Electron-hole Pairs Research Articles

Photocatalytic Performance of the BaSn-based Nanoscale Materials for the Organic Pollutants Enhanced by Sm (Er) Doping

Background: Sm (Er) doping is an effective strategy for enhancing the photocatalytic activity of the semiconductor photocatalysts for the degradation of organic pollutants. BaSnbased nanorods possess wide band gap energy, which limits the photocatalytic application. It is important to research the feasibility of the improved photocatalytic performance of the BaSnbased nanorods by doping with Sm (Er). Objective: The aim is to synthesize Sm (Er)-doped BaSn-based nanoscale materials through a simple hydrothermal process and research the photocatalytic performance of the Sm (Er)-doped BaSn-based nanoscale materials for the gentian violet degradation. Methods: Sm (Er)-doped BaSn-based nanoscale materials with a polycrystalline structure were synthesized through a simple hydrothermal process. The Sm (Er)-doped composites were analyzed by X-ray diffraction, electron microscopy, solid diffuse reflectance spectrum, X-ray photoelectron spectroscopy, photoluminescence, and electrochemical impedance spectroscopy. Results: Sm (Er) doping induces the morphological evolution of the BaSn-based nanoscale materials from the nanorods to irregular nanoscale particles. Sm (Er) in the doped BaSn-based nanoscale materials exists in the form of the cubic Sm2Sn2O7 and orthorhombic ErF3 phases. The band gap value is decreased with increasing the Sm (Er) dopant contents. Sm (Er)-doped BnSnbased nanoscale materials with the Sm (Er) content of 8wt.% have the lowest band gap and show the strongest light absorption ability. Compared with the un-doped BaSn-based nanoscale materials, the Sm (Er)-doped BnSn-based nanoscale materials exhibit higher photocatalytic activity for the gentian violet degradation. 8wt.% Sm-doped BnSn-based nanoscale materials show the highest photocatalytic activity for the degradation of the gentian violet. 20 mL gentian violet solution (concentration of 10 mg·L-1) can be totally degraded using 20 mg 8wt.% Sm-doped BnSnbased nanoscale materials under UV light illumination for 150 min. Conclusion: The enhanced photocatalytic activity of the Sm (Er)-doped BnSn-based nanoscale materials can be attributed to the decreased band gap, enhanced light absorption ability, and decreased recombination of the photo-generated electron-hole pairs.

Coal-based carbon quantum dots modified Ni-MOF and Co/Zr-MOF heterojunctions for efficient photocatalytic hydrogen evolution

NS-CQDs were synthesized by a hydrothermal method using high-sulfur lignite as the carbon source. Modification of Ni-MOF and Co/Zr-MOF using NS-CQDs to explore the performance of composite photocatalysts for hydrogen production. It was found that NS-CQDs significantly enhanced the hydrogen precipitation performance of the composite photocatalysts compared with the MOFs catalysts alone, and the highest hydrogen precipitation rate of the novel composite photocatalyst 5%NS-CQDs/NCZ2 reached 3662.68 μmol·g-1·h-1. It can be inferred from the conduction band and valence band positions of Ni-MOF, Co/Zr-MOF and NS-CQDs that a double S-type heterojunction is formed. The presence of thiophene and pyrrole nitrogen in NS-CQDs can promote electron transport, reduce the rate of electron-hole pair complexation, and improve the hydrogen evolution activity of the 5%NS-CQDs/NCZ2.

Deciphering the Impact of ZnO Nanoparticles and a Sunscreen Product Containing ZnO on Phosphorus Dynamics and Release in Chlorella pyrenoidosa in Aquatic Systems.

