Electron Paramagnetic Resonance Spectra Research Articles

Trivalent Gd incorporated Zn2SiO4 phosphor material for EPR and luminescence investigations

Abstract Zn2SiO4:Gd3+ powder was obtained by the sol–gel preparation technique and then characterized by using Fourier-transform infrared spectroscopy and X-ray diffraction techniques. The sample exhibited photoluminescence in the ultraviolet spectral zone with a maximum emission wavelength of 314 nm. Ultraviolet emission in the range of 305–320 nm is also called ultraviolet-B emission. This UV range emission is used in lamps for skin treatment and phototherapy. The electron paramagnetic resonance spectrum recorded for the Zn2SiO4:0.015Gd3+ phosphor revealed g values of 3.46, 2.64, and 2.20, confirming the presence of Gd3+ ions in the small ligand field. Furthermore, Gd3+ ions attain tetrahedral symmetry in the prepared host compound.

Dissolved black nitrogen: an overlooked active nano-catalyst in the abiotic transformation of chlorophenols by sulfides in the subsurface water

The incomplete combustion of biomass and fossil fuels results in the formation of not only black carbon (BC) but also black nitrogen (BN), the dissolved fractions of which (i.e., DBC and DBN) are important components of dissolved organic matter pool. Relative to DBC, the activity and reactivity of DBN are much less understood. Here, we investigated the catalytic effect of DBN derived from N-enriched biomass in the abiotic transformation of chlorophenols by sulfides. The medium-temperature DBN (450 °C) exhibited 13–144% higher catalytic efficiency than other DBN samples and 9.3 times higher than its DBC counterpart. Both electron paramagnetic resonance spectra and fluorescent probe technique indicated that the attached sulfides contributed to the formation of reactive oxygen species (ROS) as the “primary” radicals by favoring electron transfer from DBN to chemisorbed oxygen, and then the generated ROS reacted with N-oxides in DBN to form reactive nitrogen species (RNS) as the “secondary” radicals. The contribution of RNS to the decay of 2-chlorophenol by DBN450 was up to 72%, much higher than that of ROS and non-radical mechanism. These findings suggest that the catalytic effect of DBN is distinct but no less significant than that of DBC to the abiotic transformation of micropollutants in water/soil systems.Graphical

Synthesis and Properties of the Ba2PrWO6 Double Perovskite.

We report details on the synthesis and properties of barium praseodymium tungstate, Ba2PrWO6, a double perovskite that has not been synthesized before. Room-temperature (RT) powder X-ray diffraction identified the most probable space group (SG) as monoclinic I2/m, but it was only slightly distorted from the cubic structure. X-ray photoelectron spectroscopy confirmed that the initial (postsynthesis) material contained praseodymium in both 3+ and 4+ charge states. The former (Pr3+) disappeared after exposure to UV light at RT. Photoluminescence studies of Pr3+ revealed that Ba2PrWO6 is an insulator with a band gap exceeding 4.93 eV. Pressure-dependent Raman spectroscopy excluded the possibility of a phase transition up to 20 GPa; however, measurements between 8 and 873 K signified that there might be a change toward the lower symmetry SG below 200 K. Electron paramagnetic resonance spectra revealed the presence of interstitial oxygen which acts as a deep electron trap.

Copper(II) coordination to the intrinsically disordered region of SARS-CoV-2 Nsp1

The intrinsically disordered C-terminal peptide region of severe acute respiratory syndrome coronavirus 2 nonstructural protein-1 (Nsp1-CT) inhibits host protein synthesis by blocking messenger RNA (mRNA) access to the 40S ribosome entrance tunnel. Aqueous copper(II) ions bind to the disordered peptide with micromolar affinity, creating a possible strategy to restore protein synthesis during host infection. Electron paramagnetic resonance (EPR) and tryptophan fluorescence measurements on a 10-residue model of the disordered protein region (Nsp1-CT10), combined with advanced quantum mechanics calculations, suggest that the peptide binds to copper(II) as a multidentate ligand. Two optimized computational models of the copper(II)-peptide complexes were derived: One corresponding to pH 6.5 and the other describing the complex at pH 7.5 to 8.5. Simulated EPR spectra based on the calculated model structures are in good agreement with experimental spectra.

