Electrospray Ionization Mass Spectrometry System Research Articles

Chemical Mobilization-Based Capillary Isoelectric Focusing-Mass Spectrometry Using the nanoCEasy Interface for Pharmaceutical Protein Analysis.

Capillary isoelectric focusing (CIEF) coupled with electrospray ionization mass spectrometry (ESI-MS) is regarded as an outstanding approach for protein and proteoform analysis, combining a high-resolution separation technique and an enhanced detection technique. The few so-far developed CIEF-ESI-MS approaches exhibit limitations regarding sensitivity and separation performance. Here, we report a new generic methodology for CIEF-ESI-MS based on chemical mobilization, leading to highly efficient separation. This new integrated methodology relies on exchanging catholyte, initially introduced in the nanoCEasy interface in the focusing step, with sheath liquid (SL) in order to chemically mobilize the analytes into the ESI-MS system. The CIEF-MS method is evaluated by separation of a peptide set, model proteins, and monoclonal antibody charge variants. The effect of various parameters including master mixture composition, field strength, catholyte, SL composition, focusing time, and capillary conditions is optimized and discussed. Excellent separation performance can be achieved with a pI resolution down to 0.1 pH unit. The mobilization reproducibility is demonstrated with "migration time" RSDs below 10%. Additionally, the chemical mobilization is compared with the pressure assistance-chemical mobilization method, demonstrating that even a small pressure causes a strong decrease in separation performance, which clearly indicates the benefit of the chemical mobilization-based method. The applicability and separation power of the developed method are further exhibited by separation of Fc-conjugated insulins (mass = 62 kDa) differing in only one amino acid.

In-situ growth of covalent organic framework on stainless steel needles as solid-phase microextraction probe coupled with electrospray ionization mass spectrometry for rapid and sensitive determination of tricyclic antidepressants in biosamples

Tricyclic antidepressants (TCAs) including amitriptyline (AT), doxepin (DOX) and nortriptyline (NT) are the first-line drugs for the clinical treatment of depression; however, monitoring TCA concentrations in biological fluids and tissues is necessary to improve therapeutic effect and determine the cause of death in patients. It is of great significance to develop a rapid and sensitive method for real-time monitoring of TCAs in various biosamples. In this work, we fabricated a novel covalent organic framework (COF) based solid-phase microextraction (SPME) probe by an in-situ step-by-step strategy, which was obtained by sequentially modifying 1,3,5-tri (4-aminophenyl) benzene (TPB) and 2, 5-divinylbenzaldehyde (DVA) on the surface of polydopamine layer. The TPB-DVA-COF-SPME probe possessed high specific surface area (1244 m2·g − 1), regular pores (3.23 nm), good hydrophobicity and stability, resulting in efficient enrichment for TCAs. Furthermore, the combination of TPB-DVA-COF-SPME probe and ambient electrospray ionization mass spectrometry system (ESI/MS) was firstly proposed for rapid and sensitive determination of TCAs in biosamples. As a result, the developed method exhibited low limits of detection (LODs) (0.1–0.5 μg∙L − 1), high enrichment factors (39–218), and low relative standard deviations (RSDs) for one probe (1.2–3.8%) and probe-to-probe (2.0–3.7%). Benefiting from these outstanding performance, TPB-DVA-COF-SPME probe was further successfully applied to biosamples (i.e., serum, liver, kidney, and brain) with excellent reusability, indicating the promising applicability of the TPB-DVA-COF-SPME-ESI/MS as a powerful tool for drug monitoring.

Covalent organic framework-based solid phase microextraction coupled with electrospray ionization mass spectrometry for sensitive screening and quantitative evaluation of carbamazepine and its metabolite in mice

