Electron Beam Pumped Krypton Fluoride Research Articles

KrF Laser Development for Fusion Energy

The United States Naval Research Laboratory is developing an electron beam pumped krypton fluoride laser technology for a direct drive inertial fusion energy power plant. The repetitively pulsed krypton fluoride laser technology being developed meets the fusion energy requirements for laser beam quality, wavelength, and repetition rate. The kryptonfluoride laser technology is projected, based on experiments, to meet the requirements for wall plug efficiency and durability. The projected wall plug efficiency based on experiments is greater than 7 percent. The Electra laser using laser triggered gas switches has conducted continuous operation for 90,000 shots at 2.5 Hertz operation (ten hours). The Electra laser has achieved greater than 700 Joules per pulse at 1 and 2.5 Hertz repetition rate. The comparison of krypton fluoride laser performance with krypton fluoride kinetics code shows good agreement for pulse shape and laser yield. Development and operation of a durable pulse power system with solid state switches has achieved a continuous run of 11 million pulses into a resistive load at 10Hz.

Electron beam pumped krypton fluoride lasers for fusion energy

High-energy electron beam pumped krypton fluoride (KrF) gas lasers are an attractive choice for inertial fusion energy (IFE). Their short wavelength and demonstrated high beam uniformity optimizes the laser-target physics, and their pulsed power technology scales to a large system. This paper presents the principals of this type of laser and the progress toward developing technologies that can meet the IFE requirements for repetition rate (5 Hz), efficiency (>6%), and durability (>3/spl times/10/sup 8/ shots). The Electra laser at the Naval Research Laboratory (NRL) has produced >500 J of laser light in short 5-Hz bursts. Research on Electra and the NRL Nike laser (3000 J, single shot) has shown that the overall efficiency should be greater than 7%. This is based on recent advances in electron beam stabilization and transport, electron beam deposition, KrF laser physics, and pulsed power. The latter includes the development of a new solid-state laser triggered switch that will be the basis for a pulsed power system that can meet the IFE requirements for efficiency, durability, and cost. The major remaining challenge is to develop long-lived hibachi foils (e-beam transmission windows). Based on recent experiments, this may be achievable by periodically deflecting the laser gas.

Electra: Repetitively pulsed, 500 J, 100 ns, KrF oscillator

Electra is a repetitively pulsed, double-sided, electron-beam pumped krypton fluoride laser. Electra has recently operated as an oscillator with an output pulse of 510 J, with 100 ns pulse duration for single shots. At a 1 Hz repetition rate for a ten-shot burst, the laser output averaged 500 J per shot. The dependence of the laser energy on the partial pressures of Kr, Ar, and F2 were examined. Over a 10 to 30 psi total pressure range, the laser output energy decreases with decreasing argon concentration. Specifically, the laser output drops slightly as the argon concentration reduces from 60% to 40%, and then drops more noticeably as it is reduced to 0%. For the 60% Ar case, the optimal fluorine concentration is 0.25%, with a significant falloff in the laser energy from 0.25% to 0.1% and a gradual falloff from 0.25% to 0.7% fluorine. The present burst results indicate that the KrF kinetics is not very sensitive to the gas temperature at a total pressure of 20 psi.

Large area electron beam pumped krypton fluoride laser amplifier

Nike is a recently completed multi-kilojoule krypton fluoride (KrF) laser that has been built to study the physics of direct drive inertial confinement fusion. This paper describes in detail both the pulsed power and optical performance of the largest amplifier in the Nike laser, the 60 cm amplifier. This is a double pass, double sided, electron beam-pumped system that amplifies the laser beam from an input of 50 J to an output of up to 5 kJ. It has an optical aperture of 60 cm × 60 cm and a gain length of 200 cm. The two electron beams are 60 cm high × 200 cm wide, have a voltage of 640 kV, a current of 540 kA, and a flat top power pulse duration of 250 ns. A 2 kG magnetic field is used to guide the beams and prevent self-pinching. Each electron beam is produced by its own Marx/pulse forming line system. The amplifier has been fully integrated into the Nike system and is used on a daily basis for laser-target experiments.

Vibrational relaxation studies in electron-beam excited Krf ∗

The recovery of the gain in electron-beam pumped krypton fluoride has been investigated following saturation with a pulse from a discharge pumped KrF laser. Vibrational relaxation in KrF ∗ is found to occur on a subnanosecond timescale under typical laser conditions and the gain recovers in a time which is approximately equal to the fluorescence decay time.