Electronic Filter Research Articles

Characterization of probiotic strains of Bacillus sp. from fermented palm wine (Nypa fructicans sp.) and exploration of cellulolytic potential for use as an addition in animal feed.

The main objective of this study was to assess cellulolytic probiotic strains from traditional fermented beverages such as palm wine in order to supplement the animal feed and strengthen the gut health of the animal for better digestibility and absorption. In the present study, different types of microbes were isolated from traditionally prepared palm wine and analyzed for their probiotic nature. For any microbe to be probiotic in nature, it has to sustain the harsh conditions of the human gastrointestinal tract such as acid tolerance, bile tolerance at the lower range of pH, and other properties like auto aggregation test, cell surface hydrophobicity test with non-polar hydrocarbons for evaluating its capabilities to adhere to the intestinal cells and antimicrobial nature against pathogens. Bacillus mycoides strain PR04 and Bacillus subtilis strain PR21 were found to be resistant to acid and bile in simulated artificial gastrointestinal tract model, found to be than 55% hydrophobic with xylene and n-hexadecane and also showed antimicrobial activity greater towards pathogenic strains like Pseudomonas aeruginosa, Staphylococcus aureus, Candida albicans, and Salmonella typhimurium respectively. The cellulolytic activity of the isolates PR04 and PR21 was evaluated in (0.2-2) % CMC (carboxymethyl cellulose) plate. Bacillus mycoides PR04 and Bacillus subtilis PR21 could degrade carboxymethyl cellulose, filter paper, and sugarcane bagasse. The degradation of sugarcane bagasse was confirmed by Scanning electron microscopy and filter paper degradation after 4days of incubation at 37°C. Cellulase gene of the identified Bacillus sp. strains was amplified by primers CF5'-ACAGGATCCGATGAAAACGGTCAATTTCTATTTT-3' and CR5'-ACTCTCGAGATTGGGTTCTGTTCCCAAT-3'. This study proposes potential probiotic Bacillus mycoides PR04 (Accession no. OR625070) and Bacillus subtilis PR21 (Accession no. OR625072) in the application as an animal feed additive to assist in its digestibility and encourage the gut health.

Ultralow-phase-noise and broadband frequency-hopping coupled optoelectronic oscillator under quiet point operation

Advancements in microwave photonics have yielded novel approaches for generating high-purity microwave sources. Among these, optoelectronic oscillators (OEOs) and coupled optoelectronic oscillators (COEOs) have demonstrated the capability to generate frequency-independent microwaves with exceptionally low phase noise. Nonetheless, the tunability of the oscillators is rather limited due to the necessity for narrowband electronic bandpass filters, presenting challenges in achieving both wide and rapid tuning capabilities. Here, we present a COEO featuring ultralow phase noise, flexible tuning capability, and high robustness. This is achieved through a quiet point (QP)-operated harmonic mode-locked fiber laser, which effectively mitigates optical amplifier noise and supermode competition, thus significantly diminishing the necessity for ultra-narrow electronic filters. Due to the liberated tuning ability, we present an oscillator that can be tuned from 2 GHz to 18 GHz, with phase noise as low as −140 dBc/Hz at 10 kHz under the QP operation. We then illustrate the practical application of the proposed oscillator in generating frequency-hopping signals with consistent spurious modes less than −85 dBc, absolute phase noise below −135 dBc/Hz at 10 kHz, hopping resolution of 1.25 MHz, and fractional frequency stability below 6.1×10−12 at 1 s averaging time when locked to a reference. The presented COEO structure emerges as a compelling solution for agile and low-noise microwave sources in advanced wireless communication and radar systems.