Zinc oxide nanoparticles (ZnO NPs) expedite the conversion of organic phosphorus (OP) into PO4-P (Pi), facilitating phosphorus (P) absorption by algae. Our study explored the mechanisms of converting OP (2-aminoethylphosphonic acid (AEP) and β-glycerol phosphate (β-GP)) into Pi in Chlorella pyrenoidosa under P deficiency with sunscreen and ZnO NPs. Cell density followed the order of K2HPO4 > β-GP+ZnO > β-GP > AEP+ZnO > AEP > P-free. ZnO NPs promoted the conversion of β-GP, containing C-O-P bonds (0.028-0.041 mg/L), into Pi more efficiently than AEP, which possesses C-P bonds (0.022-0.037 mg/L). Transcriptomics revealed Pi transport/metabolism (phoB (3.99-12.01 fold), phoR (2.20-5.50 fold), ppa (4.49-10.40 fold), and ppk (2.50-5.40 fold)) and phospholipid metabolism (SQD1 (1.85-2.79 fold), SQD2 (2.60-6.53 fold), MGD (2.13-3.21 fold), and DGD (4.08-7.56 fold)) were up-regulated compared to K2HPO4. 31P nuclear magnetic resonance spectroscopy identified intracellular P as polyphosphate, orthophosphate, and pyrophosphate. Synchrotron radiation-based X-ray near-edge structure spectroscopy indicated that K2HPO4 and Zn3(PO4)2 in β-GP+ZnO were increased by 8.09% and 7.28% compared to AEP+ZnO, suggesting superior P storage in β-GP+ZnO. Overall, ZnO NPs improved photoinduced electron-hole pair separation and charge separation efficiency and amplified the ·OH and ·O2- levels, promoting OP photoconversion into Pi and algae growth.

Single Crystal Perovskite/Graphene Self-Driven Photodetector with Fast Response Speed

Recently, the combination of two-dimensional (2D) materials and perovskites has gained increasing attention in optoelectronic applications owing to their excellent optical and electrical characteristics. Here, we report a self-driven photodetector consisting of a monolayer graphene sheet and a centimeter-sized CH3NH3PbBr3 single crystal, which was prepared using an optimized wet transfer method. The photodetector exhibits a short response time of 2/30 μs by virtue of its high-quality interface, which greatly enhances electron–hole pair separation in the heterostructure under illumination. In addition, a responsivity of ~0.9 mA/W and a detectivity over 1010 Jones are attained at zero bias. This work inspires new methods for preparing large-scale high-quality perovskite/2D material heterostructures, and provides a new direction for the future enhancement of perovskite optoelectronics.

Preparation of SnS2/MoS2 with p–n heterojunction for NO2 sensing

Conventional metal sulfide (SnS2) gas-sensitive sensing materials still have insufficient surface area and slow response/recovery times. To increase its gas-sensing performance, MoS2 nanoflower was produced hydrothermally and mechanically combined with SnS2 nanoplate. Extensive characterization results show that MoS2 was effectively integrated into SnS2. Four different concentrations of SnS2–MoS2 composites were evaluated for their NO2 gas sensitization capabilities. Among them, SnS2–15% MoS2 at 170 °C demonstrated the greatest response values to NO2, 7.3 for 1 ppm NO2, which is about three times greater than the SnS2 sensor at 170 °C (2.58). The creation of pn junctions following compositing with SnS2 was determined to be the primary reason for the composite’s faster recovery time, while the heterojunction allowed for the rapid separation of hole–electron pairs. Because the MoS2 surface has multiple vacancy defects, the adsorption energy of these vacancies is significantly higher than that of other places, resulting in increased NO2 adsorption. Furthermore, MoS2 can serve as active adsorption sites for SnS2 micrometer sheets during gas sensing. This study may help to build new NO2 gas sensors.

Enhanced Photocatalytic Activity of V2C MXene-Coupled ZnO Porous Nanosheets with Increased Surface Area and Effective Charge Transfer

