Electron Acceptor In Solution Research Articles

Effects of the Separation Distance between Two Triplet States Produced from Intramolecular Singlet Fission on the Two-Electron-Transfer Process.

To harvest two triplet excitons of singlet fission (SF) via a two-electron transfer efficiently, the revelation of the key factors that influence the two-electron-transfer process is necessary. Here, by using steady-state and transient absorption/fluorescence spectroscopy, we investigated the two-electron-transfer process from the two triplet excitons of intramolecular SF (iSF) in a series of tetracene oligomers (dimer, trimer, and tetramer) with 7,7,8,8-tetracyanoquinodimethane (TCNQ) as an electron acceptor in solution. Quantitative two-electron transfer could be conducted for the trimer and tetramer, and the rate for the tetramer is faster than that for the trimer. However, the maximum efficiency of the two-electron transfer in the dimer is relatively low (∼47%). The calculation result of the free energy change (ΔG) of the second-electron transfer for these three compounds (-0.024, -0.061, and -0.074 eV for the dimer, trimer, and tetramer, respectively) is consistent with the experimental observation. The much closer ΔG value to zero for the dimer should be responsible for its low efficiency of the two-electron transfer. Different ΔG values for these three oligomers are attributed to the different Coulomb repulsive energies between the two positive charges generated after the two-electron transfer that is caused by their various intertriplet distances. This result reveals for the first time the important effect of the Coulomb repulsive energy, which depends on the intertriplet distance, on the two-electron transfer process from the two triplet excitons of iSF.

Mutagenesis Study of the Cytochrome c Subunit Responsible for the Direct Electron Transfer-Type Catalytic Activity of FAD-Dependent Glucose Dehydrogenase.

The FAD-dependent glucose dehydrogenase from Burkholderia cepacia (FADGDH) is a hetero-oligomeric enzyme that is capable of direct electron transfer (DET) with an electrode. The cytochrome c (cyt c) subunit, which possesses three hemes (heme 1, heme 2, and heme 3, from the N-terminal sequence), is known to enable DET; however, details of the electron transfer pathway remain unknown. A mutagenesis investigation of the heme axial ligands was carried out to elucidate the electron transfer pathway to the electron mediators and/or the electrode. The sixth axial ligand for each of the three heme irons, Met109, Met263, and Met386 were substituted with His. The catalytic activities of the wild-type (WT) and mutant enzymes were compared by investigating their dye-mediated dehydrogenase activities and their DET abilities toward the electrode. The results suggested that (1) heme 1 with Met109 as an axial ligand is mainly responsible for the electron transfer with electron acceptors in the solution, but not for the DET with the electrode; (2) heme 2 with Met263 is responsible for the DET-type reaction with the electrode; and (3) heme 3 with Met386 seemed to be the electron acceptor from the catalytic subunit. From these results, two electron transfer pathways were proposed depending on the electron acceptors. Electrons are transferred from the catalytic subunit to heme 3, then to heme 2, to heme 1 and, finally, to electron acceptors in solution. However, if the enzyme complex is immobilized on the electrode and is used as electron acceptors, electrons are passed to the electrode from heme 2.

Polymer solar cells based low bandgap A1-D-A2-D terpolymer based on fluorinated thiadiazoloquinoxaline and benzothiadiazole acceptors with energy loss less than 0.5 eV

We synthesized an ultra low bandgap terpolymer denoted as P containing fluorinated-fluorene attached thiadiazoloquinoxaline and benzothiadiazole acceptors and thiophene as donor in its backbone and investigated its optical and electrochemical properties. This terpolymer is used for as donor along with PC71BM as electron acceptor in solution processed polymer solar cells (PSCs). The P showed a shows strong absorption band from 650 nm to 1100 nm with an optical bandgap of 1.12 eV and highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of −5.25 eV and −3.87 eV, respectively. After the optimization of P to PC71BM weight ratio, the optimized weight ratio 1:2 in chlorobenzene (CB) solution, the PSC showed overall power conversion efficiency of 4.10% (Jsc of 10.96 mA/cm2, Voc of 0.68 V and FF of 0.55). After the solvent additive (3 v% DIO) followed by subsequent thermal annealing (SA-TA) the PCE has been increased up to 7.54% with Jsc of 16.12 mA/cm2, Voc of 0.65 V and FF of 0.72. The increase in the PCE is related with the enhancement in the both Jsc and FF, attributed optimized nanoscale morphology of the active layer for both efficient exciton dissociation and charge transport towards the electrodes and balanced charge transport in the device, induced by the TSA treatment of the active layer. This is the highest PCE of PSCs with an energy loss about 0.47 eV with the low bandgap of 1.12 eV.

