; and 20g/kg CzP along with 1mg/L Pb exposure. The trial continued for a period of 60days. Waterborne Pb had a deleterious effect on fish growth performance, body composition, blood profile, and digestive enzyme activity, along with elevated Pb accumulation in various tissues. Conversely, consumption of cinnamon effectively mitigated the toxic potential of Pb and enhanced fish longevity. Notably, 10g/kg CzP boosted growth, improved carcass quality, reversed blood indices, restored enzyme function in the gut, and mitigated Pb accumulation in tissues. In summary, the findings revealed that incorporating 10g/kg of CzP as a dietary supplement in C. catla aquaculture could effectively counteract heavy metal toxicity.

Occurrence of heavy metals coupled with elevated levels of essential elements in chocolates: Health risk assessment

The presence of contaminants in cacao-derived products, especially in chocolates, has raised concerns regarding food safety and human health. The study assessed the concentration variation of 16 elements in 155 chocolate samples from the US market by cacao content and country of geographic origin. The study further examined the potential health risks posed by toxic metals and determined the contribution of essential elements to the Daily Recommended Intake (DRI), estimated based on an ounce (∼28.4 g) of daily chocolate consumption. Dark chocolates with ≥50 % cacao exhibited consecutively increasing mean levels from 1.2 to 391 µg/kg for U, Tl, Th, As, Pb, Se, Cd, and Co. Similarly, Ni, Sr, Cu, Mn, Zn, Fe, Ca, and Mg had mean concentrations from 4.0 to 1890 mg/kg. Dark chocolates sourced from Central and South America exhibited the highest mean levels of Cd, and South America samples also contained elevated Pb, whereas those from West Africa and Asia had low Cd and Pb, respectively. Cacao contents showed increasingly strong association with Cd, Co, Mn, Sr, Ni, Cu, Zn, and Mg (r = 0.60–0.84), and moderately with Se, Fe, As, and Tl (r = 0.35–0.49), indicating these elements are primarily derived from cacao beans. Weak association of cacao contents with Pb, Th, and U levels (r < 0.25), indicates post-harvest contaminations. Hazard Quotient (HQ) > 1 was found only for Cd in 4 dark chocolates, and Hazard Index (HI) > 1 for cumulative risk of Cd, Pb, Ni, As, and U was found in 33 dark chocolates, indicating potential non-carcinogenic risks for 15 kg children but none for 70 kg adults. Dark chocolate also substantially contributed to 47–95 % of the DRI of Cu for children and 50 % for adults. Dark chocolates also provided notable Fe, Mn, Mg, and Zn contributions to the DRI. These essential elements are recognized to reduce the bioavailability of toxic metals such as Cd, Pb, or Ni, thereby potentially lowering associated health risks. This study informs consumers, food industries, and regulatory agencies to target cacao origins or chocolate brands with lower toxic metal contents for food safety and minimizing adverse health effects.

Bioaccumulation of metals in Spartina alterniflora salt marshes in the estuary of the World's Largest Choked Lagoon.

Salt marshes are capable of mitigating metal pollution in coastal environments, yet the efficacy of this remediation is contingent upon various environmental factors and the plant species involved. This study investigates the influence of different anthropogenic activities, including industrial, urban, recreational (in an insular area), and dredging operations, on the bioaccumulation of eight metals (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) within Spartina alterniflora Loisel. in the Patos Lagoon estuary, Brazil. The research aims to assess the pattern of metal bioaccumulation and distribution within the plant's leaves, stems, and roots while also examining metal presence in the sediment. Our main findings reveal that S. alterniflora exhibited elevated metal levels in its plant structure directly related with the metal concentrations in the surrounding sediment, which, in turn, is related to the different anthropogenic activities. The industrial area presented the highest metal levels in sediment and plant sections, followed by dredging, insular, and urban areas. This same pattern was mirrored for the bioconcetration factors (BCF), with the BCFs consistently indicating active metal bioaccumulation across all areas and for most of the metals. This provides evidence of the metal bioaccumulation pattern in S. alterniflora, with elevated BCFs in areas affected by activities with a higher degree of impact. Translocation factors (TF) showed varying metal mobility patterns within the plant's below-ground and above-ground sections across the different areas, with only Hg exhibiting consistent translocation across all study areas. Zn was the primary metal contributor in all plant sections, followed by Pb and Cu. It is worth noting that Pb is a non-essential metal for this plant, highlighting the relationship between elevated Pb contributions in the plant sections and the bioaccumulation of this metal within the plant's structure. Overall, this study emphasizes the bioaccumulation capacity of S. alterniflora and elucidate the intrinsic connection between different anthropogenic activities and their impact on the resultant availability and bioaccumulation of metals by this salt marsh plant.

