Sodium Dodecyl Sulfate Electrophoresis Research Articles

In-Use Physicochemical Stability of Sandoz Rituximab Biosimilar in 0.9% Sodium Chloride Solution After Prolonged Storage at Room Temperature Conditions.

Often, stability studies do not cover all facets of ensuring patient safety for biologics, unless the impact of the in-use and out-of-fridge conditions is also assessed. This study investigated the physicochemical and biological stability of Sandoz rituximab biosimilar (SDZ-RTX). In a worst-case setting, two SDZ-RTX batches in vials were exposed to long-term conditions (5 ± 3°C) for at least the shelf-life period (36 months). These batches were exposed to out-of-fridge conditions of up to 25 ± 2°C/60 ± 5% relative humidity in total for 14days, and subsequently to 30±2°C/75 ± 5% relative humidity for 7 days. Thereafter, these batches were diluted to 1mg/mL in 0.9% NaCl in 250-mL polyethylene infusion bags and stored at either 25 ± 2°C/60 ± 5% relative humidity for 30 days or 30 ± 2°C/75±5% relative humidity for 14 days, representing in-use conditions. The stability of SDZ-RTX was assessed using a variety of analytical methods, including size-exclusion chromatography, cation exchange chromatography, non-reducing capillary electrophoresis sodium dodecyl sulfate, complement-dependent cytotoxicity-bioactivity, and subvisible particle count by light obscuration. Results for all assessments were within the stringent shelf-life acceptance criteria for SDZ-RTX for both batches under both in-use conditions. These data show that the physicochemical and biological quality of SDZ-RTX diluted in 0.9% NaCl infusion bags is assured, even after prolonged worst-case (out-of-fridge and in-use) storage at elevated temperatures up to 30°C, if the medication is prepared under aseptic conditions according to the Summary of Product Characteristics.

Raman spectroscopy for monitoring free sulfhydryl formation during monoclonal antibody manufacturing

During production, harvested cell culture fluid (HCCF) can degrade due to reductases breaking interchain disulfide bonds, forming low molecular weight (LMW) impurities that contain free sulfhydryl and high molecular weight (HMW) impurities through disulfide shuffling. Thus, detecting and quantifying the free sulfhydryl increase in HCCF is critical. Herein, Raman spectroscopy is implemented as a process analytical technology, and multivariate data analysis is applied to characterize and quantify sulfhydryl formation in HCCF with disulfide-containing indicator molecules. Raman spectra qualitatively probe the presence or absence of disulfide bond breakage in antibodies, consistent with offline non-reduced capillary electrophoresis sodium dodecyl sulfate results. Between two antibodies studied, mAb A was identified for a higher risk of antibody reduction where sulfhydryl formation was observed within 16 h, while mAb B did not show similar concerns even after 1 week. The offline measurement of redox potential is below –100 mV in HCCF for mAb A, while the stable mAb B HCCF shows redox potentials above +20 mV. A multivariate partial least squares (PLS) model for quantification is developed using an offline free sulfhydryl assay, applying Raman spectra to predict free sulfhydryl concentration with high accuracy (R2 > 0.98) and expected mean error of 0.677 mM from the offline Ellman’s Assay. This work confirms the use of Raman PAT to monitor real-time disulfide reduction, enabling improvements to process understanding and product quality.

Characterization workflow for fragments detected in capillary electrophoresis sodium dodecyl sulfate analysis of therapeutic monoclonal antibodies.

Product-related fragments in monoclonal antibodies (mAbs) can have a significant impact on the efficacy and safety of the product. Capillary electrophoresis sodium dodecyl sulfate (CE-SDS) is a commonly used method for fragment quantification, but it has challenges in peak identification due to the inability to enrich components and the incompatibility of SDS with mass spectrometry (MS). This article presents a workflow for identifying peaks in CE-SDS analysis. The workflow involves comparing the migration time of peaks with that of standards and utilizing MS analysis to identify fragments. By employing this innovative systematic workflow, we successfully identified the CE-SDS impurity peaks of seven antibody products. Among them, four products exhibited characteristic fragments associated with disulfide bonds (light chain [LC], heavy-light [HL] chain, heavy-heavy [HH] chain, and HH-LC) and a glycosylation-related fragment non-glycosylated heavy chain. Additionally, one product showed a fragment formed by the connection of HC_C130 and HC_C130, which is associated with a thioether bond. Furthermore, two other products displayed amino acid backbone breakage, with one product showing clipping at the HC region of A233-G285 and the other product showing clipping at the HC regions of A97-S158 and N342-T366. This workflow can be applied in early drug research, process development, or during the biologics license application stage to characterize fragments in therapeutic mAbs analyzed by CE-SDS.

