Electrospray Assisted Laser Desorption Ionization Research Articles

Advances in thin layer chromatography coupled with mass spectrometry technology

Thin layer chromatography (TLC) is a very useful liquid chromatography approach. The simple device, convenient operation, versatility, high throughput capabilities, low cost, and simple sample pretreatments make it widely employed in various fields. In recent years, TLC-MS has become one of the most prominent trends for this technology as developments of modern analytical technology and comprehensive application of different approaches. With the development and upgrading of medicine, food, and scientific instrument industries, it is believed that TLC-MS technology should play a better role and obtain an opportunity for development. This study reviewed TLC-MS interface technologies (most of which are in recent 10 years) based on more than 150 studies and classified these TLC-MS technologies as three strategies. The first is indirect coupling using commercially available interface instruments. The second is TLC-in-site detection directly with special MS ion source devices like fast-atom-bombardment desorption ionization, matrix-assisted laser desorption ionization, surface-assisted laser desorption ionization, electrospray-assisted laser desorption ionization, laser-induced acoustic desorption/electrospray ionization, electrostatic-spray ionization, easy ambient sonic-spray ionization, desorption sonic spray ionization, ionization using "desorption/ionization resource", ionization using "molecular ionization-desorption analysis source", multiwavelength laser desorption ionization, ionization using flowing afterglow-atmospheric pressure glow discharge, ionization low-temperature plasma probe, desorption/ionization induced using neutral clusters, ionization using inductively coupled plasma and so on. These MS analyses are performed after TLC development, thus, the relative position of the chromatographic bands on TLCs is invariable, and this analysis can be regarded as static detection, though flexible travel stages or conveyor belts can be introduced to move TLC plates. The third strategy is to monitor TLC run using MS in real-time just as the monitor employed in HPLC, in which the chromatographic bands are still moving. This strategy is generally run on forced-flow TLC techniques and is less examined. The typical coupling technologies (especially appeared in recent ten years) are summarized and briefly described in this study. TLC-MS has greatly enhanced the research efficiency of bioactive substances for food and drugs due to the widespread usage of TLC-bioautography technology. Nowadays, the main bottleneck in the development of TLC-MS is the design and commercialization of "plug and play" components. The high-throughput and real-time monitoring TLC-MS technology with flexible scanning functions is also expected. Furthermore, the comparative studies of different kinds of desorbing-ionizing technologies are also application problems for further discussion.

Detection of trace ink compounds in erased handwritings using electrospray-assisted laser desorption ionization mass spectrometry.

Writings made with erasable pens on paper surfaces can either be rubbed off with an eraser or rendered invisible by changing the temperature of the ink. However, trace ink compounds still remain in the paper fibers even after rubbing or rendering. The detection of these ink compounds from erased handwritings will be helpful in knowing the written history of the paper. In this study, electrospray-assisted laser desorption ionization/mass spectrometry was used to characterize trace ink compounds remaining in visible and invisible ink lines. The ink compounds were desorbed from the paper surface by irradiating the handwritings with a pulsed laser beam; the desorbed analytes were subsequently ionized in an electrospray plume and detected by a quadrupole time-of-flight mass spectrometry mass analyzer. Because of the high spatial resolution of the laser beam, electrospray-assisted laser desorption ionization/mass spectrometry analysis resulted in minimal damage to the sample documents.

Mass spectrometry imaging for visualizing organic analytes in food

The demand for rapid chemical imaging of food products steadily increases. Mass spectrometry (MS) is featured by excellent molecular specificity of analysis and is, therefore, a very attractive method for chemical profiling. MS for food imaging has increased significantly over the past decade, aided by the emergence of various ambient ionization techniques that allow direct and rapid analysis in ambient environment. In this article, the current status of food imaging with MSI is reviewed. The described approaches include matrix-assisted laser desorption/ionization (MALDI), but emphasize desorption atmospheric pressure photoionization (DAPPI), electrospray-assisted laser desorption/ionization (ELDI), probe electrospray ionization (PESI), surface desorption atmospheric pressure chemical ionization (SDAPCI), and laser ablation flowing atmospheric pressure afterglow (LA-FAPA). The methods are compared with regard to spatial resolution; analysis speed and time; limit of detection; and technical aspects. The performance of each method is illustrated with the description of a related application. Specific requirements in food imaging are discussed.

