Concentrations Of Elements Research Articles

Copper, lead, and zinc tolerance and accumulation in the Australian rattle pods Crotalaria novae‐hollandiae, C. medicaginea, and C. mitchellii

AbstractCrotalaria is a genus of ~600 species of legumes predominantly found in (sub)tropical regions of Africa and Australia. Crotalaria novae‐hollandiae from Australia is a polymetallic zinc (Zn)‐cadmium(Cd)‐copper(Cu) hyperaccumulator, but only when growing in metalliferous soils. This study aimed to test metal tolerance in Australian Crotalaria species to establish whether metal tolerance is a trait shared between Crotalaria species not known to occur on metalliferous soils. The hyperaccumulator Crotalaria novae‐hollandiae and two non‐metallophytes, Crotalaria mitchellii and Crotalaria medicaginea, were exposed to different treatments containing Cu‐lead(Pb)‐Zn in the form of spiked soils. Foliar samples were analyzed for total elemental concentrations and spectrophotometric analysis was undertaken to assess photosynthetic pigments (chlorophyll a + b and carotenoids) as indicators of stress and polyphenols as an indicator of tolerance. No significant differences in metal accumulation were found in the Crotalaria species, and all exhibited a high level of tolerance toward Zn. However, C. novae‐hollandiae exhibited the greatest tolerance toward Zn but had low tolerance toward Cu, while none accumulated foliar Pb. Tolerance to Zn appears to be a trait shared between the Crotalaria species tested. None of the tested Crotalaria species exhibited tolerance toward Cu, and none accumulated Pb.

Accurate determination of matrix composition in Cd x Zn 1 − x O semiconductor material using MS-SIMS and ToF-SIMS methods

Abstract This study focuses on the method for determining the exact composition for Cd x Zn 1 − x O semiconducting material using secondary ion mass spectrometry. The calibration curve method is employed to establish a quantitative relationship between the intensity of secondary ions and the concentrations of elements in Cd x Zn 1 − x O thin films. Additionally, the study compares the relative sensitivity factors with the calibration curve method for determining the value of x in Cd x Zn 1 − x O . A comparison between the performances of Time of Flight and Magnetic Sector SIMS in analyzing Cd x Zn 1 − x O thin films is also presented. This approach aims to enhance the accuracy and reliability of quantitative analysis in SIMS for Cd x Zn 1 − x O thin films.

Evaluation of the Potential of High-Performance Liquid Chromatography–Inductively Coupled Plasma–Mass Spectrometry for the Determination of Chemical Warfare Agents and Their Toxic Degradation Products

The determination of chemical warfare agents (CWAs) and their toxic degradation products (DPs) has become increasingly important for public and military safety in recent years. We focused on assessing the possibility of the HPLC-ICP-MS analytical technique to verify the provisions of the Chemical Weapons Convention. This technique enables the identification and determination of minimal concentrations (ppt range) of elements in various matrices. This fact is important for the determination of CWAs and other highly harmful compounds, even small amounts of which can have serious consequences for living organisms. We have critically analysed the results of scientific research on the identification and quantitative determination of extremely toxic organophosphorus, organosulfur and organoarsenic CWAs, their derivatives and their degradation products using high-performance liquid chromatography (HPLC) coupled with inductively coupled plasma–mass spectrometry (ICP-MS).

Comparative Study of Cytotoxicity and Accumulation of Boron and Lithium-Containing Drugs in Skin Melanoma Cells In Vitro.

We studied cytotoxicity and accumulation of boron and lithium by cultured human fibroblasts and human and mouse skin melanoma cell cultures. The cytotoxicity of boron and lithium drugs was assessed by MTT tests in the boron and lithium concentration range of 10-640 μg/ml. Cell viability was significantly reduced after incubation with boron and lithium at concentrations >160 μg/ml. To assess accumulation of boron and lithium, the concentration of elements was measured using inductively coupled plasma atomic emission spectrometry. Melanoma cells more intensively accumulated lithium in comparison with boron. The results indicate the possibility of safe application of lithium salts in concentrations minimally required for successful neutron capture therapy.

