Electrospun Polycaprolactone Research Articles

Wnt 3a-Modified Scaffolds Improve Nerve Regeneration by Boosting Schwann Cell Function.

A pivotal approach in engineering artificial peripheral nerve sheaths encompasses the augmentation of the regenerative microenvironment via the manipulation of Schwann cells (SCs). Our investigation employed single-cell sequencing analysis to elucidate the potential functions of Schwann cells and the Wnt pathway in facilitating peripheral nerve regeneration. In vitro studies showed that activating the Wnt signaling pathway promotes the transition to repair SCs, boosting their growth, movement, and immune functions. To better understand the peripheral nerve regeneration environment, we created a polymer scaffold using ammonization and electrospinning. The Wnt3a protein was incorporated into the polycaprolactone (PCL) electrospun fiber surface. In a rat sciatic nerve defect model, the Wnt3a-modified scaffold showed better nerve repair outcomes than traditional electrospun scaffolds. After a week, the test group showed better immune regulation and angiogenesis, with a significant increase in axon growth rate observed after 3 weeks. Three-month-long animal experiments revealed notable improvements in neuroelectrophysiology, reduced organ atrophy, and enhanced sciatic nerve recovery. In this nerve defect model, Wnt3a-modified neural scaffolds achieved repair effects.

Polydopamine‐Mediated Gold Nanostructure‐Decorated Electrospun Polycaprolactone Fibers for Photocatalytic Dye Degradation

AbstractMetallic nanoparticle (NP)‐decorated electrospun micro/nanofibers as an ideal photocatalytic system for the degradation of organic dyes may provide unique advantages in terms of 3D morphology with high surface area, well‐controlled porosity, low cost, good interconnectivity, and excellent flexibility. However, novel, flexible, low‐cost, and efficient fabrication methods are still demanded to obtain photocatalytic activity. In this report, for the first time, we propose gold NP (AuNP)‐decorated electrospun poly(Ɛ‐caprolactone) (PCL) membrane fibers through a conformal thin layer of polydopamine (PDA). Herein, PDA could reduce the Au3+ ions and enable the adsorption of AuNPs without using any reducing agent or seed material. The proposed system could degrade methylene blue after a 6‐h of daylight exposure with a rate constant of 4.83 × 10−3 and 4.64 × 10−3 min−1 for citrate‐stabilized AuNPs and reduction of Au ions cases, respectively. Even after fifth cycle of usage, AuNP‐decorated electrospun fibers showed reasonable catalytic activity without any significant change in their morphology and chemical content. For the case of rhodamine 6G, the same systems provided 55.2% and 64.1% of dye degradation within a 5‐h exposure. The proposed system presents unique advantages regarding control, flexibility, low cost, and efficiency in various catalytic applications.

Diseased Tendon Models Demonstrate Influence of Extracellular Matrix Alterations on Extracellular Vesicle Profile.

Tendons enable movement through their highly aligned extracellular matrix (ECM), predominantly composed of collagen I. Tendinopathies disrupt the structural integrity of tendons by causing fragmentation of collagen fibers, disorganization of fiber bundles, and an increase in glycosaminoglycans and microvasculature, thereby driving the apparent biomechanical and regenerative capacity in patients. Moreover, the complex cellular communication within the tendon microenvironment ultimately dictates the fate between healthy and diseased tendon, wherein extracellular vesicles (EVs) may facilitate the tendon's fate by transporting biomolecules within the tissue. In this study, we aimed to elucidate how the EV functionality is altered in the context of tendon microenvironments by using polycaprolactone (PCL) electrospun scaffolds mimicking healthy and pathological tendon matrices. Scaffolds were characterized for fiber alignment, mechanical properties, and cellular activity. EVs were isolated and analyzed for concentration, heterogeneity, and protein content. Our results show that our mimicked healthy tendon led to an increase in EV secretion and baseline metabolic activity over the mimicked diseased tendon, where reduced EV secretion and a significant increase in metabolic activity over 5 days were observed. These findings suggest that scaffold mechanics may influence EV functionality, offering insights into tendon homeostasis. Future research should further investigate how EV cargo affects the tendon's microenvironment.