Encapsulating stable perovskite catalysts in hollow nanoreactors for enhanced pollutants degradation

Creating a microenvironment for enhanced peroxymonosulfate (PMS) activation is vital in advanced oxidation processes. The objective of this study was to fabricate nanoshells composed of titanium dioxide embedded with cobalt titanate nanoparticles of perovskite to act as nanoreactors for effectively initiating PMS and degrading contaminants. The unique porous structure and confined space of the nanoreactor facilitated reactant absorption and mass transfer to the active sites, resulting in exceptional catalytic performance for pollutant elimination. Experimental findings revealed close to 100% decomposition efficiency of 4-chlorophenol (4-CP) within an hour utilizing the nanoreactors over a wide pH range. The TiO2/CoTiO3 hollow nanoshells catalysts also displayed adaptability in disintegrating organic dyes and antibiotics. The radicals SO4•-, •OH, and non-radicals 1O2 were determined to be accountable for eliminating pollutants, as supported by trapping experiments and electron paramagnetic resonance spectra. The catalyst was confirmed as an electron donor and PMS as an electron acceptor through electrochemical tests and density functional theory calculations. This study underscores the potential of incorporating stable perovskite catalysts in hollow nanoreactors to enhance wastewater treatment.

Theory of electron spin resonance in scanning tunneling microscopy

Electron spin resonance (ESR) spectroscopy in scanning tunneling microscopy (STM) has enabled probing the electronic structure of single magnetic atoms and molecules on surfaces with unprecedented energy resolution, as well as demonstrating coherent manipulation of single spins. Despite this remarkable success, the field could still be greatly advanced by a more quantitative understanding of the ESR-STM physical mechanisms. Here, we present a theory of ESR-STM that quantitatively models not only the ESR signal itself, but also the full background tunneling current, from which the ESR signal is derived. Our theory is based on a combination of Green's function techniques to describe the electron tunneling and a quantum master equation for the dynamics of the spin system along with microwave radiation interacting with both the tunneling current and the magnetic system. We show that this theory is able to quantitatively reproduce the experimental results for a spin-1/2 system (TiH molecules on MgO) across many orders of magnitude in tunneling current, providing access to the relaxation and decoherence rates that govern the spin dynamics due to intrinsic mechanisms and to the applied bias voltage. More importantly, our work establishes that (i) sizable ESR signals, which are a measure of microwave-induced changes in the junction magnetoresistance, require surprisingly high tip spin polarizations, and (ii) the coupling of the magnetization dynamics to the microwave field gives rise to the asymmetric ESR spectra often observed in this spectroscopy. Additionally, our theory provides very specific predictions for the dependence of the relaxation and decoherence times on the bias voltage and the tip-sample distance. Finally, with the help of electromagnetic simulations, we find that the transitions in our ESR-STM experiments, in which the tunnel junction is irradiated by a nearby microwave antenna, can be driven by the ac magnetic field at the junction. Published by the American Physical Society 2024

Preparation and characterization of MnIIMnIII complexes with relevance to class Ib ribonucleotide reductases

The Mn2 complex [MnII2(TPDP)(O2CPh)2](BPh4) (1, TPDP = 1,3-bis(bis(pyridin-2-ylmethyl)amino)propan-2-ol, Ph =phenyl) was prepared and subsequently characterized via single-crystal X-ray diffraction, X-ray absorption, electronic absorption, and infrared spectroscopies, and mass spectrometry. 1 was prepared in order to explore its properties as a structural and functional mimic of class Ib ribonucleotide reductases (RNRs). 1 reacted with superoxide anion (O2•–) to generate a peroxido-MnIIMnIII complex, 2. The electronic absorption and electron paramagnetic resonance (EPR) spectra of 2 were similar to previously published peroxido-MnIIMnIII species. Furthermore, X-ray near edge absorption structure (XANES) studies indicated the conversion of a MnII2 core in 1 to a MnIIMnIII state in 2. Treatment of 2 with para-toluenesulfonic acid (p-TsOH) resulted in the conversion to a new MnIIMnIII species, 3, rather than causing O—O bond scission, as previously encountered. 3 was characterized using electronic absorption, EPR, and X-ray absorption spectroscopies. Unlike other reported peroxido-MnIIMnIII species, 3 was capable of oxidative O—H activation, mirroring the generation of tyrosyl radical in class Ib RNRs, however without accessing the MnIIIMnIV state.