Impact of microbial activity on fluoride release from sediments in areas with high fluoride groundwater: Mechanisms, sources and the lithology diversity

This study explores the interplay between microbial activity and sediment lithology in influencing fluoride release from sediments. Sediment samples, collected from Yuncheng Basin: a region known for significant groundwater fluoride contamination, exhibit fluoride concentrations well above the global average, ranging from 206.2 mg/kg to 780.9 mg/kg. These samples comprising silt, silt loam, and sandy loam, are enriched with minerals such as quartz, calcite, albite, chlorite, and illite.Microbial batch incubation reveals that microbial activity significantly enhances fluoride release, particularly in silt loam sediments. The results from sequential extraction first timely identified that the carbonate-bound and Fe-Al-bound fluoride fractions are the most affected forms of fluoride by microbial activity, highlighting the roles of mineral dissolution and desorption in fluoride mobilization.Further batch incubation experiments demonstrate significant increases in fluoride concentrations, especially in silt loam sediments, indicating the role of microbial processes in accelerating fluoride release. Additionally, the study unveils diverse patterns of dissolved elemental concentrations during incubation, with varying release patterns for calcium, magnesium, iron, aluminum, and manganese. These findings illustrate the complex biogeochemical interactions that govern fluoride mobilization in these sediments.Sequential extraction studies further elucidate the intricate mechanisms of fluoride release, with microbial activity primarily influencing the release of carbonate-bound and Fe-Al-bound fluoride. This study also sheds light on the co-dissolution of fluoride and calcium, offering valuable insights into geochemical processes driven by microbial interactions within the sediment matrix.

Ecological and Human Health Risk Assessment Based on Stream Sediments from Coastal Oecusse (Timor)

Timor Island is located in a geologically complex region strongly affected by the collision of the Australian margin with the Banda volcanic arc. In Oecusse, an enclave of East Timor in the western part of Timor, crop out several lithological units of the Banda Terrane that are associated with the obduction of oceanic crust and upper mantle on the Australian continental crust. This study reports the geochemistry of stream sediments from the coastal region of the Oecusse enclave, where the Banda Terrane is best represented, employing statistical analyses to discern the sources of metal(oid)s and assessing ecological and health risks. Arsenic, Cr, and Ni are the elements with higher potential ecological risk factors. The potential ecological risk index (PERI), which combines single indexes of ecological risk factors for multiple elements, is very high in a stream sourced by the Lolotoi-Mutis Complex. Significant risks for human health were found for As (sourced by the Lolotoi-Multis Metamorphic Complex and basalts of the Barique Formation), Mn (sourced by the Maubisse and Barique formations), and V (sourced by the Manamas Formation). The highest values of hazard index (HI), however, were determined with Cr, in particular for children (HI higher than 10 in 12 sediments sourced by ultramafic units and their covering sedimentary units). This investigation shows that high geogenic concentrations of several elements, particularly those derived from the oceanic crust and the upper mantle, raise significant cancer and non-carcinogenic risks.

Accretion and Core Formation of Earth-like Planets: Insights from Metal–Silicate Partitioning of Siderophile and Volatile Elements

The origin of volatile elements, the timing of their accretion and their distribution during Earth’s differentiation are fundamental aspects of Earth’s early evolution. Here, we present the result of a newly developed accretion and core formation model, which features the results of high P–T metal–silicate partitioning experiments. The model includes well-studied reference elements (Fe, Ni, Ca, Al, Mg, Si) as well as trace elements (V, Ga, Ag, Au, S) covering a wide range from refractory to volatile behavior. The accretion model simulates the different steps of planet formation, such as the effects of continuous, heterogenous core formation at high P–T, the effect of the Moon-forming giant impact and the addition of matter after the core formation was completed, the so-called “late veneer”. To explore the “core formation signature” of the volatile depletion patterns and the quantitative influence of a late veneer, we modeled planets that would have formed from known materials, such as CI, CM, CV, CO, EH and EL meteorites, and from a hypothetical volatile depleted material, CI*. Some of the resulting planets are Earth-like in key properties, such as overall core size, major element composition, oxygen fugacity and trace element composition. The model predicts the chemical signatures of the main planetary reservoirs, the metallic core and bulk silicate planet (BSP) of the modeled planets, which we compare with the chemical signature of Earth derived previously from core formation models and mass balance-based approaches. We show that planets accreted from volatile depleted carbonaceous chondrites (CM, CV, CO and CI*) are closest in terms of major element (Si, Mg, Fe, Ca, Al, Ni) and also siderophile volatile element (Ge, Ga, Au) concentrations to the components from which Earth accreted. Chalcophile volatile elements (S, Ag), instead, require an additional process to lower their concentrations in the BSP to Earth-like concentrations, perhaps the late segregation of a sulfide melt.