Comparative Corrosion Inhibition Test Study in Phosphate Buffer Saline for 316L Stainless Steel with Electrospun PCL Coating with Different Additives

In this study, ten different contents of PCL-based nanofibers containing ZnO, CuO, NiO, 2F TSC, 4F TSC and graphite additives (PCL+Graphite+CuO+NiO+ZnO, PCL+ZnO+Graphite, PCL+ZnO+NiO+CuO, PCL+ZnO, PCL+Graphite, PCL+ZnO+2F TSC, PCL+ZnO+NiO+CuO+4F TSC, PCL+ZnO+NiO+CuO+2F TSC, bare PCL, PCL+ZnO+4F TSC) 316L stainless steel (SS) surface was coated. After coating with these different types of nanofibers, measurements were taken with electrochemical techniques such as potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) in phosphate buffer solution (PBS) for 1 hour to investigate the corrosion inhibition properties. According to the results, the PCL+Graphite+CuO+NiO+ZnO coating provided the highest corrosion inhibition with a protection efficiency value of 98.83%. The PCL+4F+ZnO coating had the lowest inhibition property with a protection efficiency value of 40.72%. At the end of the tests, Nyquist, Bode, Tafel, OCP diagrams of the coatings were obtained and equivalent circuit models were presented.

Combining human liver ECM with topographically featured electrospun scaffolds for engineering hepatic microenvironment

Liver disease cases are rapidly expanding worldwide, and transplantation remains the only effective cure for end-stage disease. There is an increasing demand for developing potential drug treatments, and regenerative therapies using in-vitro culture platforms. Human decellularized extracellular matrix (dECM) is an appealing alternative to conventional animal tissues as it contains human-specific proteins and can serve as scaffolding materials. Herein we exploit this with human donor tissue from discarded liver which was not suitable for transplant using a synergistic approach to combining biological and topographical cues in electrospun materials as an in-vitro culture platform. To realise this, we developed a methodology for incorporating human liver dECM into electrospun polycaprolactone (PCL) fibres with surface nanotopographies (230–580 nm). The hybrid scaffolds were fabricated using varying concentrations of dECM; their morphology, mechanical properties, hydrophilicity and stability were analysed. The scaffolds were validated using HepG2 and primary mouse hepatocytes, with subsequent results indicating that the modified scaffolds-maintained cell growth and influenced cell attachment, proliferation and hepatic-related gene expression. This work demonstrates a novel approach to harvesting the potential from decellularized human tissues in the form of innovative in-vitro culture platforms for liver.

In Vitro Evaluation of Electrospun PCL Bioscaffold with Zinc-Doped Bioactive Glass Powder Addition.

Preparing electrospun fibers by applying a potential difference between a polymeric solution and a contacting substrate is increasingly attracting attention in tissue engineering applications. Among the numerous polymers, polycaprolactone (PCL) bioscaffold has been widely investigated due to its biocompatibility and biodegradability. Bioactive powder can be added to further improve its performance. In the present study, bioactive glass powder modified by adding 0-6 wt.% antibacterial zinc element (coded as ZBG) was prepared through the sol-gel process. Furthermore, PCL bioscaffolds with various ZBG additions were prepared using the electrospinning technique. The zinc-doped bioactive glass powder and electrospun PCL/ZBG bioscaffolds were evaluated using scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy to determine their structural properties. Additionally, in vitro bioactivity, biocompatibility and antibacterial performance were investigated. Experimental results showed that sol-gelled ZBG powder possessed superior bioactivity and 0.8 g ZBG was the optimal addition to prepare PCL/ZBG bioscaffolds with. All the electrospun PCL/ZBG bioscaffolds were biocompatible and their antibacterial performance against two S. aureus strains (SA133 and Newman) improved with increasing zinc concentration. Electrospun PCL/ZBG bioscaffolds exhibited excellent bioactivity and have great potential for biomedical application.