Two-Site Occupation for Constructing Double Perovskite BaLaMgNbO6:Cr3+ Ultrabroadband NIR Phosphors.

Given the escalating significance of near-infrared (NIR) spectroscopy across industries, agriculture, and various domains, there is an imminent need to address the development of a novel generation of intelligent NIR light sources. Here, a series of Cr3+-doped BaLaMgNbO6 (BLMN) ultrabroadband NIR phosphor with a coverage range of 650-1300 nm were developed. The emission peak locates at 830 nm with a full width at half maximum of 210 nm. This ultrabroadband emission originates from the 4T2→4A2 transition of Cr3+ and the simultaneous occupation of [MgO6] and [NbO6] octahedral sites confirmed by low photoluminescence spectra (77-250 K), time-resolved photoluminescence spectra, and electron paramagnetic resonance spectra. The fluxing strategy improves the luminescence intensity and thermal stability of BLMN:0.02Cr3+ phosphors. The internal quantum efficiency (IQE) is 51%, external quantum efficiency (EQE) can reach 33%, and thermal stability can be maintained at 60%@100 °C. Finally, we successfully demonstrated the application of BLMN:Cr3+ ultrabroadband in the qualitative analysis of organic matter and food freshness detection.

Crystal structures, electron spin resonance, and thermogravimetric analysis of three mixed-valence copper cyanide polymers.

The crystal structures of three mixed-valence copper cyanide alkanolamine polymers are presented, together with thermogravimetric analysis (TGA) and electron spin resonance (ESR) data. In all three structures, a CuII moiety on a crystallographic center of symmetry is coordinated by two alkanolamines and links two CuICN chains via cyanide bridging groups to form diperiodic sheets. The sheets are linked together by cuprophilic CuI-CuI interactions to form a three-dimensional network. In poly[bis(μ-3-aminopropanolato)tetra-μ-cyanido-dicopper(I)dicopper(II)], [Cu4(CN)4(C3H8NO)2]n, 1, propanolamine bases have lost their hydroxyl H atoms and coordinate as chelates to two CuII atoms to form a dimeric CuII moiety bridged by the O atoms of the bases with CuII atoms in square-planar coordination. The ESR spectrum is very broad, indicating exchange between the two CuII centers. In poly[bis(2-aminopropanol)tetra-μ-cyanido-dicopper(I)copper(II)], [Cu3(CN)4(C3H9NO)2]n, 2, and poly[bis(2-aminoethanol)tetra-μ-cyanido-dicopper(I)copper(II)], [Cu3(CN)4(CH7NO)2]n, 3, a single CuII atom links the CuICN chains together via CN bridges. The chelating alkanolamines are not ionized, and the OH groups form rather long bonds in the axial positions of the octahedrally coordinated CuII atoms. The coordination geometries of CuII in 2 and 3 are almost identical, except that the Cu-O distances are longer in 2 than in 3, which may explain their somewhat different ESR spectra. Thermal decomposition in 2 and 3, but not in 1, begins with the loss of HCN(g), and this can be correlated with the presence of OH protons on the ligands in 2 and 3, which are not present in 1.

Force/Acid-Activated and Radical-Regulated photochromic luminescence in a binuclear Zero-Dimensional complex for multi-level anti-counterfeiting

Traditional static optical anti-counterfeiting technology can only output a single emission signal, which is easy to replicate and difficult to meet the needs in current high-tech fields. Multi-level stimuli-responsive luminescent materials with internal logical relationship can improve the degree of anti-counterfeiting and resist against the flood of counterfeiting. In this work, we propose to use force and acid dual stimuli to restrict the dissipation path of photogenerated free radicals, which further lead to the radical-actuated photochromic luminescence (PCL) performance. Based on this strategy, a zero-dimensional (0D) dinuclear zinc complex Zn2(9-AC)4(IM)2 (1) with blue luminescent properties (450 nm) was designed and synthesized. The interaction between 9-AC and IM (as 9-AC/IM exciplex) can be cut off by force-induced rearrangement of structural units in the spatial dimensions or acid-induced protonation of 9-AC, achieving the luminescent transformation from 9-AC/IM exciplex (447 nm) to 9-AC/9-AC excimer (480 nm) or 9-HAC (485 nm). At the same time, the PCL performance was activated and the emission intensity quenching rate increased from 4.77 % to 93.86 % or 44.93 % under UV light irradiation, respectively. The solid-state ultraviolet–visible absorption spectra, electron paramagnetic resonance spectra and theoretical calculation confirmed that the activation of PCL performance is due to the fact that the 9-AC• radicals are more difficult to dissipate upon force- or acid-induced stimuli. Combining mechanochromic luminescence (MCL) and PCL, a dynamic anti-counterfeiting quick response (QR) code with multi-level and fast-responsive logic sequence have been designed, which are promising for the application in time-resolved information encryption. This work provides an effective strategy to construct multi-level stimuli-responsive luminescence as novel anti-counterfeiting materials by changing the photogenerated free radical dissipation pathway to activate PCL properties.

