Electron Donor Research Articles

Visible light induced reactions of quinones

AbstractThis review covers the visible light induced reactions of quinones such as benzoquinone, naphthoquinone, and anthraquinone. These quinones are distinguished by their fully conjugated structures, which feature minimal energy gaps, and nonbonding electron pairs on the oxygen atoms. Such structural attributes facilitate np → π* transition, allowing for easy access to excited states and rendering quinones highly reactive under visible‐light irradiation. We describe three primary types of reactions facilitated by these electronic characteristics: Paternò–Büchi (PB) reactions, which entail [2 + 2] photocycloaddition between the carbonyl groups of quinones and alkenes or alkynes; CH activation processes, which showcase quinones' versatility in functionalizing hydrocarbons; and the formation of electron donor–acceptor complexes, demonstrating quinones' capability to engage in charge transfer interactions. Through this review, we highlight the critical role quinones play in photochemistry, their unique electronic properties, and their broad applicability in synthetic organic chemistry.

Interfacial Assembly of Peptide Carbon Dot Hybrids Enables Photoinduced Electron Transfer with Improved Photoresponse.

Assemblies at the interface represent a powerful tool for integrating organic and inorganic components into hybrid nanostructures. Carbon dots are both excellent electron donors and acceptors, offering opportunities for their potential uses in light-harvesting applications. To further improve their functions, integration of acceptor carbon dots into donor organic nanostructures is of great interest for improving photophysical properties useful for photoinduced electron transfer. Here, a one-step protocol for the interfacial assembly of a two-component hybrid consisting of carbon dots and perylene containing an l-phenylalanine-based dipeptide through noncovalent bonding is developed. The perylene-containing dipeptide derivative formed micrometer-long nanofibers on the water surface through J-aggregate formation. Spectroscopic studies reveal photoluminescence quenching of the donor dipeptide upon increasing the concentration of acceptor carbon dots in the hybrid, suggesting photoinduced electron transfer from the donor peptides to acceptor carbon dots. The hybrids integrated in a planar device architecture show a significantly improved photoresponse because of the favorable interactions between the donor-acceptor components. The one-step integration of donor-acceptor hybrids on the water surface offers opportunities for light harvesting and related applications.

Isoreticular Squaraine-Linked Titanium-Organic Frameworks for Photocatalytic Water Splitting to Hydrogen Under Visible Light.

Inspired by the excellent photocatalytic activity of TiO2, titanium metal-organic frameworks (Ti-MOFs) with broad absorption of visible light are regarded as promising photocatalysts, but carboxylate-linkers used in them are mainly limited to the large extended π-electron systems. Developing Ti-MOFs using organic linkers with a donor-acceptor-donor (D-A-D) structure is expected to improve their charge separation but is still challenging. Herein the design of two new isoreticular Ti-MOFs, Ti6-SQ1 and Ti6-SQ2 are reported, by using squaraines bearing different electron donors as organic linkers. Discrete fourier transform (DFT) calculations demonstrate that ligand-to-metal charge transfer (LMCT) from the acceptor units of squaraines to the Ti6-oxo secondary building units (SBUs) drives the photocatalytic water splitting to hydrogen reaction. Compared with Ti6-SQ2, the shorter distance between the squaraine centers and the Ti6-oxo SBUs in Ti6-SQ1 makes stronger LMCT, showing higher photocatalytic hydrogen evolution efficiency of 11.5mmol g-1h-1 under visible light (λ > 420nm), which is ≈8 times that of Ti-based MOF photocatalysts reported so far. This work provides a new strategy to design Ti-MOF photocatalysts and understand their structure-property relationship.