Hierarchically vascularized and suturable tissue constructs created through angiogenesis from tissue-engineered vascular grafts

A major roadblock in implementing engineered tissues clinically lies in their limited vascularization. After implantation, such tissues do not integrate with the hostʼs circulation as quickly as needed, commonly resulting in loss of viability and functionality. This study presents a solution to the vascularization problem that could enable the survival and function of large, transplantable, and vascularized engineered tissues. The technique allows vascularization of a cell laden hydrogel through angiogenesis from a suturable tissue-engineered vascular graft (TEVG) constructed from electrospun polycaprolactone with macropores. The graft is surrounded by a layer of cell-laden gelatin-methacryloyl hydrogel. The constructs are suturable and possess mechanical properties like native vessels. Angiogenesis occurs through the pores in the graft, resulting in a hydrogel containing an extensive vascular network that is connected to an implantable TEVG. The size of the engineered tissue and the degree of vascularization can be increased by adding multiple TEVGs into a single construct. The engineered tissue has the potential to be immediately perfused by the patient's blood upon surgical anastomosis to host vessels, enabling survival of implanted cells. These findings provide a meaningful step to address the longstanding problem of fabricating suturable pre-vascularized tissues which could survive upon implantation in vivo. Statement of significanceCreating vascularized engineered tissues that can be transplanted and rapidly perfused by the host blood supply is a major challenge which has limited the clinical impact of tissue engineering. In this study we demonstrate a technique to fabricate vascularized tissue constructs via angiogenesis from a suturable tissue-engineered vascular graft. The macroporous graft is surrounded with hydrogel, allowing endothelial cells to migrate from the lumen and vascularize the hydrogel layer with capillary-like structures connected to the macrovessel. The graft has comparable mechanical properties to native blood vessels and larger constructs can be fabricated by incorporating multiple grafts. These constructs could potentially be connected surgically to the circulation at an implantation site to support their immediate perfusion and survival.

Nanocarrier-Assisted Delivery of Berberine Promotes Diabetic Alveolar Bone Regeneration by Scavenging ROS and Improving Mitochondrial Dysfunction.

Oxidative stress and mitochondrial dysfunction are potential contributors to the compromised tissue regeneration capacity of alveolar bone in diabetic patients. Berberine, an active plant alkaloid, exhibits multiple pharmacological effects including antioxidation, blood glucose- and blood lipid-lowering properties. However, it remains uncertain whether berberine can improve impaired osteogenesis in type 2 diabetes mellitus (T2DM), and its poor solubility and oral bioavailability also constrain its applications in bone regeneration. Thus, our study aimed to probe the effects of berberine on bone marrow stem cells (BMSCs) in a diabetic microenvironment, with a greater emphasis on developing a suitable nano-delivery system for berberine and assessing its capability to repair diabetic alveolar bone defects. Firstly, BMSCs were exposed to berberine within a high glucose and palmitate (HG+PA) environment. Reactive oxygen species levels, mitochondrial membrane potential, ATP generation, cell apoptosis, and osteogenic potential were subsequently assessed. Next, we explored the regulatory mechanism of autophagy flux in the positive effects of berberine. Furthermore, a nanocarrier based on emulsion electrospinning for sustained local delivery of berberine (Ber@SF/PCL) was established. We assessed its capacity to enhance bone healing in the alveolar bone defect of T2DM rats through micro-computed tomography and histology analysis. Berberine treatment could inhibit reactive oxygen species overproduction, mitochondrial dysfunction, apoptosis, and improve osteogenesis differentiation by restoring autophagy flux under HG+PA conditions. Notably, Ber@SF/PCL electrospun nanofibrous membrane with excellent physicochemical properties and good biological safety had the potential to promote alveolar bone remodeling in T2DM rats. Our study shed new lights into the protective role of berberine on BMSCs under T2DM microenvironment. Furthermore, berberine-loaded composite electrospun membrane may serve as a promising approach for regenerating alveolar bone in diabetic patients.