Growth, Characterizations of Oxalic Acid Di-Hydrate Crystals of Pure, Milled, Shocked Impact of 50 Scaling for Electronic, Photonic, Display and Sensor Usefulness by Theory and Practice

Oxalic acid dihydrate (OADH) crystal was grown by slow evaporation solution method, milled to micro-OADH, impacted with shocked 50 pulses and harvested in a 16-day period. The 2 MPa pressure with 2.2 Mach number of 864 K temperature specifies the product as shocked 50 scaled OADH. Single crystalline X-ray diffraction of OADH macro are as specified with P21/n as space group with monoclinic as the crystal system and shocked 50 scaled OADH are with lattice constants; the % of elements of OADH specimen are confirmed by theory and practice. The dielectric constant of OADH is higher at lower frequency values by space charge polarization. OADH of all scales are of the negative photo-conductivity type. The influx data of OADH of three types of scaling are identified as better electronic filter. The micro-OADH is confirmed by the scanning electron microscopy analysis as 10 micrometer scaling without any flaws. The Fluorescence (FL) study shows bluish FL emission for all samples of OADH; sensitivity is 8.88>6.6>2.2 for shocked 50-OADH, micro-OADH, macro-OADH. The Miller’s indices of (101) profile for RGB display is shown without as well with recursive colors of OADH.

Synthesis, Studies of Inorganic Class of Mohrite (MOH) Crystals for Electrical, Electronic, Photonic, Phase Matching and Sensor Utilities by Theory and Practice

The high-quality single crystals of Mohrite (MOH) with dimensions 7 × 6 × 3 mm3 were productively grown-up by the customary solution growth methodology. The fully grown crystals were focused to the appropriate structural, optical and electrical investigations. The MOH is monoclinic nature of the specimen with P21/c as the space group and lattice parameters are a as 6.2385 Å, b as 12.6076 Å, c as 9.2655 Å and beta is 106.526°. The crystalline structural authentication with single crystal XRD analysis and compared the same with software based associated results. FITR spectra reveal the vibrational modes of as grown crystals. Optical absorption spectral data divulges that the as-grown crystalline sample has higher optical transparent nature in the visible-NIR region. Photoluminescence intensity is remarkably enriched, shows high crystallinity of MOH. The results of UV, PL, electrical and photo conductivity, SEM, theoretical studies suggest MOH in photonic utility and device appliances especially in UV filters and in electronic filters, room temperature based sensor study for MOH is enabled and reported for red LED based work.

ИСПОЛЬЗОВАНИЕ МАТЕМАТИЧЕСКОГО МОДЕЛИРОВАНИЯ ДЛЯ МНОГОПАРАМЕТРИЧЕСКОГО АНАЛИЗА ЭЛЕКТРОННЫХ СХЕМ С ЛИНЕЙНЫМ АКТИВНЫМ УСТРОЙСТВОМ

It is proposed to use matrix methods for mathematical modeling of the operation of electronic analog linear devices. They allow using computational tools to obtain results with high calculation speed and acceptable accuracy. For example, a scheme of an active second-order electronic filter based on an operational amplifier is proposed. A multiparametric analysis of the transfer function based on the primary parameters of the electronic circuit is proposed. The proposed method for analyzing linear active electronic circuits based on the conduction matrix can significantly reduce the calculation time and significantly simplify the forms of writing analytical expressions. The calculation results are com-pared with the results obtained in a specialized program for modeling electronic circuits OrCAD PSpice. For example, the transfer function is analyzed according to the following parameters: sensi-tivity, statistical synthesis, optimization of tolerances

АНАЛИЗ АНАЛОГОВЫХ АКТИВНЫХ ЭЛЕКТРОННЫХ СХЕМ НА ОСНОВЕ МЕТОДОВ МОДЕЛИРОВАНИЯ

Various classical methods are often used to analyze analog electronic circuits. It is proposed to use matrix methods of mathematical modeling, which allow using computational tools to obtain fast re-sults with acceptable accuracy. As an example, a scheme of an active second-order electronic filter based on an operational amplifier is proposed

