Electron-Muon Ranger Research Articles

The design and construction of the MICE Electron-Muon Ranger

The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter installed in the beam line of the Muon Ionization Cooling Experiment (MICE). The experiment will demonstrate ionization cooling, an essential technology needed for the realization of a Neutrino Factory and/or a Muon Collider. The EMR is designed to measure the properties of low energy beams composed of muons, electrons and pions, and perform the identification particle-by-particle. The detector consists of 48 orthogonal layers of 59 triangular scintillator bars. The readout is implemented using FPGA custom made electronics and commercially available modules. This article describes the construction of the detector from its design up to its commissioning with cosmic data.

Electron-muon ranger: performance in the MICE muon beam

The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100–280 MeV/c.

A totally active scintillator calorimeter for the Muon Ionization Cooling Experiment (MICE). Design and construction

The Electron-Muon Ranger (EMR) is a totally active scintillator detector to be installed in the muon beam of the Muon Ionization Cooling Experiment (MICE) [1] – the main R&D project for the future neutrino factory. It is aimed at measuring the properties of the low energy beam composed of muons, electrons and pions, performing the identification particle by particle. The EMR is made of 48 stacked layers alternately measuring the X- and the Y-coordinate. Each layer consists of 59 triangular scintillator bars. It is shown that the granularity of the detector permits to identify tracks and to measure particle ranges and shower shapes. The read-out is based on FPGA custom made electronics and commercially available modules. Currently it is being built at the University of Geneva.

Silicon photomultipliers for scintillating trackers

In recent years, silicon photomultipliers (SiPMs) have been proposed as a new kind of readout device for scintillating detectors in many experiments. A SiPM consists of a matrix of parallel-connected pixels, which are independent photon counters working in Geiger mode with very high gain (∼106). This contribution presents the use of an array of eight SiPMs (manufactured by FBK-irst) for the readout of a scintillating bar tracker (a small size prototype of the Electron Muon Ranger detector for the MICE experiment). The performances of the SiPMs in terms of signal to noise ratio, efficiency and time resolution will be compared to the ones of a multi-anode photomultiplier tube (MAPMT) connected to the same bars. Both the SiPMs and the MAPMT are interfaced to a VME system through a 64 channel MAROC ASIC.

Tests of the MICE Electron Muon Ranger frontend electronics with a small scale prototype

The MICE experiment is being commissioned at RAL to demonstrate the feasibility of the muon ionization cooling technique for future applications such as the Neutrino Factory and the Muon Collider. The cooling will be evaluated by measuring the emittance before and after the cooling channel with two 4 T spectrometers; to distinguish muons from the background, a multi-detector particle identification system is foreseen: three Time of Flight stations, two Cherenkov counters and a calorimetric system consisting of a pre-shower layer and a fully active scintillator detector (EMR) are used to discriminate muons from pions and electrons. EMR consists of 48 planes of triangular scintillating bars coupled to WLS fibers readout by single PMTs on one side and MAPMTs on the other; each plane sensible area is 1 m 2. This article deals with a small scale prototype of the EMR detector which has been used to test the MAPMT frontend electronics based on the MAROC ASIC; the tests with cosmic rays using both an analog mode and a digital readout mode are presented. A very preliminary study on the cross talk problem is also shown.

Silicon photomultipliers characterization for the EMR prototype of the MICE experiment

The SiPMs are excellent candidates for the replacement of PMTs in many experimental situations. In this article we describe the performances of different types of SiPMs from Hamamatsu and FBK-IRST before and after irradiation with photons and neutrons in terms of signal to noise ratio, time resolution and efficiency. The SiPMs are connected to a scintillation tracker/calorimeter, composed of eight layers ( 4 x and 4 y ) of 10 scintillating bars each and have been tested at the CERN PS T9 beamline. The tracker/calorimeter is a small-size prototype of a bigger detector called EMR (Electron Muon Ranger), a particle identification system developed for the MICE experiment.

The prototype of the MICE Electron–Muon Ranger: Design, construction and test

Muon Ionization Cooling Experiment (MICE) and its goal to demonstrate the feasibility of ionization cooling represent the first step toward a neutrino factory. Muons in MICE are produced by pions which derive from the interaction of protons with a target. Muons being short lived particles, a special cooling procedure has to be developed, to be able to reduce the emittance quickly. MICE intends to measure the emittance value with a 0.1% accuracy before and after the cooling element; thus a detector able to reconstruct and identify individual particles is required. The presence of electrons due to muon decay introduces a systematic error on the emittance and cooling measurements. For this reason a particle identification system is being developed based on a totally active scintillator tracker/calorimeter (Electron–Muon Ranger (EMR)). The detector consists of 40 planes of extruded scintillator bars 1 m long; the bars are read out with 0.8 mm WLS fibers coupled to multianode photomultipliers. The readout segmentation will be chosen accordingly to the rate (600 good muons per 1 ms spill every 1 s). This paper describes the design, construction and test at the CERN PS T9-line of the first small size prototype of the EMR with full analog readout, consisting of eight layers (4 x and 4 y ) with 10 bars 19 cm long each.