Building Blocks for the Development of an Interface for High-Throughput Thin Layer Chromatography/Ambient Mass Spectrometric Analysis: A Green Methodology

Interfacing thin layer chromatography (TLC) with ambient mass spectrometry (AMS) has been an important area of analytical chemistry because of its capability to rapidly separate and characterize the chemical compounds. In this study, we have developed a high-throughput TLC-AMS system using building blocks to deal, deliver, and collect the TLC plate through an electrospray-assisted laser desorption ionization (ELDI) source. This is the first demonstration of the use of building blocks to construct and test the TLC-MS interfacing system. With the advantages of being readily available, cheap, reusable, and extremely easy to modify without consuming any material or reagent, the use of building blocks to develop the TLC-AMS interface is undoubtedly a green methodology. The TLC plate delivery system consists of a storage box, plate dealing component, conveyer, light sensor, and plate collecting box. During a TLC-AMS analysis, the TLC plate was sent to the conveyer from a stack of TLC plates placed in the storage box. As the TLC plate passed through the ELDI source, the chemical compounds separated on the plate would be desorbed by laser desorption and subsequently postionized by electrospray ionization. The samples, including a mixture of synthetic dyes and extracts of pharmaceutical drugs, were analyzed to demonstrate the capability of this TLC-ELDI/MS system for high-throughput analysis.

Studies of Heterogeneous/Homogeneous Ion-Molecule Reactions by Ambient Ionization Mass Spectrometry

The general concepts, features and applications of ambient ionization mass spectrometry for studying the heterogeneous/homogeneous ion-molecule reactions are reviewed. Important ambient ionization mass spectrometric methods and their applications in organic chemistry are summarized, focusing on SESI (secondary electrospray ionization), DESI (desorption electrospray ionization-mass spectrometry), ESSI (electrosonic spray ionization), EESI (extractive electrospray ionization-mass spectrometry), ELDI (electrospray-assisted laser desorption/ionization), LTP (low-temperature plasma probe) and APTDI (atmospheric-pressure thermal desorption ionization) technologies. At the same time, the advantages of ambient ionization mass spectrometry in studying organic reactions allow chemists to explore new type of organic reactions, probe reaction mechanisms and to intercept/characterize transient reactive intermediates in ambient condition. Keywords: Ambient mass spectrometry, ionization, desorption, transient reactive intermediates, heterogeneous/homogeneous ion-molecule reaction, Gas phase ion-molecule reaction, analytical technique, organic reactions, atom bombardment, atmospheric pressure, intrinsic, Electrospray Ionization, Nebulizing Gas, unsaturated lipid, ozone

Technological Advancements in Mass Spectrometry and Its Impact on Proteomics

Amalgamation of mass spectrometry (MS) and proteomics has led to the most awaited technological inventions such as discovery of clinically potential biomarkers and generation of effective drugs. This review focuses on the synergistic growth in MS instrumentation, proteomics and its impact on biomedical sciences. Novel ionization methods: surface enhanced laser desorption ionization, electrospray assisted laser desorption ionization, desorption electrospray ionization, laser diode thermal desorption are discussed. Different mass analyzers: ion trap, time-of-flight, Fourier transform ion cyclotron resonance and their applications are outlined. New ion fragmentation techniques: electron capture dissociation, electron transfer dissociation, infrared multiphoton dissociation and their attributes are described.

Effects of matrix, electrospray solution, and laser light on the desorption and ionization mechanisms in electrospray-assisted laser desorption ionization mass spectrometry

Electrospray-assisted laser desorption ionization (ELDI) is a technique which combines laser desorption with subsequent electrospray ionization. It is useful for directly detecting small and large molecules in solid or liquid samples under ambient conditions. In this paper, the detection of the protein molecules desorbed on a dry protein spot by using pulse laser energies of up to 300 microJ was demonstrated. The influences of organic and inorganic matrices, the laser energy, the laser wavelength, and the sample plate material on desorption of protein molecules from sample plates were discussed. In addition, the effects of the composition of the electrospray solution on the ionization of the desorbed protein molecules were studied.

Electrospray-assisted laser desorption ionization mass spectrometry (ELDI-MS) with an infrared laser for characterizing peptides and proteins.