Adaptation mechanisms of Alcanivorax facilitating its predominance in marine environments

IntroductionAlcanivorax, a typical alkane-degrading bacterium, has demonstrated the ability to utilize inorganic electron donor in some reports. However, a comprehensive analysis of its potentiality to utilize inorganic electron donor is still lacking.MethodsIn this study, genomic and phylogenetic analyzes were used to explore the potential oxidative capacity of inorganic compounds in Alcanivorax. And its functions were verified through physiological experiments.ResultsThe sulfur oxidation-related genes sqr and tsdA are prevalent and have various evolutionary origins. Potential genes for CO oxidation were present in 39 strains, whereas genes associated with iron, hydrogen, and ammonia oxidation were either rare or absent. The physiological functions of Sqr and TsdA were confirmed in six representative strains under heterotrophic conditions. Adding thiosulfate enhanced Alcanivorax growth. However, Alcanivorax bacteria perform sulfide detoxification through Sqr rather than by gaining energy via sulfide oxidation Although no strain was confirmed to be chemoautotrophs, we discovered that the two clades, A. xenomutans and A. profundimaris, can grow under conditions with very low organic matter.DiscussionThe ability to utilize inorganic compounds as a supplementary energy source and adapt to carbon oligotrophic growth may contribute to the prevalence of Alcanivorax in marine ecosystems.

The Photodynamic Agent Designed by Involvement of Hydrogen Atom Transfer for Enhancing Photodynamic Therapy.

Although Type-I photodynamic therapy has attracted increasingly growing interest due to its reduced dependence on oxygen, the design of effective Type-I photosensitizers remains a challenge. In this work, we report a design strategy for Type-I photosensitizers by the involvement of hydrogen atom transfer (HAT). As a proof of concept, a HAT-involved Type-I PS, which simultaneously generates superoxide and carbon-centered radicals under light-irradiation, was synthesized. This photosensitizer is comprised of a fluorene-substituted BODIPY unit as an electron acceptor covalently linked with a triphenylamine moiety as an electron donor. Under light-irradiation, photo-induced intramolecular electron transfer occurs to generate the BODIPY anion radical and triphenylamine cation radical. The former transfers electrons to oxygen to generate O2 -⋅, while the latter loses a proton to produce a benzyl carbon-centered radical which is well characterized. The resulting carbon-centered radicals efficiently oxidize NADH by HAT reaction. This photosensitizer demonstrates remarkable photocytotoxicity even under hypoxic conditions, along with outstanding in vivo antitumor efficacy in mouse models bearing HeLa tumors. This work offers a novel strategy for the design of Type-I photosensitizers by involvement of HAT.

The Photodynamic Agent Designed by Involvement of Hydrogen Atom Transfer for Enhancing Photodynamic Therapy

AbstractAlthough Type‐I photodynamic therapy has attracted increasingly growing interest due to its reduced dependence on oxygen, the design of effective Type‐I photosensitizers remains a challenge. In this work, we report a design strategy for Type‐I photosensitizers by the involvement of hydrogen atom transfer (HAT). As a proof of concept, a HAT‐involved Type‐I PS, which simultaneously generates superoxide and carbon‐centered radicals under light‐irradiation, was synthesized. This photosensitizer is comprised of a fluorene‐substituted BODIPY unit as an electron acceptor covalently linked with a triphenylamine moiety as an electron donor. Under light‐irradiation, photo‐induced intramolecular electron transfer occurs to generate the BODIPY anion radical and triphenylamine cation radical. The former transfers electrons to oxygen to generate O2−⋅, while the latter loses a proton to produce a benzyl carbon‐centered radical which is well characterized. The resulting carbon‐centered radicals efficiently oxidize NADH by HAT reaction. This photosensitizer demonstrates remarkable photocytotoxicity even under hypoxic conditions, along with outstanding in vivo antitumor efficacy in mouse models bearing HeLa tumors. This work offers a novel strategy for the design of Type‐I photosensitizers by involvement of HAT.

