Electrode Material For Storage Research Articles

Samarium-doped vanadium pentoxide nanorods anchored reduced graphene oxide nanocomposite as a bi-functional electrode material for supercapacitor and direct methanol oxidation fuel cell applications

In this work, we demonstrate a novel, facile synthesis of reduced graphene oxide nanosheets decorated samarium-doped vanadium pentoxide (RGO/Sm:V2O5) nanocomposite material and explore its application toward supercapacitor and direct methanol oxidation process. As-fabricated material and electrode were well-characterized to evaluate its surface morphology and functionalities. Results indicate a maximum capacitance value of 544 F/g for RGO/Sm:V2O5 modified electrode than the 2% Sm:V2O5 (346 F/g) and V2O5 (133 F/g) modified electrodes. In addition, an excellent Rct value (3.2 Ω) was achieved for the RGO-loaded Sm:V2O5 electrode than the 2% Sm:V2O5 electrode (4.7Ω). The RGO/Sm:V2O5 electrode also shows higher cyclic efficiency (98 %) at the 1000th cycle than the non-RGO loaded Sm:V2O5 electrodes. Furthermore, the fabricated electrodes were also examined for the direct methanol oxidation performances, and the results indicate a higher current density value of 181 mA/cm2 for RGO/Sm:V2O5 electrode than 2% Sm:V2O5 electrode (139 mA/cm2). The excellent electrochemical performance of the RGO/Sm: V2O5 electrode is mainly due to the presence of RGO nanosheet in the synthesized nanocomposite material. Therefore, as-prepared material can be applied as an excellent alternative electrode material for energy storage and conversion systems.

Preparation of Nb5+ Doped Na3V2(PO4)3 Cathode Material for Sodium Ion Batteries.

Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) due to the abundance and low cost of sodium resources. Cathode material plays a crucial role in the performance of sodium ion batteries determining the capacity, cycling stability, and rate capability. Na3V2(PO4)3 (NVP) is a promising cathode material due to its stable three-dimensional NASICON structure, but its discharge capacity is low and its decay is serious with the increase of cycle period. We focused on modifying NVP cathode material by coating carbon and doping Nb5+ ions for synergistic electrochemical properties of carbon-coated NVP@C as a cathode material. X-ray diffraction analysis was performed to confirm the phase purity and crystal structure of the Nb5+ doped NVP material, which exhibited characteristic diffraction peaks that matched well with the NASICON structure. Nb5+-doped NVP@C@Nbx materials were prepared using the sol-gel method and characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Raman and Brunauer -Emmett-Teller (BET) analysis. First-principles calculations were performed based on density functional theory. VASP and PAW methods were chosen for these calculations. GGA in the PBE framework served as the exchange-correlation functional. The results showed the NVP unit cell consisted of six NVP structural motifs, each containing octahedral VO6 and tetrahedral PO4 groups to form a polyanionomer [V2(PO4)3] along with the c-axis direction by PO4 groups, which had Na1(6b) and Na2(18e) sites. And PDOS revealed that after Nb doping, the d orbitals of the Nb atoms also contributed electrons that were concentrated near the Fermi surface. Additionally, the decrease in the effective mass after Nb doping indicated that the electrons could move more freely through the material, implying an enhancement of the electron mobility. The electrochemical properties of the Nb5+ doped NVP@C@Nb cathode material were evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectric spectroscopy (XPS). The results showed that NVP@C@Nb0.15 achieved an initial discharge capacity as high as 114.27 mAhg-1, with a discharge capacity of 106.38 mAhg-1 maintained after 500 cycles at 0.5C, and the retention rate of the NVP@C@Nb0.15 composite reached an impressive 90.22%. NVP@C@Nb0.15 exhibited low resistance and high capacity, enabling it to create more vacancies and modulate crystal structure, ultimately enhancing the electrochemical properties of NVP. The outstanding performance can be attributed to the Nb5+-doped carbon layer, which not only improves electronic conductivity but also shortens the diffusion length of Na+ ions and electrons, as well as reduces volume changes in electrode materials. These preliminary results suggested that the as-obtained NVP@C@Nb0.15 composite was a promising novel cathode electrode material for efficient sodium energy storage.