WAYS TO REDUCE THE IMPACT OF PULSATIONS IN LOCAL POWER SUPPLY ROBOTIC SYSTEMS

An analysis of the changes in the flow of pulsation transforming the energy-dynamic indicators of on-board power electronics systems has shown that there are several options for solving this problem.
 The article outlines the main options for the current problem of pulsation in the energy systems of autonomous electrical systems, such as UAVs, robotic complexes, and other systems. The effectiveness of changes in pulsation is examined, in addition to directly assessing the effectiveness of stagnation strategies and methods. Also in the statistics, the optimal technical solutions for specific operating minds were identified.
 The prospects and future directives have been predicted based on the proposals for further research in the sphere of changes in pulsation in local life systems.
 In the future, it is predicted and supported by the development of technology and innovation in this country.
 To sum up, we can say that the statistics have analyzed the changes in pulsation in robotic local power supply systems, which is one of the key directions in the field of electrical engineering and electronics. Increased attention to this problem is due to the need for assured stability, reliability and greater energy efficiency of electronic systems. Research in this area is aimed at developing more comprehensive methods and strategies for reducing noise and pulsation in electrical systems.
 Assessing the effectiveness of stagnant methods, promoting the development of new technologies and innovation, as well as developing promising directions in this field opens the way to creating more stable and adaptive living systems. Replacement of advanced electronic filters, voltage stabilizers, selection of new materials and components, integration of intelligent energy management systems and optimization of essential energy resources local power supply systems – the whole purpose is to directly conduct further investigations.
 The growing demand for stable and efficient electronic systems is driven by current research and the introduction of new technologies to change pulsation. Technological developments and scientific research in this area open up broad prospects for reducing the power supply and ensuring the stability of the functioning of modern electronic devices.

Design of Electronic Filter for Noise and Vibration Reduction in Brushed DC Motor

With the recent conversion of internal combustion engines to electric vehicles, new noise issues have arisen, and among them, the noise generated by internal vehicle auxiliary systems is being considered. This study introduces an electronic filter designed with a motor model featuring vibration components, aiming to minimize the noise and vibrations generated by a Brushed DC (BDC) motor commonly employed in vehicle internal systems. It introduces a method to identify the connectors and internal parameters used in the motor for the matching of the model and experimental motor, and to measure and estimate these parameters. The model is separated and executed to ensure convergence, and it is validated by comparing the analysis results with the measured values. A filter is designed using the model to reduce current oscillations in the motor, confirming a subsequent reduction in noise and vibration. This research suggests the potential to attenuate noise and vibration in already produced motors by attaching only a filter without modifying the internal motor structure. Moreover, it is anticipated that a filter can be designed to predict and mitigate the noise and vibration components of the motor based on changes in load.

An Experimental Electronic Board ADF339 for Analog and FPGA-Based Digital Filtration of Measurement Signals

This work introduces and examines a new programmable electronic system, Board ADF339, designed for filtering analog measurement signals of low frequencies. The system operates in a mixed mode in collaboration with a digital controller implemented on the myRIO-1900 FPGA module. It enables the digital selection of the type and frequency settings of the UAF42 integrated circuit. In the technical implementation section, electronic filter and phase shifter circuit diagrams are presented, along with the digital counterpart of the analog filter. Tests of this system were conducted on signals generated using a function generator, which was followed by the filtration of signals occurring in real laboratory setups. A series of real responses from three different laboratory systems and a measurement system utilizing LabVIEW FPGA virtual instruments are demonstrated. After computing SNR indicators for noisy waveforms, the application scope and usability of the board are highlighted.

Growth, theory and practice-based studies of 2,2′,2″-nitrilotris((E)-1-(2-hydroxyphenyl)-N-ethylmethanimine) manganese (III) crystals for electronic filters, opto-electronic functionalities

Growth, theory and practice-based studies of 2,2′,2″-nitrilotris((E)-1-(2-hydroxyphenyl)-N-ethylmethanimine) manganese (III) crystals for electronic filters, opto-electronic functionalities

Transport properties and electron filter in 8-Pmmn borophene superlattice

The energy band structures and transport properties in 8-Pmmn borophene superlattice were investigated. It is found that the Dirac point at other energy appears in the energy band structure and the Dirac cone is tilted. As a function of the incident angle, the transmission probability no longer maintains chiral symmetry. The transmission gaps highly dependent on the widths of the well and barrier of the superlattice. Some forbidden bands appear in the transmission probability with different incident angles, the location and width of the forbidden bands can be regulated by changing the system parameters, which filters the electrons. Modulating the widths of the well and barrier the original Dirac point in superlattice disappears, the minimum value of the conductance at the initial Dirac point was changed into maximum when the widths of the well and barrier of the superlattice were increased to a certain value.