Using capillary electrophoresis sodium dodecyl sulfate (CE-SDS) and liquid chromatograph mass spectrometry (LC-MS) to identify glycosylated heavy chain heterogeneity in the anti-VEGFR-2 monoclonal antibody.

The size variant, which can be measured by capillary electrophoresis sodium dodecyl sulfate (CE-SDS), is a critical quality attribute of monoclonal antibodies (mAbs). The CE-SDS size heterogeneity can hardly be identified by tandem mass spectrometry, which is an intractable obstacle of mAb development and quality control across the industry. We analyzed the purity of an anti-vascular endothelial growth factor receptor 2 (VEGFR-2) mAb, an antagonist of the human VEGFR-2, through reduced CE-SDS and observed glycosylated heavy chain heterogeneity. The heterogeneity has potential impact on safety, efficacy, and stability of drugs for clinical use. Therefore, it should be characterized so as to evaluate its potential risk. In order to identify the heterogeneity, we used mass spectrometry to confirm that the molecular size heterogeneity was not due to peptide bond cleavage in the heavy chain. Subsequently, we employed mass-spectrometry-glycosylation profiling and CE-SDS analysis of various glycosidase-treated samples, in addition to the preparation of mAb references with different glycoforms. Ultimately, we demonstrated that the heavy chain heterogeneity was induced by different levels of galactosylation modifications which will potentially impact the efficacy of antibody drugs (i.e., complement-dependent cytotoxicity). In this study, potential risk caused by heavy chain size heterogeneity was evaluated, which addressed the obstacle of mAb development and quality control. Therefore, this study offers a feasible approach for the investigation and identification of heavy chain heterogeneity in reduced CE-SDS, providing a novel strategy for mAb quality control and evaluation.

Multi-channel Deep-UV absorbance measurement setup for multi-capillary electrophoresis with two fiber arrays facing each other

We have developed a simple, compact, and robust eight-channel ultraviolet (UV) absorption detection setup featuring two eight-fiber arrays (an irradiation fiber array and a detection fiber array) whose ends face each other across eight capillaries. UV light of a 220-nm wavelength from a single deuterium lamp is stably and evenly split into eight lights by using a thick homogenizing fiber connected to a fiber bundle with eight thin fibers, which make up the irradiation fiber array. Each capillary is directly irradiated with each UV light emitted from the irradiation fiber array and then each of the UV lights transmitted through the capillaries is collected by each fiber of the detection fiber array without using any other optical devices (e.g., a lens) and is detected by each of the eight photodetectors. This setup achieves simultaneous UV absorption measurement for all eight capillaries with the detection limit of 54 μAU, linear dynamic range of four logs or more, and negligible crosstalk of 0.01% or less. We also implemented an eight-capillary electrophoresis system and simultaneously analyzed eight immunoglobulin G samples, separated by capillary electrophoresis sodium dodecyl sulfate.

Using enhanced development tools offered by analytical Quality by Design to support switching of a quality control method.

Quality by Design (QbD) principles play an increasingly important role in the pharmaceutical industry. Here, we used an analytical QbD (AQbD) approach to develop a capillary electrophoresis sodium dodecyl sulfate under reducing conditions (rCE-SDS), with the aim of replacing SDS-polyacrylamide gel electrophoresis (SDS-PAGE) as release and stability test method for a commercialized monoclonal antibody product. Method development started with defining analytical method performance requirements as part of an analytical target profile, followed by a systematic risk assessment of method input parameters and their relation to defined method outputs. Based on this, design of experiments studies were performed to identify a method operable design region (MODR). The MODR could be leveraged to improve method robustness. In a bridging study, it was demonstrated that the rCE-SDS method is more sensitive than the legacy SDS-PAGE method, and a conversion factor could be established to compensate for an off-set due to the higher sensitivity, without losing the correlation to the historical data acquired with the former method. Overall, systematic application of analytical Quality by Design principles for designing and developing a new analytical method helped to elucidate the complex dependency of method outputs on its input parameters. The link of the method to product quality attributes and the definition of method performance requirements were found to be most relevant for derisking the analytical method switch, regarding impact on the control strategy.