Contamination source, health and ecological risk assessment of hazardous elements in the sediment of the Shahid Rajaee reservoir

Sediment pollution from potentially hazardous elements (PHE) generated by human activity has grown into a worldwide problem. In this regard, for the first time, surface sediment samples were obtained from six points along the Shahid Rajaee Reservoir for this investigation. Elements concentrations (Cu, Cr, Co, Mn, Fe, Pb, Ni, and Zn) were assessed using ICP-MS. Based on the individual indices (geoaccumulation index, contamination factor), all elements at all sample sites were found to be low in contamination, except Pb and Zn (at sites 1 and 2). The combined effect of PHEs in the sediment samples did not show a considerable concern, according to the synergistic indices. The health risk assessment revealed that recreational receptors were unlikely to face non-carcinogenic or carcinogenic hazards as a consequence of exposure to PHEs in sediments with unintentional ingesting and contact with the skin. The Tessier technique demonstrated that all PHEs were mostly connected with the oxidizable fraction. According to statistical study, while Cu, Co, Cr, Ni, Fe, and Mn were obtained from lithogenic sources, Pb and Zn came from natural as well as human-made sources.

Evolution of Semiconvective Staircases in Rotating Flows: Consequences for Fuzzy Cores in Giant Planets

Recent observational constraints on the internal structure of Jupiter and Saturn suggest that these planets have “fuzzy” cores, i.e., gradients of the concentration of heavy elements that might span a large fraction of the planet’s radius. These cores could be composed of a semiconvective staircase, i.e., multiple convective layers separated by diffusive interfaces arising from double-diffusive instabilities. However, to date, no study has demonstrated how such staircases can avoid layer mergers and persist over evolutionary timescales. In fact, previous work has found that these mergers occur rapidly, leading to only a single convective layer. Using 3D simulations, we demonstrate that rotation prolongs the lifetime of a convective staircase by increasing the timescale for both layer merger and erosion of the interface between the final two layers. We present an analytic model for the erosion phase, predicting that rotation increases the erosion time by a factor of approximately Ro−1/2, where Ro is the Rossby number of the convective flows (the ratio of the rotation period to the convective turnover time). For Jovian conditions at early times after formation (when convection is vigorous enough to mix a large fraction of the planet), we find the erosion time to be roughly 109 yr in the nonrotating case and 1011 yr in the rotating case. If these timescales are confirmed with a larger suite of numerical simulations, the existence of convective staircases within the deep interiors of giant planets is a strong possibility, and rotation could be an important factor in the preservation of their fuzzy cores.

Qualidade da água envasada consumida no estado de São Paulo: análise de substâncias inorgânicas

Introduction: The availability of different brands of bottled water on the national market, combined with the growing consumption by the population, makes it important to assess the quality of its chemical composition. Objective: To quantify inorganic chemical substances (nutrients and toxic metals) in samples of bottled water from national and imported sources consumed in the State of São Paulo, in compliance with legislation and compendiums; verify the parameters of inorganic elements indicated on labeling, as well as the recommended daily intake. Method: Determinations were carried out by inductively coupled plasma mass spectrometry. Results: The evaluation indicated that 93.5% of the total of the 107 samples analyzed presented concentrations of inorganic chemical elements in accordance with the maximum values allowed in national legislation for all analytes (96.5% for national and 81.0% for imported), thus being considered suitable for human consumption. Discordant results were obtained for 6.5% for the elements chromium (2.3%) and selenium (1.2%) in national water and chromium (19.0%) in imported water. Levels above the recommended limits by the international compendia for sodium intake were quantified in an imported water sample that could cause illness in the body. Furthermore, the variability observed between the experimental results and values declared in the chemical composition tables (labeling) can lead consumers to purchase a product containing inadequate information, thereby harming their daily intake needs. Conclusions: The results highlight the importance of establishing and maintaining continuous monitoring programs in the country to monitor the sanitary quality of food consumed by the population and thus protect population’s health.

