Electrospun Nanofiber Mats Research Articles

Enhancement of 5-Fluorouracil Drug Delivery in a Graphene Oxide Containing Electrospun Chitosan/Polyvinylpyrrolidone Construct.

Electrospun nanofibrous mats, consisting of chitosan (CS) and polyvinylpyrrolidone (PVP), were constructed with the addition of graphene oxide (GO) for enhancement of delivery of the 5-Fluorouracil (5-Fu) chemotherapy drug. Upon studying the range of GO concentrations in CS/PVP, the concentration of 0.2% w/v GO was chosen for inclusion in the drug delivery model. SEM showed bead-free, homogenous fibres within this construct. This construct also proved to be non-toxic to CaCo-2 cells over 24 and 48 h exposure. The construction of a drug delivery vehicle whereby 5-Fu was loaded with and without GO in various concentrations showed several interesting findings. The presence of CS/PVP was revealed through XPS, FTIR and Raman spectroscopies. FTIR was also imperative for the analysis of 5-Fu while Raman exclusively highlighted the presence of GO in the samples. In particular, a detailed analysis of the IR spectra recorded using two FTIR spectrometers, several options for determining the concentration of 5-Fu in composite fibre systems CS/PVP/5-Fu and GO/CS/PVP/5-Fu were demonstrated. By analysis of Raman spectra in the region of D and G bands, a linear dependence of ratios of integrated intensities of AD and AG on the intensity of host polymer band at 1425 cm-1 vs. GO content was found. Both methods, therefore, can be used for monitoring of GO content and 5-Fu release in studied complex systems. After incorporating the chemotherapy drug 5-Fu into the constructs, cell viability studies were also performed. This study demonstrated that GO/CS/PVP/5-Fu constructs have potential in chemotherapy drug delivery systems.

Achieving an Ultralow-κ yet Strong and Transparent Film by Antisolvent-Confined Nanowelding of Electrospun Polyimide Nanofibers.

Developing ultralow-κ (dielectric constant) polyimides (PIs) that are mechanically robust while also being optically transparent is challenging. For the first time, we report a nanoporous PI film with an ultralow κ of 1.8 in combination with a tensile strength of up to 180 MPa, a Young's modulus of up to 6 GPa, and a transmittance of ∼88%. This is achieved by direct nanowelding of a porous electrospun PI nanofiber membrane using a simple mixture of ethanol-dominating DMAc. Benefiting from the effective evaporation of the antisolvent ethanol upon heating, the proposed nanowelding approach allows for the localized surface dissolution of the PI nanofibers, which enables the dissolved PI to "glue" the nanofibers and occupy vacant space in the membrane, resulting in the formation of a dense but nanoporous self-reinforced nanocomposite film. Our findings provide a renewed understanding of the potential of electrospun nanofibrous materials, and the underlying principle can hopefully be applied to other commodity polymers.

Lignin-containing cellulose nanocrystals enhanced electrospun polylactic acid-based nanofibrous mats: Strengthen and toughen

Biodegradable polylactic acid (PLA) nanofibrous mats prepared by electrospinning serve as suitable packaging materials. However, their practical applications are limited by their weak mechanical properties, poor thermal stability, and high cost. In this study, green and low-cost lignin-containing cellulose nanocrystals (LCNCs) with different lignin contents were developed and employed as reinforced materials to synergistically enhance the thermal, mechanical, and hydrophobic properties of PLA electrospun nanofibrous mats. The presence of moderate lignin improved the interfacial compatibility between the LCNCs and PLA, resulting in excellent mechanical properties of the nanofibrous mats. Compared to pure PLA mats, the tensile strength of the composites reached up to 21.0 MPa, representing a 6.6-fold increase. Its toughness was synchronously enhanced by 16 times, reaching a maximum of 3.6 MJ/m3. The maximum decomposition temperature of PLA/LCNCs electrospun nanofibrous mats increased from 339 °C to 365 °C. Furthermore, the increase in lignin in the LCNCs positively contributed to improving the hydrophobicity of the PLA/LCNCs electrospun nanofibrous mats. This bio-based strategy of LCNCs employed in the enhancement of fully bio-based PLA nanofibrous mats offers a viable approach for the advancement of packaging films.