Evaluating the efficacy of uniformly designed square mesh resin 3D printed scaffolds in directing the orientation of electrospun PCL nanofibers

Replicating the architecture of extracellular matrices (ECM) is crucial in tissue engineering to support tissues’ natural structure and functionality. The ECM’s structure plays a significant role in directing cell alignment. Electrospinning is an effective technique for fabricating nanofibrous substrates that mimic the architecture of extracellular matrices (ECM). This study aims to evaluate the efficacy of resin 3D-printed scaffolds made from a low-conductivity material (i.e., a resin composed of methacrylated oligomers, monomers, and photoinitiators) in directing the alignment of electrospun polycaprolactone (PCL) nanofibers. Six 3D-printed scaffolds were fabricated using stereolithography (SLA) technology and strategically positioned on an aluminum foil collector plate during electrospinning. The structured geometry of the scaffolds, rather than the local electric field distribution, is hypothesized to guide nanofiber alignment. Images acquired through the scanning electron microscopy (SEM) were used to analyze and statistically quantify the nanofibrous scaffolds to evaluate the alignment of nanofibers over the scaffolds compared to a set of randomly deposited control nanofiber samples in the absence of the 3D printed scaffolds. SEM images also showed significant alignment of nanofibers within the pores of scaffolds, using histograms as a means for indicating the distribution of orientation angles. Statistical analysis revealed that this distribution deviates from normality due to the deviations in the tails and the existence of relatively smaller peaks at angles relative to 0°, particularly within a range of ± 50° and ± 40°. It is further found that the average peak orientation angle relative to 0° had a maximum probability of 0.014. Furthermore, the statistical analysis confirmed the distribution and significant differences in orientation between test samples with 3D-printed scaffolds and control samples. These findings demonstrate the effectiveness of resin 3D-printed scaffolds, particularly their geometric filtering effect, leading to controlled nanofiber alignment, which is proposed to be beneficial for enhancing cell adhesion, proliferation, and cell migration in tissue engineering applications.

Electrospun PCL Nerve Wrap Coated with Graphene Oxide Supports Axonal Growth in a Rat Sciatic Nerve Injury Model.

Background/Objectives: Peripheral nerve injuries (PNIs) are a debilitating problem, resulting in diminished quality of life due to the continued presence of both chronic and acute pain. The current standard of practice for the repair of PNIs larger than 10 mm is the use of autologous nerve grafts. Autologous nerve grafts have limitations that often result in outcomes that are not sufficient to remove motor and sensory impairments. Bio-mimetic nanocomposite scaffolds combined with mesenchymal stem cells (MSCs) represent a promising approach for PNIs. In this study, we investigated the potential of an electrospun wrap of polycaprolactone (PCL) + graphene oxide (GO), with and without xenogeneic human adipose tissue-derived MSCs (hADMSCs) to use as a platform for neural tissue engineering. Methods: We evaluated, in vitro and in vivo, the potential of the nerve wrap in providing support for axonal growth. To establish the rat sciatic nerve defect model, a 10 mm long limiting defect was created in the rat sciatic nerve of 18 Lewis rats. Rats treated with the nanocomposites were compared with autograft-treated defects. Gait, histological, and muscle analyses were performed after sacrifice at 12 weeks post-surgery. Results: Our findings demonstrate that hADMSCs had the potential to transdifferentiate into neural lineage and that the nanocomposite successfully delivered hADMSCs to the injury site. Histologically, we show that the PCL + GO nanocomposite with hADMSCs is comparable to the autologous nerve graft, to support and guide axonal growth. Conclusions: The novel PCL + GO nerve wrap and hADMSCs used in this study provide a foundation on which to build upon and generate future strategies for PNI repair.

Functional poly(e-caprolactone)/SerMA hybrid dressings with dimethyloxalylglycine-releasing property improve cutaneous wound healing

Medical dressings with multifunctional properties, including potent regeneration capability and good biocompatibility, are increasingly needed in clinical practice. In this study, we reported a novel hybrid wound dressing (PCL/SerMA/DMOG) that combines electrospun PCL membranes with DMOG-loaded methacrylated sericin (SerMA) hydrogel. In such a design, DMOG molecules are released from the hybrid dressing in a sustained mannerin vitro. A series ofin vitroassays demonstrated that DMOG-loaded hybrid dressing has multiple biological functions, including promotion of human umbilical vein endothelial cells proliferation and migration,in vitrovascularization, and the generation of intracellular NO. When applied to the cutaneous wound, the PCL/SerMA/DMOG dressing significantly accelerated wound closure and tissue regeneration by promoting angiogenesis in the wound area, collagen deposition, and cell proliferation within the wound bed. These results highlight the potential clinical application of PCL/SerMA/DMOG hybrid dressings as promising alternatives for accelerating wound healing via improved biocompatibility and angiogenesis amelioration.