Bioaccumulation and Health Risk Assessment of Heavy Metals in Labeo rohita and Mystus seenghala from Jhelum River, Punjab, Pakistan

The bioaccumulation of trace elements and heavy metals in aquatic organisms is a critical environmental concern due to its potential impact on ecosystem health and human safety. This study investigated the level of trace elements and heavy metals bioaccumulation in Labeo rohita and Mystus seenghala from the River Jhelum in the district Khushab, Punjab, Pakistan. The concentration of calcium, magnesium, iron, nickel, copper, arsenic, cadmium, zinc, chromium, manganese, cobalt, and lead in the gills, liver, and muscle tissues of these fish was measured using inductively coupled plasma-mass spectrometry. Then, the extent of contamination and its possible health risks were assayed. Our findings indicate significant variations in the elemental and metal concentrations among different organs and between species, reflecting their diverse feeding habits and habitats. The health risk assessment based on the estimated daily intake, estimated weekly intake, maximum permissible intake, target hazard quotient, hazard index or total target hazard quotient, health risk index, and target cancer risk revealed potential risks to human consumers of these fish. This study emphasizes the need for continuous monitoring, as new data and insights are crucial for understanding and mitigating these risks. Strict regulatory measures are also necessary to safeguard public health and preserve the ecosystem of Jhelum River.

Impact of PM2.5 filter extraction solvent on oxidative potential and chemical analysis

ABSTRACT Fine particulate matter (PM2.5) is hypothesized to induce oxidative stress, and has been linked to acute and chronic adverse health effects. To better understand the risks and underlying mechanisms following exposure, PM2.5 is collected onto filters but prior to toxicological analysis, particles must be removed from filters. There is no standard method for filter extraction, which creates the possibility that the methods of extraction selected can alter the chemical composition and ultimately the biological implications. In this study, comparisons were made between extraction solvents (methanol (MeOH), dichloromethane (DCM), 0.9% saline, and Milli-Q water) and the results of oxidative potential and elemental concentration analysis of PM2.5 collected across sites in Arkansas, USA. Significant differences were observed between solvents, with DCM having significantly different results compared to all other extraction solvents (p ≤ 0.001). Significant correlations between element, black carbon, and PM2.5 concentrations and oxidative potential were observed. The observed correlations were extraction solvent dependent. For example, in saline extracted samples, oxidative potential had significant negative correlations with: Ba, Cd, Ce, Co, Ga, Mn and significant positive correlations with: Cr, Ni, Th, U. While in MeOH extracted samples, significant positive correlations were only between oxidative potential and Ga, U and significant negative correlations with V. This indicates that PM2.5 samples extracted with different solvents will yield different conclusions about the causal components. This study highlights the importance of filter extraction methods in interpretation of oxidative potential results and comparisons between studies. Implications While there is no standard method for PM2.5 filter extraction, variation of extraction methods impact analytical results. This project identifies that extraction method variation, particularly extraction solvent selection, leads to discrepancies in chemical and toxicological analysis for PM2.5 collected on the same filter. This work highlights the need for methods standardization to support accurate comparisons between PM2.5 research studies, thus providing better understanding of PM2.5 across the globe.

