Electromechanical Setup Research Articles

High-fidelity macroscopic superposition states via shortcut to adiabaticity

A shortcut to an adiabatic scheme is proposed for preparing a massive object in a macroscopic spatial superposition state. In this scheme we propose to employ counterdiabatic driving to maintain the system in the ground state of its instantaneous Hamiltonian while the trap potential is tuned from a parabola to a double well. This, in turn, is performed by properly ramping a control parameter. We show that a few counterdiabatic drives are enough for most practical cases. A hybrid electromechanical setup in superconducting circuits is proposed for the implementation. The efficiency of our scheme is benchmarked by numerically solving the system dynamics in the presence of noises and imperfections. The results show that a mechanical resonator with very-high-fidelity spatially distinguishable cat states can be prepared with our protocol. Furthermore, the protocol is robust against noises and imperfections. We also discuss a method for verifying the final state via spectroscopy of a coupled circuit electrodynamical cavity mode. Our work can serve as the ground work to feasibly realize and verify macroscopic superposition states in future experiments. Published by the American Physical Society 2024

Effect of Ligament Fibers on Dynamics of Synthetic, Self-Oscillating Vocal Folds in a Biomimetic Larynx Model.

Synthetic silicone larynx models are essential for understanding the biomechanics of physiological and pathological vocal fold vibrations. The aim of this study is to investigate the effects of artificial ligament fibers on vocal fold vibrations in a synthetic larynx model, which is capable of replicating physiological laryngeal functions such as elongation, abduction, and adduction. A multi-layer silicone model with different mechanical properties for the musculus vocalis and the lamina propria consisting of ligament and mucosa was used. Ligament fibers of various diameters and break resistances were cast into the vocal folds and tested at different tension levels. An electromechanical setup was developed to mimic laryngeal physiology. The measurements included high-speed video recordings of vocal fold vibrations, subglottal pressure and acoustic. For the evaluation of the vibration characteristics, all measured values were evaluated and compared with parameters from ex and in vivo studies. The fundamental frequency of the synthetic larynx model was found to be approximately 200-520 Hz depending on integrated fiber types and tension levels. This range of the fundamental frequency corresponds to the reproduction of a female normal and singing voice range. The investigated voice parameters from vocal fold vibration, acoustics, and subglottal pressure were within normal value ranges from ex and in vivo studies. The integration of ligament fibers leads to an increase in the fundamental frequency with increasing airflow, while the tensioning of the ligament fibers remains constant. In addition, a tension increase in the fibers also generates a rise in the fundamental frequency delivering the physiological expectation of the dynamic behavior of vocal folds.

Honey bees respond to multimodal stimuli following the principle of inverse effectiveness.

ABSTRACTMultisensory integration is assumed to entail benefits for receivers across multiple ecological contexts. However, signal integration effectiveness is constrained by features of the spatiotemporal and intensity domains. How sensory modalities are integrated during tasks facilitated by learning and memory, such as pollination, remains unsolved. Honey bees use olfactory and visual cues during foraging, making them a good model to study the use of multimodal signals. Here, we examined the effect of stimulus intensity on both learning and memory performance of bees trained using unimodal or bimodal stimuli. We measured the performance and the latency response across planned discrete levels of stimulus intensity. We employed the conditioning of the proboscis extension response protocol in honey bees using an electromechanical setup allowing us to control simultaneously and precisely olfactory and visual stimuli at different intensities. Our results show that the bimodal enhancement during learning and memory was higher as the intensity decreased when the separate individual components were least effective. Still, this effect was not detectable for the latency of response. Remarkably, these results support the principle of inverse effectiveness, traditionally studied in vertebrates, predicting that multisensory stimuli are more effectively integrated when the best unisensory response is relatively weak. Thus, we argue that the performance of the bees while using a bimodal stimulus depends on the interaction and intensity of its individual components. We further hold that the inclusion of findings across all levels of analysis enriches the traditional understanding of the mechanics and reliance of complex signals in honey bees.