Direct electron transfer-type bioelectrocatalytic interconversion of carbon dioxide/formate and NAD+/NADH redox couples with tungsten-containing formate dehydrogenase

Tungsten-containing formate dehydrogenase (FoDH1) with a molecular mass of 170kDa from Methylobacterium extorquens AM1 catalyzes the oxidation of formate (HCOO−) to carbon dioxide (CO2) with NAD+ as a natural electron acceptor in solution. FoDH1 does not produce any direct electron transfer (DET)-type bioelectrocatalytic wave at planar electrodes, but can adsorb on and communicate with mesoporous carbon electrodes. The curvature effect of mesoporous structures seems to increase the number of enzymes with orientations suitable for electrochemical communication. However, adsorption proceeds slowly on Ketjen Black-modified electrode and the catalytic current density remains low. Most probably, the size of the mesopores is too small to effectively trap FoDH1. The adsorbed FoDH1 catalyzes DET-type bioelectrocatalytic interconversion of the CO2/HCOO− and NAD+/NADH redox couples. Most probably, one of the iron–sulfur clusters located near the enzyme surface communicates with mesoporous electrodes. When the communication proceeds effectively, FoDH1 behaves as a novel bidirectional catalyst for the substrates, since FoDH1 can realize fast uphill intramolecular electron transfer. The non-covalently bound flavin mononucleotide (FMN) cofactor in FoDH1 is dissociated from some FoDH1 molecules and adsorbs on the mesoporous electrode to give a symmetrical surface-confined redox wave. Although adsorbed FMN cannot participate in mediated electron transfer (MET)-type bioelectrocatalysis, dissociated FMN in solution works as a mediator for MET-type bioelectrocatalysis of the HCOO− oxidation at planar electrodes.

Photoinduced Charge Separation within Metallo-supramolecular Wires Built around a [Ru(bpy)3](2+)-Bisterpyridine Linear Entity.

A [Ru(bpy)3](2+)-like complex (L1) bearing two free terpyridine groups at the 5 and 5' positions of the same bipyridine, linked by the rigid and linear 2,5-dimethyl phenylene bridges has been synthesized to open access to two classes of linear molecular wires with photosensitive properties: a bimetallic coordination polymer and an inorganic triad. In this Research Article, we report on the synthesis and characterization of the resulting [{Ru(II_)Fe(II)}n](4n+) alternated bimetallic polymer and the [Co(III_)Ru(II_)Fe(II)](7+) triad based on the building block L1. The [{Ru(II_)Fe(II)}n](4n+) polymer is fully characterized in solution. Cyclic voltammetry and emission lifetime measurements show that the bridging ligand allows interaction between the metal centers in the excited state despite the lack of interactions in the ground state. Under visible irradiation, the polymer can be fully oxidized in the presence of a sacrificial electron acceptor in solution. Thin robust films of the polymer are easily obtained on ITO by a simple electrochemical procedure based on an electroreduction adsorption process. The ITO/[{Ru(II_)Fe(II)}n](4n+)-modified electrode behaves as a photocathode under irradiation in the presence of ArN2(+). The magnitude of the photocurrent is dependent on the film thickness, probably limited by the diffusion of charge in thicker film. On the other hand L1 is also used to construct a well-ordered triad in association with Co(III) and Fe(II) metallic centers as electron acceptor and donor, respectively. The metallic triad is anchored on ITO or on a SiO2 wafer, starting from a terpyridine phosphonate modified surface. AFM images prove the presence of the triad in a linear upward orientation. Irradiation of the ITO/[Co(III_)Ru(II_)Fe(II)](7+) modified surface in the presence of triethanolamine in CH3CN induces the generation of an anodic photocurrent of around 30 μA.cm(-2). The photocurrent density generated by the ITO/[Co(III_)Ru(II_)Fe(II)](7+) electrode, appears to be more stable than in the case of ITO/[{Ru(II_)Fe(II)}n](4n+) because of the presence of the anchoring group. Moreover, this photocurrent magnitude represents an enhancement of 30% compared to our previous triad ( Dalton Trans. 2014 , 43 , 12156 - 12159 ), proving the advantage of a linear and rigid spacer for the construction of such molecular assemblies with photoinduced charge transfer abilities.

