Electroporation Method Research Articles

Agarose hydrogel-mediated electroporation method for retinal tissue cultured at the air-liquid interface

Agarose hydrogel-mediated electroporation method for retinal tissue cultured at the air-liquid interface

Extract from Falcaria vulgaris loaded with exosomes for the treatment of hypertension in pregnant mice: In vitro and In vivo investigations.

Hypertensive disorders during pregnancy pose significant risks to both maternal and fetal health, necessitating safe and effective therapeutic interventions. This study aimed to investigate the potential of an extract derived from Falcaria vulgaris (FV), loaded with exosomes to form the Exo/FV complex, as a novel therapeutic agent for the management of hypertension in pregnant mice: antioxidants, antimicrobials, and phenolic compounds present in FV lower blood pressure. The isolation of exosomes was done by ultracentrifugation methods and the FV was loaded into the exosomes by electroporation method. The Exo/FV was found to be spherical with diameter ranges from 20 to 30nm and they were tested for biocompatibility in NHI 3T3 cell lines and found to be effective. This research investigated invivo hypertension in mice induced by L-NAME and treated with FV and Exo/FV and found that AChE and MAO determine mice's redox state tends to reduce blood pressure. Increased non-protein thiol (NP-SH) and decreased lipid peroxidation were also found, and PDE-5, ACE, Arginase, and MDA activity has also been tested. This analysis showed that Exo/FV effectively treated hypertension during pregnancy.

Porous Substrate-Based Electroporation with Transepithelial Electrical Impedance Monitoring.

Porous substrate electroporation (PSEP) is an emerging method of electroporation that provides high throughput and consistent delivery. Like many other types of intracellular delivery, PSEP relies heavily on fluorescent markers and fluorescent microscopy to determine successful delivery. To gain insight into the intermediate steps of the electroporation process, a PSEP platform with integrated transepithelial electrical impedance (TEEI) monitoring was developed. Cells are cultured in commercially available inserts with porous membranes. After a 12 h incubation period to allow for the formation of a fully confluent cell monolayer, the inserts are placed in transfection media located in the wells of the PSEP device. The cell monolayers are then subjected to a user-defined waveform, and delivery efficiency is confirmed through fluorescent microscopy. This workflow can be significantly enhanced with TEEI measurements between pulsing and fluorescent microscopy to collect additional data on the PSEP process, and this additional TEEI data is correlated with delivery metrics such as delivery efficiency and viability. This article describes a protocol for performing PSEP with TEEI measurements.

Plasmid DNA Delivery into the Skin via Electroporation with a Depot-Type Electrode.

Objectives: Non-viral mediated plasmid DNA transfection by electroporation (EP) is an established method for gene transfection. In this study, the usefulness of direct EP at an intradermal (i.d.) site (DEP) with implanted electrodes to achieve a high protein expression level was investigated. In addition, DEP application with various intervals with a low application voltage was also evaluated to confirm its effect on protein expression. Methods: Green fluorescent protein (GFP)- and luciferase-encoding DNA were administrated, and GFP and luciferase were evaluated. Results: A higher protein expression level was observed after green fluorescent protein (GFP)- and luciferase-encoding DNA were delivered by i.d. injection followed by DEP application. When luciferase expression was observed with an in vivo imaging system, continuous expression was confirmed over 21 days after i.d. injection followed by DEP at 100 V. This approach provided increased gene expression levels compared with conventional EP methods via the stratum corneum layer. In addition, the effect of application voltage on luciferase expression was investigated; two-time applications (repeated DEP) at 20 V with 5 min intervals showed similar luciferase expression level to single DEP application with 100 V. Histological observations showed the skin became thicker after a single DEP at 100 V, whereas no apparent thickness changes were confirmed after repeated DEP at 20 V with 5 min intervals. Conclusions: This study revealed that direct i.d. voltage application achieved high protein expression levels even at low voltages. Skin is a promising administration site for DNA vaccines, so this approach may be effective for DNA vaccine delivery into skin tissue.