Mitigating EMI Noise in Propagation Paths: Review of Parasitic and Coupling Effects in Power Electronic Packages, Filters, and Systems

Mitigating EMI Noise in Propagation Paths: Review of Parasitic and Coupling Effects in Power Electronic Packages, Filters, and Systems

ПРИМЕНЕНИЕ МАТРИЧНЫХ МЕТОДОВ ДЛЯ АНАЛИЗА И СИНТЕЗА ЭЛЕКТРОННЫХ СХЕМ

It is proposed to use matrix methods and computer technology instead of classical methods for determining objective functions based on the primary parameters of electronic circuits. This approach significantly reduces the time for the analysis and synthesis of electronic circuits and simplifies the forms of writing analytical expressions. The application of the matrix method on the example of a passive electronic low-pass filter is considered. Sensitivity analysis, statistical analysis, tolerance optimization and transient analysis were performed

A Modeling Approach for Designing New Acoustic Materials

In this study, mathematical modeling design based on Sound Transmission Loss measurement results of new acoustic material samples with natural content was carried out. Using the test samples in question, transfer function of acoustic materials based on electronic filter circuit design and a transition design method for the production of new acoustic materials by utilizing the transfer function is presented. Based on the experimental results of the test samples, it is the most suitable low-pass filter structure for the proposed design. In this study, active Sallen-Key low-pass filter structure is preferred and used. Sound Transmission Losses in dB (decibels) of acoustic samples were obtained experimentally for 500, 1000, 2000 and 4000 Hz. fundamental frequencies in the literature. Based on these data, transfer function simulation suppression gain results were obtained in TINA-TI program, active filter circuit designed, and MATLAB program. When the other results were compared in the experimental results, it was seen that very close values were obtained. It has been demonstrated that the proposed method can be used effectively in the design and examination of new acoustic materials.

Gaussian and Gaussian-pulsed-like Fermi velocity graphene structures

Gaussian and Gaussian-related structures are quite attractive due to its versatility to modulate the electronic transport, including its possibility as electron filters. Here, we show that these non-conventional profiles are not the exception when dealing with Fermi velocity barriers in monolayer graphene. In particular, we show that Gaussian Fermi velocity graphene barriers (G-FVGBs) and Gaussian-pulsed-like Fermi velocity graphene superlattices (GPL-FVGSLs) can serve as electron band-pass filters and oscillating conductance structures. We reach this conclusion by theoretically studying the transmission and transport properties of the mentioned structures. The study is based on the continuum model, the transfer matrix method and the Landauer–Büttiker formalism. We find nearly flat transmission bands or pass bands for G-FVGBs modulable through the system parameters. The pass bands improve as the maximum ratio of Fermi velocities () increases, however its omnidirectional range is reduced. These characteristics result in a decaying conductance (integrated transmission) with . The integrated transmission remains practically unaltered with the size of the system due to the saturation of the electron pass band filtering. In the case of GPL-FVGSLs the GPL profile results in regions of high transmission probability that can merge as flat transmission minibands if the pulse fraction and the superlattice parameters are appropriately tuned. The GPL profile also results in conductance (integrated transmission) oscillations that can be multiplied or reduced in number by adjusting the pulse fraction as well as the superlattice parameters.

Synthesis, Characterizations of HDTDHP Macro-Crystals by Experimental-Electrical, Electronic and Computational Structural Proviso for Opto-Electronic and Photonic Utilities

The 7-hydroxy-2,4-dimethoxy-9,10-dihydrophenanthrene-HDTDHP crystal is well-grown within a period of 22 days and is a monoclinic type of system of crystals with space group P21/n. The CHNSO methodology shows the formation of the entitled compound; the HDTDHP is RISE effect type of crystals with the Vicker’s proviso. The surface morphology of HDTDHP crystal is analyzed for macro scale as 200 μm scaling respectively as per SEM study. The higher amount of the dielectric constant at lower frequencies is by the existence of all polarizations; also, the dielectric loss is getting decreased with increase in temperature. The electronic filter use is 3.9987 microns for macro-influx as opto-electronic, extensive NLO type uses; as observed from UV-Visible spectrum from the cut-off and wavelength range of HDTDHP with % transmittance. The frequency doubling and tripling of the macro sample is analyzed in continuation of the Z scan and SHG of the NLO class and confirms the proper electronic functionalities. The HDTDHP crystalline sample is mainly used as photonic-macro level tool, in filters as macro-influx portrayal, in NLO utility as opto-electronic tool by the transmittance data as well as by Z scan and in frequency enhancers and projective use in displays.