2,2-Dicyanovinyl-end-capped oligothiophenes as electron acceptor in solution processed bulk-heterojunction organic solar cells

Three 2,2-dicyanovinyl (DCV) end-capped A-π-D-π-A type oligothiophenes (DCV-OTs) containing dithieno[3,2-b:2′,3′-d]silole (DTSi), cyclopenta[1,2-b:3,4-b′]dithiophene (DTCP) or dithieno[3,2-b:2′,3′-d]pyrrole (DTPy) unit as the central donor part, mono-thiophene as the π-conjugation bridge were synthesized. The absorption spectroscopies, cyclic voltammetry of these compounds were characterized. Results showed that all these compounds have intensive absorption band over 500–680nm with a LUMO energy level around −3.80eV, which is slightly higher than that of [6,6]phenyl-C61-butyric acid methyl ester (PC61BM, ELUMO=−4.01eV), but lower than that of poly(3-hexylthiophene) (P3HT, ELUMO=−2.91eV). Solution processed bulk heterojunction “all-thiophene” solar cells using P3HT as electron donor and the above mentioned oligothiophenes as electron acceptor were fabricated and tested. The highest power conversion efficiency (PCE) of 1.31% was achieved for DTSi-cored compound DTSi(THDCV)2, whereas PTB7:DTSi(THDCV)2 based device showed slightly higher PCE of 1.56%. Electron mobilities of these three compounds were measured to be around 10−5cm2V−1s−1 by space charge limited current method, which is much lower than that of PC61BM, and was considered as one of the reason for the low photovoltaic performance.

An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells

A novel small molecule based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone was synthesized and used as an electron acceptor in solution processed organic solar cells, which exhibited a power conversion efficiency as high as 3.93%.

Electronic Properties of Trifluoromethylated Corannulenes

With great stacking comes great conductivity: trifluoromethylated corannulenes are unexpectedly strong electron acceptors in solution. Even a polycrystalline film of 1,2-(F(3)C)(2)-corannulene (top structure and curve in the plot) exhibits conductivity three orders of magnitude higher than that of pristine corannulene!

Incorporating Electron-Transfer Functionality into Synthetic Metalloproteins from the Bottom-up

The alpha-helical coiled-coil motif serves as a robust scaffold for incorporating electron-transfer (ET) functionality into synthetic metalloproteins. These structures consist of a supercoiling of two or more aplha helices that are formed by the self-assembly of individual polypeptide chains whose sequences contain a repeating pattern of hydrophobic and hydrophilic residues. Early work from our group attached abiotic Ru-based redox sites to the most surface-exposed positions of two stranded coiled-coils and used electron-pulse radiolysis to study both intra- and intermolecular ET reactions in these systems. Later work used smaller metallopeptides to investigate the effects of conformational gating within electrostatic peptide-protein complexes. We have recently designed the C16C19-GGY peptide, which contains Cys residues located at both the "a" and "d" positions of its third heptad repeat in order to construct a nativelike metal-binding domain within its hydrophobic core. It was shown that the binding of both Cd(II) and Cu(I) ions induces the peptide to undergo a conformational change from a disordered random coil to a metal-bridged coiled-coil. However, whereas the Cd(II)-protein exists as a two-stranded coiled-coil, the Cu(I) derivative exists as a four-stranded coiled-coil. Upon the incorporation of other metal ions, metal-bridged peptide dimers, tetramers, and hexamers are formed. The Cu(I)-protein is of particular interest because it exhibits a long-lived (microsecond) room-temperature luminescence at 600 nm. The luminophore in this protein is thought to be a multinuclear CuI4Cys4(N/O)4 cage complex, which can be quenched by exogenous electron acceptors in solution, as shown by emission-lifetime and transient-absorption experiments. It is anticipated that further investigation into these systems will contribute to the expanding effort of bioinorganic chemists to prepare new kinds of functionally active synthetic metalloproteins.