Core-shell electrospun polycaprolactone nanofibers, loaded with rifampicin and coated with silver nanoparticles, for tissue engineering applications

In the field of tissue engineering, the use of core-shell fibers represents an advantageous approach to protect and finely tune the release of bioactive compounds with the aim to regulate their efficacy. In this work, core-shell electrospun polycaprolactone nanofiber-based membranes, loaded with rifampicin and coated with silver nanoparticles, were developed and characterized. The membranes are composed by randomly oriented nanofibers with a homogeneous diameter, as demonstrated by scanning electron microscopy (SEM). An air-plasma treatment was applied to increase the hydrophilicity of the membranes as confirmed by contact angle measurements. The rifampicin release from untreated and air-plasma treated membranes, evaluated by UV spectrophotometry, displayed a similar and constant over-time release profile, demonstrating that the air-plasma treatment does not degrade the rifampicin, loaded in the core region of the nanofibers. The presence and the distribution of silver nanoparticles on the nanofiber surface were investigated by SEM and Energy Dispersive Spectroscopy. Moreover, SEM imaging demonstrated that the produced membranes possess a good stability over time, in terms of structure maintenance. The developed membranes showed a good biocompatibility towards murine fibroblasts, human osteosarcoma cells and urotheliocytes, reveling the absence of cytotoxic effects. Moreover, doble-functionalized membranes inhibit the growth of E. coli and S. aureus. Thanks to the possibilities offered by the coaxial electrospinning, the membranes here proposed are promising for several tissue engineering applications.

Unlocking the role of wound microbiome in diabetic, burn, and germ-free wound repair treated by natural and synthetic scaffolds

In current clinical practice, various dermal templates and skin substitutes are used to enhance wound healing. However, the role of wound commensal microbiome in regulating scaffold performance and the healing process remains unclear. In this study, we investigated the influence of both natural and synthetic scaffolds on the wound commensal microbiome and wound repair in three distinct models including diabetic wounds, burn injuries, and germ-free (GF) wounds. Remarkably, synthetic electrospun polycaprolactone (PCL) scaffolds were observed to positively promote microbiome diversity, leading to enhanced diabetic wound healing compared to the natural scaffolds Integra® (INT) and MatriDerm® (MAD). In contrast, both natural and synthetic scaffolds exhibited comparable effects on the diversity of the microbiome and the healing of burn injuries. In GF wounds with no detectable microorganisms, a reversed healing rate was noted showing natural scaffold (MAD) accelerated wound repair compared to the open or the synthetic scaffold (PCL) treatment. Furthermore, the response of the wound commensal microbiome to PCL scaffolds appears pivotal in promoting anti-inflammatory factors during diabetic wound healing. Our results emphasize that the wound commensal microbiome, mediated by different scaffolds plays an important role in the wound healing process.

Electrospun nanofibers incorporating lactobionic acid as novel active packaging materials: biological activities and toxicological evaluation

In this study, lactobionic acid (LBA) was incorporated into poly(vinyl alcohol) (PVA) and poly(ε-caprolactone) (PCL) by electrospinning. The antimicrobial effects of the nanofibers were tested using the agar diffusion method. Only the PVA formulations showed antimicrobial activity against Staphylococcus aureus. The PVA and PCL nanofibers containing LBA showed antioxidant activity ranging from 690.33 to 798.67 µM TEAC when tested by the ABTS method. The characterization of nanofibers was performed by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and mechanical analysis. The nanofibers showed a uniform morphology and their average diameters ranged from 295.5 to 2778.2 nm. The LBA addition induced a decrease in the enthalpy of fusion (ΔHm) of PVA and PCL nanofibers, while the Young’s modulus was reduced from 20 to 10 MPa in PCL and PCL-LBA nanofibers, respectively. No relevant differences were observed between the FTIR spectra of the control nanofibers and the nanofibers containing LBA. All nanofibers presented hemolysis rate below 2%, thus can be considered as non-hemolytic materials. Further toxicological assessment was performed with the selected formulation PVA10 + LBA. The evaluations by mutagenicity assay, cell survival measurement, cell viability analysis and agar diffusion cytotoxicity test indicated that there are no significant toxic effects. Electrospun nanofibers PVA-LBA and PCL-LBA were successfully produced, showing good thermal and mechanical properties and non-toxic effects. Furthermore, the nanofibers showed antimicrobial activity and antioxidant activity. The findings of this study indicate that PVA and PCL electrospun nanofibers incorporating LBA are promising for use in packaging applications.

