Electron Cooling System Research Articles

Space Charge of an Electron Beam in an Electron Cooling System

Space Charge of an Electron Beam in an Electron Cooling System

Magnet Design of the Electron Cooling System for HIAF

The electron cooling technology is applied in the spectrometer ring (SRing) to improve the luminosity of ion beam for the High Intensity heavy-ion Accelerator Facility (HIAF). The electron cooler consists of a gun section, two 90-degree toroids, a cooling section and a collector section. There are four kinds of main coils used to provide longitudinal magnetic fields along the path of the electron beam. In this paper, we present the modeling and analyzing of the electron cooler magnets by three-dimension software. The optimizing of the magnetic field of cooling section is completed to achieve the required effective cooling length. The magnetic fields along the electron beam path and ion beam path are calculated and the beam trajectory of typical ion is also simulated to offer data for correcting the orbit.

Space-Charge Waves in the Electron Beam of the Electron Cooling System of the NICA Booster

Space-Charge Waves in the Electron Beam of the Electron Cooling System of the NICA Booster

Profile Monitor for Electron Beam in the High-Voltage Electron Cooling System of the COSY Synchrotron

Profile Monitor for Electron Beam in the High-Voltage Electron Cooling System of the COSY Synchrotron

An AI-based Digital Twin Case Study in the MRO Sector

In this work, the concept of an Artificial Intelligence-based (AI) Digital Twin (DT) of an aircraft system is introduced, with the goal to improve the corresponding MRO Operations. More specifically, the current study aims to obtaining knowledge on the optimal placement of sensors in an ideal Power Electronics Cooling System (PECS) of a modern airliner, aiming to improve input data as a basis for an AI-based DT. The three main fluid parameters to be measured directly or indirectly at various physical locations at the PECS are mass flow rate, temperature and static pressure. The physics-based model can then be combined with a Machine Learning (ML) model, such as a Random Forest (RF), with a multitude of decision trees. Following, the AI system determines whether the PECS operations is considered normal, aiming to optimize the performance of the system and to maximize the Useful Remaining Life (URL). The suggested AI-DT approach is based both on data-driven and physics-based models, an approach which results in increased reliability and availability, reducing possible Aircraft on Ground (AOG) events. Subsequently, the enhanced prediction capability results in the optimization of the maintenance processes and in reduced operational costs.

Design of the Central Solenoid of the HV Electron Cooling System for the NICA Collider

The HV electron cooling system designed at the Budker Institute of Nuclear Physics for the NICA collider is the world’s only setup developed for a collider and makes it possible to simultaneously cool two ion beams with an energy up to 4.5 GeV/u using the magnetized electron flow [1]. Due to the fact that the cooling system should be installed at the NICA collider, the distance between the beam axes of cooling channels corresponds to the distance between collider beams and amounts to 320 mm. This became the first factor affecting the entire structure of the electron-cooling system and limits the maximum possible outer radius of longitudinal field coils. The energy-consumption limitation of 500–700 kW [2] can be considered the other factor, and it directly affects the density of filling the solenoid with the conductor. The design of the central solenoid (cooling solenoid) of the electron-cooling system is described, and it has been developed taking into account the imposed limitations.

Status of the High-Voltage Electron-Cooling System of the NICA Collider

In order to achieve the design luminosity in the NICA collider, it is planned to equip it with both stochastic and electron cooling. The electron-cooling system (ECS) for 2.5 MeV consists of two coolers which cool both ion beams simultaneously. The Budker Institute of Nuclear Physics (BINP SB RAS) already built and commissioned an electron cooling system for the NICA booster, and now the high-voltage ECS for the collider is being developed. This paper describes the basic elements of the system and the status of the cooler development.

Start of Electron Cooling System for the NICA Booster

In order to achieve the required beam parameters in the NICA booster, the electron cooling system (ECS) was designed and manufactured at the Institute of Nuclear Physics (INP), Novosibirsk. In 2017, the system was shipped to JINR and its assembly and commissioning started. A specific feature of this system is that, for the first time ever, the electron cooling method with a magnetized e-beam is applied at the superconducting synchrotron; this imposes some additional requirements for the design and start of the ECS, operating at room temperature. This paper describes the main steps of the ECS assembly and start at the straight section of the booster, including mounting mechanical, electrical, and plumbing systems (water, electricity, air, and oil system) and geodetic works on installing the system on site. The measured magnetic field homogeneity for the straight solenoid is given. The assembly of vacuum and magnet systems takes several steps because of the ECS design features. At the final assemblage stage of the vacuum system, the vacuum chamber is baked up and the bulk getters and the cathode of the electron gun are activated. Upon completing assembly and testing the high voltage system, the E-beam is conducted from the gun to the collector.