Carbamazepine (CBZ) and its metabolite carbamazepine-10,11-epoxide (CBZEP) play vital role in the treatment of epilepsy. It is of great importance to develop a method for rapid and sensitive monitoring of CBZ and CBZEP due to their narrow therapeutic index. Herein, an imine-linked-based covalent organic framework was synthesized by using 1,3,5-tris (4-aminophenyl) benzene (TPB) and 1,3,5-triformylbenzene (TFB) (denoted as TPB-TFB-COF)，and applied as a solid-phase microextraction (SPME) probe for extracting CBZ and CBZEP. The TPB-TFB-COF showed large surface areas (371 m2 g−1), high regular porosity (1.23 nm) and extraordinary stability, which rendered it an ideal adsorbent for highly efficient enrichment of CBZ and CBZEP. Accordingly, an attractive strategy of the combination of the TPB-TFB–COF–based SPME probe and electrospray ionization mass spectrometry system (ESI/MS) was proposed for rapid screening and sensitive monitoring of CBZ and CBZEP. Under the optimized parameters, the developed method exhibited good linearity for CBZ and CBZEP in the range of 4–1000 μg L−1 with correlation coefficient (r) no less than 0.9953, and the corresponding limits of detection (LODs) were 0.4 and 2.5 μg L−1, respectively. Moreover, high enrichment factors (EFs, 202–351 folds) and satisfactory relative standard deviations (RSDs) of one probe (3.3–5.1%) and probe-to-probe (4.8–5.6%) were obtained. By using the proposed method, sensitive screening and quantitative evaluation of CBZ and CBZEP in mice whole blood and tissue homogenates were successfully achieved, indicating the promising applicability of the TPB-TFB–COF–SPME-AMIS as a powerful tool for drug monitoring.

Determination of the binding of natural products to the human c-myb oncogene promoter G-quadruplex DNA by capillary electrophoresis and electrospray ionization mass spectrometry

The relationship between a drug and its target directly affects its pharmacology and efficacy. Drug-target binding ability and binding stoichiometry are essential characterization data in pharmaceutical research. The c-myb proto-oncogene encodes a crucial transcription factor that is involved in proliferation, differentiation, and maturation during hematopoiesis. Recent studies have found that the human oncogene c-myb is overexpressed in cancer tissues such as colorectal cancer. C-myb has become a potential therapeutic target for colorectal cancer, leukemia, and other cancers. A guanine (G)-rich DNA sequence located in the promoter region of c-myb can be spontaneously folded to form an intra-molecular G-quadruplex (G4) with cationic induction. The specific recognition of small molecules can stabilize this G4 folding, thus regulating the transcription and expression of c-myb. In this study, pressure assisted capillary electrophoresis frontier analysis (PACE-FA) combined with electrospray ionization mass spectrometry (ESI-MS) was used to investigate the interactions between the human c-myb promoter G4 and natural product molecules. In PACE-FA, an external pressure (no more than 13.8 kPa) in the same direction of the migration of the analyte was used in capillary electrophoresis frontier analysis (CE-FA), which greatly sped up the analysis while maintaining the accuracy of the results. Meanwhile, the combination of PACE-FA and ESI-MS could rapidly determine the affinity and stoichiometric relationship between binding molecules and targets. First, the intramolecular parallel-stranded G4 formation of the c-myb promoter sequence in the presence of cations (K+, NH4+) was investigated by circular dichroism (CD) and ESI-MS. Then, ESI-MS was used to rapidly screen the natural products for candidate molecules that bound the target G4 DNA. The binding interactions were measured by mixing the c-myb DNA with each natural product separately in a 1:4 molar ratio, and then directly infusing these mixtures into the ESI-MS system. From the ESI-MS spectra, IRa values calculated from the relative intensities of DNA and its complex ions were used to probe the binding affinities of the natural products. This parameter denotes the relative binding affinity for a small molecule with the G4 DNA. Three natural products were identified through the screen, and their binding affinities to G4 DNA were ranked as follows:pseudolaric acid B > scopolamine butylbromide > nuciferine. Considering that both specific and non-specific binding existed in the solution phase, a free solution method using PACE-FA was developed to further test the binding ability of these products to the c-myb promoter G4 DNA. In the PACE-FA experiments, the pre-equilibrated mixture of the c-myb G4 DNA and the selected ligand was injected into the capillary prior to separation. Upon applying voltage and an external pressure (6.9 kPa) to the capillary, different species of analytes in the sample migrated at their own rates due to their different sizes and charges. The results showed that scopolamine butylbromide could bind specifically to target G4 DNA with 1:1 stoichiometry and a binding constant of 1.18×105 L/mol. Nuciferine's binding to G4 DNA showed a linear increasing trend due to nonspecific binding; thus nuciferine is a nonspecific binder. Although pseudolaric acid B showed high affinity for the c-myb G4 DNA and 1:1 and 1:2 G4-bound complex ions were observed in ESI-MS measurements, the PACE-FA results indicated that pseudolaric acid B did not bind to target G4 DNA in free solution. Therefore, scopolamine butylbromide could be the best candidate to regulate the transcription of the c-myb oncogene, and is expected to be a precursor for anticancer drugs. In this work, PACE-FA has allowed for significant improvements to the conventional CE-FA technique. This combination of PACE-FA and ESI-MS not only reduced the time needed for binding analysis, but also improved the accuracy and specificity of the affinity analysis compared to conventional binding approaches. Furthermore, this combination could be used to screen other targeted drug candidates and to evaluate their interaction mechanisms.