Are lead, cadmium and mercury risk factors for resistant hypertension?

BackgroundLead (Pb), cadmium (Cd) and mercury (Hg) are toxic trace elements that represent a public health problem as risk factors for cardiovascular disease and hypertension (HT) and could also contribute to the development of resistant hypertension (rHT) AimsTo compare the blood concentrations of Pb, Cd and Hg in subjects with resistant and non-resistant HT and to define whether there is a relationship between its levels and rHT. MethodsCross-sectional study. Subjects aged ≥ 21 to ≤ 80 years with a body mass index < 40 kg/m2 were recruited on a discretionary basis from October 2001 to October 2004 in a hypertension unit of a tertiary hospital amongst those sent to the hypertension unit by their family physician. Resistant hypertension was defined according to the American Heart Association (AHA) criteria. Whole blood concentrations of Cd, Pb and Hg were measured by electrothermal atomic absorption spectrometry. Results46 out of 73 included subjects (63%) suffered from rHT. Blood Pb median: HT 3.9 (IQR 2.7–5.2) vs. rHT 3.6 (IQR 2.8–6.0) µg/dL (p=0.941). Blood Cd median: HT 0.07 (IQR 0.07–0.80) vs. rHT 0.30 (IQR 0.07–0.65) µg/L (p=0.681). Blood Hg median: HT 7.9 (IQR 5.8–12.9) vs. rHT 7.3 (IQR 4.6–13.3) µg/L (p=0.611). Considering the 75th percentile of each element (Pb: 5.55 µg/dL, Cd: 0.75 µg/L, Hg: 13.15 µg/L), a multiple logistic regression analysis (adjusted for age, BMI, diabetes mellitus, clearance of creatinine and only for Cd the smoking habit) showed an OR = 3.44 (0.84–14.10, p=0.086) for Pb, OR = 1.80 (0.39–8.24, p=0.451), for Cd and OR = 2.31 (0.59–9.14, p=0.232) for Hg. Moreover, the stratified analyses showed that men with Pb ≥5.55 µg/dL have a 14 times higher risk of suffering from rHT (p=0.026). Interestingly, a 9-fold increased risk was found for non-obese subjects with elevated Pb levels, above 5.55 µg/dL (p=0.029). Also in men, the probability of suffering from rHT was more than 7 times higher if Cd levels were ≥ 0.75 µg/L (p=0.076). Most smokers had higher Cd levels, with a high risk of suffering from rHT (ORa 12.6 (0.8–200.2), p=0.072). ConclusionA higher blood Pb levels, defined by the 75th percentile (Pb ≥ 5.55 µg/dL), is associated with a greater risk of suffering from rHT and to a lesser extent in the case of Cd and Hg.

Chemophysical and Metallic Characterization of Surface Water and Precipitation for Environmental Quality Assessment in Oyigbo L.G.A., Rivers State, Nigeria