Boosting peroxymonosulfate activation over partial Zn-substituted Co3O4 for florfenicol degradation: Insights into catalytic performance, degradation mechanism and routes

Florfenicol (FLO) is a broad-spectrum halogenated antibiotic (containing F and Cl atoms), and the discharged FLO in wastewater exhibits potential biotoxicity. Peroxymonosulfate (PMS) activation can generate reactive oxygen species (ROSs) to realize efficient degradation of organic pollutants. Herein, Zn-substituted Co3O4 (ZnxCo) catalysts were prepared and applied in PMS activation for FLO degradation. The physicochemical properties were systematically studied by combining experiments and density functional theory (DFT) calculation. The Zn partial substitution induced electron rearrangement and promoted oxygen vacancy (OV) formation in Co3O4. Zn0.03Co catalyst exhibited superior FLO removal, achieving a higher reaction rate of 0.112 min−1 than Co3O4 (0.053 min−1). The FLO degradation was highly dependent on the factors of PMS/Zn0.03Co/FLO dosage, temperature, initial pH, and coexisting inorganic anions. The Zn0.03Co also displayed outstanding performance in PMS activation for degradation of various typical organic pollutants. Electron paramagnetic resonance (EPR) spectra and quenching experiments indicated that both radical species (·OH, SO4·-, and ·O2-) and nonradical species (1O2) contribute to FLO removal. The redox cycle of Co3+/Co2+ and OVs played an essential role in PMS activation. The electron structure of FLO and parameters of PMS adsorbed on ZnxCo were calculated. The longer length of CoO and OO bonds for the adsorbed PMS could enhance its activation to generate ROSs. The intermediates were detected, and five degradation pathways were proposed. The acute and chronic toxicities of intermediates suggested that the dechlorination process is important for the toxicity attenuation of FLO. This study clarified the performance enhancement mechanism of Zn substitution on FLO degradation by PMS activation using Co3O4 based catalyst, which favors the development of PMS-based advanced oxidation processes for wastewater treatment.

Heterogeneous micellar solubilization within lyotropic liquid crystals interfaces

The solubilization of sodium diclofenac (Na-DFC) in a glycerol mono-oleate-based emulsion triggers structural changes. A reverse hexagonal mesophase forms at 2–5 wt% Na-DFC. Above 6 wt%, the hexagonal symmetry gradually transitions to a disordered lamellar mesophase at 9 wt%. These structural shifts impact the storage modulus, structuring enthalpy, and structural diffusivity of the system. Despite these transitions, the driving force for Na-DFC release remains consistent, leading to hypothesize that the interfacial structure remains unchanged during Na-DFC release.The nano-structural modifications imposed by the Na-DFC load and release were assessed by small-angle X-ray diffraction (SAXD), spin-probe electron paramagnetic resonance (EPR), and nuclear quadrupole resonance (NQR).The selective solubilization of Na-DFC was demonstrated in the SAXD peak fittings, revealing an increase in hexagonally oriented rods at the expense of non-oriented micelles, rather than gradual micellar elongation. Computation of the EPR spectra also showcased the selective solubilization of Na-DFC at an enhanced free energy interface (γ), evidenced by step-wise variations in polarity, microviscosity, and order parameters. Additionally, NQR analysis highlighted a higher anisotropy for sodium compared to deuterium, linking the selective solubilization of Na-DFC to heterogeneous structural transformations. These findings underscore the heterogeneous nature of solubilization-release processes, driven by locally increased micellar free energy. Consequently, the loaded Na-DFC interfaces maintain a constant γ, ensuring a consistent release driving force despite structural transitions affecting the matrix. The ability to selectively solubilize guest molecules may herald a new era in the utilization of selective molecular interfacial loading.