Boosting the Separation of Adeno-Associated Virus Capsid Proteins by Liquid Chromatography and Capillary Electrophoresis Approaches.

The purity of the three capsid proteins that make up recombinant adeno-associated virus (rAAV) is considered a critical quality attribute of gene therapy products. As such, there is a clear need to develop separation methods capable of rapidly characterizing these three viral proteins (VPs). In this study, the potential benefits and limitations of different electrophoretic and chromatographic methods were evaluated, including capillary electrophoresis-sodium dodecyl sulfate (CE-SDS), reversed phase liquid chromatography (RPLC), hydrophilic interaction chromatography (HILIC), and hydrophobic interaction chromatography (HIC), for the analysis of VPs obtained from different serotypes (i.e., AAV2, AAV5, AAV8, and AAV9). CE-SDS is considered to be the reference method and provides a suitable separation of VP1-3 proteins using generic conditions and laser induced fluorescence detection. However, the characterization of post-translational modifications (i.e., phosphorylation, oxidation) remains difficult, and species identification is almost impossible due to the lack of compatibility between CE-SDS and mass spectrometry (MS). In contrast, RPLC and HILIC were found to be less generic than CE-SDS and require tedious optimization of the gradient conditions for each AAV serotype. However, these two chromatographic approaches are inherently compatible with MS, and were shown to be particularly sensitive in detecting capsid protein variants resulting from different post-translational modifications. Finally, despite being non-denaturing, HIC offers disappointing performance for viral capsid proteins characterization.

Salivary Protein and Electrolyte Profiles during Primary Teeth Eruption: A Cross-Sectional Study.

This study aimed to assess the qualitative changes in the saliva during the process of primary teeth eruption. This cross-sectional study was conducted on 147 children from 2 to 48 months, of which 49 were in group A (no erupted primary teeth), 53 were in group B (at least one active erupting primary tooth), and 45 were in group C (eruption of all 20 primary teeth was completed). Salivary proteins were evaluated by sodium dodecyl sulfate electrophoresis with polyacrylamide gel, while the concentrations of salivary sodium, potassium, chloride, and calcium ions were evaluated by ion selective electrodes. The data were analyzed using ANOVA and Bonferroni tests (alpha = 0.05). The concentration of proteins with molecular weights of 20-30 KDa was significantly higher in group A, and it gradually decreased with age. The concentration of proteins with molecular weights of 50-60 KDa in group B was significantly lower than those of groups A and C. The calcium ion concentration in group A was significantly higher than that of the other groups. The concentration of potassium ions was minimal in group C. The proteins and electrolyte profiles of the subjects' saliva changed in the process of primary tooth eruption. The highest concentrations of proteins such as statherin, histatin, P-B peptide, and cystatin and the lowest concentrations of proteins such as amylase were present in group B.

Characterization of light chain c-terminal extension sequence variant in one bispecific antibody.

Protein modifications such as post-translational modifications (PTMs) and sequence variants (SVs) occur frequently during protein biosynthesis and have received great attention by biopharma industry and regulatory agencies. In this study, an aberrant peak near light chain (LC) was observed in the non-reduced capillary electrophoresis sodium dodecyl sulfate (nrCE-SDS) electrophoretogram during cell line development of one bispecific antibody (BsAb) product, and the detected mass was about 944 Da higher than LC. The corresponding peak was then enriched by denaturing size-exclusion chromatography (SEC-HPLC) and further characterized by nrCE-SDS and peptide mapping analyses. De novo mass spectra/mass spectra (MS/MS) analysis revealed that the aberrant peak was LC related sequence variant, with the truncated C-terminal sequence “SFNR” (“GEC”deleted) linked with downstream SV40 promotor sequence “EAEAASASELFQ”. The unusual sequence was further confirmed by comparing with the direct synthetic peptide “SFNREAEAASASELFQ”. It was demonstrated by mRNA sequencing of the cell pool that the sequence variant was caused by aberrant splicing at the transcription step. The prepared product containing this extension variant maintained well-folded structure and good functional properties though the LC/Heavy chain (HC) inter-chain disulfide was not formed. Several control strategies to mitigate the risk of this LC related sequence variant were also proposed.