This study investigates the repercussions of oil industry operations on environmental quality in the Niger Delta, with a specific focus on atmospheric soot contamination. By conducting chemophysical and metallic characterization of surface water (river) and precipitation (rain) in Oyigbo, Rivers State, Nigeria, the research evaluates various chemical and physical parameters, like pH, electrical conductivity (EC), total suspended solids (TSS), turbidity, as well as concentrations of heavy metals like lead (Pb), copper (Cu), cadmium (Cd), and zinc (Zn). The findings uncover a slightly acidic to neutral pH in water samples. The elevated EC in the Imo River, while meeting WHO standards, highlights the delicate balance between industrial development and environmental health. Turbidity values, meeting WHO standards but exceeding limits in some rainwater samples, prompt scrutiny of anthropogenic influences, with fishing and sand mining emerging as potential contributors to river turbidity, while TSS values, though higher along the Imo River, remain within WHO standards. Results reveal Cd, Cu, and Zn adhere to standards, while the elevated Pb levels necessitate further exploration into contamination sources. The heavy metals pollution index (HPI) categorizes the area as polluted and identifies lead as the primary contributor, underlining the urgency of interventions. The potential ecological risks index (PERI) classifies the pollution risk as slight, indicating a low ecological risk level, and reveals risk hierarchies, in the order of metals contributing to pollution as Pb &gt; Cu &gt; Cd &gt; Zn for both river and rainwater. This study unravels the relationship between industrial activities and water quality in Oyigbo, contributing substantively to sustainable water resources and environmental management. The detailed findings stand as a cornerstone for informed decision-making, aiming to mitigate environmental impacts and safeguard ecosystems and communities reliant on vital water sources.

Impact of coconut-fiber biochar on lead translocation, accumulation, and detoxification mechanisms in a soil–rice system under elevated lead stress

Biochar, an environmentally friendly material, was found to passivate lead (Pb) in contaminated soil effectively. This study utilized spectroscopic investigations and partial least squares path modeling (PLS-PM) analysis to examine the impact of coconut-fiber biochar (CFB) on the translocation, accumulation, and detoxification mechanisms of Pb in soil-rice systems. The results demonstrated a significant decrease (p < 0.05) in bioavailable Pb concentration in paddy soils with CFB amendment, as well as reduced Pb concentrations in rice roots, shoots, and brown rice. Synchrotron-based micro X-ray fluorescence analyses revealed that CFB application inhibited the migration of Pb to the rhizospheric soil region, leading to reduced Pb uptake by rice roots. Additionally, the CFB treatment decreased Pb concentrations in the cellular protoplasm of both roots and shoots, and enhanced the activity of antioxidant enzymes in rice plants, improving their Pb stress tolerance. PLS-PM analyses quantified the effects of CFB on the accumulation and detoxification pathways of Pb in the soil–rice system. Understanding how biochar influences the immobilization and detoxification of Pb in soil–rice systems could provide valuable insights for strategically using biochar to address hazardous elements in complex agricultural settings.

Assessment of Heavy Metal Pollution from Granite Quarrying in Akure, Nigeria

This study investigated the heavy metals pollution of granite quarrying activities in Akure, Ondo State, Nigeria. Three quarries and a control site were selected for this study. Plants and soil samples were collected at 0, 50, 100, 150 and 200 m away from the crushing points, while samples were collected away from roadside for control. Water samples were collected at just a point. Concentration of heavy metals in collected samples was determined using Buck Scientific Atomic Absorption Spectrophotometer model 210 VGP. The mean total heavy metal contents in C. odorata and P. purpurem collected within 0 to 200 m showed that Pb, Fe, Zn, Cr Co and Cd contents were above the WHO permissible limit while only Pb content (190.8, 299.20 and 208.80 ppm) and Fe (7559.50, 13386.50 and 19019.50 ppm for Dortmond, Ebenezer and Samchase quarries respectively) were above the permissible limit in soil samples. Elevated Pb, Fe, Cr, and Ni were recorded in water samples collected from quarry sites while values recorded for control sites falls within the permissible limit except for the lead concentration of 0.10 ppm as against the maximum concentration of 0.05 ppm set by WHO. Zn, Mn, Cd and and Cu were not detected in all water samples. Higher pH values were also recorded in soil and water samples from quarry sites. This study has shown that quarrying introduces toxic heavy metals into nearby environment.

Variability of rare earth and heavy metal elements in a representative alluvial depositional system.