Design of the 2.5 MV Electron Cooling System and the Potential for Increasing NICA Collider Luminosity

The design and capabilities of the electron cooling system for the NICA collider are discussed. This system should suppress the intrabeam scattering and beam–beam interactions.

High Potential of Magnet on the Performance of Dual Piezoelectric Fans in Electronics Cooling System

Recently, piezoelectric fan has gained attention as potential active cooling method for electronics devices. Even though the piezoelectric requires high voltage, there are findings to overcome the shortcomings. Adding on a magnet at the tip of the piezoelectric fan to activate other magnetic passive fans is one of the methods to increase the total amplitude generated by the fans. This paper will discuss on the performance of integrated piezoelectric fan with passive fans (later refer to magnetic fans) to enhance the heat transfer in cooling system. A repulsive force produced by the magnets will cause the magnetic blades to oscillate together with the piezoelectric fan. The paper will focus on the optimization parameters of the magnets for selected dimension of piezoelectric fan. The parameters under investigation are the position of the magnet on the piezoelectric fan, number of magnets on each blades and orientation of blades with respect to adjacent blade. Results show that the magnet at middle location of extensive blade with double magnets generate the largest amplitude, 80% better than fan without magnet and for dual integrated piezoelectric fan with magnetic fan, radial orientation gives better result by 25%. By increasing the total amplitude using magnetic force, power consumption can be reduced while the heat transfer performance can be enhanced. it shows a good agreement for positive heat transfer and thermal resistance improvement compared to natural convection.

Technology and Construction of the Superconducting Systems. Preliminary Temperature Monitoring System for the Experiment on the Electron Cooling System of NICA

Technology and Construction of the Superconducting Systems. Preliminary Temperature Monitoring System for the Experiment on the Electron Cooling System of NICA

Experimental investigations on Thermal Performance of Copper with Aluminium Based Finned Heat sinks for Electronics Cooling System

An Experimental investigation on the thermal performance of copper with aluminium based finned heat sinks for electronics cooling system was studied. The heat sinks have different material proportions containing major constituent of aluminium and minor constituent of copper. Considered with straight finned heat sink for the experiments for its easiness in fabrication and efficient heat transfer properties. The observational results for aluminium with copper alloy are compared with pure aluminium heat sink. Heat sink geometry, fin pitch and its height were taken from the commercially available heat sinks. In this research work best heat sink geometry is chosen and cooked up with different volume of copper added with aluminium. Selected four different spots of heat sinks and the temperature raising characteristics were measured for natural convection. also the temperature is raised to a fixed temperature and the temperature lowering characteristics were measured in forced convection as the air circulation takes more heat to keep the heat sink temperature within the desired level.

Stability of Al2O3-water Nanofluid for Electronics Cooling System

For stability of nanofluid need to study, before going to passed it through the electronic device. Because need to more stability of nanofluid and avoid the sedimentation and clogging substance of nanofluid. Stability effect on rectangular shape minichannel heat sink is experimentally investigated for electronics cooling using nanofluids as coolants instead of water. Al2O3-water nanofluids with 0.10 to 0.25 vol. % of nanoparticle was used as coolants. From experiment result, final particle cluster size, microstructure, zeta potential, sedimentation, Transmission Electron microscope and photo capture method analyze for stability purpose. Shown the 0.10 vol. % was better performance on electronic cooling system respect of stability.

Electronics Cooling System and Component Design According to the Second Law

This work focuses on a comparison of second law based component design on one hand and second law based system design on the other within the context of electronics cooling. Typical electronics cooling components such as a heat sink and a heat exchanger are modeled and designed towards minimum entropy generation on individual level and on system level. A comparison of these levels allows us to qualify and quantify the influences among components induced by a system. Simultaneously, this article endeavors to be an illustrated assessment of the usefulness of efficiency criteria on component level. It turns out that the results of this work reveal a substantial influence of system dependencies on the optimal component design. As such a note of caution is raised about second law based component design which does not take into account the system in which a component has to operate.