Novel Inorganic‐Organic Dual‐Photosensitizing Dinuclear‐Metal Self‐Assembly System for Efficient Artificial Photosynthesis without Sacrificial Electron Donors

AbstractOwing to the unique synergistic effect, dinuclear‐metal‐molecule‐catalysts (DMCs) show excellent performance in catalytic fields. However, for overall photocatalytic CO2 reaction (CO2RR), it is still a challenge to construct well‐matched photosensitizer (PS) components for DMCs‐based photocatalysts. Inorganic‐quantum‐dot PS possesses capacities of multiple exciton generation and catalyzing water oxidation but is incompatible with DMCs. In contrast, organic PS can be covalently linked with DMCs but inescapable of using sacrificial electron donors. For overall photocatalytic CO2RR, organic–inorganic dual‐photosensitizing system might be a promising candidate. Herein, we employed covalent‐linking and electrostatic‐driven approaches to construct the self‐assembly of pyrene‐sensitized Co2L DMCs (Py‐Co2L) and perovskite (PVK) quantum dots, i.e., PVK@[Py‐Co2L]. Using H2O as an electron donor, PVK@[Py‐Co2L] realized 105.24 μmol ⋅ g−1⋅h−1 CO yield in photocatalytic CO2RR, much higher than PVK (15.44 μmol ⋅ g−1⋅h−1) and PVK@Co2L (32.30 μmol ⋅ g−1 ⋅ h−1), ascribing to the efficient photogenerated charge separation and transfer. The experimental results and theoretical investigations demonstrated that the pyrene linked on Co2L boosted the electron delivery from PVK to DMCs. Besides, this strategy could also be extended to the photocatalytic H2 evolution coupled with alcohol oxidation. As a proof‐of‐concept, our work lightens the integration of DMCs, organic and inorganic PS components, promoting the development of photocatalysis without sacrificial electron donors.

Graphene Oxide-Doped Indium Oxide Buffer Film Sandwiched between Titanium Oxide Layers for the Development of Photosensitive Resistive Memory Devices.

Over the past decade, metal oxide semiconductors have attracted considerable attention because of their transparency, high intrinsic charge carrier mobility, and charge carrier density. Metal oxide semiconductors also provide a promising route to develop resistive memory devices because of the tunability of their conductivity via the removal of oxygen ions, forming oxygen vacancies that can act as electron donors. Here, this paper reports the fabrication of a resistive random-access memory (ReRAM) device with TiO2 and TiO2-x layers and introduces a solution-processed In2O3-graphene oxide (GO) buffer layer from a water-based precursor solution to tune the switching characteristics. The devices were compared with a ReRAM device with no buffer layer, and the device composition was optimized by tuning the GO concentration in the layers. The devices showed hysteresis under cyclically scanned bias between positive and negative voltages with clear switching between the low resistance state (LRS) and the high resistance state (HRS). The optimized device also showed a more than 3 orders of magnitude difference in resistance between the LRS and HRS and a stable current retention. The devices also showed photoresponsive behaviors. In the LRS, the current increased significantly under illumination, while in the HRS, the current deteriorated slowly when constantly illuminated. These results highlight the dual role of the GO flakes in the buffer layer by increasing the resistance in the HRS and providing a photoresponsive switching capability. The ReRAM device was connected to a TFT device, and its feasibility as a memory component in a digital circuit was successfully demonstrated. These results provide a new avenue for developing metal-oxide-based ReRAM devices with GO-containing active layers.

Stereoselective Radical Acylfluoroalkylation of Bicyclobutanes via N-Heterocyclic Carbene Catalysis.

Cyclobutanes are prominent structural components in natural products and drug molecules. With the advent of strain-release-driven synthesis, ring-opening reactions of bicyclo[1.1.0]butanes (BCBs) provide an attractive pathway to construct these three-dimensional structures. However, the stereoselective difunctionalization of the central C-C σ-bonds remains challenging. Reported herein is a covalent-based organocatalytic strategy that exploits radical NHC catalysis to achieve diastereoselective acylfluoroalkylation of BCBs under mild conditions. The Breslow enolate acts as a single electron donor and provides an NHC-bound ketyl radical with appropriate steric hindrance, which effectively distinguishes between the two faces of transient cyclobutyl radicals. This operationally simple method tolerates various fluoroalkyl reagents and common functional groups, providing a straightforward access to polysubstituted cyclobutanes (75 examples, up to >19:1 d.r.). The combined experimental and theoretical investigations of this organocatalytic system confirm the formation of the NHC-derived radical and provide an understanding of how stereoselective radical-radical coupling occurs.