Optimization of lipofection protocols for CRISPR/Cas9 delivery in porcine zona pellucida intact oocytes: A study of coincubation duration and reagent efficacy

A priority to facilitate the application of lipofection to generate genetically modified porcine embryos and animals will be the use of zona pellucida (ZP)-intact oocytes and zygotes. Recently, our group produced genetically modified embryos by lipofection of ZP-intact oocytes during in vitro fertilization (IVF). This study investigates the effect of two commercial lipofection reagents, Lipofectamine 3000 and Lipofectamine CRISPRMAX, on embryo development and mutation efficiency in ZP-intact porcine oocytes. We compared these reagents with the electroporation method and a control group using two sgRNAs targeting the CAPN3 and CD163 genes. The detrimental effects on cleavage rates were observed in both lipofection treatments compared to the control and electroporated groups. However, blastocyst rates were higher in the Lipofectamine 3000 group than in the electroporated group for both genes. Mutation parameters varied by target gene, with Lipofectamine 3000 achieving higher mutation rates for CD163, while all groups were similar for the CAPN3 gene. Overall efficiency was similar for both lipofectamines, confirming their feasibility for use. In addition, we evaluated the effect of coincubation time (4, 8, and 24 h) on IVF outcomes, embryo development, and mutation parameters. Results indicated that an 8-h coincubation period optimized fertilization and mutation efficiency without significant toxic effects. This study demonstrates that lipofection with either Lipofectamine 3000 or CRISPRMAX during IVF is an effective method for generating genetically modified porcine embryos without the need for specialized equipment or trained personnel, with efficiencies similar to or greater than electroporation. This study also highlights the importance of optimizing reagent selection and coincubation times. There is no difference between Lipofectamine 3000 and CRISPRMAXTM in terms of embryo development and mutation efficiency, and under our experimental conditions, the optimal coincubation time with lipofectamine is 8 h.

Water Disinfection Via Zinc Oxide (ZnO) Nanowires Chemically Fabricated on A Modified Polyurethane Substrate

Nowadays, water contamination is a big issue due to concerns about health and water scarcity. Unfortunately, most water for human consumption is contaminated with various pathogenic microorganisms that cause water-related diseases. Most traditional chemical and physical disinfectants are energy- and time-intensive and prone to generating harmful disinfection by-products. The recent controversy about waterborne diseases and the safety of commonly used disinfection methods has renewed interest in other forms of disinfection. Low-cost, high-efficiency, and low-energy devices should be developed for potential water disinfection, enabling safe drinking water access. Recently, many researchers have been working on improving the scalability and economics of nanomaterial-based devices to overcome many of the limitations of using traditional anti-microbial agents. Herein, we develop a safe and efficient new nanomaterial decontamination device targeting bacteria in drinking water. Zinc Oxide (ZnO) Nanowires and polyurethane sponges were utilized as affordable and available materials that would lower the cost of the filtration device. The device is based on an electroporation method that applies a low voltage of ~6 V to inactivated bacteria in water. The performance of our device was optimized using different values of voltages, flow rates, microorganism concentrations, and various operation times. By relying on nanotechnology-enabled electroporation principles, this method aims to address the limitations of traditional techniques and offer a feasible solution, especially in areas grappling with contamination issues that lack water treatment infrastructure.

Genome editing using type I-E CRISPR-Cas3 in mice and rat zygotes

The type I CRISPR system has recently emerged as a promising tool, especially for large-scale genomic modification, but its application to generate model animals by editing zygotes had not been established. In this study, we demonstrate genome editing in zygotes using the type I-E CRISPR-Cas3 system, which efficiently generates deletions of several thousand base pairs at targeted loci in mice with 40%-70% editing efficiency without off-target mutations. To overcome the difficulties associated with detecting the variable deletions, we used a newly long-read sequencing-based multiplex genotyping approach. Demonstrating remarkable versatility, our Cas3-based technique was successfully extended to rats as well as mice, even by zygote electroporation methods. Knockin for SNP exchange and genomic replacement with a donor plasmid were also achieved in mice. This pioneering work with the type I CRISPR zygote editing system offers increased flexibility and broader applications in genetic engineering across different species.