High-voltage electron cooler project for NICA collider

A high-voltage electron cooling system (ECS) with electron energy reaching 2.5 MeV for the NICA collider is being designed at the Joint Institute for Nuclear Research. The ECS is being developed in correspondence with the available experience in manufacturing similar systems from around the world. The main feature of this design is the use of two cooling electron beams (one beam per collider ring); electrons are accelerated and decelerated by a common high-voltage generator. A conceptual project of high-voltage ECS has been developed. The cooler consists of three tanks filled with SF6 gas under pressure. Two of them contain electron-beam forming systems; each system consists of two electron guns, two electron collectors, and accelerating-decelerating tubes placed in a longitudinal magnetic field generated by a solenoid. The third tank contains a high-voltage generator based on the voltage-multiplying circuit.

Convective Performance of Nanofluids in Commercial Electronics Cooling Systems

Abstract Nanofluids are stable engineered colloidal suspensions of a small fraction of nanoparticles in a base fluid. Nanofluids have shown great promise as heat transfer fluids over typically used base fluids and fluids with micron sized particles. Suspensions with micron sized particles are known to settle rapidly and cause clogging and damage to the surfaces of pumping and flow equipment. These problems are dramatically reduced in nanofluids. In the current work we investigate the performance of different volume loadings of water-based alumina nanofluids in a commercially available electronics cooling system. The commercially available system is a water block used for liquid cooling of a computational processing unit. The size of the nanoparticles in the study is 20–30 nm. Results show an enhancement in convective heat transfer due to the addition of nanoparticles in the commercial cooling system with volume loadings of nanoparticles up to 1.5% by volume. The enhancement in the convective performance observed is similar to what has been reported in well controlled and understood systems and is commensurate with bulk models. The current nanoparticle suspensions showed visible signs of settling which varied from hours to weeks depending on the size of the particles used.

10.1007/s11497-008-2008-4

A compact cyclotron to accelerate negative hydrogen ions up to 8 MeV is considered as a possible solution to charge the high voltage terminal of the Electron Cooling System for High Energy Storage Ring at GSI (HESR Project, Darmstadt). Physical as well as technical parameters of the accelerator are estimated. Different modifications of commercially available cyclotrons are considered. Parameters of accelerators as a possible source of a 1-mA H− beam for HESR are compared. An original design based on the application of well-established technical solutions for commercial accelerators is proposed.

Feasibility study of 8-MeV H− cyclotron to charge the electron cooling system for HESR

A compact cyclotron to accelerate negative hydrogen ions up to 8 MeV is considered as a possible solution to charge the high voltage terminal of the Electron Cooling System for High Energy Storage Ring at GSI (HESR Project, Darmstadt). Physical as well as technical parameters of the accelerator are estimated. Different modifications of commercially available cyclotrons are considered. Parameters of accelerators as a possible source of a 1-mA H− beam for HESR are compared. An original design based on the application of well-established technical solutions for commercial accelerators is proposed.

Attainment of an MeV-range, DC electron beam for the Fermilab cooler

To prepare a beam generation device for Fermilab's future Recycler Electron Cooling system, an experimental set-up with a simplified beam line has been commissioned at Fermilab. Stable operation was achieved at an electron energy of 3.5MeV and a DC beam current of up to 0.5A. The main reason for interruptions of the operation was found to be microsecond long bursts of the cathode current. While the frequency of the interruptions is determined primarily by a flow of secondary ions, the resulting reduction in the duty factor depends on the beam optics, the protection systems, and the tube electric field strength.

Electron cooling system for ITEP ion storage ring

The main goal of the Tera Watt A Cumulator project (Institute for Theoretical and Experimental Physics, Moscow) is accumulation in the storage ring of an intense ion beam, its longitudinal compression and the use of the extracted beam for plasma experiments. However, beam parameters at the target are decreased because of extreme transverse heating and growth of the beam momentum spread due to intrabeam scattering. These effects can be suppressed by application of the electron cooling system (ECS). Design study of ECS has been performed in the Joint Institute for Nuclear Research. The design project and characteristics of the system are described, as well as analysis of the accumulation kinetics in the presence of the cooling system. Design work has shown that because of the small length of the straight section (2.35 m), the effective length of the cooling system is small (about 55–60 cm). Nevertheless, for long accumulation times (>100 s), the system allows us to significantly improve the beam parameters at the target (specific energy, specific power, and so on) and to suppress the beam losses by an order of magnitude.