Recent Progress of Electrospun Nanofiber Dressing in the Promotion of Wound Healing.

The nanofiber materials of three-dimensional spatial structure synthesized by electrospun have the characteristics of high porosity, high specific surface area, and high similarity to the natural extracellular matrix (ECM) of the human body. These are beneficial for absorbing wound exudate, effectively blocking the invasion of external bacteria, and promoting cell respiration and proliferation, which provides an ideal microenvironment for wound healing. Moreover, electrospun nanofiber dressings can flexibly load drugs according to the condition of the wound, further promoting wound healing. Recently, electrospun nanofiber materials have shown promising application prospects as medical dressings in clinical. Based on current research, this article reviewed the development history of wound dressings and the principles of electrospun technology. Subsequently, based on the types of base material, polymer-based electrospun nanofiber dressing and electrospun nanofiber dressing containing drug-releasing factors were discussed. Furthermore, the application of electrospun nanofiber dressing on skin tissue is highlighted. This review aims to provide a detailed overview of the current research on electrospun nanomaterials for wound healing, addressing challenges and suggesting future research directions to advance the field of electrospun dressings in wound healing.

Investigating the effect of Nylon 6.6 electrospun nanofiber mats and punch—Die clearance on the damaged area and residual strength of punched glass/epoxy composite laminates

Investigating the effect of Nylon 6.6 electrospun nanofiber mats and punch—Die clearance on the damaged area and residual strength of punched glass/epoxy composite laminates

Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) Self-Reinforced Composites via Solvent-Induced Interfiber Welding of Nanofibers.

In this study, we explore an approach to enhance the mechanical performance of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by utilizing the self-reinforcing effect of β-phase-induced PHBV electrospun nanofiber mats. This involves electrospinning combined with low-temperature postspun vapor solvent interfiber welding. Scanning electron microscopy imaging confirmed fiber alignment, while XRD diffraction revealed the presence of both α and β crystalline phases under optimized electrospinning conditions. The resulting composite exhibited significant improvements in mechanical properties attributed to the formation of more perfectly structured α and β polymorphs and enhanced interfacial adhesion of electrospun nanofibers after vapor solvent treatment. This approach offers entirely recyclable and biodegradable materials, presenting the potential for a new family of sustainable bioplastics.

Aligned electrospun starch-pullulan-protein fibers

Electrospun nanofiber mats with potential utility as functionalized scaffolding for cultivated meat were fabricated from octenyl succinic anhydride (OSA) modified starch, pullulan, and either glycomacropeptide (GMP) or whey protein isolate (WPI). A statistical mixture design was used to establish the influence of polymer composition on spinning dope properties including conductivity, surface tension, shear viscosity, and elasticity and relate these properties to spun fiber morphology. Component composition varied – starch 16–24 %, pullulan 4–6 %, protein 0–10 % – while maintaining the overall polymer content at 30 % w/w. The propensity for fiber beading was inversely associated with a timescale for bead formation dependent on the ratio of viscosity to surface tension and directly to a timescale for fiber solidification/drying altered by adjusting relative humidity. Smooth, continuous nanofibers, average diameter of 461–526 nm, were obtained from mixtures that contained less than 4% (w/w) protein, whereas mixtures with greater than 6% (w/w) protein resulted in fibers with beading. Generally, GMP-containing nanofibers exhibited less beading than WPI-containing nanofibers. Aligned fiber mats were produced using a rotating drum collector at different speeds varying from 3600 to 5600 rpm that may serve to template cell growth.