Heteroatom(S) (N, S, P) Co‐Doped Reduced Graphene Oxide‐Based Binder‐Free Novel Energy Storage Electrode Material for High Energy Density Supercapacitor

AbstractThis manuscript reports a one‐pot synthesis of ternary heteroatoms (N/S/P) co‐doped reduced graphene oxide as an electrode material by simultaneous reduction/doping of/into graphene oxide employing eco‐friendly natural molecule(s) (thiamine monophosphate (TM) and thiamine pyrophosphate (TP)) under mild heating (≤60 °C) and near‐neutral pH (≤8) conditions. It produces N, S, P co‐doped rGO‐TM and N, S, P co‐doped rGO‐TP nanohybrids displaying a well‐connected porous microstructure with significantly doped atomic(%) ‐N (10.0%), S (4.1%), P (0.1%) and N (6.7%), S (2.0%), and P (0.5%), respectively. The symmetric supercapacitor designed using N, S, P‐rGO‐TM‐10 in water‐in‐salt 17 m NaClO4 electrolyte exhibits stable cell voltage of 3.0 V, superb gravimetric energy density (areal energy density) of 47.9 Wh kg−1@522.8 W g−1 (0.2363 Wh cm−2@ 2.5 W cm−2); the excellent cyclic stability (88.8 %) and Coulombic efficiency (99.2%) even after 20 000 cycles. Their energy storage capability is corroborated by the illumination of 109 white LEDs upon lighting a single SSC for 50 s each, driving a motor to run a fan, and forming the tandem device by joining three such cells in series.

A new FeS2/N-C nanoparticle from NH2-MIL-101 for high performance lithium ion batteries

Among multitudinous lithium storage electrode materials, transition metal sulfides have attracted widespread attention because of high theoretical capacity and wide availability. However, these anodes still suffer poor capacity retention and limited cycle life. Metal organic frameworks (MOFs) are important precursors for fabricating functional materials for energy conversion and storage. A study of their derivatization process is of great significance for the design of materials with specific functional properties. In this paper, a new FeS2/N-C nanoparticle is synthesized by calcination strategy from NH2-MIL-101 prepared by solvothermal method. Due to the coordination effect of nitrogen-doped carbon and special particle morphology, the synthesized FeS2/N-C nanoparticles have superior cycling stability and high reversible capacity. This work provides a better understanding of the carbonization process of MOFs and reveals the effect of N-doped and MOF synthesis time on transition metal sulfides.

Morphologically tailored NiMn2O4nanocubic material for high energy-power density asymmetric supercapacitor and non-enzymatic H2O2 sensing

Developing an advanced material for energy storage and sensors is considered a key solution to meet future energy demands and economic challenges. The inverse spinel-structured NiMn2O4 emerges as a promising electrode material for next-gen energy storage due to its notable power capability, high energy density, and excellent cyclic stability. Nanostructuring enhances features not achievable in bulk materials, with a mixed morphology of nano-cubic and nanoflakes optimizing surface-to-volume ratio for effective use in energy storage devices. The addition of PVP as a surfactant, transforms the diffusion-controlled behavior to a capacitive mechanism, enhancing energy density and cyclic stability. Electrodes exhibit a specific capacitance of 816 F g−1 at 1 A g−1 and stable cyclic behavior over 5000 cycles in 1 M KOH. The constructed ASC device shows 96% cyclic stability over 10,000 cycles, maintaining an energy density of 8.8 Wh kg−1 at 6400 W kg−1 and reaching a maximum of 36.55 Wh kg−1 at 400 W kg−1. Electronic structural characteristics explained through density functional theory (DFT) contribute insights. Furthermore, the non-enzymatic NiMn4/GCE H2O2 sensor demonstrates high sensitivity, a low detection limit, and remarkable selectivity against various biological interferences across a broad concentration range.