Modification of cobalt bis(dicarbollide) ions with nitrile groups on carbon atoms: a unique low-temperature skeletal rearrangement due to the specific electron-donor character of CN substitution.

Herein, we report on the synthesis and stereochemistry of mono- and isomeric dinitrile derivatives of [(1,2-C2B9H11)2-3,3'-Co]- ions. The shape and electronic properties of CN groups can apparently surmount the strain associated with the substitution of two vicinal carbon positions. Owing to electron donation to the cage, this results in a substituent-induced rearrangement of one of the carbon atoms to the upper pentagonal ring. The molecular structure of this isomer was confirmed using sc-XRD and DFT chemical computations.

Bioleaching of lithium from jadarite, spodumene, and lepidolite using Acidiothiobacillus ferrooxidans

Lithium (Li) is becoming increasingly important due to its use in clean technologies that are required for the transition to net zero. Although acidophilic bioleaching has been used to recover metals from a wide range of deposits, its potential to recover Li has not yet been fully explored. In this study, we used a model Fe(II)- and S-oxidising bacterium, Acidiothiobacillus ferrooxidans (At. Ferrooxidans), to extract Li from three different minerals and kinetic modelling to predict the dominant reaction pathways for Li release. Bioleaching of Li from the aluminosilicate minerals lepidolite (K(Li,Al)3(Al,Si,Rb)4O10(F,OH)2) and spodumene (LiAl(Si2O6)) was slow, with only up to 14% (approximately 12 mg/L) of Li released over 30 days. By contrast, At. ferrooxidans accelerated Li leaching from a Li-bearing borosilicate clay (jadarite, LiNaB3SiO7OH) by over 50% (over 120 mg/L) in 21 days of leaching, and consistently enhanced Li release throughout the experiment compared to the uninoculated control. Biofilm formation and flocculation of sediment occurred exclusively in the experiments with At. ferrooxidans and jadarite. Fe(II) present in the jadarite-bearing clay acted as an electron donor. Chemical leaching of Li from jadarite using H2SO4 was most effective, releasing approximately 75% (180 mg/L) of Li, but required more acid than bioleaching for pH control. Kinetic modelling was unable to replicate the data for jadarite bioleaching after primary abiotic leaching stages, suggesting additional processes beyond chemical leaching were responsible for the release of Li. A new crystalline phase, tentatively identified as boric acid, was observed to form after acid leaching of jadarite. Overall, the results demonstrate the potential for acidophilic bioleaching to recover Li from jadarite, with relevance for other Li-bearing deposits.

Unlocking the Potential of Push-Pull Pyridinic Photobases: Aggregation-Induced Excited-State Proton Transfer.

The pH effect on the photophysics of three push-pull compounds bearing dimethoxytriphenylamine (TPA-OMe) as electron donor and pyridine as electron acceptor, with different ortho-functionalization (-H, -Br, -TPA-OMe), is assessed through steady-state and time-resolved spectroscopic techniques in DMSO/water mixed solutions and in water dispersions over a wide pH range. The enhanced intramolecular charge transfer upon protonation of the pyridineleads to the acidochromic (from colorless to yellow) and acido(fluoro)chromic (from cyan to pink) behaviours of the investigated compounds. In dilute DMSO/buffer mixtures these molecules exhibited low pKa values (≤ 3.5) and short singlet lifetimes. Nevertheless, it is by exploiting the aggregation phenomenon in aqueous environment that the practical use of these compounds largely expands: i) the basicity increases (pKa ≈ 4.5) approaching the optimum values for pH-sensing in cancer cell recognition; ii) the fluorescence efficiencies are boosted due to Aggregation-Induced Emission (AIE), making these compounds appealing as fluorescent probes; iii) longer singlet lifetimes enable Excited-State Proton Transfer, paving the way for the application of these molecules as photobases (pKa* = 9.1). The synergy of charge and proton transfers combined to the AIE behaviour in these pyridines allows tunable multi-responsive optical properties providing valuable information for the design of new light-emitting photobases.