Investigation of an Uncommon Artifact during Reducing Capillary Electrophoresis-Sodium Dodecyl Sulfate Analysis of a Monoclonal Antibody with Dynamic Light Scattering and Reversed Phase High-Performance Liquid Chromatography.

In reducing capillary electrophoresis sodium dodecyl sulfate (CE-SDS) analysis of a monoclonal antibody (mAb-1), the peak area ratio of heavy chain (HC) to light chain (LC) was out of balance, while multiple artifact peaks were observed following the migration of HC. The main purposes of this study were to describe the techniques utilized to eliminate this artifact and clarify the root cause for this interesting phenomenon. We optimized the CE-SDS analysis of mAb-1 by a vairety of techniques including changing the concentration of protein or replacing SDS with a more hydrophobic surfactant (i.e., sodium hexadecyl sulfate (SHS) or sodium tetradecyl sulfate (STS) instead of SDS) in sample and/or the sieving gel buffer. Dynamic light scattering (DLS) and reversed phase high-performance liquid chromatography (RP-HPLC) were used to study the protein-surfactant complex. The artifact could be partially mitigated by reducing the protein concentration and replacing SDS with SHS or STS in the sample and/or the sieving gel buffer solutions. Due to replacing a more hydrophobic surfactant, the HC-surfactant complex formed was more resistant to dissociation, preventing additional hydrophobic HC-HC interaction and aggregation, thus eliminating the artifact problem. DLS and RP-HPLC are powerful supplementary techniques in characterizing the protein-surfactant complex, and hydrophobic surfactants such as SHS and STS could afford more normal electropherograms during the analysis of mAbs.

Characterization of Grinding-Induced Subvisible Particles and Free Radicals in a Freeze-Dried Monoclonal Antibody Formulation.

The primary objectives of this study were to investigate the degradation mechanisms of freeze-dried monoclonal antibody (mAb) formulations under mechanical grinding, assess the sensitivity and suitability of various particle analysis techniques, analyze the structure of the collected subvisible particles (SbVPs), and analyze the antioxidant mechanism of methionine (Met) under degradation process to gain a thorough understanding of the phenomenon. The freeze-dried mAb-X formulations underwent grinding, and the resultant SbVPs were characterized through visual inspection, flow imaging microscopy, dynamic light scattering, ultraviolet-visible spectroscopy, and size-exclusion high-performance liquid chromatography. We further evaluated the effect of different temperatures and the free radical scavenger Met on SbVP formation. The produced free radicals were detected using electron paramagnetic resonance, and Met S-oxide formation was detected using liquid chromatography-mass spectrometry. In addition, we analyzed the obtained SbVPs using capillary electrophoresis sodium dodecyl sulfate and Fourier transform infrared spectroscopy. Grinding leads to SbVP formation under high temperature and free radical formation. Free radicals produced during grinding require the participation of a macromolecule. Met could then bind to the produced free radicals, thus partially protecting mAb-X from degradation while itself undergoing oxidation to form Met(O). Sensitivity differences between different particle analysis techniques were evaluated, and the obtained SbVPs showed significant changes in secondary structure and the formation of covalent aggregates and fragments. Met plays the role of an antioxidant in protecting macromolecules by quenching the free radicals produced during grinding. To thoroughly characterize SbVPs, multiple and orthogonal particle analysis techniques should be used, and if necessary, SbVPs should be processed by enrichment to accurately analyze primary and high order structures.

Combination of strong anion exchange liquid chromatography with microchip capillary electrophoresis sodium dodecyl sulfate for rapid two-dimensional separations of complex protein mixtures