Photocatalysis performs excellently when degrading organic pollutants, but the photocatalytic degradation rate is not high for most photocatalysts due to their narrow sunlight adsorption range and high recombination rate of electron hole pairs. Herein, we use V2C-MXene with a wide sunlight adsorption range to couple ZnO porous nanosheets and form ZnO/MXene hybrids using a facile electrostatic self-assembly method. The ZnO/MXene hybrids acquired demonstrated improved photochemical efficiency in breaking down methylene blue (MB) when contrasted with porous ZnO nanosheets. The degradation rate of MB reached 99.8% under UV irradiation for 120 min after the ZnO/MXene hybrid formation, while 38.6% was attained by the ZnO porous nanosheets. Moreover, photodegradation rate constants (k) were calculated as 3.05 × 10−3 and 5.42 × 10−2 min−1 for ZnO porous nanosheets and ZnO/MXene hybrids, respectively, indicating that the photodegradation performance was enhanced by 17.8 times after the modification of V2C. This was probably because the modification of V2C can increase the specific surface area to provide more sites for MB adsorption, widen the sunlight adsorption range to produce good photothermal effect, and facilitate the transfer of photogenerated carriers in ZnO to promote the reaction of more photogenerated carriers with MB. Hence, this work offers a simple approach to creating effective photocatalysts for breaking down organic contaminants.

Edge-Rich 3D Structuring of Metal Chalcogenide/Graphene with Vertical Nanosheets for Efficient Photocatalytic Hydrogen Production.

Constructing pertinent nanoarchitecture with abundant exposed active sites is a valid strategy for boosting photocatalytic hydrogen generation. However, the controllable approach of an ideal architecture comprising vertically standing transition metal chalcogenides (TMDs) nanosheets on a 3D graphene network remains challenging despite the potential for efficient photocatalytic hydrogen production. In this study, we fabricated edge-rich 3D structuring photocatalysts involving vertically grown TMDs nanosheets on a 3D porous graphene framework (referred to as 3D Gr). 2D TMDs (MoS2 and WS2)/3D Gr heterostructures were produced by location-specific photon-pen writing and metal-organic chemical vapor deposition for maximum edge site exposure enabling efficient photocatalytic reactivity. Vertically aligned 2D Mo(W)S2/3D Gr heterostructures exhibited distinctly boosted hydrogen production because of the 3D Gr caused by synergetic impacts associated with the large specific surface area and improved density of exposed active sites in vertically standing Mo(W)S2. The heterostructure involving graphene and TMDs corroborates an optimum charge transport pathway to rapidly separate the photogenerated electron-hole pairs, allowing more electrons to contribute to the photocatalytic hydrogen generation reaction. Consequently, the size-tailored heterostructure showed a superior hydrogen generation rate of 6.51 mmol g-1 h-1 for MoS2/3D graphene and 7.26 mmol g-1 h-1 for WS2/3D graphene, respectively, which were 3.59 and 3.76 times greater than that of MoS2 and WS2 samples. This study offers a promising path for the potential of 3D structuring of vertical TMDs/graphene heterostructure with edge-rich nanosheets for photocatalytic applications.

Tailored BiPO4/Bi‐MOF heterostructure photocatalysts with diverse morphologies for highly efficient organic pollutant degradation

Three distinct morphologies of Bi‐MOFs were innovatively employed as carriers, facilitating the formation of heterojunctions with BiPO4. Among these, the optimal photocatalytic performance was demonstrated by the type II heterojunction BiPO4/CAU‐17. Bi3+ competitively coordinated to crucially aid CAU‐17's transformation into a heterojunction, enhancing interfacial contact in BiPO4/CAU‐17. These photocatalysts effectively degraded dyes (RhB, MO, MB) and tetracycline (TC) under light exposure. RhB degradation was 3.33 times faster with BiPO4/CAU‐17 than BiPO4, 1.45 times faster than FCAU‐17, 1.36 times faster than FRCAU‐17, and 1.32 times faster than CAU‐17. Analyzing carrier density, Fermi level, and band structure through VB‐XPS, UV–VIS, and Mott–Schottky provided insights into enhanced separation of photoexcited electron–hole pairs. This study presents a novel approach to tackle the aggregation challenge of the wide‐bandgap material BiPO4 by using suitable MOFs as carriers. It offers valuable perspectives for the design and application of photocatalysts in environmental remediation.

Two-Dimensional Electron-Hole Plasma in Colloidal Quantum Shells Enables Integrated Lasing Continuously Tunable in the Red Spectrum.