Iron Oxide Clusters as Electron Donors Under Light Enhance Oxygen Reduction Kinetics at Atomically Dispersed Fe for Photocatalytic CH4 Partial Oxidation

AbstractPhotocatalytic CH4 oxidation to CH3OH emerges as a promising strategy to sustainably utilize natural gas and mitigate the greenhouse effect. However, there remains a significant challenge for the synthesis of methanol by using O2 at low temperature. Inspired by the catalytic structure in soluble methane monooxygenase (MMO) and the corresponding reaction mechanism, we prepared a biomimetic photocatalyst with the decoration of Fe2O3 nanoclusters and satellite Fe single atoms immobilized on carbon nitride. The catalyst demonstrates an excellent CH3OH productivity of 5.02 mmol ⋅ gcat−1 ⋅ h−1 with CH3OH selectivity of 98.5 %. Mechanism studies reveal that the synergy between Fe2O3 nanoclusters and Fe single atoms establishes a dual‐Fe site as MMO for O2 activation and subsequent CH4 partial oxidation. Moreover, the light excitation of Fe2O3 nanoclusters with a relative narrow band gap could deliver the electrons and protons to atomic Fe that facilitating the oxygen reduction kinetics for the robust of CH3OH synthesis.

Sulfur-based mixotrophic denitrification: A promising approach for nitrogen removal from low C/N ratio wastewater.

Sulfur-based mixotrophic denitrification has significant potential as a promising denitrification technology for treating low ratio of carbon-to‑nitrogen (C/N) wastewater. This paper provided an in-depth and comprehensive overview of the sulfur-based mixotrophic denitrification process and discussed the underlying mechanisms and functional microorganisms. Possible electron transfer pathways involved in the sulfur-based mixotrophic denitrification process are also analyzed in detail. This review focused on the various sulfur-based electron donors used in the sulfur-based mixotrophic denitrification process, including S0, S2-, S2O32-, and pyrite (FeS2), and their performances when combined with various carbon sources (such as methanol, ethanol, glucose, and woodchips) were also explored. The analysis of the contribution proportion between autotrophic and heterotrophic denitrification suggested an appropriate C/N ratio can emphasize the dominance of autotrophs, thus exerting synergistic effects and reducing the consumption of carbon sources. Additionally, three strategies, including developing new composites, new bioreactors, and new sulfur sources, were proposed to improve the performance and stability of the sulfur-based mixotrophic denitrification process. Finally, the applications (such as secondary effluent, groundwater, and agricultural/urban storm water runoff), challenges, and perspectives of the sulfur-based mixotrophic denitrification were highlighted. This review provided an in-depth insight into the coupling mechanism of sulfur-based autotrophic and heterotrophic denitrification and guidance for the future implementation of the sulfur-based mixotrophic denitrification process.

Molecular models of PM6 for non-fullerene acceptor organic solar cells: How DAD and ADA structures impact charge separation and charge recombination.

The quadrupole moment of a non-fullerene acceptor (NFA) generated by the constituent electron donor (D) and acceptor (A) units is a significant factor that affects the charge separation (CS) and charge recombination (CR) processes in organic photovoltaics (OPVs). However, its impact on p-type polymer domains remains unclear. In this study, we synthesized p-type molecules, namely acceptor-donor-acceptor (ADA) and donor-acceptor-donor (DAD), which are components of the benchmark PM6 polymer (D: benzodithiophene and A: dioxobenzodithiophene). Planar heterojunction films, a model of bulk heterojunction, were prepared using ADA, DAD, and PM6 as the bottom p-type layers and Y6 NFA as the top n-type layer. Flash-photolysis time-resolved microwave conductivity, femtosecond transient absorption spectroscopy, and quantum mechanical calculations were employed to probe the charge carrier dynamics. Our findings reveal that while the subtle difference in quadrupole moment and energy gradient of the p-type materials has a minimal influence on CS, the molecular type (ADA or DAD) significantly affects the bulk CR. This study expands the understanding of how the p-type component and its conformation at the p/n interface impact the CS and CR in OPVs, highlighting the critical role of molecular donors in optimizing device performance.