Laser dissection sampling modes for direct mass spectral analysis

Laser microdissection coupled directly with mass spectrometry provides the capability of on-line analysis of substrates with high spatial resolution, high collection efficiency, and freedom on shape and size of the sampling area. Establishing the merits and capabilities of the different sampling modes that the system provides is necessary in order to select the best sampling mode for characterizing analytically challenging samples. The capabilities of laser ablation spot sampling, laser ablation raster sampling, and laser 'cut and drop' sampling modes of a hybrid optical microscopy/laser ablation liquid vortex capture electrospray ionization mass spectrometry system were compared for the analysis of single cells and tissue. Single Chlamydomonas reinhardtii cells were monitored for their monogalactosyldiacylglycerol (MGDG) and diacylglyceryltrimethylhomo-Ser (DGTS) lipid content using the laser spot sampling mode, which was capable of ablating individual cells (~4-15 μm) even when agglomerated together. Turbid Allium Cepa cells (~150 μm) having unique shapes difficult to precisely measure using the other sampling modes could be ablated in their entirety using laser raster sampling. Intact microdissections of specific regions of a cocaine-dosed mouse brain tissue were compared using laser 'cut and drop' sampling. Since in laser 'cut and drop' sampling whole and otherwise unmodified sections are captured into the probe, 100% collection efficiencies were achieved. Laser ablation spot sampling has the highest spatial resolution of any sampling mode, while laser ablation raster sampling has the highest sampling area adaptability of the sampling modes. Laser ablation spot sampling has the highest spatial resolution of any sampling mode, useful in this case for the analysis of single cells. Laser ablation raster sampling was best for sampling regions with unique shapes that are difficult to measure using other sampling modes. Laser 'cut and drop' sampling can be used for cases where the highest sensitivity is needed, for example, monitoring drugs present in trace amounts in tissue.

Ultrasensitive determination of 5-methylcytosine and 5-hydroxymethylcytosine in genomic DNA by sheathless interfaced capillary electrophoresis-mass spectrometry.

A newly developed sheathless interface for capillary electrophoresis-mass spectrometry, using a porous tip sprayer, was first applied for highly sensitive determination of cytosine modifications. The system performed well in identification and quantification of both 5-methylcytosine and 5-hydroxymethylcytosine using only 125 pg (∼20 cells) genomic DNA samples.

Micropatch‐arrayed pads for non‐invasive spatial and temporal profiling of topical drugs on skin surface

Micropatch-arrayed pads (MAPAs) are presented as a facile and sensitive sampling method for spatial profiling of topical agents adsorbed on the surface of skin. MAPAs are 28 × 28 mm sized pieces of polytetrafluoroethylene containing plurality of cavities filled with agarose hydrogel. They are affixed onto skin for 10 min with the purpose to collect drugs applied topically. Polar compounds are absorbed by the hydrogel micropatches. The probes are subsequently scanned by an automated nanospray desorption electrospray ionization mass spectrometry system operated in the tapping dual-polarity mode. When the liquid junction gets into contact with every micropatch, polar compounds absorbed in the hydrogel matrix are desorbed and transferred to the ion source. A 3D-printed interface prevents evaporation of hydrogel micropatches assuring good reproducibility and sensitivity. MAPAs have been applied to follow dispersion of topical drugs applied to human skin in vivo and to porcine skin ex vivo, in the form of self-adhesive patches. Spatiotemporal characteristics of the drug dispersion process have been revealed using this non-invasive test. Differences between drug dispersion in vivo and ex vivo could be observed. We envision that MAPAs can be used to investigate spatiotemporal kinetics of various topical agents utilized in medical treatment.