A Piezoelectric Electrospun Nanofiber mat (Kaolin/PVDF) for the Degradation of Methylene Blue in Water

Organic compounds of various classes have been identified as major pollutants commonly detected in several environmental freshwaters. As a potential solution, electrospun mat-like nanofibers comprising polyvinylidene fluoride (PVDF) nanofibers and kaolin clay composite were synthesized for the degradation of methylene blue dye in wastewater using piezocatalytic technique. The kaolin/PVDF composites were characterized with SEM, XRD, FTIR, Chronoamperometry and electrochemical impedance spectroscopy. The poling of the piezoelectric charges of the electrospun mat-like nanofibers, enhanced by the presence of the crystalline nature of the kaolin clay occasioned the generation of reactive species upon exposure to ultrasonic vibration. Moreover, ultrasound waves in the system prevented passivation of the mat’s active surface during piezocatalysis through continuous cleaning action. A degradation efficiency of 100% was obtained from the degradation of methylene blue dye using the synthesized kaolin/PVDF composites during piezocatalysis. This result positions the nanofiber as an effective catalyst in wastewater treatment applications.Graphical

Correction: Physico-mechanical Evaluation of Electrospun Nanofibrous Mats of Poly(3-hydroxybutyrate)/Poly(butylene succinate) Blends with Enhanced Swelling-Dynamics and Hydrolytic Degradation-Kinetics Stability for Pliable Scaffold Substrates

Correction: Physico-mechanical Evaluation of Electrospun Nanofibrous Mats of Poly(3-hydroxybutyrate)/Poly(butylene succinate) Blends with Enhanced Swelling-Dynamics and Hydrolytic Degradation-Kinetics Stability for Pliable Scaffold Substrates

Cryomilled electrospun nanofiber mats containing d-mannitol exhibit suitable for aerosol delivery of proteins

Dry powder inhalers (DPIs) are the first choice for inhalation drug development. However, some conventional DPI formulation processes require heating, which may damage high molecular weight drugs such as proteins and nucleic acids. In this study, we propose a novel DPI preparation process that avoids the use of heat. Dry powders were prepared by cryomilling nanofiber mats composed of polyvinyl alcohol, D(−)-mannitol (Man), and α-chymotrypsin (α-Chy) as the model drug using the electrospinning method. The addition of Man conferred high dispersibility and excellent in vitro aerosol performance to the nanofiber mat powder in a very short milling time (less than 0.5 min) as assessed using the Andersen cascade impactor. Powders were classified according to the degree of friability, and among these, nanofiber mats containing 15 % Man and milled for 0.25 min exhibited the highest aerosol performance. Nanofiber mats containing Man milled for less than 0.5 min also exhibited greater α-Chy enzymatic activity than a nebulized α-Chy solution. Furthermore, single inhalation induced no significant lung tissue damage as evidenced by lactate dehydrogenase activity assays of mouse bronchoalveolar lavage fluid. This novel DPI formulation process may facilitate the safe and efficient inhalational delivery of therapeutic proteins.

Formulation and Evaluation of Electrospun Nanofiber Mats of Curcumin and Leaf Extract of Tinospora cordifolia: Designed for Accelerating Diabetic Wound Healing

Traditional herbs like Tinospora cordifolia and curcumin have many therapeutic benefits. However, curcumin’s limited bioavailability is a problem. Electrospun nanofibers are an answer because they increase the effective surface area greatly, and make drug delivery better in almost all aspects. The combination in the form of nanofibers can be greatly useful in the treatment of diabetic wound healing, where curcumin, the known antibacterial and anti-inflammatory element, plays an important role. It is observed that when combined with extract of leaves of T. cordifolia, which has known antidiabetic and wound healing actions, blended in the chitosan polymer, which is itself a weak antibacterial compound hence can be one of the solutions to the menace of bacterial resistance which is very common in diabetic wound healing. This research aims to create and test electrospun nanofiber mats of curcumin and T. cordifolia leaves extract blended in chitosan as a base polymer in the treatment of diabetic wound healing. Leaves of the plant T. cordifolia, which were collected from the institute’s botanical garden, were subjected to drying and then prone to solvent extraction using methanol and acetone, resulting in the production of bioactive extracts. The curcumin was obtained as a gift sample from Sanjay Chemicals, Mumbai. Nanofibers were electrospun from chitosan, T. cordifolia leaf extract and curcumin. Characterization included scanning electron microscope (SEM), water contact angle measurement, TGA/DSC analysis, drug release studies, fourier-transform infrared (FTIR) analysis, swelling tests and in-vitro release profiling. The nanofiber mats of curcumin and leaves extract of T. cordifolia using chitosan as a base polymer were prepared and evaluated at various parameters. The results we found are very promising. The nanofibers formed by using electrospinning techniques show good content uniformity as well as good diameter which was checked using SEM. The study confirmed no component interactions using differential scanning calorimetry (DSC). The good hydrophilicity of mats was found to ensure good retention time. The study concluded with the formation of a novel formulation that can fight the menace of bacterial resistance, which is very common in the diabetic wound healing process. The formulation will ensure not only countering bacterial resistance but also the faster healing of diabetic wounds, as T. cordifolia leaves extract is known to improve angiogenesis and tissue remodeling.