Ecohydrological role of groundwater outflows in the functioning of the ecotone zone in Lake Jaczno, Poland

The research determined the influence of natural groundwater outflows from the spring peat bog on the water supply and its quality in Lake Jaczno. Lake Jaczno is located in the Suwalski Landscape Park (SLP) in the Podlaskie Voivodeship, north-east Poland. The research was conducted from April 2009 to October 2010 and from September 2022 to September 2023. Water samples were collected from spring areas, shallow groundwater, and from Lake Jaczno. Fieldwork involved measuring flow, temperature, water electrolytic conductivity (EC), dissolved oxygen (DO) concentration, water oxygen saturation (WS), and water reaction (pH). Chemical analyses of water samples were carried out in the laboratory. Findings indicate that groundwater, spring water, and lake water in the SLP maintain high quality, with no significant changes in chemical composition over the past decades. Additionally, the physical water parameters display low temporal variability. The EC in the tested waters oscillates around 500 μS∙cm–1. Both spring and lake waters are well oxygenated (97–100%). Biogenic element concentrations exhibit higher variability, influenced by flora development in areas with natural groundwater outflows. High oxygenation of water contributes to increased concentrations of nitrates. The analysed waters exhibited similarity in the concentration and structure of phosphorus forms. Additionally, sediment chemical parameters at Lake Jaczno suggests a buffering capacity in the transitional zones between water and land. Despite similarities in chemical composition, sediment granulometry suggests low permeability, potentially restricting exchange between groundwater and surface waters. Monitoring springs in these environments is important due to their impact on quantity and quality of water in the analysed areas.

Effects of Salicornia-supplemented wheat straw on the biological yield, amino and fatty acids of elm oyster mushroom, (Hypsizygus ulmarius Elm A)

The study examined the impact of Salicornia supplementation on the biological efficiency and biochemical properties of white Elm oyster mushrooms, Hypsizygus ulmarius. Four substrates were used to cultivate the mushrooms. Wheat straw was used as the main substrate and the Salicornia was used to partially replace the main substrate at the ratios of 5, 10, and 20% while 100% wheat straw was used as the control. The study found that the 20% Salicornia completed the mycelial run earlier (41 days), while the control treatment took the longest (45 days). The 5% Salicornia supplemented treatment and control treatment had the highest and lowest biological efficiencies (126 and 65%) respectively. The elemental concentration was undetectable for Copper (Cu), Lead (Pb), and Cadmium (Cd). The mushrooms from the control had the highest while those from the 20% treatment had the lowest (Zinc (Zn) levels (0.0115 ug/100 g) and 0.0078 ug/100 g). Conversely, Chromium (Cr) levels were highest and lowest in the 20% (0.0022 ug/100 g) and control treatments (0.0007 ug/100 g). Similarly, the total unsaturated fatty acids were highest in the control treatment (78%) and lowest in the 20% treatment (69%) while the opposite was true for the saturated fatty acids (22% and 31%). The mushrooms investigated in this study had higher essential amino acids (44–49%) compared to non-essential amino acids (17–20%). The results from this study suggest that Salicornia is a promising marine resource with the potential to enhance the health-promoting properties of oyster mushrooms.

Co-occurrence and correlation of arsenic, cadmium, and lead in processed foods intended for infants and young children: evaluation of two statistical approaches adapted to censored data and their implications for risk management

We evaluated the co-occurrence of arsenic (As), cadmium (Cd), and lead (Pb) in 10 categories of processed foods intended for infants and young children (<2 years old) and adapted methodology to characterise and evaluate the impact of correlations on toxic element (TE) concentrations in these foods. Co-occurrence was assessed by calculating the frequency of samples having concentrations above the limit of detection (LOD) among TE sets (i.e. As-Cd, As-Pb, Cd-Pb, and As-Cd-Pb). Pairwise correlations were evaluated using two statistical approaches adapted to censored data: (i) non-parametric Kendall’s tau and (ii) parametric Bayesian modelling. Nonparametric and parametric correlation analyses showed similar results. We found positive correlations among one or more pairs of the TEs (As, Pb, and Cd) in 9 of the 10 categories of foods intended for infants and young children and a negative correlation for one TE pair for a single food category. Where positive correlations are observed, removing samples with high concentrations of a given TE reduces the mean of the other TEs in that food. We also explored the impact of correlations among TEs on the fraction of the supply below maximum levels. Positive correlations among TEs have the potential to reduce the impact on the supply when setting multiple maximum levels.

Human biomonitoring of essential and toxic trace elements (heavy metals and metalloids) in urine of children, teenagers, and young adults from a Central European Cohort in the Czech Republic.

