Electronic Effects Of Substituents Research Articles

Electronic Effects in Cobalt Phthalocyanine Catalysts Towards Noble-Metal-Free, Photocatalytic CO2-to-CO Reduction.

Noble-metal-free CO2 reduction systems based on cobalt phthalocyanine (CoPc) and its derivatives have demonstrated remarkable photocatalytic performances; however, their structure-activity relationship with electronic tuning remains unexplored. Herein, we now provide a systematic study to investigate the electron effects of substituents on the CoPc family in photocatalytic CO2 reduction, where a Cu(I) heteroleptic photosensitizer is utilized. The highest performance can be achieved using cobalt tetracarboxylphthalocyanine in light-driven CO2-to-CO reduction, with a maximum turnover number of 2950 at 450 nm and an outstanding apparent quantum yield of 63.5% at 425 nm, over ten times the activity with the tetra-dimethylamino-substituted CoPc derivative. The favorable electron-withdrawing effects have been further verified by DFT calculations and cyclic voltammetry, which reduces the overpotential required for CO2 reduction and decreases the Gibbs free energy of the catalyst active intermediates, particularly the CO-desorption energetics.

Construction of Covalent Triazine Frameworks with Electronic Donor-Acceptor System for Efficient Photocatalytic C-H Hydroxylation of Imidazole[1,2-α]Pyridine Derivatives.

Covalent triazine frameworks (CTFs) are promising heterogeneous photocatalyst candidates owing to their excellent stability, conjugacy, and tunability. In this study, a series of CTFs decorated with different substituents (H, MeO, and F) were synthesised and utilised as photocatalysts for C-H activation reactions. The corresponding optoelectronic properties could be precisely regulated by the electronic effects of different substituents in the nanopore channels of the CTFs; these CTFs were effective photocatalysts for C-H activation in organic synthesis due to their unique structures and optoelectronic properties. Methoxy-substituted CTF (MeO-CTF) exhibited extraordinary catalytic performance and reusability in C-H functionalization by constructing an electronic donor-acceptor system, achieving the highest yield in the photocatalytic C3-H hydroxylation of 2-phenylimidazole[1,2-α]pyridine. This strategy provides a new scaffold for the rational design of CTFs as efficient photocatalysts for organic synthesis.

Rapid Synthesis of Schiff Bases via Pyridine‐2‐Carboxylic Acid as an Effective Catalyst

AbstractThis work focuses on the rapid synthesis of Schiff bases with green protocols, where P2CA (Pyridine‐2‐carboxylic acid) is utilized as a catalyst. The condensation reaction of aldehydes and anilines, facilitated by P2CA, resulted in the production of Schiff bases in good to excellent yield within a remarkably short time of up to 15 min. The electronic effect of the various substituents on aldehyde and aniline, in combination with the catalytic effect of P2CA, accelerated the reactions under mild conditions. The reusability of the catalyst was thoroughly examined, and the catalyst was characterized over every cycle. Importantly, this approach is not only green and sustainable, but also cost‐effective, harmless, and environmentally friendly, thanks to the affordability and benign nature of P2CA.

Mesoporous Vinylene-Linked Covalent Organic Frameworks with Heteroatom-Tuned Crystallinity and Photocatalytic Behaviors.

Owing to its prominent π-delocalization and stability, vinylene linkage holds great merits in the construction of covalent organic frameworks (COFs) with promising semiconducting properties. However, carbon-carbon double bond formation reaction always exhibits relatively low reversibility, unfavorable for the formation of high crystalline frameworks through self-error correction and assembling processes. In this work, we report a heteroatom-tuned strategy to build up a series of two-dimensional (2D) vinylene-linked COFs by Knoevenagel condensation of an electron-deficient methylthiazolyl-based monomer with different triformyl substituted (hetero-)aromatic derivatives. The resulting COFs show high-quality periodic mesoporous structures with high surface areas. Embedding heteroatoms into the backbones enables significantly improving their crystallinity, and finely tailoring their semiconducting structures. Upon visible light stimulation, one of the as-prepared COFs with donor-π-acceptor structure could deliver a nearly seven-fold increase in the catalytic activity of hydrogen generation as compared with the other two. Meanwhile, in combination with high crystallinity and the matched conduction band energy level, such kind of COFs can be able to selectively generate singlet oxygen and superoxide radicals in a high ratio of up to 30:1, allowing for catalyzing aerobic thioanisole oxidation in distinctly tunable activities through the substituent electronic effect of the substrates.