Transmission geometry laser ablation into a non-contact liquid vortex capture probe for mass spectrometry imaging.

Capture of material from a laser ablation plume into a continuous flow stream of solvent provides the means for uninterrupted sampling, transport and ionization of collected material for coupling with mass spectral analysis. Reported here is the use of vertically aligned transmission geometry laser ablation in combination with a new non-contact liquid vortex capture probe coupled with electrospray ionization for spot sampling and chemical imaging with mass spectrometry. A vertically aligned continuous flow liquid vortex capture probe was positioned directly underneath a sample surface in a transmission geometry laser ablation (355 nm, 10 Hz, 7 ns pulse width) set up to capture into solution the ablated material. The outlet of the vortex probe was coupled to the Turbo V™ ion source of an AB SCIEX TripleTOF 5600+ mass spectrometer. System operation and performance metrics were tested using inked patterns and thin tissue sections. Glass slides and slides designed especially for laser capture microdissection, viz., DIRECTOR(®) slides and PEN 1.0 (polyethylene naphthalate) membrane slides, were used as sample substrates. The estimated capture efficiency of laser-ablated material was 24%, which was enabled by the use of a probe with large liquid surface area (~2.8 mm(2) ) and with gravity to help direct ablated material vertically down towards the probe. The swirling vortex action of the liquid surface potentially enhanced capture and dissolution not only of particulates, but also of gaseous products of the laser ablation. The use of DIRECTOR(®) slides and PEN 1.0 (polyethylene naphthalate) membrane slides as sample substrates enabled effective ablation of a wide range of sample types (basic blue 7, polypropylene glycol, insulin and cyctochrome c) without photodamage using a UV laser. Imaging resolution of about 6 µm was demonstrated for stamped ink on DIRECTOR(®) slides based on the ability to distinguish features present both in the optical and in the chemical image. This imaging resolution was 20 times better than the previous best reported results with laser ablation/liquid sample capture mass spectrometry imaging. Using thin sections of brain tissue the chemical image of a selected lipid was obtained with an estimated imaging resolution of about 50 µm. A vertically aligned, transmission geometry laser ablation liquid vortex capture probe, electrospray ionization mass spectrometry system provides an effective means for spatially resolved spot sampling and imaging with mass spectrometry.

On-chip electromembrane extraction for monitoring drug metabolism in real time by electrospray ionization mass spectrometry

A temperature controlled (37 °C) metabolic reaction chamber with a volume of 1 mL was coupled directly to electrospray ionization mass spectrometry (ESI-MS) by the use of a 50 μm deep counter flow micro-chip electromembrane extraction (EME) system. The EME/ESI-MS system was used to study the in vitro metabolism of amitriptyline in real time. There was no need to stop the metabolisms by protein precipitation as in conventional metabolic studies, since the EME selectively extracted the drug and metabolites from the reaction solution comprised of rat liver microsomes in buffer. Compositional changes in the reaction chamber were continuously detected 9 seconds later in the MS. Most of this time delay was due to transport of the purified extract towards the ESI source. The EME step effectively removed the enzymatic material, buffer and salts from the reaction mixture, and prevented these species from being introduced into the ESI-MS system. The on-chip EME/ESI-MS system provided repeatability for the amitriptyline signal intensity within 3.1% relative standard deviation (RSD) (n = 6), gave a linear response for amitriptyline in the tested concentration range of 0.25 to 15 μM, and was found not to be prone to ion-suppression from major metabolites introduced simultaneously into the EME/ESI-MS system. The setup allowed the study of fast reactions kinetics. The half-life, t(1/2), for the metabolism of 10 μM amitriptyline was 1.4 minutes with a 12.6% RSD (n = 6).