Two-dimensional separations provide a simple way to increase the resolution and peak capacity of complex protein separations. The feasibility of a recently developed instrumental approach for two-dimensional separations of proteins was evaluated. The approach is based on the general principle of two-dimensional gel electrophoresis. In the first dimension, semi-preparative strong anion exchange high-performance liquid chromatography is utilized and fractions are collected by means of a fraction collector. They are subsequently analyzed in the second dimension with microchip capillary electrophoresis sodium dodecyl sulfate. Microchip capillary electrophoresis provides the necessary speed (approximately 1 min/fraction) for short analysis. In this study, three different samples were investigated. Different constructs of soluble guanylyl cyclase were expressed in Sf9-cells using the baculovirus expression system. Cell lysates were analyzed and the resulting separations were compared. In our experimental setup, the soluble guanylyl cyclase was identified among hundreds of other proteins in these cell lysates, indicating its potential for screening, process control, or analysis. The results were validated by immunoblotting. Samples from Chinese hamster ovary cell culture before and after a purification step were investigated and approximately 9% less impurities could be observed. The separation patterns obtained for human plasma are closely similar to patterns obtained with two-dimensional gel electrophoresis and a total of 218 peaks could be observed. Overall, the approach was well applicable to all samples and, based on these results, further directions for improvements were identified.Graphical abstract.

Effects of Electron Beam Irradiation on Acaricide-Resistant and Susceptible Strains of Tetranychusurticae (Acari: Tetranychidae)

The objective of our study was to compare the effects of electron beam irradiation on the development and reproduction of Tetranychus urticae strains that were susceptible or resistant to acequinocyl, bifenazate, and etoxazole. Electron beam irradiation (50–400 Gy) was applied to T. urticae eggs, nymphs, and adults, after which the hatching rate, the emergence rate, longevity, and fecundity were analyzed. Eggs of all the T. urticae strains were irradiated with 150 Gy, and none of them hatched. When protonymphs were irradiated with 300 Gy, oviposition and thus F1 hatchability in newly emerged adults were completely suppressed. The F1 hatching rate of irradiated adults began to markedly decrease with a dose of 200 Gy, and all strains experienced 100% inhibition at a dose of 400 Gy. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (Sodium dodecyl sulfate polyacrylamide gel electrophoresis) showed substantial reductions in the levels of a 50 kDa protein in the susceptible and three resistant strains of T. urticae after irradiation with 400 Gy. These results indicate that a dose of 400 Gy was required to inhibit the normal development and reproduction of T. urticae, and susceptible and acaricide-resistant strains of T. urticae had identical radiosensitivities.

Interlaboratory method validation of capillary electrophoresis sodium dodecyl sulfate (CE-SDS) methodology for analysis of mAbs.

Capillary electrophoresis sodium dodecyl sulfate (CE-SDS) is an analytical method to assess the purity of proteins, commonly applied to monoclonal antibodies (mAbs) in the biopharmaceutical industry. To address the need to standardize the CE-SDS method in the pharmaceutical industry and to enhance the confidence in method transfer between laboratories operating different commercial capillary electrophoresis (CE) instrument platforms, an interlaboratory CE-SDS method validation was organized involving 13 laboratories in 13 companies on four different types of commercial capillary electrophoresis instruments. In the validation, a commercial mAb therapeutic was used as the sample. The validation process followed the analytical guidelines set by the ICH guidelines (International Conference for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use). The method's precision, accuracy, linearity and range, and limit of quantitation (LOQ) were validated in the study. Variations of all the parameters validated in the study passed the pre-set criteria defined at the beginning of the study. The definition was based on previously published works and the intended application purpose of the CE-SDS method for mAbs. The study proved that the CE-SDS method fits its intended application purpose as a size impurity assay and size heterogeneity characterization assay for mAb therapeutic products. This study is the first time a CE-SDS method is validated by multiple laboratories using different commercial CE instrument platforms and on a commercial mAb therapeutic. Its results will enhance the confidence of the biopharmaceutical industry to develop CE-SDS methods and transfer CE-SDS methods between different laboratories.

Characterization and Monitoring of a Novel Light-heavy-light Chain Mispair in a Therapeutic Bispecific Antibody.