Improved low-invasive mRNA electroporation method into immature mouse oocytes visualizes protein dynamics during development†.

One of the major causes of oocyte quality deterioration, chromosome segregation abnormalities manifest mainly during meiosis I, which occurs before and during ovulation. However, currently, there is a technical limitation in the introduction of mRNA into premature oocytes without impairing embryonic developmental ability. In this study, we established a low-invasive electroporation (EP) method to introduce mRNA into pre-ovulatory, germinal vesicle (GV) mouse oocytes in an easier manner than the traditional microinjection method. The EP method with an optimized impedance value resulted in the efficient introduction of mRNAs encoding enhanced green fluorescent protein (EGFP) into the GV oocytes surrounded by cumulus cells at a survival rate of 95.0%. Furthermore, the introduction of histone H2B-EGFP mRNA into the GV oocytes labeled most of the oocytes without affecting the blastocyst development rate, indicating the feasibility of the visualization of oocyte chromosomal dynamics that enable us to assay chromosomal integrity in oocyte maturation and cell count in embryonic development. The establishment of this EP method offers extensive assays to select pre-implantation embryos and enables the surveying of essential factors for mammalian oocyte quality determination.

IRE made easy: introducing the robotic grid system for multiple parallel needle insertion in irreversible electroporation treatment

PurposeAccurate needle placement is crucial for successful tumor treatment using the irreversible electroporation (IRE) method. Multiple needles are inserted around the tumor, ideally in parallel, to achieve uniform electric field distribution. This paper presents a robot utilizing a grid system to enable multiple needles insertion while maintaining parallelism between them.MethodsThe robotic system has two degrees of freedom, which allow for the adjustment of the grid system to accommodate targeting lesions in various positions. The robot’s performance was evaluated by testing its accuracy across various configurations and target depth locations, as well as its ability to maintain the needle parallelism.ResultsThe robot has dimensions of ϕ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\phi }$$\\end{document} 134 mm and a height of 46 mm, with a total weight of 295 g. The system accuracy test showed that the robot can precisely target points across different target depths and needle orientations, with an average error of 2.71±0.68\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$2.71\\pm 0.68$$\\end{document} mm. Moreover, multiple insertions at different grid locations reveal needle orientation deviations typically below 1∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$1^{\\circ }$$\\end{document}.ConclusionThis study presented the design and validation of a robotic grid system. The robot is capable of maintaining insertion accuracy and needle parallelism during multiple needle insertions at various robot configurations. The robot showed promising results with limited needle deviation, making it suitable for IRE procedures.

An efficient low cost means of biophysical gene transfection in primary cells

Efficient, facile gene modification of cells has become an indispensable part of modern molecular biology. For the majority of cell lines and several primary populations, such modifications can be readily performed through a variety of methods. However, many primary cell lines such as stem cells frequently suffer from poor transfection efficiency. Though several physical approaches have been introduced to circumvent these issues, they often require expensive/specialized equipment and/or consumables, utilize substantial cell numbers and often still suffer from poor efficiency. Viral methods are capable of transducing difficult cellular populations, however such methods can be time consuming for large arrays of gene targets, present biohazard concerns, and result in expression of viral proteins; issues of concern for certain experimental approaches. We report here a widely applicable, low-cost (< $100 CAD) method of electroporation, applicable to small (1–10 μl) cell volumes and composed of equipment readily available to the average investigator. Using this system we observe a sixfold increase in transfection efficiency in embryonic stem cell lines compared to commercial devices. Due to efficiency gains and reductions in volume and applied voltage, this process improves the survival of sensitive stem cell populations while reducing reagent requirements for protocols such as Cas9/gRNAs transfections.

Optimization of electroporation method and promoter evaluation for type-1 methanotroph, Methylotuvimicrobium alcaliphilum.