High‐performance thin‐layer chromatography plate blotting for liquid microjunction surface sampling probe mass spectrometric analysis of analytes separated on a wettable phase plate

A blotting method that transfers analytes separated on wettable high-performance thin-layer chromatography (HPTLC) plates to a hydrophobic reversed-phase C8 HPLTC plate suitable for analysis with a liquid microjunction surface sampling probe electrospray ionization mass spectrometry system was described and demonstrated. The simple blotting procedure transfers the analyte from the wettable plate to the topmost surface of a rigidly backed, easy-to-mount hydrophobic substrate that already has been proven viable for analysis by this sampling probe/mass spectrometry system. The utility of the approach was demonstrated by the analysis of a four-component peptide mixture originally separated on a ProteoChrom® HPTLC cellulose sheet and then blotted onto the reversed-phase HPTLC plate.

Open-Tubular Capillary Electrochromatography Coupled with Electrospray Ionization Mass Spectrometry for Peptide Analysis

In this study, the open-tubular electrochromatographic (OT-CEC) migration behavior of various peptides has been characterized using etched and chemically (n-octadecyl- and cholesterol-) modified capillaries, interfaced to an electrospray ionization mass spectrometer through a sheath liquid configuration. The stationary phases were fabricated by etching the inner wall of the fused-silica capillary and then chemically modifying the new surface through a silanization/hydrosilation reaction. Unlike some other OT-CEC stationary-phase preparation methods, leaching of the immobilized stationary phase and subsequent contamination of the electrospray ion source was largely avoided with this novel surface modification technology. The influence of the immobilized organic phases and those of the buffer electrolytes (pH, the type and content of organic solvent) on the retention and separation of the selected peptides was investigated. Significant peptide retention was found even at very low pH with both types of stationary phases, under conditions whereby the electrophoretic migration dominated the separation process. Due to the effective coverage of the etched surface by a silanization/hydrosilation reaction, adverse adsorption of charged analytes onto the capillary wall was minimized. As a result, very efficient and highly reproducible peptide separations were achieved over a broad pH range. Moreover, peptide-specific multizoning effects were observed. The origin of this novel phenomenon was explored. Compared to capillary electrophoresis electrospray ionization mass spectrometry system, much higher detection sensitivity could be obtained, since a larger amount of sample could be injected and stacked at the head of the open-tubular capillary column without deteriorating the separation performance. On the basis of these observations, these procedures have been adapted to allow the analysis of tryptic peptides generated from proteins.

Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.

Quantification of the sensitivity increase of a micro-high-performance liquid chromatography–electrospray ionization mass spectrometry system with decreasing column diameter

This study details the sensitivity achieved with capillary columns when used with a micro-HPLC–electrospray ionization MS system. It is comprised of two sections, the first is the comparative study of three columns, one of narrow-bore diameter and two of capillary diameter. The second section compares three columns of decreasing diameter in the capillary scale. All the experiments achieved enhanced sensitivity using capillary columns. The increase in the experimental MS response ranged from −20% to +20% compared to the UV experimental response when decreasing the internal diameter of the columns used. When comparing the experimental MS response to the maximum theoretical UV response achievable, the increase in response ranged from 40 to 50%.

Quantitative bioanalysis utilizing high-performance liquid chromatography/electrospray mass spectrometry via selected-ion monitoring of the sodium ion adduct [M+Na]+.

A high-performance liquid chromatography (HPLC)/electrospray mass spectrometric method for quantitative determination of a compound in dog plasma was developed and validated via the selected-ion monitoring of the electrospray-generated [M+Na]+ adduct of the compound. The plasma samples were acidified with HCl and then extracted with methyl tert-butyl ether. The reconstituted extracts were injected into an HPLC/positive-ion electrospray ionization mass spectrometry system. The HPLC mobile phase consisted of acetonitrile, water, formic acid (3 mM) and sodium acetate (0.3 mM). This composition of mobile phase provided the optimum electrospray condition for the formation of the [M+Na](+)-ion. This work demonstrates that the addition of sodium acetate into the HPLC mobile phase and the subsequent selected-ion monitoring of the sodium ion adduct of the analyte is a viable approach in quantitative bioanalysis. The facile formation of the sodium ion adduct of the analyte, which does not contain functional groups that are known to be strong proton acceptors, appears to be a function of the particular electrospray instrument used.