Cycling Stability of a 2D Pristine MOF Supercapacitors

AbstractTwo‐dimensional (2D) metal–organic frameworks (MOFs) have been a worldwide research interest due to their potential application in supercapacitors. Herein, a cobalt‐based layered MOF ([Co2(μ‐SO4)(Hppza)2(H2O)3]n, namely, SEU‐1; H2ppza=3‐(pyridin‐4‐yl)‐1H‐pyrazole‐5‐carboxylic acid) has been synthesized via a one‐step solvothermal method. Single X‐ray diffraction analysis shows that the SEU‐1 exhibits a (3,3,4)‐connected 2D structure with a Schläfli symbol of (62 ⋅ 8)(63)(64 ⋅ 8 ⋅ 10). Variable‐temperature magnetic susceptibility data display that antiferromagnetic interactions between two CoII ions exist in SEU‐1. The supercapacitive performance has been evaluated in the three‐electrode system. Its maximum specific capacitance is 145.5 F g−1 at 1 A g−1, along with the specific capacitance retention of 92.7 % at the current density of 5 A g−1 after 6000 cycles in 3 M KOH solution. These results demonstrate that SEU‐1 is a good candidate for electrode material for electrochemical energy storage.

Electrochemical Investigation of Lithium Perchlorate-Doped Polypyrrole Growing on Titanium Substrate

Lithium perchlorate-doped polypyrrole growing on titanium substrate (LiClO4-PPy/Ti) has been fabricated to act as electroactive electrode material for feasible electrochemical energy storage. A theoretical and experimental investigation is adopted to disclose the conductivity, electroactivity properties and interfacial interaction-dependent capacitance of LiClO4-PPy/Ti electrode. The experimental measurement results disclose that LiClO4-PPy/Ti reveals lower ohmic resistance (0.2226 Ω cm−2) and charge transfer resistance (2116 Ω cm−2) to exhibit higher electrochemical conductivity, a more reactive surface, and feasible ion diffusion to present higher double-layer capacitance (0.1930 mF cm−2) rather than LiClO4/Ti (0.3660 Ω cm−2, 65,250 Ω cm−2, 0.0334 mF cm−2). LiClO4-PPy/Ti reveals higher Faradaic capacitance caused by the reversible doping and dedoping process of perchlorate ion on PPy than the electrical double-layer capacitance of LiClO4/Ti caused by the reversible adsorption and desorption process of the LiClO4 electrolyte on Ti. Theoretical simulation calculation results prove that a more intensive electrostatic interaction of pyrrole N···Ti (2.450 Å) in LiClO4-PPy/Ti rather than perchlorate O···Ti (3.537 Å) in LiClO4/Ti. LiClO4-PPy/Ti exhibits higher density of states (57.321 electrons/eV) at Fermi energy and lower HOMO-LUMO molecule orbital energy gap (0.032 eV) than LiClO4/Ti (9.652 electrons/eV, 0.340 eV) to present the enhanced electronic conductivity. LiClO4-PPy/Ti also exhibits a more declined interface energy (−1.461 × 104) than LiClO4/Ti (−5.202 × 103 eV) to present the intensified interfacial interaction. LiClO4-PPy/Ti accordingly exhibits much higher specific capacitances of 0.123~0.0122 mF cm−2 at current densities of 0.01~0.10 mA cm−2 rather than LiClO4/Ti (0.010~0.0095 mF cm−2, presenting superior electroactivity and electrochemical capacitance properties. LiClO4-PPy/Ti could well act as the electroactive supercapacitor electrode for feasible energy storage.

Surface exsolved NiFeOx nanocatalyst for enhanced alkaline oxygen evolution catalysis

A synergistically improved alkaline oxygen evolution catalyst of the NiFeOx nanoalloy oxide structure is introduced using an in-situ exsolution method. The separately doped Ni and Fe ions are exsolved on the surface of the perovskite as homogeneously distributed NiFeOx oxide alloy catalysts via following reduction and oxidation processes. The incorporation of additional Fe into the surface embedded NiFeOx catalyst improved the inherent oxygen evolution reaction (OER) property with fast reaction kinetics. Density functional theory (DFT) result indicates the lowest OER overpotential of NiFeOx catalyst is originated from the reduced energy barrier of surface *O formation from *OH group. The NiFeOx exsolved catalyst shows the smallest overpotential of 0.49 V (j = 10 mA∙cm−2) and Tafel slope (93 mV∙dec-1), compared with that of single NiO (0.54 V, 132 mV∙dec-1) and Fe3O4 catalyst. This study provides an effective method for developing nanosized OER catalysts for various energy conversion and storage electrode materials.