Methanotrophic bacteria are promising hosts for methane bioconversion to biochemicals or bioproducts. However, due to limitations associated with long genetic manipulation timelines and, lack of choice in genetic tools required for strain engineering, methanotrophs are currently not employed for bioconversion technologies. In this study, a rapid and reproducible electroporation protocol is developed for type 1 methanotroph, Methylotuvimicrobium alcaliphilum using common laboratory solutions, analyzing optimal electroshock voltages and post-shock cell recovery time. Successful reproducibility of the developed method was achieved when different replicative plasmids were assessed on lab adapted vs. wild-type M. alcaliphilum strains (DASS vs. DSM19304). Overall, a ∼ 3-fold decrease in time is reported with use of electroporation protocol developed here, compared to conjugation, which is the traditionally employed approach. Additionally, an inducible (3-methyl benzoate) and a constitutive (sucrose phosphate synthase) promoter is characterized for their strength in driving gene expression.

Optimized plasmid loading of human erythrocytes for Plasmodium falciparum DNA transfections

In vitro modification of Plasmodium falciparum genes is the cornerstone of basic and translational malaria research. Achieved through DNA transfection, these modifications may entail altering protein sequence or abundance. Such experiments are critical for defining the molecular mechanisms of key parasite phenotypes and for validation of drug and vaccine targets. Despite its importance, successful transfection remains difficult and is a resource-intensive, rate-limiting step in P. falciparum research. Here, we report that inefficient loading of plasmid into erythrocytes limits transfection efficacy with commonly used electroporation methods. As these methods also require expensive instrumentation and consumables that are not broadly available, we explored a simpler method based on plasmid loading through hypotonic lysis and resealing of erythrocytes. We used parasite expression of a sensitive NanoLuc reporter for rapid evaluation and optimization of each step. Hypotonic buffer composition, resealing buffer volume and composition, and subsequent incubation affected plasmid retention and successful transfection. While ATP was critical for erythrocyte resealing, addition of Ca++ or glutathione did not improve transfection efficiency, with increasing Ca++ concentrations proving detrimental to outcomes. Compared with either the standard electroporation method or a previously reported hypotonic loading protocol, the optimized method yields greater plasmid loading and higher expression of the NanoLuc reporter 48 h after transfection. It also produced significantly faster outgrowth of parasites in transfections utilizing either episomal expression or CRISPR-Cas9 mediated integration. This new method produces higher P. falciparum transfection efficiency, reduces resource requirements and should accelerate molecular studies of malaria drug and vaccine targets.

Silencing of Resistance Mechanism in Vancomycin-Resistance Enterococci Using Antisense RNA of vanA Gene

The World Health Organization has included the problem of antibiotic resistance among the top 10 important health problems in the world. Treatment of infectious diseases has become more difficult due to the spread of antibiotic resistance between bacteria via transposable elements. Vancomycin-resistant enterococci (VRE) are of critical medical and public health importance due to their association with serious nosocomial infections and high risk of death. One of the most important features of VREs is that they have multiple antibiotic resistance and treatment options are reduced. Therefore, new treatment methods are needed. The vanA gene constitutes the building block of the vancomycin resistance mechanism and causes high resistance to vancomycin. In this study, it was aimed to investigate the neutralization of the vancomycin resistance mechanism by creating vanA antisense RNA (asRNA). The vanA positive VRE50 strain in our culture collection which was isolated from the clinical sample, was used to amplify the vanA gene by polymerase chain reaction (PCR). The amplified vanA amplicon was inserted inversely into the pUC19 plasmid by means of the enzyme cutting sites in the primers used. The resulting plasmid was combined with the pAT392 plasmid which can replicate in gram-positive bacteria and a fusion plasmid was created. The fusion plasmid whose orientation was confirmed, was transferred to the wild strain VRE50 by electroporation method. Minimum inhibitory concentration (MIC) values of transformed VRE (tVRE50) and wild type VRE50 strains used as control were determined by the E-Test method. The vancomycin MIC value of the wild type VRE50 strain was determined as 1024 µg/mL and that of the tVRE50 strain was 32 µg/mL and it was determined that the vancomycin resistance of the tVRE50 strain decreased with asRNA (antisense RNA). Antisense RNA technology is an important method for neutralizing the expression of genes. This study showed that neutralization of the vancomycin resistance gene may provide a lower MIC value in a vancomycin-resistant enterococcus strain and lead to increased susceptibility. This new approach provides a new method for VRE treatment by neutralizing the vancomycin resistance mechanism. The result obtained in this study needs to be supported by in vivo tests.