Combining integrated optical platforms with solution-processable materials offers a clear path toward miniaturized and robust light sources, including lasers. A limiting aspect for red-emitting materials remains the drop in efficiency at high excitation density due to non-radiative quenching pathways, such as Auger recombination. Next to this, lasers based on such materials remain ill characterized, leaving questions about their ultimate performance. Here, we show that colloidal quantum shells (QSs) offer a viable solution for a processable material platform to circumvent these issues. We first show that optical gain in QSs is mediated by a 2D plasma state of unbound electron-hole pairs, opposed to bound excitons, which gives rise to broad-band and sizable gain across the full red spectrum with record gain lifetimes and a low threshold. Moreover, at high excitation density, the emission efficiency of the plasma state does not quench, a feat we can attribute to an increased radiative recombination rate. Finally, QSs are integrated on a silicon nitride platform, enabling high spectral contrast, surface emitting, and TE-polarized lasers with ultranarrow beam divergence across the entire red spectrum from a small surface area. Our results indicate QS materials are an excellent materials platform to realize highly performant and compact on-chip light sources.

Comparative analysis of heavy ions and alpha particles impact on gate-all-around TFETs and gate-all-around MOSFETs

The single-event-transient (SET) effect due to heavy ions and alpha particles irradiation on n-type gate-all-around tunnel field effect transistor (GAA TFET) and n-type gate-all-around MOSFET (GAA MOSFET) has been carried out. Due to differences in carrier injection mechanisms, the generated electron-hole pairs (EHPs) due to high-energy particles (HEPs) act differently on the device. In addition, the impact of HEPs (i.e., heavy ions and alpha particles) on several locations along the channel are analyzed followed by the analysis of different energies of heavy ions and alpha particles irradiation on the device. Further, the impact of varying striking angles of HEPs on the device is also analyzed to get a close match as practically exposed device characteristic. Finally, the bipolar gain of the device has been analyzed which shows GAA TFET device has more immunity toward heavy ions strike and weak immunity toward alpha particle strikes when compared to the GAA MOSFET counterpart.

Surface plasmon resonance-mediated photocatalytic H2 generation.

The limited yield of H2 production has posed a significant challenge in contemporary research. To address this issue, researchers have turned to the application of surface plasmon resonance (SPR) materials in photocatalytic H2 generation SPR, arising from collective electron oscillations, enhances light absorption and facilitates efficient separation and transfer of electron-hole pairs in semiconductor systems, thereby boosting photocatalytic H2 production efficiency. However, existing reviews predominantly focus on SPR noble metals, neglecting non-noble metals and SPR semiconductors. In this review, we begin by elucidating five different SPR mechanisms, covering hot electron injection, electric field enhancement, light scattering, plasmon-induced resonant energy transfer, and photo-thermionic effect, by which SPR enhances photocatalytic activity. Subsequently, a comprehensive overview follows, detailing the application of SPR materials-metals, non-noble metals, and SPR semiconductors-in photocatalytic H2 production. Additionally, a personal perspective is offered on developing highly efficient SPR-based photocatalysis systems for solar-to-H2 conversion in the future. This review aims to guide the development of next-gen SPR-based materials for advancing solar-to-fuel conversion.

Photodetectors Based on ZrS3/MoS2 Heterostructures.

High-performance photodetectors with the detection capability of linearly polarized light have broad applications in both military and civilian fields. Quasi-one-dimensional ZrS3 as an emerging anisotropic two-dimensional material has come under the spotlight owing to its intriguing properties. However, the performance of the ZrS3 photodetector is seriously restricted by its low responsivity. Herein, a novel high-performance photodetector based on the van der Waals ZrS3/MoS2 heterostructure is proposed. Attributed to the charge trapping-assisted photogating effect, interlayer carrier transitions, and fast spatial separation of the photogenerated electron-hole pairs, the device displays superior photoresponse characteristics ranging from the ultraviolet to the visible spectrum in terms of high responsivity up to 212 A/W, an extraordinary external quantum efficiency of 8.5 × 104%, and a prompt rise/decay time of 0.19/0.38 ms. In addition, owing to the profound birefringence and dichroism effects in ZrS3 together with strong light-matter interactions in the heterostructure, profound linear-polarization sensitivity is demonstrated with a dichroic ratio of about 2.8. Overall, this photodetector not only is integrated with the excellent properties of ZrS3 and monolayer MoS2 but also further enhances the advantages through interlayer couplings, which demonstrate the strong potential of the ZrS3-based devices for high-performance, ultrafast, and polarization-sensitive photodetection.