Heavy metals (Ni, Cr, W, Cd, and Pb) and rare earth elements (REE) were investigated in the flood plain sediments of an island of the lower Yangtze River near Nanjing to determine how the vertical distribution of heavy metals could be affected by natural sedimentation processes and anthropogenic contamination. Stratigraphic analyses of magnetic susceptibility and the mean grain size distribution of the deposits enabled us to identify layers associated with a relatively high influx of suspended sediments that resulted in sudden changes in the concentrations of heavy metals. The results show that layers associated with high sediment influx (0.8m depth) displayed low concentrations of Cr, Ni, W, and Cd that were mainly lithogenic in origin. The Post Archean Australian Shale (PAAS) normalized REE patterns in the flood plain cores were enrichment in Ce and Eu relative to PAAS, indicating that the sediments were most likely derived from a mixture of sediments and not from an anthropogenic source. Sharp increases in Y/Ho ratios, as well as heavy metal (Cd, Cr, Ni, and W) and Y concentrations were observed in the uppermost layer that could have been deposited from the rapid transport of sediment-laden, contaminated waters. The temporal (vertical) trends in Pb concentrations may be strongly influenced by coal burning. Elevated Pb concentrations (350ppm and 1000ppm) correlate with high magnetic susceptibility (> 200 m3 × kg-1) and the history of thermal power plant (1910-2002) activity. The anthropogenic inputs of Pb were, however, not diluted by high suspended sediment loads, which supports the argument that Pb was derived from fly ash.

Assessment of heavy metals among auto workers in metropolitan city: a case study.

In recent decades, heavy metals (HMs) have emerged as a global health concern. Unfortunately, in Pakistan, there is a general lack of awareness regarding the potential health risks associated with HMs pollution among automobile workers. Herein, we investigated the concentration of heavy metals such as lead (Pb), cadmium (Cd), and chromium (Cr) among automobile workers who were occupationally exposed in Mingora City, Khyber Pakhtunkhwa, Pakistan. Three different automobile groups, i.e., battery recyclers, spray painters, and mechanics were studied in detail. A total of 40 blood samples were collected from automobile workers groups while 10 blood samples were collected as control individuals from different locations in the study area. We investigated heavy metals concentration with a standard method using an atomic absorption spectrometer AAS (PerkinElmer Analyst 700, United States). Based on our findings, the battery recycling group displayed the most elevated Pb levels (5.45 ± 2.11 μg/dL), exceeding those of both the spray painters' group (5.12 ± 1.98 μg/dL) and the mechanics' group (3.79 ± 2.21 μg/dL). This can be attributed to their higher exposure to Pb pollution resulting from the deterioration, dismantling, grinding, or crushing of old batteries. In the context of chromium (Cr) exposure, a similar trend was observed among the battery recycling group, as well as the spray painters and mechanics groups. However, in the case of cadmium (Cd), the mechanics' group exhibited the highest level of exposure (4.45 ± 0.65 μg/dL), surpassing the battery recycling group (1.17 ± 0.45 μg/dL) and the spray painters' group (1.35 ± 0.69 μg/dL), which was attributed to their greater exposure to welding fumes and other activities in their workplace. We believe that our findings will encourage regulatory measures to improve the health of automobile workers. However, further work is needed to determine various health-related issues associated with heavy metal exposure among automobile workers.

Comparative determination of human health risks associated with consumption of groundwater contaminated with lead in selected areas surrounding the former lead mine in Kabwe and non-mining areas in Lusaka, Zambia