Dibutyl benzotriazolium tetrafluoroborate doped PANI as an electrode material for energy storage

This work is on the reporting of the synthesis of 1,3-dibutyl-1,2,3-benzotriazolium tetrafluoroborate-doped polyaniline through interfacial polymerization and its material characterizations through FT-IR, XRD, EDS, FESEM, XPS, BET, and TGA and electrochemical property evaluation through CV, EIS, and GCD. The electrode was tested in an ionic liquid electrolyte solution with a 3-electrode setup, which gave an effective potential window from −1.5 to 1.0 V. PANI-DIBUTBTBF4 electrodes were tested on benzotriazolium tetrafluoroborate gel polymer electrolyte using poly(vinylidenefluoride-co-hexafluoropropylene) as host polymer for supercapacitor application through evaluating the electrochemical properties of the fabricated prototype with CV, EIS, and GCD. The SC prototype showed an efficient electrochemical window of 3.5 V. And at 0–3.5 V, it shows a high specific capacitance of 1417.88 F g−1 at a scan rate of 2 mV s−1, and from the galvanostatic charge discharge cycle at a current density of 0.32 A g−1, an energy density of 7.11 mW h g−1 and a power density of 555.06 mW g−1 were observed. The prototype retains a capacitance of 89 % even after 3000 cycles. A single swagelok cell charged at 2 V for 20 min was able to light a red (1.6 V, 20 mA) LED brightly for 5 min, which demonstrated its practical applicability.

Towards sustainable solar energy solutions: Harnessing supercapacitors in PV systems

The integration of supercapacitors in photovoltaic (PV) energy systems holds immense potential for enhancing energy storage, reliability, and efficiency. This article provides a comprehensive overview of recent advancements, challenges, and opportunities in the utilization of supercapacitors within PV systems. Fundamental principles of supercapacitor operation, including charge storage mechanisms and electrode materials, are discussed, highlighting their unique advantages such as high power density and rapid charge/discharge capabilities. Various integration strategies, including parallel and series configurations, as well as system-level control algorithms, are examined to optimize energy management and performance. Case studies and real-world examples demonstrate the effectiveness of integrated PV and supercapacitor systems across different applications and scales. According to the results of the research, 235 publications have been made on the subject in the last fifteen years and the number of publications has doubled in the last five years. Additionally, future research directions focus on improving energy density, efficiency, and cost-effectiveness, as well as addressing challenges related to temperature sensitivity and system scalability. Overall, the integration of supercapacitors in PV systems offers promising solutions for advancing sustainable energy solutions and accelerating the transition towards a cleaner, greener future.

Imine-Linked π-Conjugated Covalent Organic Frameworks as an Efficient Electrode Material for Pseudocapacitive Energy Storage

Imine-Linked π-Conjugated Covalent Organic Frameworks as an Efficient Electrode Material for Pseudocapacitive Energy Storage

Manganese ferrite/reduced graphene oxide composites as energy storage electrode materials for supercapacitors

Manganese ferrite/reduced graphene oxide composites as energy storage electrode materials for supercapacitors

Membrane based In-situ reduction of graphene oxide for electrochemical supercapacitor application

Reduced graphene oxide (rGO) is a widely studied electrode material for energy storage, however, its strong re-stacking tendency during chemical reduction always leads to a degraded specific surface area and thus limits its performance. Therefore, it is necessary to control the morphology of rGO during the reduction process. Here, we develop a novel in-situ membrane-based method for the reduction of graphene oxide (GO) using a green and efficient vitamin C (VC) aqueous solution as reductant. The obtained electrode material (vitamin C reduced GO via membrane-based method, VG-M) exhibits a specific capacitance of 174 F/g at 1 A/g and 75.9% of retention at 40 A/g, which is about 9 times better than the highly self-stacked material from conventional methods (vitamin C reduced GO via stirring method, VG-S). This designed method successfully achieves the maintenance of rGO sheet morphology through laminar confinement in GO membrane and presents a simple approach towards two-dimensional (2D) material morphology control.