Electromechanical tensile test equipment for stretchable conductive materials

The demand for soft and conductive materials has intensified due to the increased interest in soft robotics. Consequently, researchers strive to realize easy, fast, and cost-effective fabrication methods. To evaluate the mechanical properties of materials requires tensile testing. However, the availability of an electromechanical tensile test to assess the quality of the electromechanical properties of stretchable conductive materials has yet to be widely commercialized. This situation has hindered the development of soft and stretchable conductive materials. Here, we develop a customized electromechanical tensile test for soft and stretchable materials. We integrate three standalone devices using Python software and provide a graphic user interface (GUI) for easy operation of the equipment. We expect that our customized electromechanical tensile test will contribute to advances in soft robotics, especially soft and stretchable sensors. Furthermore, our electromechanical setup can aid in the development of laboratory equipment and the understanding of the electromechanical properties of stretchable conductive materials.

Nonreciprocal light transmission via optomechanical parametric interactions.

Nonreciprocal transmission of optical or microwave signals is indispensable in various applications involving sensitive measurements. In this paper, we study optomechanically induced directional amplification and isolation in a generic setup including two cavities and two mechanical oscillators by exclusively using blue-sideband drive tones. The input and output ports defined by the two cavity modes are coupled through coherent and dissipative paths mediated by the two mechanical resonators, respectively. By choosing appropriate transfer phases and strengths of the driving fields, either a directional amplifier or an isolator can be implemented at low thermal temperature, and both of them show bi-directional nonreciprocity working at two mirrored frequencies. The nonreciprocal device can potentially be demonstrated by opto- and electromechanical setups in both optical and microwave domains.

Variability of Twin Boundary Velocities in 10M Ni–Mn–Ga Measured Under $$\upmu{\text{s}}$$-Scale Force Pulses

Twin boundary motion is the basic mechanism responsible for fast actuation of magnetic shape memory (MSM) alloys. Previous studies implied on a wide diversity of twin boundary velocities measured under similar conditions. Here, a data set of more than 400 velocity values is measured under conditions that are relevant for MSM applications and represents the dynamic behavior of 73 twin boundaries. Velocities are measured using an electro-mechanical setup that applies a controllable $$\upmu{\text{s}}$$ -scale force pulse and combines force measurements with high-speed imaging. The latter allows extracting velocities of individual twin boundaries, which are then correlated to the macroscopic stress in the sample. The appearance of type I twins is more prevalent than type II, resulting a much larger data set for type I twins. Statistical analysis of velocity points of type I twins reveals an increasing trend of the velocity with the macroscopic stress, as well as useful information on the probability distribution of velocity data. Velocities of type II twins exhibit large variability over a relatively narrow stress range. This can reason the large differences in maximal velocities reported previously for this twin type. The obtained statistical data can improve the design and modeling of MSM actuators.

Experimental Assessment of the Interface Electronic System for PVDF-Based Piezoelectric Tactile Sensors.

Tactile sensors are widely employed to enable the sense of touch for applications such as robotics and prosthetics. In addition to the selection of an appropriate sensing material, the performance of the tactile sensing system is conditioned by its interface electronic system. On the other hand, due to the need to embed the tactile sensing system into a prosthetic device, strict requirements such as small size and low power consumption are imposed on the system design. This paper presents the experimental assessment and characterization of an interface electronic system for piezoelectric tactile sensors for prosthetic applications. The interface electronic is proposed as part of a wearable system intended to be integrated into an upper limb prosthetic device. The system is based on a low power arm-microcontroller and a DDC232 device. Electrical and electromechanical setups have been implemented to assess the response of the interface electronic with PVDF-based piezoelectric sensors. The results of electrical and electromechanical tests validate the correct functionality of the proposed system.