Site-specific cysteine engineering, along with other genetic mutations, is broadly implemented in bispecific antibodies (bsAb). Thus far, homodimer, half hole antibody, one-light chain mispaired and light chain swapped variants have been reported as chain-pairing variants for the asymmetric IgG-like bispecific antibodies. Here we report a novel mispair in which the CH3 engineered cysteine on the hole heavy chain (HC) of a knob-into-hole (KiH) bsAb is linked to the engineered cysteine in CL through a disulfide bond, forming a LHL species in a bsAb construct. Due to its impact on bioactivity, it is critical to implement an analytical strategy to monitor this CQA and mitigate risk for the future products. A set of orthogonal physicochemical assays that include hydrophobic interaction chromatography (HIC), capillary electrophoresis sodium dodecyl sulfate (CE-SDS), reverse phase liquid chromatography ultra-performance chromatography mass spectrometry (RP-UPLC MS) and disulfide bond mapping have been utilized to monitor and characterize this chain-pairing impurity for manufacturing process control and product release. Our data shows the LHL mispair in condition medium (CM) is approximately 1.3 - 1.9%. LambdaFabSelect affinity chromatography removes two major chain-pairing variants in CM - i.e. the hole-hole homodimer and hole half-antibody, while retaining the LHL species. Process improvement in Capto Q (anion exchange) and HS50 (cation exchange) chromatography steps removes LHL to as low as 0.2% in the final product. We have demonstrated an orthogonal analytical methodology that is capable of characterizing and monitoring bsAb mispairing, suitable for use in manufacturing process control and product release, and can be potentially implemented for similar bsAb constructs with engineered disulfide bonds.

Serum complement C3 and α2-macroglobulin are potentially useful biomarkers for inflammatory bowel disease patients

AimsUlcerative colitis (UC), characterized by chronic inflammation and its recurrence in the large intestine, is well known as inflammatory bowel disease (IBD). Suitable biomarkers specific for UC are poorly understood till date. We aimed to discover novel serum biomarkers for UC and identify good indicators that reflected the severity of UC. Main methodsSerum samples were obtained from out-patients with IBD (n = 101) and healthy volunteers (HVs, n = 101). Serum proteins were subjected to high performance liquid chromatography (HPLC) and sodium dodecyl sulfate-electrophoresis (SDS-PAGE) analysis. After electrophoresis, proteins in the gel were identified by mass spectrometry. Further, the protein concentration was measured by enzyme-linked immunosorbent assays (ELISAs). Based on the results, correlations between the serum levels of these proteins and the disease activity index scores for UC were statistically evaluated. Principal findingsHPLC showed that chromatograms of serum proteins from HVs apparently differed from those of patients with IBD. Eleven protein bands, which were different in their protein concentrations from those in HVs, were separated by SDS-PAGE accordingly. Among them, complement C3 (c-C3) and α2-macroglobulin (α2-MG), with high protein scores, were identified by mass spectrometry. The serum concentration of c-C3 in patients with IBD was higher than that in HVs. However, the level of α2-MG in patients with IBD was significantly lower than that in HVs. Hence, the serum levels of c-C3 and α2-MG could be good indicators of the severity of UC. ConclusionSerum c-C3 and α2-MG are suitable biomarkers for monitoring the condition of patients with UC.

Evaluating the effect of cooking temperature and time on collagen characteristics and the texture of hog maw.

This study evaluated the texture of hog maw and the degradation of Types I and III collagen in the intramuscular connective tissue (IMCT) of hog maw at different cooking temperatures (75-95°C) and times (50-130 min). The cooking loss, shear force, collagen content, collagen solubility, and IMCT strength of hog maw cooked in water baths were measured. The instrumental texture profile analysis showed that the brittleness, springiness, chewiness and hardness of the cooked hog maw significantly increased with the increase of cooking temperature, while the hardness, springiness and chewiness increased first and then decreased with increasing cooking time. Cooking loss exhibited a 38% increase between the raw meat and meat cooked at 95°C. The collagen solubility significantly increased from 5.5 mg/g for raw meat to 8.6 mg/g for meat cooked at 95°C, accompanied by decreases in the shear force and IMCT strength associated with the increase in cooking temperature and time. These results show that the texture and collagen characteristics of hog maw are dramatically affected by the cooking temperature and time. Sodium dodecyl sulfate electrophoresis and immunofluorescence staining further showed that collagen degradation occurred after cooking, and the degradation of Type I collagen was higher than that of Type III collagen. These results indicated that the degradation of Type I collagen was mainly responsible for the sensory and textural improvements of the cooked hog maw.