Graphene Quantum Dots as Hole Extraction and Transfer Layer Empowering Solar Water Splitting of Catalyst-Coupled Zinc Ferrite Nanorods.

Despite the narrow band gap energy, the performance of zinc ferrite (ZnFe2O4) as a photoharvester for solar-driven water splitting is significantly hindered due to its sluggish charge transfer and severe charge recombination. This work reports the fabrication of a hybrid nanostructured hydrogenated ZnFe2O4 (ZFO) photoanode with enhanced photoelectrochemical water-oxidation activity through coupling N-doped graphene quantum dots (GQDs) as a hole transfer layer and Co-Pi as a catalyst. The GQDs not only reduce the surface-mediated nonradiative electron-hole pair recombination but also induce a built-in interfacial electric field leading to a favorable band alignment at the ZFO/GQDs interface, helping rapid photogenerated hole separation and serving as a conducting hole transfer highway, improve the hole transportation into the Co-Pi catalyst for enhanced water oxidation reaction kinetics. The optimized ZFO/GQD/Co-Pi hybrid photoanode delivers a 23-fold photocurrent enhancement at 1.23 V versus the reversible hydrogen electrode (RHE) and a significant 360 mV reduction in the onset potential, reaching 0.65 VRHE compared with the ZFO photoanode under 1 sun illumination in a neutral electrolytic environment. This investigation underscores the mechanism of synergistic interplay between the hole transport layer and cocatalyst in boosting the solar-illuminated water-splitting activity of the ZFO photoanode.

A Stimulus-Responsive Ternary Heterojunction Boosting Oxidative Stress, Cuproptosis for Melanoma Therapy.

Cuproptosis, a recently discovered copper-dependent cell death, presents significant potential for the development of copper-based nanoparticles to induce cuproptosis in cancer therapy. Herein, a unique ternary heterojunction, denoted as HACT, composed of core-shell Au@Cu2O nanocubes with surface-deposited Titanium Dioxide quantum dots and modified with hyaluronic acid is introduced. Compared to core-shell AC NCs, the TiO2/Au@Cu2O exhibits improved energy structure optimization, successfully separating electron-hole pairs for redox use. This optimization results in a more rapid generation of singlet oxygen and hydroxyl radicals triggering oxidative stress under ultrasound radiation. Furthermore, the HACT NCs initiate cuproptosis by Fenton-like reaction and acidic environment, leading to the sequential release of cupric and cuprous ions. This accumulation of copper induces the aggregation of lipoylated proteins and reduces iron-sulfur proteins, ultimately initiating cuproptosis. More importantly, HACT NCs show a tendency to selectively target cancer cells, thereby granting them a degree of biosecurity. This report introduces a ternary heterojunction capable of triggering both cuproptosis and oxidative stress-related combination therapy in a stimulus-responsive manner. It can energize efforts to develop effective melanoma treatment strategies using Cu-based nanoparticles through rational design.

Efficient Charge Separation in Ag/PCN/UPDI Ternary Heterojunction for Optimized Photothermal-Photocatalytic Performance via Tandem Electric Fields.