Mesoporous Vinylene‐Linked Covalent Organic Frameworks with Heteroatom‐Tuned Crystallinity and Photocatalytic Behaviors

AbstractOwing to its prominent π‐delocalization and stability, vinylene linkage holds great merits in the construction of covalent organic frameworks (COFs) with promising semiconducting properties. However, carbon‐carbon double bond formation reaction always exhibits relatively low reversibility, unfavorable for the formation of high crystalline frameworks through self‐error correction and assembling processes. In this work, we report a heteroatom‐tuned strategy to build up a series of two‐dimensional (2D) vinylene‐linked COFs by Knoevenagel condensation of an electron‐deficient methylthiazolyl‐based monomer with different triformyl substituted (hetero−)aromatic derivatives. The resulting COFs show high‐quality periodic mesoporous structures with high surface areas. Embedding heteroatoms into the backbones enables significantly improving their crystallinity, and finely tailoring their semiconducting structures. Upon visible light stimulation, one of the as‐prepared COFs with donor‐π‐acceptor structure could deliver a nearly seven‐fold increase in the catalytic activity of hydrogen generation as compared with the other two. Meanwhile, in combination with high crystallinity and the matched conduction band energy level, such kind of COFs can be able to selectively generate singlet oxygen and superoxide radicals in a high ratio of up to 30 : 1, allowing for catalyzing aerobic thioanisole oxidation in distinctly tunable activities through the substituent electronic effect of the substrates.

Modulating Dual Functionalities of Hydrazide Derivatives for Iodide Oxidation Suppression and Defect Passivation in Printable Mesoscopic Perovskite Solar Cells

AbstractThe oxidation of iodide ions during annealing in air and rich defects generated at crystal terminations in perovskite are major limitations for achieving high photovoltaic performance in printable mesoscopic perovskite solar cells (p‐MPSCs). Here, the dual role of hydrazide derivatives in inhibiting iodide oxidation and passivating crystal termination defects is reported and how the dual role is affected by the substituent is studied. It's found that varying the hydrazide derivative from formylhydrazine (FH) to benzhydrazide (BH) and then to 4‐tert‐butylbenzhydrazide (TBBH) by introducing phenyl and 4‐tert‐butylphenyl substituents enhances the electron donating ability of hydrazides due to substituent electronic effect. The tailored hydrazides present enhanced iodide oxidation suppression and defect passivation capabilities, which lowers the trap density of perovskite in p‐MPSCs significantly. As the most effective additive, TBBH improves the power conversion efficiency of the p‐MPSC from 18.66% to 20.30%, and the resulted device maintains 90% of its initial efficiency after 500 h tacking at maximum power point at 55 ± 5 °C under simulated 1 sun illumination.

Cs2CO3-Promoted Alkylation of 3-Cyano-2(1H)-Pyridones: Anticancer Evaluation and Molecular Docking.

Herein, a Cs2CO3-promoted N-alkylation of 3-cyano-2(1H)-pyridones containing alkyl groups with diverse alkyl halides to synthesize N-alkyl-2-pyridones over O-alkylpyridines is reported. The use of alkyl dihalides resulted in complex mixtures of N- and O-alkylated products. The primary factor influencing regioselectivity in these reactions is the electronic effects of substituents on the 2(1H)-pyridone ring, as evidenced by the preferential formation of O-alkylpyridines upon the introduction of aryl groups. Remarkably, we efficiently employed CuAAC and Ti(Oi-Pr)4-catalyzed amidation reactions to functionalize N-alkyl-2-pyridones containing propargyl and ester groups, leading to the synthesis of 1,2,3-triazoles and amides, respectively. Moreover, O-alkylpyridines 10 b and 10 d displayed remarkable selectivity toward the A-498 renal cancer cell line with growth inhibition percentages (%GI) of 54.75 and 67.64, respectively. The binding modes of compounds 10 b and 10 d to the PIM-1 kinase enzyme were determined through molecular docking studies.