Resveratrol-Ampicillin Dual-Drug Loaded Polyvinylpyrrolidone/Polyvinyl Alcohol Biomimic Electrospun Nanofiber Enriched with Collagen for Efficient Burn Wound Repair.

The healing of burn wounds is a complicated physiological process that involves several stages, including haemostasis, inflammation, proliferation, and remodelling to rebuild the skin and subcutaneous tissue integrity. Recent advancements in nanomaterials, especially nanofibers, have opened a new way for efficient healing of wounds due to burning or other injuries. This study aims to develop and characterize collagen-decorated, bilayered electrospun nanofibrous mats composed of PVP and PVA loaded with Resveratrol (RSV) and Ampicillin (AMP) to accelerate burn wound healing and tissue repair. Nanofibers with smooth surfaces and web-like structures with diameters ranging from 200 to 400 nm were successfully produced by electrospinning. These fibres exhibited excellent in vitro properties, including the ability to absorb wound exudates and undergo biodegradation over a two-week period. Additionally, these nanofibers demonstrated sustained and controlled release of encapsulated Resveratrol (RSV) and Ampicillin (AMP) through in vitro release studies. The zone of inhibition (ZOI) of PVP-PVA-RSV-AMP nanofibers against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was found 31±0.09 mm and 12±0.03, respectively, which was significantly higher as compared to positive control. Similarly, the biofilm study confirmed the significant reduction in the formation of biofilms in nanofiber-treated group against both S. aureus and E. coli. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis proved the encapsulation of RSV and AMP successfully into nanofibers and their compatibility. Haemolysis assay (%) showed no significant haemolysis (less than 5%) in nanofiber-treated groups, confirmed their cytocompatibility with red blood cells (RBCs). Cell viability assay and cell adhesion on HaCaT cells showed increased cell proliferation, indicating its biocompatibility as well as non-toxic properties. Results of the in-vivo experiments on a burn wound model demonstrated potential burn wound healing in rats confirmed by H&E-stained images and also improved the collagen synthesis in nanofibers-treated groups evidenced by Masson-trichrome staining. The ELISA assay clearly indicated the efficient downregulation of TNF-alpha and IL-6 inflammatory biomarkers after treatment with nanofibers on day 10. The RSV and AMP-loaded nanofiber mats, developed in this study, expedite burn wound healing through their multifaceted approach.

Electrospun nanofiber mats caged the mammalian macrophages on their surfaces and prevented their inflammatory responses independent of the fiber diameter

Poly-ε-caprolactone (PCL) has been widely used as biocompatible materials in tissue engineering. They have been used in mammalian cell proliferation to polarization and differentiation. Their modified versions had regulatory activities on mammalian macrophages in vitro. There are also studies suggesting different nanofiber diameters might alter the biological activities of these materials. Based on these cues, we examined the inflammatory activities and adherence properties of mammalian macrophages on electrospun PCL nanofibrous scaffolds formed with PCL having different nanofiber diameters. Our results suggest that macrophages could easily attach and get dispersed on the scaffolds. Macrophages lost their inflammatory cytokine TNF and IL6 production capacity in the presence of LPS when they were incubated on nanofibers. These effects were independent of the mean fiber diameters. Overall, the scaffolds have potential to be used as biocompatible materials to suppress excessive inflammatory reactions during tissue and organ transplantation by caging and suppressing the inflammatory cells.