Using differential scanning calorimetry for the development of non-reduced capillary electrophoresis sodium dodecyl sulfate methods for monoclonal antibodies

Analysis of non-reduced and reduced monoclonal antibodies (mAbs) by capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) is routinely used to detect product size variants and process-related impurities. Levels of high molecular weight (HMW) forms obtained from this method usually trend comparably to those obtained by orthogonal methods such as size-exclusion ultra-high performance liquid chromatography (SE-UHPLC). However, in the presented case study, comparison of CE-SDS data for three IgG1 mAbs (trastuzumab, mAb1, and mAb2) showed a discrepancy between amounts of observed HMW forms in mAb2 compared with its native forms determined by SE-UHPLC (~17% vs. ~0.5%, respectively).SDS chemical denaturation, as measured by differential scanning calorimetry, demonstrated that the high thermal stability of mAb2 caused an unidentified HMW peak observed by non-reduced (NR)-CE-SDS, which was the result of improper denaturing, resulting in a partially folded species. More so, this strategy enabled the rapid identification of optimal SDS concentration and temperature conditions needed for suitable denaturation for mAb2. This case study presents an alternative option for quick optimization of NR-CE-SDS methods when characterizing mAbs or other thermally stable proteins. Also, this strategy can be used to understand basic biophysical mechanisms of protein unfolding and investigate the higher-order structure imparted by specific sequences and understand how these sequences might affect the results of an analytical method such as CE-SDS.

Characterization and elimination of artificial non-covalent light Chain dimers in reduced CE-SDS analysis of pertuzumab

Capillary electrophoresis sodium dodecyl sulfate (CE-SDS), either in reduced (rCE-SDS) or non-reduced (nrCE-SDS) form, is widely used for purity evaluation and impurity analysis of monoclonal antibody (mAb) drugs. The accuracy of the method may be interfered by artificial species resulted from sample preparation or electrophoresis operation if it is not well optimized. In a routine analysis of pertuzumab for both innovator Perjeta® and biosimilar HLX11 samples, a cluster of unknown peaks located between light chain (LC) and heavy chain (HC) were observed in rCE-SDS and making the purity of (LC + HC)% unacceptable. They can hardly be reduced by regular method optimization such as changing buffer pH, denaturing temperature or incubation time to achieve the (LC + HC)% expectation. Here, the peaks are first characterized and determined to be non-covalently formed LC-LC dimers by multiple techniques including reversed-phase liquid chromatography-mass spectrometry (LC–MS). These artifacts are then eliminated through enhancing capillary separation temperature to 60 °C and decreasing the separation voltage to 9.5 kV, an unusual CE-SDS operation setting. Finally, a developed rCE-SDS method is presented for successful evaluation of pertuzumab purity and impurities, which is further confirmed by an alternative reduced microchip-based gel electrophoresis. In summary, the developed method provided an accurate and reliable purity evaluation and size variant profiling for batch releasing, stability testing and quality study of reduced pertuzumab samples.

Determination of size variants by CE-SDS for approved therapeutic antibodies: Key implications of subclasses and light chain specificities

In the present work, a generic non-reducing capillary electrophoresis sodium dodecyl sulphate (nrCE-SDS) method was tested for a wide range of 26 FDA and EMA approved monoclonal antibodies (mAbs) and 2 antibody drug conjugates (ADCs) as well as for the NISTmab, in a QC environment (e.g. testing quality requirements for batch manufacturing or batch release). This method allows obtaining rapidly and accurately the amount of size variants in drug products within about 40 min and may be used for batch release and consistency as well as for stability and shelf-life. First, the method repeatability was found to be excellent in terms of relative migration times and relative proportions of fragments (average RSD values of 0.3 and 0.2 %, on relative migration times and relative percentages of fragments, respectively), thanks to the addition of an internal standard. A panel of chimeric, humanized and human mAbs were tested, belonging to different subclasses (heavy chain gamma 1, 2, 2/4 and 4) and light chain types (κ or λ) and produced in different cell lines (CHO, NS0 and SP2/0). For all these biopharmaceutical products, the amount of H2L2 species was comprised between 90.9 % and 97.7 %, except for the two mAbs belonging to the IgG1λ subclass, namely avelumab and belimumab, which were prone to partial reduction during the sample preparation at 70 °C. Based on the CE-SDS results obtained for a diverse panel of therapeutic antibodies investigated in this study, and covering a wide range of structural and physico-chemical properties, a specification on the intact antibody content (H2L2) greater than 90 % can be achieved.