Interactions of Metal—Metal‐Bonded Antitumor Active Complexes with DNA Fragments and DNA

AbstractFor Abstract see ChemInform Abstract in Full Text.

Interactions of Metal−Metal-Bonded Antitumor Active Complexes with DNA Fragments and DNA

This Account summarizes the DNA binding properties of anticancer active dinuclear Rh, Re, and Ru compounds. The combined results of NMR spectroscopy, X-ray crystallography, and various biochemical tools provide incontrovertible evidence that dinuclear complexes are favorably poised to bind to purine nucleobases, DNA fragments, and double-stranded DNA. Moreover, direct DNA photocleavage in vitro is effected by dirhodium compounds in the presence of electron acceptors in solution or directly attached to the dirhodium core. This research has provided valuable insight in the interactions of dinuclear compounds with DNA, knowledge that is an excellent backdrop for rational design of promising dinuclear drugs.

Sorption and Abiotic Redox Transformation of Nitrobenzene at the Smectite–Water Interface

The effect of the redox state of structural Fe on the surface reactivity of iron-bearing phyllosilicates in aqueous suspension was investigated using a molecular probe. For this purpose the structural Fe in montmorillonite and ferruginous smectite was chemically reduced by sodium dithionite in citrate–bicarbonate (CB) buffer solution under N2 at 70°C, with the excess reactants removed by washing and centrifugation. Nitrobenzene was chosen as an electron acceptor probe to react with unaltered and chemically reduced smectites. Nitrobenzene was transformed into aniline only in the presence of the reduced smectites. This abiotic reductive transformation depended on the concentration of the electron acceptor in solution and the total accessible structural FeII in smectites. As much as 40% of the crystal layer structural FeII of the reduced smectites was oxidized to FeIII; these electrons migrated to the surfaces/edges and then were transported into the adjacent aqueous layer. No significant effect of the oxidation state of structural Fe on the sorption of nitrobenzene on smectites was observed, but the reduced smectites sorbed less aniline than the unaltered smectites. The electronic structure and molecular geometry of the probe were modified within the smectite–water interface. Reducing structural Fe in smectites perturbed the surface reactivity.

Towards artificial photosynthesis: ruthenium–manganese chemistry for energy production

The synthesis and characterisation of supramolecular model systems mimicking the light reactions on the donor side of Photosystem II (PSII) in green plants have been reviewed. In these systems, manganese complexes and tyrosine are electron donors, modelling the manganese cluster and tyrosineZ in PSII. The donors have been covalently linked to a photosensitizer, a ruthenium(II) tris-bipyridyl complex, that plays the role of the P680 chlorophylls in PSII. It has been demonstrated that, in the presence of an external electron acceptor in solution, the model systems can undergo an intermolecular electron transfer from the photoexcited state of RuII to an acceptor, followed by an intramolecular electron transfer from the coordinated Mn complexes or the tyrosine unit to the photogenerated RuIII. This leads to regeneration of the RuII and oxidation of the Mn complexes or generation of a tyrosine radical. The process closely mimics the primary reaction steps on the donor side of PSII.

Photoelectrochemical Properties of Size-Quantized CdS Microcrystals Modified with Various Amounts of Viologen-Functionalized Thiol

Size-quantized CdS microcrystals (Q-CdS) modified with various amounts of electroactive 1-decyl-1[prime]-(3-mercaptopropyl)-4,4[prime]-bipyridinium dibromide (VSH) and electroinactive decanethiol were prepared. The surface-modified VSH was photoreduced by irradiation of Q-CdS to give both dimeric and monomeric radical cations of the viologen, and the formation of the former was enhanced by increasing the amount of the surface-bound VSH. Kinetic analyses revealed that the rate constants for the reduction of the surface-modified VSH and for the reoxidation of the produced radical cations were independent of the amount of the VSH. Q-CdS having the higher amount of VSH showed the higher activity for electron transfer to methylene blue in solution, evidencing that the surface-bound viologen mediated electron transfers from Q-CdS to the electron acceptor in solution. 37 refs., 10 figs.