Metabolic characteristic profiling of 1-amino-3,3-dimethyl-1-oxobutan-2-yl-derived indole and indazole synthetic cannabinoids in vitro

Characterizing the metabolic profiles of synthetic cannabinoids (SCs), a type of new psychoactive substances, is of particular importance for forensic detection and analysis. Although the metabolism of individual SCs derived from 1-amino-3,3-dimethyl-1-oxobutan-2-yl (ADB-SCs) has been reported, their metabolites also undergo a continuous change and combination of their tail and core regions. Therefore, elucidating the metabolic characteristics and effects of these structures is essential to enhance our understanding. In this study, the human liver microsome was used as the model for studying the in vitro phase I metabolism of 12 ADB-SCs, and the metabolites obtained were analyzed using ultra-high performance liquid chromatography–tandem four-level rod-electrostatic field orbital ion trap mass spectrometry to determine type, structure, and relative contents. The results indicated that hydroxylation and N-dealkylation were the major metabolic pathways in 12 ADB-SCs. The effects of the core and tail on the metabolism of these ADB-SCs were studied using theoretical calculations. For N-dealkylation metabolism, the strong electron-withdrawing conjugative effect of the –N= moiety in the pyrazole ring, steric hindrance of the tail, and electronic effect of substituents on the tail significantly affected metabolism. Further, it changed the relative contents of N-dealkylation metabolites. For hydroxylation, the reaction types were inconsistent at different parts. For instance, the phenyl group of the core is electrophilic, and its electron cloud density determines whether the phenyl group can be hydroxylated at the specific metabolic sites. Meanwhile, hydroxylation of the neopentyl moiety of the linked group involves the oxidation of aliphatic C–H bonds, whereas amide–hydroxylamine tautomerism affects hydroxylation metabolism. When the alkyl chain in the tail contains functional groups (such as –F and >CC<), oxidative defluorination or dihydrodiol metabolites are produced. Taken together, we systematically determined d the effect of functional groups in the core and tail of ADB-SCs on their metabolism, validating confirmed the feasibility of ADB-SC metabolism prediction based on their structural characteristics.

Electronic and Molecular Structures of a Series of Nickel Bis-1,1-Dithiolates.

A series of homoleptic Ni bis-1,1-dithiolates, [Ni(S2C2RR')2]2- (R=CN, R'=CN, CO2Et, CONH2, Ph, Ph-4-Cl, Ph-4-OMe, Ph-4-NO2, Ph-3-CF3, Ph-4-CF3, Ph-4-CN; R=NO2, R'=H; R=R'=CO2Et) have been synthesized from the reaction of the alkali metal salt of the ligand and nickel chloride, and isolated as tetraphenylphosphonium or tetrabutylammonium salts. The complexes were characterized by X-ray crystallography, high-resolution mass spectrometry, and infrared (IR), nuclear magnetic resonance (NMR) and electronic absorption spectroscopies. The molecular structures show a rigidly square planar Ni(II) center linking two four-membered chelate rings whose dimensions are constant across the series. The electronic effect of the ligand substituent is revealed in the 13C NMR and electronic spectra, and corroborated by density functional calculations. Electron withdrawing groups deshield the low-field CS2 resonance, and the signature charge transfer band in the visible region is red-shifted. These observables have been accurately reproduced computationally, and revealed the Ni contribution to the ground state diminishes with decreasing electron withdrawing capacity of the ligand substituent. In contrast to 1,2-dithiolates, the redox inactivity afforded by 1,1-dithiolates stems from the smaller chelate ring and substantially reduced sulfur content that is key to stabilizing the radical form.

Leveraging Electron Push-Pull Effect for Catalytic Polymerization and Degradation of a Cyclobutane Monomer System.

Ring-opening polymerization (ROP) offers a striking solution to solve problems encountered in step-growth condensation polymerization, including precise control over molecular weight, molecular weight distribution, and topology. This has inspired our interest in ROP of cycloalkanes with an ultimate goal to rethink polyolefins, which clearly poses a number of challenges. Practicality of ROP of cycloalkanes is actually limited by their low polymerizability and elusive mechanisms which arise from significantly varied ring size and non-polar C-C bonds in monomers. In this work, by using Lewis acid/Brønsted base/C(sp3)-H initiator system previously developed in our laboratory, we focus on cyclobutanes and explore the positional and electronic effects of substituents on the ring, namely electron push-pull effect, in promoting controlled polymerization to afford densely functionalized poly(cyclobutanes), as well as catalytic degradation of obtained polymers for upcycling. More importantly, experiments and DFT calculations unveil considerable population of Lewis-acid-induced thermostabilized 1,4-zwitterions, which distinguish cyclobutanes from cyclopropanes and others. All these findings would shed light on catalytic synthesis and degradation of saturated all-carbon main-chain polymers, as well as small molecule transformations of cyclobutanes.