Establishment of an optimized electroporation method for Halomonas sp. YK44 and its application in the coproduction of PHB and isobutanol

Establishment of an optimized electroporation method for Halomonas sp. YK44 and its application in the coproduction of PHB and isobutanol

Novel electroporation-based genome editing of carnation plant tissues using RNPs targeting the anthocyanidin synthase gene.

A novel electroporation method for genome editing was performed using plant tissue samples by direct RNPs-introduction in carnation. Genome editing is becoming a very useful tool in plant breeding. In this study, a novel electroporation method was performed for genome editing using plant tissue samples. The objective was to create a flower color mutant using the pink-flowered carnation 'Kane Ainou 1-go'. For this purpose, a ribonucleoprotein consisting of guide RNA and clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9 (Cas9) was introduced into the stem tissue to induce mutations in the anthocyanidin synthase (ANS) gene, which is involved in anthocyanin biosynthesis. As the ANS of 'Kane Ainou 1-go' has not been previously isolated, we initially isolated the ANS gene from 'Kane Ainou 1-go' for characterization. Southern hybridization analysis confirmed that the ANS gene was present in the genome as a two-allele gene with a pair of homologous sequences (ANS-1 and 2); these sequences were used as the target for genome editing. Genome editing was performed by introducing #2_single-guide RNA into the stem tissue using the ribonucleoprotein. This molecule was used because it exhibited the highest efficiency in an analysis of cleavage activity against the target sequence in vitro. Cleaved amplified polymorphic sequence analysis of genomic DNA extracted from 85 regenerated individuals after genome editing was performed. The results indicated that mutations in the ANS gene may have been introduced into two lines. Cloning of the ANS gene in these two lines confirmed the introduction of a single nucleotide substitution mutation for ANS-1 in both lines, and a single amino acid substitution in one line. We discussed the possibility of color change by the amino acid substitution, and also the future applications of this technology.

Transepithelial Electrical Impedance Increase Following Porous Substrate Electroporation Enables Label-Free Delivery.

Porous substrate electroporation (PSEP) is a promising new method for intracellular delivery, yet fundamentals of PSEP are not well understood, especially the intermediate processes leading to delivery. PSEP is an electrical method, yet the relationship between PSEP and electrical impedance remains underexplored. In this study, a device capable of measuring impedance and performing PSEP is developed and the changes in transepithelial electrical impedance (TEEI) are monitored. These measurements show TEEI increases following PSEP, unlike other electroporation methods. The authors then demonstrate how cell culture conditions and electrical waveforms influence this response. More importantly, TEEI response features are correlated with viability and delivery efficiency, allowing prediction of outcomes without fluorescent cargo, imaging, or image processing. This label-free delivery also allows improved temporal resolution of transient processes following PSEP, which the authors expect will aid PSEP optimization for new cell types and cargos.

New developments in the treatment of aesthetic problems with electroporation

In the present paper we study the literature and research done by notable researchers, around the science of trans- dermal administration, the most recent scientific developments in enhancing skin permeability using third generation technologies. The purpose of this search is to find the latest transdermal methods through electrically assisted trans- dermal absorption systems to address aesthetic problems, specifically with the electroporation method. Electro- poration allows quick and deep penetration of active ingredients, through the "electropores" promoting the ability to channel ingredients such as vitamins, minerals, amino acids, etc. to the desired point. In this way, effective, targeted, and uniform distribution of the active water-soluble substances of small and high molecular weight is achieved, in deeper layers of the skin tissues. As a result of this whole process, the electroporation method is an additional weapon in our quiver for dealing with and improving aesthetic problems.

Combining total synthesis and genetic engineering to probe dihydropyran formation in ambruticin biosynthesis.