An electrospray-assisted laser desorption/ionization source with an infrared OPO laser (IR-ELDI) was constructed and optimized for peptide and protein mass spectrometry analysis. Similar to ELDI with an ultraviolet laser, IR-ELDI generates multiply charged molecules for peptides and proteins measured under ambient sampling conditions. Both samples in the dried state and analyte solutions can be directly measured by IR-ELDI without the presence of a conventional MALDI matrix. However, the analysis of sample solutions is shown to greatly enhance the sensitivity of the mass spectrometry measurement, as a 100-fold sensitivity gain for peptide measurements was measured. The limit of detection of IR-ELDI was determined to be 250 fmol for bradykinin (1.1 kDa), 100 fmol for ubiquitin (8.6 kDa), and 500 fmol for carbonic anhydrase (29 kDa). IR-ELDI is amenable for MS and MSn analysis for proteins up to 80 kDa transferrin. IR-ELDI-MS may be a useful tool for protein sequencing analysis from complex biological matrices, with minimal sample preparation required.

Electrospray-Assisted Laser Desorption/Ionization Mass Spectrometry for Continuously Monitoring the States of Ongoing Chemical Reactions in Organic or Aqueous Solution under Ambient Conditions

Electrospray-assisted laser desorption/ionization (ELDI) combined with mass spectrometry allows chemical and biochemical compounds to be characterized directly from hydrophilic and hydrophobic organic solutions mixed with carbon powders under ambient conditions. Organic and inorganic compounds dissolved in polar or nonpolar solvent such as methanol, tetrahydrofuran, ethyl acetate, toluene, dichloromethane, or hexane can be detected using this ambient ionization technique without prior pretreatment. We have used this technique to monitor the progress in several ongoing reactions: the epoxidation of chalcone in ethanol, the chelation of ethylenediaminetetraacetic acid with copper and nickel ions in aqueous solution, the chelation of 1,10-phenanthroline with iron(II) in methanol, and the tryptic digestion of cytochrome c in aqueous solution. Liquid-ELDI analyses simply require irradiation of the surface of the sample solution with a pulsed ultraviolet laser; the laser energy is adsorbed by the carbon powder presuspended in the sample solution; the absorbed laser energy is then transferred to the surrounding solvent and to the analyte molecules in the solution, leading to their desorption; the desorbed gaseous analyte molecules are then postionized within an electrospray (ESI) plume to generate ESI-like analyte ions.

Reactive-Electrospray-Assisted Laser Desorption/Ionization for Characterization of Peptides and Proteins

Electrospray-assisted laser desorption/ionization (ELDI) is a soft ionization method for mass spectrometry (MS) and combines features of both electrospray ionization (ESI) and matrix-assisted laser desorption/ionization to generate ESI-like multiply charged molecules. The ELDI process is based on merging ESI-generated, charged droplets with particles UV laser desorbed from dried or wet sample deposits. We previously reported that ELDI is amenable for MS-based protein identification of large peptides and small proteins using top-down and bottom-up techniques (Peng, I. X.; Shiea, J.; Ogorzalek Loo, R. R.; Loo, J. A. Rapid Commun. Mass Spectrom. 2007, 21, 2541-2546). We have extended our studies by applying collisionally activated dissociation and electron-transfer dissociation MS ( n ) to protein analysis and show that ELDI is capable of multistage MS to MS (4) for top-down characterization of large proteins such as 29 kDa carbonic anhydrase. Multiply charged proteins generated by the ELDI mechanism can be shifted to higher charge by increasing the organic content in the ESI solvent to denature the protein molecules, or by adding m-nitrobenzyl alcohol to the ESI solvent. Furthermore, we introduce "reactive-ELDI", which supports chemical reactions during the ELDI process. Preliminary data for online disulfide bond reduction using dithiothreitol on oxidized glutathione and insulin show reactive-ELDI to be effective. These data provide evidence that the laser-desorbed particles merge with the ESI-generated charge droplets to effect chemical reactions prior to online MS detection. This capability should allow other chemical and enzymatic reactions to be exploited as online protein characterization tools, as well as extending them to flexible, spatially resolved tissue screening and imaging. Also, these reactive-ELDI disulfide reduction experiments enable direct top-down protein identification for proteomic study, side stepping laborious, time-consuming sample preparation steps such as in-solution reduction and alkylation.