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties.

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

Electron Spin Resonance Study of Magnetite Nanoparticles in iPP Matrix

Electron Spin Resonance Study of Magnetite Nanoparticles in iPP Matrix

Metal-organic framework gel derived magnetic hierarchical porous Fe-N-C catalyst as peroxymonosulfate activator for efficient degradation of amoxicillin via singlet oxygen-dominated nonradical pathway

The rational design of transition metal and nitrogen co-doped carbon-based catalysts for the efficient removal of antibiotics through non-radical pathway of peroxymonosulfate (PMS) activation has attracted widespread attention. Herein, a magnetic hierarchical porous Fe-N-C catalyst (FeBDC-NH2-800) was successfully constructed by pyrolyzing the hierarchical porous precursor metal–organic framework gel (FeBDC-NH2) consisting of nitrogen-containing ligands. Benefiting from the defective heterojunction structure, the catalyst exhibited effective and efficient degradation towards amoxicillin (AMX) by activating PMS to produce 1O2. The degradation of AMX was up to 97.4 % within 30 min, which was 2.48 and 2.16 times more than that of FeBDC-NH2/PMS and nanosized Fe3O4/PMS respectively. The high degradation performance could be maintained toward low pollutant concentration conditions and cycle experiments, manifesting its possibility for practical application. Combining the data of quenching experiments, electron spin resonance spectra, electrochemical experiments, X-ray photoelectron spectra and density functional theory calculation, the mechanism was revealed that radical pathway contributed little during degradation while singlet oxygen played a significant role. The cleavage of lattice oxygen and defective heterogeneous structure of FeBDC-NH2-800 contributed together to promote PMS for 1O2 production.

ESR and optical investigation of tetragonal PbTiO3 nanoparticles embedded in lithium tetraborate glass matrix

Glass-nanocomposites (GNCs) samples of composition [(100−x) Li2B4O7–xPbTiO3] with x = 5, 10, 15 and 20 mol% were prepared by melt quenching method. The two phases of the GNCs samples, a glassy phase and PbTiO3 nanoparticles/clusters phase, can be seen in the energy dispersive X-ray spectra and scanning electron microscopic micrographs. Fourier transformation infrared spectra of the GNCs samples exhibited bands due to triangular with NBO’s and tetrahedral borate groups. Additionally, the Ti4+ ions exist in both TiO4 and TiO6 structural units while the Ti3+ ions exist in TiO6 structural units. The electron spin resonance (ESR) spectra of the GNCs samples exhibit two ESR signals, broad and narrow, corresponding to the Ti3+ (3d1) ions in both tetragonal deformed octahedral and in the other structural configuration, respectively. The optical transmission spectra of the GNCs samples exhibited three transmission bands, 3Γ5 → 2Γ3, 2B2g → 2B1g and 2B2g → 2A1g transitions, in the visible region. The variation in optical band gap (Eopt) with increasing PbTiO3 content were due to the conversion between BO3 with NBOs and BO4 units as well as the reduction of Ti4+ to Ti3+ ions in the GNCs matrix. These results demonstrate that the present GNCs may be used for practical applications such as optical devices.

Apatite-Forming Ability and Visible Light-Enhanced Antibacterial Activity of CuO-Supported TiO2 Formed on Titanium by Chemical and Thermal Treatments.

Titanium with apatite-forming ability as well as antibacterial activity is useful as a component of antibacterial dental implants. When Ti was subjected to hydrogen peroxide (H2O2), copper acetate (Cu(OAc)2), and heat (H2O2-Cu(OAc)2-heat) treatments, a network structure of anatase and rutile titanium dioxide (TiO2) and fine copper oxide (CuO) particles was formed on the Ti surface. The resulting samples accumulated a dense and uniform apatite layer on the surface when incubated in simulated body fluid and showed enhanced antibacterial activity against Escherichia coli and Staphylococcus aureus under visible-light irradiation. Electron spin resonance spectra of H2O2-Cu(OAc)2-heat-treated samples showed that hydroxyl radicals (·OH) were generated from the samples, and the concentration of ·OH increased with increasing Cu concentration of the Cu(OAc)2 solution. The enhanced antibacterial activity of these samples under visible-light irradiation may be attributable to the generation of ·OH from samples. These results suggest that Ti implants obtained using H2O2-Cu(OAc)2-heat treatments and subjected to regular or on-demand visible-light irradiation may provide a decreased risk of peri-implantitis.