Background: This study focused on addressing health risks attributed to lead (Pb) contamination in groundwater, prompted by its known connection to negative health outcomes. It investigated the extent of Pb exposure through groundwater consumption near areas surrounding the former lead mine in Kabwe and non-mining areas in Lusaka, Zambia. The study compared the health risks of consuming Pb-contaminated groundwater in Kabwe's mining vicinity and Lusaka's non-mining areas. Methods: A comparative cross-sectional study collected 61 borehole samples from both areas and analyzed Pb levels using atomic absorption spectrometry. Health risks were evaluated via estimated daily intakes (EDI), target hazard quotient (THQ), and target cancer risk (TCR) assessments. Statistical analysis employed the Mann-Whitney U test due to non-normal data distribution. Results: Pb concentrations were significantly higher (p&lt;0.05) in mining areas (median=0.131 mg/l) than in non-mining areas (median=0.071 mg/l). Alarmingly, 91% of mining and 74% of non-mining samples exceeded world health organization limits. Particularly, EDIs for adults and children from mining areas exceeded recommended intakes. However, THQs were &lt;1, indicating no immediate adverse health effects. Equally important, TCRs fell within USEPA's acceptable range, suggesting negligible cancer risk associated with Pb exposure. Conclusions: The elevated EDIs in both mining and certain non-mining areas suggest potentially toxic health effects. Notably, the THQ values below 1 imply no immediate health risks. TCRs within acceptable limits underscore a minimal cancer risk. As a result, addressing elevated Pb levels in groundwater is critical in both study areas to mitigate potential health effects associated with Pb exposure.

Sources and probabilistic ecological-health risks of heavy metals in road dust from urban areas in a typical industrial city

Urban road dust (URD) is a primary source of pollutants in urban environments. The contamination of heavy metals (HMs) in URD from urban area of Xingtai, a typical industrial city in China, was evaluated using enrichment factor, geoaccumulation index, and Nemerow integrated enrichment factor, along with Monte Carlo simulation (MCS). The HM sources in the URD were apportioned using positive matrix factorization (PMF). We employed a combination of PMF and MCS to estimate the probabilistic ecological-health risks of source-specific HMs in the URD and to identify priority sources and pollutants for HMs pollution control in the URD. Compared to the background values, the URD had elevated Pb, Co, Cr, Cu, Zn, and Ba concentrations. The overall pollution levels and ecological risks of the HMs were heavy and moderate, respectively, and were mainly caused by Co. The potential carcinogenic risks posed by HMs in URD to residents, and their non-carcinogenic risks to children, cannot be overlooked. The HMs in the URD originated mainly from industrial, mixed, and atmospheric deposition sources, accounting for 28.8, 30.8, and 40.4% of the total HMs, respectively. Mixed and industrial sources were priority sources, and Co and Cr were priority control HMs in the URD.

Geochemical features of sulfides of the Aktash magnetite-polymetallic deposit, Western Karamazar, Tajikistan (LA-ICP-MS data)

The distribution of trace elements in sulfdes from various ores of the Aktash magnetite-polymetallic deposit (Tajikistan) is studied using LA-ICP-MS method. Sulfdes partly replace banded magnetite ores. Each sulfde type exhibits specifc geochemical features. Galena from sulfde-magnetite ores contains the higher amount of elements of «high-temperature» association (Bi, Ag, Cu) than galena from pyroxene-sphalerite ores, which, in addition to Ag and Bi, also contains higher amount of elements of «medium-temperature» association (Se, Te, and Sb). Sphalerite from sulfde-magnetite and chlorite-pyrrhotite ores contains higher Fe, Cd and Mn amount than sphalerite from pyroxene-sphalerite ores, which is characterized by elevated Co and As contents. Pyrite is depleted in trace elements except for As, the content of which is maximum compared to other sulfdes. The Ag, Se, Bi, Zn, Cd and Ni contents of chalcopyrite from chlorite-pyrrhotite ores are higher than in chalcopyrite from sulfde-magnetite and pyroxene-sphalerite ores. Chalcopyrite from pyroxene-sphalerite ores is characterized by elevated Pb, As, Ge, Te and Sb contents. Relatively high Co, Ni and Se contents are determined in pyrrhotite. In addition to Fe, Cu, Zn, Pb and Au, which form minerals in all types of ores, we suggest by-product extraction of following elements from complex sulfde-magnetite, chlorite-pyrrhotite and pyroxene-sphalerite ores (the Bi, Ag, Se and Te contents of galena and Cd content of sphalerite are shown in brackets): Bi (19520–24650 ppm), Ag (7907–9650 ppm), Se (397–606 ppm) and Te (276– 436 ppm) from galena concentrate and Cd (8525–27670 ppm) from sphalerite concentrate.