Charge separation driven by the internal electric field is a research hotspot in photocatalysis. However, it remains challenging to accurately control the electric field to continuously accelerate the charge transfer. Herein, a strategy of constructing a tandem electric field to continuously accelerate charge transfer in photocatalysts is proposed. The plasma electric field, interface electric field, and intramolecular electric field are integrated into the Ag/g-C3N4/urea perylene imide (Ag/PCN/UPDI) ternary heterojunction to achieve faster charge separation and longer carrier lifetime. The triple electric fields function as three accelerators on the charge transport path, promoting the separation of electron-hole pairs, accelerating charge transfer, enhancing light absorption, and increasing the concentration of energetic electrons on the catalyst. The H2 evolution rate of Ag/PCN/UPDI is 16.8 times higher than that of pristine PDI, while the degradation rate of oxytetracycline is increased by 4.5 times. This new strategy will provide a groundbreaking idea for the development of high-efficiency photocatalysts.

Enhancing the Visible Light Photocatalytic Activity of TiO2-Based Coatings by the Addition of Exfoliated g-C3N4

In the last few years, increasing interest from researchers and companies has been shown in the development of photocatalytic coatings for air purification and self-cleaning applications. In order to maintain the photocatalyst’s concentration as low as possible, highly active materials and/or combinations of them are required. In this work, novel photocatalytic formulations containing g-C3N4/TiO2 composites were prepared and deposited in the form of coatings on a-block substrates. The obtained photocatalytic surfaces were tested for NOx and acetaldehyde removal from model air. It was found that the addition of only 0.5 wt% g-C3N4 towards TiO2 content results in over 50% increase in the photocatalytic activity under visible light irradiation in comparison to pure TiO2 coating, while the activity under UV light was not affected. The result was related to the creation of a g-C3N4/TiO2 heterojunction that improves the light absorption and the separation of photogenerated electron-hole pairs, as well as to the inhibition of TiO2 particles’ agglomeration due to the presence of g-C3N4 sheets.

Ultrasound-Triggered Piezoelectric Catalysis of Zinc Oxide@Glucose Derived Carbon Spheres for the Treatment of MRSA Infected Osteomyelitis.

Currently, methicillin-resistant Staphylococcus aureus (MRSA)-induced osteomyelitis is a clinically life-threatening disease, however, long-term antibiotic treatment can lead to bacterial resistance, posing a huge challenge to treatment and public health. In this study, glucose-derived carbon spheres loaded with zinc oxide (ZnO@HTCS) are successfully constructed. This composite demonstrates the robust ability to generate reactive oxygen species (ROS) under ultrasound (US) irradiation, eradicating 99.788% ± 0.087% of MRSA within 15min and effectively treating MRSA-induced osteomyelitis infection. Piezoelectric force microscopy tests and finite element method simulations reveal that the ZnO@HTCS composite exhibits superior piezoelectric catalytic performance compared to pure ZnO, making it a unique piezoelectric sonosensitizer. Density functional theory calculations reveal that the formation of a Mott-Schottky heterojunction and an internal piezoelectric field within the interface accelerates the electron transfer and the separation of electron-hole pairs. Concurrently, surface vacancies of the composite enable the adsorption of a greater amount of oxygen, enhancing the piezoelectric catalytic effect and generating a substantial quantity of ROS. This work not only presents a promising approach for augmenting piezoelectric catalysis through construction of a Schottky heterojunction interface but also provides a novel, efficient therapeutic strategy for treating osteomyelitis.

CuO nanoflowers: Multifaceted implications of various precipitating agents on rectification behaviour

In order to achieve the best possible use of traditional energy resources for the preservation of the environment, semiconductor-based optoelectronic devices are one of the most intriguing methods for converting light energy into electrical energy. CuO has been extensively explored as a material for energy conversion and the development of photo-detectors due to its notable characteristics among other metals, especially its non-toxicity, abundance, high efficiency, electrochemical stability and low cost/promising photodiode. However, some drawbacks limit its practical application in white light and photo-detector, including the rapid recombination rate of photo-generated electron-hole pairs and destitute response to visible light. As a result, several strategies have been developed from an optoelectronics perspective to eradicate these deficiencies and make an effort to enhance CuO photodiode activities. In this research work, the electrical characteristics and rectification behaviour of CuO with various precipitating agents have been examined. The CuO nanoparticles can be synthesized by co-precipitation technique prepared with different precipitants. Through this research, several parameters, such as the structural, functional, morphological, optical and electrical characteristics, were investigated by changing the precipitants. The functional group formation of pure CuO phase was confirmed by FT-IR studies. UV–Vis absorption measurements indicate that the band gap of the CuO nanoparticles was ranging from 2.40 to 2.85 eV. As a diode, CuO/p-Si exhibits a non-ideal behaviour and under light conditions with Na2CO3 precipitant, the better ideality factor is about 2.35. The barrier height is determined by the thermionic emission theory to be 0.77 and 0.79 eV in the dark and light conditions respectively.