Quantum nondemolition measurement of mechanical motion quanta

The fields of optomechanics and electromechanics have facilitated numerous advances in the areas of precision measurement and sensing, ultimately driving the studies of mechanical systems into the quantum regime. To date, however, the quantization of the mechanical motion and the associated quantum jumps between phonon states remains elusive. For optomechanical systems, the coupling to the environment was shown to make the detection of the mechanical mode occupation difficult, typically requiring the single-photon strong-coupling regime. Here, we propose and analyse an electromechanical setup, which allows us to overcome this limitation and resolve the energy levels of a mechanical oscillator. We found that the heating of the membrane, caused by the interaction with the environment and unwanted couplings, can be suppressed for carefully designed electromechanical systems. The results suggest that phonon number measurement is within reach for modern electromechanical setups.

Quantum-Limited Directional Amplifiers with Optomechanics.

Directional amplifiers are an important resource in quantum-information processing, as they protect sensitive quantum systems from excess noise. Here, we propose an implementation of phase-preserving and phase-sensitive directional amplifiers for microwave signals in an electromechanical setup comprising two microwave cavities and two mechanical resonators. We show that both can reach their respective quantum limits on added noise. In the reverse direction, they emit thermal noise stemming from the mechanical resonators; we discuss how this noise can be suppressed, a crucial aspect for technological applications. The isolation bandwidth in both is of the order of the mechanical linewidth divided by the amplitude gain. We derive the bandwidth and gain-bandwidth product for both and find that the phase-sensitive amplifier has an unlimited gain-bandwidth product. Our study represents an important step toward flexible, on-chip integrated nonreciprocal amplifiers of microwave signals.

Automated setup for ex vivo larynx experiments.

Ex vivo larynx experiments are limited in time due to degeneration of the laryngeal tissues. In order to acquire a significant and comparable amount of data, automatization of current manual experimental procedures is desirable. A computer controlled, electro-mechanical setup was developed for time-dependent variation of specific physiological parameters, including adduction and elongation level of the vocal folds and glottal flow. The setup offers a standardized method to induce defined forces on the laryngeal cartilages. Furthermore, phonation onset is detected automatically and the subsequent measurement procedure is automated and standardized to improve the efficiency of the experimental process. The setup was validated using four ex vivo porcine larynges, whereas each validation measurement series was executed with one separate larynx. Altogether 31 single measurements were undertaken, which can be summed up to a total experimental time of about 4 min. Vocal fold elongation and adduction lead both to an increase in fundamental frequency and subglottal pressure. Measurement procedures like applying defined subglottal pressure steps and onset-offset detection were reliably executed. The setup allows for a computer-based parameter control, which enables fast experimental execution over a wide range of laryngeal configurations. This maximizes the number of measurements and reduces personal effort compared with manual procedures.

Microcontroller based application of bio-sensing the critical parameters of the human lung

ABSTRACTA comprehensive study of the thermal exchange of airflow during respiration was carried out and verified on human subject for non-invasive observation setup. The mechanism was parameterized into its electrical references and descriptions. Latter was found for critical parameters translated into electronic analogous signals. Important physical nodal points in the human breathing system are identified for temperature of exhale which is always between 41.1°C and 48.8°C and also it was found that humidity variations of inhale at 40 mg/l water contents having 100% RH which immediately reduced by 66% at exhale. This study was carried out by electromechanical setup of the system using sensors. Two types of custom processed sensors of NTC bead-type SiC and B4C as thermistors and GE EMD-4000 as humidity sensors that were modified at MeMDRL were used for such studies by carefully processing with bio-safe materials on these commercially available sensors; those were made suitable as bio-applicable sensors. The glass-like hardened non-hazardous Polyurethane μ-coating cured at constant temperature of 104°C for 18 hours were used. Special program for Arduino microcontroller system was created for the custom designed electronic hardware to control based on accurately processed data of sensor systems. Two sets of algorithms were computed to linearize all data forming at constant slope. By implementing HW/SW applications; the system can detect and measure the thermal energy and can convert into useful electrical power while breathing.