Leveraging Electron Push‐Pull Effect for Catalytic Polymerization and Degradation of a Cyclobutane Monomer System

AbstractRing‐opening polymerization (ROP) offers a striking solution to solve problems encountered in step‐growth condensation polymerization, including precise control over molecular weight, molecular weight distribution, and topology. This has inspired our interest in ROP of cycloalkanes with an ultimate goal to rethink polyolefins, which clearly poses a number of challenges. Practicality of ROP of cycloalkanes is actually limited by their low polymerizability and elusive mechanisms which arise from significantly varied ring size and non‐polar C−C bonds in monomers. In this work, by using Lewis acid/Brønsted base/C(sp3)‐H initiator system previously developed in our laboratory, we focus on cyclobutanes and explore the positional and electronic effects of substituents on the ring, namely electron push‐pull effect, in promoting controlled polymerization to afford densely functionalized poly(cyclobutanes), as well as catalytic degradation of obtained polymers for upcycling. More importantly, experiments and DFT calculations unveil considerable population of Lewis‐acid‐induced thermostabilized 1,4‐zwitterions, which distinguish cyclobutanes from cyclopropanes and others. All these findings would shed light on catalytic synthesis and degradation of saturated all‐carbon main‐chain polymers, as well as small molecule transformations of cyclobutanes.

Electronic effects of substituents on the properties of recyclable epoxy resins containing aromatic acetal groups

Both environmental and economic concerns are pioneering the development of recyclable thermosetting polymers. In this study, three liquid acetal-containing di-epoxide monomers (ADEs) with different para-substituted (-OCH3, -Cl and –NO2) phenyl groups were synthesized. The refractive indices and viscosities of the three di-epoxide liquids increase in the sequence of ADE-3 (-OCH3), ADE-1 (-Cl) and ADE-2 (-NO2). Once cured with methylhexahydrophthalic anhydride, the three cured ADEs exhibit high glass transition temperatures (181–218 °C). Due to the presence of dynamic acetal bonds, all three cured ADEs are reprocessable, repairable, weldable, and degradable. Interestingly, the electronic effect of the substituents on the phenyl group significantly impacts the structural configuration, reprocessability and degradation behaviors of the resultant cured ADEs. As the electron-withdrawing effect of the substituents on the phenyl group increases, the stress relaxation rates of the cured ADEs decrease at the same temperature. Under optimized reprocessing conditions, the reprocessed ADE-1 (-Cl) and ADE-2 (-NO2) resins show the highest (117 %) and lowest (67 %) retention rates for tensile strength, respectively. The degradation rates of the three cured ADEs in the acidic solutions decrease with increasing the electron-withdrawing effect of the substituent on the phenyl group. Finally, a di-epoxide curing system based on ADE-3 was applied to prepare carbon fiber-reinforced composites, and nondestructive recovery of the carbon fibers was attained by degradation of the resin matrix.

Electronic inductive and resonance effects of substituents on concerted two-proton-coupled electron transfer between electrogenerated superoxide and hydroquinone derivatives in N,N-dimethylformamide

Improving energy conversion technologies is pivotal for reducing the effects of global warming. The use of electron transfer catalysts based on electron carriers found in organisms, such as redox biomimetic quinone systems, is a promising route for truly efficient energy conversion. Herein, we report the density functional theory (DFT)-based analysis of the reaction between electrogenerated superoxide radical anion (O2•−) and methyl- or chloro-substituted benzene-1,4-diol (hydroquinone) derivatives in N,N-dimethylformamide. We investigate the electrochemical scavenging of O2•− by hydroquinone derivatives involving two proton transfers (PTs) and one electron transfer (ET). We show that chloro and methyl substituents promote a proton-coupled electron transfer (PCET) reaction with the effect increasing with the number of substituent groups. Our DFT results demonstrate that the substituent effect promotes either of the PT or ET processes, along a sequential PCET pathway. The electrochemical and DFT analyses of the substituent effect indicate that the concerted two-proton-coupled electron transfer (2PCET) promoted by an increasing number of the substituents is a plausible pathway for the reaction between electrogenerated O2•− and hydroquinone derivatives. In addition, our findings show that the resonance effect is the main driving force for the promotion of 2PCET.