The ambruticins are a family of potent antifungal polyketide derived natural products isolated from the myxobacterium Sorangium cellulosum. Their unusual structures include a trisubstituted cyclopropyl group and two oxygen heterocycles, a tetrahydropyran (THP) and dihydropyran (DHP). Herein we report a flexible modular approach for the total synthesis of ambruticins which is used to prepare ambruticins F and S as well as in the first total synthesis of 20,21-dihydroambruticin F. The flexible strategy unites 3 fragments via Julia-Kocienski olefinations and provides important standards for investigation of dihydropyran formation in ambruticin biosynthesis. Cultures of wild-type S. cellulosum So ce10 produce mainly ambruticin S and the VS series of metabolites. An efficient electroporation method enabled gene knockout experiments which revealed that the ΔambP-S mutant of S. cellulosum accumulated the bisTHP polyketide 20,21-dihydroambruticin F. In contrast, the ΔambN-S mutant gave ambruticin F with the 20,21-alkene as the major metabolite confirming that AmbP and AmbO (a Rieske enzyme and flavin-dependent monooxygenase respectively) are implicated in 20,21-alkene formation. The results of feeding studies to a Sorangium strain containing only ambP and ambO are in accord with formation of the 20,21-alkene occurring prior to generation of the C3 to C7 dihydroxylated tetrahydropyran in ambruticin biosynthesis.

Parallel Resonant Magnetic Field Generator for Biomedical Applications.

In recent years, pulsed magnetic field (PMF) have attracted significant attention as a non-invasive electroporation method in the biomedical field. To further explore the biomedical effects generated by oscillating PMF, we designed a novel PMF generator for biomedical research. Based on resonance principles, the designed generator outputs sinusoidal oscillating PMF. To validate the feasibility and application value of the designed topology, a miniaturized platform was constructed using a selected multi-turn solenoid coil. The output performance of the generator was tested under different discharge voltage levels. The results revealed that the current multiplication factor remained consistently around 2 times, with the energy efficiency and circuit quality factor maintained at 82% and above 4.5, respectively. In addition, the generator's ability to flexibly modulate the number of pulse oscillations was demonstrated. The compatibility of the designed coil parameters and generator circuit parameters was analyzed, with tests on the effects of coil resistance and switch action time on the generator's output performance. Based on the magnetic field action platform, a simulation model of the actual scale coil was established. The spatial and temporal distribution of the magnetic field, induced electric field, and power transmission in the target area were described from multiple angles. Finally, biological experiments conducted using the constructed generator revealed the synergistic effect of sinusoidal oscillating PMF combined with drugs in tumor cell killing.

Isolation and characterisation of promoters from mouse genome to drive post-meiotic germ cell-specific robust gene expression for functional genomics studies

The generation of spermatozoa from developing germ cells through mitotic and meiotic divisions is a highly regulated and complex process. Any defect in this process, may lead to subfertility/infertility. The role of different transcripts (mRNA/miRNA/lncRNA) in regulation of the pre-meiotic, meiotic, and post-meiotic stages of spermatogenesis are being proposed based on various multiomics based approaches. Such differential gene-expression is regulated by promoter elements that are activated in a stage specific manner. To determine the role of these differentially expressed transcripts in the process of meiosis, a robust post-meiotic germ cell specific promoter is required. In the present study, we have isolated and characterized the expression of the mouse Proacrosin, SP10, and ELP promoters for driving post-meiotic germ cell specific gene-expression. Promoter regions of all these 3 genes were isolated and cloned to generate mammalian expression vector. The transgene expression in post-meiotic germ cells was assessed in mice using the testicular electroporation method in vitro as well as in vivo, using above promoters. It was also validated in goat seminiferous tubules, in vitro. We have also carried out a comparative analysis of the strength of these promoters to confirm their robustness that indicated Proacrosin to be the most robust promoter that can be useful for diving post-meiotic germ cells specific gene-expression. These promoters can be used to alter gene-expression specifically in post-meiotic germ cells for deciphering the role(s) of germ cell genes in spermatogenic progression or for expressing various genome editing tools for engineering the germ cell genome to understand basis of subfertility/infertility.