Indigenous Ethiopian traditional medicinal plant leaf extract, Croton macrostachyus, loaded PCL electrospun nanofibrous mat as potential wound dressing: In vitro analysis

The main aim of this study was to investigate the potential application of an indiginous Ethiopian medicinal plant, Croton macrostachyus, into PCL nanofibers through electrospinning for the first time. Croton macrostachyus (CM) leaf has antibacterial and wound healing properties. Croton macrostachyus of 1%, 3%, 5%, and 7% (w/v) incorporated PCL nanofibrous mats were produced through electrospinning. The produced nanofibrous mats morphology observed by scanning electron microscopy (SEM) was found to be continuous, bead-free, and interconnected. The average diameters of PCL, PCL-1%CM, PCL-3%CM, PCL-5%CM, and PCL-7%CM nanofibrous mat is 309 ± 114, 271 ± 66, 235 ± 56, 226 ± 65, and 216 ± 42 nm, respectively. According to the FTIR results, the CM leaf extract was successfully incorporated into the PCL nanofibers. The bacterial reduction percentage value of PCL-1%CM, PCL-3%CM, PCL-5%CM, and PCL-7%CM nanofiber mats against S. aureus is 77.00%, 99.88%, 99.91%, and 99.99%, and 35.00%, 78.00%, 90.00%, and 99.30% against E. coli. The in vitro release study showed that there was an immediate release of CM within 24 h and then a steady sustained release of 51.36, 53.92, 54.99, and 57.12% up to 72 h at 1%, 3%, 5%, and 7% concentration, respectively. The presence of CM leaf extract in the PCL nanofiber increased the hydrophilicity of the pure PCL nanofiber (100% hydrophilic at 7% leaf extract concentration). In general, the results of the in vitro study confirmed that the PCL nanofibrous mats loaded with CM leaf extract are suitable for use as an effective wound dressing with a broad spectrum of antimicrobial activity and hydrophilic properties.

The antimicrobial synergy of polymer based nanofiber mats reinforced with antioxidants intercalated layered double hydroxides as a potential active packaging material

Perishable food post-harvest loss is a major global concern, and research is currently concentrated on creating active packaging materials. This research is focused in multiple antioxidants intercalated Layered Double Hydroxides (LDH) that are combined in one matrix, and their overall effect that defines as synergism, which successfully preserves perishable food by releasing antioxidants slowly. For this purpose, a hybrid LDH material of ascorbic-LDH (AA-LDH), salicylic-LDH (SA-LDH), and citric-LDH (CA-LDH) was synthesized, characterized and incorporate into electrospun nanofiber mat to be used as a potential active packaging material. Antioxidants intercalated Mg/Al LDH was synthesized and successfully characterized by PXRD, FTIR, XPS, Raman, SEM, and EDS. The shifts in the LDHs’ peaks in PXRD indicated the successful incorporation of antioxidants into LDH. FTIR, Raman, and XPS data clearly indicated the establishment of metal-oxygen bonds by observing the characteristic peaks. Morphological features and the layered structure were clearly observed by SEM images. Antioxidants were slowly released from the LDHs, and it was evaluated for time intervals up to 24 h. The hybrid LDH material exhibited the highest antioxidant activity with an IC50 value of 132.5 μg ml−1, where 234.1, 354.5, and 402.2 μg ml−1 were reported for ascorbic-LDH, salicylic-LDH, and citric-LDH respectively. The hybrid LDH material incorporated electrospun mats showed the best antibacterial activity against the tested bacteria and clearly evidenced the synergistic activity of the combination of the nanohybrids. It has showed a minimal bacterial growth compared to the other control samples (∼2.41 log CFU/ml). The shelf life of cherry tomatoes was studied at different physiochemical parameters with and without hybrid LDH material incorporated electrospun mats. The fabricated mat showed an extended shelf life of 42 days for cherry tomatoes, whereas the control sample showed a shelf life of 17 days. It is concluded that hybrid LDH material exhibited synergistic performance and the best antioxidant activity when comparing with mono LDH materials.