1H NMR SPECTRAL CHARACTERISTICS OF PYRIDO[1,2-A]BENZIMIDAZOLE AND ITS DERIVATIVES

A systematic study of proton NMR spectra of pyrido[1,2-a]benzimidazole and 65 of its mono-, di- and poly-substituted derivatives with substituents in the pyridine and/or benzene fragment was carried out. The choice of certain structures is related to the great practical significance, as well as the complexity of interpreting their 1H NMR spectra. As a result of the research, a number of general patterns of arrangement (characteristic ranges) on the scale of chemical shifts of signals of hydrogen atoms associated with the nucleus of the studied heterocycles have been established. In the 1H NMR spectrum of pyrido[1,2-a]benzimidazole and most of its derivatives, the H1 signal of the pyridine cycle associated with a carbon atom was released in the weakest field, which experienced a strong electron acceptor effect of the nodal endocyclic nitrogen atom. The signal of another heteroaromatic proton H2 was usually detected in the strongest field region of the spectrum. The H8 signal had the smallest chemical shift among the aromatic protons. As the analysis of 1D 1H NOE spectra of a series of pyrido[1,2-a]benzimidazoles showed, this position of the heterocycle was the reaction center for the introduction of an electrophilic particle under SEAr reaction conditions. The H9 signal was detected in a weaker field relative to other aromatic protons. The influence of the electronic nature of the substituent and its position in the condensed heterocycle on the distribution of the electron density in the molecule has been established. It is concluded that the transmission of electronic effects of substituents in pyrido[1,2-a]benzimidazoles differs from benzoid systems. A number of controversial proton signals were attributed by means of 1H-1H NOESY and 1H-15N HMBC spectroscopy. The conducted studies will allow to use the data of 1H NMR spectroscopy to determine potential reaction centers in pyrido[1,2-a]benzimidazoles and other similar condensed pyridine derivatives with a nodal nitrogen atom. For citation: Begunov R.S., Fakhrutdinov A.N., Sokolov A.A., Savina L.I., Bashkov N.E. 1H NMR spectral characteristics of pyrido[1,2-a]benzimidazole and its derivativese. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 5. P. 43-53. DOI: 10.6060/ivkkt.20246705.6971.

Structural Analysis of 3,5-Bistrifluoromethylhydrocinnamic Acid

The crystal structure of 3,5-bistrifluoromethylhydrocinnamic acid [systematic name: 3-[3,5-bis(trifluoromethyl)phenyl]propanoic acid], C11H8F6O2, has been determined and described. The structure was subject to the Hirshfeld surface-analysis and CE-B3LYP interaction-energies calculations. The title compound crystallises in the monoclinic P21/c space group with one molecule in the asymmetric unit. The propanoic acid side chain of the studied molecule has a bent conformation. The key supramolecular motif in the crystal structure is a centrosymmetric O–H∙∙∙O hydrogen-bonded dimer (R22(8) in the graph set notation). According to CE-B3LYP, the molecules involved in this motif exhibit the strongest pairwise interaction total energy (Etot = −67.9 kJ/mol). On the other hand, there are seven other interacting molecular pairs with significant Etot values in the range of −17 to −28 kJ/mol. In these, the energy is dominated by the dispersive contribution. A survey of the Cambridge Structural Database revealed that in other 3-phenylpropanoic acid structures, the middle dihedral angle of the propanoic acid side chain is always in the trans conformation. This contrasts the current structure where this dihedral angle is in the gauche conformation. According to the Density Functional Theory calculations in the gas phase (at the B3LYP/aug-cc-pvDZ level), the presence of the two CF3 groups (strong electron-withdrawing character) increases the population of the gauche conformers by a substituent electronic effect, and this may be a minor factor contributing to the appearance of this conformation observed in the solid state.

Effects of additional ring-fusion site on dual reactivity based dynamic covalent chemistry

Tautomers are widespread in organic chemistry, and their unique reactivity allows diverse transformations. In this work, the incorporation of nearby amide ring-fusion site offered a versatile platform for controlling dual reactivity based dynamic covalent chemistry (DCC) of aldehyde ring-chain tautomers. A suite of 2-formylbenzosulfonamide derived tautomers were prepared, and the intramolecular ring-chain equilibrium and intermolecular dynamic covalent reactions along the underlying mechanistic foundation were investigated. By regulating the substituent electronic effect and solvent effect, ring-chain tautomerization equilibrium was readily regulated in solution. The adjacent amide NH participates in intramolecular hydrogen bonding, as revealed by crystal analysis. Furthermore, the addition of acid and the change of solvent allowed turning on/off the intramolecular cyclization from the amide group to create fused ring scaffolds. Finally, the reversible covalent reactions with amine nucleophile reagents maintained the intermolecular reactivity successfully. The molecular and pathway diversity reported herein sets the scene for future design and applications.