Using Electrospray-Assisted Laser Desorption/Ionization Mass Spectrometry To Characterize Organic Compounds Separated on Thin-Layer Chromatography Plates

Electrospray-assisted laser desorption/ionization (ELDI), an ionization method that combines laser desorption and electrospray ionization (ESI), can be used under ambient conditions to characterize organic compounds (including FD&C dyes, amines, extracts of a drug tablet) separated in the central track on a thin-layer chromatography (TLC) plate coated with either reversed-phase C18 particles or normal-phase silica gel. After drying, the TLC plate was placed on an acrylic sample holder set in front of the sampling skimmer of an ion trap mass analyzer. The chemicals at the center of the TLC plate were analyzed by pushing the sample holder into the path of a laser beam with a syringe pump. The molecules in the sample spot were desorbed by continuously irradiating the surface of the TLC plate with a pulsed nitrogen laser. Then, the desorbed sample molecules entered an ESI plume where they were ionized through the reactions with the charged species (including protons, hydronium ions and their cluster ions, solvent ions, and charged droplets) generated by electrospraying a methanol/water solution. MS/MS analyses were also performed to further characterize the analytes. The detection limit of TLC/ELDI/MS is approximately 10(-6) M. This was evaluated by using FD&C red dye as the standard. A linear relationship was found for the calibration curve with the concentration of FD&C red dye ranged from 10(-3) to 10(-6) M.

Electrospray‐assisted laser desorption/ionization and tandem mass spectrometry of peptides and proteins

We have constructed an electrospray-assisted laser desorption/ionization (ELDI) source which utilizes a nitrogen laser pulse to desorb intact molecules from matrix-containing sample solution droplets, followed by electrospray ionization (ESI) post-ionization. The ELDI source is coupled to a quadrupole ion trap mass spectrometer and allows sampling under ambient conditions. Preliminary data showed that ELDI produces ESI-like multiply charged peptides and proteins up to 29 kDa carbonic anhydrase and 66 kDa bovine albumin from single-protein solutions, as well as from complex digest mixtures. The generated multiply charged polypeptides enable efficient tandem mass spectrometric (MS/MS)-based peptide sequencing. ELDI-MS/MS of protein digests and small intact proteins was performed both by collisionally activated dissociation (CAD) and by nozzle-skimmer dissociation (NSD). ELDI-MS/MS may be a useful tool for protein sequencing analysis and top-down proteomics study, and may complement matrix-assisted laser desorption/ionization (MALDI)-based measurements.

Characterization of the chemical components on the surface of different solids with electrospray‐assisted laser desorption ionization mass spectrometry

In this study we demonstrate that electrospray-assisted laser desorption ionization (ELDI) mass spectrometry (MS) can be used to rapidly characterize major chemical components on the surfaces of different solids under ambient conditions. The major chemical components in (a) dried milks with different fat contents, (b) different color-regions of a painting, (c) the thin coating on a compact disc, (d) drug tablets, and (e) porcine brain tissue were rapidly characterized as protonated molecules [M+H](+) or sodiated molecules [M+Na](+) by ELDI-MS with minimum sample pretreatment. The ionized ions of synthetic polymer and dye standards were detected directly from dried sample solutions using either positive or negative ion mode. Further structural information for the FD&C Red dye was obtained through tandem mass spectrometric (MS/MS) analysis using an ion trap mass analyzer attached to the ELDI source.

Generation and Detection of Multiply-Charged Peptides and Proteins by Matrix-Assisted Laser Desorption Electrospray Ionization (MALDESI) Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

We report the coupling of a hybrid ionization source, matrix-assisted laser desorption electrospray ionization (MALDESI), to a Fourier transform-ion cyclotron resonance mass spectrometer (FT-ICR MS). The details of the source design and initial data are presented. Analysis of peptides and proteins ranging from 1 to 8.6 kDa resulted in high resolving power single-acquisition FT-ICR mass spectra with average charge-states highly correlated to those obtained by nanoESI, thus, providing strong evidence that the ESI process dictates the observed charge-state distribution. Importantly, unlike the recently introduced electrospray assisted laser desorption ionization (ELDI) source reported by Shiea and coworkers [1, 2], the data we have obtained to date rely on the use of an organic acid matrix. The results presented herein provide insight into the charging mechanism of this emerging ionization approach, while also expanding the utility of FT-ICR MS for top-down protein and complex mixture analysis.

Electrospray‐assisted laser desorption/ionization mass spectrometry for direct ambient analysis of solids

A new method of electrospray-assisted laser desorption/ionization (ELDI) mass spectrometry, which combines laser desorption with post-ionization by electrospray, was applied to rapid analysis of solid materials under ambient conditions. Analytes were desorbed from solid metallic and insulating substrata using a pulsed nitrogen laser. Post-ionization produced high-quality mass spectra characteristic of electrospray, including protein multiple charging. For the first time, mass spectra of intact proteins were obtained using laser desorption without adding a matrix. Bovine cytochrome c and an illicit drug containing methaqualone were chosen in this study to demonstrate the applicability of ELDI to the analysis of proteins and synthetic organic compounds.