Synthesis, Optical Performance Characterization, and Durability of Electrospun PTFE-PEO Materials for Space Applications.

Passive heat management is crucial in space, especially for extended missions involving protection from sunlight. Thermal coatings with desirable optical properties can drastically reduce the power consumed by active cooling systems, thereby reserving more resources for other critical systems onboard. Specifically, materials with wavelength-dependent reflectance and emittance are desirable for managing incident sunlight and self-cooling by thermal emission. This study demonstrates the use of polymer nanofibers, specifically poly(tetrafluoroethylene) (PTFE), for passive temperature control in space applications. This study describes the electrospinning fabrication process to create nanofibers and how process parameters can be varied to control the fiber geometry. We combine poly(tetrafluoroethylene) (PTFE) and poly(ethylene oxide) (PEO) polymers to fabricate highly reflective thermal control materials by electrospinning. To understand the role of material and fiber geometry, we measure spectral reflectance, absorptance, and transmittance using spectrophotometers interfaced with integrating spheres. We control the materials' fiber geometry and solar reflectance by modifying the solution properties, flow rate, rotating collector speed, and fabrication time. With 220-1560 μm thick electrospun nanofiber materials, we demonstrate an average solar reflectance of 94.73-99.75%, with values approaching 99.9% for thicker samples, which is among the highest for space applications. Meanwhile, a thermal emittance of 81.4% was observed at 300 K for a 3360 μm thick sample. The durability of these samples was also tested under ultraviolet light and atomic oxygen. Compared to the state-of-the-art materials, the electrospun PTFE-PEO fibers present a new paradigm for passive thermal management in space applications.

Heat transport during drop impact onto a heated wall covered with an electrospun nanofiber mat: The influence of wall superheat, impact velocity, and mat thickness

Nanofiber surface coating is a promising method for the enhancement of heat transfer during spray cooling. In the present work, the drop dynamics as well as local and overall heat transfer during single drop impact onto a heated wall covered with a polyacrylonitrile (PAN) nanofiber mat are investigated to obtain insight into the mechanisms governing the heat transport enhancement. The influence of wall superheat, drop impact velocity, and mat thickness on the hydrodynamics and heat transfer from the heated wall to the fluid is studied. The experiments were conducted inside a temperature-controlled test cell with a pure vapor atmosphere maintained with refrigerant FC−72 (perfluorohexane). The temperature field at the solid–fluid interface was observed with a high-speed infrared camera, and the heat flux field was derived by solving a three-dimensional transient heat conduction equation within the substrate. The presence of the nanofiber mat on the heater surface suppresses the drop receding phase due to the pinning of the contact line at the end of the spreading phase. Two different heat transfer scenarios are observed depending on the wall superheat and drop impact velocity: scenario (I), in which the liquid drop completely penetrated through the porous nanofiber mat and made contact with the heater surface; and scenario (II) in which the vapor produced inside the pores of the nanofiber mat prevented the liquid drop from touching the heater surface. In scenario (I), an up 450% heat flow enhancement during the sessile drop evaporation stage has been observed. In scenario (II), a 80% heat flow enhancement at this stage has been registered.

Improving structural and functional properties of starch-catechin-based green nanofiber mats for active food packaging by electrospinning and crosslinking techniques