Force-noise spectroscopy by tunneling current deflection sensing

An electro-mechanical setup for the measurement of force-noise properties in a low-temperature tunneling microscope has been utilized to enable extremely high resolution and acquire force-noise spectra as function of the applied voltage bias. The direct crosstalk of vibrations onto the tunneling current is used to measure the deflection of a force-sensing cantilever. We demonstrate its capability to measure the mechanical energy of the cantilever, caused by the noise of the force from vacuum tunneling between polycrystalline Iridium electrodes. We observe peak levels of the induced cantilever energy at polarity-symmetric voltages corresponding to dominant peaks of the phonon density of states, which suggests that inelastic transport processes contribute to force fluctuations.

All-solid-state carbon nanotube torsional and tensile artificial muscles.

We report electrochemically powered, all-solid-state torsional and tensile artificial yarn muscles using a spinnable carbon nanotube (CNT) sheet that provides attractive performance. Large torsional muscle stroke (53°/mm) with minor hysteresis loop was obtained for a low applied voltage (5 V) without the use of a relatively complex three-electrode electromechanical setup, liquid electrolyte, or packaging. Useful tensile muscle strokes were obtained (1.3% at 2.5 V and 0.52% at 1 V) when lifting loads that are ∼25 times heavier than can be lifted by the same diameter human skeletal muscle. Also, the tensile actuator maintained its contraction following charging and subsequent disconnection from the power supply because of its own supercapacitor property at the same time. Possible eventual applications for the individual tensile and torsional muscles are in micromechanical devices, such as for controlling valves and stirring liquids in microfluidic circuits, and in medical catheters.

Fabrication and Experimental Study on Two-Axis Solar Tracking

This paper presents the design and experimental study of a two axis (azimuth and Polar) automatic control solar tracking system to track solar PV panel according to the direction of beam propagation of solar radiation. The designed tracking system consists of sensor and Microcontroller with built in ADC operated control circuits to drive motor. Two steeper motors are used to move the system panel, keeping the sun’s beam at the center of the sensor. The measured variables are compared with the fixed axis. The results indicate that the energy surplus becomes about (45-56%) with atmospheric influences. In case of seasonal changes of the sun’s position there is no need to change in the hardware and software of the system. . Considering all above aspects of this tracking system it can be concluded that, it is a flexible tracking system with low cost electromechanical set-up, low maintenance requirements and ease on installation and operation.

Design of a fast linear drive for (hybrid) circuit breakers – Development and validation of a multi domain simulation environment

The force acting on a current carrying body, which is induced by magnetic fields gained more interest due to new applications. These magnetic techniques are used for decades to accelerate or move objects, for instance for catheter navigation in the human body, metal forming or for fast opening of electrical circuit breakers. Due to the increase in short circuit power in most grid systems, and thereby larger prospective currents, conventional AC and DC switches lose interest. This has led to an increased interest in faster and hybrid switching techniques. For this reason a novel electro-mechanical set-up has been developed, which accelerates a movable electrical contact extremely fast by using the combination of Lenz law and the Lorentz force. This contribution describes the mixed domain simulation environment and the validation of the set-up, which consist of a linear electro-magnetic drive and a mechanical damper system. The prototype used for validation is capable to generate a maximum driving force of approximately 200 kN, which accelerates the movable contact of 2.7 kg to 18 m s −1. Initial simulations have been compared with the measurements and the results are in good agreement. This tool can be used to develop generic hybrid circuit breakers, reduces the risk for switchgear manufacturers and speed up the introduction of hybrid switch systems, which is urgently needed due to the ever increase of short circuit power in grid systems and the introduction of DC grid systems.

Design and construction of a two-axis Sun tracking system for parabolic trough collector (PTC) efficiency improvement

An experimental study was performed to investigate the effect of using a continuous operation two-axes tracking on the solar energy collected. The collected energy was measured and compared with that on a fixed surface tilted at 40° towards the South. The results indicate that the measured collected solar energy on the moving surface was significantly larger (up to 46.46%) compared with the fixed surface. The proposed two-axis Sun tracking system was characterized by a fairly simple and low-cost electromechanical set-up with low maintenance requirements and ease on installation and operation.