Modulating the Competition between Different Atoms to Form Halogen Bonds.

I and Br atoms are placed on opposite ends of a n-butyl group, with each allowed to form a halogen bond (XB) with NH3. DFT calculations show that the intrinsic preference of the nucleophile for the heavier I over Br can be reversed by the proper placement of substituents on the alkyl chain. A similar reversal occurs for NH2 and OH groups on the alkyl chain, where substituents make the O a better electron donor than N in an XB to an electrophilic ICCH. The highly mobile π-electron cloud of an aromatic ring makes such reversals much more difficult when the pair of competing atoms are placed on, or within, such a ring.

Potential of epicatechin as antioxidant and antiaging in UV-induced BJ cells by regulating COL1A1, FGF-2, GPX-1, and MMP-1 gene, protein levels, and apoptosis

Background Oxidative stress caused by exposure to ultraviolet (UV) light on the skin can damage deoxyribonucleic acid (DNA) and cause keratinocytes to undergo apoptosis. Endogenous antioxidants which play a role in trapping free radicals are also unable to overcome excess reactive oxygen species (ROS) in the body due to UV exposure, so exogenous antioxidants are needed. Polyphenolic compounds extracted from natural ingredients such as flavonoids, quercetin, and epicatechin have quite strong antioxidant activity. This is influenced by the chemical structure of these compounds which are rich in hydroxyl groups and aromatic groups. This structure allows the compound to become an electron donor so that it can neutralize free radicals. In vitro research was used to see the potential effectiveness of epicatechin as an antiaging and antioxidant. The study aims to confirm the potential of epicatechin as an antiaging by in vitro assay. Methods The viability test of epicatechin on human skin fibroblast (BJ) cells was carried out using the water-soluble tetrazolium (WST) assay. BJ cells were UV-induced as a cell model of premature aging. Epicatechin 6.25, 12.5, and 25 µg/mL were administered to UV-induced BJ cells. The gene expression of Collagen I Alpha 1 (COL1A1), matrix metalloproteinase-1 (MMP-1), fibroblast growth factor-2 (FGF-2), and glutathione peroxidase-1 (GPX-1) were analyzed by quantitative real-time polymerase chain reaction (qRT-PCR). Elastin (ELN), hyaluronidase (HAase), cyclooxigenase-2 (COX-2), 8-hydroxydeoxyguanosine (8-OhdG), and melatonin (MT) protein levels were analyzed by enzyme-linked immunosorbent assay (ELISA). The apoptosis of BJ cells was analyzed using flow cytometry. Results Treatment with epicatechin increased relative gene expression including COL1A1 (5.94), FGF-2 (8.34), and GPX-1 (8.09), and also decreased MMP-1 (2.90) relative gene expression compared to the UV-induced BJ cells. Epicatechin also increased levels of ELN (107.7 ng/mg protein) and MT (830 ng/mg protein) levels compared to the UV-induced BJ cells. Epicatechin treatment decreased levels of HAase (505.96 ng/mg protein), COX-2 (33.69 ng/mg protein), and 8-OHdG (97.87 ng/mg protein) compared to the UV-induced BJ cells. Epicatechin also succeeded in maintaining the percentage of live cells and reducing apoptosis, necrotic of UV-induced skin fibroblast cells. Conclusions Epicatechin has the potential to be an antiaging agent by in vitro assay.

Electron-Donor-Mediated Divergent Transformation of Br-RF via EDA Complex for the Synthesis of Fluorine-Containing Oxindoles and Amides.