Synthesis, physical, chemical, biological, mechanical and electronic studies of polypyrrole (PPy) of versatile scales for electro-mechano, pharmaceutical utilities

The Polypyrrole is properly synthesized with the customary ammonium persulphate as an oxidizing agent. The number of reactions for versatile molar ratios (oxidant: monomer) is addressed and pronounced. Powder X-ray diffraction (XRD) analysis revealed the material amorphous nature by wide peak from 20° to 30°. As the molar ratio is changed, the Fourier Transform Infra Red (FTIR) spectrum shows the substantiation of functional groups and peaks are shifted for each specimen slightly. UV–visible spectral study shows a major peak at 320 nm, for typical π-π* transitions. Scanning Electron Microscopic (SEM) study confirmed the agglomerated polypyrrole sample for the surface morphological periphery. It is enabled for electronic filter influx property with versatile macro scale in microns as 3.7874, Polypyrrole is tried for electronic filters as the influx in microns of different scales. Hardness profile for RISE effectiveness and in the biomedical sector as a better anti-diabetic agent by IC-50 values. The hardness value for Vicker's scale of 100 g is 97.9 kg/mm2.

Impact of Silicon Ion Irradiation on Aluminum Nitride‐Transduced Microelectromechanical Resonators

AbstractMicroelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro‐robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO2) thin film is unveiled. Aluminum nitride on silicon (AlN‐on‐Si) and AlN‐SiO2‐Si bulk acoustic wave (BAW) resonators are designed and fabricated. The devices are irradiated using 2 MeV Si+ ions at various fluxes up to a total fluence of 5 × 1014 cm−2. A time anneal is conducted to characterize device recovery. Scattering (S‐) parameters are measured in situ. Specific damage coefficients are derived to describe the radiation effect on resonant frequency (fr), quality factor (Q), motional resistance (Rm), and electromechanical coupling factor (). Furthermore, the damage coefficients for the bulk material properties of elastic modulus (E) and the piezoelectric coefficient (d31) are found.

Integration of new sets of magnets for improved plasma confinement in the SPIDER experiment

SPIDER is the full-scale prototype of the plasma source of the negative-ion driven neutral beam injector for the heating and current drive of the ITER plasma. The uniqueness and complexity of the system requested this ad hoc test stand aiming at optimizing the performance of the RF inductively generated plasma, negative ion production and extraction, electron filtering, and robustness and controllability of all systems required to work together. After about three years of operation, presently SPIDER is in a long shutdown, in which the whole plasma source and accelerator were dismounted. In this phase, additional modifications with respect to the original design will be introduced to improve the system performance, driven by the experience acquired in the last years.These include the addition of further sets of permanent magnets in the plasma source expansion chamber and around the RF drivers, with the aim of improving the plasma confinement and consequently its density and possibly its uniformity. The present paper reports the study and the analyses behind this modification, which impacts on the original already complex magnetic configuration, made particularly difficult by the limited space available and the high voltages. The use of ferromagnetic shields, necessary to limit stray fields possibly increasing the breakdown probability, make the design particularly complex because of the greater impact on the previous configuration. An iterative process between analyses to determine the ideal configuration and CAD verifications was required. The analyses had to take into account the new magnetic configuration to be created in the particular area of interest, and the overall configuration in order to not compromise its efficacy.

Improving the efficiency of dust collectors and modernization of the aspiration system in cotton cleaning plants

On the basis of MPC of substances in the atmospheric air the values of maximum permissible emissions (MPE) are established, which ensure compliance with hygienic standards in practice. One of the ways to reduce emissions of dust and other pollutants into the atmosphere is the introduction of modern or two-stage equipment for cleaning pollutants. The results of the analysis show that the efficiency of dust extraction at the surveyed enterprises has decreased. It is possible to improve the efficiency of existing dry mechanical dust collectors, i.e., to install additional filters or to install modern electronic filters.