Exposure to toxic trace elements, which include metals and metalloids, can induce adverse health effects, including life-threatening diseases. Conversely, essential trace elements are vital for bodily functions, yet their excessive (or inadequate) intake may pose health risks. Therefore, identifying levels and determinants of exposure to trace elements is crucial for safeguarding human health. The present study analyzed urinary concentrations of 14 trace elements (arsenic, cadmium, cobalt, chromium, copper, mercury, manganese, molybdenum, nickel, lead, antimony, selenium, thallium, and zinc) and their exposure determinants in 711 individuals, spanningfrom children to young adults from a Central European population from the Czech Republic. Multivariate linear regression and non-parametric Kruskal-Wallis ANOVA were used to investigate exposure determinants. Estimates of 95th percentile concentrations and confidence intervals were carried out to establish reference values(RV95). The study also assessed the percentage of population exceeding health-based guidance values (GVs) to gauge health risks. Young adults showed elevated toxic element concentrations, whereas children exhibited higher concentrations of essential elements. Mercury concentrations were associated with both dental amalgam filling count and seafood intake; arsenic concentrations were associated with seafood, rice, and mushroom consumption. Mushroom consumption also influenced lead concentrations. Sex differences were found for cadmium, zinc, nickel, and cobalt. Between 17.9% and 25% of the participants exceeded recommended GV for arsenic, while 2.4% to 2.8% exceeded GV for cadmium. Only one participant exceeded the GV for mercury, and none exceeded GVs for chromium and thallium. Essential trace elements' GVs were surpassed by 38% to 68.5% participants for zinc, 1.3% to 1.8% for molybdenum, and 0.2% to 0.3% for selenium. The present study examines trace element exposure in a Central European population from the Czech Republic, unveiling elevated exposure levels of toxic elements in young adults and essential elements in children. It elucidates key determinants of trace element exposure, including dietary and lifestyle indicators as well as dental amalgam fillings. Additionally, the study establishes novel reference values and acomparison with established health-based human biomonitoring guidance values, which are crucial for public health decision-making. This comprehensive biomonitoring study provides essential data to inform public health policies and interventions.

Genesis of Xinjiazui Gold Deposit: In Situ Geochemical Constraints from Arsenopyrite

The Xinjiazui gold deposit marks a notable significance in prospecting within the Back-Longmenshan tectonic belt, located on the northwest margin of the Yangtze Block, China. Despite the extensive studies conducted on this deposit, the source of the ore-forming materials remains unclear, leading to ongoing debates regarding the genesis of this deposit. This study analyzed in situ (EPMA and LA-ICP-MS) trace elements and S-Pb isotopes of arsenopyrite, solely from the principal metallogenic stage and paragenetic with native gold. The results show that the gold in arsenopyrite occurs as invisible gold (Au3+), with an average concentration of 9.38 ppm, whereas the concentrations of magma-related elements, such as W, Sn, Mo, and Bi, are very low. The sulfur isotopes (34S) of arsenopyrite range from 8.32‰ to 10.16‰, aligning closely with the deep metamorphic basement (Pt3l). Meanwhile, the lead isotopes in arsenopyrite display characteristics typical of those found in orogenic belts. A comprehensive analysis of the abundance of gold indicated that the metallogenic materials (sulfur and gold) primarily originated from Pt3l. Additionally, the arsenopyrite thermobarometer indicated that the Xinjiazui gold deposit formed in a medium–low-temperature, medium metallogenic environment (5.57–8.69 km), with a sulfur fugacity (log f (S2)) below −8.4. Combined with previous research results, this study proposes that the Xinjiazui gold deposit is a subduction-related mesozonal orogenic gold deposit. In gold prospecting and exploration in the Back-Longmenshan tectonic belt, it is essential to focus on the distribution of brittle-ductile shear zones and location of the quartz veins associated with pyrite and arsenopyrite mineralization.

Human Exposure through the Diet to Arsenic and Other Toxic Elements: A Literature Review of Scientific Studies Conducted in Catalonia, Spain, in the Current Century.