The hydrophilic and low mechanical properties limited the application of starch-based films. In this work, a hydrophobic starch-based nanofiber mat was first successfully prepared from aqueous solution at room temperature by using electrospinning and glutaraldehyde (GTA) vapor phase crosslinking techniques for active packaging applications. Catechin (CAT) was immobilized in the nanofibers by electrospinning, resulting in higher thermal stability (Tdmax = 315.23 °C), antioxidant (DPPH scavenging activity = 94.31 ± 2.70 %) and antimicrobial (inhibition zone diameter = 15.6 ± 0.3 mm) of the fibers, which further demonstrated hydrogen bonding and electrostatic interaction between CAT and fibers. Nanofibers after GTA vapor phase crosslinking exhibited enhanced hydrophobicity (water contact angle: 15.6 ± 1.5° → 93.5 ± 2.3°) and mechanical properties (tensile strength: 1.82 ± 0.06 MPa → 7.64 ± 0.24 MPa, elastic modulus: 19.35 ± 0.63 MPa → 45.34 ± 0.51 MPa). The results demonstrated that preparation of starch-based electrospun nanofiber mats in aqueous system at room temperature overcame the challenges of organic solvent pollution and thermosensitive material encapsulation, while GTA vapor phase crosslinking technique improved the hydrophobicity and mechanical properties of nanofiber mats, which facilitated the application of starch-based materials in the field of packaging.

Multifunctional embelin- poly (3-hydroxybutyric acid) and sodium alginate-based core-shell electrospun nanofibrous mat for wound healing applications

In this study, coaxial electrospinning is employed to make core-shell fibers, which represents a major advance in biomaterial innovation. Fibers that combine a protective shell and a therapeutic agent-loaded core, herald a revolutionary era in tissue engineering and wound care. Besides supporting cell growth, these fibers also preserve sterility, which makes them ideal for advanced wound dressings. We used embelin as the basis for this study because of its natural antibacterial properties. Its effectiveness in inhibiting the growth of bacteria made it the ideal candidate for our research. We have synthesized core-shell nanofibers that contain Sodium Alginate (SAL) in a Poly (ethylene oxide) (PEO) shell and Embelin in a Poly (3-hydroxybutyric acid) (PHB) core, which exhibit the homogeneity and flawless structure required for biomedical applications. When using SAL-PEO and EMB-PHB solutions dissolved in 1,1,1,3,3,3 hexafluoro-2-propanol (HFIP), high consistency in results can be achieved. A biocompatibility study was conducted using NIH-3T3 fibroblasts, which demonstrated remarkable adhesion and proliferation, with over 95 % growth supporting both PHB + SAL-PEO and EMB-PHB + SAL-PEO fibers. In addition, the scaffold loaded with Embelin shows strong antibacterial activity and cytocompatibility. The combined activity demonstrates the potential of EMB-PHB + SAL-PEO fibers in wound healing, where tissue regeneration and preservation of sterility are crucial. The optimized concentration of Embelin within these scaffolds demonstrates robust antibacterial efficacy while exhibiting minimal toxicity, thus positioning them as highly promising candidates for a wide range of biological applications, including wound healing.

Current Update on Electrospun Nanofiber Mats as a Wound Healing Drug Carrier

Electrospun nanofiber mats are being researched as attractive wound-healing drug carriers owing to their exclusive features, large active surface area, interlinked porosity, and customizable drug release kinetics. These mats may be infused with antibiotics, growth hormones, or stem cells to hasten the process of healing and lessen the likelihood of problems. Controlled and sustained medication delivery is the key payback of electrospun nanofiber mats. Electrospun nanofiber mats promote wound healing in part because of the favorable milieu they provide cell adhesion and proliferation of the affected tissue due to their enhanced active surface area. Mats of many kinds are discussed in the review. Electrospun nanofiber membranes can be created in a diversity of configurations, along with a single layer, a coaxial structure, and many layers. Recent studies have shown the efficacy of using electrospun nanofiber mats to deliver a variety of therapeutic compounds for wound healing. Treatment of wound infections using antibiotic-loaded electrospun nanofiber mats may help slow the spread of antibiotic-resistant bacteria. Electrospun nanofiber mats supplemented with growth hormones are known to hasten wound healing by encouraging the local tissue’s proliferation and differentiation. Delivery of stem cells to the wound site, where they may develop into new skin cells and stimulate tissue regeneration, can be accomplished with the help of electrospun nanofiber mats. In conclusion, electrospun nanofiber mats provide an exciting new platform for the delivery of drugs to promote wound healing. Their enormous surface area, interconnected porosity, and adaptable drug release kinetics all make them excellent vehicles for delivering a wide range of therapeutic medicines to the wound site.