Engineering an Extracellular Matrix Mimic Using Hemoglobin Protein Nanofibrils.

Extracellular matrix (ECM) is essential for tissue development, providing structural support and a microenvironment that is necessary for cells. As tissue engineering advances, there is a growing demand for ECM mimics. Polycaprolactone (PCL) is a commonly used synthetic polymer for ECM mimic materials. However, its biologically inactive surface limits its direct application in tissue engineering. Our study aimed to improve the biocompatibility of PCL by incorporating hemoglobin nanofibrils (HbFs) into PCL using an electrospinning technique. HbFs were formed from bovine hemoglobin (Hb) extracted from industrial byproducts and designed to offer PCL an improved cell adhesion property. The fabricated HbFs@PCL electrospun scaffold exhibits improved fibroblast adherence, proliferation, and deeper fibroblast infiltration into the scaffold compared with the pure PCL scaffold, indicating its potential to be an ECM mimic. This study represents the pioneering utilization of Hb-sourced nanofibrils in the electrospun PCL scaffolds for tissue engineering applications.

Fibrin-Polycaprolactone Scaffolds for the Differentiation of Human Neural Progenitor Cells into Dopaminergic Neurons.

Parkinson's disease (PD), a progressive central nervous system disorder marked by involuntary movements, poses a significant challenge in neurodegenerative research due to the gradual degeneration of dopaminergic (DA) neurons. Early diagnosis and understanding of PD's pathogenesis could slow disease progression and improve patient management. In vitro modeling with DA neurons derived from human-induced pluripotent stem cell-derived neural progenitor cells (NPCs) offers a promising approach. These neurons can be cultured on electrospun (ES) nanofibrous polycaprolactone (PCL) scaffolds, but PCL's hydrophobic nature limits cell adhesion. We investigated the ability of ES PCL scaffolds coated with hydrophilic extracellular matrix-based biomaterials, including cell basement membrane proteins, Matrigel, and Fibrin, to enhance NPC differentiation into DA neurons. We hypothesized that fibrin-coated scaffolds would maximize differentiation based on fibrin's known benefits in neuronal tissue engineering. The scaffolds both coated and uncoated were characterized using scanning electron microscopy (SEM), transmission electron microscopy, Fourier transform infrared spectroscopy-attenuated total reflectance, and dynamic mechanical analysis to assess their properties. NPCs were seeded on the coated scaffolds, differentiated, and matured into DA neurons. Immunocytochemistry targeting tyrosine hydroxylase (TH) and SEM confirmed DA neuronal differentiation and morphological changes. Electrophysiology via microelectrode array recorded their neuronal firing. Results showed enhanced neurite extension, increased TH expression, and active electrical activity in cells on fibrin-coated scaffolds. Diluted fibrin coatings particularly promoted more pronounced neuronal differentiation and maturation. This study introduces a novel tissue-on-a-chip platform for neurodegenerative disease research using DA neurons.

Silybin-Functionalized PCL Electrospun Fibrous Membranes for Potential Pharmaceutical and Biomedical Applications.

Silybin is a natural flavonolignan with potential anticancer, antioxidant, and hepatoprotective properties. In the present study, various loadings of silybin (1, 3, and 5 wt%) were encapsulated in poly-ε-caprolactone (PCL) fibers by electrospinning, in order to produce new pharmaceutical composites with improved bioactive and drug delivery properties. The morphological characteristics of the composite fibrous structures were evaluated by scanning electron microscopy (SEM), and the encapsulation efficiency and the release rate of silybin were quantified using a UV-Vis spectrophotometer. The analysis of the membranes' thermal behavior by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) revealed the existence of interaction between PCL and silybin. An investigation of the cytocompatibility of the composite membranes revealed that normal cells displayed an unimpeded proliferation in the respective silybin concentrations; however, tumor cell growth demonstrated a dose-dependent inhibition. Furthermore, an effective antioxidant activity against hydrogen peroxide-induced oxidative stress in HEK-293 cells was observed for the prepared electrospun fibrous mats.