Human exposure to arsenic and other toxic elements such as cadmium, lead and mercury may lead to a wide range of adverse health effects. In relation to this, it is well established that the diet is the main route of exposure to both essential and toxic trace elements. In recent years, the levels of toxic elements in foodstuffs have been measured in numerous studies conducted all over the world. Scientific databases show that, in the current century, China and Spain have been the countries where the most surveys on this topic have been carried out. Regarding Spain, Catalonia is the region where most studies aimed at determining the concentrations of trace elements in food have been performed. The objective of this paper was to review the studies carried out in Catalonia on the concentrations of As and toxic metals (including Cd, Hg and Pb) in food, as well as their estimated dietary intakes (EDIs). The results of total diet studies (TDSs) and duplicate diet (DD) studies have been included. For most toxic elements, a continued reduction in the EDI has been observed. This reduction is associated with a decrease in their concentrations in food, and with certain changes in dietary habits. Fish and seafood is the food group showing the highest content of toxic elements. However, none of the adult groups exceeded-in general-the safety thresholds for As, Cd, Hg and Pb established by the European Food Safety Agency (EFSA).

Using Microplates to Test Boron in Zea mays Leaf Plant and the Surrounding Soil

Background: Boron plays a crucial role in cell wall construction in plants and also facilitates the transfer of carbohydrates, which are essential for various physiological processes. The objective was to measure element concentrations in soil, water extracts and plant tissues (Zea mays) using Azomethine-H and ICP-MS within a controlled microplate assay. Methods: A microscopic plate repeat test was used to analyze the concentration of boron in soil extracts and plant tissue ash from local Zea mays leaves, considering the global trend in environmental sustainability. Tests aimed to modify the azomethine-H microscopic approach to eliminate pH and chemical interferences in soil samples and plant tissues. Due to their ability to ensure sample repeatability and quality control, micro spectrophotometers are ideal for high-throughput analysis. Result: The microplate test has enhanced boron measurement in soil and plant tissue samples. Our improvements to the microplate B assay have resulted in more accurate boron measurements in these samples. Microplate B testing is effective and suitable analysis in modern research and laboratories, using 40 times less chemical reagent per sample than traditional spectrophotometry. Additionally, microplates enable simultaneous analysis and calibration of samples. The modified plate test significantly improves boron measurement in soil and plant tissue samples, using 40 times fewer reagents than traditional spectrophotometry. This method is cost-effective, ideal research, commercial analysis and making it a valuable tool for modern laboratories.

Magma Degassing andGoldMineralizationinthe Alkaline Intrusion- HostedGiltEdgeGoldDeposit,NorthernBlackHills, SouthDakota,USA

Gold mineralization in the Gilt Edge deposit was closely associated with magmatic differentiation and the formation of a Tertiary alkaline intrusive complex within the Lead–Deadwood dome.. Fluid inclusions and trace element geochemistry were used to study fluid evolution and determine sources. Quartz disseminated in unaltered trachyte porphyry hosts two populations of primary inclusions: 1) hypersaline i S–L–V a red hematite crystal and 2) mixtures of L–V and V– L that record phase separation at ~700oC. Whereas samples of hydrothermal quartz collected from in ore zones within and beyond structures (e.g., fault and breccia zones) contain dominant populations of V–L and L–V inclusions, respectively. Mineralization in structures formed from complex fluids of magmatic origin based on inclusions containing five transparent salt crystals and opaque crystals with cubic and round habits that have homogenization temperatures (Th) 650oC and salinities 63 wt.% NaCl equiv. In contrast, broader areas of disseminated mineralization in argillized and propylitized rocks contain hydrothermal quartz hosting large populations of L–V inclusions with Th of 200o360oC and salinities of 10–30 wt.% NaCl equiv., which reflect fluid mixing. Trace element concentrations are significantly higher in samples from structures and define zones of near surface Ag–As–Zn–Pb and deep Au–W–Mo–Cu. Whereas low trace element concentrations characterize propylitized quartz trachyte porphyry, except for high concentrations of Sb and Hg that occur at depth and likely track the retreat of isotherms as the hydrothermal system collapsed. These data show that during differentiation in a deep magma chamber, volatile-rich low-density fluids were periodically degassed into preexisting structures that were reactivated. Gold deposition during four stages of mineralization likely occurred due to boiling, changes in oxygen fugacity, and fluid mixing.