The influence of electrodeposited gold on the properties of III–V semiconductor electrodes—Part 1. Results of current—potential measurements on p-GaAs

The influence of electrodeposition of gold on the electrochemical properties of p-type GaAs has been studied. From current—potential and impedance measurements performed in solutions containing various redox-couples it was concluded that gold-related surface states play a central role in the interaction between semiconductor, metal and electrolyte solution. A kinetic model is presented which comprises three processes: (i) excitation of valence band electrons to the surface states, (ii) recombination of these electrons with holes in the valence band and (iii) transfer of electrons from the surface states to an electron acceptor in solution.

Distinct redox behaviour of prosthetic groups in ready and unready hydrogenase from Chromatium vinosum

The redox behaviour of the Ni(III)/Ni(II) transition in hydrogenase from Chromatium vinosum is described and compared with the redox behaviour of the nickel ion in the F420-nonreducing hydrogenase from Methanobacterium thermoautotrophicum. Analogous to the situation in the oxidised hydrogenase of Desulfovibrio gigas (Fernandez, V.M., Hatchikian, E.C., Patil, D.S. and Cammack, R. (1986) Biochim. Biophys. Acta 883, 145-154), the C. vinosum enzyme can also exist in two forms: the 'unready' form (EPR characteristics of Ni(III): gx,y,z = 2.32, 2.24, 2.01) and the 'ready' form (EPR characteristics Ni(III): gx,y,z = 2.34, 2.16, 2.01). Like in the oxidised enzyme of M. thermoautotrophicum the Ni(III)/Ni(II) transition for the unready form titrated completely reversible (both at pH 6.0 and pH 8.0). In contrast, the reversibility of the Ni(III)/Ni(II) transition in the ready enzyme was strongly dependent on pH and temperature. At pH 6.0 and 2 degrees C reduction of Ni(III) in ready enzyme was completely irreversible, whereas at pH 8.0 and 30 degrees C Ni(III) in both ready and unready enzyme titrated with E0' = -115 mV (n = 1). Hampered redox equilibration between the ready enzyme and the mediating dyes is interpreted in terms of an obstruction of the electron transfer from nickel at the active site to the artificial electron acceptors in solution. The origin of this obstruction might be related to possible changes in the protein structure induced by the activation process. The E0'-value of the Ni(III)/Ni(II) equilibrium was pH sensitive (-60 mV/delta pH) indicating that reduction of nickel is coupled to a protonation. A similar pH-dependence was observed for the titration of the spin-spin interaction of Ni(III) and a special form of the [3Fe-4S]+ cluster (E0' = +150 mV, pH 8.0, 30 degrees C). Redox equilibration of this coupling was extremely sensitive to pH and temperature. The uncoupled [3Fe-4S]+ cluster titrated pH-independently with E0' = -10 mV (pH 8.0, 30 degrees C).

Poly(pyrrole–phenothiazine) modified electrodes. Application as photoelectrodes via a charge transfer complex

Electrodes modified by a poly(pyrrole–phenothiazine) film are obtained by anodic polymerization of N-(3-pyrrol-1-ylpropyl)phenothiazine; they act as photoelectrodes via their charge transfer complex with an electron acceptor in solution.

Charge transfer processes with electronically excited iodine molecules

AbstractUsing an anthracene crystal as a probe, it was concluded from hole injection experiments that the 3∏+ state of iodine in carbon tetrachloride has a mean free path √Dτ in solution of (3 ± 2) · 10−6 cm. No energy transfer between iodine molecules could be detected. It was shown that photocurrents in naphthalene crystals can be generated either through reaction of naphthalene excitons with electron acceptors in solution or of excited iodine molecules in the solution with ground state naphthalene molecules in the crystal.

Charge transfer processes with electronically excited anthracene molecules

The rate of the electron transfer reaction between excited anthracene molecules and various electron acceptors in solution was determined by measurement of the photostimulated current through an anthracene electrode. A previous analysis of the photoinjection method was applied to experiments with IrCl2–6/IrCl3–6, Fe3+/Fe2+ and Tl3+/Tl+. For the iridium and the hexaquo iron complexes the magnitude of the polarization energy change in solution is small, so that an excited state for the reduced component is preferred as a product of the electron transfer reaction. A large polarization energy change for the thallium system renders the ground state of the product most accessible for the electrode reaction.