The effect of nickel oxide in the direct growth of MnOx on Ni foam by chemical vapor deposition

Manganese oxide has emerged as a promising material for use as a charge storage electrode material. In this work, we demonstrate the low-pressure chemical vapour deposition (CVD) growth of manganese oxide conformal coatings on Ni-foams utilising an MnCl2 solid source precursor, utilising an oxide formed on the surface of the Ni-foam as an oxygen reservoir for the synthesis of a predominantly MnO x layer. The resulting MnO x layer is highly dependent on sample pre-treatment, owing to modifications in the Ni oxide layer. The phase structure, electronic states, morphology, and electrochemical analysis were determined by x-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning-electron microscopy (FE-SEM), and capacitance–voltage (CV) measurements. The importance of the oxide layer is demonstrated by modifying the thickness of the NiO layer over the Ni foam, with clear changes in the resultant structure, morphology, and areal capacitance, with the highest performance MnO x coating found to be obtained without any oxide removal from the Ni foam substrate.

Low-Temperature and Fast-Charge Sodium Metal Batteries.

Low-temperature operation of sodium metal batteries (SMBs) at the high rate faces challenges of unstable solid electrolyte interphase (SEI), Na dendrite growth, and sluggish Na+ transfer kinetics, causing a largely capacity curtailment. Herein, low-temperature and fast-charge SMBs are successfully constructed by synergetic design of the electrolyte and electrode. The optimized weak-solvation dual-salt electrolyte enables high Na plating/stripping reversibility and the formation of NaF-rich SEI layer to stabilize sodium metal. Moreover, an integrated copper sulfide electrode is in situ fabricated by directly chemical sulfuration of copper current collector with micro-sized sulfur particles, which significantly improves the electronic conductivity and Na+ diffusion, knocking down the kinetic barriers. Consequently, this SMB achieves the reversible capacity of 202.8mAhg-1 at -20°C and 1C (1C = 558mAg-1 ). Even at -40°C, a high capacity of 230.0mAhg-1 can still be delivered at 0.2C. This study is encouraging for further exploration of cryogenic alkali metal batteries, and enriches the electrode material for low-temperature energy storage.

Binary metallic sulphide‐based nanocomposites with ZnO additives: A dual‐functioning electrode material for energy storage and glucose sensing

AbstractIn the contemporary age, there is a growing need for innovative energy storage solutions that integrate the crucial features of supercapacitors and rechargeable batteries to meet evolving energy requirements. Herein, we used the hydrothermal method to synthesize a binary composite electrode material. The addition of ZnO as a doping material significantly enhances the specific capacity of cobalt niobium sulphide (CoNbS) from 538.16 C g−1 to 912.62 C g−1 due to its high conductivity and the presence of redox‐active sites. We have also developed a supercapattery (CoNbS@ZnO//activated carbon [AC]), which has demonstrated outstanding performance with a remarkable specific capacity of 325.92 C g−1 at a current density of 1.5 A g−1. Furthermore, the supercapattery device shows improved energy and power densities, measuring 35 Wh/kg and 2397 W/kg, respectively. After 5000 galvanostatic charging discharging (GCD) cycles, the device shows columbic efficiency (90%) and capacity retention (83%). Additionally, the CoNbS@ZnO//AC hybrid device is used as an electrochemical sensor for glucose detection. The device showed a high sensitivity against the glucose and detected up to a small value. The synthesis of nanomaterials opens up new opportunities to create high‐performance energy related systems.

Ultrafast and Durable Sodium-Ion Storage of Pseudocapacitive VN@C Hybrid Nanorods from Metal-Organic Framework.