High-performance triboelectric nanogenerator based on biocompatible electrospun polycaprolactone nanofiber and counter convex PDMS for low-frequency mechanical energy harvesting

High-performance triboelectric nanogenerator based on biocompatible electrospun polycaprolactone nanofiber and counter convex PDMS for low-frequency mechanical energy harvesting

Pre-clinical evaluation of advanced nerve guide conduits using a novel 3D in vitro testing model.

Autografts are the current gold standard for large peripheral nerve defects in clinics despite the frequently occurring side effects like donor site morbidity. Hollow nerve guidance conduits (NGC) are proposed alternatives to autografts, but failed to bridge gaps exceeding 3 cm in humans. Internal NGC guidance cues like microfibres are believed to enhance hollow NGCs by giving additional physical support for directed regeneration of Schwann cells and axons. In this study, we report a new 3D in vitro model that allows the evaluation of different intraluminal fibre scaffolds inside a complete NGC. The performance of electrospun polycaprolactone (PCL) microfibres inside 5 mm long polyethylene glycol (PEG) conduits were investigated in neuronal cell and dorsal root ganglion (DRG) cultures in vitro. Z-stack confocal microscopy revealed the aligned orientation of neuronal cells along the fibres throughout the whole NGC length and depth. The number of living cells in the centre of the scaffold was not significantly different to the tissue culture plastic (TCP) control. For ex vivo analysis, DRGs were placed on top of fibre-filled NGCs to simulate the proximal nerve stump. In 21 days of culture, Schwann cells and axons infiltrated the conduits along the microfibres with 2.2 ± 0.37 mm and 2.1 ± 0.33 mm, respectively. We conclude that this in vitro model can help define internal NGC scaffolds in the future by comparing different fibre materials, composites and dimensions in one setup prior to animal testing.

Surface-Conjugated Galactose on Electrospun Polycaprolactone Nanofibers: An Innovative Scaffold for Uterine Tissue Engineering.

The uterus, a vital organ in the female reproductive system, nurtures and supports developing embryos until maturity. This study focuses on addressing uterine related problems by creating a nanofibrous scaffold to regenerate uterine myometrial tissue, closely resembling the native extracellular matrix (ECM) for enhanced efficacy. To achieve this, we utilized polycaprolactone (PCL) as a biomaterial and employed an electrospinning technique to generate PCL nanofibers in both random and aligned orientations. Due to the inherent hydrophobic nature of PCL nanofibers, a two-step wet chemistry surface modification technique is used, involving the conjugation of galactose onto them. Galactose, a lectin-binding sugar, was chosen to enhance the scaffold's hydrophilicity, thereby improving cell adhesion and fostering l-selectin-based interactions between the scaffold and uterine cells. These interactions, in turn, activated uterine fibroblasts, leading to ECM remodeling. The optimized electrospinning process successfully generated random and aligned nanofibers. Subsequent surface modification was carried out, and the modified scaffold was subjected to various physicochemical characterization, such as the ninhydrin assay, enzyme-linked lectin assay techniques that revealed successful galactose conjugation, and mechanical characterization to assess any changes in material bulk properties resulting from the modification. The tensile strength of random galactose-modified PCL fibers reached 0.041 ± 0.01 MPa, outperforming random unmodified PCL fibers (0.026 ± 0.01 MPa), aligned unmodified PCL fibers (0.011 ± 0.001 MPa), and aligned modified PCL fibers (0.016 ± 0.002 MPa). Cytocompatibility studies with human uterine fibroblast cells showed enhanced viability and proliferation on the modified scaffolds. Initial pilot studies were attempted in the current study involving subcutaneous implantation in the dorsal area of Wistar rats to assess biocompatibility and tissue response before proceeding to intrauterine implantation indicated that the modification did not induce adverse inflammation in vivo. In conclusion, our study introduces a surface-modified PCL nanofibrous material for myometrial tissue engineering, offering promise in addressing myometrial damage and advancing uterine health and reproductive well-being.