A sequencing electroreduction-electrooxidation system driven by atomic hydrogen for enhancing 2,4-dichloronitrobenzene removal from wastewater

The sequencing electroreduction-electrooxidation process has emerged as a promising approach for the degradation of the chloronitrobenzenes (CNBs) due to its elimination of electro-withdrawing groups in the reduction process, facilitating further removal in the subsequent oxidation process. Herein, we developed a cathode consisting of atom Pd on a Ti plate, which enabled the electro-generation of atomic hydrogen (H*) and the efficient electrocatalytic activation of H2O2 to hydroxyl radical (•OH). Cyclic voltammetry (CV) curves and electron spin resonance (ESR) spectra verified the existence of H* and •OH. The electroreduction-electrooxidation system achieved 94.7% of 20 mg L−1 2,4-DCNB removal with a relatively low H2O2 addition (5 mM). Moreover, the inhibition rate of Photobacterium phosphoreum in the effluent decreased from 95% to 52% after the sequencing electroreduction-electrooxidation processes. It was further revealed that the H* dominated the electroreduction process and triggered the electrooxidation process. Our work sheds light on the effective removal of electron-withdrawing groups substituted aromatic contaminants from water and wastewater.

Phosphotungstic Acid Clusters Decorated Znln2S4 Nanoflowers as Molecular-Scale S-Scheme Heterojunctions for Simultaneous H2 Evolution and Benzyl Alcohol Upgrading.

Simultaneous utilization of photogenerated electrons and holes to achieve overall redox reactions is attractive but still far from practical application. The emerging step (S)-scheme mechanism has proven to be an ideal approach to inhibit charge recombination and supply photoinduced charges with highest redox potentials. Herein, a hierarchical phosphotungstic acid (H3PW12O40, HPW)@Znln2S4 (ZISW) heterojunction was prepared through one-pot hydrothermal method for simultaneous hydrogen (H2) evolution and benzyl alcohol upgrading. The fabricated HPW-based heterojunctions indicated much enhanced visible-light absorption, promoted photogenerated charge transfer and inhibited charge recombination, owing to hierarchical architecture based on visible-light responsive Znln2S4 microspheres, and S-scheme charge transfer pathway. The S-scheme mechanism was further verified by free-radical trapping electron spin resonance (ESR) spectra. Moreover, the wettability of composite heterojunction was improved by the modification of hydrophilic HPW, contributing to gaining active hydrogen (H+) from water sustainably. The optimal ZISW-30 heterojunction photocatalyst indicated an enhanced hydrogen evolution rate of 27.59 mmol g-1 h-1 in benzyl alcohol (10 vol. %) solution under full-spectrum irradiation, along with highest benzaldehyde production rate is 8.32 mmol g-1 h-1. This work provides a promising guideline for incorporating HPW into S-scheme heterojunctions to achieve efficient overall redox reactions.

Temperature-dependent anisotropy variation in quasi-two-dimensional ferromagnetic Cr5Te8

The quasi-two-dimensional ferromagnet Cr5Te8 is a promising material for spintronic devices due to its near-room-temperature Curie temperature (TC), strong magnetic anisotropy, and easily controllable properties. In this study, the anisotropic magnetization of trigonal (T-) Cr5Te8 single crystals is investigated. Our magnetization study reveals that a ferromagnetic transition occurs when the magnetic field is aligned parallel to the c-axis (H//c), while an antiferromagnetic transition appears for H//ab, with a strong perpendicular anisotropy in the ground state. However, electron spin resonance (ESR) spectroscopy indicates that the direction of the easy-axis changes from the c-axis to the ab-plane at TV∼ 190 K as the temperature increases. Furthermore, angle-dependent ESR spectra demonstrate a characteristic of two-dimensional magnetism in the bulk Cr5Te8 single crystal. It is suggested that the temperature-dependent variation in anisotropy is caused by changes in lattice structure through the tuning of the dominant direct-exchange between the intralayers and the super-exchange within the interlayers. The temperature- and field-dependent microwave responses of T-Cr5Te8 are advantageous for the application of this material as a microwave-based spintronic device.