Vanadium nitride (VN) is a promising electrode material for sodium-ion storage due to its multivalent states and high electrical conductivity. However, its electrochemical performance has not been fully explored and the storage mechanism remains to be clarified up to date. Here, the possibility of VN/carbon hybrid nanorods synthesized from a metal-organic framework for ultrafast and durable sodium-ion storage is demonstrated. The VN/carbon electrode delivers a high specific capacity (352mA h g-1 ), fast-charging capability (within 47.5 s), and ultralong cycling stability (10000 cycles) for sodium-ion storage. In situ XRD characterization and density functional theory (DFT) calculations reveal that surface-redox reactions at vanadium sites are the dominant sodium-ion storage mechanism. An energy-power balanced hybrid capacitor device is verified by assembling the VN/carbon anode and active carbon cathode, and it shows a maximum energy density of 103Wh kg-1 at a power density of 113W kg-1 .

Organic polymer coating induced multiple heteroatom-doped carbon framework confined Co1-xS@NPSC core-shell hexapod for advanced sodium/potassium ion batteries

Synthesis of advanced structure and multiple heteroatom-doped carbon based heterostructure materials are the key to the preparation of high-performance energy storage electrode materials. Herein, the hexapod-shaped Co1-xS@NPSC has been triumphantly prepared using hexapod ZIF-67 as the sacrificial template to prepare Co1-xS inner core and N, P, and S tri-doped carbon (NPSC) as the shell through the carbonization of the organic polymer precursor. When applied as anode for Na+ batteries (SIBs) and K+ batteries (PIBs), Co1-xS@NPSC presents the high reversible specific capability of 747.4 mAh/g at 1.0 A/g after 235 cycles and 387.8 mAh/g at 5.0 A/g after 760 cycles for SIBs, as well as 326.7 mAh/g at 1.0 A/g after 180 cycles for PIBs. The excellent storage capacity and rate capability of Co1-xS@NPSC is ascribed to hexapod structure of ZIF-67 unlike the common dodecahedron, which is constructed with interior porous and exterior framework repository, donating supplemental active sites, and doping of multiple heteroatoms forming organic polymer coating inhibiting the volume expansion and restrains the agglomeration of Co1-xS nanoparticles. This approach has paved a bright avenue to exploit promising anode materials with novel structure and hetero-atom doping for high-performance energy storage devices.

A new frontier of flexible energy devices: Aqueous proton supercapacitors

Aqueous proton supercapacitors are considered as promising energy storage devices for next-generation wearable electronics due to their high energy density, rapid kinetics, long cycles, and reliable safety. As of now, the research for electrochemical proton energy storage entails more holistic considerations. In this review, we provide a timely and comprehensive review of recent advances in electrochemical proton storage. First, we discuss the main explored proton storage electrode materials, including carbon materials, metal oxides, Prussian blue, COFs, and MXenes, from the aspects of structure, preparation strategy, and proton storage mechanism. Furthermore, we systematically focus on their multifunctional applications of proton supercapacitors including flexible and wearable electronics, anti-freezing energy storage system, etc. Finally, the challenges and prospects of flexible proton supercapacitors are outlined. We believe that this review will greatly improve the knowledge of proton energy storage and facilitate the development of advanced electrochemical energy systems.

Energy utilization of agricultural waste: Machine learning prediction and pyrolysis transformation

The rapid screening of agricultural waste materials for capacitor preparation holds significant importance in comprehending the relationship between material properties and enhancing experimental efficiency. In this study, we developed two machine learning models to predict electrode material characteristics using 2997 data points extracted from 235 articles. The identification and influence of key features on prediction indices provide a theoretical foundation for subsequent practical preparation. Through regression analysis and index evaluation, corn straw emerged as the optimal material for capacitor preparation, leading us to propose a one-step activation and two-step modification approach to convert corn straw into porous biochar. By modifying biochar with Co(NO3)2·6H2O, the maximum electrode capacitance of porous carbon reached 732.6 F/g. Furthermore, the electrode exhibited exceptional cycle stability with a remaining capacitance of 96 % after 5000 cycles. The prepared symmetric capacitor demonstrated pseudocapacitance behavior with a capacitance of 183.15 F/g at a current density of 1.0 A/g, power density of 22 kW/kg, and energy density of 9.03 Wh/kg. Considering the increasing annual output of corn straw and its superior industrial application prospects compared to acid-, base-, or precious metal-based alternatives due to their cost-effectiveness and environmental friendliness, these findings highlight the potential practical value in utilizing modified corn straw biochar as an efficient energy storage electrode material.