Enhanced optical and electrochemical properties of FeBTC MOF modified TiO2 photoanode for DSSCs application

In this work, iron based 1, 3, 5-tricarboxylic acid (FeBTC) was prepared via microwave-assisted method and incorporated into TiO2 via ultrasonic assisted method. The TiO2–FeBTC nanocomposites were characterized by XRD, FTIR, Raman, BET, FESEM, HRTEM, TGA, UV‒vis DRS and PL to understand their crystallographic, surface morphology, and optical characteristics. The Raman spectra showed a blue shift of Eg, A1g, and B1g peaks upon incorporation of FeBTC MOF onto TiO2. HRTEM and XRD analysis confirmed a mixture of TiO2 nanospheres and hexagonal FeBTC MOF morphologies with high crystallinity. The incorporation of FeBTC onto TiO2 improved the surface area as confirmed by BET results, which resulted in improved absorption in the visible region as a results of reduced bandgap energy from 3.2 to 2.84 eV. The PL results showed a reduced intensity for TiO2–FeBTC (6%) sample, indicating improved separation of electron hole pairs and reduced recombination rate. After fabrication of the TiO2–FeBTC MOF photoanode, the charge transfer kinetics were enhanced at TiO2–FeBTC MOF (6%) with Rp value of 966 Ω, as given by EIS studies. This led to high performance due to low charge resistance. Hence, high power conversion efficiency (PCE) value of 0.538% for TiO2–FeBTC (6%) was achieved, in comparison with other loadings. This was attributed to a relatively high surface area which allowed more charge shuttling and thus better electrical response. Conversely, upon increasing the FeBTC MOF loading to 8%, significant reduction in efficiency (0.478%) was obtained, which was attributed to sluggish charge transfer and fast electron–hole pair recombination rate. The TiO2–FeBTC (6%) may be a good candidate for use in DSSCs as a photoanode materials for improved efficiency.

Modified metal–organic frameworks for sonophotocatalytic elimination of wastewater pollutants

In recent decades, people have witnessed a rapid development of society, accompanied by the increase sharply of numerous organic/inorganic contaminants from industrial effluents. The high toxicity of pollutants has led to long‐term risk to human health. To connect with environment‐friendly green chemistry and sustainable development, photocatalysis technology has emerged. Metal–organic framework (MOF)‐based photocatalysts performed high efficiency for the elimination of wastewater pollutants. Nevertheless, the large band gap energy and high recombination rate of photogenerated electron–hole pair decrease the catalytic efficiency. Sonochemistry is regarded as a safe, highly efficient, clean, and eco‐friendly technology, which has aroused a lot of interest in the treatment of wastewater. The cavitation effect induced by ultrasonic waves promotes the generation of additional active radicals. The ultrasonic oscillation facilitates cleaning the surface of catalysts, dispersing catalyst particles, and increasing proton transport. Therefore, photocatalysis coupling with ultrasonic waves, known as sonophotocatalysis (SPC), is a promising means for enhancing the overall performance of wastewater treatments. This review discusses the recent advancements of hybrid MOF‐based photocatalysts driving the wastewater treatments in SPC system. The catalytic performance of hybrid MOF is discussed in the SPC process. The inner properties of phases in hybrid MOF such as the location of redox potential and transfer direction of electrons and energy after hybridization are elucidated. Additionally, the review discusses the existing challenges and obstacles of MOF‐based SPC system and proposes feasible improvements to meet the future requirements of practical applications.