Ethylene/Polar Monomer Copolymerization by [N, P] Ti Complexes: Polar Copolymers with Ultrahigh-Molecular Weight.

A series of novel titanium complexes (2a-2e) bearing [N, P] aniline-chlorodiphenylphosphine ligands (1a-1e) featuring CH3 and F substituents have been synthesized and characterized. Surprisingly, in the presence of polar additive, the complexes (2a-2e) all displayed high catalytic activities (up to 1.04 × 106 gPolymer (mol·Ti)-1·h-1 and produced copolymer with the ultrahigh molecular weight up to 1.37 × 106 g/mol. The catalytic activities are significantly enhanced by introducing electron-withdrawing group (F) into the aniline aromatic ring. Especially, the increase in activity based on different complexes followed the order of 2e > 2d > 2c > 2b > 2a. Simultaneously, density functional theory (DFT) calculations have been performed to probe the polymerization mechanism as well as the electronic and steric effects of various substituents on the catalyst backbone. DFT computation revealed that the polymerization behaviors could be adjusted by the electronic effect of ligand substituents; however, it has little to do with the steric hindrance of the substituents. Furthermore, theoretical calculation results keep well in accordance with experimental measurement results. The article provided an appealing design method that the employment of fluorine atom as electron-withdrawing to be studied is the promotive effect of transition-metal coordination polymerization.

Adjusting UV-Vis Spectrum of Alizarin by Insertion of Auxochromes.

First synthesized in 1868, alizarin became one of the first synthetic dyes and was widely used as a red dye in the textile industry, making it more affordable and readily available than the traditional red dyes derived from natural sources. Despite extensive both experimental and computational analyses on the electronic effects of substituents on the shape of the visible spectrum of alizarin and alizarin Red S, no previous systematic work has been undertaken with the aim to fine tune the dominant absorption region defining its color by introducing other electron-withdrawing or electron-donor groups. For such, we have performed a comprehensive study of electronic effects of substituents in position C3 of alizarin by means of a time dependent DFT approach. These auxochromes attached to the chromophore are proven to alter both the wavelength and intensity of absorption. It is shown that the introduction of an electron-donor group in alizarin causes the transition bands to be significantly red-shifted whereas electron-withdrawing groups cause a minor blue-shifting.

Substituent effects on the selectivity of ambimodal [6+4]/[4+2] cycloaddition.

In this work, we report a density functional theory (DFT) study and a dynamical trajectory study of substituent effects on the ambimodal [6+4]/[4+2] cycloaddition proposed for 1,3,5,10,12-cycloheptadecapentaene, referred to as cycloheptadecapentaene. The proposed cycloaddition proceeds through an ambimodal transition state, which results in both a [6+4] adduct a [4+2] adduct directly. The [6+4] adduct can be readily converted to the [4+2] adduct via a Cope rearrangement. We study the selectivity of the reaction with regard to the position of substituents, steric effects of substituents, and electronic effects of substituents. In the dynamical trajectory study, we find that nitro-substituted reactants lead to a new product from the ambimodal transition state via the hetero Diels-Alder reaction, and this new product can then be converted to a [4+2] adduct by a hetero [3, 3]-sigmatropic rearrangement. These results may provide insights for designing more bridged heterocyclic compounds.

Electronic substituent effect on the conformation of a phenylalanine-incorporated cyclic peptide.

The Phe-incorporated cyclic peptide [cyclo(-Phe1-oxazoline2-d-Val3-thiazole4-Ile5-oxazoline6-d-Val7-thiazole8-)] is in a conformational equilibrium between square and folded forms in solution. In the folded form, a CH⋯π interaction between the Phe1 aromatic ring and the Oxz2 methyl group is observed. We endeavored to control the local conformation and thus modulate the CH⋯π interaction and flexibility of the Phe1 side chain by controlling the electronic substituent effects at the 4-position of the aromatic ring of the Phe1 residue. The effect of the 4-substituent on the global conformation was indicated by the linear relationship between the conformational free energies (ΔGo) determined through NMR-based quantification and the Hammett constants (σ). Electron-donating substituents, which had relatively strong CH⋯π interactions, promoted peptide folding by restraining the loss in entropy. Local control by the 4-substituent effects suggested that the Phe side chain exerts an entropic influence on the folding of these cyclic peptides.