We have developed an unprecedented electron-donor-controlled divergent reaction between N-alkylsulfonylated acrylamides and Br-RF, facilitated by an electron donor-acceptor (EDA) complex, for the synthesis of fluorine-containing oxindoles and amides. Key to this divergent transformation is the EDA complex generation by altering electron donors. This approach has several advantages, such as broad substrate scope, being metal-catalyst- and photocatalyst-free, and having good functional group tolerance.

Red‐Light Photocatalytic Activation Of Pt(IV) Anticancer Prodrugs Using Methylene Blue

Catalysis‐based approaches offer versatile strategies for activating anticancer prodrugs, potentially allowing precise control over drug release and localization within tumor tissues, while reducing systemic toxicity. In this study, we explore the role of the phenothiazine dye methylene blue (MB+) as a photocatalyst in conjunction with biologically relevant electron donors to facilitate the red‐light conversion of two Pt(IV) complexes, denoted as cis,cis,trans‐[PtCl2(NH3)2(O2CCH2CH2COOH)2] (1) and trans‐[Pt(O2CCH2CH2COOH)21R,2R‐(DACH)(ox)] (2), into cisplatin and oxaliplatin, respectively. Combining spectroscopic techniques (NMR, UV‐Vis, flash photolysis) with computational methods, we reveal that the doubly reduced MB+ (leucomethylene blue, LMB) triggers the reductive elimination of axial ligands in the two Pt(IV) precursors, generating the corresponding Pt(II) anticancer drugs. In vitro experiments conducted on the human cervical cancer cell line CaSki, which harbors multiple copies of the integrated HPV‐16 genome, and on non‐tumoral cells (HaCat) demonstrate that co‐administration with Pt(IV) prodrugs improves MB+'s antiproliferative efficacy in cancer cells, particularly under red light exposure. This enhancement could be attributed to the catalytic production of Pt(II) species within the cellular environment.

Mechanism insights and experimental feasibility of using boron nitride nanocones for rapid adsorption and degradation of SF6 decomposition compounds

Gas-insulated switchgear (GIS) employs sulfur hexafluoride (SF6) as an insulating medium to shield electrical gadget. However, SF6 can decompose under sure situations, generating dangerous sulfur-based totally compounds which include SO2, SOF2, and SO2F2. These byproducts pose enormous dangers to both protection and environmental integrity. Efficiently adsorbing and disposing of those compounds is critical for ensuring operational reliability and reducing environmental dangers. This study investigates the adsorption and degradation mechanisms of SF₆ decomposition compounds (SO₂, SOF₂, and SO₂F₂) on boron nitride nanocones (BNNCs) using density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. Our comprehensive analysis covers five distinct systems, exploring individual and combined adsorption scenarios. The findings reveal that the apex of BNNCs plays a crucial role in the adsorption process, showing high efficiency in adsorbing SO₂ (adsorption energy − 1.22 eV) and facilitating the catalytic breakdown of SOF₂ (adsorption energy − 1.57 eV). The positively charged potential at the nanocone’s apex significantly influences the dissociation and subsequent adsorption of fluorine atoms, with an energy barrier for F dissociation at the apex (1.8 kcal/mol) much lower than at the sidewall (5.3 kcal/mol). In gas mixtures, SO₂ preferentially binds to the apex region of BNNCs, with a bond length of approximately 1.38 Å. BNNCs demonstrate superior adsorption capabilities for SO₂ and SOF₂ compared to other boron nitride nanostructures, with adsorption energies up to 89% higher. The electron transfer analysis reveals that BNNC complexes act as potent electron donors, particularly in the case of BNNC@3SO₂F₂. Additionally, BNNCs show significant potential as sensors for detecting SO₂F₂, with a rapid recovery time of 4.67 ps and a notable decrease in the Fermi level energy to -4.97 eV upon adsorption. The study also provides insights into the angular distribution and charge density difference profiles, offering a detailed understanding of the adsorption mechanisms. These findings have important implications for improving the safety and efficiency of gas-insulated switchgear (GIS) and contribute to the development of more effective environmental protection solutions in electrical power systems.